0K - Nachrichten f�r 'Allgemeine Listbausteine'
The following messages are stored in message class 0K: Nachrichten f�r 'Allgemeine Listbausteine'.
It is part of development package SLIS in software component BC-SRV-ALV. This development package consists of objects that can be grouped under "Generic list types".
It is part of development package SLIS in software component BC-SRV-ALV. This development package consists of objects that can be grouped under "Generic list types".
Message Nr ▲ | Message Text |
|---|---|
| 000 | & & & & |
| 001 | Position cursor on column header |
| 002 | Restrict the selection; maximum width of the results list exceeded |
| 003 | Desired operation cannot be performed for column '&' |
| 004 | Position the cursor on a line in the list |
| 005 | Select at least one column |
| 006 | Select at least one entry |
| 007 | "To" value is less than "From" value |
| 008 | A maximum of & lines are allowed |
| 009 | Input value is too big |
| 010 | Filter set |
| 011 | Filter deleted |
| 012 | List has been sorted |
| 013 | Subtotals have been calculated |
| 014 | Sums have been calculated |
| 015 | Layout was applied |
| 016 | Subtotals cannot be calculated using item characteristics |
| 017 | No layouts found |
| 018 | Layout saved |
| 019 | Layout(s) deleted |
| 020 | Layouts were saved |
| 021 | Subtotal criteria cannot be saved without sort criteria |
| 022 | Layout & already exists and is completely overwritten |
| 023 | Source and target client are identical, so import is not possible |
| 024 | Layout(s) imported |
| 025 | No layouts were passed for transport. |
| 026 | No valid transport request chosen. |
| 027 | Layout(s) were added to transport request & |
| 028 | & SAP layouts for standard reports imported. |
| 029 | No SAP standard report layouts imported. |
| 030 | SAP standard report layouts not flagged. |
| 031 | Basic list recreated |
| 032 | Total step does not exist |
| 033 | Place the cursor on a totals line |
| 034 | Layout maintenance locked by user & |
| 035 | Choose one line only for this function |
| 036 | The name of layout & is in the SAP standard layout namespace |
| 037 | Selection contains layouts which cannot be transported |
| 038 | There is no layout information for the current list |
| 039 | Position the cursor on a non-total line |
| 040 | Position the cursor on a layout |
| 041 | No filter can be used on the field & |
| 042 | Position cursor on the appropriate sublist |
| 043 | Subtotals can only be used in lists with column totals |
| 044 | Choose only list columns for filter operations |
| 045 | Choose the column up to which you want to fix |
| 046 | Choose exactly one column to fix |
| 047 | Column fix canceled |
| 048 | Column(s) fixed |
| 049 | A standard layout with the name & already exists |
| 050 | A user layout with the name & already exists |
| 051 | The field & cannot be totalled because of field overflow |
| 052 | Standard layouts must start with the special character & |
| 053 | Use standard layout namespace (see long text) |
| 054 | User-specific layouts must start with a letter (A-Z) |
| 055 | SAP standard layouts cannot be deleted |
| 056 | Generic filter conditions are not supported for intervals |
| 057 | Choose one ratio column |
| 058 | The filter criteria are ignored by this function |
| 059 | Spreadsheet cannot be called (return code &) |
| 060 | Subtotals cannot be calculated over totalizable fields |
| 061 | No totals can be calculated because of overflow of field & |
| 062 | The object selection is ambiguous for this function |
| 063 | Multiple lines are only supported for printing and in print view |
| 064 | Filter criteria, sorting, totals, and subtotals are ignored |
| 065 | Search string &1 not found |
| 066 | Last selected entry reached |
| 067 | First selected entry reached |
| 068 | Mean values are ignored in the graphic |
| 069 | Layout &1 already exists |
| 070 | Overwrite layout &1? |
| 071 | No errors were found |
| 072 | Specify a user name |
| 073 | No layout found |
| 074 | Values not complete due to field overflow |
| 075 | Field & is hidden; value could not be applied |
| 076 | ABC analysis not possible here |
| 077 | Conversion error occurred |
| 078 | ABC analysis is not possible for field & because of field overflow |
| 080 | Make two specifications |
| 081 | Discrepancy between sorting and limits |
| 082 | The total must amount to & |
| 084 | Value checked for F4 help |
| 085 | Other fields are checked before the F4 help |
| 086 | Field are changed after the F4 help |
| 087 | Your F4 help could be displayed here &1 &2.. |
| 088 | Column 7 receives a new value |
| 089 | Only those sort criteria are deleted that represent no subtotals |
| 090 | Maximum number of filter criteria exceeded (max = 74) |
| 091 | Error in print parameter |
| 092 | Not all data was added to the clipboard |
| 093 | Filter condition of reference field was adjusted |
| 094 | Masked fields are not displayed. |
| 099 | Too many rows in editable grid (&1 > &2) |
| 100 | ***** Definition of List Layouts **** |
| 101 | Mandatory display fields cannot be hidden |
| 102 | Maximum list width (& characters) exceeded |
| 103 | First move a field into the clipboard with 'Cut' |
| 104 | Position the cursor on a display field or in the supply of fields |
| 105 | List does not contain any value fields |
| 106 | Insert not possible here |
| 107 | Select only one line as the insertion point |
| 108 | Transfer at least one field into the display |
| 109 | Select only one line to be cut |
| 110 | First select the field to be cut |
| 111 | Header fields cannot be added to an item line |
| 112 | Item fields cannot be added to a header line |
| 113 | No fields chosen. |
| 114 | Maximum number of columns & exceeded. |
| 115 | Mandatory sort fields cannot be removed |
| 116 | A maximum of & sort fields is allowed |
| 117 | No sort defined |
| 118 | No filter criterion has been defined. |
| 119 | Last entry cannot be removed |
| 120 | The style of a cell cannot be changed in check mode |
| 121 | A new style is assigned to column 4 in row 3 |
| 122 | Value 234.99 and a style passed to column 4 in row 2 |
| 123 | Value 234,99 passed to column 4 in row 2 |
| 124 | Value with syntax errors passed to column 4 in row 2 |
| 125 | The style of a cell cannot be changed in check mode |
| 126 | Column 2 in row 1 changed to 55 in table |
| 127 | Filter criteria cannot be changed! |
| 130 | Error during creation of subtotals |
| 159 | & & & & |
| 171 | Settings for fields & were saved |
| 200 | Program & not found |
| 201 | Program & used |
| 202 | Data conversion error in file &. |
| 203 | & run error |
| 204 | Selected layout does not exist |
| 205 | No selection |
| 206 | HTML download not possible due to missing data |
| 210 | Select a valid cell |
| 300 | *** Extract *** |
| 301 | Could not create extract & |
| 302 | Extract key was not completely specified (field: & ) |
| 303 | Extract & created |
| 304 | Extract & does not exist |
| 305 | Obsolete extract structure. Extract & can no longer be read |
| 306 | Extract & was read |
| 307 | Extract & already exists and will be completely overwritten |
| 308 | Enter an extract name |
| 310 | Extracts deleted successfully |
| 312 | More seats are occupied than available on the plane |
| 316 | There could be a function here |
| 321 | EVENT After - User - Command: Economy class changed if required |
| 322 | EVENT User - Command: OK_CODE is read |
| 400 | ************************BDS/Excel/Crystal |
| 401 | Template must not be deleted. No self-defined template. |
| 402 | No template chosen |
| 403 | Upload successful |
| 404 | Wrong template name, only SAP_OM.XLS or SAP_MM.XLS allowed |
| 405 | Wrong template name, only CUS_* allowed |
| 406 | Template name not allowed: & |
| 407 | Contact your system administrator. The following template is missing: & |
| 408 | Template already exists. No upload possible |
| 409 | Wrong template name. Only SAP_* allowed |
| 410 | No template exists for selected view |
| 411 | KPro error occurred & & |
| 412 | Template not found in BDS & & |
| 413 | Authorization problem & & |
| 414 | Error due to wrong parameters (BDS) & & |
| 415 | Action canceled by user |
| 416 | Process canceled due to internal conversion problems |
| 417 | More than 255 columns visible; switching to Excel not possible |
| 418 | Volume of data cannot be processed by Excel |
| 420 | Crystal reports is deactivated on your system |
| 499 | ****** Messages 500 - 600 only for consistency checks ******** |
| 500 | No inconsistencies were found |
| 501 | The callback program & does not exist |
| 502 | Form & for event & does not exist in the program & |
| 503 | Output table does not contain any entries |
| 504 | Header table & does not contain any entries |
| 505 | Item table & does not contain any entries |
| 506 | The field & & does not exist in the output table & & |
| 507 | Status without excluding table set in callback routine & |
| 508 | No status set in callback routine & |
| 509 | Referred units field & does not exist in the output table & |
| 510 | No field catalog entry exists for referred units field & |
| 511 | & & of field & & is unknown |
| 512 | Reference field & of reference structure & is not in ABAP Dictionary |
| 513 | Data element & does not exist & |
| 514 | Data type of field & is different from the field catalog definition |
| 515 | Maximum list width & exceeded |
| 516 | You tried to output & columns, but max. & are allowed |
| 517 | No field catalog passed |
| 518 | The field & already has a field catalog entry |
| 519 | Output by a not-released module of func. gr. KKBL |
| 520 | Program & for layout & does not exist |
| 521 | Program & for layout & not the same as callback program & |
| 522 | Program (IS_VARIANT-REPORT) not specified |
| 523 | No header table/item table link passed |
| 524 | Header table/item table link not completely defined |
| 525 | Item table key not completely specified |
| 526 | Sort criterion & is not in field catalog |
| 527 | Sort criterion & is not a list output column |
| 528 | Sort criterion & is a technical field |
| 529 | No callback program passed |
| 530 | Field catalog not found |
| 531 | Callback event & does not exist |
| 532 | Contradictory callback routines in interface and IT_EVENTS |
| 533 | Value & is not allowed for the parameter I_SAVE |
| 534 | Program errors |
| 535 | The name of the layout to be saved was not specified |
| 536 | Invalid value & of the parameter I_CALLBACK_PROGRAM |
| 537 | The field & must be flagged as technical in the field catalog |
| 538 | Invalid value & of the field catalog parameter & |
| 539 | Complex output table record type does not allow all interactions |
| 540 | No field name exists in the field catalog for field & |
| 541 | Layout parameter program name is missing |
| 542 | Enter a name for the layout |
| 543 | No field catalog entry exists for field & & |
| 544 | Field catalog contains more than 99 columns to be output |
| 545 | Field catalog hyperlink handle &1 for column &2 does not exist |
| 546 | Hyperlink handle &1 in output table for column &2 does not exist |
| 547 | Field &1 has different data type (&2) and internal type (&3) |
| 548 | Quantity field &1 does not have a quantity unit |
| 549 | Amount field &1 does not have a currency |
| 550 | Field &1 has a wrong value &2 in FCAT-INTTYPE |
| 551 | Field &1 has a wrong value &2 in FCAT-DATATYPE |
| 552 | Reference &1 &2 is used more than once and may cause problems for F4 |
| 553 | Call of &1 within &2 is not allowed |
| 554 | Call &1 before &2 |
| 555 | Strings can be displayed with 128 characters at most |
| 556 | &1 is key field in the header table, but not in the item table |
| 557 | &1 is key field in the item table, but not in the header table |
| 558 | Field & is tabular and is displayed as part of a table |
| 559 | Data type of field & different in field catalog and data table |
| 599 | *********** Messages for import/export layouts |
| 600 | Select at least one layout of client &1 type &2 |
| 601 | Exports only possible from current client &1 |
| 602 | Only &1 &2 &3 may be exported |
| 603 | Layout changes saved successfully |
| 604 | Select a valid entry |
| 605 | SAP standard layouts cannot be deleted (see long text) |
| 606 | You are not authorized to define layouts |
| 607 | This report has not been released |
| 649 | ******************** Messages for update of layouts |
| 650 | No update of layouts without text was performed |
| 651 | Tooltip for icon &1 is missing - column: &2 |
| 652 | Tooltip for exception field &1 is missing - column: &2 |
| 653 | Tooltip for symbol &1 is missing - column: &2 |
| 654 | Column heading for column &1 is missing |
| 655 | Tooltip for column &1 is missing |
| 656 | Heading for list is missing |
| 657 | Avoid callback BEFORE_LINE_OUTPUT |
| 658 | Avoid callback AFTER_LINE_OUTPUT |
| 659 | Column headings are suppressed |
| 660 | Tooltip for color &1 is missing - column: &2 |
| 661 | Only the first 99 data rows (number coulmns) are output |
| 699 | *********** Messages for Web function |
| 700 | URL placed successfully into the clipboard |
| 701 | Report name required for generating the URL |
| 702 | The MiniALV Service Does Not Correspond With the ALV Tool |
| 892 | You have not set any delete parameters |
| 893 | Your selection could not be confirmed |
| 894 | You did not set any selection criteria |
| 895 | No appropriate templates found |
| 896 | &1 templates deleted |
| 897 | 'Error in Flush' occurred |
| 898 | For reasons of security, the delete function has not yet been released |
| 899 | Select at least one checkbox for deleting |