1H - BKK: Scheck-/Wechselverwaltung
The following messages are stored in message class 1H: BKK: Scheck-/Wechselverwaltung.
It is part of development package FKBS in software component IS-B-BCA-MPM. This development package consists of objects that can be grouped under "Bank Customer Accounts: Means of Payment Management".
It is part of development package FKBS in software component IS-B-BCA-MPM. This development package consists of objects that can be grouped under "Bank Customer Accounts: Means of Payment Management".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Check & & & & not available in stock (Please Check key) |
| 002 | Check (BkAre &, Acct No.&, Check Type &, Check No.& ) is Blocked |
| 003 | Check & & & & Successfully Blocked |
| 004 | Check & & & & Cannot Be Blocked As It Has Already Been Cashed |
| 005 | Check & & & & Was Successfully Created |
| 006 | No checks are available for the selection criteria |
| 007 | Check ( COCD &1, check type &2, check no. &3 ) already exists |
| 008 | Block code for check & & & & is invalid |
| 009 | Block date for check & & & & is invalid |
| 010 | Invalid status for check & & & & |
| 011 | Position type & is invalid (Please check) |
| 012 | No intervals available for bank area & in no. range object BKK_STOCK |
| 013 | Position&1 exists for Bank area&2, Position type&3, Internl account no.&4 |
| 014 | Block reason is invalid |
| 015 | Entry & & & & is not available in the position (Correct key?) |
| 016 | Position & & & & cannot be blocked |
| 017 | External no.&1 does not exist for Bk.ar&2, position type&3, account no.&4 |
| 018 | Position type & is not from position category check (Please check) |
| 019 | Select at least one line |
| 020 | Select at least one column |
| 021 | Maximum number of selected data (&) was reached |
| 022 | 'Number to' is smaller than 'number from' (Please correct) |
| 023 | Only purely numerical check numbers are permitted (Please correct) |
| 024 | Automatic check number issuing is not active |
| 025 | Entries for 'check number from/to' and 'number' are invalid |
| 026 | No status change for Bk.ar. &, account no. &, position type &, pos. no. & |
| 027 | Check number issuing type unknown for account & and check type & |
| 028 | Check Number Required on Presentation for Account No. & and Check Type & |
| 029 | Please Enter Check Number |
| 030 | Check Type & is Blocked for Account No. & (Bk.Area &) |
| 031 | Check No. & (Bk.Area &, Account No. &, Check Type & ) Is Invalid |
| 032 | Position Type & Is Already Blocked for Account No. & ( Bk. Area & ) |
| 033 | 'Blocked to' Date is Before 'Blocked from' Date |
| 034 | Check Type &1 is not permitted for Account &2 in Bank Area &3 |
| 035 | Position Data not Saved Successfully in the Database |
| 036 | Double Entry for Position Type & (Please Correct) |
| 037 | You can only select a maximum of one option (please correct) |
| 038 | Settings for account &, bank area & were saved successfully |
| 039 | Check numbers &1 to &2 were issued |
| 040 | No entry found in table BKKA4 for keys &1, &2, &3, &4 |
| 041 | Check type & exists more than once |
| 042 | The name for check type & could not be read (TBKKA1T) |
| 043 | Check (bank area &, account &, check type &, check no. &) has been cashed |
| 044 | No checks permitted for CpD account & (bank area &) |
| 045 | Check number entry invalid (see long text) |
| 046 | No check number entered |
| 047 | Check (bk.area: &1, check type: &2, check no.: &3) exists more than once |
| 048 | No authorization to & from & |
| 049 | Error during check stock update |
| 050 | User &1 has no authorization |
| 051 | Check type &1 does not exist |
| 052 | Select only output or reference |
| 053 | Checks were blocked |
| 054 | Check status &1 cannot be used in payment transaction |
| 055 | Check (bk.area &, account &, check type &, check no. &) was returned |
| 056 | Check (account &2, check type &3, check no. &4) already has status &1 |
| 057 | Check (bk.area &1, check type &2, no. &3) is assigned to another account |
| 058 | Maintain at least one check type |
| 059 | Changing stock type &1 can lead to duplicated check nos (long text) |
| 060 | Block was revoked |
| 061 | For these selection criteria only checks already blocked exist |
| 062 | The selection includes checks already blocked (Please correct) |
| 063 | Only checks with status 'issued' can be reassigned |
| 064 | The checks were allocated to account &. |
| 065 | The account number has not changed |
| 066 | The selection includes checks with the status: &1 (Please correct) |
| 067 | The selection includes checks which are not blocked (Please correct) |
| 068 | The selection includes checks which cannot be un-blocked |
| 069 | For these selection criteria there are no checks which can be blocked |
| 070 | Position &1 exists for Bank area &2, Position type &3 and Account no. &4 |
| 071 | The changes have been saved |
| 072 | Checks were deleted |
| 073 | No checks for deletion exist for the selection criteria |
| 074 | Stock &1 already exists (stack number &2) |
| 075 | Enter number of checks per stack |
| 076 | Check & (bk.area &, check type &, account &) cannot be deleted |
| 077 | Output was revoked |
| 078 | Please enter number of checks |
| 079 | The new value 'check number to' is invalid |
| 080 | Specify account number |
| 081 | Select one line only |
| 082 | The last stack (no. &) does not have the number of checks wanted |
| 083 | The check stack specified already has a follow-on stack |
| 084 | The stack specified is not the same check type as the follow-on stack |
| 085 | The follow-on stack specified (no. & ) does not exist |
| 086 | No check stacks exist for the selection criteria |
| 087 | Check stack (no. &) cannot be deleted - please correct |
| 088 | Error during deletion of check stacks |
| 089 | No deletable stacks exist for the selection criteria |
| 090 | Check type &1 already exists |
| 091 | The number of checks is too big |
| 092 | No stacks for issuing exist for the selection criteria |
| 093 | No check stacks exist that can be issued |
| 094 | Only & checks could be issued |
| 095 | The next stack (&) and stack & are not of the same category |
| 096 | The stack no. &1 in run no. &2 does not have the right status |
| 097 | You can only issue a stack once as next stack (no. &) |
| 098 | Only 1 stack per stock type can have status 'Being edited' (st. no. &/&) |
| 099 | There is already 1 stack on database with status 'Being edited' (no.&) |
| 100 | You can only change the status from 'Being edited' to 'Created' (no. &) |
| 101 | Specified 'Check no. from' for stack &, seq. no.& is too big (O.K. to &) |
| 102 | Please enter stack number |
| 103 | Only & checks could be issued from the stack (difference: &) |
| 104 | Dual control: Have check stack released by another user |
| 105 | The stack no. & (run no. &) does not exist |
| 106 | Select a line |
| 107 | A stack with the key: BkAr &, type &, no. &, run no. & already exists |
| 108 | Error reading the Customizing setting |
| 109 | Position successfully created |
| 110 | No check stacks exist for the selection criteria |
| 111 | Stack was successfully blocked |
| 112 | Only & checks could be issued (difference &) |
| 113 | Check stack was successfully created |
| 114 | Wrong parameter transfer for function module & |
| 115 | Checks were issued successfully |
| 116 | Some of the requested nos. already exist in a blocked stack (from & to &) |
| 117 | There is already a pos.type-independent setting for bk.area: &, locat.: & |
| 118 | Double entries for bank area: &, stack location: & |
| 119 | Location & is not defined in the system |
| 120 | You cannot delete stack location & - there are still check stacks |
| 121 | You cannot delete setting for location &, bank area &, position type & |
| 122 | No settings are maintained for stack location & and position type & |
| 123 | No provision for direct creation stack location &, bkarea &, pos. type & |
| 124 | Error reading from the database |
| 125 | There is no location entry - please complete |
| 126 | Original and new locations identical - please correct |
| 127 | The stack for editing is not released or blocked |
| 128 | Error in determining next stack |
| 129 | Error: Stack locations do not match |
| 130 | Some of the requested check nos belong to location: & |
| 131 | Stack location successfully deleted |
| 132 | Stack location & already exists |
| 133 | Stack location & cannot be deleted - there are still settings |
| 134 | There are still check stacks for location & - maintain new settings |
| 135 | Data saved successfully |
| 136 | Data deleted successfully |
| 137 | Check issuing not allowed for location &, bank area &, position type : & |
| 138 | Distribution check stack not allowed location &, Bk area &, pos.type & |
| 139 | Error: Intervals overlap - please correct |
| 140 | Error printing the checks |
| 141 | System error: Stack with no. & (seq. no. &) not found |
| 142 | Stack selected for appending is not position type & - please correct |
| 143 | Stack selected for appending does not belong to location & - correct |
| 144 | Error in determination of next sequential number |
| 145 | Error: No check stack was selected |
| 146 | Select a line in the lower table control |
| 147 | Select a line in the upper table control |
| 148 | Error in determination of location-dependent settings |
| 149 | Error during posting of charge for check issuing |
| 150 | Principle of dual control not active for location & and position type & |
| 151 | No customer function module was defined for printing |
| 152 | Error occurred during preparation of creation |
| 153 | Error during determination of stack number |
| 154 | Check number & does not exist for location ( & ) |
| 155 | Check number & does not belong to stack with number & |
| 156 | Check stack with number & already being edited |
| 157 | Not all existing stacks are displayed for adding |
| 158 | Check number & does not exist for location & |
| 159 | Check number intervals overlap - please correct |
| 160 | The check stacks have been successfully released |
| 161 | Stack (no. &, seq.no. &) has status & - release not possible |
| 162 | Only & checks can be blocked from stack no. & |
| 163 | 'Check number from' is higher than 'Check number to' - please correct |
| 164 | A check stack was already added to the stack with no. & (see log) |
| 165 | The selected stacks do not have the right status e.g.: & (long text) |
| 166 | Data was adjusted - please check and repeat the function |
| 167 | Check stacks with no. & and sequential no. & to & were created |
| 168 | Check stack with stack no. & and seq. no. & was created |
| 169 | Requested numbers do not belong to selected check stack |
| 170 | Check stacks successfully deleted |
| 171 | The selected check stack has not been released for issuing |
| 172 | The maximum sequential number is issued - please create a new stack |
| 173 | Error during output of notifications |
| 174 | No customer function module defined (event: 00010960) |
| 175 | System error during determination of internal acct number acct &1, bkar&2 |
| 176 | Error during determination of account holder for acct: &1, bank area: &2 |
| 177 | System error during determination of header data acct: &1, bank area: &2 |
| 178 | Check (bk ar &1 acct no. &2 type &3 check no. &4)'Issue requested' |
| 179 | Error during determination of bank area for bank county &1, bank key &2 |
| 180 | Error: 'Check number from' higher than 'Check number to' |
| 181 | No data was transferred. |
| 182 | Error during update of status |
| 183 | Check does not have correct status (see long text) |
| 184 | System error - determination ext. acct no. for int. no. &2 bank area &1 |
| 185 | Start XPRA RFBKXPR403_3 for entry of cashing date in table BKKA1 |
| 186 | Export BKKA1 for check management |
| 187 | Cashing date of table BKKA1 successfully updated |
| 188 | Error during update of database &1 |
| 189 | Update of &1 completed without errors |
| 190 | No data records for check management found in &1 |
| 191 | Error during writing of log for XPRA : RFBKXPR403_3 |
| 192 | Error during determination of location-dependent settings (see long text) |
| 193 | The created stacks must be released by another user |
| 194 | Check (bk area &1, acct no.&2, type &3, check no.&4) already transferred |
| 195 | Positions (posit. cat. &1) created from no. &2 to no. &3 |
| 196 | Position (BkAr &1, position type &2, position no. &3) already exists |
| 197 | The lock date &1 appears before the status change date &2 |
| 198 | The 'block-from' date &1 appears before the issue date &2 |
| 199 | The 'block-to' date &1 appears before the issue date &2 |
| 200 | No posting date exists for Bank Area &1' |
| 201 | The block-from date &1 appears before the current posting date |
| 202 | The lock-to date &1 appears before the current posting date |
| 203 | Checks already cashed cannot be locked |
| 204 | There are no checks with check typ &1 at account &2, &3 |
| 205 | Internal error &1 when preparing stack for update |
| 600 | & |