5A - Basis Personalmanagement
The following messages are stored in message class 5A: Basis Personalmanagement.
It is part of development package SP00 in software component BC-BMT-OM. This development package consists of objects that can be grouped under "Organization and Planning".
It is part of development package SP00 in software component BC-BMT-OM. This development package consists of objects that can be grouped under "Organization and Planning".
Message Nr ▲ | Message Text |
|---|---|
| 001 | No entry in table &1 for key &2 &3 &4 |
| 002 | No user-defined schedule exists |
| 003 | Save the user-defined schedule again |
| 004 | Select a plan version |
| 005 | Choose an object class |
| 006 | Enter an object ID with a maximum of eight characters |
| 007 | Select an infotype status |
| 008 | Select one infotype or status only |
| 009 | Error during input of infotype & |
| 010 | Select an infotype or enter a status |
| 011 | Field & is not an input field |
| 012 | Subtype &1 is not compatible with infotype &2 acc. to T778U |
| 013 | Infotype & is not supported at present |
| 014 | Select an infotype |
| 015 | Choose & |
| 016 | Adjust the relationship period to the object period |
| 017 | No data exists for infotype &1 in status &2 |
| 018 | Specify an object ID |
| 019 | Decrease the schedule or increase the interval |
| 020 | Schedule too long for chosen interval => no save |
| 021 | Schedule too long for chosen interval => no transfer |
| 022 | Record created |
| 023 | Record deleted |
| 024 | Data was saved |
| 025 | Schedule pattern too long for chosen interval |
| 026 | You may not choose more than 8 fields |
| 027 | Record was not changed |
| 028 | Relationship structure & & & not allowed |
| 029 | Object & & & has already a historical record flag |
| 030 | Record changed |
| 031 | Start date after end date |
| 032 | If you press ENTER, object & & & will be deleted |
| 033 | Object & & & was deleted |
| 034 | Object &1 &2 was created as copy of object &3 &4 |
| 035 | Object & & & already exists |
| 036 | Reference object & & & does not exist |
| 037 | Function cannot be executed for object type & |
| 038 | Error when creating relationship |
| 039 | Validity period of record not within validity period of & & |
| 040 | Object & & & does not exist |
| 041 | Substructure could not be created |
| 042 | & & deleted |
| 043 | For infotype &1 in status &2, function &3 is not allowed |
| 044 | &1 &2 created under &3 &4 |
| 045 | Object & & & archived (can only be displayed) |
| 046 | Index could not be generated |
| 047 | Object was not deleted |
| 048 | No allowed relationship for & & & found |
| 049 | Create was canceled |
| 050 | Preceding record will be extended at end |
| 051 | & & has been moved |
| 052 | Preceding record will be delimited at end |
| 053 | No allowed object type found |
| 054 | Personnel number & does not exist |
| 055 | Index has been re-generated |
| 056 | First record may not be deleted (time constraint 0 or 1) |
| 057 | No allowed relationship between &1 and &2 found |
| 058 | Choose positions only |
| 059 | &1 &2 created as of &3 |
| 060 | Object/infotype & is locked by user & |
| 061 | You have already locked object/infotype & |
| 062 | Global lock table is full, so record locking is not possible |
| 063 | Local lock table is full, so locking is not possible |
| 63 | Error messages for PP05 Infotype Copier |
| 064 | Locking is not possible |
| 065 | Object type & is not in Table T777O |
| 066 | Specify further positions on the next screen or press "Cancel" |
| 067 | Specify another position |
| 068 | Enter positions only |
| 069 | Specify an existing object |
| 070 | Specify a start date |
| 071 | Specify an end date |
| 072 | Specify an object ID |
| 073 | Maximum percentage can be 100.00 |
| 074 | Between types &1 and &2, relationship &3 &4 is not allowed -> T777E |
| 075 | Cost center &1 does not exist for controlling area &2 |
| 076 | Cost center & does not exist |
| 077 | Company code & is not defined in Table T001 |
| 078 | Personnel area & is not defined in Table T001W |
| 079 | Infotype 1008 CCode/Pers.area does not exist |
| 080 | If you press ENTER, object & & & will be copied |
| 081 | Object & & & is delimited on & |
| 082 | If you press ENTER, object & & & will be delimited |
| 083 | Enter an internal object type |
| 084 | Enter a valid infotype (see Table T778T) |
| 085 | Position the cursor correctly |
| 086 | No objects found without relationships |
| 087 | Object & & & is already delimited on & |
| 088 | Specify an object type |
| 089 | Object locked |
| 090 | Object & & & will be delimited |
| 091 | Caution: You have not saved your entries yet |
| 092 | Error while adding |
| 093 | Error when changing |
| 094 | Error when deleting |
| 095 | Function code & is not supported |
| 096 | Maximum number exceeded (entry will be ignored) |
| 097 | Overlapping records will be deleted |
| 098 | Encompassing record will be split |
| 099 | Subsequent record will be delimited at beginning |
| 100 | &1 &2 moved as of &3 |
| 101 | Are you sure you want to delete records? |
| 102 | Caution: If you press ENTER, records will be deleted |
| 103 | Function cannot be executed for referring objects |
| 104 | Change canceled |
| 105 | & & not found |
| 106 | No lines have been selected |
| 107 | Error while deleting relationships |
| 108 | Deletion was canceled |
| 109 | Enter an organizational unit or create one |
| 110 | Source and target plan versions are identical |
| 111 | Caution: Target plan version is not empty |
| 112 | No objects created |
| 113 | & objects created |
| 114 | Select one only |
| 115 | &1 &2 delimited as of &3 |
| 116 | &1 objects created as of &2 |
| 117 | Function does not exist |
| 118 | Message & & & not found |
| 119 | Relationship &1 &2 is not allowed for object type &3 |
| 120 | Error during data collection |
| 121 | Time constraint not found for & & & |
| 122 | No data exists in selected time period |
| 123 | Object & does not exist in status 1 (activation not possible) |
| 124 | Action was canceled |
| 125 | Hours entered are too high |
| 126 | Percentage entered is too high |
| 127 | Personnel number & has retired/is a pensioner |
| 128 | Personnel number & has left the company |
| 129 | Object type not of the type 'person' |
| 130 | Person ID not valid |
| 131 | No valid time entry for this person |
| 132 | Lock key not defined in RPDSYS00 |
| 133 | Infotype & has no substructure in T777D |
| 134 | No data exists in language & |
| 135 | Data fields have not been filled |
| 136 | Enter a currency |
| 137 | Double entry & |
| 138 | Enter a valid cost item |
| 139 | Enter a valid currency |
| 140 | Enter a scale basis |
| 141 | Enter one scale basis only |
| 142 | Relationship & is unknown |
| 143 | Error during creation |
| 144 | No exchange rate exists for the cost element &1 of business event &2 |
| 145 | Error during currency conversion: business event &1 (cost element &2) |
| 146 | No field with name &2 in infotype structure &1 |
| 147 | Object & & & is delimited |
| 148 | Creation of batch input session not possible |
| 149 | Object &1 &2 is flagged for delimiting on date &3 in status &4 |
| 150 | A record without data cannot be saved |
| 151 | Historical record already created |
| 152 | Error while delimiting |
| 153 | Staff function was changed as of & |
| 154 | Error while changing staff function |
| 155 | For object type &1, infotype &2 is not allowed |
| 156 | Inverse object &1 locked by user &2 |
| 157 | Start date corrected to the minimum date allowed & |
| 158 | End date corrected to the maximum date allowed & |
| 159 | No maintenance authorization in validity interval of record |
| 160 | Enter an infotype (mandatory) |
| 161 | Essential relationship (DB update for 1000 not yet performed) |
| 162 | Infotype flagged for updating |
| 163 | Proposal for planned relationship |
| 164 | Creation of object ID 00000000 is not allowed |
| 165 | Infotype sequence updated in database |
| 166 | Preset time period not applied due to authorization problem |
| 167 | Validity period does not overlap with any authorization period for & & |
| 168 | You require authorization to create the relationship |
| 169 | Infotype &1 not allowed for object type &2 |
| 170 | RFC connection activated and data passed |
| 171 | Evaluation path & is not in Table T778A |
| 172 | CPI-C error & during allocation |
| 173 | CPI-C error & during accept |
| 174 | CPI-C error & during receipt |
| 175 | CPI-C error & during initialization |
| 176 | CPI-C error & during send |
| 177 | No entry in Table TXCOM for user & |
| 178 | Structure & is not in Table T777D |
| 179 | Structure request incomplete |
| 180 | Object type &1 is not in evaluation path &2 |
| 181 | The relationship is not in the evaluation path & |
| 182 | Status vector & is not allowed |
| 183 | Graphics not supported at present |
| 184 | RFC destination has not been maintained in Table T77S0 (& &) |
| 185 | RFC destination & does not exist in table RFCDES |
| 186 | RFC communication error |
| 187 | No qualifications exist for assessment |
| 188 | No booked attendees exist for assessment |
| 189 | Change for person & extends too far into past |
| 190 | Change HR master data |
| 191 | Employee group/subgroup differ for person and position |
| 192 | Position and person must belong to the same controlling area and co.code |
| 193 | Related person &1 has employee group/subgroup &2 / &3 |
| 194 | No access to position & & & |
| 195 | Entry is not allowed (due to & & and & &) |
| 196 | Caution: No direct update of HR master data |
| 197 | Infotype "Org. Assignment" not yet created for personnel number & |
| 198 | Personnel number & is locked |
| 199 | Specify a valid cost center |
| 200 | Table &1 does not physically exist in client &2 |
| 201 | Table & is locked (automatic maintenance is not possible) |
| 202 | &1 &2 created for &3 |
| 203 | Table &1 does not exist in client &2 |
| 204 | & & does not exist |
| 205 | Enter the complete duration in days and hours |
| 206 | Enter a suitable number of hours |
| 207 | Specify a start day |
| 208 | Entry of 'multiple dates' will be changed to 'one date' |
| 209 | Schedule pattern and user-defined schedule not possible simultaneously |
| 210 | Object &1 does not exist in status &2 |
| 211 | Enter a schedule pattern, a user-defined schedule, or days/hours |
| 212 | Enter a time block |
| 213 | User-defined schedule too long for distance selected |
| 214 | Only one object ID may be specified for the root |
| 215 | No authorization for cost center & & & |
| 216 | Enter a schedule pattern or delete the schedule class |
| 217 | For schedule class 1, frequency and factor are not allowed |
| 218 | Specify a recurrence frequency and factor |
| 219 | Enter a schedule class or delete the schedule pattern |
| 220 | Relationship is only allowed if object type & is included |
| 221 | Interval limits changed for automatic scan |
| 222 | Interval limits reached for automatic scan |
| 223 | Object & & does not exist in entire data selection period |
| 224 | The component for infotype & is not active |
| 225 | The dialog module for infotype & is unknown (TDCT) |
| 226 | Infotype & cannot be processed (T777D) |
| 227 | Selection period will be limited to validity of & & |
| 228 | Select one feature only |
| 229 | This assignment conflicts with personnel number & |
| 230 | Caution: All object types will be edited |
| 231 | Caution: All objects of the object type will be edited |
| 232 | Business event &1 &2 created in time period &3 - &4 |
| 233 | Creation of additional data is not possible - bus.event & does not exist |
| 234 | Creation of additional data is not posible - bus.event & is locked |
| 235 | Error while creating infotype capacity |
| 236 | Error while creating business event costs infotype |
| 237 | Error while creating relationship with cost center |
| 238 | Creation of additional data is not possible - organizer is locked |
| 239 | Error while creating relationship with organizer |
| 240 | Error while creating additional data for business event & |
| 241 | Start date corrected for automatic scan (b.event type/location validity) |
| 242 | End date corrected for automatic scan (bus. event type/location validity) |
| 243 | Time interval is not within validity period of business event type |
| 244 | No objects found |
| 245 | Object type &1 does not exist for transaction &2 |
| 246 | Control entry for transaction & does not exist in table T77S0 |
| 247 | Error while accessing specified structure root |
| 248 | Only the organizational assignment was changed in master data |
| 249 | No evaluation path specified for structural evaluation |
| 250 | Infotype will be set at 1000 |
| 251 | Infotype must be specified |
| 252 | You have not specified a plan version |
| 253 | Infotype must be specified |
| 254 | No controlling area found (company code &1, business area &2) |
| 255 | &1 &2 created for &3 in the structure |
| 256 | Changes for person & extend beyond the max. retroactive accounting period |
| 257 | Relationship to & & delimited |
| 258 | Enter an organizational unit or an interval |
| 259 | Check the interval specified |
| 260 | & & cannot be edited |
| 261 | & & is not a PD object |
| 262 | &1 &2 in status &3 does not exist |
| 263 | Object type &1, infotype &2 cannot be defined using basic transactions |
| 264 | Error when deleting object & & & |
| 265 | No authorization to delimit object & & & |
| 266 | Relationship & is not allowed |
| 267 | Relationship is not included in evaluation path |
| 268 | Object & does not exist in the time period selected |
| 269 | Combination of relationship/object type is not allowed |
| 270 | Object is new |
| 271 | Object & & & starts after delimit date => no delimitation |
| 272 | Infotype & will be created again |
| 273 | No authorization to delete object & & & |
| 274 | Maintenance of data in Customizing plan version is not allowed |
| 275 | You have no authorization for this infotype |
| 276 | Enter an infotype name |
| 277 | No authorization |
| 278 | You are not authorized to execute this function |
| 279 | Error when updating relationship; action canceled |
| 280 | This record already exists in status & |
| 281 | Check the organizational assignment of person & |
| 282 | Enter a valid position |
| 283 | Transport request & does not exist |
| 284 | Object type & is not possible as source object type of relationship |
| 285 | No generic entry '*' is allowed for object type |
| 286 | Relevant time constraint for & & & is not defined |
| 287 | Relevant time constraint for & & & is not equal to 3 |
| 288 | CAUTION: Target object type has not been filled |
| 289 | Relevant time constraint for & & & has additional condition |
| 290 | Enter a time constraint |
| 291 | Transport & successfully created |
| 292 | Error when creating transport & |
| 293 | Relationship &1 &2 &3 &4 cannot be maintained using basic transaction |
| 294 | You have no authorization for some objects. |
| 295 | The object chosen has no organizational assignment. |
| 296 | The entry & already exists in table & |
| 297 | Object &1 &2 is locked by user &3 |
| 298 | Relationships with & & still exist. |
| 299 | No valid interval could be found for object & & |
| 300 | Specify a valid subgroup |
| 301 | No authorization for & & & & |
| 302 | Infotype & skipped due to lack of authorization |
| 303 | Relationship & & & does not produce an authorization |
| 304 | Copied successfully. New object ID: & & & & |
| 305 | You can only maintain a substitute for yourself |
| 306 | Error when copying. Authorization data was not copied. |
| 307 | & & applied |
| 308 | Size category for table & is too small. |
| 309 | Error has occurred in tree display |
| 310 | One or more parameters have been adapted according to the specifications |
| 311 | Integration is not active |
| 312 | Infotype & created |
| 313 | Entry already exists in table T77MWBFCH |
| 314 | The total length of infotype fields must not exceed 900 |
| 315 | Structure & must not contain a field with the name &. |
| 316 | Specify an infotype between 9000 and 9999 |
| 317 | According to T777D, a transparent table already exists for infotype &. |
| 318 | A transparent table cannot be created for infotype &: & |
| 319 | An HRI structure with different content already exists. |
| 320 | Total employment % exceeds approved % by & % |
| 321 | &1 relationships of &2 &3 exceed working hours by &4 % |
| 322 | You can only process relationships with & & & & |
| 323 | &1 relationships of &2 &3 exceed 100 % by &4 % |
| 324 | Relationship &1 of object &2 &3 exceeds 100 % |
| 325 | &1 is obsolete as of &2 |
| 326 | No exchange rate exists for the selected currency |
| 327 | Error during currency conversion |
| 328 | Enter a valid time unit |
| 329 | No additional data exists for relationship & & |
| 330 | Enter a valid object type (L, D, or E) |
| 331 | All prices were applied |
| 332 | Error when editing relationships: & & could not be locked |
| 333 | Only costs for firmly booked business events can be transferred |
| 334 | Delimitation date is before start date |
| 335 | Structure & is not in ABAP Dictionary |
| 336 | Select the calculation on the basis of business events |
| 337 | Data has been copied to Cost Accounting |
| 338 | Enter one of the values 'A', 'E', or 'N' |
| 339 | Costs for business event & were already passed to Cost Accounting |
| 340 | Cost center &1 does not exist for controlling area &2 |
| 341 | The infotype must not include an integer type or floating point no.field |
| 342 | Error when creating infotype &. |
| 343 | Infotype number & is not in the customer name range |
| 344 | Check view & |
| 345 | Action & is only allowed for plan version & |
| 346 | Action & is only allowed for object type & |
| 347 | Action & is only allowed for status & |
| 348 | Action & is not included in table T777M |
| 349 | Infotype record table is empty. |
| 350 | Table division of infotype records is empty |
| 351 | Entry &1 &2 &3 is not in Table &4 |
| 352 | The write function module for infotype & is unknown |
| 353 | A primary table has not been defined in T77ID for infotype & |
| 354 | Country/region key & does not exist. |
| 355 | Subtype field can only be maintained together with subtype table |
| 356 | Dialog module program and program are different: & & |
| 357 | No physical file name defined for &1 |
| 358 | Choose a position or job |
| 359 | User & does not exist in this period |
| 360 | Program error: Action & is not allowed |
| 361 | Program error: The number must be 0 for action 'GIVE' |
| 362 | No entry for object & found in table TNRO |
| 363 | No valid interval found (external number assignment) |
| 364 | You cannot specify a year during number assignment |
| 365 | No valid interval found (internal number assignment) |
| 366 | The number indicated is not in any valid external interval |
| 367 | Object &1 '&2' exists from &3 to &4 only |
| 368 | Object &1 cannot be assigned to object &2 in the period &3 - &4 |
| 369 | Number is in the reserved area; define the number range & & |
| 370 | Number range is full; edit the number range & & |
| 371 | Error number assignment additional data pointer (no.range object HRADATA) |
| 372 | Error number assignment table pointer (no.range object HRTABNR) |
| 373 | Pointer (field TABNR) in structure & not found |
| 374 | Delimitation date reset to old end date & |
| 375 | Error when delimiting object & & & |
| 376 | Error when delimiting infotype & |
| 377 | Save was canceled |
| 378 | Check the object list of the order (inconsistency in SOBJ) |
| 379 | Infotype Include for infotype & was generated |
| 380 | Internal read error: infotype & cannot be read using this function module |
| 381 | Suppressed dialog not possible for external infotype & |
| 382 | Standard infotypes cannot be deleted |
| 383 | Translation will only be made in existing interval & - & |
| 384 | Function module & does not exist |
| 385 | The assignment & <-> & is not allowed here. |
| 386 | This activity creates a structure that is not permitted |
| 387 | Error in creating a control & & & |
| 388 | Error in setting control characteristic & & & |
| 389 | Error during move |
| 390 | Application & is not installed locally |
| 391 | Only move objects from the same branch |
| 392 | Only select objects of the same type. |
| 393 | Objects can only be moved within their branch and object type. |
| 394 | Percentage specified for exceeding working time at position is incorrect |
| 395 | Interface for function module does not follow convention |
| 396 | Internal error in program &1 key &2 &3 &4 |
| 397 | Program error: Relationship & between & and & not permitted. |
| 398 | Enter a user name |
| 399 | Enter an Internet mail address |
| 400 | Currency is missing |
| 401 | Currency & is not defined in table TCURC |
| 402 | Calendar & has not been generated |
| 403 | Start date is not beginning of year |
| 404 | End date is not end of year |
| 405 | Start year and end year differ |
| 406 | 1st quarter is not within validity period |
| 407 | 2nd quarter is not within validity period |
| 408 | 3rd quarter is not within validity period |
| 409 | 4th quarter is not within validity period |
| 410 | No demand has been specified |
| 411 | Schedule pattern & is incorrect |
| 412 | Recurrence frequency is missing |
| 413 | Start day has not been specified |
| 414 | Begin day on monthly basis is only allowed for monthly recurrence |
| 415 | Recurrence frequency on monthly basis is missing |
| 416 | Only one start day is allowed on monthly basis |
| 417 | Start day has been defined twice |
| 418 | Schedule pattern is too long for selected recurrence frequency |
| 419 | A recurrence frequency is not allowed for a one-time event |
| 420 | Only entry 1 = attendee or 2 = business event allowed |
| 421 | Only input 1 is allowed for unit "business event" |
| 422 | Either objects of one type or objects by relationship |
| 423 | Specify all three values for related objects |
| 424 | Bus.event has already reserved resources with schedule pattern & |
| 425 | Resource & has been reserved in requested time period |
| 426 | Time interval corrected to & days |
| 427 | &1 is not related with &2 &3 as a specialization |
| 428 | Previously defined demand overlaps with current record |
| 429 | Recurrence factor is missing |
| 430 | A recurrence factor is not allowed for a one-time event |
| 431 | Specify a complete duration (days and hours) |
| 432 | Number of hours is too high for number of days |
| 433 | Enter a schedule pattern or days/hours or press F6 |
| 434 | Schedule pattern and user-defined schedule are not allowed together ->F1 |
| 435 | Press F11 to save your user-defined schedule again -> PF1 |
| 436 | Schedule pattern & must begin with day number 001 |
| 437 | You cannot delete day no. 001 because day no. > 001 still exists |
| 438 | Only values from 001 to 999 are allowed as a day number |
| 439 | Schedule TEMPORARY changed for business event planning |
| 440 | Press F14 to confirm deletion, or cancel by pressing ENTER |
| 441 | Maintained schedule cannot be used for planning -> F1 |
| 442 | Only schedule class 1 allowed when days/hours are entered explicitly ->F1 |
| 443 | Schedule too long for this recurrence frequency => data not saved -> F1 |
| 444 | User-defined schedule is too long for selected recurrence frequency -> F1 |
| 445 | Specified schedule deviates from business event schedule -> F1 |
| 446 | You cannot maintain the schedule at the bus.event => display only -> F1 |
| 447 | Only one date can be specified when specific days/hours are entered |
| 448 | Schedule only maintained TEMPORARILY for business event planning |
| 449 | A valid time interval has not been specified |
| 450 | No entry has been found for & in table T770A |
| 451 | Duration in hours > 999999.99 is not possible |
| 452 | Total duration (in days) must not exceed 999 |
| 453 | Plan version '**' is not allowed |
| 454 | Object type '*' is not allowed |
| 455 | No number required with single dates |
| 456 | No interval required with single dates |
| 457 | Enter the number of dates |
| 458 | Enter the time interval between dates |
| 459 | Enter a valid sales area |
| 460 | Select either the room or the instructor (not both) |
| 461 | Maintenance of schedule not possible |
| 462 | Confirm 'Apply' again |
| 463 | Online maintenance of infotype & not possible |
| 464 | Start time is after end time |
| 465 | Capacity & does not exist |
| 466 | Enter a time interval on & that does not overlap |
| 467 | Online maintenance of relationship & not possible |
| 468 | No basis for calculation of working time preset |
| 469 | No consistent entry in table T77OMSCEN for transaction & |
| 470 | Profile & does not exist |
| 471 | Profile & already entered |
| 472 | &1 occupies position &2 with &3% |
| 473 | The entry for profile & was generated and may not be deleted. |
| 474 | Generated profile for deletion is still in use in composite profile(s) |
| 475 | Objects &1 deleted &2 during undo |
| 476 | &1 object recreated &2 during redo |
| 477 | &1 object(s) recreated &2 during redo |
| 478 | &1 object(s) was (were) deleted during redo &2 |
| 479 | Activate preview mode in the detail screen |
| 480 | Block number & already entered |
| 481 | Enter a business event block as a plenum |
| 482 | Enter at least one business event block |
| 483 | Existing requirement records will be delimited |
| 484 | You are not authorized to use transaction & |
| 485 | Select a search variant first. |
| 486 | You cannot extend the end date of & |
| 487 | An error occurred during deletion/delimitation of & |
| 488 | & not deleted/delimited because subordinate objects still exist |
| 489 | Assignment to subordinate objects (&, for example), not possible. |
| 490 | Root object & created in plan version & |
| 491 | Error creating & |
| 492 | Termination date for & is before the start date |
| 493 | The user settings entered have been deleted. |
| 494 | Object is already in the outermost position |
| 495 | Relationship between "&1" and "&2" is inconsistent |
| 496 | No changes to data, periods undone |
| 497 | Your data has been saved |
| 498 | &2 &4 is locked by &1 |
| 499 | Data has not been saved& & |
| 500 | Choose a new end date after the delimit date |
| 501 | CAUTION - CAUTION - CAUTION |
| 502 | If you press ENTER, the version number will be incremented |
| 503 | &2 &4 is locked by you. |
| 504 | Selected infotype & is external |
| 505 | Error during copying. The action has been interrupted. |
| 506 | Object was copied & times. |
| 507 | Copy interrupted: Related object is locked. |
| 508 | Function not available for selected relationship |
| 509 | Enter an amount greater than 0. |
| 510 | Specify a pay scale group from ... |
| 511 | Specify an amount from ... |
| 512 | Enter the period |
| 513 | Complete your entry |
| 514 | Enter a currency |
| 515 | Currency & is not in Table TCURC |
| 516 | "Amount from" must be less than "Amount to" |
| 517 | Only & is allowed as an object type |
| 518 | Amounts may not be nil if no pay scale has been chosen! |
| 519 | Position was copied & times. |
| 520 | Specify a pay scale level from ... |
| 521 | Specify an amount from ... |
| 522 | 'Amount to' has been corrected to maximum value allowed |
| 523 | No entry in table &1 for &2 on &3 |
| 524 | Specify a pay scale group to ... |
| 525 | Specify at least the first four key values for T510 |
| 526 | Acc. to infotype P1013 and T503, the pay scale indicator is & |
| 527 | Use period & in accordance with info type P1013 and T503 |
| 528 | Plan version & set. This is NOT the active plan version! |
| 529 | Caution: You are not using the active plan version! |
| 530 | Plan version & was set |
| 531 | Enter an abbreviation |
| 532 | Choose a job, position, organizational unit, or user |
| 533 | Restrict the subordination(s) first & |
| 534 | Cancel subordination(s) &. |
| 535 | Define jobs |
| 536 | You are not transporting from the active plan version. |
| 537 | &1 &2 delimited on &3 |
| 538 | Fixed end date of preview period incremented to & |
| 539 | Select person, user, position or job. |
| 540 | Select a date between & and & |
| 541 | The relationship was delimited on &. |
| 542 | The object was delimited on &. |
| 543 | Object deleted. |
| 544 | Relationship deleted |
| 545 | Start dates before & are not permitted |
| 546 | End dates after & are not permitted |
| 547 | Choose a line in the staff assignments. |
| 548 | Choose an object in the staff assignments. |
| 549 | Array type is initial |
| 550 | Report does not exist in table TRDIR |
| 551 | Transaction does not exist in table TSTC |
| 552 | The address number is invalid for this record. |
| 553 | Enter function module or report for object type & |
| 554 | Maximum of 12 entries permitted, the rest will be ignored |
| 555 | Object not occupied (period & - &) |
| 556 | This object has relationship & "&" (period &-&) |
| 557 | & created |
| 558 | & |
| 559 | No subject categories can be displayed |
| 560 | In this view there are no objects superior to the current start object |
| 561 | First of & start objects found will be used |
| 562 | The work schedule group &3 already exists for object &1 &2 |
| 563 | Work schedule group & is already defined as 'normal work time' |
| 564 | The number of copies must be at least 1 |
| 565 | Work time per day is calculated acc. to T77S0 |
| 566 | Work time per week is calculated acc. to T77S0 |
| 567 | Work time per month is calculated acc. to T77S0 |
| 568 | Work time per year is calculated acc. to T77S0 |
| 569 | Enter a language that is supported by the system |
| 570 | Error in option parameter (SAPscript) |
| 571 | The length of table fields must not exceed 800. |
| 572 | Enter an object type for the function module & |
| 573 | The function module & does not exist in the system |
| 574 | The report & does not exist in the system |
| 575 | Specify a daily work time between &1 and &2 hours |
| 576 | Specify a weekly work time between &1 and &2 hours |
| 577 | Specify a monthly working time between & and & hours |
| 578 | Specify an annual working time between & and & hours |
| 579 | The transaction & does not exist in the system |
| 580 | You did not select a valid object |
| 581 | Object type & not defined. |
| 582 | Position without job description |
| 583 | Move subordinate positions |
| 584 | Select a target object for the new relationship & |
| 585 | Choose a period: & |
| 586 | Rename only existing organizational units or positions |
| 587 | Select only organizational units or positions |
| 588 | Select a valid (standard) task in the (position) job time period |
| 589 | First move/delimit/delete all subordinate objects |
| 590 | No data found on infotype & |
| 591 | Internal applicant: Edit using personnel number |
| 592 | Name is too long; abbreviate first names |
| 593 | Create job(s) |
| 594 | Check date. & |
| 595 | Overlapping job assignments will be deleted |
| 596 | Select an organizational unit, position, or holder |
| 597 | Select a task, responsibility, or job |
| 598 | Select an existing job |
| 599 | No data exists; create data |
| 600 | No staff functions exist for object type & |
| 601 | No status has been specified |
| 602 | Lower limit greater than upper limit |
| 603 | Only 'P' or 'H' are allowed as input |
| 604 | No matching qualifications exist |
| 605 | No qualifications exist for the person selected |
| 606 | No qualifications exist for the position |
| 607 | No potentials exist for the person selected |
| 608 | Specify 'interests or preferences' for the person |
| 609 | Specify an initial job for editing |
| 610 | Infotype & can only be delimited using "Delimit Object" |
| 611 | If you press ENTER, infotype & will be delimited |
| 612 | Infotype & has been delimited |
| 613 | CAUTION: If you press ENTER, the earmarking is deleted |
| 614 | CAUTION: Only qualifications are allowed as an object type |
| 615 | CAUTION: Depth & may cause a runtime error |
| 616 | The additional parameters are not activated --> see T77S0 |
| 617 | Infotype is not activated --> see T77S0 |
| 618 | Position is occupied from &1 to &2 |
| 619 | No report has been selected |
| 620 | No status has been specified |
| 621 | &2 &3 is not allowed for aspect &1 |
| 622 | No target object has been selected |
| 623 | No source object has been selected |
| 624 | Relationship &1 with addit. structure &2 cannot be processed |
| 625 | Object type & is not supported |
| 626 | Reference object & & will be ignored |
| 627 | Select a source object type |
| 628 | Proficiency has not been evaluated |
| 629 | Person is not assigned to any job in the career model |
| 630 | Infotype must be numeric with length 4 |
| 631 | Infotype & is not allowed as a reference infotype |
| 632 | No entry for infotype &1 in table &2 |
| 633 | Only one action is possible |
| 634 | No &1 found for &2. |
| 635 | There is no position earmarked for this person |
| 636 | There is no person earmarked for this position |
| 637 | No alternative qualifications exist for this qualification |
| 638 | Enter an object type for the report & |
| 639 | Key date is after the validity date of the positions |
| 640 | Key date is after the validity date of the persons |
| 641 | Select the required jobs |
| 642 | Transfer of & successfully completed |
| 643 | "Or" selection: You must satisfy selection criterion |
| 644 | Only object type qualification, position, job, and work center allowed |
| 645 | Enter only one position, or job, or work center |
| 646 | Enter function module |
| 647 | Enter a program name |
| 648 | Enter object type and program name or function module |
| 649 | Multiple entries exist for object type & |
| 650 | Infotype must be numeric with length 4 |
| 651 | No meaning has been specified |
| 652 | Target infotype must be between 1000 and 1999 or 9000 and 9999 |
| 653 | Infotype & is not allowed as a reference infotype |
| 654 | Entries for infotype &1 are already in table &2 |
| 655 | No entry for infotype &1 in table &2 |
| 656 | Structure & already exists in ABAP Dictionary |
| 657 | Structure & does not exist in ABAP Dictionary |
| 658 | Substructure & already exists in ABAP Dictionary |
| 659 | Dynpro structure & already exists in ABAP Dictionary |
| 660 | Dynpro & & already exists |
| 661 | Dynpro & & does not exist |
| 662 | Module pool & already exists |
| 663 | Module pool & does not yet exist |
| 664 | Table & does not physically exist in this client |
| 665 | & & & already locked by another transaction |
| 666 | & & & already locked by your own transaction |
| 667 | Lock table is full |
| 668 | Invalid key for locking |
| 669 | Object has been changed but not saved |
| 670 | Error while reading & & & |
| 671 | Update of & & & ran with an error |
| 672 | Update of & & & ran with a warning |
| 673 | Update of & & & ran without any errors |
| 674 | Error when adding dynpro & & |
| 675 | Dynpro & & added |
| 676 | Error when generating dynpro & & |
| 677 | Dynpro & & generated |
| 678 | No entry for module pool &1 in table &2 |
| 679 | Error when accessing table & |
| 680 | Function keys for & were successfully created |
| 681 | Table entries created for infotype & |
| 682 | Deletion of & & & ran with error(s) |
| 683 | Deletion of & & & ran with warning(s) |
| 684 | Deletion of & & & ran without errors |
| 685 | Function keys successfully deleted |
| 686 | Entries for &1 deleted in table &2 |
| 687 | No entries exist for &1 in table &2 |
| 688 | Module pool & does not exist |
| 689 | No missing inverse relationships found |
| 690 | & & & would have been updated |
| 691 | & & & would have been deleted |
| 692 | For infotype &1, no &2 &3 exist |
| 693 | Enter qualifications |
| 694 | Enter tasks |
| 695 | If you press ENTER, &1 of infotype &2 will be deleted |
| 696 | If you press ENTER, infotype & will be deleted completely |
| 697 | & & & cannot be extended because of overlapping |
| 698 | Specify potentials |
| 699 | & |
| 700 | Master data function code & not supported |
| 701 | Integration for infotype & is active, but general integration is not |
| 702 | Check integration flag PLOGI QUALI |
| 703 | Key &1 is not identical to standard key &2 |
| 704 | HR master data not installed |
| 705 | Error in deletion of cost planning data |
| 706 | The last category was hidden - all categories will be displayed again |
| 707 | Enhanced integration is not switched on |
| 708 | Enter transaction code |
| 709 | Enter WWW address |
| 710 | Additional data not maintained in table &. |
| 711 | Dynpro 6000 is only permitted for customer enhancements |
| 712 | Enter the PBO and PAI functions. |
| 713 | 6000 is set as the dynpro number |
| 714 | An error has occurred in the internal number assignment |
| 715 | The selected objects cannot be assigned simultaneously |
| 716 | Created relationship is outside the preview period |
| 717 | Structure could not be updated |
| 718 | Table PLOG must no longer be used for infotype & |
| 719 | Caution: system could not perform all data changes |
| 720 | You cannot move an object from object type &1 to object type &2 here |
| 721 | HTML Control display is not possible; continue with editor |
| 722 | You cannot display an empty URL |
| 723 | The URL is invalid and cannot be displayed |
| 724 | F key or function code is not allowed for this object type |
| 725 | External key & has already been assigned elsewhere. |
| 726 | Select an object |
| 727 | Select objects |
| 728 | First select a favorite |
| 729 | The temporary favorite cannot be edited |
| 730 | Structure could not be created |
| 731 | Hierarchical list could not be displayed |
| 732 | Enter a valid plan version |
| 733 | No data was found for the input values |
| 734 | The selected records have been corrected |
| 735 | The search variant cannot be displayed. |
| 736 | The search has not produced any hits |
| 737 | No further hits were found |
| 738 | No structure exists |
| 739 | Internal error: Maximum number of profiles has been exceeded |
| 740 | CAUTION: You are changing a released plan scenario |
| 741 | Plan scenario has already been released |
| 742 | Reference cannot be compared - different currency |
| 743 | Reference cannot be compared - different time unit |
| 744 | No data for controlling area & contained in Cost Planning |
| 745 | The changed values can be passed on to version & & only |
| 746 | First cancel the CO data before deleting the planning group |
| 747 | The program can only be called using WinGUI |
| 748 | Back billing infringement of cost distribution under & & |
| 749 | Infotype 0105 could not be deleted. No authorization. |
| 750 | CAUTION: & & & will be deleted |
| 751 | & & & is protected; enter the password |
| 752 | Length of version period not equal to length of selection period |
| 753 | Currency changed to & (due to reference version) |
| 754 | Time unit changed to & & (due to reference version) |
| 755 | Time unit & is not T546T or T777L |
| 756 | There is no time unit for percentage values |
| 757 | Enter a time unit |
| 758 | CAUTION: Release cannot be undone |
| 759 | CAUTION: Plan scenario will not be saved |
| 760 | Enter the password twice |
| 761 | Passwords do not match; enter them again |
| 762 | Version & & & saved |
| 763 | WARNING: & & & not saved |
| 764 | WARNING: & & & will overwrite the older version |
| 765 | CAUTION: & & will be copied from the reference version |
| 766 | Caution: & & is new; define the wage elements |
| 767 | Wage element period has been changed to selection period |
| 768 | CAUTION: Wage element & will be changed |
| 769 | CAUTION: Start date has been changed to & |
| 770 | CAUTION: End date has been corrected to & |
| 771 | A start date later than & is not possible |
| 772 | An end date earlier than & is not possible |
| 773 | End date & is before start date & |
| 774 | Local currency & has not been maintained in table TCURC |
| 775 | Enter the correct password |
| 776 | CAUTION: Position/job & & will be changed |
| 777 | Matchcode selection & was unsuccessful |
| 778 | Wage elements are missing for part of the time period & & |
| 779 | A selection cannot be made for this line |
| 780 | Conversion factor between time units &1 and &2 is missing in table T777L |
| 781 | Wage element & does not exist |
| 782 | Only wage elements of a position/job can be deleted |
| 783 | Only positions of an organizational unit can be deleted |
| 784 | Wage elements cannot be deleted |
| 785 | Wage element &1 generally has grouping &2 |
| 786 | Use the cursor to select an appropriate table |
| 787 | CAUTION: Only the reference version will be loaded (no DB selection) |
| 788 | CAUTION: Object ID 00000000 is not allowed |
| 789 | NOTE: The value of wage elements can change within the time period |
| 790 | User or distribution list $ unknown |
| 791 | If you press ENTER, programs will be deleted |
| 792 | Owners allowed for private distribution lists only |
| 793 | Table & is currently blocked by user & |
| 794 | Structural authorization profiles have been assigned for user(s) & |
| 795 | Error while assigning structural authorization profiles for user(s) & |
| 796 | CI_Include entry is not in the infotype structure |
| 797 | Infotype structure does not exist |
| 798 | CI_Include does not exist in DDIC |
| 799 | Choose interval or key date for infotype &1 |
| 800 | INCLUDE RHRINI50 is incorrect |
| 801 | Start date after end date |
| 802 | End time must follow start time |
| 803 | & is not allowed as an organizer object type acc. to T77R3 |
| 804 | & is not allowed as an attendee acc. to T77R3 |
| 805 | Only number = 1 is allowed for single attendees |
| 806 | No entry found in T77R3 for & |
| 807 | No attendee type found in T77R3 for & |
| 808 | Only attendee types in accordance with T77R3 are allowed |
| 809 | Only organizer types acc.to T77R3-BETKZ are allowed |
| 810 | No relationship found in T77R4 for & |
| 811 | Attendee is unknown |
| 812 | Location is unknown |
| 813 | Kitchen facility is unknown |
| 814 | Acc. to T77S0, no business event locations are allowed |
| 815 | Parameter OCCP = & not allowed |
| 816 | The display is being refreshed |
| 817 | Room reservation & & & created |
| 818 | Room reservation & & & deleted |
| 819 | Room reservation & & & booked firmly |
| 820 | Room reservation & & & changed |
| 821 | Data is missing for room reservation (PLVAR and OTYPE) |
| 822 | Data is missing for room reservation (OBJID) |
| 823 | Room reservation business event type does not exist |
| 824 | Values in T77S0 are incomplete |
| 825 | Room reservation is longer than 1 day |
| 826 | Room reservation is not in status & |
| 827 | Start or end date initial |
| 828 | Action is missing |
| 829 | No room has been selected |
| 830 | Unknown error |
| 831 | Specify a start and end time |
| 832 | Room reservation & locked |
| 833 | Room & locked |
| 834 | Moderator & locked |
| 835 | Moderator & is already a moderator in requested period |
| 836 | Room & is reserved in requested period |
| 837 | A cost center is required for reservation type &. |
| 838 | Kitchen facility must be specified |
| 839 | No attendee type has been specified |
| 840 | Cost center does not exist |
| 841 | No long text exists |
| 842 | Moderator is unknown |
| 843 | Attendee is unknown |
| 844 | Attendee does not exist in room reservations time period |
| 845 | Individual attendee does not exist. |
| 846 | Single attendee does not exist in room reservations time period |
| 847 | Number of attendees is greater than room capacity |
| 848 | Internal + external > number of attendees |
| 849 | Reservation type does not allow lunch |
| 850 | Reservation type only allows internal attendees |
| 851 | Error while creating room reservation |
| 852 | Error with infotype & & & |
| 853 | Error while firmly booking room reservation |
| 854 | Error while deleting room reservation |
| 855 | Error while changing room reservation |
| 856 | Error while deleting old booking |
| 857 | Error while creating booking type & |
| 858 | Error while creating attendee of type & |
| 859 | Error while creating relationship & & |
| 860 | Rebooking is not possible |
| 861 | When exiting attendee editing; press F11 again |
| 862 | At least one attendee is required => no save performed |
| 863 | Number specified is less than number of single attendees |
| 864 | Number of single attendees exceeds maximum number |
| 865 | Single attendee does not belong to attendee |
| 866 | Name tags printed |
| 867 | Attendee list printed |
| 868 | & is not allowed as reservation type acc. to T77R1 |
| 869 | & is not allowed as language acc. to T002 |
| 870 | Check off one field only |
| 871 | The necessary equipment does not exist in the time period |
| 872 | The equipment does not exist |
| 873 | The equipment does not exist in the time period |
| 874 | Reservation was not created by Room Reservations Planning |
| 875 | Specify an attendee |
| 876 | Specify an organizer |
| 877 | There are no single attendees for the attendee specified |
| 878 | There are no rooms to be supplied |
| 879 | Moderator & is absent in the requested period |
| 880 | Moderator & is booked as an attendee in the requested period |
| 881 | Attendee & is already an organizer in the requested period |
| 882 | Attendee & is absent in the requested period |
| 883 | Attendee & is already an attendee in the requested period |
| 884 | Only 1 or 2 are permitted as status entries |
| 885 | External and internal meals must be entered |
| 886 | Choose a room |
| 887 | Enter a reservation type |
| 888 | Enter the organizer |
| 889 | Enter an attendee and the number of persons |
| 890 | If lunch period is not entered, data on lunches will be deleted |
| 891 | Room reservations data printed |
| 892 | Single attendees of & will be lost |
| 893 | & single attendees exist; the number was increased |
| 894 | No maintenance authorization for room requested |
| 895 | Enter a job |
| 896 | Choose & |
| 897 | & does not exist |
| 898 | Conversion:& |
| 899 | & & & & |