61 - Fehlermeldungen fuer Bedarfsplanung
The following messages are stored in message class 61: Fehlermeldungen fuer Bedarfsplanung.
It is part of development package MD0C in software component PP-MRP-BD. This development package consists of objects that can be grouped under "Customizing R/3 Material Requirements Planning".
It is part of development package MD0C in software component PP-MRP-BD. This development package consists of objects that can be grouped under "Customizing R/3 Material Requirements Planning".
Message Nr ▲ | Message Text |
|---|---|
| 000 | General program error. Please notify SAP development |
| 001 | Argument & not in Table & |
| 002 | Planned order & already exists |
| 003 | Planned order & does not exist |
| 004 | Material & does not exist in plant & |
| 005 | The scrap quantity must be smaller than the order quantity |
| 006 | Please enter completion date and/or start date |
| 007 | The processing of customer data is not allowed here |
| 008 | Material &1 &2 &3 is not planned automatically |
| 009 | Please specify the order deadlines in ascending order |
| 010 | Planned order & will be created |
| 011 | Planned order & changed |
| 012 | Planned order & will be deleted |
| 013 | Sales order data was cancelled |
| 014 | Sales order data does not exist |
| 015 | Dates incorrect (start date > finish date) |
| 016 | You have made no changes |
| 017 | Please check the firming indicator |
| 018 | Invalid procurement type |
| 019 | Special procurement type & is not allowed with procurement type & |
| 020 | No scheduling information exists |
| 021 | A requirement quantity of zero is not allowed |
| 022 | The requirements date lies after the planned finish date on time axis |
| 023 | A calculation of the number of partial lots is not possible |
| 024 | A calculation of the total quantity is not possible |
| 025 | Please enter partial lot quantity or number of partial lots |
| 026 | Please create the components |
| 027 | No material components were determined |
| 028 | Entry of material components is not allowed for this order type |
| 029 | Function code & not allowed |
| 030 | Planned order not defined for external procurement |
| 031 | Material data of component & & not maintained |
| 032 | Please enter release date or scheduled delivery date |
| 033 | Planned order & cannot be converted |
| 034 | Purchase requisition & & already exists |
| 035 | Please enter the delivering plant |
| 036 | The delivering plant is the same as the ordering plant. Please correct |
| 037 | Supplying plant & does not exist |
| 038 | Delivering plant was cancelled |
| 039 | Planned order & converted to purchase requisition & & |
| 040 | MRP controller &2 does not exist in plant &1 |
| 041 | No planned orders exist for selected criterion |
| 042 | Planned order already converted |
| 043 | Please select a planned order |
| 044 | & Planned orders converted into purchase requisitions |
| 045 | No planned orders were selected |
| 046 | Planned orders were converted |
| 047 | Change to a directly produced planned order - please note long text |
| 048 | No search help available. Use collective display for planned orders. |
| 049 | Planned order was converted - no reset is possible |
| 050 | Invalid planning run type |
| 051 | Processing key & invalid for single-item planning |
| 052 | Please check input parameters |
| 053 | To start the planning run, press enter |
| 054 | MRP carried out for & & & |
| 055 | Error in the number assignment (Number range: Module &: &) |
| 056 | Planned order only partially converted |
| 057 | Planned order deleted |
| 058 | Error reading forecast parameters for material & in plant & & |
| 059 | Please carry out forecast for material & in plant & |
| 060 | The date & is not convertible (please correct) |
| 061 | & date lies before start of factory calendar. (Please correct) |
| 062 | & date comes after end of valid factory calendar. (Please correct) |
| 063 | Invalid factory calendar or error in the factory calendar & |
| 064 | & is not a workday and was changed to & |
| 065 | Exception message text maintained |
| 066 | %NEM=&: & & & |
| 067 | & field does not exist |
| 068 | Specify field names |
| 069 | Specify table name |
| 070 | Please enter table names and field names |
| 071 | Object & not contained in Table T440A |
| 072 | Generation carried out |
| 073 | Period split & does not exist |
| 074 | Language & does not exist |
| 075 | Table is new. Place cursor on the message and press F1 |
| 076 | No messages exist |
| 077 | The MRP type & is invalid |
| 078 | The material & has been marked for the MRP run |
| 079 | Invalid input combination |
| 080 | Material &1 &2. Status &3 does not allow long-term planning |
| 081 | No additional information exists |
| 082 | Parameter ID not maintained in PARA table |
| 083 | Please enter the field name as well |
| 084 | Please maintain table & |
| 085 | No elements exist for the selection |
| 086 | The planning run was terminated by the user |
| 087 | The MRP list for material & & & was deleted |
| 088 | No MRP list exists |
| 089 | No more MRP lists were selected |
| 090 | Select end of block |
| 091 | No planned orders were selected |
| 092 | Please specify at least one restriction |
| 093 | Enter an object |
| 094 | No changes were carried out |
| 095 | Enter an object |
| 096 | The object must be at least 4 characters long |
| 097 | Invalid item category |
| 098 | Maximum no. of order proposals per deadline exceeded |
| 099 | -&- materials processed |
| 100 | From-date is later than to-date |
| 101 | Please choose a material |
| 102 | Please select a material |
| 103 | List is being printed |
| 104 | MRP controller & does not exist for plant & |
| 105 | Please maintain a text in the logon language |
| 106 | & material(s) was/were selected |
| 107 | & materials were selected |
| 108 | Material not maintained by accounting department |
| 109 | Please select clearly |
| 110 | Selection is contradictory |
| 111 | Selected function cannot be used for the element |
| 112 | Please select a valid line |
| 113 | The previous workday is the & |
| 114 | No exception message(s) exists for this element |
| 115 | Select the end of the block |
| 116 | The forecast period could not be determined |
| 117 | The selected element cannot be changed |
| 118 | Please maintain version in Table T009 |
| 119 | Maintain periods in Table T009B |
| 120 | Planned order & is blocked by user &2 |
| 121 | Enter either a material or an MRP controller |
| 122 | Planned order has already been deleted or converted |
| 123 | Error determining planning periods for calendar & |
| 124 | In-house production time calculated &1 is too long |
| 125 | Material & & is to be procured externally |
| 126 | Material & & cannot be produced in-house |
| 127 | The material & is defined for in-house production |
| 128 | Material & & cannot be procured externally |
| 129 | Please enter a date in the future |
| 130 | Material &1 &2. Status &3 does not allow the planning run |
| 131 | Please check the selection parameters |
| 132 | Material &1 &2 is blocked for single-item planning by user &3 |
| 133 | Purchase requisition & & is blocked |
| 134 | The planning run for plant & has already been started |
| 135 | Please select an issue or a receipt field with the cursor |
| 136 | No blocking entry exists for plant & |
| 137 | The blocking entry for plant & was deleted |
| 138 | Plant & has not been maintained |
| 139 | Requirements planning is not active in plant & |
| 140 | No planning file entry exists for this selection |
| 141 | Material cannot be processed with this transaction |
| 142 | Finish date of a procurement proposal outside the factory calendar |
| 143 | Account assignment category & invalid |
| 144 | Purchase requisition has not yet been released |
| 145 | An account assignment is not allowed |
| 146 | Quota arrangement has been changed |
| 147 | Explosion data has changed, please re-explode |
| 148 | Scheduling error: & |
| 149 | No requirements type found |
| 150 | Sales order/item does not exist |
| 151 | Document is not a sales order |
| 152 | Sales order was rejected |
| 153 | Sales order has already been delivered |
| 154 | Invalid entry |
| 155 | Sales order does not allow make-to-order production |
| 156 | Incorrect inventory management in the sales order (&1) |
| 157 | Incorrect settlement in the sales order (&1) |
| 158 | Project number was deleted |
| 159 | Print order was created |
| 160 | No list found. Please use alternative selection parameters |
| 161 | Please select only one output type |
| 162 | Please enter a valid period indicator |
| 163 | Please enter a fiscal year variant for period indicator & |
| 164 | Please enter a period split for period indicator & |
| 165 | Please enter a PP planning calendar for period indicator & |
| 166 | Fiscal year variant & does not exist |
| 167 | Period split & does not exist |
| 168 | Fiscal year variant only makes sence for period totals with period & |
| 169 | Planning calendar only makes sence for period totals with period & |
| 170 | Period split only makes sence for period totals with period & |
| 171 | Graphic profile & & & is not correctly maintained |
| 172 | Invalid date |
| 173 | Selection of planned orders was interrupted after & hits |
| 174 | Period indicator only makes sense for period totals display |
| 175 | Conversion of unit of measure &1 to unit of measure &2 not possible |
| 176 | Date lies outwith the period of examination |
| 177 | No deleted components exist |
| 178 | Distribution function & does not exist in plant & |
| 179 | Enter a material |
| 180 | You have not selected any material components |
| 181 | Material component is a planned receipt |
| 182 | The material is only available from & for materials planning |
| 183 | Material requires configured sales order |
| 184 | Sales order is different from planned sales order (& &) |
| 185 | Account assignment type copied from the sales order |
| 186 | Please enter a date that does not lie in the past |
| 187 | Rounding profile does not exist |
| 188 | The purchase requisition has been completely ordered |
| 189 | Reservation has more than 9999 items |
| 190 | The line item & not found in internal Table & |
| 191 | Invalid line in internal Table & |
| 192 | Material & in plant & is available for the requirement date |
| 193 | On the &, only & & available |
| 194 | Material is never available |
| 195 | Entered value not allowed |
| 196 | No planned orders exist for the selection criteria |
| 197 | Error & does not exist |
| 198 | Special procurement & for plant & is not valid |
| 199 | Week is invalid |
| 200 | SQL error: Error in READ (Table: & ) |
| 201 | SQL error: Error in the UPDATE (Table: & ) |
| 202 | SQL error: Error in the DELETE (Table: & ) |
| 203 | SQL error: Error in the SELECT (Table: & ) |
| 204 | SQL error: error during INSERT (table: &) |
| 205 | MRP calculation only until the end of the short-term horizon |
| 206 | No. of periods for the end of the short-term horizon set to 1 |
| 207 | The validity of the short-term horizon ws not limited |
| 208 | Short and long-term lot-size indicator not compatible |
| 209 | Long-term planning is not active in plant & |
| 210 | Planning calendar is blocked. Display only |
| 211 | Sales order &1 &2 is blocked for single-item planning |
| 212 | An order quantity of 0 is not allowed |
| 213 | Material &1 &2 is blocked from planning with scenario &3 |
| 214 | Planning run for scenario &1 is plant &2 has already started |
| 215 | Contract uses storage location & |
| 216 | Stge loc. does not correspond to the stge loc. of the scheduling agmt |
| 217 | No documents exist |
| 218 | Materials to be discont.in parallel and follow-up mat.are deactivated |
| 219 | Inserting is not possible in the discontinue/follow-up procedure |
| 220 | The sum of the usage probabilitites is & |
| 221 | Material's assembly scrap is & |
| 222 | Time interpr.only poss.when using period lot size with planning calendar |
| 223 | Do not maintain time interpretation and scheduling together |
| 224 | Multi-level discontinuation not supported |
| 225 | Conversion between units of measure &1 / &2 for material &3 not possible |
| 226 | Quantity overflow for component & in BOM explosion |
| 227 | Error: non-stock component &1 with in-house production is recursive |
| 228 | Please specify an account assignment type with consumption posting 'U' |
| 229 | Material &1 &2. Status &3 allows no purchase order |
| 230 | Long-term lot size has not yet been completely maintained |
| 231 | Material &1 in plant &2 is blocked for Purchasing |
| 232 | Quantity overflow of material & in net requirements calculation |
| 233 | Error during compression of internal table & |
| 234 | Error during expanding of internal table & |
| 235 | Internal table &1 is not in memory |
| 236 | Transfer end &2 is before transfer start &1. |
| 237 | Planning run executed: &1 materials, &2 with exceptions |
| 238 | Order is not part of the BOM you are currently processing |
| 239 | Purchase requisition can only be deleted by deleting the order. |
| 240 | Order quantity &1 &3 increased by &2 &3 scrap |
| 241 | The scrap quantity was adjusted proportionally |
| 242 | The order quantity may not be less than the GR quantity. |
| 243 | Partially confirmed planned order &1 cannot be deleted |
| 244 | Account assignment data is incomplete |
| 245 | Invalid date &1 for element &2 &3 &4 |
| 246 | Material is locked for purchasing |
| 247 | No vendor (creditor) found for MRP element |
| 248 | No customer (debitor) found for MRP element |
| 249 | Material & does not exist in plant &, MRP area & |
| 250 | Error calculating the period of adjustment for demand management |
| 251 | Purchase requisition &1 has not delivery date |
| 252 | Deletion of & is only allowed in single-level BOM/structure representn |
| 253 | You change only change & in single-level BOM/structure representation |
| 254 | Storage location '&' for material '&' in MRP area '&' planned separately |
| 255 | Error reading the BOM & & |
| 256 | Invalid unit of measure for components & & |
| 257 | Up to &, only & can be confirmed. Requested & |
| 258 | Configured BOM could not be exploded |
| 259 | Material requires configuration |
| 260 | Project and/or WBS element not complete |
| 261 | Project does not allow individual project production |
| 262 | Project and/or WBS element does not exist |
| 263 | Missing configuration in planned order &1 |
| 264 | Missing configuration in sales requirement &1 |
| 265 | You can maintain the components by exploding the BOM |
| 266 | Total requirement & does not exist |
| 267 | Project &1 is not an account assignment element |
| 268 | Please check the selection parameters |
| 269 | Column with rescheduling date shown |
| 270 | ***** COMMENT: Messages for missing table entries |
| 271 | MRP controller '&1' for material '&2' does not exist |
| 272 | Plant '&1' does not exist |
| 273 | MRP parameters for plant '&1' have not been maintained |
| 274 | No entry exists for plant &, material type & in V134M |
| 275 | Material & does not exist |
| 276 | Material status &1 does not exist for material &2 |
| 277 | Release indicator &1 not allowed for purchase requisition &2 |
| 278 | MRP type &1 not allowed for material &2 |
| 279 | Lot-sizing procedure &1 not allowed for material &2 |
| 280 | Range of coverage profile &1 does not exist |
| 281 | No entries in Table &1 found |
| 282 | &1 / &2 / &3 is an invalid combination or action code not allowed |
| 283 | Unknown action code &1 |
| 284 | No entry for &1, &2, &3 in the list profiles |
| 285 | No action code(s) copied |
| 286 | No print data exists |
| 287 | Splitting indicator &1 does not exist |
| 288 | Exception message &1 or exception message text does not exist |
| 289 | Special procurement key &1 not defined in plant &2 |
| 290 | Text for MRP element &1 not maintained in language &2 |
| 291 | Action &2 executed for planned order &1 |
| 292 | Please enter action code |
| 293 | Storage location &2 in plant &1 does not exist |
| 294 | No entry exists for plant &1 in plant Table |
| 295 | No entry exists for unit &1 in Table of units |
| 296 | "Firm" and "Delete firm ind." set at the same time |
| 297 | Combination "detete" and "print" not allowed |
| 298 | Action &1 cannot be executed together with another action |
| 299 | Action &1 requires the update within the module |
| 300 | Components were deleted |
| 301 | No components were deleted |
| 302 | Storage location & does not exist |
| 303 | & batch does not exist |
| 304 | Storage location &1 not maintained for material &2 in plant &3 |
| 305 | The withdrawn quantity (partially) exceeds the requirement quantity |
| 306 | No customer requirements exist for materials selected |
| 307 | Unit of measure conversion for material &1 of &2 terminated in &3 |
| 308 | Scope of planning '&1' does not exist. |
| 309 | Planning run for scope of planning is only possible in parallel mode |
| 310 | The order was already checked according to ATP logic |
| 311 | No planned independent requirements maintained for material |
| 312 | Plant / MRP area does not exist in scope of planning |
| 313 | Capacity has already been planned for the order |
| 314 | Planning run with scope of planning. Delete scope of plng for plant plng |
| 315 | Planning file (DBVM) is empty |
| 316 | Selected scope of planning &1 is empty |
| 317 | Selected scope of planning &1 is empty. Please fill or delete |
| 318 | Component &1 cannot be deleted |
| 319 | Two quantity columns inserted in unit of measure & |
| 320 | Plg calendar n.maintained far enough into future or per.of entry too smll |
| 321 | Period profile &1 is not allowed to be used for plant &2 |
| 322 | Planned order &1 may not be changed |
| 323 | Schedule records are being deleted |
| 324 | Columns with vendor data shown |
| 325 | Columns with customer data inserted |
| 326 | Pegged order & does not exist |
| 327 | Navigation profile & does not exist |
| 328 | Please maintain the account assignment data |
| 329 | Date &1 for element &2 &3 &4 is not within the factory calendar |
| 330 | Manual firming date &1 set |
| 331 | Manual firming date &1 deleted |
| 332 | Action &1 is not possible for simulative planned orders |
| 333 | Quantity overflow when saving schedule lines for material & |
| 334 | Quantity overflow when importing MRP elements for material & |
| 335 | BOM is not valid: &1, &2, &3, &4 |
| 336 | Several main parts in discontinuation group &1 |
| 337 | Sales order planning/project planning not possible for material &1 &2 |
| 338 | Single item planning in simultation mode not possible for material &1 &2 |
| 339 | Time stamp problem: Changes to planned order '&1' terminated |
| 340 | ******* COMMENT: 340- BOM explosion number checks |
| 341 | BOM explosion number & is not active |
| 342 | BOM explosion number & is only valid in plant & |
| 343 | BOM explosion number & is only valid for material & in plant & |
| 347 | ****COMMENT: 348-379 Messages for BOM explosion number maintenance |
| 348 | You do not have the nec.authorization for maintaining BOM explosion nos. |
| 349 | You do not have the necessary authorization for displaying BOM expl.nos. |
| 350 | Please select at least one BOM explosion number |
| 351 | No BOM explosion numbers exist in the selected area |
| 352 | BOM explosion number & is blocked by another user |
| 353 | Error blocking BOM explosion number & |
| 354 | Error unblocking BOM explosion number & |
| 355 | Error deleting BOM explosion number & |
| 356 | BOM explosion number & has been deleted by another user |
| 357 | BOM explosion number & has been changed by another user |
| 358 | Error reading BOM explosion number & |
| 359 | Error saving BOM explosion number & |
| 360 | BOM explosion number & already exists |
| 361 | Please enter a BOM explosion number |
| 362 | & BOM explosion number(s) was(were) saved |
| 363 | Please enter a fixed key date |
| 364 | Fixed key date in the past |
| 365 | No BOM explosion numbers were changed |
| 366 | Error deleting BOM explosion number & |
| 367 | BOM explosion number & has been flagged for deletion |
| 368 | & BOM explosion numbers were retrieved |
| 369 | BOM explosion number & cannot be recovered |
| 370 | & BOM explosion number(s) was(were) recovered |
| 371 | Please select only one item |
| 372 | Error saving new key assignment & -> & |
| 373 | & new key assignment(s) was(were) saved |
| 374 | Error unblocking new key assignment & -> & |
| 375 | BOM explosion number & is not active |
| 376 | New key assignment is blocked by another user |
| 377 | Error blocking new key assignment |
| 378 | & new key assignment(s) was(were) deleted |
| 379 | New key assignment for BOM explosion number & blocked. Display only |
| 380 | ****** COMMENT: 380-382 messages for order profile - F4 |
| 381 | Please maintain Table T460B |
| 382 | Please maintain the order profile |
| 383 | BOM selection not maintained |
| 390 | ****COMMENT: further messages for BOM explosion number maintenance |
| 391 | Select a line |
| 392 | A new key assignment exists for this entry already |
| 400 | No authorization for & in plant & and MRP controller & |
| 401 | No authorization for & in plant & |
| 402 | No authorization for & |
| 403 | Material & in plant & has been marked for deletion |
| 404 | The MRP element no longer exists |
| 405 | No authorization for & and planning scenario & in plant & |
| 406 | No authorization for &1 and planning scenario &2 |
| 410 | Incomplete transfer of parameters in index maintenance RSDB |
| 411 | RSDB record already exists |
| 412 | No RSDB record exists |
| 413 | Field exceeded in RSDB index counter table |
| 415 | Run schedule header cannot be calculated |
| 416 | Error during creation of a run schedule header |
| 417 | ****** COMMENT: 417-433 Allocate projects |
| 418 | & allocation(s) was/were saved |
| 419 | & allocation(s) was/were deleted |
| 420 | An allocation already exists for this entry |
| 421 | Error saving the new allocation for plant & and material & |
| 422 | Error unblocking the sales order item & & |
| 423 | Error reading the WBS element & |
| 424 | Sales order item & & is blocked |
| 425 | Error blocking the sales order item & & |
| 426 | No entries have been selected |
| 427 | Please enter a WBS element |
| 428 | No posting to projects is allowed for item & & |
| 429 | Material & allows no make-to-order stock |
| 430 | Item & & allows no make-to-order stock |
| 431 | No items exist for the sales order & |
| 432 | Specify an item |
| 433 | Please enter a sales order first |
| 434 | Daily split carried out |
| 435 | Production line does not exist |
| 436 | Please place the cursor on a line with run schedule data |
| 437 | No planned order was selected for assignment |
| 438 | Invalid cursor position for executing selected function |
| 439 | Selected material does not appear in any product group |
| 440 | Error changing the cost collector |
| 441 | Error creating cost collector |
| 442 | Order type not in Table & |
| 443 | Error creating cost collector |
| 444 | Run schedule & with cost collector & will be created |
| 445 | Data may not be up-to-date -> renew |
| 446 | Reducing the quantity during assignment is not permitted |
| 447 | Distribution function & is incorrect in plant & |
| 448 | Planning ID & was not entered |
| 449 | Enter MRP controller |
| 450 | Enter either the material or the run schedule number |
| 451 | Dummy message & for & in plant & and MRP controller & |
| 452 | Not possible to branch into details |
| 453 | Enter plant |
| 454 | Run schedule header & will be created |
| 455 | Run schedule header & does not exist |
| 456 | Run schedule header & exists already |
| 457 | Run schedule header & will be changed |
| 458 | Run schedule header & will be deleted |
| 459 | Please select planning object |
| 460 | Entered line or column greater than maximum value |
| 461 | No run schedule header exists for material & & |
| 462 | No run schedule header exists for material & & version & |
| 463 | Select field |
| 464 | In period & the total quantity is short of & |
| 465 | In period & the total quantity is exceeded by & |
| 466 | Repetitive mfg not allowed for material & & |
| 467 | Version for material either does not exist or is blocked |
| 468 | Validity period end is smaller than validity period start |
| 469 | Validity period end lies after version validity date & |
| 470 | Validity period start lies brfore version validity date & |
| 471 | Enter version |
| 472 | RS header & already exists in the schedule run time |
| 473 | No run schedule header exists for this selection |
| 474 | Not possible to convert to production order |
| 475 | Incorrect run schedule header & in planned/production order & |
| 476 | Entry & & & missing in T437Z |
| 477 | No version entered, sel. ind will be deleted |
| 478 | No valid run schedule header exists in this time |
| 479 | No assignment possible |
| 480 | & planned orders cannot be specifically assigned |
| 481 | Please enter plnning calendar for freely definable plnng period selection |
| 482 | Please select planning period |
| 483 | Entry & missing in Table & |
| 484 | Assignment not possible. No active version exists for the planning date |
| 485 | No element in column & can be confirmed |
| 486 | No planned data exists for material &, plant & |
| 487 | No planning calendar can be selected |
| 488 | Please select only one period split |
| 489 | Please select at least one output object |
| 490 | No valid calendar ID was entered |
| 491 | No element in column & can be assigned |
| 492 | Final delivery has already been made for partial order & |
| 493 | No released production order was selected |
| 494 | No open reservations exist for production order & |
| 495 | Production order & has already been finally confirmed |
| 496 | Conversion factor to unit of measure & for material & not maintained |
| 497 | Run schedule header & is blocked |
| 498 | Run sched. hdr &1 cannot be deleted because run sched. qty still exists |
| 499 | Entered version does not appear in the planning table |
| 500 | Object & does not exist |
| 501 | Number range & for object & does not exist |
| 502 | Entered version already exists |
| 503 | Enter a version |
| 504 | Enter a run schedule header with partial orders |
| 505 | No capactiy planning active |
| 506 | Assignments were saved |
| 507 | Changes were made to master plan |
| 508 | Delete not possible: RH header's cost collector has no deletion indicator |
| 509 | Please enter a material |
| 510 | Invalid object type |
| 511 | Number range & for object & not planned for internal allocation |
| 512 | Number range not planned for external allocation |
| 513 | Number range &1 for object &2 nearly exhausted |
| 514 | Number range & for object &2 exhausted |
| 515 | Number & does not lie within the defined interval |
| 516 | No documentation exists |
| 517 | Please maintain repetitive mfg profile in the material master record |
| 518 | Entered product group does not exist |
| 519 | No costing data exists |
| 520 | Deletion ind. cannot be set; validity per. of RS header extends in future |
| 521 | Deletion indicator will be set; it cannot be reset |
| 522 | Please check your entries |
| 523 | Please enter valid hierarchy |
| 524 | & RS created, & RS changed, & create version, & change version terminated |
| 525 | RS header for material &, version & not created. Reason: |
| 526 | Not possible to go to line set as you did not access via line set |
| 527 | No pegged requirements exist |
| 528 | Please enter either RS header or material, version and selection date |
| 529 | Runtime of RS header cannot be shortened as much |
| 530 | Procurement type/special procurement type only available as from 2.0 |
| 531 | Please enter either the production or the stock transfer plant |
| 532 | The production/stock transfer plant corresponds to the ordering plant |
| 533 | Special procurement type & not defined |
| 534 | Lot-size indicator for lot-sizing procedure & invalid |
| 535 | Invalid entry |
| 536 | Plant entry unnecessary for procurement type "&", special proc. "&" |
| 537 | Please enter the period length (number of days) |
| 538 | Period length was cancelled |
| 539 | Please complete table entry |
| 540 | Please maintain the range of coverage period |
| 541 | Backflush not possible as not a milestone operation |
| 542 | No capacity data can be displayed |
| 543 | The dates are displayed in ascending order |
| 544 | Production line not available in the planning table |
| 545 | Production line and version are not compatible |
| 546 | Requirements quantity cannot be split |
| 547 | Please maintain the distribution function |
| 548 | The latest reqmts date must lie between the reqmts date and the plnnd end |
| 549 | Distribution does not exist |
| 550 | Dependent components will be deleted |
| 551 | Unit of measure & in & cannot be converted |
| 552 | No long text exists for component & |
| 553 | No text exists for item & |
| 554 | Please check the material components |
| 555 | BOM alternative & is not allowed for application & |
| 556 | Planning calendar & does not exist |
| 557 | Please remove error first |
| 558 | Attention recursiveness. Material & is the same as the order material |
| 559 | Planning calendar & exists already |
| 560 | Planning calendar & does not exist. You can create it if you want |
| 561 | Planning calendar & will be saved |
| 562 | Please select a phantom assembly |
| 563 | Withdrawal quantity greater than the requirements quantity |
| 564 | Availability check only possible for item kept in stock |
| 565 | Selection parameters were saved |
| 566 | Selection parameters were deleted |
| 567 | Version & does not exist for material & in plant & |
| 568 | Version & invalid for material & in plant & |
| 569 | No run schedule could be determined for version & |
| 570 | Select a procurement proposal |
| 571 | BOM explosion number & does not exist |
| 572 | BOM explosion number & is not allowed for material & in plant & |
| 573 | Procurement proposal was copied |
| 574 | The procurement proposal was not changed |
| 575 | Components repeat is switched on |
| 576 | Components repeat is switched off |
| 577 | Direct procurement has not yet been initiated |
| 578 | No purchase orders exist as yet |
| 579 | %N& |
| 580 | The planned order has not yet been scheduled. Please reschedule |
| 581 | No scheduling log exists |
| 582 | Outline agreement & & does not exist |
| 583 | Outline agreement & & is not allowed |
| 584 | Outline agreement & & was deleted |
| 585 | Please enter order/purchase requisition key |
| 586 | Please select a variable-sized item |
| 587 | The unit of entry is set equal to the unit of issue |
| 588 | Check the settings for checking group & and checking rule & |
| 589 | Planned orders selected were firmed |
| 590 | No number range has been entered for sim. dep.reqmts for plant & |
| 591 | Partial order cannot be released |
| 592 | Lot size area for version: from & to & |
| 593 | No scheduling allowed |
| 594 | Capacitites checked. No overload found. |
| 595 | Assembly orders, changes are transferred to sales order |
| 596 | Availability check without storage location was activated |
| 597 | Avail.check w/o storage locations can lead to inconsistencies |
| 598 | The selected planned orders were changed |
| 599 | The selected planned orders will be "unfirmed" |
| 600 | *** COMMENT: Messages for SAPMM61C / Transaction OPPQ |
| 601 | Plant & does not exist |
| 602 | No plant parameters are maintained for plant & |
| 603 | Plant parameters for plant & were deleted |
| 604 | Parameters from plant & were copied to plant & |
| 605 | Plant parameters for plant & can now be maintained |
| 606 | Error reading the parameters for plant & |
| 607 | Error during modification of Table & |
| 608 | Error blocking table & |
| 609 | Plant parameters are blocked by another user |
| 610 | Parameters already exist for plant & |
| 611 | Create parameters for plant & first |
| 612 | You do not have required authorization to maintain parameters in Tab. & |
| 613 | Parameters for plant & were partially copied to plant & |
| 614 | Parameters for plant & were partially delete |
| 615 | Specify a plant |
| 616 | Parameters for plant & were entered in correction & |
| 617 | Entry is not allowed |
| 618 | Calculation rule not maintained correctly |
| 619 | Please specity valid vendor |
| 620 | *** COMMENT: Messages for SAPMM61C / Transaction OPPR |
| 621 | MRP group & & does not exist |
| 622 | MRP group & & was deleted |
| 623 | MRP group & & was copied to & & |
| 624 | MRP group & & can now be maintained |
| 625 | Error reading MRP group & & |
| 626 | Error modifying MRP group & & |
| 627 | Error blocking MRP group (Table T438M) |
| 628 | MRP groups are blocked by another user |
| 629 | MRP group & & already exists |
| 630 | Please create an MRP group first |
| 631 | You do not have the necessary authorization to maintain MRP groups |
| 632 | MRP group & & was entered in correction & |
| 633 | Please enter an MRP group |
| 634 | MRP group text was not changed |
| 635 | MRP group text was saved |
| 636 | Creation of outline agreement requisitions in MRP not allowed |
| 637 | List for the detailed search does not exist |
| 638 | No elements exist for search |
| 639 | No further elements were selected for search |
| 640 | The order type does not exist |
| 641 | The ord.type refers to internal or external no.ranges. Check ord.no.entry |
| 642 | There are still quantities on the line for order &1 |
| 643 | The variance key does not exist |
| 644 | The controlling area does not exist |
| 645 | The cost element does not exist |
| 646 | The order type has not been allocated a number range |
| 647 | Error in number management (please notify the responsible person) |
| 648 | Production version &1 for material &2 in plant &3 is locked |
| 649 | Overhead key could not be determined (check costin variant) |
| 650 | No data exists |
| 651 | Only enter proportion unit |
| 652 | Only enter product unit |
| 653 | No receiver defined in Customizing for MRP controller |
| 654 | Splitting quota not allowed |
| 655 | Processing indicator was set |
| 656 | Processing indicator reset |
| 657 | Error in reading consumption values |
| 658 | & is not a proportion unit |
| 659 | & is not a product unit |
| 660 | No order type can be determined automatically |
| 661 | Purchase requisition no longer exists |
| 662 | Enter a unit of measure |
| 663 | Enter plant or MRP area |
| 664 | Enter a plant |
| 665 | Enter an MRP area |
| 666 | At the most, today's date allowed. The & lies in the future. |
| 667 | Enter today's or a future date |
| 668 | Settings for user & saved |
| 669 | The settings for user & have been reset to the default settings |
| 670 | No exception messages are contained in the list |
| 671 | The MRP list was already processed on the & |
| 672 | When searching using exceptions, select at least one exception |
| 673 | When searching using MRP element, select at least one MRP element |
| 674 | Please select at least one material |
| 675 | No message exists for material & in plant & |
| 676 | Document type not created |
| 677 | Please enter an MRP controller |
| 678 | Enter MRP controller, product group, line or planning ID |
| 680 | & & is a product group |
| 681 | & & is not a product group |
| 682 | Enter product group |
| 683 | Selection by material: enter a material |
| 684 | Conversion of planning file entries: test (T), processing (X) |
| 685 | Conversion of planning file entries has already been carried out |
| 686 | Planning file entries for MRP areas are not converted |
| 687 | Control parameters for MRP areas do not exist |
| 688 | MRP areas are active. It is not possible to delete planning file entries |
| 689 | MRP areas are not defined for SAP Retail systems |
| 690 | Class & does not exist for class type & |
| 691 | Class type & not allowed |
| 692 | Please enter class and class type |
| 693 | Please enter valid production line |
| 694 | If necessary, limit the selection further |
| 695 | Please enter the selection criteria |
| 696 | No authorization for activation of MRP areas |
| 697 | Transaction &1 has been replaced by &2. See note &3. |
| 698 | Report &1 has been replaced by &2. See note &3. |
| 700 | ***** COMMENT: Pegged orders PlOrd: No direct calls -> LTP |
| 701 | There is no pegged requirement for planned order &1 |
| 702 | Pegged requirement for planned order &1 does not contain an order number |
| 703 | Pegged requirement for planned order &1 does not contain an order number |
| 704 | Pegged planned order for requirements &1 / &2 does not exist |
| 707 | Cannot edit or delete object - TBLP entries exist (relevant to A&D GPD) |
| 710 | Planned order &1 cannot be deleted. Goods receipt quantity greater than 0 |
| 711 | Order tree for the first procurement element &1 &2 is displayed |
| 712 | Order report will be displayed |
| 713 | The order report will be displayed with a maximum of &1 hierarchies |
| 720 | ***** COMMENT: distribution function: messages |
| 721 | Distribution key - initial |
| 722 | Distribution key not maintained in Table & |
| 729 | Issuing storage location only possible for stock transfer |
| 730 | ***** COMMENT: Tree Control: Message |
| 731 | Error in function module &1 |
| 732 | Grouping without priority is not allowed for &1 |
| 733 | Grouping for &1 reset |
| 734 | The requested hierarchy levels are already being displayed |
| 735 | No additional hierarchy levels can be displayed for the element |
| 736 | Threshold values not maintained correctly |
| 737 | 'Multilevel Delay' indicator not set in profile &1 |
| 738 | Multilevel delay will be calculated for all sales orders in system |
| 739 | Sales order item &1 &2 is not MRP-relevant |
| 740 | Firmed components of the planned order are copied |
| 741 | Multilevel delay calculated for &1 sales orders |
| 742 | &1 entries deleted from database table &2 |
| 750 | * Comment; messages for availability check |
| 751 | The committment is only possible for the amount of the ATP qty & |
| 752 | Changes were copied |
| 753 | No changes were made |
| 754 | The total committed quantity is greater than the order quantity |
| 755 | Please select a line that can be changed |
| 756 | Data on updating backorders was saved |
| 757 | Please check the controlling of updating backorders |
| 758 | You have no authorization for updating backorders in plant & |
| 759 | You have no authorization for making changes in plant & |
| 760 | Material & is already being processed in plant & |
| 761 | Reqmts switched from collective to individual reqmts |
| 762 | Reqmts switched from individual to collective reqmts |
| 763 | No coverage by the master plan for this date |
| 764 | Order date lies after the confirmation date |
| 765 | Receipts in the past were included |
| 766 | Receipts in the past were not included |
| 767 | There are no components for the availability check in order & |
| 768 | The system could not determine a storage location |
| 769 | Order & was not deleted. Confirm with ENTER first |
| 770 | Inconsistencies when creating/modifying the procurement elements |
| 771 | Receipt quantity greater than requirement quantity |
| 772 | Configuration change not copied to all production orders |
| 773 | Document with credit limit block! |
| 774 | Document with reqmt-specific delivery block! No changes possible |
| 775 | Document with reqmt-specific credit limit block! No changes possible |
| 776 | Order &1:Configuration change not completely executed |
| 780 | *** Messages for printing the component list (SAPLM61L) |
| 781 | Error determining the material components |
| 790 | Internal configuration error |
| 791 | Only &2 decimal places are defined for unit of measure &1 |
| 792 | Object dependency too complicated. BOM: &1-Valid from: &2-Item: &3 |
| 800 | **** COMMENT: Messages from check modules in customizing |
| 801 | Please enter a period split |
| 802 | Please enter a planning calendar |
| 803 | Target range of coverage is smaller than the minimum range of coverage |
| 804 | Target range of coverage is greater than the maximum range of coverage |
| 805 | Order type & is not provided for the order group & |
| 806 | Entry & & does not exist |
| 807 | Make entries in all required entry fields ('*' allowed) |
| 808 | Selection ID & does not exist |
| 809 | For production rate planning, a simplified routing should be used |
| 810 | The indicator "Create capacity requirements" was set |
| 811 | Do not set the rounding value smaller than the threshold value |
| 812 | Please set threshhold value increasing monotonically |
| 813 | Please set the rounding value increasing monotonically |
| 814 | Please enter an item number |
| 815 | Destination &1 not active |
| 816 | Maintain selection ID in the scheduling parameters |
| 817 | Enter at least the target or the maximum range of coverage |
| 818 | Enter withdrawal plant |
| 819 | Withdrawal plant and production plant must be different |
| 820 | Plant input only necessary for withdrawal from alternative plant |
| 821 | Direct production is only possible with in in-house production |
| 822 | Combination not possible |
| 823 | Plants &1 and &2 are assigned to different company codes |
| 824 | Plants &1 and &2 are assigned to different controlling areas |
| 827 | This item has already been entered |
| 828 | Counter number is zero or incorrect sequence |
| 829 | Entry or a plant which belongs to an MRP area already exists |
| 830 | Navigation from 'New Entries' not possible; go back to 'Change View' |
| 832 | No total reqs exist for material &1, plant &2, production version &3 |
| 833 | Select at least one material for the comparison |
| 834 | No additional individual requirements exist for total requirement &1 |
| 835 | No total requirements exist for material &1, plant &2 |
| 836 | "To-date" must not precede the "From-date" |
| 837 | Overlapping of periods is not permitted: Periods from &1 to &2 |
| 838 | Date-from and date-to must be entered |
| 839 | No firming type for reorder point or time-phased material planning |
| 840 | There is no icon called &1 |
| 841 | For demand-driven planning only firming type 1 possible. |
| 842 | Error occurred in method &1 |
| 843 | Special procurement type &1 not allowed in multilevel subcontracting |
| 844 | Invalid gap between &3 and &4 in plant &1 calendar &2 |
| 845 | Planning Periods contain errors. Please maintain correctly. |
| 846 | Cannot save; no planning periods for plant &1 planning calendar &2 |
| 847 | Period &3 to &4 overlap with previous interval in plant &1 calendar &2 |
| 848 | Without Calculation Rule no navigating to Calc. Data and no Calculation. |
| 849 | Calculation Data empty. No calculation. |
| 850 | COMMENT*****: Messages for comparison of the MRP lists |
| 851 | No MRP lists exist |
| 852 | Calculation Data must be cleared before changing Calculation Rule. |
| 853 | *** Comment; Messages for repetitive planning table III |
| 854 | 'Adjust scheduling' level incorrect: &1 / &2 / &3 |
| 860 | Data is incomplete; check your entries |
| 861 | Lead-time scheduling not possible for external procurement |
| 862 | Lead-time scheduling not possible for preliminary planning |
| 863 | Lead-time scheduling not possible for Long Term Planning |
| 865 | Deletion of scheduling margin key &1 plant &2 is not possible |
| 866 | Scheduling margin key &1 plant &2 is used in &3 master data |
| 867 | Scheduling margin key &1 plant &2 is created by SAP |
| 870 | Table RESB contains no fields with 'NOT ZERO' but without default |
| 871 | Field definitions for table RESB were changed |
| 872 | Table RESB is inconsistent |
| 873 | DB definition and SAP DDIC definition are not the same |
| 874 | No NAMETAB exists for table RESB in the SAP DDIC |
| 880 | ****COMMENT: Messages for calendar - F4 (SAPLDATD, FuBau F4 DATE) |
| 881 | No capacity requirements exist |
| 882 | The month &/& lies outwith the factor calendar |
| 883 | Error reading the factira calendar |
| 884 | Date lies outwith the factory calendar |
| 885 | The format of the date in invalid |
| 886 | Factory calendar & was not found |
| 887 | Date & lies in the past |
| 888 | General error. Please inform SAP |
| 890 | ****COMMENT: Messages for BAPI and CIF (planned order) |
| 891 | Planned order & version & does not exist |
| 892 | Planned order & version & is not valid on finish date & |
| 895 | No errors were found |
| 896 | Error occurred in method &1 |
| 898 | System locking error |
| 899 | %N& & |
| 900 | ****COMMENT: Messages for Business Object BUS2004 (planned order) |
| 901 | Reading planned order &1 |
| 903 | Internal error when accessing CY01_PLANNED_ORDERS_INTERFACE |
| 910 | |
| 911 | |
| 912 | |
| 950 | No errors were found |