AO - Investitionsanforderungen Stammdaten / Customizing
The following messages are stored in message class AO: Investitionsanforderungen Stammdaten / Customizing.
It is part of development package AIR in software component IM-FA-IA. This development package consists of objects that can be grouped under "IM appropr.reqs.(master data, planning, preinvestment anal.)".
It is part of development package AIR in software component IM-FA-IA. This development package consists of objects that can be grouped under "IM appropr.reqs.(master data, planning, preinvestment anal.)".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Messages for Appropriation Requests |
| 001 | Transaction &1 is not in table 020 - contact your system specialist |
| 002 | System setting for appropriation request is missing - please correct |
| 003 | Appropriation request type &1 does not exist - please correct |
| 004 | Number range &1 does not exist for app. request type &2 - correct |
| 005 | Number assignnt not internal for app. request type &2 -change Customizing |
| 006 | Enter an appropriation request number between &2 and &3 |
| 007 | Approp. request &1 already exists - enter a different number |
| 008 | Approp. requests are maintained in language &1 |
| 009 | Appropriation request &1 was created |
| 010 | Appropriation request &1 was changed |
| 011 | Appropriation request &1 deleted |
| 012 | Appropriation request &1 does not exist - correct your entry |
| 013 | Requesting company code &2 is copied from cost center |
| 014 | No company code is assigned to controlling area &1 |
| 015 | Controlling area &1 is not assigned clearly to a company code ... |
| 016 | Company code currency &1 was adopted |
| 017 | Controlling area currency &1 was adopted |
| 018 | Co. code currency &1 was adopted, since differnt CO area currency allowed |
| 019 | Distribution percentage rate &1 is larger than 100 - please correct |
| 020 | Distribution percentage rate &1 is not allowed - please correct |
| 021 | You have distributed &1 percent - please distribute 100 % |
| 022 | Cost center &1 was already used for distribution - please correct |
| 023 | Profit center and business area were already used - please correct |
| 024 | Enter mandatory partner - otherwise you cannot save |
| 025 | Variant number &1 is intended for estimated plan - please correct |
| 026 | Variant number &1 was already assigned - please correct |
| 027 | Variant number &1 will be deleted - enter a different number |
| 028 | Select a line for detailed processing |
| 029 | To copy a variant, you must select the variant you want to copy from |
| 030 | No appropriation request number was entered |
| 031 | No variant number was entered for the approp. request |
| 032 | Variant &1 does not exist for approp.request &2 - correct your entry |
| 033 | No access index was entered - please check access |
| 034 | Enter an increment manually |
| 035 | External number &1 for approp. request already exists. Please correct. |
| 036 | Approp. request number &1 was already used for projects. Please correct. |
| 037 | No lock argument was entered - locking/blocking is not possible |
| 038 | Appropriation request &1 is being processed by user &2 |
| 039 | Approp. requests are being processed by user &1 |
| 040 | Contact system specialist - Problems with blocking |
| 041 | Select a variant for calling depreciation simulation data |
| 042 | Contact your system specialist - internal error &1 |
| 043 | Order &1 is in order category &2 - maintenance order. Please check. |
| 044 | Order &1 has the wrong order category &2 - please correct |
| 045 | Order &1 is already assigned to the approp. request - please correct |
| 046 | Order &1 is already assigned to approp. request &2 - please correct |
| 047 | Order &3 belongs to controlling area &2 instead of &1 - please correct |
| 048 | Order &1 is assigned to WBS element &2 - please correct |
| 049 | There is no variant, for which this procedure can be carried out -check |
| 050 | Order &1 does not exist - please correct |
| 051 | Variant &1 will be approved - rejection will be removed - please check |
| 052 | No variant was selected for procedure &1 - no change is made |
| 053 | No plan versions are defined - please check |
| 054 | Variant &1 does not exist - please correct |
| 055 | No long text exists |
| 056 | You did not select a long text type - please select |
| 057 | The entries for the variants for copying long texts are inconsistent |
| 058 | You did not enter an appropriation request number for copying long texts |
| 059 | You did not enter a reference approp. req. number for copying long texts |
| 060 | Reason for investment &1 was already used for the distribution. |
| 061 | Distribution percentage rate &1 is larger than 100 - please correct |
| 062 | Distribution percentage rate &1 is not allowed - please correct |
| 063 | Environ.inv. reason &1 was already used for distribution - please correct |
| 064 | Structure indicator &1 is blocked for new approp. requests - change |
| 065 | System error - Project for the approp. req. does not exist - Termination |
| 066 | System error - cannot create project &1 for coding mask - termination |
| 067 | Termination during internal assign &1 - contact system administrator |
| 068 | Investment reason &1 does not exist - please correct |
| 069 | Environ. inv. reason &1 does not exist - please correct |
| 070 | Scale &1 does not exist - please correct |
| 071 | Version &1 is not defined - please correct |
| 072 | Version &1 cannot be used - please correct |
| 073 | Order is created when you save |
| 074 | Entry for fiscal year &1, program type &2, version &3 is not deleted --> |
| 075 | Assignment of the measure was deleted |
| 076 | Parameters not transferred correctly (copying type &V1&) - check |
| 077 | No plan values were copied - please check |
| 078 | Equipment &1 does not exist - correct this |
| 079 | Assignment of asset &1 &2 will be deleted when you save |
| 080 | Assignment of equipment &1 will be deleted when you save |
| 081 | Asset &1 &2 &3 is already assigned - please check |
| 082 | Partner function &1 not defined in partner detrm. proc. &2 |
| 083 | Partner dtrm. proc. &1 for approp. requests does not exist |
| 084 | Project definition &1 was activated --> Detailed information |
| 085 | Project definition &1 was not activated - inform your system administ. |
| 086 | Maintain an order type for creating the order |
| 087 | Enter a responsible company code needed for creating the order |
| 088 | Maintain required field |
| 089 | You entered a unit of measure w/o entering a quantity - enter quantity |
| 090 | Quantity &1 was entered without a unit - enter a unit of measure |
| 091 | A currency was entered without an amount - enter an amount |
| 092 | Value &1 was entered without a currency - enter a currency |
| 093 | WBS element &1 does not exist - please correct |
| 094 | WBS elem. &3 belongs to controlling area &2 not &1 - please correct |
| 095 | WBS element &1 is not a top WBS element - please correct |
| 096 | WBS element &1 is already assigned to this approp. request - correct |
| 097 | WBS elem. &1 is already assigned to approp. request &2 - correct |
| 098 | Reference approp. request &1 does not exist - please correct |
| 099 | Approp. req. type &1 in reference &3 different from &2 - check |
| 100 | Insert of IMAK had errors - contact your system administrator |
| 101 | Insert of IMAKT had errors - contact your system administrator |
| 102 | Insert of IMAKA had errors - contact your system administrator |
| 103 | Insert of IMAKZ had errors - contact your system administrator |
| 104 | Insert of IMAKZS had errors - contact your system administrator |
| 105 | Insert of IMAKPA had errors - contact your system administrator |
| 106 | Insert of IMAKPI had errors - contact your system administrator |
| 107 | Insert of IMAKPS had errors - contact your system administrator |
| 108 | Insert of IMAKPU had errors - contact your system administrator |
| 109 | Insert of IMAKPW had errors - contact your system administrator |
| 110 | Insert of IMAV had errors - contact your system administrator |
| 111 | Insert of IMAVZ had errors - contact your system administrator |
| 112 | Insert of IMAVT had errors - contact your system administrator |
| 113 | Reserved for update task AIA3 |
| 114 | Reserved for update task AIA3 |
| 115 | Error in update of IMAK - contact your system administrator |
| 116 | Error in update of IMAKT - contact your system administrator |
| 117 | Error in update of IMAKA - contact your system administrator |
| 118 | Error in update of IMAKZ - contact your system administrator |
| 119 | Error in update of IMAKZS - contact your system administrator |
| 120 | Error in update of IMAKPA - contact your system administrator |
| 121 | Error in update of IMAKPI - contact your system administrator |
| 122 | Error in update of IMAKPS - contact your system administrator |
| 123 | Error in update of IMAKPU - contact your system administrator |
| 124 | Error in update of IMAKPW - contact your system administrator |
| 125 | Error in update of IMAV - contact your system administrator |
| 126 | Error in update of IMAVZ - contact your system administrator |
| 127 | Error in update of IMAVT - contact your system administrator |
| 128 | Reserved for update task AIA3 |
| 129 | Reserved for update task AIA3 |
| 130 | Error with insert BPJA - contact your system specialist |
| 131 | Error with insert BPGE - contact your system specialist |
| 132 | Delete of IMAKT had errors - contact your system administrator |
| 133 | Delete of IMAKA had errors - contact your system administrator |
| 134 | Delete of IMAKZ had errors - contact your system administrator |
| 135 | Delete of IMAKZS had errors - contact your system administrator |
| 136 | Delete of IMAKPA had errors - contact your system administrator |
| 137 | Delete of IMAKPI had errors - contact your system administrator |
| 138 | Delete of IMAKPS had errors - contact your system administrator |
| 139 | Delete of IMAKPU had errors - contact your system administrator |
| 140 | Delete of IMAKPW had errors - contact your system administrator |
| 141 | Delete of IMAV had errors - contact your system administrator |
| 142 | Delete of IMAVZ had errors - contact your system administrator |
| 143 | Delete of IMAVT had errors - contact your system administrator |
| 144 | Delete of IMAK had errors - contact your system administrator |
| 145 | System error during assignment of structure indicator |
| 146 | Reserved for update task AIA3 |
| 147 | Reserved for update task AIA3 |
| 148 | Reserved for update task AIA3 |
| 149 | Reserved for update task AIA3 |
| 150 | No authorization levels are defined - please check |
| 151 | Authorization levels do not have texts in language &1 - please check |
| 152 | Auth. levels do not have texts in master language &1 - please check |
| 153 | The versions do not have descriptions in language &1 - please check |
| 154 | The versions do not have descriptions in master language &1 - check |
| 155 | There is no description for approp. req. &1 variant &2 - please check |
| 156 | Select a variant for calling document management |
| 157 | Maintain the company code of the affected asset |
| 158 | You do not have authorization for function &1 |
| 159 | You do not have authorization for copying the new version ---> |
| 160 | Termination - no fields exist for screen selection |
| 161 | The old approval year &1 is after the new approval year &2 |
| 162 | Approval year &2 is missing in version &1 of program type &3 - check |
| 163 | Approval year &2 of version &1 is blocked - please correct |
| 164 | You made identical entries for the old version and the new version --> |
| 165 | Approval was rejected for &1 |
| 166 | Approval was postponed for &1 |
| 167 | Release was revoked for &1 |
| 168 | The deletion flag was removed for &1 |
| 169 | Master data was locked for &1 |
| 170 | The master data lock was removed for &1 |
| 171 | &1 was replaced by the measure |
| 172 | The replacement by a measure was revoked for &1 |
| 173 | The status 'technically complete' was revoked for &1 |
| 174 | The status 'technically complete' was set for &1 |
| 175 | The status 'complete' was revoked for &1 |
| 176 | Planning block was set for &1 |
| 177 | Planning block was removed for &1 |
| 178 | The status 'planning on measure' was set for &1 |
| 179 | The status 'planning on measure' was revoked for &1 |
| 180 | &1 was proposed for approval |
| 181 | &1 was approved |
| 182 | &1 was released |
| 183 | &1 was closed |
| 184 | The delete flag was set for &1 |
| 185 | Procedure &2 was carried out for &1 |
| 186 | The system cannot display planning for variant &1 |
| 187 | Variant &1 cannot be deleted - &2 status is active |
| 188 | Variant &1 cannot be deleted, since it is assigned to version &2 &3 |
| 189 | Variant &1 will be deleted when you save - please check |
| 190 | Approp. request &1 does not have any measures - no replacement made --> |
| 191 | WBS element &1 will be created when you save |
| 192 | Maintain the responsible company code for 'create WBS element' |
| 193 | Model order &1 does not exist - please correct |
| 194 | Model order &1 has an incorrect order category &2 - please correct |
| 195 | Approp. request &1 already exists - enter a different number |
| 196 | Approp. request number &1 is assigned internally - please correct |
| 197 | Equipment &1 is already assigned - please check |
| 198 | Incorrect system on function module for COPY parameter |
| 199 | App. req. &1 does not use standard layout - display by worklist only |
| 200 | *** Messages for Approp. Requests Info System *** |
| 201 | System error &1 occurred in program &2 |
| 202 | not used |
| 203 | More than one default role determination is defined |
| 204 | No authoriz. for approval level for plan vers. of &4 |
| 205 | Status does not allow cost planning on variant &1 |
| 206 | Error in status management for the variant |
| 207 | Status does not allow investment cost planning on variant &1 |
| 208 | Status does not allow planning of revenue on variant &1 |
| 209 | Planning of costs not allowed- planning lock on version for variant &1 |
| 210 | Planning of inv.costs not allowed-planning lock on version for variant &1 |
| 211 | Planning of revenue not allowed- planning lock on version for variant &1 |
| 212 | No plan profile found for appropriation request type &1 |
| 213 | The fiscal year variant for company code &1 was not found |
| 214 | The start and end date of planning could not be found in profile |
| 215 | Error while calculating the net present value |
| 216 | Error when calculating the internal rate of return |
| 217 | Error when calculating the payback period |
| 218 | No authorization for user status of &4 |
| 219 | The carry-forward indicator is set in more than one version. |
| 220 | Select only one line. |
| 221 | This selection level is not allowed here. |
| 222 | Use different partner functions |
| 223 | You can no longer change the control of number assignment |
| 224 | Critical area of number interval & reached (ENTER=Continue) |
| 225 | Last number of number range &1 is assigned (ENTER=continue) |
| 226 | No number can be assigned - contact your system specialist |
| 227 | Order &1 already exists and is now assigned |
| 228 | Another order is being created with order category &1 |
| 229 | Order &1 is identified as a preliminary project |
| 230 | Order &1 already exists and is already assigned |
| 231 | The system checked the data on the screen |
| 232 | Appropriation request type &1 is still being used |
| 233 | Value &2 does not exist for field &1 - correct |
| 234 | Value &2 does not exist for field &1 - correct |
| 235 | Not possible to delete approp. request &1 - project is active |
| 236 | The status does not allow deleting appropriation request &1 |
| 237 | Deleting app.request &4 not allowed - it is assigned to inv.prog. &1/&2 |
| 238 | Deleting app. request &2 not allowed due to assignment to inv. program |
| 239 | Deletion not possible, since variant &1 has a blocked version assignment |
| 240 | To delete the approp. request, use the 'save' function |
| 241 | Limited validation, since the system is not set to 'production' status. |
| 242 | Release is not allowed, since appropriation request &1 is not released |
| 243 | You do not have authorization for copying the variant assignments ---> |
| 244 | No preinvestment analysis figures are newly calculated |
| 245 | Preinvestment analysis figures were calculated again |
| 246 | No reference int. rates maintained for yield curve type &1 + currency &2 |
| 247 | No interest rate is maintained for reference interest rate &1 |
| 248 | Release is not allowed, since appropriation request &1 is not released |
| 249 | Changes to project definition not allowed due to approp. request &1 |
| 250 | Deletion is not allowed since appropriation request &1 exists |
| 251 | Partner function &1 cannot be used - correct |
| 252 | No changes were made to appropriation request &1 |
| 253 | The plan values are transferred to version &1 of the measure |
| 254 | The system cannot interpret change document for table &2 |
| 255 | No plan values are transferred to order or WBS element |
| 256 | There are no plan values on variant &1 |
| 257 | You cannot use approp. request type &1 without a project profile |
| 258 | No plan values exist for combined costs or revenue |
| 259 | Transfer of plan values not possible - there are more than 2 measures |
| 260 | Release is not possible since there is no measure - check |
| 261 | Project definition &2 is being processed by user &1 |
| 262 | Combined costs are negative |
| 263 | &1: &2 |
| 264 | Sum of plan values larger than overall plan value |
| 265 | &1: &3 > &2 |
| 266 | Check is complete: No errors were found |
| 267 | Inconsistencies were found in the plan data |
| 268 | Error in the calculation of the payback period |
| 269 | Error in call of AIA9 &1 &2 ---> contact your system administrator |
| 270 | Organizational units adopted automatically -> see long text |
| 271 | Error during transfer of plan values for &1 &2 |
| 272 | There is no plan profile in approp. request type &1 for plan maintenance. |
| 273 | No partner was entered for partner function &1. |
| 274 | No partner function is entered for partner &1. |
| 275 | Entries are missing for inv. program, approval year, inv.prog.position |
| 276 | You are not authorized to maintain plan values for variant &1 |
| 277 | You have only display authorization for plan value maintenance |
| 278 | Select a variant for plan value maintenance. |
| 279 | No authorization for &4 |
| 280 | In order to sort, select a field or position the cursor on a field |
| 281 | Original request &2 is assigned directly from alternate &1 |
| 282 | Controlling area &1 not same as &2 of original request &3. Correct. |
| 283 | Program type &1 not the same as &2 of original request &3. Please correct |
| 284 | Assignmt to original reqst &1 not possible due to status of app.req. &2 |
| 285 | Assignment to original req. &1 not allowed - overlap of versions &2 &3 |
| 286 | Assignment to original request &1 was deleted |
| 287 | Alternate approp. request &1 is being processed by user &2 |
| 288 | For detailed processing of alternate request, select an alternate request |
| 289 | The alternate selected is the current appropriation request itself |
| 290 | App. request &1 is an original app. request and cannot be deleted |
| 291 | Appropriation request cannot use itself as an original request |
| 292 | Division &1 was already used for the distribution - please correct |
| 293 | Material group &1 was already used for the distribution - please correct |
| 294 | Please create depreciation simulation data |
| 295 | Please create depreciation simulation data |
| 296 | Period &1 is not allowed |
| 297 | The year entered is not plausible. |
| 298 | Internal rate of return cannot be calculated due to the order of data |
| 299 | Enter a number |
| 300 | Check table for &1 is not maintained |
| 301 | Scale &1 does not exist - please correct |
| 302 | Priority &1 does not exist - please correct |
| 303 | Score &1 does not exist - please correct |
| 304 | Appropriation request &1 is blocked to master data changes |
| 305 | Variant &2 of approp. request &1 is blocked to master data changes |
| 306 | Plant &1 does not exist - please correct |
| 307 | Plant &1 is not assigned to company code &2 - please correct |
| 308 | Location &2 does not exist in plant &1 - please correct |
| 309 | Company &1 does not exist - please correct |
| 310 | Company code &2 does not belong to company &1 - please correct |
| 311 | Country/region &1 does not exist - please correct |
| 312 | Reason for investment &1 does not exist - please correct |
| 313 | Environ. inv. reason &1 does not exist - please correct |
| 314 | Division &1 does not exist - please correct |
| 315 | For dummy record, do not change percentages to &1 |
| 316 | Activity &1 cannot be carried out during the mass change |
| 317 | Transaction &1 can only be carried out using Workflow |
| 318 | Material group &1 does not exist - please correct |
| 319 | Master data cannot be locked because of Workflow |
| 320 | There is no variant, for which activity &1 is possible |
| 321 | Make % distribution either to cost centers or to bus.area/profit center |
| 322 | Approp. request status is 'created' - cannot change to 'tech.complete' |
| 323 | Inactive indicator &1 for status is wrong - only space or 'X' allowed |
| 324 | Number assgnmt app.req.type &1 w/o projects - capitalization not allowed |
| 325 | Project &1 is already active - activating it is not necessary |
| 326 | Number assignment app.req.type &1 w/o WBS - creating WBS not possible |
| 327 | WBS element &1 already exists - creating it is not possible |
| 328 | You chose incorrect function &1 for mass change - please correct |
| 329 | No appropriation requests were entered |
| 330 | Plan values cannot be transferred since no measure is assigned |
| 331 | Field changes for field &2 &3 are not permitted by field selection |
| 332 | Missing authorization - You cannot delete variant &1 |
| 333 | You cannot use appropriation request &1 as a reference |
| 334 | Activity '&2' cannot be carried out because of alternate request |
| 335 | Variant &3: Completion date &1 is after the startup date &2 |
| 336 | Variant &3: Implementation start date &1 is after completion date &2 |
| 337 | Variant &3: Implementation start date &1 is after startup date &2 |
| 338 | Enter a number |
| 339 | Error: Approp. request &1 is not marked for deletion - please check |
| 340 | Approp. request &1 is marked for deletion - change not possible |
| 341 | Approp. request &1 was replaced with measure - change not possible |
| 342 | With change of cost center &3, business area changed from &1 to &2 |
| 343 | With change of cost center &3, profit center changed from &1 to &2 |
| 344 | Deletion of appropriation request &1 is possible |
| 345 | Request. cost center a required field - profit ctr/bus. area insufficient |
| 346 | Requesting profit center a required field - cost ctr has no profit ctr |
| 347 | Requesting business area a required field - cost ctr has no business area |
| 348 | Requesting business area a required field - cost ctr has no business area |
| 349 | Requesting profit center is a required field - enter profit center |
| 350 | Select a row to choose an appropriation request |
| 351 | Layout does not exist |
| 352 | No version was entered for approval year &1 |
| 353 | No approval year is entered for version &1 |
| 354 | The capitalization date and the start-up date are different! |
| 355 | Enter a positive percentage rate |
| 356 | &1 % was distributed for environmental investment - check |
| 357 | &1 % was distributed for environmental investment - please correct |
| 358 | Deletion flag or indicator set for order &1 - assignment not possible |
| 359 | Deletion flag or indicator set for WBS &1 - assignment not possible |
| 360 | Asset class is not maintained! |
| 361 | The capitalization date is not maintained! |
| 362 | Depreciation simulation data was created |
| 363 | Depreciation simulation data was deleted |
| 364 | Depreciation simulation data was changed |
| 365 | Both asset class and capitalization date are not maintained! |
| 366 | Asset class not the same as asset class &1 in investment profile &2 |
| 367 | Asset class not the same as asset class in investment profile |
| 368 | Responsible cost ctr is required field - profit ctr/bus.area not enough |
| 369 | Responsible profit center is required field - no assignment in cost ctr |
| 370 | Responsible profit center is required field - enter a profit center |
| 371 | Responsible business area is required field - no assignment in cost ctr |
| 372 | Responsible business area is required field - enter business area |
| 373 | Entries for variant, version and approval year are contradictory |
| 374 | No variant exists for version &1 in approval year &2 |
| 375 | Choose a line with an entry in order to go to assets or equipment |
| 376 | To go to a measure, choose a measure |
| 377 | Measure is created when you save - display not yet possible |
| 378 | The deletion indicator is set for &1 - only display is possible |
| 379 | When both version and variant are chosen, system selects by version |
| 380 | Enter an approval year for investment program &1 |
| 381 | Enter an investment program |
| 382 | Enter an investment program and an approval year |
| 383 | You did not limit by variant or version |
| 384 | Tab layout &1 is still assigned to appropriation request type &2 |
| 385 | Variant and plan version and/or approval year not allowed |
| 386 | Plan version missing |
| 387 | Approval year missing |
| 388 | Plan version &1 does not exist in approval year &2 |
| 389 | No approp. request variant is assigned to plan version &1/&2 |
| 390 | Variant &1 does not exist in appropriation request &2 |
| 391 | An order with object number &1 does not exist |
| 392 | A WBS element with object number &1 does not exist |
| 393 | No variants have been transferred for appropriation request &1 |
| 394 | No plan data exists for the requested variant of app. request &1 |
| 395 | Plan data does not exist for variant &2 of appropriation request &1 |
| 396 | Cannot maintain required field &1 using layout & of app. req. type &3 |
| 397 | Overall plan val. variant &1 too long (max.&2 places + &3 decimal places) |
| 398 | Overhead variant &1 year &2 too long(max.&3 places + &4 decimal places) |
| 399 | Inv. costs variant &1 year &2 too long(max.&3 places + &4 decimal places) |
| 400 | Revenue f. variant &1 year &2 too long(max.&3 places + &4 decimal places) |
| 401 | Change indicator not found for change records: incorrect import |
| 402 | Internal error occurred during reading of plan data |
| 403 | Internal error: Structure BPIN could not be read for variant &1 |
| 404 | Multiple change records exist for year &1: incorrect import |
| 405 | There are no differences for variant &1 as compared to database |
| 406 | Total of overhead + investment costs for variant &1 exceeds &2 places |
| 407 | Total of overhead + invest.costs for variant &1 year &2 exceeds &3 places |
| 408 | To goto asset, enter asset first |
| 409 | To goto piece of equipment, enter piece of equipment first |
| 410 | Not allowed to delete approp. request &1 before commit |
| 411 | There is no plan data in the database for variant &1 |
| 412 | BAPIService.TransactionCommit missing after deletion of approp. req. &1 |
| 413 | System error |
| 414 | Cost center &1 does not exist on the date &2 |
| 415 | &1 not allowed as original app.req., it is assigned to another app.req. |
| 416 | Template &1 does not exist or is not usable in Sapscript |
| 417 | Template &1 does not exist or is not usable in Word |
| 418 | Template &1 does not exist or is not usable in Sapscript |
| 419 | Template &1 does not exist or is not usable in Word |
| 420 | Incorrect flag in change parameter &1 row &2 |
| 421 | You entered unit of measure &1 w/o entering a quantity - enter quantity |
| 422 | You entered currency &1 without an amount - enter an amount |
| 423 | Record does not exist in row &1 of parameter &2 - deletion not possible |
| 424 | Enter either cost center OR business area/profit center! (&1 row &2) |
| 425 | Cost center &1 already used for distribution (&2 row &3) |
| 426 | Record does not exist in row &1 of parameter &2 - changing not possible |
| 427 | The distribution percentage rate is larger than 100 (&1 row &2) |
| 428 | The distribution percentage rate is less than or equal to 0 (&1 row &2) |
| 429 | No cost center or business area/profit center is entered (&1 row &2) |
| 430 | Bus. area &1/profit ctr &2 already used for distribution (&3 row &4) |
| 431 | Distribution to cost center is not possible (&1 row &2) |
| 432 | Distribution to business area/profit center is not possible (&1 row &2) |
| 433 | Flags 'D' and 'X' are not allowed to appear together (&1 row &2) |
| 434 | Changing the cost center is not allowed (&1 row &2) |
| 435 | Changing the business area is not allowed (&1 row &2) |
| 436 | Changing the profit center is not allowed (&1 row &2) |
| 437 | Project definition &1 has deletion flag - creating WBS not possible |
| 438 | Lengths of parameters &1 and &2 are different |
| 439 | No division is entered (&1 row &2) |
| 440 | No material group is entered (&1 row &2) |
| 441 | No investment reason is entered (&1 row &2) |
| 442 | No environmental investment reason is entered (&1 row &2) |
| 443 | No company code is entered (&1 row &2) |
| 444 | No asset main number is entered (&1 row &2) |
| 445 | No asset subnumber is entered (&1 row &2) |
| 446 | No equipment number is entered (&1 row &2) |
| 447 | No order is entered (&1 row &2) |
| 448 | Order is not an internal order or maintenance order (&1 row &2) |
| 449 | No WBS element is entered (&1 row &2) |
| 450 | No partner function is entered (&1 row &2) |
| 451 | No partner is entered (&1 row &2) |
| 452 | Order &1 is being used - assignment is not possible |
| 453 | WBS element &1 is being used - assignment is not possible |
| 454 | An incorrect external number was entered |
| 455 | Error when creating PM order - return code: &1 - please check |
| 456 | Business area &1 does not agree with cost center &2 (&3 row &4) |
| 457 | Profit center &1 does not agree with cost center &2 (&3 row &4) |
| 458 | Maintain work center for "create PM order" for order type &1 |
| 459 | Due to entry in row &1, total of overhead exceeds maximum amount |
| 460 | Due to entry in row &1, total of investment costs exceeds maximum amount |
| 461 | Due to entry in row &1, total of revenue exceeds maximum amount |
| 462 | Plan value in row &1 has more than &2 places before the decimal |
| 463 | Due to entry in row &1, total overhead/inv.costs exceeds maximum amount |
| 464 | Due to entry in row &1, annual total of overhead/inv.costs is too high |
| 465 | Preinvestment analysis figures cannot be updated |
| 466 | Assign the appropriation request with a coding mask |
| 467 | Transfer of plan values not possible for PM order &1 - check |
| 468 | Cost planning not allowed for &1 &2 - no transfer of plan values |
| 469 | &1 &2 is not a planning element --> transfer of plan values not possible |
| 470 | Project definition &1 is deactivated --> choose a different project |
| 471 | Maintain the responsible company code before creating order |
| 472 | The check of the plan values found inconsistencies |
| 473 | PM order type &1 is not for investments - correct your entry |
| 474 | No workflow approver - the applicant = the approver |
| 475 | No workflow approver - correct your entry |
| 476 | Plan data is not managed in the selected target version |
| 477 | Target version selected is marked for "exclusive use" |
| 478 | Structure indicator &1 for approp. requests not allowed - please correct |
| 479 | Errors occurred during calculation of preinvestment figures |
| 480 | Line item display shows only records that are already updated |
| 481 | No line items can be displayed for the selected variant |
| 482 | Payback period cannot be calculated because of the payment series |
| 483 | Internal rate of return and payback period cannot be calculated |
| 484 | Coding masks have different structures. Conversion not possible. |
| 485 | Reference &1 cannot be used at the moment --> try again later |
| 486 | Enter a plant first |
| 487 | You do not have authorization for orders of order type &1 in plant &2 |
| 488 | The responsible work center is invalid |
| 489 | Customizing setting missing for order type &1 or plant &2 |
| 490 | Responsible profit center &1 is invalid - check |
| 491 | Responsible business area &1 is invalid - check |
| 492 | Error during number assignment - order cannot be created |
| 493 | &1 Variants processed correctly / number of errors: &2 |
| 494 | Error occurred during calculation of discounted cash flow rate |
| 495 | Currency &1 is not the same as controlling area currency &2 |
| 496 | Asset &1 &2 is already assigned (&3 row &4) |
| 497 | Asset &1 &2 is not assigned (&3 row &4) |
| 498 | Equipment &1 is already assigned (&2 row &3) |
| 499 | Equipment &1 is not assigned (&2 row &3) |
| 500 | &1 Variants processed correctly / number of errors: &2 |
| 501 | No records were found for your selection parameters |
| 502 | Variant &1 is not assigned to version &3 in fiscal year &2 |
| 503 | Incorrect entry - enter 'X' or ' ' (&1-&2) |
| 504 | Amount for &1 is too long (maximum &2 places + &3 decimal places) |
| 505 | No version entered |
| 506 | Customizing error in fiscal year variant &1 in controlling area &2 |
| 507 | Cost planning for year &1 not within planning interval &2 - &3 |
| 508 | Revenue planning for year &1 not within planning interval &2 - &3 |
| 509 | Deleting version assignment for variant &1 and version &2/&3 not allowed |
| 510 | Assigning variant &1 to version &2/&3 is not allowed |
| 511 | There is no reference date for preinvestment analysis figures |
| 512 | Status of appropriation request &1 does not allow changes |
| 513 | Approp. request &1 is an original request - do not assign to &2 |
| 514 | Only change flags 'X' and ' ' are allowed (&1-&2) |
| 515 | Date &1 is not allowed |
| 516 | The year entered is not plausible (&1) |
| 517 | Table parameter &1 is not unique |
| 518 | Appropriation request type &1 does not allow assignment of orders |
| 519 | Appropriation request type &1 does not allow assignment of projects |
| 520 | Approp. request &1 is not assigned to partner &2 in partner function &3 |
| 521 | Entering variant number only possible with external number assignment |
| 522 | No appropriation request type entered |
| 523 | No controlling area entered |
| 524 | Entering app.request number only possible with external number assignment |
| 525 | External number assignment - enter appropriation request number |
| 526 | Appropriation request number &1 is too long (max. 12 characters) |
| 527 | External number assignment - enter variant number |
| 528 | Internal field overflow: first delete and update investment costs |
| 529 | Internal field overflow: first delete and update overhead |
| 530 | Internal field overflow: first delete and update revenue |
| 531 | Annual total of cash flow too large due to entry in row &1 |
| 532 | Cash flow in year &1 exceeds maximum |
| 533 | Some specifications for asset are missing (&1 row &2) |
| 534 | No asset class for variant &1 |
| 535 | No capitalization date for variant &1 |
| 536 | &1% is distributed - enter a 100% distribution (&2) |
| 537 | Company code and asset main number are missinng (&1 row &2) |
| 538 | Assets and equipment have to be in separate rows (&1 row &2) |
| 539 | Appropriation request &1 is already assigned to original request &2 |
| 540 | Version &1 assigned to variant of alternate request in fiscal year &2 |
| 541 | Version &1 is already assigned to variant &3 in fiscal year &2 |
| 542 | Currency &1 is different from company code currency &2 |
| 543 | Enter a time period of less than 80 years |
| 544 | It is not possible to delete the last variant of approp. request &1 |
| 545 | There is no entry in field &1 although it is a required entry field |
| 546 | Document assignment was not copied due to lack of authorization |
| 547 | Field &1 is not ready for input - no entry is possible |
| 548 | Distribution of &1 not allowed |
| 549 | Currencies in company codes &1 and &3 do not agree |
| 550 | You are not authorized for the activity |
| 551 | There are more hits than are displayed |
| 552 | Planning is locked on variant &1 - changing plan values not possible |
| 553 | Variant &3 is already assigned to version &1/ &2 |
| 554 | Start-up date on &1 is before completion on &2 - check |
| 555 | Non-allowed workflow recipient, only &1, &2, &3, &4 allowed |
| 556 | This transaction is obsolete, use transaction &1 instead |
| 557 | This transaction is obsolete and can no longer be used |
| 558 | No appropriation request type set up for appropriation requests |
| 559 | Technical field overflow for approp. request &1 ---> see long text |
| 560 | Enter reduction amounts as positive |
| 561 | When entering years, you have to enter the first reduction year |
| 562 | The first &1 selection criteria are adopted |
| 563 | Document assignments were not transferred |
| 564 | Document assignments were not transferred |
| 565 | 'Insert IMAVC' had errors, contact your system administrator |
| 566 | 'Update IMAVC' had errors, contact your system administrator |
| 567 | 'Delete IMAVC' had errors, contact your system administrator |
| 568 | Reduction by absolute amount only possible based on CO area currency |
| 569 | The selected appropriation requests have different planning profiles |
| 570 | Appropriation request &1: Deletion indicator status already set |
| 571 | Appropriation request &1: Deletion flag not yet set |
| 572 | Appropriation request &1: Deletion indicator set successfully |
| 573 | Appropriation request &1: There are alternates without deletion flag |
| 574 | No archive file exists |
| 575 | Appropriation request &1 is archived - only display is possible |
| 576 | Project definition &1 does not exist |
| 577 | There are no WBS elements for project definition &1 |
| 578 | Error while copying the reference, processing terminated |
| 579 | Using a reference is not possible since project &1 already exists |
| 580 | Save first before creating another measure |
| 581 | Enter a value between 0 and &1 |
| 582 | The selected cost estimate was already transferred to a WBS element |
| 583 | Enter a key for the WBS element |
| 584 | Planning profile does not allow planning in object currency |
| 585 | Planning profile does not allow planning in controlling area currency |
| 586 | Reduction by absolute amounts only possible in controlling area currency |
| 587 | Planning profile &1 does not allow planning in controlling area currency |
| 588 | Cost center &3 in company code &2 |
| 589 | Approver role &1 is simultaneously defined as applicant |
| 590 | Percentage distribution of requesting business area is not allowed |
| 591 | Percentage distribution of requesting profit center is not allowed |
| 592 | Controlling areas differ in appropriation request and project |
| 593 | You do not have &1 authorization for any of the app.request variants |
| 594 | WBS element &1 is already assigned to appropriation request |
| 600 | ------- Messages for E@sy Cost Planning ------------------------------- |
| 601 | Cost estimate entered for variant &1 |
| 602 | Cost estimate deleted for variant &1 |
| 603 | First enter the implementation start date |
| 604 | Investment portion has to be between 0% and 100% |
| 605 | Variant &1 has cost estimate - manual planning not possible |
| 606 | Cost estimate for variant &1 changed |
| 607 | Variant &1/&2 has cost estimate -transaction not possible |
| 608 | App. req. &1 has variant(s) with cost estimate - transaction not possible |
| 609 | WBS element &1 has cost estimate - not possible to adopt plan values |
| 610 | Variant &1 has cost estimate - no longer possible to adopt plan values |
| 611 | Order &1 has cost estimate - no longer possible to adopt plan values |
| 612 | Cost estimate not found |
| 613 | Implementation start date &1 not within planning interval &2 - &3 |
| 614 | Variant &1: Easy Cost Planning calculation adopted 100% |
| 700 | ---------------Messages for Overview Planning---------------------------- |
| 701 | Overhead costs exceed maximum field length - change |
| 702 | Investment costs exceed maximum field length - change |
| 703 | Revenue exceeds maximum field length - change |
| 704 | Overhead costs exceed maximum field length because of entries |
| 705 | Cash flow exceeds maximum field length due to your entry |
| 706 | Overhead total (variant) exceeds maximum field length due to your entry |
| 707 | Inv. cost total (variant) exceeds maximum field length due to your entry |
| 708 | Comb.costs total (variant) exceeds maximum field length due to your entry |
| 709 | Revenue total (variant) exceeds maximum field length due to your entry |
| 710 | Cash flow total (variant) exceeds maximum field length due to your entry |
| 711 | First select a set of appropriation requests |
| 712 | No appropriation requests were found for your selection criteria |
| 713 | Selected set of appropriation requests cannot be planned simultaneously |
| 714 | Planning is not possible because there are no planning profiles |
| 715 | Lack of selection criteria can cause very long runtime |
| 716 | Maintain a start and end end date for planning interval |
| 717 | Planning interval is limited to a maximum of &1 years |
| 718 | Enter a plan version and an approval year |
| 719 | Enter variant name and meaning, or cancel |
| 720 | Selection variant &1 already exists - overwrite it? |
| 721 | "HISTORY" is invalid as a variant name - enter a different name |
| 722 | First choose a selection variant |
| 723 | Maximum number of selection options (&1) already reached |
| 724 | Selection list box number &1 already has a standard value |
| 725 | Enter position numbers within the interval from 1 to &1 |
| 726 | Choose a selection criteria using the entry help |
| 727 | Incorrect settings in system tables - inform SAP |
| 728 | Incorrect Customizing in table TAIF10 - make needed entries |
| 729 | Incorrect settings in system table - contact SAP |
| 730 | No data element name is defined for table field &1 - &2 |
| 731 | There are no appropriation requests for the selected program position |
| 732 | More than &1 appropriation requests meet your selection cirteria |
| 733 | Value field exceeds the maximum length - change |
| 734 | You have not made any changes that can be updated |
| 735 | Approp.request &1: Cumulative plan values larger than overall plan value |
| 736 | Appropriation request &1: Overhead costs are negative |
| 737 | &1: &2 |
| 738 | Line items for combined costs are displayed, if there are any |
| 739 | Final year of planning is less than the start year - correct your entry |
| 740 | Planning profile &1 (cost planng) does not exist for app.request type &2 |
| 741 | Planning profile &1 (rev. planng) does not exist for app.request type &2 |
| 742 | Planning interval cannot be determined from planning profiles |
| 743 | Planning profiles &1 and &2 have different currency settings |
| 744 | Internal error occurred during reading of plan values |
| 745 | Selection variant &1 does not exist |
| 746 | &1 |
| 747 | Make unique selection for field &1 |
| 781 | Changes not possible because app. requests already exist for &1/&2 |
| 801 | Delete all selection data - application &1, transactions &2 user &3? |
| 802 | Delete all selection data of application &1, transactions &2? |
| 803 | Selection data for application &1, transactions &2, user &3 deleted |
| 804 | All selection data for application &1, transactions &2 deleted |
| 805 | Combination &1 &2 does not exist -> use "Possible entries" function |