BRAIN -
The following messages are stored in message class BRAIN: .
It is part of development package RSROA_MISC in software component BW-BEX-OT. This development package consists of objects that can be grouped under "OLAP: Various".
It is part of development package RSROA_MISC in software component BW-BEX-OT. This development package consists of objects that can be grouped under "OLAP: Various".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Entry should have template ___.____ |
| 002 | Entry should have template ___/____ |
| 003 | Entry should have template ___-____ |
| 004 | Entry should have template ____.___ |
| 005 | Entry should have template ____/___ |
| 006 | The query is not correctly defined; the fiscal year variant is missing |
| 007 | The query cannot be executed as the data is inconsistent |
| 008 | Fiscal year variant is not unique |
| 009 | You can only work in client & |
| 010 | The SAP BW system must not be operated in client & |
| 011 | Error in number range for characteristic & |
| 012 | Not all conditions could be applied |
| 013 | Query & already exists. Please select another name. |
| 014 | The query & now reads on demand when navigating |
| 015 | Query & now reads all the data at once |
| 016 | Query & now selects data on demand when navigating and expanding hierchs |
| 017 | Invalid read mode |
| 018 | Repair performed successfully |
| 019 | Value '&' of characteristic & is not a number with & spaces |
| 020 | Date format in user master record cannot be interpreted |
| 021 | Enter period in the format __.YYYY |
| 022 | Enter the period in the form __/YYYY |
| 023 | Enter the period in the form __-YYYY |
| 024 | Enter the period in the form YYYY.__ |
| 025 | Enter period in the format YYYY/__ |
| 026 | The figure for the year is more than 2500 (please check your entry) |
| 027 | Value '&1' of characteristic &2 is not plausible |
| 028 | Query contains too many selection elements |
| 029 | Ranking is not possible with hierarchy lists |
| 030 | Fiscal year variant must be uniquely specified for this query |
| 031 | Cannot calculate calculated key figure &1 |
| 032 | No authorization for element &1 &2. Cannot apply condition |
| 033 | Could not carry out all normings |
| 034 | Number range object for characteristic & does not exist |
| 035 | Query &1/&2 contains non-cumulative values but no time restriction |
| 036 | Key figure &1 was not defined correctly |
| 037 | Hierarchy "&2"/&3/&4 does not exist for InfoObject &1 |
| 038 | Nodes for hierarchy &1 &2 &3 &4 could not be used for selection |
| 039 | Node &3 &4 is not in hierarchy &2 for InfoObject &1 |
| 040 | A node entry is not possible here |
| 041 | The query contains &1 nodes. Only &2 are allowed. |
| 042 | Select a valid hierarchy |
| 043 | Variable &1 is not permitted for the key date |
| 044 | Element &1 not defined correctly |
| 045 | Variable &1 for characteristic &2 has been converted to a required entry |
| 046 | Variable '&1' can be used only in a fixed filter |
| 047 | The cache was used despite virtual characteristics / key figures |
| 048 | Characteristic &1 allows no complex selections |
| 049 | Number range interval for characteristic & is missing |
| 050 | Error when reading cluster table RSIX for query & |
| 051 | Error when writing in the internal buffer. See OSS note 156957 |
| 052 | Limit the query to a smaller time range |
| 053 | Characteristic &1 &2 is not in the InfoProvider. Elimination not possible |
| 054 | Formula &1 with attribute &2 cannot be properly calculated |
| 055 | Characteristic &1 has no hierarchies |
| 056 | Activate the &1 InfoCube/InfoProvider Again |
| 057 | The situation is too far-fetched and is not supported |
| 058 | Cannot calculate character key figures |
| 059 | Value '&1' (hex. '&3') of characteristic &2 contains invalid characters |
| 060 | Value '&1' (hex. '&3') of characteristic &2 contains invalid characters |
| 061 | The node name '&1' contains not permitted characters |
| 062 | Sheet '&1' contains not permitted characters |
| 063 | Permitted charctrs for char. values in the Business Information Warehouse |
| 064 | Characters '&' are not capitalized in any language |
| 065 | Character '&' is not capitalized in any language |
| 066 | The characters have been saved |
| 067 | Value '&' for characteristic & contains byte 00 |
| 068 | Characteristic value '&1' of characteristic &2 is not &3-converted |
| 069 | &1 &2: Normalization not possible for character key figures |
| 070 | No SID found for value '&' of characteristic & (&) -> see longtext |
| 071 | Could not enter characteristic value &1 with SID &2 in table &3 |
| 072 | Internal structure for hierarchy & is inconsistent |
| 073 | Error when writing the SID &1 (value "&2") in table &3 |
| 074 | Hierarchy has been adjusted. Start the query again. |
| 075 | Read mode is converted to 'Read query when navigating' |
| 076 | You cannot place a presentation hierarchy on characteristic &1 |
| 077 | You cannot change variable &1 for charact. &2 during query navigation |
| 078 | Attribute &1 for characteristic &2 in variable &3 is not numerical |
| 079 | Attribute &1 for characteristic &2 in variable &3 does not exist |
| 080 | A summation is not possible for character key figures &1 &2 |
| 081 | Constant selection special function not available on 0INFOPROV |
| 082 | Constant selection special function not available on 0INFOPROV |
| 083 | A query cannot have globally constant elements in both structures |
| 084 | The property 'display non accounted values' is not allowed here |
| 085 | Variable &1 is not supported in exceptions |
| 086 | Key figure &1 &2 has unit &3. However &3 is not an InfoProvider |
| 087 | Different hierarchies are used for characteristic &1 |
| 088 | Characteristic &1 blocked for SID retrieval |
| 089 | Save table SIZE parameters were optimized for query &1 |
| 090 | 'Calculating result as...' was not executed |
| 091 | Function 'Calculating single values as...' cumulative was not executed |
| 092 | Calculated single values as ... has priority |
| 093 | Calculated key figure &1 is not defined correctly |
| 094 | Generation of master data routine for characteristic &1 blocked |
| 095 | Some numbers are scaled. They are parenthesized in debug mode [ ] |
| 096 | Numbers recalculated locally; paren. in debug mode [ ]; LPC_OFF = '&1' |
| 097 | Sorting by value has to be changed due to missing authorization |
| 098 | Condition & active |
| 099 | Local Calculation Active for & |
| 100 | Zero suppression is active |
| 101 | Characteristic &3 not available in InfoProvider |
| 102 | Query & uses deleted key figure & |
| 103 | Cannot use variable &1 in structure elements |
| 104 | Conditions are active. Results are parenthesized in debug mode [ ] |
| 105 | Char. &1 is cumulated. Values are parenthesized in debug mode [ ] |
| 106 | A key figure has to be uniquely specified in all cells |
| 107 | The query has to specify a key figure |
| 108 | Currency translation cannot be carried out for element &1 |
| 109 | No data was found that meets the used conditions |
| 110 | Key figure definition shows other value for key figure &1 |
| 111 | Local currency translation &1 active |
| 112 | Constant selection is activated. Figures are bracketed [ ] |
| 113 | Some key figures have exception aggregation. Figures are bracketed [ ] |
| 114 | Query cannot be packaged. Package level &1. Reason &2. |
| 115 | There are calculated elements. These results are bracketed [ ] |
| 116 | InfoProvider &1 does not exist |
| 117 | Variable &2 is not permitted for the target currency |
| 118 | SQL error occurred while reading value set table &1 |
| 119 | Variable &2 is not allowed for the conversion key date |
| 120 | Variable &2 is not allowed for the exchange rate type. |
| 121 | &1 is not a valid key figures for InfoProvider &2 |
| 122 | &1 is not a valid characteristic for InfoProvider &2 |
| 123 | Query &1/&2 may not have read mode 'A' |
| 124 | Transfer table THX_FORM is not correct |
| 125 | Unable to generate query &2 without errors |
| 126 | The program generated exceeds generation limits |
| 127 | No errors were found. |
| 128 | *---Deleted----* |
| 129 | Too many characteristics (&1) are relevant for authorization |
| 130 | Fiscal year variant should be established for key figure &1 |
| 131 | A results row cannot be calculated |
| 132 | Variable &2 is not permitted for the source currency |
| 133 | Presentation hierarchy &2 acts as a dynamic filter |
| 134 | Variable &1 for query key date has been changed to a required entry |
| 135 | Key figure &2 (&1) contains an unknown operation. |
| 136 | The query cannot be released for OLE DB for OLAP |
| 137 | The query cannot be released for OLE DB for OLAP |
| 138 | Normalization to query result not possible due to insufficient authoriz. |
| 139 | Variable &1 obsolete. Data currentness set to '&3' instead |
| 140 | Cumulated and ranked list exclude each other |
| 141 | 'Calculating result as...' was not executed |
| 142 | 'Calculate as...' is deactivated for lists with hierarchy |
| 143 | Technical Information: &1 &2 &3 &4 |
| 144 | Condition on &1, results row suppression active for &2 |
| 145 | Function 'Calculate as...' cannot be executed |
| 146 | In data currentness 'All data (9)' only local cache can be used |
| 147 | Partitioning type '&3' is not appropriate for query &1/&2 |
| 148 | For input-ready queries on aggregation levels, only local cache possible |
| 149 | The 'Display Non Postable Values' option has been activated |
| 150 | InfoProvider '&1' contains too many characteristics for the display |
| 151 | InfoProvider '&1' not available |
| 152 | InfoProvider &2 is not defined correctly. Compounding of &1 is incorrect. |
| 153 | Characteristic &1 of PartProvider &2 is supplied with two diff. values |
| 154 | Characteristic &1 is not filled by part provider &2 |
| 155 | The characteristic &1 has to have a fixed value &3 in InfoProvider &2 |
| 156 | Key figure &1 cannot be processed consistently in InfoProvider &4 |
| 157 | Key figure &2 cannot be processed consistently in InfoProvider &3 |
| 158 | Currency/unit cannot be initial |
| 159 | Key figures are input for currency/units &1 &2 &3 |
| 160 | &1 cannot be input-ready. It is a formula element. |
| 161 | &1 cannot be input. &2 is not a basic key figure. |
| 162 | &1 cannot be input. &2 has aggregation &3. |
| 163 | &1 cannot be input-ready. &3 does not belong to an InfoProvider. |
| 164 | Input-ready property of query &1/&2 is disabled |
| 165 | InfoProvider &1 does not contain an InfoCube or DS; no input possible |
| 166 | &1/&2 contains no input-ready elements; input-ready property is disabled |
| 167 | &1 cannot be input-ready |
| 168 | The settings for characteristic &1 and input mode &2 are incompatible |
| 169 | Input-ready property of &1/&2 disabled; &2 is still setting locks |
| 170 | The change data record &4 is not consistent |
| 171 | Key figure &2 has exception aggr. &3, thus ref.char. &1 must be filled |
| 172 | The change data record &2 is not consistent |
| 173 | &1/&2 no longer contains lockable objects; lock function disabled |
| 174 | System is trying to read with LOCK = True although it was not locked |
| 175 | System is trying to write data that were not locked |
| 176 | Data may be inconsistent and will not be buffered |
| 177 | In aggregation level &1, char. &2 must always be filled |
| 178 | Values cannot be entered in this context |
| 179 | Selections for characteristic &1 are too complex for default value |
| 180 | Exception &1 contains a non-numeric value and was deactivated |
| 181 | &1 is compounded and can only be set when &2 is fixed as well |
| 182 | &1 cannot be input ready. Translation key &2 is complex. |
| 183 | Error while reading table &1 (field &2) |
| 184 | Exception aggregation reference characteristic &1 not in InfoProvider &2 |
| 185 | Data in underlying InfoProvider has changed |
| 186 | Exception aggregation ignored; &2 has no fixed time characteristic |
| 187 | The selection element &1 includes too many rows |
| 188 | The property 'Constant Selection' is not permitted here &1 &2 &3 |
| 189 | 'Constant Selection' has to be set on all rows &1 &2 &3 |
| 190 | Key figure & is not correctly defined |
| 191 | Query & is not correctly defined. |
| 192 | An error occurred with the report to report interface during the jump |
| 193 | Errors occurred while generating the explain query |
| 194 | The key figure definition may not display the correct value for &2 |
| 195 | The key figure definition may not display the correct value for &2 |
| 196 | The key figure definition may not display the correct value for &1 |
| 197 | The key figure definition might not display the correct value for "&1" |
| 198 | The key figure definition shows another value for "&1" |
| 199 | Key figure & is not correctly defined. |
| 200 | Query contains selection elements with 'Constant Selection' only |
| 201 | Property constant selection for element &1 is not necessary |
| 202 | Test &1 &2 &3 &4 |
| 203 | The selection of &1: &2 &3 &4 is not correct (conversion exit ?) |
| 204 | &1 cannot be input-ready. &2 has ref. characteristic for exception &3. |
| 205 | Characteristic relationships for &1 are inconsistent, no input possible |
| 206 | Formula & uses operands with incompatible dimensions |
| 207 | Cumulation is active on &1. The selection is therefore < or =. |
| 208 | The key figure defintion may not display the correct value |
| 209 | Formula &1 (&2) contains a formal error |
| 210 | Query is not input-ready (temporal hierarchy join active on &1) |
| 211 | A hierarchy is active on &1. Cumulation is therefore not supported. |
| 212 | Key figure &1 is not correctly defined |
| 213 | Key figure &1 is not correctly defined |
| 214 | InfoProvider &1 is inactive. Please activate it. |
| 215 | InfoProvider &1 is inconsistent. Please correct this inconsistency. |
| 216 | No data found; dummy record generated for key figure definition |
| 217 | Number entered for &1 &2 has too many digits |
| 218 | Property "Constant Selection" is not possible for &1 |
| 219 | &1 cannot be input ready. &3 is not a real key figure. |
| 220 | There may not be more than 199 fiscal year variants |
| 221 | Fiscal year variant must be specified uniquely in query |
| 222 | Characteristic &1 has a constant value (&2) and cannot be used |
| 223 | InfoProvider &1 does not permit entries in this application |
| 224 | Query is input ready; &1 will be added as a free characteristic |
| 225 | Query &1/&2 changed to "Read Current Data" |
| 226 | Variable &1[&2] must not have an offset, length, boolean or dimension |
| 227 | Ref. char. is incorrectly assigned for InfoProvider &1 and key figure &3 |
| 228 | MultiProvider &1 contains two instances of InfoCube &2 |
| 229 | Query reads from near-line storage; it cannot be input ready |
| 230 | Could not buffer query structures. Buffer too small |
| 231 | For &1, parameter &2 can only have references to &3 (current value = &4) |
| 232 | Get data for aggregate part &1 of exactly one DTP from delta part &2 |
| 233 | Aggregate part &1 must not be a real-time InfoCube |
| 234 | Property 'All Basic Key Figures Input Ready' is not permitted for &1 |
| 235 | For &1, aggregate part &2 must have a fully-fledged delta method |
| 236 | Reading of aggregate part &2 deactivated |
| 237 | Reading of delta part &3 deactivated |
| 238 | Reading of delta pair &2 &3 was switched off |
| 239 | Value &2 of characteristic &1 is not in filter for query |
| 240 | Critical error during characteristic derivation |
| 241 | Variable &1(&2) is incorrect: field &3 = '&4' |
| 242 | Data was saved |
| 243 | &2 is not correct for variable &1. Changed from '&3' to '&4'. |
| 244 | Variable &1[&2] has VARTYP = '&4'; VPROCTP = '&3' is not allowed here |
| 245 | check_globv |
| 246 | check_globv |
| 247 | check_globv |
| 248 | check_globv |
| 249 | check_globv |
| 250 | check_globv |
| 251 | check_globv |
| 252 | Query definition & could not be read. |
| 253 | Query & is not correctly defined. |
| 254 | There is an incorrect recursion in the formula |
| 255 | Variable &2 is ignored if no entries are made at runtime |
| 256 | Note the following warning from OLAP |
| 257 | Query & is not correctly defined. |
| 258 | Key figure '&1' is not correctly defined |
| 259 | Changed display hierarchy for budgeting; no input possible |
| 260 | Characteristic &1 no longer exists in InfoProvider |
| 261 | Characteristic &1 has a constant value (&2) and cannot be used |
| 262 | Characteristic &1 has a constant value (&2) and cannot be used |
| 263 | &1 matches &2, but in InfoProvider &4, &3 has a larger value |
| 264 | For non-cumulative InfoCubes, time chars must be assigned identically |
| 265 | Characteristic &1 is not in InfoProvider &2 or is not visible |
| 266 | MultiProvider &1 is not consistent; input not possible |
| 267 | Characteristic &1 does not exist; exception aggregation not possible |
| 268 | Characteristic &1 must only exist once in exception aggregation |
| 269 | Node &1 is used more than &2 times as a link node |
| 270 | Workbook with ID & could not be loaded |
| 271 | Parameter & is missing in the URL |
| 272 | Error while saving view & |
| 273 | Error while saving item & |
| 274 | Error while loading view & |
| 275 | Error while loading item & |
| 276 | Error loading template & |
| 277 | Generic unique ID missing in view & |
| 278 | Web application processing terminated |
| 279 | Bookmarking not possible |
| 280 | Disaggregation not possible. No reference data found |
| 281 | No precalculated data found for data provider & |
| 282 | Error when generating dataProvider & |
| 283 | A presentation hierarchy must be active for characteristic '&1' |
| 284 | Variable &1[&2] is not defined properly |
| 285 | &1(&2) contains more than one default value. All but first deleted. |
| 286 | Variable &1 contains too many values |
| 287 | Cannot enter foreign currency in cell ("&1, &2") |
| 288 | Target currency &1 does not exist (currency translation key &2) |
| 289 | Error while reading data; navigation is possible |
| 290 | Error while writing master record "&1"/SID "&4" of characteristic &2 |
| 291 | Combination of top-down budgeting and disaggregation |
| 292 | Query uses selection on 0REQUID; data status '&1' -> '&2' |
| 293 | Query uses selection on 0REQUID; but data status = '&1' |
| 294 | No input for variable &2; variable will therefore not be interpreted |
| 295 | Value "&1" of characteristic &2 is not a valid UUID |
| 296 | Error in &. Database system & is not supported. |
| 297 | Each query will be regenerated with the next call-up |
| 298 | The query was successfully generated. |
| 299 | System error in program & and form & |
| 300 | Field &1: Invalid InfoObject &2 |
| 301 | "&" in routine 'HELP_VALUES_GET_WITH_TABLE' |
| 302 | System error: & & & & (internal error) |
| 303 | InfoProvider &1 contains complex aggregation level &2 |
| 304 | InfoProvider &1 contains InfoProvider &2 more than once |
| 305 | Aggregation level &1 contains &2 as InfoProvider |
| 306 | InfoObject &1 cannot be found in InfoProvider &2 |
| 307 | InfoObject &1 is not suited to be of data type DELTACHANM |
| 308 | &1 is restricted in element &2/&3 |
| 309 | Currency "&1" does not exist and will therefore be ignored |
| 310 | Unit "&1" does not exist and will therefore be ignored |
| 311 | Filter is the intersection of the original filter with FEMS &1 |
| 312 | Explicit sel. on NLS InfoProvider in MultiProvider are not supported |
| 313 | CMP problem occurred in characteristic &1 for InfoProvider &2 |
| 314 | Selection on characteristic &1 is not supported here |
| 315 | Value "&1" (HEX &4) of characteristic &2 contains an error at position &3 |
| 316 | Aggregates for InfoCube &1 cannot be used |
| 317 | SID = &2 does not exist for characteristic &1 or is not selected |
| 318 | &1/&2 does not contain input elements, but &3 is locked for example |
| 319 | Operation & is not possible for ad hoc queries |
| 320 | Class &1 returns value 0 for &2 (AP = &3; DP = &4) |
| 321 | InfoProvider &1 does not exist or was changed at runtime |
| 322 | &1 is not input-ready because unit conversion &2 is active |
| 323 | &2 data records contained errors for InfoCube &1 |
| 324 | InfoObject &1 is no longer in MultiProvider &2 |
| 325 | &1 has &2, but &1 has a higher value in MultiProvider &3 |
| 326 | Compounding inconsistency in aggregation level &3 for InfoObject &1 |
| 327 | Variable &1 is not permitted for time adjustment |
| 328 | Hierarchy "&1" is defective because fiscal year variant &2 does not exist |
| 329 | Leaf '&1' contains more than &2 characters |
| 330 | InfoProvider &1 does not exist |
| 331 | Week &1 does not exist. Specify a valid value |
| 332 | Invalid entry |
| 333 | Fiscal year variant &1 does not exist. Specify a valid value |
| 334 | Specify &2 dependent on the fiscal year variant &1 |
| 335 | Characteristic &1: Interval hierarchy + key day from data not supported |
| 336 | Hierarchy "&2" from characteristic &1 cannot be used here |
| 337 | Invalid parameterization of sorting for characteristic &1 in the DATA_SET |
| 338 | Characteristic &1 is not included in aggregation level &2 |
| 339 | Selection &1 = '&2' is not supported or is not useful |
| 340 | Date &1 is invalid |
| 341 | Factory calendar &1 does not exist |
| 342 | Date &1 lies outside of the factory calendar &2 validity |
| 343 | Runtime object from InfoProvider &1 updated |
| 344 | Char. &1 is not a time char.; exception aggregation &2 is not possible |
| 345 | No hierarchies in characteristic &1;exception aggregation &2 not possible |
| 346 | &1: The disaggregation settings will be ignored |
| 347 | The maximum number of temporary join hierarchies is &1 |
| 348 | Time characteristic &1 must be assigned identically for &2 |
| 349 | Query &1/&2 can only be used for the plan read module |
| 350 | You have selected too many entries |
| 351 | Authorization objects not saved |
| 352 | Authorization fields not saved |
| 353 | Authorization object &1 saved |
| 354 | Client &1 set as BW client |
| 355 | Variant &1 does not exist |
| 356 | Error while opening variant &1. Variant is not used |
| 357 | More than one hierarchy/derivation type used for characteristic &1 |
| 358 | "Excluding" not allowed for characteristic &1 - temporary hierarchy join |
| 359 | Characteristic &1 must have the same hierarchy as characteristic &2 |
| 360 | Invalid selection for characteristic &1 in the query filter |
| 361 | Variable &1 cannot be used in an exception/condition |
| 362 | OLAP check cannot be run yet for &1 |
| 363 | Bucket has been saved |
| 364 | Technical error in class &2 &3 characteristic &1 |
| 365 | Access type not possible for "characteristic relationships" result values |
| 366 | Error during SID assignment for characteristic 0REQUID (current value &1) |
| 367 | Error in InfoSet &1: Required parameter not supported for field &2 |
| 368 | Time stamp &1 in table RSMDATASTATE is invalid (InfoCube = &2) |
| 369 | Incorrect call of OLAP layer CL_RSR_OLAP; error in BW-BEX-ET (&1) |
| 370 | Incorrect identification of characteristic &1 in PartProvider &2 |
| 371 | Query uses the virtual characteristic &1; input not possible |
| 372 | &1 cannot be input-ready; &3 is calculated by user exit |
| 373 | Incorrect parameters in function module &1: Parameter &2 = &3 |
| 374 | The SPO does not contain homogeneous PartProviders (PartProv &1; &2) |
| 375 | Query contains non-cumulative key figures and other incompat. functions |
| 376 | The InfoProvider properties for &1 are not the same as the system default |
| 377 | Variable for "Data Integrity" cannot be used |
| 378 | Formula element '&1 &2' cannot be input-ready |
| 379 | InfoProvider &1 inconsistent: PartProvider &2 is not actively available |
| 380 | No exchange rate from &1 to &2 and date &3 found (currency transl. &4) |
| 381 | Cannot get a valid target currency - currency translation &1 |
| 382 | Aggregate cannot be used, as 0REQUID is in drilldown |
| 383 | The aggregate cannot be used as there is a complex selection for 0Requid |
| 384 | No valid source currency is specified for currency translation (&4) |
| 385 | Period 0000000 - No valid translation date to specify (&4) |
| 386 | No valid translation date to specify (&4) |
| 387 | Lower limit is greater than upper limit |
| 388 | Time adjustment was not possible (&4) |
| 389 | Variable &1 cannot be used in conversion type &2 |
| 390 | Error occurred during currency conversion (&1) |
| 391 | InfoCube &1 has been switched to 'Load'; It cannot be saved |
| 392 | No dates could be found for period &1 &2 |
| 393 | No dates could be found for year &1 &2 |
| 394 | Key figures with formula aggregation are in square brackets [ ] |
| 395 | Key figures with internal business volume are in square brackets [ ] |
| 396 | Reference characteristic &1 is probably not suitable for &2 |
| 397 | Bucket & not found |
| 398 | InfoSet &1 does not return any data. See long text |
| 399 | Untreated CATCH cx_root in class &1 method &2 |
| 400 | InfoCube & is not available. |
| 401 | Characteristic &1 must be contained in the navigation. |
| 402 | *---Deleted----* |
| 403 | *---Deleted----* |
| 404 | Characteristic & must be uniquely selected in the query. |
| 405 | *---Deleted----* |
| 406 | *---Deleted----* |
| 407 | InfoObject &1 does not exist in InfoProvider |
| 408 | Characteristic &1 is not permitted for selection. |
| 409 | Characteristic &1 is not permitted for navigation. |
| 410 | *---Deleted----* |
| 411 | *---Deleted----* |
| 412 | *---Deleted----* |
| 413 | *---Deleted----* |
| 414 | Variable &1 is not allowed in a calculated key figure |
| 415 | Incorrect FRANGE row in FORM/DIM/FAC for InfoObject &1 |
| 416 | InfoObject & is used in both structures of the query |
| 417 | The definition of formula "&1" is empty |
| 418 | Variable &1 does not exist or is incorrectly used in "&4" |
| 419 | No results selected or available. |
| 420 | SELOPT/query variable &4 (&1) does not allow any further selections |
| 421 | Element &1 is not correct |
| 422 | Formula operation &1 is not correct (formula &2) |
| 423 | Entry &1 &2 not found in the DKF |
| 424 | *---Deleted----* |
| 425 | Calculation time 'before aggregation' is not allowed for &1 |
| 426 | Formal error in formula & (OiFLG = &2, &3) |
| 427 | Formula term &1 &2 &3 is not available |
| 428 | Element &1 is not correct |
| 429 | Operation &1 is not allowed here (formula &2) |
| 430 | Constant &1 is not permitted |
| 431 | InfoObject &1 must be selected uniquely in all cells |
| 432 | The characteristic value &1 for InfoObject &2 is not numerical |
| 433 | Variable &1 (&2) is not used in the query definition |
| 434 | Structure &1 contains no selection items |
| 435 | Variable &1 (&2) is not formally, correctly defined |
| 436 | Variable &1 cannot be used in InfoProvider &3 |
| 437 | Variable &1 is used for two different characteristics |
| 438 | Variable &1 cannot be used in this query |
| 439 | Variable &1 cannot be used in this query |
| 440 | Variable &1 cannot be used in this query |
| 441 | Variable &1 cannot be used in this InfoProvider |
| 442 | Variable &1 cannot be replaced in this query |
| 443 | Various aggregations are added in &. |
| 444 | Not possible possible to move variables &1 |
| 445 | Variable &1 cannot be used in this query |
| 446 | Variable &1 is used for two different characteristics |
| 447 | Time of calculation 'Before Aggregation' is obsolete |
| 448 | Unable to fill variable &1 from InfoProvider &2 |
| 449 | Formal error in query definition (DIM <-> FROM[NAV]) |
| 450 | Formal error in table: &1, IOBJNM: &2, field: &3, value: &4 |
| 451 | Characteristic &1 as selection in CON, but not in DIM |
| 452 | Unable to replace text variable &1 from hierarchy attribute |
| 453 | Formula variable &1 cannot be replaced from text |
| 454 | &1 &2 is empty |
| 455 | ....removed..... |
| 456 | Cell (KID = &1) contains a constant with various selections |
| 457 | Query &1 is too large. |
| 458 | Key figure &1 is incorrect. |
| 459 | Only "Equal To" and "Not Equal To" selections are permitted for char. &1 |
| 460 | Formal error in formula &1[&2]: FST-AGGR must be initial |
| 461 | Formal error in formula &1; FST aggregates, and so on, must be initial |
| 462 | Characteristic &1 set to '&2'; PartProvider &3 will not be read |
| 463 | Characteristic &1 is set to '&2'; PartProvider &3 returns just some data |
| 464 | Characteristic &1 set to '&2'; PartProvider &3 will not be read |
| 465 | ....removed..... |
| 466 | Query is input-ready; &1 will be added as a free characteristic |
| 467 | ... removed ... |
| 468 | Constant selection for element &1 is not necessary and will be ignored |
| 469 | Proposed values for characteristic &1 match filter |
| 470 | InfoObject &1 must be uniquely selected in the query |
| 471 | Key figure &1 &2 is not correctly defined. |
| 472 | ....removed..... |
| 473 | Variables for characteristic &1 cannot be processed |
| 474 | Variable &1 is replaced from the navigation status |
| 475 | Formal error in formula [&1] &2: CALLATE = '&3' is not allowed |
| 476 | Error in calculated key figure [&1] &2 |
| 477 | Characteristic "&1" cannot be used in structures |
| 478 | Characteristic &1 should be filtered in the query |
| 479 | Error while creating the runtime object for &1 |
| 480 | ....removed.... |
| 481 | Error while reading DTA_PRO for Infoprovider &1 |
| 482 | InfoProvider &1 does not support query access to nearline storage |
| 483 | MultiProvider hint for &1 in PartProvider &2 cannot be checked (&3) |
| 484 | Key figure definition does not correspond to definition |
| 485 | 'Always Suppress Results Rows' not used for &1 |
| 486 | &1: The disaggregation settings will be ignored |
| 487 | ...removed..... |
| 488 | You only have display authorization for the key date derivation type &1 |
| 489 | You do not have authorization for the key date derivation type &1 |
| 490 | The key date derivation type &1 is locked by the CTO |
| 491 | The key date derivation type &1 is locked by user &2 |
| 492 | The key date derivation type &1 does not exist in version &2 |
| 493 | The key date deriva. type &1 includes an invalid time characteristic &2 |
| 494 | The key date derivation type &1 includes an invalid derivation type '&2' |
| 495 | The key date derviation type &1 is correctly defined |
| 496 | The key date derivation type &1 already exists |
| 497 | The key date derivation type &1 does not exist |
| 498 | The key date derivation type &1 was deleted |
| 499 | InfoProvider &1 not activated correctly |
| 500 | Error in the query definition &1 &2 |
| 501 | Unknown or deleted query |
| 502 | Invalid filter on &1: Filter changed |
| 503 | The number of days in the key date derivation type &1 is initial |
| 504 | The key date derivation type &1 for InfoProvider &3 not applicable |
| 505 | Two different hier. not allowed for elimination of int. business volume |
| 506 | Illegal combination of bucket with compounding for characteristic &1 |
| 507 | Query cannot be generated: Circular argument in variable replacement |
| 508 | Illegal entry: Selection &2 on characteristic &1 contains operator "CP" |
| 509 | Time interval too big. Reset to to the maximum allowed value. |
| 510 | *** Begin RSRT info messages *** |
| 516 | Display query definition break point reached |
| 517 | Display table break point reached |
| 518 | Display generated report |
| 523 | Breakpoint - Check Authorization Settings |
| 525 | Breakpoint - Check Value and Text for Requested SIDs |
| 526 | 'Delta buffer' breakpoint reached |
| 527 | 'Saving of application data' breakpoint reached |
| 528 | 'Plan buffer' breakpoint reached |
| 529 | Break points overview |
| 530 | *** End of RSRT info messages *** |
| 531 | Breakpoint MultiProvider SPLIT |
| 533 | Break point "VARIABLE Constructor" reached |
| 534 | Break-point 'Customer exit Variables - after ' |
| 535 | Break-point 'Customer exit Variables - before ' |
| 536 | Break-point 'Authorizations Variable ' |
| 537 | Break-point 'Personalization Variable - Read ' |
| 538 | Too many calculations in formula &1. The maximum number allowed is &2. |
| 539 | Variable &1 is badly formed (&2, &3, &4) |
| 540 | Queries adjusted successfully |
| 541 | Query & is reading the data |
| 542 | &1 is ready for input but is hidden |
| 543 | No SID could be found for &1 = '&2' (variable = &3) |
| 544 | Invalid handle &1 |
| 545 | Only basic key figures are allowed with 'Before Aggregation' calculation |
| 546 | &3 is not allowed with 'Before Aggregation' calculation |
| 547 | Invalid settings |
| 548 | All result rows filtered out |
| 549 | No settings found |
| 550 | Print request does not exist |
| 551 | Error during job scheduling |
| 552 | The print parameters need to be reset |
| 553 | No unique hierarchy found for characteristic &1 |
| 554 | Unposted values cannot be displayed for &1 |
| 555 | Software error (see long text). To correct, implement Note &1. |
| 556 | '&4' needs to be defined for variable &1[&2] with dimension '&3' |
| 557 | Applied condition "&4" does not return a unique result |
| 558 | Input-ready property of query &1/&2 has been revoked |
| 559 | Inverse formulas: General formal error |
| 560 | Inverse formulas are not permitted if the key figure is in the filter |
| 561 | Inconsistent carrier &1 of a formula group (see long text) |
| 562 | Inconsistent formula group: Element &1 is in the wrong structure |
| 563 | Carrier &1 of the formula group is not in the key figure structure |
| 564 | Input-ready formula &1 does not have any inverse formulas |
| 565 | Input-ready %GT formula &1 has an illegal operand |
| 566 | Input-ready deactivated; cell redefinition in inverse formula |
| 567 | Input-ready deactivated: Cell redefinition in inverse formula |
| 568 | Inverse formula is missing for &2 for input-ready formula &1 |
| 569 | Illegal operands in inverse formula &2 |
| 570 | Input-ready formula &1 uses illegal exception cell &2 |
| 571 | Input-ready %GT formula &1 is not correct: Data type not correct |
| 572 | Input-ready deactivated; cell redefinition in inverse formula |
| 573 | Input-ready deactivated; a > formula is being used |
| 574 | '&1 &2' cannot be disaggregated because of cyclical references |
| 575 | BWA/SAP HANA will be used despite virtual characteristics/key figures |
| 576 | The value for '&1 &2' cannot be calculated |
| 577 | Element '&1 &2' has internal value '&3' |
| 578 | The content can only be displayed for buckets without reference tables |
| 579 | You cannot sort or set conditions on a hidden cell |
| 580 | Connection to remote InfoCube &1 failed. System &2 reports "&3". |
| 581 | Input-ready formula '&1 &2' cannot be inverted |
| 582 | Element '&1 &2' entered |
| 583 | Element '&1 &2' is fixed |
| 584 | Element '&1 &2' calculated |
| 585 | Element '&1 &2' is temporarily fixed or not input-ready |
| 586 | The total of element '&1 &2' must not be null |
| 587 | Overflow while inverting element '&1 &2' |
| 588 | No data records found for distribution |
| 589 | Distribution targets are not changeable or have already been changed |
| 590 | Activity canceled |
| 591 | No authorization (structure element &1 &2) |
| 592 | Division by 0 (structure element &1 &2) |
| 593 | Value cannot be calculated (structure element &1 &2) |
| 594 | No aggregation allowed (structure element &1 &2) |
| 595 | Numerical overflow (structure element &1 &2) |
| 596 | Cannot convert value "&1" (characteristic &2) to internal format |
| 597 | &1 in variable '&2' is not supported; characteristic is numeric |
| 598 | The compounded display attribute &1 is not supported |
| 599 | For characteristic &, enter value in a permitted format |
| 600 | An error occurred with the maintenance of the query directory. |
| 601 | Query & does not exist. Therefore, no deleting is possible. |
| 602 | Query & (InfoCube &) does not exist. Therefore, no change is possible. |
| 603 | The definition of query & (InfoCube &) was saved. |
| 604 | Definition of query & (InfoCube &) was deleted. |
| 605 | The requested query &2/&1 does not exist on the current server |
| 606 | Definition of query & (InfoCube &) is incomplete. |
| 607 | No texts in language & maintained for query &. |
| 608 | Query & (InfoCube &) was saved. |
| 609 | & is not a valid number. |
| 610 | Handle & is unknown to the message collector. |
| 611 | No texts were maintained in language &2 for variable &1 |
| 612 | Text variable &1 in "&3" cannot be replaced - value is not unique |
| 613 | Number variable & cannot be replaced in element &3 |
| 614 | Queries & do not exist in the query directory |
| 615 | Query already exists |
| 616 | Query &1 imported successfully |
| 617 | Moved value &1 is not within the allowed value range |
| 618 | Unable to move &1; fiscal year variant is ambiguous |
| 619 | Value &2 is too long for variable &1 |
| 620 | Characteristic & is not available. |
| 621 | Enter a valid date with the following format: '&3' |
| 622 | Enter a valid date time with the following format: '&3' |
| 623 | Enter a value |
| 624 | Enter a numeric value |
| 625 | Conversion of values of data type & not possible. |
| 626 | Please enter a valid value for characteristic &. |
| 627 | Value '&2' is not valid for variable &1 or does not exist |
| 628 | Please establish variable & unequivocally. |
| 629 | Specify a value for variable & |
| 630 | Value for variable & is too large. Please enter a smaller value. |
| 631 | Specify a valid interval for variable & |
| 632 | No value could be determined for variable &. |
| 633 | Variables contain invalid values. |
| 634 | Handle & is unknown. |
| 635 | Query & could not be opened. |
| 636 | Query & could not be deleted |
| 637 | Runtime object for handle & could not be generated. |
| 638 | Runtime object for handle & could not be deleted. |
| 639 | Runtime object for handle & could not be updated. |
| 640 | Entry of the variable value was canceled. |
| 641 | Variable & could not be replaced. |
| 642 | Enter a valid value for the variable &1 |
| 643 | Value '&2' for variable &1 is invalid |
| 644 | Fatal error carrying out SAP Exit variable & |
| 645 | Variable & is no longer used in the query |
| 646 | Value of variable & is converted automatically |
| 647 | Conversion of the workbook only becomes effective after storing |
| 648 | Variable value & must be numeric |
| 649 | Error for variable &2 in customer enhancement &1 |
| 650 | Characteristic &2 deleted from InfoCube &1. Adjust the query |
| 651 | Characteristic &2 was changed in InfoCube &1. Adjust the query |
| 652 | Key figure &2 was changed in InfoCube &1. Adjust the query |
| 653 | Key figure &2 was deleted in InfoCube &1. Adjust the query |
| 654 | Characteristic & is not numeric, so it no movement is possible. |
| 655 | No values available or not authorized to display |
| 656 | Could not determine a value for variable & from the authorizations |
| 657 | Value "&1" for user-exit variable &2 is invalid |
| 658 | Beginning date &1 is smaller than end date &2 |
| 659 | Function module does not exist for SAP exit variable &1 |
| 660 | Item type &1 not allowed! |
| 661 | Query &1 successfully opened. |
| 662 | Grid successfully generated |
| 663 | Double-click not supported for this cell |
| 664 | Message handler could not be intialized |
| 665 | Query could not be opened! GENUNIID is invalid. |
| 666 | Error when loading the query definition. Processing terminated. |
| 667 | Query handle & is invalid. |
| 668 | The request contains an invalid coordinate specification. |
| 669 | Characteristic specified several times in the request. |
| 670 | An error occurred when getting data from the processor. |
| 671 | Invalid position of key figures specified. |
| 672 | Request is empty. No processing. |
| 673 | Internal error: No key figures could be assigned to a certain cell. |
| 674 | Maximum number of columns (&) exceeded. Result is incomplete. |
| 675 | Maximum number of rows (&) exceeded. Result is incomplete. |
| 676 | No appropriate data records found. |
| 677 | No key figure specified by request. Processing terminated. |
| 678 | No value transferred for parameter &. |
| 679 | No complex selection possible for variable &. |
| 680 | The specified variable & is unknown. |
| 681 | Characteristic & is unknown. |
| 682 | Invalid request. No UUID specified for key figure. |
| 683 | Error when making the settings for &1. |
| 684 | Hierarchy &1 is invalid for key date &2. |
| 685 | Hierarchy '&1' in version '&2' not found for key date &3 |
| 686 | The hierarchy with HIESID &1 and SVER &2 was not found |
| 687 | Node &1 with predecessor &2 not found in hierarchy "&3" |
| 688 | Query was changed! Exception &1 no longer available. |
| 689 | Query was changed! Requirement &1 no longer available. |
| 690 | Query was changed! Element &1 no longer exists in the structure |
| 691 | Query was changed! Settings for attribute &1 have not been transferred. |
| 692 | Query was changed! Characteristic &1 no longer exists. |
| 693 | You can only have one hierarchy in the rows axis! |
| 694 | You cannot have any hierarchies in the columns axis! |
| 695 | You cannot use hierarchies or an additional characteristic in drilldown |
| 696 | Maximum number (&) of drilldown characteristics is exceeded |
| 697 | The currency translation type & is not available in the system |
| 698 | Cannot apply currency translation type & in InfoCube & |
| 699 | Currency translation type & cannot be used here. |
| 700 | Table & could not(!) be modified. |
| 701 | Currency translation type & was successfully saved. |
| 702 | Please select an existing currency translation type. |
| 703 | Please enter a valid exchange rate type. |
| 704 | Please select a valid InfoObject. |
| 705 | Please select a valid currency. |
| 706 | Please select a valid callup point. |
| 707 | Please select a valid date. |
| 708 | Currency translation type & was deleted. |
| 709 | Currency translation type & is already being edited. |
| 710 | Currency translation type & is already available. |
| 711 | Only display mode possible because of transport system. |
| 712 | Conflict: Target currency already established in currency transl. type &. |
| 713 | Please enter a target currency. |
| 714 | No exchange rates maintained for ex. rate type &1 and target currency &2. |
| 715 | D version of currency translation type &1 was not activated. |
| 716 | D version of currency translation type &1 was successfully activated. |
| 717 | No D version available for currency translation type &1. |
| 718 | CATT: No master data available for comparison |
| 719 | CATT: Table &1 changed: Stack no. &2 |
| 720 | CATT: Trace &1 is not available |
| 721 | CATT: Open trace in mode '&' |
| 722 | CATT: Close trace in mode '&' |
| 723 | CATT: No trace found for selection |
| 724 | CATT: No trace available in the system |
| 725 | CATT: Error when recording |
| 726 | CATT: Trace termination (short dump) when recording |
| 727 | CATT: Inconsistency with data staging |
| 728 | CATT: Tables have changed |
| 729 | CATT: Trace & executed |
| 730 | Reporting Agent setting already exists: &1 |
| 731 | Key figure &1 cannot be triggered |
| 732 | CATT: Recording of master mode canceled |
| 733 | CATT: No trace log exists |
| 734 | CATT: Function only implemented in SAP systems |
| 735 | Unallowed combination-Exch.rate type from variable and e.r.type from IO |
| 736 | Select a variable |
| 737 | CATT: Trace &1 was executed successfully in mode '&2' |
| 738 | Variable &1 not in query |
| 739 | Variable &1[&2] must be input ready |
| 740 | Please select an existing currency translation type |
| 741 | Variable &1[&2] cannot be input-ready |
| 742 | Invalid input for variable "&1" |
| 743 | Initial RANGE line for customer exit variable &1 is ignored |
| 744 | Initial RANGE-SIGN for customer exit variable &1 is corrected |
| 745 | Initial RANGE-OPT for customer exit variable &1 is corrected |
| 746 | Initial RANGE-LOW for customer exit variable &1 corrected to # |
| 747 | Variant names with more than &1 characters are not always supported |
| 748 | Text variable &1 in "&3" cannot be replaced - value not found |
| 749 | Variable &1 in query properties must be a "single value" variable |
| 750 | Please enter the user first |
| 751 | User already activated for the logging |
| 752 | First select a line |
| 753 | & is not a user of the system |
| 754 | User '&' is activated for the logging |
| 755 | User '&' was deactivated |
| 756 | Reorganization successfully concluded |
| 757 | F4 help defective |
| 758 | A query must be selected first |
| 759 | Maximum number of pages exceeded: Sort number &1 |
| 760 | No variant exists for the query |
| 761 | Characteristic sequence has changed: Check break areas |
| 762 | No print parameters for the batch mode printing are maintained |
| 763 | No suitable data found |
| 764 | A sort number must first be chosen |
| 765 | The technical name &1 given has been used already |
| 766 | Only queries with structures are allowed when printing |
| 767 | Scheduling package is empty |
| 768 | Select a query variant for the selected setting |
| 769 | Characteristic and Attribute columns are too wide |
| 770 | No columns chosen for the output |
| 771 | Scheduling a job is only possible in display mode |
| 772 | Trace successfully written to the transport request |
| 773 | Error when attempting to write the trace to the transport order |
| 774 | Error when calling up the document |
| 775 | You first have to give the setting a technical name |
| 776 | Setting &1 was added to the object list of order &2 |
| 777 | Technical name &1 is not in the customer namespace |
| 778 | The setting must first be saved |
| 779 | The setting is still being used in scheduling packets |
| 780 | &1 saved successfully |
| 781 | &1 is already saved |
| 782 | Internal error when activating &1 |
| 783 | &1 is already active |
| 784 | &1 was successfully activated |
| 785 | &1 deleted |
| 786 | No active version is available |
| 787 | You are not authorized to carry out deletion |
| 788 | Scheduling packet &1 is not available |
| 789 | Setting &1 is not available |
| 790 | Setting &1 is not suitable for printing in the background |
| 791 | Setting &1 is not suitbale for Exception Reporting |
| 792 | Query &1 for setting &2 is not available (active) |
| 793 | Packet &1 has been added to the object list for request &2 |
| 794 | Query does not contain any variables, variant maintenance not possible |
| 795 | Select the type of setting |
| 796 | Results row suppression and "display as hierarchy" active:&1 &2 |
| 797 | Variant &1 for query &2 (InfoCube &3) was converted successfully |
| 798 | Start conversion for variant &1 of query &2 (InfoCube &3) |
| 799 | Enter valid values for variables "&1" and "&2" |
| 800 | You do not have the authorization for component &3 |
| 801 | You do not have the authorization for the selected InfoCatalog |
| 802 | You do not have the authorization for workbook &1 |
| 803 | Unposted values on navigation attribute &1 are not displayed |
| 804 | You do not have authorization to read object &1 '&2' |
| 805 | Your user master record is not sufficiently maintained for object &1 |
| 806 | No authorization for evaluation along hierarchy &3 |
| 807 | Error in the authorization check for authorization object &1; '&2' |
| 808 | Please first select an InfoObject |
| 809 | Please first select a hierarchy |
| 810 | Please transfer the InfoObject 0TCTAUTHH from technical content |
| 811 | Could not successfully write transport request (&1) |
| 812 | Error when reading the authorization buffer. Please consult SAP |
| 813 | You are only allowed to display the hierarchy to level &1 |
| 814 | The interval [&3,&4] for authorization &2, object &1 is not permitted |
| 815 | Determine the uppermost node of the hierarchy |
| 816 | Your authorized node &1 is not contained in hierarchy &2 (&3,&4) |
| 817 | Characteristic &1 does not exist. Check authorizations. |
| 818 | You have no authority for a characteristic value from characteristic &1 |
| 819 | No authority for the node from characteristic &1, hierarchy &2 (&3,&4) |
| 820 | No authorization to change object & |
| 821 | Object & cannot be changed because it still contains authorizations |
| 822 | Authorization object & still being used in programs. |
| 823 | Authorization field & still being used in authorization objects |
| 824 | Name of the authorization object is unsuitable. Please select another one |
| 825 | No authorization for inserting object to proifle generator |
| 826 | Error in the locking mechanism when inserting to the profile generator |
| 827 | Inserting in the profile generator is currently locked |
| 828 | Please select a name in the & name range for the authorization object |
| 829 | The authorization object is currently blocked |
| 830 | Name &1 for the authorization object is not in the correct namespace |
| 831 | Type &1 of the authorization does not allow hierarchy level data |
| 832 | Authorization object &1 not available. Create |
| 833 | Could not retrieve numbers from number range &1 (&2) |
| 834 | InfoObject &1 for authorization object &2 does not exist |
| 835 | Selection type &1 is not supported for InfoObject &2 |
| 836 | There are no hierarchies for characteristic &1 |
| 837 | Authorization field &1 exists already. Choose a different name |
| 838 | View &1 does not exist for query &2 |
| 839 | Activity (ACTVT) field could not be added to &1 |
| 840 | Some characteristics require aggregation authorization, for example, &1 |
| 841 | No variable specified for authorization-relevant characteristic &1 |
| 842 | TREX index &1 does not exist (use input help) |
| 843 | Specify a reference column from the table or index (input help) |
| 844 | Specify reference table or reference index |
| 845 | Specify a characteristic |
| 846 | Specify a bucket name |
| 847 | Enter a table name |
| 848 | TREX index "&1" created |
| 849 | Bucket &1 does not exist |
| 850 | Please select an InfoCube. |
| 851 | Please select an aggregate. |
| 852 | The drilldown contains currencies that might not match the key figures |
| 853 | The drilldown contains units that might not match the key figures |
| 854 | The following cells have been redefined: KID &1 |
| 855 | Auxiliary cells defined : KID &1 |
| 856 | Characteristic value &1 is illegal |
| 857 | Only single values are permitted for buckets. Char. value &1 has errors |
| 858 | Table &1 does not exist in DDIC |
| 859 | Table column &1 does not exist. Use input help. |
| 860 | Metadata for InfoObject &1 is inconsistent |
| 861 | For characteristic &1, input help mode &2 was executed instead of mode Q |
| 862 | For characteristic &1, input help mode &2 was executed instead of mode P |
| 863 | Cannot execute search; hierarchy is too large |
| 864 | The search is case-sensitive |
| 865 | Index column (attribute) &1 does not exist |
| 866 | No unposted values displayed on compound parent &1 |
| 867 | Unmapped MultiProvider characteristics are not initial. PartProvider &1 |
| 868 | Exception aggregation for constant &1 will be performed in BWA/HANA |
| 869 | No non-cumulative data read, as affected validity areas are empty |
| 870 | Please install suitable Excel version. |
| 871 | Please install Excel as viewer. |
| 872 | No exception aggr. in BWA for key figure &1 because of tempo. hier. join |
| 873 | No exception aggr. in BWA for key figure &1 as it is a plan data query |
| 874 | No exception aggregation in BWA for &1 because of virtual characteristics |
| 875 | No exception aggregation in BWA for &1 because aggregation not supported |
| 876 | No exception aggregation in BWA for &1 because of calculation before aggr |
| 877 | No exception aggregation in BWA for key figure &1 as it is a virtual KF |
| 878 | No exception aggregation in BWA for &1. There is no obvious reason why. |
| 879 | No exc. aggr. in BWA for key figure &1 because it is a non-cumulative KF |
| 880 | View (&1) saved successfully. |
| 881 | Enter the technical name. |
| 882 | No exc. aggr. in BWA for key figure &1 due to elimination of int bus vol. |
| 883 | No exception aggregation in BWA for &1 as no exception aggr. defined |
| 884 | No exception aggregation in BWA for &1 as exception aggr. not supported |
| 885 | No exception aggregation in BWA for &1 because of formula exc. aggr. |
| 886 | No exceptn aggr. in BWA for &1 because of mandatory char. &2 (reason: &3) |
| 887 | No exception aggr. in BWA for &1 because user decision is overridden |
| 888 | No exception aggr. in BWA for constant &1. User decision overridden. |
| 889 | Program "&1" for characteristic &2 not available |
| 890 | SID &1 for characteristic &2 could not be converted &3 |
| 891 | InfoObject &1 must not be used in the drilldown |
| 892 | &1 SIDs from characteristic &2 are missing (&3) |
| 893 | *-------------globv-check ---------- * |
| 894 | *-------------globv-check ---------- * |
| 895 | Shared memory overflow while writing cache. Check your memory settings. |
| 896 | Delta method not possible for non-cumulative key figures |
| 897 | &1 is numeric. Operator 'CP' in element &2 is not allowed. |
| 898 | Only one or no default value allowed for variable &1(&2). Range deleted. |
| 899 | There is already a variable with the name &. Choose another. |