CACSIB - Provisionen: Schnittstellen- und Schwebebearbeitung
The following messages are stored in message class CACSIB: Provisionen: Schnittstellen- und Schwebebearbeitung.
It is part of development package CACSCC in software component ICM. This development package consists of objects that can be grouped under "ICM: Commission Case 'Light'".
It is part of development package CACSCC in software component ICM. This development package consists of objects that can be grouped under "ICM: Commission Case 'Light'".
Message Nr ▲ | Message Text |
---|---|
001 | Commission case accepted at interface (application &) |
002 | Commission case rejected by interface |
003 | Commission case accepted by interface |
004 | Commission document &1: &2/&3 posted |
005 | Commission document could not be posted |
006 | ****** Post commission document... |
007 | Interface is in simulation mode - no DB update |
008 | Commission document &1: &2/&3 was released/reset |
009 | Commission document &1: &2/&3 was reversed |
010 | Commission document &1/&2: Posting cancelled (header) |
011 | Commission document &1/&2: Posting cancelled (row) |
012 | Commission case &1: &2/&3 (&4) accepted at interface |
013 | Commission case &1: &2/&3 (&4) set to pending |
014 | Commission case &1: &2/&3 (&4) was posted |
015 | Commission case could not be posted |
016 | * Post commission case ... |
017 | Document for commission case &1: &2/&3 (&4) does not exist |
018 | Document for commission case &1: &2/&3 (&4) has disappeared |
019 | Commission case &1: &2/&3 (&4) - Status change cancelled |
020 | Commission case &1: &2/&3 (&4) - Posting cancelled by processor |
021 | Commission case &1: &2/&3 (&4) - Change cancelled by processor |
022 | Commission case &1: &2/&3 (&4) - Has been released/returned |
023 | Commission case &1: &2/&3 (&4) has been cancelled |
024 | Commission case &1: &2/&3 (&4) has been changed |
025 | Commission case could not be changed |
026 | Commission case &1: &2/&3 (&4) does not exist |
027 | Commission case &1: &2/&3 (&4) processing target reached |
028 | Commission case &1: &2/&3 (&4) cannot be continued |
029 | Commission case &1: &2/&3 (&4) cannot be released |
030 | Commission document accepted at interface (application &) |
031 | Commission document &1: &2/&3 does not exist |
032 | Commission case accepted at interface |
033 | Commission document &1: &2/&3 was rejected |
034 | Commission document rejected at interface |
035 | Commission case &1: &2/&3 (&4) successfully updated/completed |
036 | NO document created for commission case |
037 | Commission case key is inconsistent |
038 | Inconsistent commission case; Action not possible |
039 | Inconsistent commission case; Data inconsistent |
040 | Required calculation date &1 is in the future |
041 | Commission document &1/&2 has already been reversed |
042 | Select a participant |
043 | Invalid external number &1 in field &2 for number counter &3 |
044 | Error during renumbering of &1 |
050 | Unknown processing category '&' |
051 | ***** Format commission document ... |
052 | Subobjects were assigned to commission case &1/&2 (&3) |
053 | Document category &1 cannot be posted directly in this release |
054 | Document header: Invalid entries in commission case reference |
055 | Invalid valuations filled |
056 | Invalid object reference in remuneration |
057 | Invalid valuation reference in remuneration row |
058 | Document header: Invalid entries in business object/transaction ref. |
059 | Document header: Invalid entries in document reference |
060 | Document is not permitted without remuneration and due date |
061 | Document must not contain a remuneration balance |
062 | Commission model currency in document line different from document header |
063 | Invalid amount in commission model currency in remuneration line |
064 | Invalid field filled in remuneration row |
065 | Invalid field filled in disbursement row |
066 | Invalid remuneration amount in contract currency in remuneration row |
067 | Incomplete disbursement row |
068 | No reference to remuneration line |
069 | No reference exists to remuneration line |
070 | Contract numbers for remuneration and settlement do not match |
071 | Special remuneration type &1 for cont &2 maintained in several places |
072 | Special commission: More than one instance of variance record & |
073 | Document must not have a balance for transfer postings |
074 | Select a document type first |
075 | Detail row(s) removed |
076 | Special commission: More than one instance of variance record & |
077 | Settlement item(s) removed |
078 | Document type '&1' does not permit manual reversal |
079 | Activity &1 is not permitted |
080 | No entries in table &1 for the specified selection criteria |
081 | Case/document &2: Field &1 does not contain a numeric value |
082 | Unknown document type '&1' |
089 | &1 Identifications found for a commission case |
090 | &1 entries removed from &2 |
091 | Number range interval &1 for object &2 and subobject &3 not found |
092 | Number range interval &1 for object &2 and subobject &3 not internal |
093 | Number range object &1 could not be found |
094 | Number range interval overrun &1/Object &2/Subobject &3 |
095 | Table &1 has key &2 more than once |
096 | Template number could not be assigned correctly (table &) |
097 | Case/document &1: &2 items had to be renumbered |
098 | Number range &1/&2 taken and reserved for process |
099 | No number range available for application &1 processing |
100 | *** Start of parameter setting error *********************************** |
101 | Work mode & is not allowed in the commission interface |
102 | &2 not maintained - will be corrected to &1 (&3) |
103 | Receipt year &1 is different from year &2 of the entry date &3 |
104 | Requested system version different from version found |
105 | Business object &/& (&) not fully specified |
106 | Business transaction &/& (&) not fully specified |
107 | Participant & (&) does not belong to a participation |
108 | Participation & has no participants |
109 | Activity & is operating on unknown object &/& |
110 | Special commission recipient & is not part of the commission case |
111 | Direct participant & for participant & (&) not known |
112 | Main participant & for participant & (&) not known |
113 | Higher-level object &/& for object &/& unknown |
114 | Object &/& unknown |
115 | Higher level object &/& to object &/& not known |
116 | Unknown business transaction &/& for business object &/& |
117 | Business transaction &/& for business object &/& not unique |
118 | Businuess object &/& for business transaction &/& already in the system |
119 | &: Reference to unreported commission case &/& (&) |
120 | Unknown business object type & |
121 | Unknown business transaction category & |
122 | Business transaction category & not allowed for business object type & |
123 | Object &/& was entered under object &/& |
124 | Object type & hangs under object type '&': Adjustment was carried out |
125 | &: & participants of the participation & do not have a share |
126 | &: Total of the participation & is greater than 100% |
127 | &: Total of the particpation & less than 100% |
128 | Unknown role & in participation &, participant & |
129 | No participant roles created for application & |
130 | Business transaction &/& for business object &/& is not changeable |
131 | Accounting clerk (&) cannot be the auditor at the same time |
132 | User & has no authority to act as an auditor |
133 | Business object &1/&2 already in the system in version &3 |
134 | Business object &1/&2 waiting in the system in version &3 |
135 | Commission case must be presented for inspection |
136 | Particpation relationship &1 (&2) does not belong to a participant |
137 | Relationship &3/&2 has invalid higher-level participant &1/&2 |
138 | Role &4 does not have entitlement category &3 |
139 | Entitlement refers to invalid, triggering participant |
140 | Entitlement does not refer to any triggering participant |
141 | Entitlement may not come from own participation |
142 | Correction to entitlement object and initiator |
143 | Business object &1/&2 does not allow entitlement categories (&3, &4) |
144 | Participant &1/&2 has an inconsistent entitlement category '&3' |
145 | Hierarchy cycle for participants &1/&2 for entitlement category &3 |
146 | Incomplete commission case: &1 |
147 | Incomplete commission case: &1 |
148 | Application & has no active business transactions for business object |
149 | Application & has no active business transactions |
150 | Application & has no active business objects |
151 | Appl. & has no active entitlement category for participant determination |
152 | External subobject &/& for business object &/& already in system |
153 | External subobject &/& for business object &/& not in system |
154 | External subobject &/& in commission case not named in bundling |
155 | External subobject &/& in business object &/& already bundled |
156 | External subobject &/& in business object &/& not bundled |
157 | Appliction &1 has currency &2, commission case currency &3 not allowed |
158 | No data for external subobject &/& for bundle in business object &/& |
159 | No rebundling information for external subobject &/& in commission case |
160 | Remuneration type & for special commission not active |
161 | Remuneration type & for special commission not allowed |
162 | Special commission type & is performance-related |
163 | Special commission item &1 has not been maintained correctly: &2 |
164 | Special remuneration &2 in item &1 is not performance-related |
165 | Special remuneration currency in item &1 set to &2 |
166 | Division by 0: Special remuneration in item &1 cannot be calculated |
167 | Special remuneration type & is performance-related |
168 | Business object &/& (&) already has more recent version & in system |
169 | Business (technical) access event: &1 (&2) |
170 | &1 settlement items deleted (items already paid out) |
171 | Remunerating business transaction &1/&2 contains version &3 |
172 | Enter either remuneration type or settlement type |
173 | Settlement type references remuneration group |
174 | Remuneration type &1 not active |
175 | Settlement type &1 not active |
176 | Remuneration currency not maintained set to &1 (row &2) |
177 | Unspecified currency is set to &1 (line &2) |
178 | No remuneration amount found - row & |
179 | No settlement amount found - line & |
180 | Special remuneration item & contains invalid character '*' |
181 | Copy business transaction overwrites current participant/relations |
182 | External subobject &/& for business object &/&: Internal error |
183 | Copy transaction overwrites current activities |
184 | Copy transaction overwrites current objects |
185 | Business object &1/&2 has been locked |
186 | External subobject &1 for business object &2 still being used by &3 |
187 | No commission case for business transaction &2 in business object &1 |
188 | External subobject &1/&2; Rebundling in a business object |
189 | Check special remuneration item &1; &2 |
190 | Business object &/& (&) already version for & in the system |
191 | Subobject &/& for business object &/& is unknown (rebundling) |
192 | Business object &1/&2 already in system with start date &3 |
193 | Int. subobject & is still used, but is currently not in commission case |
194 | Subobject &/& already rebundled by commission case &/& |
195 | Role '&4' does not have entitlement cat. 1 (activity) or 6 (group bus.) |
196 | No subordinate object has been defined for the leading subobject |
197 | Application & is live - version '*' is therefore not allowed |
198 | Release/rejection may only consist of a commission case header |
199 | Cancellation of interface function, no pending posting |
200 | *** Read-module interface ***************************************** |
201 | Commission case &/&/& (&) does not exist in the required form |
202 | Required business object &/&/& (&) not known |
203 | Required business transaction &/&/& (&) unknown |
204 | No commission case fulfilled your selection criteria |
205 | Incomplete identification of bus.obj. or bus.transaction (&1) |
206 | Business object &1 needs unique detailed description |
207 | Interface data is inconsistent; Record category & |
208 | Business object & not known (unbundled) |
209 | Transaction currency not filled, commission model currency &2 is set |
210 | Enter correct contract currency &2 (not &1) for &4 (line: &3) |
211 | Specified contract &1 not found in active version (line: &2) |
212 | Contract &1 not active, check of contract currency not possible |
213 | Enter numerical values only for the year |
220 | *******Manual document |
221 | Document &1/&2 was not found - resetting not possible |
222 | Document &1/&2 can be reversed |
223 | Document &1/&2 was reversed |
224 | No resetting of cancellation document &1/&2 (reversal of document &3/&4) |
225 | Document &1/&2 has already been corrected |
300 | *** ... ******************************************** |
301 | End of commission case processing |
302 | End of commission case processing with warning |
303 | End of commission case processing with error |
304 | Process step '&' |
305 | Process step '&' complete |
306 | Method for process step: '&' |
307 | Process event &1 (ID &2) |
308 | Object &1: Activity group &2, activity characteristic &3, acty type &4 |
309 | Commission case processing completed with serious error |
310 | Participation &1 |
311 | End of commission document processing |
312 | End of commission document processing with warning |
313 | End of commission document processing with errors |
314 | Processing target &1 was not possible: Status - &2 |
315 | Error in activity determination |
319 | Commission document processing ended with serious error |
320 | Row &2: Message type '&1'; Total of &3 of this type |
321 | Important messages: |
330 | *** Participation Construction ****************************************** |
331 | Formal Check of Object Data |
332 | Object data is being accepted |
333 | Determination of construction methods |
334 | Determine construction method for subobject &1/&2 |
335 | ==> Determination method &1 found |
336 | ==> Detemination methods &1 found |
337 | ==> No determination method found |
338 | Construction method &1 at event (&2/&3) unknown |
339 | No construction method found for subobject &1/&2 due to an error |
340 | Determine group components |
341 | Group &1 (method &2, basic subobject &3/&4) |
342 | Subobject &1/&2 |
343 | No data records exist for group &1 and method &2 |
344 | Use template |
345 | Error while reading template for method &1 |
346 | &1 participations, &2 activities, &3 participants |
347 | Call "participation construction" logical service |
348 | Exception &2 was triggered while calling function module &1 |
349 | Transfer constructed participations |
350 | -Field &1(&2) is not uniquely assigned within group |
351 | -Participation &1 has multiple definitions |
352 | -Participation &1 is not defined |
353 | -No activity exists for participation &1 |
354 | -No participant exists for participation &1 |
355 | -Relation references a non-existent participant (INV_POS &1) |
356 | -Participant &1: Entitlement object type &2 is not supported |
357 | -Participant &1: Ent.obj. &2 incorrect for ent.obj.type "Activity" |
358 | -Participant &1: Ent.obj. &2 incorrect for ent.obj.type "Participant" |
359 | -Participant &1: Unknown higher level participant &2 |
360 | -Participant &1: higher level participant is &1 |
361 | -Participant &1: Higher lvl participant &2 not in entitlement group &3/&4 |
362 | -Participation is not copied from construction to commission case |
363 | CACS_GET_COUNT_NUMBER: No number determined for &1(&2) |
364 | Attribute &1 references non-existent participant &2 |
365 | Participation &1 was added to commission case |
366 | Participation &1 contains errors |
367 | Error in constructed participation &1 (group &2, method &3) |
368 | No participation has been created |
369 | Subobject type &1 is not in the object hierarchy |
370 | Base object type &1 is not in object hierarchy |
371 | Base object type &1 is not a higher-level object to subobject type &2 |
372 | Base subobject (type &1) could not be determined for &2/&3 |
373 | No predecessor could be determined for &1/&2 |
374 | No object data for subobject &1/&2 could be determined |
375 | It is not possible to construct participation (case is pending) |
376 | No active version of function module &1 exists |
377 | Settings for participation construction could not be read |
378 | Determin.&1 in portfolio assignment has errors (FM &2, return code &3) |
379 | Dynamic creation of a variable (&1) contains errors |
380 | Default &1 used in the mapping rule is unknown |
381 | Error in the mapping rule for structure &1 |
382 | Call of function &1 by RFC in system &2 contains errors (&3) |
383 | Portfolio assignment read module for &1/&2 could not be determined |
384 | Communication structure of portfolio assignment for &1/&2 is not defined |
385 | Portfolio assignment structure &1 must be known in calling system |
386 | Local structure &1 must match structure &2 in system &3 |
387 | No active version of function module &1 exists in system &2 |
388 | Interface of function module &1 is incompatible (field &2) |
389 | Interface of function module &1 in system &2 is incompatible (field &3) |
390 | No commission contract could be determined for business object &1/&2 |
391 | Structure &1 is unknown in portfolio assignment |
392 | Maximum length of field &1 is &2 |
399 | &1 row(s) copied, &2 row(s) ignored |
400 | *** Processing participation ******************************************* |
401 | No evaluation path maintained for application & |
402 | Contract number & is not maintained in PD-Org |
403 | Contract & was not assigned at &: & |
404 | Position & not assigned to any organizational unit |
405 | & &: Commission contract & already assigned |
406 | No current plan variant set |
407 | No active version of the evaluation path available |
408 | No active version of the evaluation path available for the time given |
409 | No entries found for evaluation path & |
410 | There are too many cost centers under organizational unit & |
411 | Business partner can only be created for positions or organizat. units |
412 | Object & of type & does not exist |
413 | Start and finish date of assignment was corrected to & & |
414 | Begin date of assignment was corrected to & |
415 | End date of assignment was corrected to & |
416 | Business partner & was created with contract & |
417 | Error during creation |
418 | No more objects found for object & & with evaluation method & |
419 | Participants in participation & successfully determined |
420 | No constellation could be determined for participation & |
421 | No distribution categories defined for constellation & of participation & |
422 | Roles & and & both have the leading indicator set |
423 | Participation & does not have a leading role in constellation & |
424 | Contracts & & both have leading role & |
425 | Participation & has too many combinations from role & and contract type & |
426 | Partn & from comn case & was determined successfully - constellation=& |
427 | No active version is available for role & at time &, & |
428 | The agent may not act independently in role & |
429 | User & is not maintained as a business partner |
430 | Business partner & is not maintained in role 'commission clerk' |
431 | No authorization: User & is not maintained as a business partner |
432 | Enter the correct relationship between client and application |
433 | Enter the correct contract type '02' for commission application & |
434 | Enter current application |
435 | Execution error |
436 | Partner & & not in application & |
437 | Only business partner & with contract & is displayed |
438 | There are no commission contracts under the selected objects |
439 | Leading role & appears in participation & & |
440 | Participation &: Alt. ind. participant & has no indirect role category |
441 | & contract partners are entered as "managers" in position & |
442 | Only business partner & with contract & is changed |
443 | Participation &: Direct participant & has no direct role category |
444 | Select one object only |
445 | Enter the source and target objects |
446 | Select as & an object of type & |
447 | Object & is already assigned to object & |
448 | Link may only start from & |
449 | Delete old assignment |
450 | Assignment must finish before & |
451 | In interval & & contract & already has a staff assignment |
452 | Contract & not active at & (&) |
453 | No authorization: Business partner & is not maintained in role & |
454 | No authorization to maintain PD Org master data for object type "BP" |
455 | No entitlement categories maintained for bus. obj. & and bus. trans. & |
456 | Search method & not active in repository |
457 | Search method & could not be executed correctly |
458 | Participtn. &: Constellation & in std cont & for cont & not maintained |
459 | Participant & is not allowed in role & |
460 | Undescribed error when calling qualification management |
461 | Participation & (commission case &) is incorrect |
462 | New start date for link must be before the old start date |
463 | Start date must be on or after & |
464 | Error in DB update for contract & |
465 | Staff successfully assigned |
466 | Contract & is stopping commission case (obsolete) |
467 | Historical commission case &1/&2 is stopping current commission case |
468 | Business partner & does not exist in the required BP role |
469 | Commission case to wait for business trans. &1/&2 before rebundling |
470 | No authorization: No entry for business partner &1 and time-spot &2 |
471 | Contract period (&, &) and object period (&, &) are not the same |
472 | Position - org. unit; Period does not cover staff assignment period |
473 | Business partner ID &2 overwritten by commission contract partner &3 |
474 | Participation &: No contractual participation found for participant & |
475 | Contractual participation for commission contract & successfully found |
476 | Commn contr. &: Higher-level assignt of contractrual particp. not allowed |
477 | Commission contract & must not appear in role & |
478 | User & is not authorized to maintain contracts |
479 | &, not possible to reassign staff |
480 | *** Start of messages for participant relationships ********************* |
481 | Entitlement category &1 not allowed for business object type &2 |
482 | Entitlement category &1 cannot be processed |
483 | Contract &1 cannot be used for date &2 |
484 | New processing target &1 not allowed |
485 | New processing target &1 set |
486 | New processing target &1 not allowed |
487 | Contract could not be found |
488 | Contract &2 was found for business partner &1 |
489 | Contract &1 does not have performance-related remuneration agreements |
490 | Percentage not entered for share key |
491 | Staff reassignment not allowed from time of link start |
492 | New processing target &1 not allowed for reset |
495 | Participant &1/&2 already exists |
500 | *** Start of Messages for Authorizations ****************************** |
501 | You do not have processor authorization |
502 | You are not authorized to change & |
503 | You do not have posting authorization |
504 | You do not have authorization for application & |
505 | You do not have authorization for dual releases in application "&" |
506 | Error while contract brought forward; Object & only starts from & |
507 | Error during contract extension; Object & already ends on & |
508 | Staff assignment changes are saved actively |
509 | Enter a disbursement recipient |
510 | Disbursement recipient and commission contract partner must be the same |
511 | Error in check of quantifying authorizations |
600 | *** Start messages for pending log processing *********************** |
601 | Pending cases log entry &1 could not be written |
602 | Pending cases log contains no data on application & |
603 | Application & unknown |
604 | Application & ist operational - DATA WILL BE DELETED |
605 | You are not authorized for this action |
606 | WARNING: ALL transaction data will be deleted from the tables |
607 | Application & is operational - deletion not possible |
608 | Application & being used productively; This action is not possible |
609 | Application & is a kernel and can therefore not be changed |
621 | Error in Raising Workflow |
622 | No approver found for agent |
650 | Table &: & records deleted |
651 | Table & not found |
652 | Number range & was initialized |
653 | Number range & could not be found & |
654 | Number range & would be initialized with an operative run |
655 | Table &: & records found |
656 | Table &: & versions deleted, & versions renumbered |
657 | Table &: Techn. error: "version" not last key field |
658 | Table & is not versioned |
659 | Table &: & versions for deletion, & versions for renumbering |
660 | Program started to delete sample data *** & *** |
661 | Table CACS_CTRTSTI: Contract &: & records version & deleted |
662 | Table CACS_CONTR: Standard contract & deleted |
663 | Table CACS_CTRTSTI: Contract &: & record version & for deletion |
664 | Table CACS_CONTR: Standard contract & for deletion |
665 | Table &: Event &: & versions for deletion |
666 | Error whilst accessing table & |
667 | Table &: Event &: & versions deleted |
668 | Table TCACS_PERIOD: Period rule &: & records version & deleted |
669 | Table TCACS_PERIOD: Period rule &: & records version & for deletion |
670 | PD-ORG - Contract links: &1 deleted; &2 incorrect |
671 | PD-ORG - Contract links: &1 for deletion; &2 incorrect |
672 | PD-ORG - Contract links: &1 deleted |
673 | PD-ORG - Contract links: &1 to be deleted |
674 | Report &1 deleted |
675 | Error occurred while deleting report &1 |
676 | Report &1 to be deleted |
677 | Table TCACS_PERIODRULE: see Note 716355 |
699 | *** End of messages for pending log processing ************************* |
701 | Incorrect higher-level object type &3 for subobject &1/&2 |
702 | Unknown subobject type &1 |
703 | &1/&2: Ext.ID for superior subobj. missing; no determination possible |
750 | Remuneration type &1 expects amounts for differing commissions (line &2) |
751 | Remun.type &1 expects quantities for differing commissions (line &2) |
752 | Unexpected error during processing of differing commissions |
800 | *********Messages for SAMPLE Modules************************************* |
801 | Identical constellation for several participants |
802 | Successful run of user exit [APPL]_SAMPLE_PRC_1001 |
803 | Unsuccessful run of log handling |
850 | ***** Remuneration Inquiry ***** |
851 | Last data screen reached |
852 | First data screen reached |
853 | Enter commission contract, document ID or settlement schedule |
854 | Specify year and number of settlement schedule |
855 | Enter commission contract, document ID or settlement schedule |
856 | Remuneration type is invalid |
857 | The called function &1 does not exist |
858 | No documents for this selection |
859 | Enter business partner ID or contract number |
860 | Document ID incomplete or remuneration document does not exist |
861 | Select at least one remuneration item |
862 | Document identification is incomplete -> Impossible to navigate |
863 | Error during determination of installed packages for application &1 |
864 | Enter a business object category and a business object ID |
865 | No remuneration documents exist |
866 | No commission contracts found matching selection criteria |
867 | Only invalid remunerations exist for the selection |
868 | No commission contracts found for business partner &1 |
869 | No business partner found for user &1 |
870 | Error in determination of periods in function module &1 |
871 | No business object categories found for application &1 |
872 | Calculation of potential entitlements ended with errors |
873 | Simulation of target agreements requires a unique posting date |
874 | Contract partner &2 is not the owner of contract &1 in application &3 |
875 | Error during data enrichment |
876 | Enter a contract number in the personalization data |
877 | Analysis period was limited to five years |
880 | Log start: &1 &2 |
881 | End of log: &1&2 |
890 | Missing authorization for user &1 for RFC (Module: &2) |