CE - CAPP messages
The following messages are stored in message class CE: CAPP messages.
It is part of development package CEV in software component PP-BD-CAP. This development package consists of objects that can be grouped under "R/3 Applic. development: PPS CAPP standard times calculation".
It is part of development package CEV in software component PP-BD-CAP. This development package consists of objects that can be grouped under "R/3 Applic. development: PPS CAPP standard times calculation".
Message Nr ▲ | Message Text |
|---|---|
| 000 | -------- Messages for calculation of standard values, formulas --------- |
| 001 | Cannot start transaction &1 |
| 002 | Enter a formula name |
| 003 | Enter a table as origin for the characteristic |
| 004 | Check your entries |
| 005 | Formula contains more & than & |
| 006 | Do not use the character "&" in formulas |
| 007 | With single quotes, always enter beginning and ending quotes |
| 012 | Missing entry |
| 013 | Do not enter an origin with origin key "&" |
| 014 | Enter at least one characteristic in the formula |
| 015 | Characteristic & does not exist |
| 016 | Formula & does not exist |
| 017 | Formula & becomes recursive: It is referred to in formula & |
| 019 | The format of characteristic & is not numeric |
| 020 | Table field &-& is defined as & |
| 021 | Characteristic & has more than & characters |
| 022 | & & was not saved since the formula has not yet been entered |
| 036 | Characteristic & does not exist |
| 037 | Characteristic & is not assigned to a table |
| 038 | Line break not possible in this formula line |
| 039 | The subsequent line does not fit into this line |
| 040 | The formula lines are full: Insertion not possible |
| 041 | The cursor is not on a formula line |
| 042 | Enter formula name |
| 043 | Formula & causes recursiveness |
| 046 | Do not enter characteristics with more than & characters in formulas |
| 047 | Only use backets where necessary |
| 070 | *------- Methods -------------------------------------------------------- |
| 071 | Enter the formula or method to be used to create the method |
| 072 | Enter either a formula or a method in the second screen section |
| 073 | Maximum number of levels has been reached |
| 074 | Multiple use of characteristics |
| 076 | Method is recursive: Basic formula & refers to itself |
| 077 | The value type and unit of method & have different dimensions |
| 078 | Enter the name of the method |
| 079 | Method & does not exist |
| 081 | The method is locked by user & |
| 082 | Choose the database to be accessed |
| 083 | No default value exists for characteristic "&" |
| 084 | There is no origin which could be deleted |
| 085 | Maintain the basic data for method & |
| 086 | You should maintain a database as origin |
| 087 | Data for characteristic & is taken from & |
| 088 | Rule for characteristic & is changed from & to & |
| 089 | Data is taken from &; no change of rule possible |
| 100 | *------- Generation of table accesses ----------------------------------- |
| 101 | The generation report & does not exist |
| 102 | Error when saving generation report & |
| 103 | The generation of table accesses is restricted to & key fields |
| 104 | *------- Maintaining rules ---------------------------------------------- |
| 105 | Select a rule type |
| 106 | Select only one rule type |
| 107 | Characteristic & has no & |
| 108 | You should only enter search rules when accessing tables |
| 109 | Assign to characteristic & a field from Table & |
| 110 | Enter the table to be used for conversion |
| 111 | Table & cannot be used for conversion |
| 113 | The rule for characteristic & has been marked for deletion |
| 114 | Conversion rule and origin from table lead to inconsistency |
| 115 | You should maintain a different origin |
| 130 | *------- Use of the rules ----------------------------------------------- |
| 131 | Method &: No entry has been found in the conversion table & |
| 132 | Characteristic &: Value & could not be converted |
| 133 | Characteristic &: Value & is not & |
| 150 | *------- Where-used lists/explosion ------------------------------------- |
| 151 | Enter only one CAPP element |
| 152 | & & has no usage in & |
| 154 | Specify a CAPP element |
| 155 | Select a CAPP element |
| 156 | The method becomes recursive if you specify this origin |
| 157 | Characteristic & is also contained in origin & & |
| 200 | *------- Process -------------------------------------------------------- |
| 201 | Enter a method |
| 202 | This method is already allocated to the process |
| 203 | Position the cursor on a method line |
| 204 | So far, no method has been allocated to process & |
| 205 | No method has been marked for automatic selection |
| 206 | Enter a process text |
| 207 | Assign the methods first |
| 208 | No process text exists for & & |
| 209 | A text already existed: The text has been changed |
| 210 | No new process text has been generated |
| 211 | The process text has been generated |
| 212 | Process & does not exist |
| 214 | Deletion not possible: & is still used in the routing |
| 215 | Enter the name of the process |
| 250 | *------- Work center/technical data-------------------------------------- |
| 251 | Enter a process |
| 252 | This process is already allocated to the work center |
| 253 | Position the cursor on a process line |
| 254 | Allocate at least one process to the work center |
| 255 | You have not marked a process for automatic selection |
| 256 | First select your entries |
| 257 | Process & and work center & are still used in operations |
| 258 | One or more processes are still used in task lists |
| 259 | Work center & has no technical data |
| 260 | Delete the selected sub-calculations |
| 300 | *------ Calculation of standard times/simulation ------------------------ |
| 301 | There is no further sub-calc. data |
| 305 | There are no methods allocated to work center & or process & |
| 308 | Process & is not allocated to work center & |
| 309 | Method & is not allocated to process & |
| 310 | Method & is not allocated to work center & |
| 311 | Enter a process for the method |
| 312 | Work center &: No processes for automatically calculation exist |
| 313 | Work center &: No methods exist for automatic calculation |
| 314 | So far, no process has been assigned to work center & |
| 315 | So far, no method has been allocated to work center & |
| 316 | Allocate methods to process & first |
| 317 | Select at least one method for process & |
| 318 | * W-, I-, S-messages when calling up the simulation |
| 319 | Automatic selection of a process is not possible for work center & |
| 320 | Automatic selection of a method is not possible for process & |
| 321 | Select at least one process |
| 322 | Select at least one method |
| 323 | No further sub-calculation numbers exist for this operation |
| 324 | Process & completed; continue with process & |
| 326 | The last selected process & has been completed |
| 327 | Method & has been calculated; continue with method & |
| 328 | The last selected method & has been processed |
| 329 | No standard values have been calculated for operation & using CAPP |
| 330 | Complete your entries |
| 331 | Select at least one sub-calculation |
| 332 | You have reached the first selected sub-calculation |
| 333 | You have reached the last selected sub-calculation |
| 334 | Select at least one characteristic |
| 335 | You have reached the first selected characteristic |
| 336 | You have reached the last selected characteristic |
| 337 | To calculate std. values via CAPP, enter a work center in the op./sub-op. |
| 338 | The aut. calculation of std. values for this operation has been cancelled |
| 339 | CAPP data already exists for this operation |
| 340 | You should maintain the CAPP flow control for plant & |
| 341 | No standard values have been defined for work center & |
| 342 | Conversion from unit & to unit & is not possible |
| 343 | There is no bill of materials for this material |
| 344 | Material "&" does not exist |
| 345 | Method &: No entry was found in Table & |
| 346 | At present there is no log |
| 347 | Specify a plant |
| 348 | Enter a work center |
| 349 | For process & --------------------------------- |
| 350 | End of simulation |
| 351 | Problems when calculating using method &; check log |
| 352 | The calculation using method & was cancelled |
| 353 | Enter a value for each characteristic |
| 354 | Method & has another parameter ID than work center & |
| 355 | Method &: For work center &, you may not maintain std. value & |
| 356 | Method &: For wor.cntr. &, std. value & should not be maintained |
| 357 | Meth. & and the operation have base quantities with diff. dimensions |
| 358 | Method &: Table & cannot be accessed |
| 359 | Work center & is marked for deletion |
| 360 | Work center & is locked |
| 361 | Method &: Base quantity & is not equal to 1 |
| 362 | Method &: Value type & cannot be used with task list type "&" |
| 363 | Method & with value type & cannot be used with usage & |
| 364 | The system determined the number of executions for method & |
| 365 | No costing for task list type: & Task list: & Operation & for CAPP online |
| 380 | * For accessing BOM |
| 382 | You should select one or more items in the master data |
| 383 | There is a separate function for accessing table "&" |
| 384 | Table & is not suitable as origin |
| 385 | Table & not in customer name range, but already used in stand.val.calc. |
| 400 | *------ Time component menu --------------------------------------------- |
| 401 | No value components exist for menu & & |
| 402 | Enter a multiplier for divisor "&" |
| 403 | Value type & is still used in methods |
| 404 | Machine type & is still used in work centers |
| 405 | The rounding and add. values key & is still used in work centers |
| 406 | The rounding and add. values key & is still used in routings |
| 407 | The rounding and add.values key & is still used in another table |
| 408 | The planner group & is still being used |
| 409 | The sort string & is still being used |
| 450 | *------ Maintain customizing tables ------------------------------------- |
| 451 | The first value is missing |
| 452 | Sort the values in ascending order |
| 454 | Table & does not exist |
| 456 | Enter rounding type, rounding increment and unit |
| 457 | & is not a time unit |
| 459 | You do not have an authorization for plant & |
| 460 | Enter either relevant or non-relevant item categories |
| 461 | Enter at least one item category |
| 462 | Enter rounding type, rounding increment and unit |
| 464 | Enter different value ranges for rounding within a rounding cat. |
| 465 | Only use qty. units with the same dimension in rounding cat. & |
| 467 | Enter a value |
| 468 | Sort the value ranges per rounding category in ascending order |
| 471 | Fill in this field for time components in menus |
| 474 | Only use quantity units with the same dimension in menu & |
| 475 | This line has not been selected for text generation |
| 477 | Only use a rounding category with an appropriate dimension |
| 478 | Only use letters, numbers or "-" in this field |
| 479 | Do not use parameter IDs with the origin "&" |
| 499 | *----- General error messages for CAPP ---------------------------------- |
| 500 | & & already exists |
| 501 | & & does not exist |
| 502 | & & is not released |
| 503 | Enter a table name |
| 504 | Table & does not exist |
| 505 | Table & has no fields |
| 506 | & & has not been changed |
| 507 | Save not possible because & & contains inactive elements |
| 508 | You should not select a key field for the field assignment |
| 509 | You should assign a field from table & to characteristic & |
| 511 | & & has been created |
| 512 | & & has been saved |
| 513 | & & has been deleted |
| 514 | & & is locked by user & |
| 515 | & & is locked (being processed by another user) |
| 516 | & & has "inactive" status |
| 517 | & |
| 518 | Position the cursor on a characteristic line |
| 519 | Programm error: & & & |
| 520 | Method &: Method result caused overflow |
| 521 | Method &, formula &: Division by zero |
| 522 | Method &, formula &: Error when calculating a power |
| 523 | Standard value & caused overflow |
| 524 | Method & formula &: Error when calculating a logarithm |
| 525 | Operation & caused overflow |
| 526 | Method &, formula &: Error when taking a root |
| 527 | & is used in & &. Changes only possible to limited extent |
| 528 | & is used in & &. Deletion not possible |
| 529 | & is used & times. Changes only poss. to limited extent |
| 530 | & is used & times. Deletion not possible |
| 531 | Select one option |
| 532 | & & contains signs that are not permitted |
| 536 | Enter a value which is greater than or equal to zero |
| 537 | Enter a menu name |
| 538 | Menu & does not exist |
| 539 | No menu lines exist for menu & |
| 540 | No menu components exist for menu & |
| 541 | All CAPP elements for work center & are consistent |
| 542 | Formula & (in method &) is not released yet |
| 544 | Method &, formula &: Error in calculation |
| 545 | Operation &, sub-operation & caused overflow |
| 546 | Enter a description |
| 547 | No documentation exists for & & |
| 548 | Internal error calling SAPscript |
| 549 | System error in accessing characteristic data |
| 550 | Characteristic "&" has no origin |
| 551 | You should maintain a table as origin |
| 552 | Origin & is not & |
| 553 | The system expects you to enter a closing bracket or an operator |
| 554 | Correct the syntax error in the formula |
| 555 | Place the cursor on a line which may be selected. |
| 556 | Internal error in number assignment |
| 557 | Number assignment: numbers are in critical area |
| 558 | Number assignment: The last number has been assigned. |
| 559 | Origin & is not a genuine CAPP table |
| 560 | Table names of more than 10 characters are not permitted |
| 561 | BOM & alternative & application & was selected for material & |
| 562 | &1 material &2 routing &3 operation &4 |
| 600 | *------- Messages for routing generation -------------------------------- |