CM_EHFND_COMN - Commonly Used Messages
The following messages are stored in message class CM_EHFND_COMN: Commonly Used Messages.
It is part of development package EHFND_COMN in software component EHS-SUS-FND. This development package consists of objects that can be grouped under "Common objects for all components".
It is part of development package EHFND_COMN in software component EHS-SUS-FND. This development package consists of objects that can be grouped under "Common objects for all components".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Consistency check complete |
| 002 | You can define only one default value; check your entries |
| 003 | At least one row is required |
| 004 | Parent row not found |
| 005 | Problems with number range object &1; return code is &2 |
| 006 | Index is not allowed |
| 007 | Internal error; contact technical support |
| 008 | &1 "&2" does not exist |
| 009 | Unit field of &1 must be filled |
| 010 | &1 &2 does not exist for &3 &4 |
| 011 | Field "&1" is mandatory |
| 012 | Incorrect value for field &1 |
| 013 | &1 &2 does not exist |
| 014 | Object-based navigation is not configured; contact technical support |
| 015 | Object already exists in your favorites |
| 016 | Object added to your favorites |
| 017 | Object removed from your favorites |
| 018 | Group &1 does not exist for incident category &2 |
| 019 | Association "TO_ROOT" not found |
| 020 | No authorization for sending to the specified number of recipients |
| 021 | Document could not be sent to any recipient |
| 022 | No send authorization |
| 023 | Error occurred while sending |
| 024 | No search results found |
| 025 | E-mail not sent to &1 (party key: &2); enter an e-mail address or user |
| 026 | Cannot determine the exposure rating when OEL is zero |
| 027 | Value "&1" is not a valid time |
| 028 | E-mail not sent to &1; cannot create the recipient object (&2) |
| 029 | Unable to set the user &1 as sender of the request (&2) |
| 030 | E-mail not sent to &1; cannot add recipient to send request (&2) |
| 031 | Cannot attach the file &1 to e-mail (&2) |
| 032 | E-mail not sent because of problems in the send request (&1) |
| 033 | E-mail not sent because of problems during creation of the e-mail (&1) |
| 034 | Cannot attach the file &1 to e-mail |
| 035 | Parameter error during call of function module SO_DOCUMENT_SEND_API1 |
| 036 | Enqueue error in function module SO_DOCUMENT_SEND_API1 |
| 037 | Other error in function module SO_DOCUMENT_SEND_API1 occurred |
| 038 | Too many receivers specified in the e-mail |
| 039 | E-mail not sent |
| 040 | You are not authorized to send e-mails |
| 041 | Customizing value "&1" does not exist |
| 042 | Customizing value "&1" is still used in table "&2" |
| 043 | Object is still being used and cannot be deleted |
| 044 | Regulation &1 does not exist |
| 045 | &1 &2 is not unique |
| 046 | You can define only one required value; check your entries |
| 047 | Regulation &1 is not unique |
| 048 | Regulatory list &1 is not unique |
| 049 | "&2" is no valid "&1" |
| 050 | Exception details: &1 &2 &3 &4 |
| 051 | Description "&1" already exists |
| 052 | Prerequisites for PM integration are not fulfilled |
| 053 | &1&2&3&4 |
| 054 | Country/region &1 does not exist. |
| 055 | Activation for risk assessment type "&1" without agents not allowed |
| 056 | Cannot save data; &2 is not a valid &1 |
| 057 | Code &1 is already in use; enter another code |
| 058 | Country/region &1 is already assigned. |
| 060 | Value &1 is not in the external number range interval |
| 061 | Due date cannot be in the past |
| 062 | GDT_CODE already exists - &1 |
| 063 | Number range interval "&1: &2" does not exist |
| 064 | Cannot navigate to selected object |
| 065 | Cannot navigate to selected risk |
| 066 | Cannot navigate to selected assessment step |
| 067 | Cannot navigate to selected control |
| 068 | Cannot navigate to selected amount |
| 070 | Value &1 is not a valid number |
| 071 | No &1 assigned. |
| 072 | Errors occurred; see application log with object &1 and subobject &2 |
| 073 | Warnings occurred; see application log with object &1 and subobject &2 |
| 074 | Data transfer finished |
| 075 | Object cannot be modified, since locked by &1 |
| 076 | Too many entries with &1 &2 to be displayed in a list |
| 077 | Too many persons with position "&1" to be displayed in a list |
| 078 | Description "&1" is duplicated in the system setup. |
| 080 | Last selected requirement is already assigned to the specified scenario |
| 081 | &1 selected requirements were assigned to the specified scenario already |
| 082 | Number range &1: Number range status adjusted to�&2 |
| 083 | Number range &1: Error reading ID from DB table &2; check table entries |
| 084 | Number range &1: '&2' is no integer value ; check DB table &3 |
| 085 | Number range &1: Set number range status to�&2 |
| 086 | Number range &1: Number range status &2 is set correctly |
| 087 | Number range &1: Create number range interval &3 with status &2� |
| 088 | Number range &1: Error reading key for BO '&2'; check table EHFND_BO |
| 089 | Number range &1: Error reading configuration for BO '&2'; check BO |
| 090 | Internal program error; see longtext |
| 091 | Save your entries before entering other settings |
| 092 | Number range &1: Error adjusting number range interval to &2 |
| 100 | No key was passed to the application. |
| 101 | Passed key contains invalid characters |
| 102 | You are not authorized to receive the requested resource |
| 103 | Cannot find requested file |
| 104 | Cannot store file &1 |
| 105 | File cannot be received due to unknown reason |
| 106 | Passed key is invalid |
| 107 | Cannot add the file to the storage |
| 108 | Error occured while creating cleanup job |
| 109 | Error occured while submitting cleanup job |
| 110 | Error occurred while closing cleanup job creation |
| 111 | "From date" must be before "end date" |
| 112 | Internal error (conversion function) &1 &2 &3 &4 |
| 113 | Enter a valid e-mail address |
| 114 | Cannot send e-mail; enter an e-mail address |
| 115 | Cannot change data; data is locked by another user |
| 116 | Enter a description in at least one language |
| 117 | You cannot delete statement &1; statement is still used |
| 118 | Statement &1 deleted |
| 119 | To merge the listed statements, select the statement you want to merge to |
| 120 | Statements merged |
| 121 | Statement is used; any changes affect related objects |
| 122 | You have selected obsolete statements |
| 123 | Cannot navigate to object |
| 124 | Existing entry with same chemical and method of use will be overwritten |
| 125 | Search operator &1 is not supported for criteria &2 |
| 126 | Cannot merge statements; select at least two statements |
| 127 | A listed substance with the CAS number &1 already exists |
| 128 | Description cannot be longer than &1 characters |
| 129 | Cannot save remark "&1" while "Value" field is empty |
| 130 | Maximum number of results is &1 |
| 131 | Value must be greater than or equal to 1 |
| 132 | Attachment folder initialized |
| 133 | You cannot delete statement "&1". The statement is owned by SAP |
| 134 | You cannot edit a statement owned by SAP. |
| 135 | You cannot merge statement &1; statement is owned by SAP |
| 150 | &1: No unit found for the amount category |
| 151 | &1: Operator "&2" not valid |
| 152 | &1: Unit "&2" not valid |
| 153 | &1: Enter a unit of measurement |
| 154 | Operator for &1 not allowed |
| 155 | &1: Lower value must be smaller than upper value |
| 156 | &1: Use of operator "&2" invalid |
| 157 | &1: "&2" is not a valid format |
| 158 | &1: Entering a range is not permitted |
| 159 | &1: Enter an operator |
| 160 | &1: Enter a value |
| 161 | &1: Incorrect use of operators |
| 162 | &1: Negative value not permitted for dimension &2 |
| 163 | &1: Entering an operator is not permitted |
| 164 | &1: Enter the same unit as for the initial flow |
| 165 | Specify at least one search criterion |
| 166 | Error "&1" |
| 167 | Select at least one row |
| 168 | Feature not supported |
| 169 | You are not authorized to delete documents |
| 170 | You are not authorized to add documents |
| 171 | Option is temporarily not available |
| 172 | Check of dimensions is complete |
| 173 | "&1" is not a valid language key; select a valid language key |
| 174 | Only one "&1" text can be imported in language "&2" for "&3". |
| 175 | Only one "&1" text can be imported in language "&2" for "&3", key "&4". |
| 176 | Enter "&1" text in language "&2" for "&3". |
| 177 | Enter "&1" text in language "&2" for "&3", key "&4". |
| 178 | Add translations for "&1" texts in a language other than "&2" for "&3". |
| 179 | Multiple "&1" entries exist for "&2". Enter "&3" key for language "&4". |
| 180 | No business partner assigned to system user "&1" |
| 182 | Business partner "&1" type organization does not exist |
| 183 | Multiple "&1" entries for "&2". Specify "&3" keys for all entries. |
| 184 | Business user for business partner "&1" does not exist. |
| 185 | Business partner with name "&1" is not unique. Enter business partner ID. |
| 186 | Business partner "&1" with the name "&2" has the name "&3" in the system. |
| 187 | No email address for user "&1" found in the system |
| 200 | &1 records processed successfully in client &2 |
| 201 | &1 records processed successfully in all clients |
| 210 | &1 is not unique; use the search help |
| 211 | Sorry, free-text search is not supported; use the search help instead |
| 217 | Start date cannot be in the future |
| 220 | BO instance &1 does not have an attachment. |
| 221 | Object key &1 does not exist in &2. |
| 222 | BO instance &1 has already a draft ATS. |
| 223 | Object-based navigation &1 with operation &2 is not configured. |