CNV20201 -
The following messages are stored in message class CNV20201: .
It is part of development package CNV_20201 in software component CA-DT-CNV. This development package consists of objects that can be grouped under "Company code merge - basis".
It is part of development package CNV_20201 in software component CA-DT-CNV. This development package consists of objects that can be grouped under "Company code merge - basis".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ------------------------------------------------------------------------- |
| 001 | Value &1 (to be converted) for FIAA-BELNR does not have number range No. |
| 002 | No conversion routine available for subobject of object &1 |
| 003 | Error in shift routine! &1,&2,&3,&4 |
| 004 | Format error! Number = &1 is too long! (> &2) |
| 005 | Number range simulation: limited to fiscal years <= &1 |
| 006 | Number range simulation: For object &1 |
| 007 | Error when calling func. module CNV_00001_DESCRIBE_FIELD for field = &1 |
| 008 | Number range simulation: Limited to fiscal year &1 |
| 009 | Number range simulation: Memory optimization is switched on |
| 010 | ANLAGENNR: No analysis of number range mapping is done |
| 011 | Target number range missing: &1, &2, &3, &4 |
| 012 | Target number range with same toyear missing: &1, &2, &3, &4 |
| 013 | &1: Target number range was added: &2,FromNo=&3,ToNo=&4 |
| 014 | Only previously saved data gets downloaded |
| 015 | Year-dependent NoRg obj. without valid year as param.: &1 &2 &3 &4 |
| 016 | &1,&2,&3,&4 : new number level in CNV_20201_NRIV_O transferred from NRIV |
| 017 | __No.level(old) = &1, No.level(new) = &2 |
| 018 | Routine CNV_20201_BUILD_OBJ_SUBOBJ is not meant for prog. &!! |
| 019 | Number level for & is not in NRIV (CNV_20201_NROBJ-ACTIVE = N) |
| 020 | Object &1, target subobject &2: |
| 021 | CNV_20201_NRIV_O and NRIV inconsistent: Subobj &1, NoRg &1, To-year &3 |
| 022 | CNV_20201_NRIV_O update for &1, NoRg &2, To-year &3, ext.Index=&4: |
| 023 | __No. range: (old)=&1,(new)=&2 |
| 024 | Max. No. for & cannot be determined! |
| 025 | Offset update: Subobj &1, NoRg &2, To-year= &3, Extind= &4 |
| 026 | &1: Offset update: (old)=&2,(new)=&3 |
| 027 | Error when calculating offsets for &1,NoRg &2,Subobj. &3!! => long text! |
| 028 | Offset values for &1 with &2 &3 were updated |
| 029 | No conversion-relevant number ranges found |
| 030 | Error calculating offset for &1,NoRg &2,To-year &3,Subobj. &4!=>long text |
| 031 | Found no. level is lower! Subobj &1,NoRg &2,To-year &3, extern.= &4: |
| 032 | &1: max. value(&2)=&3 < NRIV no. level=&4 |
| 033 | Search term not found |
| 034 | Domain length &1 is not provided for in routine CNV_20201_CONVERT!! |
| 035 | Changes for & were saved in table CNV_20201_NRIV_O! |
| 036 | Offset update: Subobj &1, NoRg &2, Extind= &3 |
| 037 | Found no. level is lower! Subobj &1,NoRg &2, extern.= &3: |
| 038 | &1: No master table - NRIV number level is used for offset calculation |
| 039 | Asset company code & not found in T093C! No. level cannot be determined |
| 040 | Max. no. for object & cannot be determined! |
| 041 | &1, Subobj &2, NoRg &3, to-year &4 in CNV_20201_NRIV_N, but not in NRIV |
| 042 | NRIV update: Obj. &1, Subobj. &2, NoRg &3, To-year &4 |
| 043 | __No. level: (before)=&1,(after)=&2 |
| 044 | __From-no.: (before)=&1,(after)=&2 |
| 045 | __To-No.: (before)=&1,(after)=&2 |
| 046 | No conversion-relevant number ranges found |
| 047 | Prefix delimit. cannot be added; prefix is too long |
| 048 | All entries for & from CNV_20201_NRIV_O and CNV_20201_NRIV_N were deleted |
| 049 | Prefix delimit. not allowed here |
| 050 | &1 &2 &3: Lower limit &4 < than all lower limits in NRIV! |
| 051 | &1 &2 &3: Upper limit &4 > than all upper limits in NRIV! |
| 052 | &1 &2 &3 &4: Lower limit < and upper limit > than all limits in NRIV! |
| 053 | Number levels for & are determined via the respective value table |
| 054 | Old mapping for package &1 and domain &2 was deleted from CNVRENAME. |
| 055 | Mapping table was maintained incorrectly for: &1, &2, &3, &4 |
| 056 | Range limits in NRIV were updated by CNV_20201_NRIV_N |
| 057 | Subobject not available! (&1,&2,&3) could not be converted |
| 058 | The following errors occurred: |
| 059 | The following warnings occurred: |
| 060 | The rule is not maintained completely |
| 061 | Rule for non-participating subobject |
| 062 | According to CNV_20201_NRIV_O, &1 is not relevant for this package |
| 063 | Acc. to CNV_20201_NRIV_A, &1 is not conversion-relevant for this package |
| 064 | Target value &1 of individual rule is used more than once |
| 065 | Conflict with &1 rule &2. |
| 066 | Overlap of N rule &1 and R rule &2 |
| 067 | Overlap: [&1,&2] <=> [&3,&4] |
| 068 | Format error! Number = &1 has wrong data format! (&2) |
| 069 | For &, no offsets are calculated because NRIV rename is inactive |
| 070 | &1 &2 &3 &4 not found in NRIV |
| 071 | Conflict wit R rule &1, &2, interval &3 - &4! |
| 072 | Lower limit &1 is higher than upper limit &2 |
| 073 | Entry &1 &2 already exists |
| 074 | Overlap with following rule: |
| 075 | Entry for object &1 missing in CNV_20201_NR_OBJ !! Error!! |
| 076 | Value too high. Enter NRIV object &1 with max. &2 characters. |
| 077 | Active phase & <> R => display mode |
| 078 | Asset no.,&1,&2: No.level in ANLA =&3 > No.level in ANLH =&4 |
| 079 | &1: No fiscal year variant for subobject &2 |
| 080 | &1: No fiscal year is available for subobject &2 and value &3 |
| 081 | Input error for number range number; only 01 and 02 are allowed |
| 082 | Errors occured; the activity terminates |
| 083 | Error with ref. indicator of subobjects for obj. &1, target subobj. &2 |
| 085 | &1,&2,&3,&4 is in NRIV, but missing in CNV_20201_NRIV_O !!! |
| 086 | &1,&2,&3,&4 is in CNV_20201_NRIV_O, but missing in NRIV !!! |
| 087 | Test run: Table NRIV is not modified |
| 088 | Update run: Table NRIV is modified |
| 089 | &1,&2,&3,&4: NRIV number level is used |
| 090 | Org. determination for target det. obj. &1 for number ranges activated |
| 091 | No inconsistencies were found! |
| 092 | &1,&2,&3: MaxNo=&4 not in target interval! |
| 093 | Entries for & are not transferred to CNV_20201_NRIV_O, CNV_20201_NRIV_N |
| 094 | Org. unit of type &1 with value &2 participates in the conversion |
| 095 | Field overflow with suffix rule was avoided!! e. g. for (&1,&2,&3) |
| 096 | Lower limit &1 is higher than upper limit &2 (for valid years) |
| 097 | Org. determination for target det. obj. &1 for number ranges deactivated |
| 100 | No row was selected |
| 101 | Object = & : |
| 104 | For &, information on master table has not been maintained! -> long text! |
| 105 | & is not maintained completely, but is in use! -> Long text! |
| 106 | & has not yet been taken into account, but is used! -> Long text! |
| 107 | ------------------------------------------------------------------------- |
| 108 | &1: &2 Number ranges were copied to table &3 |
| 109 | Error while calling function module & |
| 110 | &1: Number level was updated: &2: (old)=&3,(new)=&4 |
| 113 | &1: Indicator for shifting is switched off |
| 114 | & is not maintained completely, but is not in use |
| 115 | & has not yet been taken into account, but is not in use |
| 116 | &: no master table, but there are external number ranges |
| 117 | &: no master table; only internal number ranges |
| 118 | NRIV no. range unchanged: &1, subobj. &2, no. rg. &3, to-year &4 : |
| 119 | __No. level (old)=(new)=&1 |
| 120 | NRIV no. level unchanged: &1, subobj. &2, no. rg. &3 : |
| 121 | & not yet taken into account as length of a number range object! |
| 122 | Target number range interval changed! &1,subobj.=&2,Nr=&3,to-year=&4 |
| 123 | old from-no.=&1,new from-no.=&2,old to-no.=&3,new to-no.=&4 |
| 125 | Entry missing in NRIV!! (&1,&2,&3,&4) |
| 127 | &1,Subobj=&2: Problems may occur during number level calculation! |
| 130 | Predecessor program & was not finished correctly! |
| 150 | &1: No entry in table CNV_20201_NRIV_A |
| 151 | &1: Indicator for shifting is not set |
| 185 | There are T3*-object numbers which may contain company codes! |
| 186 | There are T7*-object numbers which may contain company codes! |
| 187 | Conversion routine CNV_20240_FMBELNR is not yet defined for table &! |
| 200 | Alphanumer. limits for &1,subobj. &2,NoRg &3! See long text! |
| 201 | Following tables for package &1 were initialized: &2 |
| 202 | & also depends on asset group! Is not transferred! => Long text! |
| 203 | & was not yet maintained completely! See long text! |
| 204 | & was not yet taken into account! See long text! |
| 205 | Alphanumer. limits for &1,subobj &2,NoRg &3,to-year &4! =>long text! |
| 206 | Table CNV_20201_NRIV_A initialized for package no. & |
| 208 | Table CNV_20201_NRIV_A filled for package no. &: |
| 209 | & may contain asset groups! Is not transferred! => long text! |
| 210 | & also depends on different org. units! Is not transferred! => Long text |
| 216 | &1: Shifting=&2, Tracking=&3, Accepting_Duplicate_Keys=&4 |
| 217 | Object & not active (number level not in NRIV) |
| 218 | Information for & not yet verified! Maintain table CNV_20201_NR_OBJ! |
| 243 | Number level is outside number range interval! (&1,&2,&3,&4) |
| 246 | without check whether each object is in a number range interval |
| 247 | (&1,&2,&3,&4) - For FIAA-BELNR are only number ranges 01 and 02 expected |
| 248 | Entry missing in CNV_20201_NRIV_N : &1,&2,&3,&4 |
| 249 | (FIAA-BELNR,&1,&2,&3): No. level was increased: &4 |
| 263 | Entry for 'Write tracking table' added in process-related control |
| 268 | &1 rule with New_number without asterisk! |
| 270 | 'Number range objects: Update offsets' has not yet been executed |
| 277 | &1 rule with format conflict (fill NUMC fields with numbers only) |
| 288 | Include number range &1: No=&2,subobj=&3 in NRIV! |
| 289 | Include number range &1: No=&2,subobj=&3,ToYear=&4 in NRIV! |
| 300 | &1, to-year dependent NoRg.&2, ref.subobj.&3 incomplete! => Long text! |
| 301 | Obj.=&1,subobj.=&2,NoRg=&3,to-year=&4 may have to be added in NRIV! |
| 305 | &4 non-numer. doc. numbers for doc. type &1, CoCd &2, fiscal year &3 |
| 306 | Ext. number range &1,subobj. &2: max. no.= &3 |
| 307 | Ext. number range &1,subobj. &2,to-year &3: max. no.= &4 |
| 308 | NRIV no. range lower than previous no.! NoRg. &1, subobj. &2, to-year &3 |
| 309 | __NRIV: No.range =&1, max. number in &2: &3 |
| 310 | Ext. and int. NoRg to be merged! Obj. &1,NoRg. &2,ref.subobj.&3 |
| 311 | Ext. and int. NoRgs to be merged! Obj. &1,NoRg &2,ref.subobj. &3,year &4 |
| 312 | Obj.=&1,subobj.=&3,NoRg=&2 may have to be added to NRIV => long text |
| 313 | &1,NoRg &2,year= &3 does not exist in ref.subobj. &4! => long text! |
| 314 | Target number range is too small! Obj. &1,subobj. &2,NoRg &3 |
| 315 | __Target interval size = &1, required size according to NRIV entries = &2 |
| 316 | Target number range is too small! Obj. &1,subobj. &2,NoRg &3,to-year &4 |
| 317 | Number level for &1, &2, &3 initialized in CNV_20201_NRIV_O |
| 318 | Number level for &1, &2, &3, &4 initialized in CNV_20201_NRIV_O |
| 319 | No number range found for &1,subobj. &2! |
| 320 | Ext. NoRg: Obj. &1,No. &2,to-year &3,source subobj. &4 |
| 321 | No number range found for &1,subobj. &2,fiscal year &3! |
| 322 | Another &1 numbers without number range for subobj. &2! |
| 323 | __lowest (doc.)No.= &1, highest (doc.)No.= &2 |
| 324 | &1: &2 relevant numbers in table &3 |
| 325 | No relevant external number ranges |
| 329 | NRIV No.level higher than previous no.! NoRg. &1, subobj. &2, to-year &3 |
| 330 | __NRIV: No.range =&1, max. number in &2: &3 |
| 331 | Error when reading NRIV 'active' indicator for object : & |
| 332 | Error while reading information for number range object &1 |
| 333 | Number range object &1 is inactive (CNV_20201_NR_OBJ-ACTIVE = N) |
| 334 | Number range object &1 is not yet sufficiently known!!! |
| 337 | CoCd &1 (not for conversion) belongs to acc. area &2 (for conversion) |
| 338 | CoCd &1 (not for convers.) belongs to org.unit &2 (dom.&3) (for convers.) |
| 340 | &1 &2 &3 &4 |
| 341 | Inconsistency in rule! Missing entries |
| 342 | Number range object is year-dependent: From-year is initial! |
| 343 | Number range object is year-dependent: To-year is initial! |
| 353 | Target number range is almost full! &1,subobj. &2,NoRg &3 |
| 354 | __Target interval size = &1, rel. No. level = &2 |
| 355 | Target number range is almost full! &1,subobj. &2,NoRg &3,to-year &4 |
| 383 | Incorrect rule! Mask rule instead of prefix rule. &1;&2;&3;&4 |
| 398 | Syntax error in dynamic sub-routine pool => Development Support |
| 399 | Generation error for dyn. sub-routine pool; memory problems => long text |
| 400 | Error during data transmission |
| 401 | Error during generation of dyn. sub-routine pool (SY-SUBRC=&) => DevSup |
| 414 | ANLAGENNR is tested in separate simulation program! |
| 416 | Duplicates: Target subobj. = &1, Target (doc.)No.= &2 |
| 417 | Overlap of number ranges for &1, target subobj. &2,to-year &3: |
| 418 | Overlap of number ranges: &1, target subobj./to-year=&2 |
| 419 | Possible overlap of number ranges: &1, target subobj.=&2 |
| 420 | Duplicates for &1: target value=&2 |
| 421 | &1,&2,&3: no associated number range found |
| 422 | Another &1 (doc.)Nos. without number range for &2! |
| 423 | Duplicates: &1, target subobj.=&2,target No.=&3 |
| 424 | Duplicates: &1,target CoCd=&2,target No.=&3 |
| 425 | &1,&2,&3,&4: no associated number range found |
| 426 | &1: No duplicates due to simul. conversion of table &2 |
| 427 | &1: No duplicates due to simul. conversion of table &3 in fiscal year &2 |
| 428 | Number of records inserted in &1 (incl. duplicates): &2 |
| 429 | Max. number (&) reached for logging of objects without number range |
| 430 | &1: No duplicates due to simul. conv. of table &3 in fiscal years <= &2 |
| 431 | Duplicates: FIAA-BELNR,NoRg=&1,target subobj=&2,target No=&3,fiscal yr=&4 |
| 432 | __Origin:Subobj1= &1,No1= &2,subobj2=&3,No2=&4 |
| 433 | __Origin:Subobj= &1,(doc.)No.= &2,fiscal year=) &3. |
| 434 | Asset &1 exists several times in target company code &2 !!! |
| 435 | __Origin:CoCd1=&1,No1=&2,CoCd2=&3,No2=&4 |
| 436 | &1: No duplicates during simul. conversion due to NRIV |
| 437 | &1: No duplicates during simul. conversion in fiscal year &2 due to NRIV |
| 438 | &1: No duplicates due to simul. conv. in fiscal years <= &2 due to NRIV |
| 440 | &1,&2: min./max. No.(oltd=&3, min./max. No(new)=&4 |
| 441 | Mapping for number range: original subobj. &1, NoRg &2, to-year &3 : |
| 442 | _min.No(old) = &1, max.No(old) = &2 |
| 443 | _min.No(new) = &1, max.No(new) = &2 |
| 445 | other NRIV tables in use |
| 450 | Renumberings are NOT logged |
| 451 | Only changed numbers are logged |
| 452 | All relevant renumberings are logged |
| 468 | &1: already entries existing for package no. &2 |
| 500 | No data was imported! Wrong file name or file is empty. |
| 501 | & data records were imported |
| 502 | File & could not be found! |
| 503 | Error occurred during upload! Check the format of file &! |
| 505 | No entries for package &1 in saved table of conversion rules |
| 506 | &1 data records were saved in file &2 |
| 507 | Error during download into file & |
| 510 | Data has been saved. |
| 511 | Select the required entry |
| 543 | No data was loaded! Possible reasons: EXCEL is opened or format error |
| 760 | Select start and end of block |
| 761 | Select end of block |
| 762 | More than two lines were selected; select start and end of block |
| 800 | Upload of table content has taken place |
| 850 | Activity terminated |
| 851 | No data records were found in &! |