CNVMBT - Messages for MBT/API/PCL
The following messages are stored in message class CNVMBT: Messages for MBT/API/PCL.
It is part of development package CNV_MBT_MAIN in software component CA-LT. This development package consists of objects that can be grouped under "Main components of PCL for SLO Products".
It is part of development package CNV_MBT_MAIN in software component CA-LT. This development package consists of objects that can be grouped under "Main components of PCL for SLO Products".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | Package &1 is not active |
| 002 | Logs are from a different application |
| 003 | No log found |
| 004 | Customer objects successfully copied to productive data |
| 005 | No domain rules are maintained for package &1 |
| 006 | Job &1 is scheduled successfully |
| 007 | More than one sender structure assigned to receiver structure &1 |
| 008 | Receiver structure &1 has no sender structure assigned |
| 009 | Field &1 is not in sender structure &2 |
| 010 | More fields found for parameter &1 in sender structure &2 |
| 011 | No field found for parameter &1 in sender structure &2 |
| 012 | Include &1 for rule &2 not found in CNVMBTINCL |
| 013 | No data includes (&1) could be assigned to rules (&2) |
| 014 | Include &1 does not exist in the central system |
| 015 | Rule &1 not found in include &2 |
| 016 | Structure of the form &1 in include &2 is not correct |
| 017 | Table & is a cluster table; no check for table contents is made |
| 018 | Table &1 is empty, No-Data-Flag set |
| 019 | Table &1 does not exist in the sender system |
| 020 | Table &1 has wrong table type &2 |
| 021 | Variant &1 for table analysis created |
| 022 | &1 records copied to table &2 |
| 023 | No substate information exists |
| 024 | Mass transfer ID &1 created and assigned to subproject &2 |
| 025 | No access plan ID was specified for package &1 |
| 026 | Program is running in expert mode |
| 027 | No authorization for expert mode |
| 028 | Expert mode not allowed, program must succeed once |
| 029 | Action canceled by user |
| 030 | Include &1 differs in PCL and central system |
| 031 | Include &1 was changed in central system since creation of subproject |
| 032 | Activity is still running in a remote system - log could not be shown |
| 033 | Search terminated in one system, no table assignment is possible |
| 034 | Project &1 is already defined in the central system |
| 035 | Subproject &1 is already defined in the central system |
| 036 | Package &1 synchronized into system &2 |
| 037 | Problems while synchronizing package &1 into system &2 |
| 038 | Project &1 synchronized into system &2 |
| 039 | Problems while synchronizing project &1 into system &2 |
| 040 | Subproject &1 synchronized into system &2 |
| 041 | Problems while synchronizing subproject &1 into system &2 |
| 042 | &1 tables are set to NO-DATA |
| 043 | &1 tables are set to NO-EXIST |
| 044 | Masstransfer-Id &1 is already defined in the DTL system |
| 045 | ERROR: Unknown error occured. The application will be restarted. |
| 046 | Definition of semaphores does not work (for details see monitor). |
| 047 | Data / Existence check terminated in one system |
| 048 | &1 migration objects are set to TRANSFER |
| 049 | &1 migration objects are set to NO TRANSFER |
| 050 | Accesplan ID &1 created and assigned to package &2 |
| 051 | At least one user need the admininstrator status in table cnvmbtusr. |
| 052 | Table &1 does not exist in the receiver system |
| 053 | Job has been restarted. See new subactivity to determine the state |
| 054 | No masstransfer ID specified for subproject &1 |
| 055 | Changes after defining convobject &1 will not be considered |
| 056 | Field &1-&2 has already a rule assigned and will not be overwritten |
| 057 | Job information not available for the selected job |
| 058 | No DMC read authorization (S_DMC_S_R) for user &1 in sender system |
| 059 | No DMC write authorization (S_DMC_S_R) for user &1 in receiver system |
| 060 | Saving of settings failed, see log via CNVMBTMON for more details |
| 061 | Data Load is not running, therefore no hold-up is possible |
| 062 | Hold-up is in process, see long text for further information |
| 063 | Problems during the synchronization of the FM-ID occured |
| 064 | Table &1 contains data in the receiver client &2 |
| 065 | Rule &1 is a global rule, all migration objects need to be redefined |
| 066 | No masstransfer ID specified for subproject |
| 067 | Package id not in allowed namespace. |
| 068 | Table &1 contains a not supported table key and could not be handled |
| 069 | Table &1 contains no data for the specified package number |
| 070 | Data Selection is not running, therefore no hold-up is possible |
| 071 | Too many tables with decimal fields, please choose generic key |
| 072 | Only aborted/failed executions are shown -> to change use filter settings |
| 073 | Generation of object(s) started, see monitor to get the progress |
| 074 | Rework-Job is still running, no changes allowed until it's finished |
| 075 | Rework-Job is still running, see monitor to get the progress |
| 076 | Changes saved successfully |
| 077 | Please save changes first before generating objects |
| 078 | No object is to be generated |
| 079 | Object &1 is not generated yet > Call troubleshooting to solve problem |
| 080 | Object &1 is not calculated/filled yet > Call troubleshooting to solve it |
| 081 | Object &1 is not loaded yet > Call troubleshooting to solve problem |
| 082 | All objects were loaded successfully |
| 083 | No object selected -> Please mark objects before |
| 084 | Table & is a pool table; no check for table contents is made |
| 085 | Table & is cross-client and therefore is set to NO_EXIST |
| 086 | &1 objects marked |
| 087 | Access key check succeeded |
| 088 | No valid license available |
| 089 | License only &1 days valid |
| 090 | RFC Destination &1 unlocked by user &2. |
| 091 | RFC Destination &1 locked by user &2. |
| 092 | User &1 has changed RFC Destination &2. |
| 093 | All objects are active |
| 094 | Settings saved successfully |
| 095 | Objects activated successfully |
| 096 | No connection to destination &1 |
| 097 | Access keys successfully saved |
| 098 | Access Key not valid for this function. |
| 099 | Troubleshooter successfully started, check monitor to track the progress |
| 100 | &1&2&3&4 |
| 101 | Destination to the central system is not created yet |
| 102 | Destination to the PCL system is not created yet |
| 103 | Destination to the sender system is not created yet |
| 104 | Destination to the receiver system is not created yet |
| 105 | A communication failure occured, please check next line |
| 106 | A system failure occured, please check next line |
| 107 | Connection from the sender to the PCL system does not work fine |
| 108 | Connection from the receiver to the PCL system does not work fine |
| 109 | Processing was canceled. |
| 110 | Password of &1 is initial. |
| 111 | Package &1 is not active in execution system |
| 112 | Could not change password of RFC Destination &1. |
| 113 | Destination &1 already exist |
| 114 | Could not determine project. |
| 115 | Huge execution history. |
| 116 | Destination &1 does not exist |
| 117 | Please enter a package description |
| 118 | No active package in the execution system |
| 119 | Package &1 not active in the execution system |
| 120 | Phase &1 is not active in the execution system -> Synchronize Package |
| 121 | Dependent package &1 does not exist in execution system |
| 122 | User-defined activity &1 could not be inserted |
| 123 | No destination to execution system found |
| 124 | RFC error in RFC destination &1 with message text &2. |
| 125 | Rule &1 was changed and will be redefined, check extended monitor |
| 126 | Active phase was changed from &1 to &2 |
| 127 | Settings with higher value will be reduced when saving the change |
| 128 | Transaction is already locked by another user |
| 129 | No Data Transfer Activity found in Package &1 |
| 130 | No ClientCopy-Profil specified |
| 131 | ClientCopy-Profil &1 does not exist |
| 132 | Activity &1 does not support the rerun functionality |
| 133 | Troubleshooting step &1 could not be started within phase &2 |
| 134 | Phase &1 of troubleshooting step &2 differs from active phase &3 |
| 135 | Stepguid not found for package &1 |
| 136 | Package &1 successfully deactivated |
| 137 | Call Extended Process Monitor to view subactivity status details |
| 138 | &1 Subactivities / Tasks have been completed successfully |
| 139 | &1 Tables have been converted successfully |
| 140 | Call Extended Monitor to get more detaileds about conversion tasks |
| 141 | Activity &1 is still running therefore package could not be completed |
| 142 | User &1 confirmed that the activity &2 is finished successful |
| 143 | User &1 set the status of activity &2 to not yet finished |
| 144 | Object &1 was changed but is already loaded and will not be redefined |
| 145 | Objects need to be regenerated (see longtext) |
| 146 | RFC-Destinations need to be synchronized again (see longtext) |
| 147 | Client-Copy profil &1 was chosen - settings saved successfully |
| 148 | Execution target does not support calling WebDynpro applications |
| 149 | WebDynpro application &1 does not exist in execution target |
| 150 | URL could not be generated to WebDynpro application |
| 151 | This transaction is obsolete (read longtext to discover new functions) |
| 152 | Manual status change performed by user &1 |
| 153 | The status of the activity was changed from '&1' to '&2' |
| 154 | Activity 'Check Status of Table' gets started now - check monitor |
| 155 | Log initialization failed |
| 156 | Writing log to database failed |
| 157 | Follow-Up-Phase is not allowed to be changed |
| 158 | No Meta Interface Variant assigned to object &1 |
| 159 | Maintenance of Meta Interface Variant raised an error |
| 160 | Notes not attented at this point. |
| 161 | Attachments not attendet at this point. |
| 162 | No free package number can be found in defined package number range |
| 163 | Defined package number range is invalid |
| 164 | Cluster Conversion activity not found in phase &1 |
| 165 | No object found to be reconverted |
| 166 | Object &1 restored - Object can now be reconverted |
| 167 | Auto restart not configured for activity &1 |
| 168 | Database updated failed |
| 169 | Activity start not possible |
| 170 | Error while reading data extract mode information |
| 171 | Issue in updating Block status for scrambling |
| 172 | Parameter to stop data transfer is reset |
| 180 | No message selected |
| 181 | No longtext available for selected message |
| 182 | Message &1 (&2x): &3 |
| 183 | Data checked successfully |
| 184 | &1 records checked successfully |
| 185 | Dependent package &1 does not exist in client &2 |
| 200 | New destination settings applied - check connection status |
| 201 | System Information checks completed. |
| 202 | System Information checks running... |
| 203 | Jobs Control checks completed. |
| 204 | Jobs Control checks running... |
| 205 | Semaphores Control checks completed. |
| 206 | Semaphores Control checks running... |
| 207 | |
| 208 | No destinations selected - Mark destinations that should be changed |
| 209 | Action canceled |
| 210 | RFC Destination checks running. |
| 211 | RFC Destination checks successfully completed . |
| 212 | Synchronization started .... |
| 213 | Synchronization not possible - internal error |
| 214 | No destination selected |
| 215 | More than one destination selected. Please mark only one destination. |
| 216 | Not all rfc destinations are ready for use. (see long text) |
| 217 | Not all criteria fulfilled to use destinations. |
| 220 | Definition of destination &1 is not complete. &2 is initial. |
| 221 | Definition of destination &1 incorrect - connection not possible |
| 222 | Login data for destination &1 incorrect - check user / password |
| 223 | Destinations already exists |
| 224 | Destination ID &1 does not exists. |
| 225 | Release lower than 700. Not necessary to change pwds with this program. |
| 226 | Table &1 has no entries for packid &2. |
| 227 | Table &1 has no entries for destination id &2. |
| 230 | Subproject &1 is already existing at destination &2 |
| 231 | Package &1 is already existing at destination &2 |
| 233 | Synchronization not possible due to errors in definition or connection |
| 234 | Synchronization not possible due to non sync. administrative data. |
| 235 | Sign &1 unknown. Only I and E as values allowed. |
| 250 | No authority to change rfc destination. |
| 251 | Function module RFC_READ_R3_DESTINATION send &1. |
| 252 | Destination ID &1 already exists. |
| 260 | Could not insert record into table &1 because entry already existed. |
| 300 | Selected node not found |
| 301 | Activity not found |
| 302 | Activity group successfully maintained |
| 303 | Activity group is initial,enter an activity group. |
| 304 | No text available |
| 305 | Select an existing activity group |
| 306 | Cannot expand the node |
| 307 | Selected item not found |
| 308 | Activity group successfully deleted |
| 309 | Activity group not found |
| 310 | Enter an activity group to delete |
| 311 | Same name is maintained for some other process type |
| 312 | Enter the description |
| 313 | No activity groups found under selected process type. |
| 314 | Please maintain the activities. |
| 315 | Activity group succesfully created |
| 316 | You do not have required authorizations to change |
| 317 | Press enter to see assignment of activities to Activity group |
| 318 | Activity group is not available. |
| 319 | Activity group & already exists. |
| 320 | Process type not found for the given scenario |
| 321 | Database access failed. |
| 322 | Deletion process failed. |
| 323 | No activity groups found |
| 324 | Assignment of activity is done in all the phases |
| 325 | No package selected |
| 326 | No package was loaded |
| 327 | Package could not be loaded - see log |
| 328 | RFC-User is not a dialog user |
| 329 | Parameter to stop data transfer is set |
| 331 | Error in writing/updating the parameter &1 |
| 368 | Migration Object &1 has been skipped from the transfer |
| 370 | Due to technical restrictions, monitor needs to be restarted |
| 371 | Subproject &1 still exist. |
| 372 | Package &1 is still active in subproject &2 |
| 373 | Subproject &1 has no packages |
| 374 | Expiration date for application logs couldn�t be calculated |
| 375 | Setting the expiration date failed in destination &1 |
| 435 | Package information inconsistent - missing subproj. or proj. assignment |
| 436 | Destinations of package &1 deactivated |
| 437 | Because of package deactivation RFC Management state set to warning |
| 438 | Unknown error during RFC call |