CNV_PE_CHECK - Check Framework messages for posting engine
The following messages are stored in message class CNV_PE_CHECK: Check Framework messages for posting engine.
It is part of development package CNV_PE_CHECK in software component CA-LT. This development package consists of objects that can be grouped under "PE: Check Classes (Check Framework)".
It is part of development package CNV_PE_CHECK in software component CA-LT. This development package consists of objects that can be grouped under "PE: Check Classes (Check Framework)".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | No relevant object keys found; profile execution not possible |
| 002 | For check details click link button to the right |
| 003 | RFC destination of area &1 erroneous |
| 004 | Post transfer method not present yet |
| 005 | Default configuration proposal not present yet |
| 006 | Selection object not present yet |
| 007 | Area not present yet |
| 008 | Transfer method &1 |
| 009 | Undo transfer method &1 |
| 010 | Configuration proposal not present yet |
| 011 | More than one default configuration proposal present |
| 012 | Status bundle not present yet |
| 013 | Worklist not generated yet |
| 014 | Transfer list not present yet |
| 015 | Worklist not present yet |
| 016 | Data object not present yet |
| 017 | Worklist not present yet |
| 018 | Transfer method not present yet |
| 019 | Project not present yet |
| 020 | No execution rule is maintained yet |
| 021 | Rule maintenance (&1) not complete for worklist item &2 |
| 022 | No worklist items for check available |
| 023 | Area &1 |
| 024 | Transformation &1 |
| 025 | Execution rule &1 |
| 026 | Error instantiating the transformation rule; see long text |
| 027 | Transformation rule &1 |
| 028 | &2 execution rule &1 does not exist |
| 029 | Area status without corresponding worklist status |
| 030 | Worklist item status without corresponding worklist status |
| 031 | Worklist item status without corresponding area status |
| 032 | Severity level must not be maintained for status ID &1 |
| 033 | Severity differs within severity level &1 |
| 034 | Usage type differs, see long text |
| 035 | Status with ID &1 missing |
| 036 | Area status without corresponding worklist item status |
| 037 | Execution rule &1 is not assigned to area &2 |
| 038 | Condition transformation rule &1 |
| 039 | Interface mapping for condition not present yet |
| 040 | Condition must not be maintained |
| 041 | Execution rule (&1) not completely maintained yet |
| 042 | Configuration proposal not yet maintained |
| 043 | Execution rule maintenance mode is not specified yet |
| 044 | Execution rule must not be maintained |
| 045 | Transformation rule not present yet |
| 046 | Final flag is not set yet |
| 047 | Post transfer method &1 is not yet assigned to execution rule |
| 048 | Transformation rule &1 has type condition |
| 049 | Table not yet generated |
| 050 | Table not yet generated for interface parameter &1 |
| 051 | Table &1 for parameter &2 does not exist in DDIC |
| 052 | Table &1 for parameter &2 is inactive in DDIC |
| 053 | Table &1 for parameter &2 is partly active in DDIC |
| 054 | Table &1 for parameter &2 does not exist in database |
| 055 | Table &1 for parameter &2 has status 'New' in DDIC |
| 056 | TRule is not valid for filter |
| 057 | Configuration class not present yet |
| 058 | Interface mapping not present yet |
| 059 | Configuration proposal &1 |
| 060 | Field &1 of interface does not exist in table &2 |
| 061 | Table &1 does not exist in DDIC |
| 062 | Table &1 is inactive in DDIC |
| 063 | Table &1 is partly active in DDIC |
| 064 | Table &1 does not exist in database |
| 065 | Table &1 has status 'New' in DDIC |
| 066 | Config class &1 is erroneous or does not exist |
| 067 | Undo transfer method &2 is assigned to post transfer method &1 |
| 068 | Either none or too many default undo transfer methods defined |
| 069 | Object or object name missing |
| 070 | Error for function &1 in RFC destination &2 |
| 071 | Interface not present yet |
| 072 | Interface missing for transfer method |
| 073 | CL_CNV_PE_TRFM_CONFIG_SUPER not defined as super class of TRFM config |
| 074 | Interface mapping &1 |
| 075 | Transformation rule &1 has no export parameter |
| 076 | Transformation rule has multiple export parameters |
| 077 | Check finished logically successful |
| 078 | Check not relevant |
| 079 | Status manager class &1 is erroneous or does not exist |
| 080 | No worklist field defined as receiver for the result of TRule &2 |
| 081 | No interface mapping exists for transformation rule &2 of rule &1 |
| 082 | TRule exp. param &1 and assigned WL field &2 have different type + length |
| 083 | TRule exp. param &1 and assigned WL field &2 have different type |
| 084 | TRule exp. param &1 and assigned WL field &2 have different length |
| 085 | No worklist field assigned to importing param &1 of TRule &4 |
| 086 | TRule imp. param &1 and assigned WL field &2 have different type + length |
| 087 | TRule imp. param &1 and assigned WL field &2 have different type |
| 088 | TRule imp. param &1 and assigned WL field &2 have different length |
| 089 | No worklist field assigned to importing param &1 of TRule &4 |
| 090 | Condition not maintained yet |
| 091 | Worklist must be adjusted including .DMINC table fields |
| 092 | &1 execution rule not allowed |
| 093 | <IF_CNV_PE_STATUS_MANAGER_STD> not implemented in status manager class |
| 094 | Field &1 of table &2 does not exist in interface |
| 095 | Transformation rule &1 has unallowed owner &3 |
| 096 | Code step &1 has error: &2 |
| 097 | Field &1 does not exist in worklist |
| 098 | Include &1 does not exist in &2 system |
| 099 | Include &1 is in inactive state |
| 100 | IF Parameter &1 not present in IF1 of the IF mapping |
| 101 | IF Parameter &1 not present in IF2 of the IF mapping |
| 102 | Interface mapping ID not present in structure mapping item of SMAP &1 |
| 103 | Transformation rule not present in structure mapping item of SMAP &1 |
| 104 | Transformation rule (ID: &1) in SMAP item of SMAP &2 does not exist |
| 105 | SMAP &2 (within the PMAP &1) is not contained in the IF_MAP at all |
| 106 | Transformation rule does not exist in parameter mapping &1 |
| 107 | SND parameter &2 of parameter mapping &1 does not exist in interface 1 |
| 108 | RCV parameter &2 of parameter mapping &1 does not exist in interface 2 |
| 109 | SND parameter &2 of parameter mapping &1 does not exist in interface 2 |
| 110 | RCV parameter &2 of parameter mapping &1 does not exist in interface 1 |
| 111 | Interface mapping &1 for SND_TO_TR |
| 112 | Interface mapping &1 for TR_TO_RCV |
| 113 | Interface mapping &3 for TRule &1 of structure mapping &2 |
| 114 | Sender parameter or fixed value missing for item in PMAPM &1 |
| 115 | Structural mapping checks |
| 116 | Structural mapping &1 |
| 117 | No structural mapping contained in interface mapping |
| 118 | Parameter mapping checks |
| 119 | Parameter mapping &1 |
| 120 | No parameter mapping contained in interface mapping |
| 121 | Interface 1 &1 is unequal to the required interface 1 &2 |
| 122 | Interface 2 &1 is unequal to the required interface 2 &2 |
| 123 | Primary relation must be flagged for at least one structural mapping item |
| 124 | Structure mapping &1 is inactive; no checks are executed |
| 125 | Structure mapping item &1 is inactive; no checks are executed |
| 126 | Order number &1 used several times for same parameter mapping combination |
| 127 | Receiver parameter &1 of structure mapping &2 is not structured |
| 128 | Sender parameter &1 of structure mapping &2 is not structured |
| 129 | Receiver parameter of structure mapping &1 does not exist |
| 130 | Sender parameter &1 of parameter mapping &2 is not structured |
| 131 | Type difference of sender- (&1) and receiver parameter (&2) |
| 132 | Parameter mapping item (&1, &2) is inactive; no checks are executed |
| 133 | No SMAP given, then also no sender parameter must exist in PMAP &1 |
| 134 | Sequence from must not be higher than sequence to in PMAP &1 |
| 135 | Sequence from is greater than max. card. of SMAP &1 for sender param &2 |
| 136 | Parameter mapping has no move items |
| 137 | Field &1 does not exist in worklist |
| 138 | The SMAPI sender parameter of PMAP &1 does not exist |
| 139 | Parameter mapping does not has &1 move items |
| 140 | Template param &1 of WL2 param &2 is no member of TRFM IF &3 |
| 141 | Parameter template reference check |
| 142 | Available parameters |
| 143 | Transformation rule &1 has warning or error |
| 144 | WL1 parameter &1 is not filled from corresponding param. of interface 1 |
| 145 | Check not required for interface mapping with interface 2 of type &1 |
| 146 | Worklist item &4 has different signs (+/-) in its currency fields |
| 147 | Worklist item &1 has only zeros in its amount fields |
| 148 | Worklist item &1 does not exist |
| 149 | Generation status |
| 150 | Function module WL2TRFMPOST not present yet |
| 151 | Function module WL2TRFMPOST not correctly generated yet |
| 152 | Interface for function module WL2TRFMPOST not present yet |
| 153 | Function module WL1WRITE010 not correctly generated yet |
| 154 | Function module WL1WRITE050 not correctly generated yet |
| 155 | Function module WL1VRASSIGN not correctly generated yet |
| 156 | Function group MAINFUGR not correctly generated yet |
| 157 | Interface for function module WL1WRITE010 not present yet |
| 158 | Interface for function module WL1WRITE050 not present yet |
| 159 | Function group MAINFUGR not present yet |
| 160 | Function module WL1WRITE010 not present yet |
| 161 | Function module WL1VRASSIGN not present yet |
| 162 | Function module WL1WRITE050 not present yet |
| 163 | Parameter not maintained yet |
| 164 | Condition parameter |
| 165 | Function module &1 correctly generated |
| 166 | Function module WL2WRITE10 not correctly generated yet |
| 167 | Function module WL2WRITE50 not correctly generated yet |
| 168 | Interface mapping IFMAP_WL110_TO_WL150 not correctly generated yet |
| 169 | Interface mapping IFMAP_WL110_TO_WL150 not present yet |
| 170 | Interface mapping IFMAP_WL110_TO_WL150 |
| 171 | Interface mapping IFMAP_WL210_TO_WL250 not correctly generated yet |
| 172 | Interface mapping IFMAP_WL210_TO_WL250 |
| 173 | Interface for function module WL2WRITE050 not present yet |
| 174 | Interface mapping IFMAP_WL210_TO_WL250 not present yet |
| 175 | Function module WL2WRITE010 not present yet |
| 176 | Function module WL2WRITE050 not present yet |
| 177 | Structure WL1DDICSTRUCALL not correctly generated yet |
| 178 | Structure WL1DDICSTRUCOUT not correctly generated yet |
| 179 | Table WL1DDICTAB not correctly generated yet |
| 180 | Table type WL1DDICTTYPALL not correctly generated yet |
| 181 | Structure WL1DDICSTRUCALL not present yet |
| 182 | Structure WL1DDICSTRUCOUT not present yet |
| 183 | Table WL1DDICTAB not present yet |
| 184 | Table type WL1DDICTTYPALL not present yet |
| 185 | Parameter &1 is technical and is not generated by default; check skipped |
| 186 | Table not correctly generated yet for parameter &1 |
| 187 | Structure not yet generated for interface parameter &1 |
| 188 | Structure not correctly generated yet for parameter &1 |
| 189 | Interface mapping IFMAP_WL1_TO_WL2 not present yet |
| 190 | Cluster table for transfer list not generated yet |
| 191 | Cluster table for transfer list not correctly generated yet |
| 192 | Simulation details not maintained yet |
| 193 | Simulation type &1 not yet supported |
| 194 | Structure WL1DDICSTRUCERR not present yet |
| 195 | Configuration proposal is inconsistent and cannot be loaded |
| 196 | No corresponding parameter for field &1 present in transformation rule &2 |
| 197 | Designated transformation rule export parameter not maintained |
| 198 | Maintained TRule export parameter does not exist in TRule |
| 199 | Interface &1 |
| 200 | Status manager class not present yet |
| 201 | Configuration parameters |
| 202 | Configuration parameter &1: item &2 unknown |
| 203 | Configuration parameter &1: value &3 not allowed for item &2 |
| 204 | Configuration parameter group ID |
| 205 | Configuration parameter &1 is unknown |
| 206 | Interface 1 &1 |
| 207 | Interface 2 &1 |
| 208 | Interface mapping IFMAP DM_TO_WL1 not present yet |
| 209 | Interface mapping IFMAP DM_TO_WL1 |
| 210 | Interface mapping IFMAP WL1_TO_WL2 not correctly generated yet |
| 211 | Interface mapping IFMAP WL1_TO_WL2 |
| 212 | Interface mapping &1 for worklist result link |
| 213 | Data model &1 |
| 214 | Interface IF_WLRL_SND not present yet |
| 215 | Interface IF_WLRL_RCV not present yet |
| 216 | IF WLRL_SND does not have any parameters in include .RLINC |
| 217 | IF WLRL_RCV does not have any parameters in include .RLINC |
| 218 | Structure WLRL_RLINC_DDICSTRUC_SND does not exist |
| 219 | Structure WLRL_RLINC_DDICSTRUC_RCV does not exist |
| 220 | Table WLRL_DDICTAB_SND does not exist |
| 221 | Table WLRL_DDICTAB_RCV does not exist |
| 222 | Structure WLRL_RLINC_DDICSTRUC_SND not correctly generated yet |
| 223 | Structure WLRL_RLINC_DDICSTRUC_RCV not correctly generated yet |
| 224 | Table WLRL_DDICTAB_SND not correctly generated yet |
| 225 | Table WLRL_DDICTAB_RCV not correctly generated yet |
| 226 | Table &1 (WLRL_DDICTAB_SND) and IF &2 (IF_WLRL_SND) are not in sync |
| 227 | Table &1 (WLRL_DDICTAB_RCV) and IF &2 (IF_WLRL_RCV) are not in sync |
| 228 | Class &1 (WLRLSERIAL_<TARGET>) not correctly generated yet |
| 229 | Class WLRLSERIAL_<TARGET> does not exist |
| 230 | Class TRFMSERIAL not correctly generated yet |
| 231 | Class TRFMSERIAL not present yet |
| 232 | Grouping is active but no grouping field is defined yet |
| 233 | Configuration parameter &1 |
| 234 | Maintained TRule exporting parameter is incompatible with TRFM parameter |
| 235 | Data inconsistency (&1); contact SAP for support |
| 236 | For analysis help of transformation rule problem see long text |
| 237 | Scenario 002 is active, but flag 'Import Extensions' is not set |
| 238 | Extension fields of worklist |
| 239 | Parameter &1 is not generation relevant |
| 240 | Area worklist result link interface (&1) &2 |
| 241 | Result link parameter (RLPA) &1 not present in area WLRL interface (&2) |
| 242 | Execution rule step numbering is inconsistent |
| 243 | Transfer method object (&1) is unknown; check your entry |
| 244 | Name (&1) of transfer method object (&2) is not valid; check your entry |
| 245 | No transformations defined for obligatory parameter &1 |
| 246 | Object type &1 not supported as code step owner |
| 247 | Class &1 does not exist in &2 system |
| 248 | Specify an export parameter of TRule for mapping |
| 249 | Area &1 can't become the predecessor area of &2 |
| 250 | Interface has no top parameter |
| 251 | PARENT_ID &1 of interface parameter &2 does not belong to interface |
| 252 | Parameter of kind &1 not allowed in interface of type &2 |
| 253 | Parameter of type &1 not allowed in interface of type &2 |
| 254 | Parameter name &1 not allowed in interface of type &2 |
| 255 | Error in foreign key &1 of interface parameter &2 |
| 256 | Foreign key &1 does not point to another parameter of this interface |
| 257 | No PARTYP info present for interface parameter (of type field) &1 |
| 258 | Parameter numbering error for parameter &1 and &2 of parent &3 |
| 259 | Parameter &1: Parameter and parent must not be identical |
| 260 | An interface of type FUMO must have a function module as reference |
| 261 | An interface of type WL2 must have a transfer method as reference |
| 262 | Parent parameter of include parameter &1 must be a structured parameter |
| 263 | Required include &1 does not exist |
| 264 | Debit/credit reference parameter ID missing for parameter &1 |
| 265 | Debit/credit reference param &1 of param &2 does not belong to interface |
| 266 | Reference parameter &1 of parameter &2 does not belong to interface |
| 267 | SEQNUM numbering error in FORKEY of param &1 |
| 268 | Move parameter &1 does not exist in worklist result link |
| 269 | Move parameter is missing |
| 270 | Parameter &1 does not exist in transfer method |
| 271 | Parameter &1 does not belong to data model, worklist or WLRL |
| 272 | Transformation rule (ID &1) does not exist |
| 273 | Transformation rule is missing for parameter &1 |
| 274 | Interface mapping for transfer method parameter &3 |
| 275 | Transfer method parameter &1 |
| 276 | RELV_IDENT &1 (scenario &2) missing for transfer method parameter &3 |
| 277 | Fix value is not supplied for transfer method parameter &1 |
| 278 | Split &1 to &2 |
| 279 | Transformation rule &1 is not a condition rule |
| 280 | Entry for TRFM parameter &1 is for type &2, but parameter has type &3 |
| 281 | Data model parameter missing |
| 282 | Parameter &1 does not exist in data model &2 |
| 283 | Transfer method parameter existence check |
| 284 | Transfer method parameter structural mapping check |
| 285 | Transfer method parameter relevance identifiers check |
| 286 | Transfer method parameter data model assignment check |
| 287 | ScenID &1, relevance identifier &2 |
| 288 | Technical consistency of transformation |
| 289 | Transformation type not specified |
| 290 | Transformation type &1 not allowed on &2 level |
| 291 | Dynamic assign to field &1 of table &2 failed |
| 292 | Type kind &1 for parameter &2 is not valid |
| 293 | Type name for parameter &1 is initial |
| 294 | No table defined in data model |
| 295 | Both targets (sender and receiver) are excluded |
| 296 | Transformation type &1 unknown |
| 297 | Scenario &1 |
| 298 | Parameter &1 does not exist |
| 299 | Parameter &1 does not exist in worklist of area &2 |
| 300 | Sender parameter must either be empty or filled for all rel. identifiers |
| 301 | Sender parameter initial on structure and relevance identifier levels |
| 302 | Sender parameter filled on structure and relevance identifier levels |
| 303 | No corresponding entry on structure level exists |
| 304 | Transformation rule type is empty |
| 305 | Transformation rule type &1 is not supported |
| 306 | Condition rules are not maintained for all relevance identifiers |
| 307 | Sender parameter &1 is not a table |
| 308 | Transformation rule &1 is not a split rule |
| 309 | Split is not defined on structure level for parameter &1 |
| 310 | KB Inconsistency |
| 311 | Parameter &1 does not exist in worklist result link (&2) of area &3 |
| 312 | Split cannot be defined if condition rule is maintained |
| 313 | Flag 'Split flexible' must be set, otherwise split rule &1 is ignored |
| 314 | All sender parameters are equal; assign sender parameter on KB STR level |
| 315 | Sender parameter must be maintained if split is defined |
| 316 | Timestep is empty |
| 317 | Move parameter &1 does not exist in worklist |
| 318 | Relevance identifier &1 |
| 319 | Interface mapping &1 does not exist |
| 320 | Sender parameter must contain an extension table name |
| 321 | Split is not defined, relevance identifiers cannot be defined |
| 322 | Data model content required; import needs to be activated for TRFM &1 |
| 323 | Data model content required; storage needs to be activated for area &1 |
| 324 | Success evaluation must be defined for transfer method &1 |
| 325 | Transfer method settings check |
| 326 | Ignore transformation rule does not exist but calling it is activated |
| 327 | Ignore transformation &1 rule not correctly generated yet |
| 328 | Split seqnum must be filled if no rule is provided |
| 329 | Split seqnum must be filled for all or no relevance identifier |
| 330 | Totals Customizing not present yet |
| 331 | Ledger update settings are inconsistent: required fields empty |
| 332 | Ledger &1 does not exist in sender system |
| 333 | Update scenario of ledger &1 differs from the update scenario of area |
| 334 | Company code &1: Update scenario of ledger &2 is not valid |
| 335 | Period settings are inconsistent: required fields empty |
| 336 | Company code &1: Source period &2 (ledger &3) is not supported |
| 337 | No update ledger settings exist |
| 338 | Ledger check in sender system failed |
| 339 | Split seqnum must not be greater Split Max. |
| 340 | Split seqnum &1 occurs several times in Knowledge base - RELV_ID |
| 341 | Transfer method parameter links check |
| 342 | No links for field &1 found |
| 343 | Field transformation is defined for field &1 with unspecified link |
| 344 | A split rule is missing for parameter &1 |
| 345 | Either Split seqnum or Condition TRule must be filled |
| 346 | Link type is not specified |
| 347 | Link type 'Copy' is maintained for field &1 |
| 348 | Errors found during Configuration ID check |
| 349 | Configuration ID &1 contains spaces or invalid characters |
| 350 | Check Result |
| 351 | Traceability issues expected |
| 352 | Field &1 does not exist in .RLINC structure of worklist result link |
| 353 | Traceability issues expected |
| 354 | Traceability issues expected |
| 355 | No traceability issues expected; no WL items have been transferred |
| 356 | Access path (&1,&2): Index value missing |
| 357 | Access path (&1,&2): Index parameter does not exist |
| 358 | Access path (&1,&2): Index parameter does not belong to data model |
| 359 | Access path (&1,&2): Index parameter must be Tables parameter |
| 360 | Take from Sender for Enrich conflicts with Exclude Sender for the area |
| 361 | Select a data model field for Move |
| 362 | Parameter &1 does not exist in the data model of current area |
| 363 | Transformation rule &1 does not exist |
| 364 | Extension rule &1 will be used in both Selection and Enrich processes |
| 365 | Select a transformation rule for &1 |
| 366 | Enter a fixed value for &1 |
| 367 | Specify Depreciation Area Configuration |
| 368 | Cannot select 'Take from Sender'; no sender execution rule exists in area |
| 369 | Trans. rule for Revenue Information must have one export parameter |
| 370 | Export parameter type of trans. rule for revenue information is incorrect |
| 371 | Fixed value must not be enclosed by apostrophes |
| 372 | Import parameters of trans. rule in Revenue Information not maintained |
| 373 | Select an import parameter for Parameter Name |
| 374 | Parameter &1 is not maintainted |
| 375 | Import parameters of transformation rule &1 are not maintained |
| 376 | Transfer Methods Check |
| 377 | Access path (&1,&2): Logical expression missing |
| 378 | Transfer method parameter access path check |
| 379 | Split cannot be defined for structure parameters |
| 380 | Parameters &1 is incompatible with &2 and cannot be assigned |
| 381 | Reading setting differs between &1|&2 and &1|&3 for field &4 |
| 382 | Transfer method with mass processing but missing success evaluation |
| 383 | Transfer method with mass processing but too many parameters configured |
| 384 | Success evaluation parameter &1 is not a table-like parameter |
| 390 | RFC destination &1 is in status error |
| 391 | Enter a valid RFC destination |
| 392 | Connection error for RFC destination &1 |
| 393 | RFC destination &1 is consistent |
| 394 | Area &1 has worklist data. RFC change not allowed |
| 400 | ABAP class for plausibility check not available; check not possible |
| 401 | Worklist of area &1 is not empty (see long text) |
| 402 | Worklist of area &1 is empty |
| 403 | Status of worklist items (sender): &1 unprocessed, &2 with errors |
| 404 | Status of worklist items (receiver): &1 unprocessed, &2 with errors |
| 405 | Creation of check data object (&1) failed |
| 406 | Parameter &1 is incompatible with parameter &2 |
| 407 | Parameter &1 is partly compatible with parameter &2 |
| 408 | TRule export parameter is partly compatible with TRFM parameter |
| 409 | Table MSG_INDX_TAB not correctly generated yet |