COM_ATTRFRG_GEN - Nachrichtenklasse f�r Attribute und Fragmente Generierung
The following messages are stored in message class COM_ATTRFRG_GEN: Nachrichtenklasse f�r Attribute und Fragmente Generierung.
It is part of development package COM_SETTYPE_ATTRIBUTE in software component AP-MD-PRO. This development package consists of objects that can be grouped under "Generating Set Types and Attributes".
It is part of development package COM_SETTYPE_ATTRIBUTE in software component AP-MD-PRO. This development package consists of objects that can be grouped under "Generating Set Types and Attributes".
Message Nr ▲ | Message Text |
|---|---|
| 000 | No technical attribute exists for the logical attribute |
| 001 | Intervals overlap |
| 002 | Value &1 exists twice or the intervals overlap |
| 003 | Single value &1 is contained in one of the previous intervals (&2 - &3) |
| 004 | Field name contains a non-alphanumeric character |
| 005 | Object name cannot begin with an underscore |
| 006 | Enter a value in the field |
| 007 | Remove the leading blank |
| 008 | Object name contains blanks |
| 009 | Enter an object name |
| 010 | Assignment to the field symbol & failed |
| 011 | Decimal places are not permitted for this data type |
| 012 | No technical attribute exists for the logical attribute |
| 013 | Data type "Date" requires the length 8 |
| 014 | Enter a value |
| 015 | Objects in customer namespace must begin with Y or Z |
| 016 | Object name & is in the customer namespace |
| 017 | Set & already exists |
| 018 | Set type & does not exist; check your entry |
| 019 | Attribute & does not exist |
| 020 | An attribute is not active; contact your system administrator |
| 021 | Attribute & already exists |
| 022 | A serious error has occurred; contact SAP |
| 023 | Set type & already exists or not fully defined |
| 024 | Set type & already exists |
| 025 | No DDIC object exists for attribute &; contact SAP |
| 026 | Set type name and attribute name cannot contain any blanks |
| 027 | Attribute & is not active; contact your system administrator |
| 028 | Errors occurred when function & was called |
| 029 | Single values and intervals are not allowed with this data type |
| 030 | Enter a shorter value |
| 031 | No values selected |
| 032 | Attribute &1 already exists in set type &2 |
| 033 | Maximum length of & was exceeded |
| 034 | Attribute & cannot be deleted because it is still used in other set types |
| 035 | Set/attribute & can be deleted |
| 036 | Only part of attribute & can be changed; already being used in set types |
| 037 | Enter an attribute |
| 038 | Enter a set type |
| 039 | Set type & cannot be deleted; it is already assigned to an object |
| 040 | Only part of set type & can be changed; already assigned to an object |
| 041 | Attribute & cannot be deleted; still being used in a set type |
| 042 | Set type & does not exist |
| 043 | Error when changing the package |
| 044 | Data type 'Time' requires the length 6 |
| 045 | Set type table & still contains data and cannot be deleted |
| 046 | Attribute & was deleted |
| 047 | Set type & is not active in the database |
| 048 | Administrative data of attribute & could not be deleted |
| 049 | Description of attribute & could not be deleted |
| 050 | An object with the same name already exists for attribute & |
| 051 | Set type & was deleted |
| 052 | Set type & was edited |
| 053 | Attribute & was saved |
| 054 | Fixed values have been adjusted |
| 055 | Not possible to save a set type without attributes |
| 056 | Set type & does not exist |
| 057 | Database table & is not active |
| 058 | Data type 'Unit of measure' requires the length 3 |
| 059 | Data type 'Currency' requires the length 5 |
| 060 | Data type 'Checkbox' requires the length 1 |
| 061 | Lower limit of interval (&1 - &2) is greater than or equal to upper limit |
| 062 | Property cannot be changed as attribute is already used in set types |
| 063 | You are not authorized to delete set types or attributes |
| 064 | You are not authorized to create set types or attributes |
| 065 | You are not authorized to change set types or attributes |
| 066 | You are not authorized to display set types or attributes |
| 067 | Internal error & during authorization check for set types/attributes |
| 068 | Specify an attribute length |
| 069 | Template for generating set type objects missing |
| 070 | A table or table type for set type & could not be activated |
| 071 | Error occurred when creating the function group for set type & |
| 072 | No DDIC object for set type &; contact SAP |
| 073 | An object with the same name already exists for set type & |
| 074 | You have assigned too many attributes to the set type & |
| 075 | Error when deleting the function group for set type & |
| 076 | Error when deleting the table for set type & |
| 077 | Error when deleting the table type for set type & |
| 078 | Attribute & is not defined as a multiple-value attribute |
| 079 | No attributes found for set type & |
| 080 | An attribute with type & can have a maximum of 14 decimal places |
| 081 | Number of decimal places (&1) exceeds attribute length &2 |
| 082 | Error when deleting function module & |
| 083 | Attribute & predefined by SAP; change with caution |
| 084 | You are not authorized to change the SAP attribute & |
| 085 | Object names cannot contain an underscore in the first three characters |
| 086 | Data record could not be saved |
| 087 | Object & has errors (no TADIR entry exists) |
| 088 | Maximum number of set types has been reached |
| 089 | Multiple-value flag cannot be changed as set type is already being used |
| 090 | Set type must be assigned to at least one product type |
| 091 | Entry in table &1 with IDs &2 and &3 already exists |
| 092 | Entry in table &1 with IDs &2 and &3 was not deleted |
| 093 | Entry in table &1 with IDs &2 and &3 was not changed |
| 094 | Entry in table &1 with IDs &2 and &3 was not found |
| 095 | No entries found in table & |
| 096 | Data type & does not exist |
| 097 | Error when reading relationship between set type and category |
| 098 | Internal error when reading data for set type & |
| 099 | Internal error when reading data for attribute & |
| 100 | Enter a name for set type &1 |
| 101 | Enter a name for attribute &1 |
| 102 | Data type 'Character String' allows a maximum length of 132 characters |
| 103 | Internal error when creating set type dynpro |
| 104 | Error when writing set type information |
| 105 | Error when deleting set type information |
| 106 | Error when reading DDIC template & |
| 107 | Not enough space available on the dynpro |
| 108 | Set type is already being maintained by user & |
| 109 | Attribute is already being maintained by user & |
| 110 | Attribute & is not used in any set types |
| 111 | Set type & is not used in any categories |
| 112 | Specified value table & does not exist |
| 113 | Specified value table & does not have a suitable key field |
| 114 | Data type of key field of table & is not suitable |
| 115 | Enter a data type for the attribute |
| 116 | Set type cannot be assigned an object family |
| 117 | Field name contains blanks or non-alphanumeric characters |
| 118 | Set type & is already on transport list |
| 119 | Error occurred when deleting view for set type & |
| 120 | Set type &1 predefined by SAP; change with caution |
| 121 | You are not authorized to change SAP set type &1 |
| 122 | You are not authorized to delete SAP set type &1 |
| 123 | You are not authorized to delete SAP attribute & |
| 124 | Attribute &1 has data type &2; cannot be used in configuration |
| 125 | Set type &1 cannot be displayed |
| 126 | Enter either a set type or an attribute |
| 127 | Regenerate set type |
| 128 | Key attributes must be at the beginning |
| 129 | Decimal places are adjusted to &1 and the output length is adjusted to &2 |
| 130 | A line with the same key combination already exists |
| 131 | The key field & cannot have an initial value |
| 132 | A set type must contain at least one key field |
| 133 | A set type must contain at least one data field |
| 134 | Invalid data type for key field (Example: Checkbox, Quantity, Amount ...) |
| 135 | Single value or value of lower limit cut off |
| 136 | Value of upper limit cut off |
| 137 | Select line to be deleted |
| 138 | Set type &1 is already being used in client &2 |
| 139 | No domain exists for data element (key) of value table & |
| 140 | Attribute & already exists on transport list |
| 141 | Set type cannot be edited with transaction COMM_ATTRSET |
| 142 | Business object is incorrect; no set type w. business object & available |
| 143 | No entries in the control table COMS_ATTR_SET |
| 144 | 'Multiple Values' and "Field Is Key" exclude each other |
| 145 | No import parameters specified; enter at least one parameter |
| 146 | Set type cannot be maintained with this transaction (CRMC_PPR_ATTRSET) |
| 147 | All key fields cannot be initial |
| 148 | Select a line to enter a language-dependent short text |
| 149 | Error during transport of attribute & |
| 150 | Import parameter & not permitted |
| 151 | Fixed value/limit for data type & must be a positive integer |
| 152 | Attribute &1 was copied |
| 153 | Set type &1 was copied |
| 154 | You are not authorized to copy set types or attributes |
| 155 | Table entries for the People-Centric UI were regenerated |
| 156 | No product type found |
| 157 | Attribute lengths corrected to maximum value for multi-value attributes |
| 158 | An entry with the same key values exists in line &1 |
| 159 | Set type cannot be maintained with transaction MDF_ATTRSET |
| 160 | Error in call of method & |
| 161 | Fixed values converted to uppercase |
| 162 | Objects in different packages |
| 179 | Internal error in &1 |
| 180 | Attribute &1 is used in &2 (and others) |
| 181 | Attribute &1 cannot be assigned |
| 182 | Transport request was created |
| 183 | The assigned name is too short; use at least 3 characters |
| 184 | & is a reserved word; choose another field name |
| 185 | No entries in table TRESE |
| 186 | No entries in table T000 |
| 187 | Key fields of set type can only be & characters long |
| 188 | Multiple use and "distribution-chain-dependent' are mutually exclusive |
| 189 | Multiple-value attributes are listed at the end |
| 190 | Multi-value integer-attributes with fixed values are restricted in length |
| 191 | Transport terminated |
| 192 | Attribute short text is longer than 20 characters |
| 193 | Data type 'Language Key' requires the length 1 |
| 194 | Set type & cannot be deleted; usages still exist |
| 195 | Data type is limited to a maximum 255 characters |
| 196 | Attribute & cannot be deleted; already used in products |
| 197 | Set type &1 can only be changed in the source system &2 |
| 198 | Attribute length and decimal places corrected to maximum value |
| 199 | Attribute length corrected to maximum value (&1) for data type &2 |
| 200 | Decimal places corrected to maximum value (&1) for data type &2 |
| 201 | Maximum of &1 characters can be displayed in SAP-GUI |
| 202 | Decimal places adjusted to attribute length (&1) |
| 203 | Attribute type &1 cannot be case sensitive |
| 204 | Attribute type &1 cannot have multiple values |
| 205 | Specify a value table |
| 206 | Specify either a value table or an attribute type |
| 207 | Specify a lower limit for the upper limit &1 of the interval |
| 208 | To maintain the attribute definition, log on in &1 |
| 209 | You are not authorized to maintain attributes |
| 210 | Wizard status is not defined; contact SAP |
| 211 | Assign at least one attribute to the set type |
| 212 | Choose a &1 character name |
| 213 | You are not authorized to maintain set types |
| 214 | Choose a valid organizational dependency |
| 215 | Remove duplicate assignments of attribute &1 |
| 216 | Change duplicate usages of field name &1 |
| 217 | Attribute &1 not suitable as key field due to attribute type |
| 218 | Field name &1 is too short; choose at least a &2-character name |
| 219 | Field name &1 has blanks or non-alphanumeric characters |
| 220 | Field name can only be assigned in SAP systems |
| 221 | Multiple-value attributes are only permitted in multiple-use set types |
| 222 | Field name &1 is too long; choose a name with a maximum of &2 characters |
| 223 | Incorrect field name &1 in table COMS_SET_GEN_DEF; contact SAP |
| 224 | Start the set type name with the namespace &1 defined in the project |
| 225 | Start the attribute name with the namespace &1 defined in the project |
| 226 | Attribute &1 is not part of a transportable package |
| 227 | Data type permits a maximum length of 75 characters for PC-UI |
| 228 | Enter a fixed value |
| 230 | The number &1 of the decimal places deviates from the standard number &2 |