CONSENT_MANAGEMENT - Consent Administration: General Message Class
The following messages are stored in message class CONSENT_MANAGEMENT: Consent Administration: General Message Class.
It is part of development package CONSENT_DB in software component CA-GTF-CON. This development package consists of objects that can be grouped under "Consent Administration: Database Layer".
It is part of development package CONSENT_DB in software component CA-GTF-CON. This development package consists of objects that can be grouped under "Consent Administration: Database Layer".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | Source / target combination not supported for mapping: &1 -> &2 |
| 002 | Imported parameter is_struc doesn't contain a flat/deep structure |
| 003 | Imported parameter is_struc contains a table type which is not supported |
| 004 | Table to be modified is not supported by this data access object |
| 005 | &1&2&3&4 |
| 016 | Consents could not be saved |
| 017 | Form texts could not be saved |
| 019 | Consent Validation Messages |
| 032 | Consent '&1': Duplicate form text IDs |
| 033 | Consent '&1': Form text with ID '&2' persisted differently on database |
| 035 | Consent could not be found |
| 036 | Consents '&1' and '&2' are invalid |
| 045 | No source with name '&1' found |
| 048 | Select a row to show form texts |
| 049 | Select a row to show change documents |
| 050 | ### Internal Messages ### |
| 051 | Log level '&1' was changed to '&2'; choose a valid number between 1-5 |
| 052 | Search supports only positive values for IV_MAX_ENTRIES absolute used |
| 053 | Log disabled |
| 054 | Log enabled with log level '&1' and save enabled |
| 055 | Log enabled with log level '&1' and save disabled |
| 056 | Consent '&1': The form text '&2' was not found |
| 057 | Select a row to show attachments |
| 058 | No attachments for the selected consent record found |
| 100 | ### Consent Validation ### |
| 101 | Consent not valid &1 |
| 102 | Consent with ID '&1' is not valid |
| 103 | Consent '&1': Field '&2' must not be empty |
| 104 | Consent '&1': Field '&2' in combination with field '&3' must not be empty |
| 105 | Consent '&1': Form texts for field '&2' are not available |
| 106 | Consent '&1': Field '&2' is not valid |
| 107 | Consent '&1': Field '&2' in combination with field '&3' is not valid |
| 108 | Consent '&1': Field '&2' must be less than field '&3' |
| 109 | Consent '&1': Field '&2' must be empty when field '&3' is empty |
| 110 | Consent '&1': Value of field '&2' is not in a valid range |
| 111 | Unable to determine key field of check table '&1' for field '&2' |
| 112 | Consent '&1': Newer version of this consent is already available |
| 113 | Consent '&1': Fields '&2' and '&3' must both be filled or both empty |
| 114 | Consent '&1': Combination of fields '&2' and '&3' is not valid |
| 115 | Consent '&1': All third party fields must either be filled or empty |
| 116 | Consent '&1': Import consents not permitted; missing authorization |
| 117 | Search consents not permitted; missing authorization |
| 118 | Read consents not permitted; missing authorization |
| 119 | Import consents not permitted; missing authorization |
| 120 | Consent with ID '&1' already exists |
| 121 | Consent '&1': Combination of data subject type and ID is not valid |
| 122 | Consent '&1': Combination of withdrawn at, by and consent status invalid |
| 123 | Consent '&1': Same version of this consent is already available |
| 124 | Consent '&1' and origin_changed_at '&2' has newer version or duplicate |
| 125 | Consent '&1': Field '&2' must have leading zeros |
| 126 | Consent '&1': Field lifecycle_status is expired. Consent will be skipped |
| 127 | Consent '&1': Field lifecycle_status is blocked |
| 128 | Consent '&1': Contains blocked data subject |
| 129 | Consent '&1': No handler class found for data subject ID type '&2' |
| 130 | ### Consent Import Mapper ### |
| 131 | Consent '&1': Value '&2' of field '&3' is not processible |
| 132 | Consent '&1': Language code '&2' cannot be converted into SAP lang. code |
| 133 | Mapping started at '&1' |
| 134 | Mapping '&1' consent records |
| 135 | Mapping ended at '&1'; '&2' of '&3' consent records are valid |
| 136 | Consent '&1': Error occurred while locking; consent is already locked |
| 137 | Consent '&1': System failure occurred while locking |
| 138 | Consent '&1': Unknown error occurred while locking |
| 139 | Consent '&1': Withdrawn opt-out consent; maximum valid to set to '&2' |
| 140 | Consent '&1': No assignment of '&2' with corresponding '&3' and '&4' |
| 141 | Withdraw consents not permitted; missing authorization |
| 142 | Terminate consents not permitted; missing authorization |
| 143 | Consent '&1': Withdraw consent not permitted; missing authorization |
| 144 | Consent '&1': Terminate consents not permitted; missing authorization |
| 148 | Handler class '&1' cannot be instantiated; check implementation |
| 149 | Multiple implementations for interface IF_CM_BLOCKED_DATA_SUBJECT found |
| 150 | ### Consent Import via Service ### |
| 151 | The query string of source with name '&1' is incorrect |
| 152 | Import data cannot be read from source with name '&1' |
| 153 | Source with name '&1' cannot be found |
| 154 | Source with name '&1' is not active |
| 155 | No consent available to be imported within the chosen time interval |
| 156 | Imported data is invalid |
| 157 | Destination '&1' not found; check CMV_SRCE_INFO and destination |
| 158 | Sending the HTTP request failed |
| 159 | Receiving the HTTP response failed |
| 160 | Destination '&1' not available; check CMV_SRCE_INFO and destination |
| 161 | No authority for accessing destination '&1' |
| 162 | Destination '&1' needs to be checked |
| 163 | HTTP status code: &1 |
| 164 | Message: &1&2&3&4 |
| 165 | Unsuccessful service call: HTTP status code '&1' message '&2' |
| 200 | ### Import Messages ### |
| 201 | Import started with '&1' consent records at '&2' |
| 202 | '&1' of '&2' consent records were imported |
| 203 | Import finished at '&1' |
| 204 | Change documents will ignore insert |
| 205 | Import will run as a test; data will not be persisted |
| 206 | No consent records found |
| 207 | The file to import is empty |
| 208 | No consent records to import |
| 209 | Consent '&1' with ID '&2' imported successfully |
| 210 | File '&1' not found |
| 211 | Error while processing the file; see log for additional information |
| 212 | File '&1' exceeds the size limit of 100MB |
| 250 | ### Read Messages ### |
| 251 | Consent '&1': Read consents not permitted; missing authorization |
| 252 | Consent '&1' does not exist |
| 253 | Too many search criteria. Reduce the amount of search criteria. |
| 300 | ### Customizing Messages ### |
| 301 | Source name '&1' is invalid |
| 302 | No non-alphanumeric characters except for '_' allowed in the source name |
| 303 | Source name must not be empty |
| 304 | Query string is invalid |
| 305 | RFC destination type different from '&1' not supported; data not saved |
| 306 | Query string is missing |
| 307 | Source name '&1' does not exist |
| 308 | Controller with ID '&1' and type '&2' does not exist. |
| 309 | '&1' is invalid |
| 310 | Controller with name '&1' cannot be deleted; '&2' Consents exist |
| 311 | Assignment '&1' with type '&2' cannot be deleted, '&3' Consents exist |
| 312 | Assignment '&1' with type '&2' already exists with controller name '&3' |
| 330 | The assumed aging date for this analysis is '&1' |
| 331 | Number of consents: &1 |
| 332 | Number of consent records where the residence period is over: &1 |
| 333 | Statistics aggregated per ILM condition field for consents |
| 334 | Data Ctrl '&1', Data Subj. ID type '&2', Jurisd. '&3', count consents &4 |
| 335 | D.Ctrl '&1', D.S.ID type '&2', Jurisd. '&3', # consents res. per. over &4 |
| 400 | Consent '&1' is invalid |
| 401 | Schema validation started at '&1' |
| 402 | Schema validation ended at '&1'; '&2' of '&3' consent records are valid |
| 403 | Validating '&1' consent records |
| 404 | File '&1' cannot be opened |
| 405 | File '&1' cannot be read |
| 406 | There are too many files already opened. File '&1' cannot be opened |
| 407 | Pipes are not supported by the operating system |
| 408 | No authority to open file '&1' |
| 409 | No consents provided. Data content is initial. |
| 410 | Currently '&1' mapping is not supported; 'S4HANA' expected |
| 411 | BAdI impl. '&1' uses a non-flat structure; only flat ones allowed |
| 412 | Component with name '&1' is not flat |
| 413 | Conversion error occurred at component '&1' with value '&2' |
| 414 | Target field '&1' was not found |
| 415 | Parsing error occurred at offset '&1' |
| 416 | BAdI CM_IMPORT_MAPPING implemented multiple times for filter '&1' |
| 417 | Initial data found. |
| 418 | Deep structure detected at offset '&1'. Consent will be skipped |
| 419 | Rounding occurred when mapping from src field '&1' to target field '&2' |
| 420 | Creation of source structure descriptor failed |
| 421 | Component with name '&1' cannot be found at offset '&2' |
| 422 | Log with number '&1' saved |
| 423 | A field with name '&1' contains an invalid UTF-8 character(s) |
| 450 | Re-caculation started in &1 mode |
| 451 | '&1' consents to re-calculate the statuses for |
| 452 | Consent '&1': Could not change the statuses in database |
| 453 | Consent '&1': old lifecycle status is '&2', new one is '&3' |
| 454 | Consent '&1': old consent status is '&2', new one is '&3' |
| 455 | Error while initializing parallel processing |
| 456 | RFC error in callback routine; Message: &1 |
| 457 | Consent '&1': Not processed (RFC error with RC &2 and Message &3) |
| 458 | Starting Re-calculation of statuses in mode &1 |
| 459 | Parallel task created and saved log with number &1 |
| 460 | No data to process |
| 461 | No log messages from parallel tasks |
| 462 | No range, only option equals, only sign inclusive is allowed for UUIDs |
| 463 | No physical file name found for logical file name '&1' |
| 464 | Consent '&1': End of validity date was initial, new one is '&2' |
| 465 | Name '&1' must be 1 to 30 chars long and alphanumeric (including _-!.~) |
| 500 | ### EoP check Log messages ### |
| 501 | Start End of Purpose check |
| 502 | Checking '&1' partners |
| 503 | End of Purpose check completed |
| 504 | Business Partner with number '&1' and GUID '&2' is checked |
| 505 | Customer '&1' is checked |
| 506 | Vendor '&1' is checked |
| 507 | Contact Person '&1' is checked |
| 508 | No consent records found for partner '&1'; partner unknown |
| 509 | '&1' consent records found for partner '&2' |
| 510 | Checking consent record '&1' with ID '&2' |
| 511 | Consent record '&1' indicates ongoing business |
| 512 | End of business of consent record '&1' is '&2' |
| 513 | Found ILM rule group '&1' |
| 514 | At least one ILM ret. rule found for ILM object '&1' and consent '&2' |
| 515 | No ILM rule group found for ILM object '&1' and consent '&2' |
| 516 | No application rule variant found. Proceed with empty rule variant |
| 517 | Found application rule variant '&1' |
| 518 | Error during end of residence calc. for partner '&1' and consent '&2' |
| 519 | End of residence for consent record '&1' is '&2' |
| 520 | Purpose completed for partner '&1' and end of purpose '&2' |
| 521 | Purpose not completed for partner '&1' and end of purpose is '&2' |
| 522 | Condition field '&1' has value '&2' |
| 523 | Withdraw '&1' consent records as test; data is not persisted |
| 524 | Terminate '&1' consent records as test; data is not persisted |
| 525 | Consent '&1' could not be found |
| 526 | Withdraw consent '&1' |
| 527 | Terminate consent '&1' |
| 528 | Consent '&1' cannot be withdrawn; it is already withdrawn |
| 529 | Consent '&1' cannot be terminated; it is already terminated |
| 530 | Withdraw '&1' consent records; data is persisted |
| 531 | Terminate '&1' consent records; data is persisted |
| 532 | Withdrawal finished; '&1' of '&2' consents withdrawn |
| 533 | Termination finished; '&1' of '&2' consents terminated |
| 534 | Source Info '&1' is used in at least one consent; deletion not permitted |
| 535 | Deletion of Data Controller '&1' not possible |
| 536 | Deletion of Data Controller Assignment '&1' with type '&2' not possible |