CU - Messages Varianten / Konfiguration
The following messages are stored in message class CU: Messages Varianten / Konfiguration.
It is part of development package CUMT in software component CA-GTF-DEP. This development package consists of objects that can be grouped under "Maintenance Environment for Dependencies".
It is part of development package CUMT in software component CA-GTF-DEP. This development package consists of objects that can be grouped under "Maintenance Environment for Dependencies".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Dependency & has not yet been used |
| 001 | Dependency & already exists |
| 002 | Dependency & does not exist |
| 003 | Select a dependency type |
| 004 | You can only select one dependency type |
| 005 | Dependency & has been changed |
| 006 | Dependency & has been created |
| 007 | Dependency & has been deleted |
| 008 | Dependency & is already being processed by & |
| 009 | Dependency was not changed |
| 010 | Dependency does not exist |
| 011 | The description in logon language & cannot be deleted |
| 012 | General locking error |
| 013 | Internal error: &1, &2, &3, &4 |
| 014 | Dependency & already assigned |
| 015 | Select the end of the block |
| 016 | Select an entry first |
| 017 | Indicate where you want the entries to be inserted |
| 018 | Number range error |
| 019 | Documentation for dependency & not available in language & |
| 020 | Multiple classification not allowed for dependency & |
| 021 | Error reading documentation for dependency & & |
| 022 | Error copying documentation for dependency & & |
| 023 | Select a valid line |
| 024 | Enter a dependency name first |
| 025 | No object dependencies exist for this object |
| 026 | There is already an entry in language & |
| 027 | Dependency type & not allowed for this object |
| 028 | Internal error in syntax check for object dependency |
| 029 | Internal error compiling object dependencies |
| 030 | Maintenance authorization & not allowed for this object |
| 031 | Maintenance authorization & does not allow assignments to this object |
| 032 | Used more than once - can only be maintained centrally |
| 033 | Local dependencies cannot be maintained centrally |
| 034 | Dependency status has been set to & |
| 035 | "Released" status not allowed if the source code contains errors |
| 036 | You cannot set status "released" without object dependencies |
| 037 | Invalid dependency name: & |
| 038 | Position the cursor on a valid line item |
| 039 | The dependency name cannot be numeric |
| 040 | Rules and constraints can only be maintained from the dependency net |
| 041 | Dependency net cannot be maintained here |
| 042 | & is already assigned to dependency net & |
| 043 | & is not a dependency net |
| 044 | Dependency net can only be maintained locally with name |
| 045 | You cannot change from SCE while assignments exist |
| 046 | You need not regenerate dependency network |
| 047 | Dependency net was generated without errors |
| 048 | Dependency type of & is not suitable |
| 049 | Changes already made on & with change number & |
| 050 | Dependency marked for deletion since & |
| 051 | Dependency & must be processed with a change number |
| 052 | Change in past (&) |
| 053 | No engineering change management; current date (&) used |
| 054 | New compiler version; generate the dependency net & again |
| 055 | Dependency & does not exist until & |
| 056 | Dependency & has status & |
| 057 | Dependency & has no executable code on & |
| 058 | Deletion indicator removed with same change number |
| 059 | Change number required when editing dependencies for this object |
| 060 | Dependency & is in use |
| 061 | Dependency type not allowed for certain existing assignments |
| 062 | Dependency & used more than once |
| 063 | Net generation terminated - no changes were saved |
| 064 | Error when loading network; start network generation |
| 065 | Dependency & already maintained as dependency net |
| 066 | You cannot assign object dependencies to &1 |
| 067 | Data missing for field &1 |
| 068 | &1 is not assigned to &2 so cannot be deleted |
| 069 | Value &1 not valid for field &2 |
| 070 | Documentation cannot be maintained without description in language &1 |
| 071 | Change of change number requires CUKD_API_INIT call |
| 072 | &1: error/warning messages |
| 073 | ALLOCATION_NUMBER: &1 ALLOCATION_TABLE: &2 ECM_NUMBER: &3 |
| 074 | New date &2 not allowed for &1 - data exists for dep. &3 on &4 |
| 075 | New date &2 not allowed for &1 - assignment data exists for dep. &3 on &4 |
| 076 | New date &2 not allowed for &1 - change number conflict with char. &3 |
| 077 | Customizing table TCUX not maintained |
| 078 | You are not authorized to display this dependency (see &1) |
| 079 | You are not authorized to maintain this dependency (see &1) |
| 080 | Edit authorization &1 cannot be applied from the template |
| 085 | & & is not permitted in this environment |
| 090 | No dependencies were selected |
| 091 | Compilation for dependency net cannot be displayed |
| 100 | INSERT error with RC=& in file & & & |
| 101 | UPDATE error with RC=& in file & & & |
| 102 | DELETE error with RC=& in file & & & |
| 104 | Functions cannot be placed in the menu bar |
| 105 | Recursive menu definitions are not possible |
| 106 | Nesting is too deep |
| 107 | Cannot perform any more inserts |
| 108 | No inserts allowed with funciton key setting |
| 109 | No menu can be assigned to a function key |
| 110 | Error with ext. input data: ext. item &1, inst. &2, object &3 |
| 111 | Input error with char. &1, value &2; cause: &3 |
| 112 | Error: initial confign screen, ext. item: &1, cause: &4 |
| 113 | Caution: the following external input could not be processed: |
| 114 | INST: Inst:&1, Type:&2, Object:&3 |
| 115 | VAL: Inst(?):&1, Characteristic:&2, Value:&3 |
| 116 | VAL: inst. &1, char.(?) &2, value &3 |
| 117 | COND: inst: &1, condition: &2, factor: &3 |
| 118 | PART_OF: parent &1 (?), for item &3, obj. &4 |
| 119 | PART_OF: parent &1, child &2 (?), item &3, obj. &4 |
| 120 | Please choose a menu bar |
| 122 | Please choose a menu |
| 123 | Please choose a function |
| 124 | Please choose a function key setting |
| 125 | Please choose a pushbutton setting |
| 126 | Function code $ is not supported in reports |
| 127 | Please specify a function code |
| 128 | Selected menu is nested too deeply |
| 129 | All menus $ are nested too deeply |
| 130 | Menu type 'I' can be used only in the menu bar |
| 131 | End the dependency session first |
| 132 | Select a Dependency |
| 133 | Include menus (type 'I') are allowed only in the menu bar |
| 134 | Place the cursor on a dependency |
| 135 | Menu $ contains entries. An Include menu cannot contain entries |
| 136 | You have not selected a menu |
| 137 | Interface has been saved and generated |
| 138 | No errors found in the fast path |
| 139 | Function code $ does not exist |
| 140 | Function code $ already exists |
| 141 | Function code $ has been renamed as $ |
| 142 | Please specify the old and the new function code |
| 143 | System functions cannot be selected |
| 144 | System functions cannot be overwritten |
| 145 | Text changed in $ |
| 146 | Include menus can be used only in the menu bar |
| 148 | Function key $ should not be assigned to the first pushbutton |
| 149 | No errors found in the pushbutton settings |
| 150 | Function codes are not permitted in the form <xx> |
| 151 | No errors in the texts |
| 152 | Special characters '<' and '>' are not permitted in texts |
| 154 | Menus conform to the standards |
| 155 | The distribution of functions conforms to the standards |
| 156 | You have already chosen a function. Please copy it. |
| 157 | The function you have chosen does not belong to the menu bar |
| 159 | The value $ is not allowed in the menu bar |
| 160 | Please enter a letter contained in the word |
| 161 | Status $ has been deleted |
| 162 | Status $ has been renamed as $ |
| 163 | Status $ already exists |
| 164 | Status $ does not exist, but can be created |
| 165 | Status $ has been copied to $ |
| 166 | Choose a menu (select with 'X' or press F2) |
| 167 | The menu you selected contains errors (possibly recursive definitions) |
| 168 | The GUI interface has no syntax errors and conforms to the standards |
| 170 | Status $ of program $ does not exist |
| 171 | Separator lines can be inserted only in menus |
| 172 | Specify a number for the function key |
| 174 | Titles of interface $ have been saved |
| 177 | No syntax errors found |
| 178 | Function key $ is set by the system |
| 179 | Function 'Choose' not supported here |
| 180 | Text for function key $ cannot be changed |
| 181 | Function type N is used several times |
| 182 | Fast path $ is not in the text $ |
| 184 | Function $ $ has been deleted from all menus and function keys |
| 185 | Menu $ has been deleted from all menu bars and menus |
| 186 | Function $ $ has been deleted; it was not in use anywhere |
| 187 | Menu $ has been deleted; it was not in use anywhere |
| 189 | Display mode: Interface of program $ is already in use |
| 193 | Status $ does not exist |
| 194 | Window size specifications are taken into accoutn only with modal status |
| 195 | You must specify the window size with modal status |
| 196 | Status $ of program $ has not been created |
| 197 | Include attributes can be maintained only for include menus |
| 199 | Specify one status type only |
| 200 | Item status is incomplete |
| 201 | Status & is not defined |
| 202 | Select one status only |
| 203 | All menu bars are used in at least one status |
| 204 | All unused menu bars have been deleted |
| 205 | Selected menu bar has been deleted |
| 206 | All function key settings are in use |
| 207 | All unused function keys and pushbuttons have been deleted |
| 208 | Selected function keys and pushbuttons have been deleted |
| 209 | All pushbutton settings are in use |
| 210 | All unused pushbutton settings have been deleted |
| 211 | Selected pushbutton setting has been deleted |
| 212 | All function are in use |
| 213 | All unused functions have been deleted |
| 214 | Selected function has been deleted |
| 215 | All menus are in use |
| 216 | All unused menus have been deleted |
| 217 | Selected menu has been deleted |
| 218 | Standard functions cannot be activated without a function code |
| 219 | Please do not set the ENTER key in online screens |
| 220 | Choose a status for printing |
| 222 | All functions of the status $ in program $ have been activated |
| 223 | No status has been created for program $ |
| 224 | No titles have yet been created for the program $ |
| 225 | Interface $ cannot be generated due to syntax errors |
| 226 | Functions cannot be deactivated in this part of the list |
| 227 | Selected object cannot be deleted |
| 228 | Selected menu bar has been deleted with references |
| 229 | Selected funciton key setting has been deleted with references |
| 230 | Selected pushbutton setting has been deleted with references |
| 231 | Function codes beginning with '+' are modifiable |
| 232 | No match found for $ |
| 233 | Pushbuttons can only be moved |
| 263 | Please specify a function code and a name |
| 264 | Program $ does not exist |
| 266 | $ is not an SAP menu |
| 267 | SAP menu $ does not exist |
| 268 | Menu text space is not allowed |
| 269 | Title $ already exists |
| 270 | Screen $ of the program $ does not exist |
| 271 | Screen $ of the program $ contains errors (standard screen) |
| 272 | Title $ does not exist |
| 273 | No titles exist for program $ |
| 274 | Use the cursor to specify the destination |
| 275 | Please choose only one option |
| 276 | Please choose a menu bar |
| 277 | Area menu $ has been saved |
| 278 | Area menu $ has been saved and generated |
| 300 | Knowledge-base object & already exists |
| 301 | Knowledge-base object & does not yet exist |
| 302 | Knowledge-base object & does not exist until & |
| 303 | Knowledge-base object & is being processed by & |
| 304 | You cannot assign maintenance authorization &1 |
| 305 | You are not authorized to maintain &1 &2 |
| 306 | You cannot assign maintenance authorization &1 |
| 307 | Knowledge-base object & saved |
| 308 | Knowledge base & downloaded |
| 309 | Download not possible: knowledge base is not released |
| 310 | Language key & not defined (check your entry) |
| 311 | Enter a description in language & |
| 312 | Enter a language key for description & |
| 313 | An entry already exists for language key & |
| 314 | You cannot delete the description in the logon language |
| 315 | Function has not been executed |
| 316 | SAP menu $ has not yet been created |
| 317 | $ is already defined as a transaction |
| 319 | Dependency net &1 has subsequent status with change number &2 (&3) |
| 320 | Profile name missing for description & |
| 321 | Description missing for profile & |
| 322 | Profile name & has already been assigned |
| 323 | Enter the class type of class & |
| 324 | Delete entry & for material first |
| 325 | Enter OO class for profile & |
| 326 | Class &1 does not exist in class type &2 |
| 327 | Enter at least one profile for knowledge base & |
| 328 | Object dependency &1 has a subsequent status with change number &2 (&3) |
| 329 | Title $ does not exist |
| 330 | Task name missing for description & |
| 331 | Description missing for task & |
| 332 | Task name & has already been assigned |
| 335 | SCE mode not active - maintenance of tasks and events not allowed |
| 340 | Event name missing for description & |
| 341 | Description missing for event & |
| 342 | Event name & has already been assigned |
| 345 | Class &1 has no description in language &2 |
| 346 | Material &1 has no description in language &2 |
| 347 | The order of the predecessor classes is ambiguous |
| 350 | Path name & contains blanks - use MS-DOS name instead |
| 355 | KNUM is assigned in CUOB but missing in CUKB (net: &) |
| 356 | Procedure/action &1 for &2 not suppoerted in the SCE |
| 359 | Variant table &1 does not exist on date &2 |
| 360 | Variant table &1 contains blanks in column &2 |
| 361 | Variant table &2 has no language-dependent description in &1 |
| 362 | Enter a description for table structure & to create the table structure. |
| 364 | Characteristic &2 (or its values) has no description in &1 |
| 365 | Characteristic &1 for &2 has a value in a class type other than &3 |
| 366 | Characteristic & is not assigned to a class and is used in dependencies |
| 367 | Characteristic & in class & with user-defined data type |
| 370 | Version &1 of &2 already exists |
| 371 | Version &1 of &2 does not exist |
| 372 | Knowledge base &1, version &2 is being processed by &3 |
| 373 | Knowledge-base object & is not released |
| 375 | You are not authorized to display (or export) &1 &2 |
| 376 | Version &1 for &2 is still in use |
| 377 | Version &1 of &2 saved |
| 378 | No changes have been made since the last build |
| 379 | Version &1 of &2 deleted |
| 380 | Generated without errors |
| 381 | Generation completed with warning messages |
| 382 | Generation error |
| 383 | Version &1 for &2 saved with warning messages |
| 384 | UDEF characteristics were deleted for class (&1) &2 |
| 385 | & cannot be renamed because a runtime version exists |
| 386 | & cannot be deleted, because a runtime version exists |
| 387 | SCREEN_DEP-&1 not supported, characteristic &2 in dependency &3, &4 |
| 388 | Generation for SCREEN_DEP: dependency &1, &2, facet &3 |
| 389 | & could not be exported |
| 390 | Exported files for knowledge base & were not deleted |
| 391 | & could not be loaded to the database |
| 392 | User &1 could not create SCE database schema in data source &2 |
| 393 | Error in reference characteristic &1 due to cause &2 (-> see long text) |
| 394 | No characteristic found for variant conditions |
| 395 | Invalid entry in allowed values for characteristic &1 |
| 400 | Internal error: &1 &2 &3 &4 |
| 401 | Material &1 has no BOM (BOM application &2, plant &3, SY-SUBRC &4) |
| 402 | POS_NR (&1) in BOM of (&2) not defined |
| 403 | POS_TYPE (&1) in BOM of (&2) not defined |
| 404 | POS_MENGE for &1 in BOM of &2 is greater than 32767 |
| 405 | Class & cannot have a BOM |
| 410 | Characteristic &1 is not assigned to a class |
| 411 | No config. profile exists for material &1 (appl. &2, class type &3) |
| 412 | Variant table &1 is not released in dependency &2 |
| 413 | Status $ of program $ has been deleted |
| 415 | Status $ of program $ has been copied under the name $ |
| 416 | No status has yet been created |
| 419 | Call &2 failed with &1 for arguments &3 &4 |
| 420 | Database &1 is not installed or not in this path |
| 425 | Enter data source, user, and password |
| 427 | Program $ has not yet been created |
| 429 | Only maintenance is possible with status short texts |
| 430 | & deleted |
| 431 | Specify a status |
| 432 | Choose a status |
| 433 | Program $ has type $ |
| 434 | Interface $ already exists |
| 435 | Compilation of dependency net &1 |
| 436 | Class (&2)&1 |
| 437 | Class (&2)&1 - characteristic &3 |
| 438 | Material &1 - configuration profile &2 (&3, &4) |
| 439 | Constraint net &1 - constraint &2 |
| 440 | Rule net &1 - rule &2 |
| 442 | Variant table &1 - column &2 |
| 443 | Characteristic &2 |
| 444 | Characteristic &2 - value &3 |
| 445 | &1 item &2 |
| 505 | Start of processing for dependency &1 &2 |
| 600 | Dependency not found: &1 &2 &3 &4 |
| 601 | Dependency not released: &1 &2 &3 &4 |
| 602 | Source code of dependency not found: &1 &2 &3 &4 |
| 603 | Error in source code of dependency: &1 &2 &3 &4 |
| 604 | Error in single dependency: &1 &2 &3 &4 |
| 607 | Error in dependency net: &1 &2 &3 &4 |
| 610 | Dependency code outdated: &1 &2 &3 &4 |
| 650 | *** Messages for Configuration Data Maintenance Using API |
| 651 | No description exists for dependency & (internal: &) |
| 652 | No source code exists for dependency & (internal: &) |
| 653 | No documentation exists for dependency & (internal: &) |
| 654 | No dependency exists with the name & (internal: &) |
| 700 | There are no configurable objects |
| 701 | Configuration profile for material & not yet created |
| 702 | Configuration profile for material & already created |
| 703 | Material & has not yet been created |
| 704 | Material & is not defined for variant configuration |
| 705 | There are no other configurable objects |
| 706 | Class & & does not exist |
| 707 | Class & & is not active |
| 708 | Class & & is not valid |
| 710 | Enter a profile name |
| 711 | Enter a different profile name |
| 714 | Select one profile only |
| 715 | Profile & for material & is in use |
| 716 | Date & was used from change number |
| 717 | Valid-from date is in the past |
| 718 | Enter a change number |
| 719 | You are not authorized for objects of class type & |
| 720 | Select one of the configured objects |
| 721 | Class type & not defined |
| 722 | Class type & is not defined for variant configuration |
| 723 | Enter a class type |
| 725 | Class type & not created |
| 726 | & is the first profile selected for processing |
| 728 | No more profiles were selected for processing |
| 729 | Select a profile |
| 730 | Select a profile |
| 731 | Class type & cannot be used for materials |
| 733 | Status & is not defined for materials |
| 735 | Class type & cannot be used for general maintenance task lists |
| 736 | Status & not supported for standard networks |
| 737 | No configuration profiles exist for change number & |
| 738 | Profile & for std network & & is in use and cannot be deleted |
| 739 | Enter a BOM application |
| 740 | Configuration profile for material & created |
| 741 | Configuration profile for material & changed |
| 742 | No changes were made to configuration profile for material & |
| 743 | Configuration profile for standard network & & created |
| 744 | Configuration profile for standard network & & changed |
| 745 | No changes were made to configuration profile for standard network & & |
| 746 | Change number & does not exist |
| 747 | Changes on & only allowed with change number & |
| 748 | Change number & does not allow changes to object dependencies |
| 749 | Object dependency has no content |
| 750 | There are no configured objects for material & |
| 751 | No configured objects exist for standard network & & |
| 752 | Configuration profile for material & not valid on & |
| 753 | Configuration profile for standard network & & not valid on & |
| 754 | Class & & set for configurable material |
| 755 | No change number found for material & |
| 756 | No change number found for standard network & & |
| 757 | Order BOMs already created for profile & |
| 758 | Please check your settings for the BOM explosion result |
| 759 | & not defined as a configurable object |
| 760 | The maximum number of alternative sessions has been reached |
| 761 | You are not authorized for these class types |
| 762 | Organizational area & not defined for class type & |
| 763 | Released status for profile & withdrawn |
| 764 | Profile name & already used elsewhere |
| 765 | You cannot release the profile until you assign a class of class type & |
| 766 | Date shift not allowed for material & profile & |
| 767 | Date shift not allowed for standard network & & profile & |
| 768 | Enter the BOM application first |
| 769 | You have no authorization for variant class types |
| 770 | Configuration profile for standard network & & not yet created |
| 771 | Configuration profile for standard network & & already created |
| 772 | You have no authorization for standard network & & |
| 773 | Standard network & alternative & does not yet exist |
| 774 | Standard network & locked by user & |
| 775 | Standard network cannot be locked for technical reasons |
| 776 | You do not have authorization to choose a profile with class type &1 |
| 780 | Configuration profile for material & has already been processed |
| 781 | Configuration profile for standard network & & has already been processed |
| 790 | Configured objects - you cannot change the setting "sales order" |
| 791 | Configured objects - you cannot select "sales order" |
| 792 | Multilevel configured objects - You cannot change "multilevel" setting |
| 793 | Configured objects - you may no longer be able to change the setting |
| 794 | Configured objects - you cannot change "Sales order multilevel" setting |
| 795 | Single-level configured objects - you cannot select "None" |
| 799 | & & & & |
| 803 | Class type & cannot be used for general maintenance task lists |
| 804 | General maintenance task list & is locked by user & |
| 805 | Status & not defined for general maintenance task lists |
| 806 | General maintenance task list & does not yet exist |
| 807 | Confign profile for general maintenance task list & & not yet created |
| 808 | You have no authorization for gen. maintenance task list & & |
| 809 | No change numbers found for general maintenance task list & & |
| 810 | Date shift not allowed for general maintenance task list & & profile & |
| 811 | Configuration profile for GM task list & & is not valid on & |
| 812 | The general maintenance task list cannot be locked |
| 813 | Configuration profile already exists for for GM task list & & |
| 814 | There are no configured objects for GM task list & & |
| 815 | Profile & for general task list & & is in use and cannot be deleted |
| 816 | Configuration profile created for general maintenance task list & & |
| 817 | Configuration profile for general maintenance task list & & changed |
| 818 | No changes were made to configuration profile for general task list & & |
| 819 | & & & & |
| 820 | Configuration profile for general task list & & has been processed |
| 823 | Class type & cannot be used for model service specifications |
| 824 | Model service specification & locked by user & |
| 825 | Status & is not defined for model service specifications |
| 826 | Model service specification & does not exist |
| 827 | Configuration profile for model service spec. & not yet created |
| 828 | You have no authorization for model service spec. & |
| 829 | No change numbers found for model service specification & |
| 830 | Date shift not allowed for model service specification & profile & |
| 831 | Configuration profile for model service specification & not valid on & |
| 832 | Model service specification cannot currently be locked due to the system |
| 833 | Configuration profile for model service specification & already created |
| 834 | No configured objects exist for model service specification & |
| 835 | Profile & for model service spec. & is in use and cannot be deleted |
| 836 | Creating configuration profile for model service specification & |
| 837 | Changing configuration profile for model service specification & |
| 838 | Configuration profile for model service specification & was not changed |
| 840 | Configuration profile for model service spec. & already being processed |
| 841 | BOM application that supports Sales Order (SET) scenario has been set. |
| 842 | Enter a BOM Application for the Sales Order (SET) scenario. |
| 850 | ** Configurator API Messages |
| 851 | Read characteristics of instance & |
| 860 | Order BOM and sales order settings not allowed |
| 861 | Check your settings for the order BOM |
| 862 | Order BOM not allowed if no BOM explosion |
| 863 | Sales order not allowed if no BOM explosion |
| 865 | Check your settings for the sales order |
| 868 | Maintenance not possible, because sales order is not selected |
| 869 | Maintenance not possible, because order BOM is not selected |
| 870 | Start with "Configuration structure" not possible: select first |
| 871 | Start with "Result" not possible: select first |
| 872 | Start with "Master data" not possible: select first |
| 873 | Design & already used in objects assigned to other classes |
| 874 | Alternative language not defined |
| 875 | Status & not defined for configuration profiles for object & |
| 878 | Configuration structure screen not allowed for confign browser setting |
| 882 | "Configuration structure" not allowed, because "Confign browser" is set |
| 884 | Error checking or deleting interface design |
| 885 | Interface design applied from material &2 |
| 886 | Interface design not applied from material &2 |
| 887 | Maintenance in sales order is only allowed for result-oriented order BOMs |
| 890 | Configured objects: moving may cause inconsistencies |
| 891 | Processing mode of child contraints has been changed. |
| 892 | Changing the child constraints has caused a syntax error. |
| 989 | Entry in & does not exist! |
| 990 | Display call characteristics |
| 991 | Display call characteristic values |
| 992 | Display call database fields |
| 993 | Display call formulae |
| 998 | No errors found |
| 999 | Internal error $$$$ |