CX - Nachrichten f�r Konfigurationsprozess
The following messages are stored in message class CX: Nachrichten f�r Konfigurationsprozess.
It is part of development package CU in software component LO-VC. This development package consists of objects that can be grouped under "Variant Configuration".
It is part of development package CU in software component LO-VC. This development package consists of objects that can be grouped under "Variant Configuration".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ******** Configuration process ****************************************** |
| 001 | Class "&1/&2" does not exist |
| 002 | Material "&" does not exist |
| 003 | No bill of material exists for material "&" |
| 004 | Material "&" is not configurable |
| 005 | No configuration profile selected for configurable object & |
| 006 | Configuration for order "&1 &2" is locked |
| 007 | Object "&" is not compatible with this configuration |
| 008 | Material "&" copied from configured material |
| 009 | You must specify a configurable material for this function |
| 010 | No characteristics defined for class "&1/&2" |
| 011 | Configuration for order "&" posted |
| 012 | Configuration for order "&" is unchanged |
| 013 | Configuration is locked |
| 014 | Configuration is incomplete |
| 015 | Material '&' cannot be configured independently |
| 016 | No configurable material selected |
| 017 | Material "&" is not configurable |
| 018 | BOM for material "&" is inactive |
| 019 | No characteristics exist for material "&" |
| 020 | Order "&1" item "&2" does not exist |
| 021 | Order "&1" item "&2" not configured |
| 022 | Material "&1" plant "&2" does not exist |
| 023 | Material "&" not configured |
| 024 | Enter order and item |
| 025 | Order "&" does not exist |
| 026 | Item "&1" does not exist in order "&2" |
| 027 | Select an object |
| 028 | Selected object cannot be used to find objects |
| 029 | Item "&" cannot be deleted |
| 030 | Material "&1" not classified using class type "&2" |
| 031 | Document "&1" not classified using class type "&2" |
| 032 | No application maintained for material "&". |
| 033 | Material "&" not classified |
| 034 | Document "&" not classified |
| 035 | Production order &1 item &2 does not exist |
| 036 | Production order &1 item &2 was not configured |
| 037 | Prod. order configured from sales order &1 item &2 |
| 038 | Configuration is incomplete |
| 039 | Select a BOM item for this function |
| 040 | Maintaining order BOM for order "&1 / &2" |
| 041 | Value assignment only possible in result mode |
| 042 | No configuration profile maintained for the selected object |
| 043 | The chosen object is not consistent |
| 044 | Function only supported for material or document |
| 045 | Documents not currently supported |
| 046 | Configuration is inconsistent |
| 047 | Configuration is consistent and complete |
| 048 | Function cannot be executed for selected object |
| 049 | Order &1 / &2 has been cancelled |
| 050 | You cannot assign characteristic values |
| 051 | You cannot assign values to item '&' |
| 052 | Characteristics may be allowed after you select a component |
| 053 | You cannot assign characteristic values to '&' in this application |
| 054 | Find object function is only allowed for a class item |
| 055 | Change number '&' does not exist |
| 056 | Equipment & does not exist |
| 057 | Equipment refers to a non-configurable material |
| 058 | Material & copied from equipment |
| 059 | Select the assembly where you want to insert the item |
| 060 | No task list found for material &1 plant &2 |
| 061 | Material '&' is not a component of the BOM |
| 062 | Sales document &1 is currently being processed by &2 |
| 063 | The clipboard contains no items |
| 064 | The BOM of the selected component cannot be exploded |
| 065 | BOM for material & already exploded |
| 066 | Language & is not defined |
| 067 | BOMs for document item &1/&2 are currently being processed by &3 |
| 068 | Process order &1 and item &2 with transaction &3 |
| 069 | Item & is already active |
| 070 | Settings in the configuration profile do not support this function |
| 071 | Change number & cannot be used |
| 072 | Selected item cannot be instantiated |
| 073 | Sold-to party does not exist |
| 074 | There is no entry for instance & in either INOB or IBase |
| 075 | Instance & has classification but no configuration |
| 076 | Change number is not valid |
| 077 | BOM has a history requirement - enter a change number |
| 078 | Error while pasting to the clipboard |
| 079 | Material & was not instantiated |
| 080 | Material & was not fixed |
| 081 | You cannot unfix the BOM |
| 082 | Material & is already fixed |
| 083 | Copying an unspecialized class item is not possible |
| 084 | Cutting an unspecialized class item is not possible |
| 085 | No classification values assigned to material &, class type & |
| 086 | '&' not found |
| 087 | Search was Terminated |
| 088 | Item & / & cannot be fixed |
| 089 | You cannot fix this item |
| 090 | Source & for material does not exist |
| 091 | Plant &1 not maintained for template &2 |
| 092 | Material & already has an instance |
| 093 | '&' Found - & Hits |
| 094 | Maintain the order BOM for order item &1/&2 (reference) |
| 095 | Order BOM processing not possible - owner &1 not allowed |
| 096 | Configuration is not possible without a plant |
| 097 | Configuration is not possible without a quantity |
| 098 | Fixed assemblies are being reconfigured |
| 099 | Displayed order BOM will not be saved |
| 100 | Configuration browser cannot be opened due to OCX problem |
| 101 | Please select a configuration result |
| 102 | Configuration results cannot be determined - language &1 |
| 103 | Overflow during quantity calculation for BOM item &2 in &1 |
| 105 | No configuration process running |
| 110 | You cannot exit the configuration |
| 111 | BOM for material '&' does not exist or cannot be exploded |
| 112 | '&' is an assembly header |
| 113 | Selected assemblies have been exploded |
| 114 | Routing for material '&' does not exist or cannot be exploded |
| 115 | Error when exploding the task list |
| 116 | Error calling the configuration browser |
| 120 | Error displaying or loading the start logo |
| 126 | Configurations &1 and &2 are different (&3) |
| 130 | Interface design '&' can no longer be used and will be deleted |
| 131 | No authorization for maintaining interface design |
| 141 | Selected BOMs have been fixed |
| 142 | Enter a change number or a date |
| 150 | Modeling error: multi-level planned/prod. order in set processing |
| 151 | Material variant & reset |
| 153 | Material variant structure & reset |
| 160 | Material & is used multiple times with different BOMs |
| 161 | Material & is used more than once with different assigned values |
| 164 | Item & cannot be used for order BOMs |
| 165 | Selected item cannot be instantiated |
| 166 | Industry sector & is not allowed |
| 167 | Material type "&" is not allowed |
| 168 | Settings in configuration profile do not allow this function |
| 169 | There is already a material variant for material & |
| 170 | Material & is configurable - enter a material type |
| 175 | You cannot position the cursor on material '&' |
| 190 | Material &1 is not maintained for plant &2 |
| 197 | &1 &2 has not been created |
| 198 | &1 &2 already exists |
| 199 | &1 &2 does not exist |
| 200 | &1 &2 is being processed by &3 |
| 201 | Error locking &1 &2 |
| 202 | &1 &2 has already been processed |
| 203 | Date & copied from change number |
| 204 | Valid-from date is in the past |
| 205 | You are not authorized to maintain table structures |
| 206 | & contains invalid characters |
| 207 | No authorization for maintaining &1 &2 |
| 208 | Status &1 not allowed for &2 |
| 209 | Group & does not exist |
| 210 | Enter a language |
| 211 | You are not authorized to give authorization & |
| 212 | Characteristic &1 being processed by &2 |
| 213 | Error locking characteristic & |
| 214 | Using characteristic &1 when &2 not permitted |
| 215 | Use of reference characteristic & not supported |
| 216 | No characteristics exist for &1 &2 |
| 217 | Value assignment alternative &1 contains alternative &2 |
| 218 | Characteristic & is marked for deletion |
| 219 | Description in language & already in the overview |
| 220 | No descriptions maintained for &1 &2 |
| 221 | Select the end of the block |
| 222 | Select the descriptions you want to delete |
| 223 | Select the characteristics to be deleted |
| 224 | Select the characteristics to be moved |
| 225 | Internal error &1 &2 &3 |
| 226 | Character "&1" cannot be used in a &2 |
| 227 | &1 &2 is not valid on &3 |
| 228 | Characteristic & does not exist |
| 229 | Not all characteristics of template &1 are valid on &2 |
| 230 | Characteristic &1 in table structure &2 cannot be deleted |
| 231 | Characteristic &1 in function &2 cannot be deleted |
| 232 | Table & is used in object dependencies |
| 233 | Function & used in object dependencies |
| 234 | Change number & does not exist |
| 235 | Enter & |
| 236 | Function module & does not exist |
| 237 | Function can only be released if function module exists |
| 238 | You can only release the function if function module is activated |
| 239 | Function cannot be released - check function module interface |
| 240 | Released status of function has to be canceled |
| 241 | Created &1 &2 |
| 242 | &1 &2 changed |
| 243 | &1 &2 is deleted |
| 244 | Changing characteristics for &1 &2 requires change numbers |
| 245 | &1 cannot begin with "&2" |
| 246 | Specify either ascending or descending order |
| 247 | Specify either ascending or descending order |
| 248 | Dependency status "&1" from dependency &2 not defined |
| 249 | Value assignment alternative &1 table &2 used in object dependencies |
| 250 | Value assignment alternative &1 function &2 used in object dependencies |
| 251 | You are not authorized to maintain table "&" |
| 252 | You are not authorized to maintain tables |
| 253 | You cannot use change number & to overwrite characteristics |
| 254 | &1 &2 can only be deleted with a change number |
| 255 | You can only change the table line with a change number |
| 256 | On &1 you can only change the table line with change number &2 |
| 257 | Table accesses for inference of values defined ambiguously |
| 258 | No inconsistences found in table entries |
| 259 | Inferred values with table accesses defined ambiguously |
| 260 | Characteristic & appears in overview |
| 261 | Characteristic &1 with format &2 cannot be used in &3 |
| 262 | Please enter exactly one object (table, function, or sort sequence) |
| 263 | No table lines found to match filter |
| 264 | You are not authorized to maintain functions |
| 265 | You are not authorized to maintain sort sequences |
| 266 | Not all table lines could be standardized |
| 267 | Table & is not released |
| 268 | No change number exists for &1 &2 |
| 269 | Number of values for characteristic & not restricted |
| 270 | At least two lines in the table contain the same values |
| 271 | Several values entered for single-value characteristic &1 in line &2 |
| 272 | No value found for characteristic &1 in table line &2 |
| 273 | Restrict allowed values - approx. &1 (>&2) combinations |
| 274 | Number of combinations is & - restrict allowed values |
| 275 | Table entries already standardized |
| 276 | Dependencies can only be allocated to valid combinations |
| 277 | Line &1 not found in table &2 |
| 278 | Characteristic &1 not found in table &2 |
| 279 | Create table structure & - basic data required |
| 280 | Processing of &1 &2 &3 started |
| 281 | Processing of &1 &2 &3 started with change number &4 |
| 282 | Processing of &1 &2 &3 successfully completed |
| 283 | Processing of &1 &2 &3 with change number &4 successfully completed |
| 284 | Processing of &1 &2 &3 terminated due to error |
| 285 | Export not possible: more than one value maintained for char. &1 line &2 |
| 290 | Error while maintaining object dependencies - &1 &2 &3 &4 |
| 300 | Table &1 - &2 |
| 301 | Function &1 - &2 |
| 302 | &1 &2 |
| 310 | Error updating bill of material (see application log SLG1) |
| 311 | An order BOM already exists for item & |
| 320 | Date from serial number & cannot be transferred |
| 321 | Date &1 was transferred from serial number &2 |
| 330 | Check status & & & |
| 331 | Status is "Released" |
| 332 | Status is "Incomplete" |
| 333 | Status is "Locked" |
| 401 | Class &1 &2 does not exist |
| 402 | Instance for &1 &2 &3 could not be created |
| 450 | Interval for IB_SYM_ID does not exist yet |
| 470 | Changes to the BOM by the user will be ignored |
| 500 | Value "&1" of characteristic &2 does not exist in line &3 |
| 501 | No changes to variant tables found with change number & |
| 600 | Variant table & created |
| 601 | Variant table & changed |
| 602 | Variant table & not changed |
| 603 | Runtime object for table & activated |
| 604 | Runtime object for table & deactivated |
| 605 | Runtime object for table & is already activated |
| 606 | Runtime object for table & is already deactivated |
| 607 | Entries in variant table & deleted |
| 608 | Characteristic &1 is still used in table &2 |
| 609 | Table & still contains lines |
| 610 | Database table & does not exist |
| 611 | Database table & has not active version |
| 612 | Database table &1 has no field &2 |
| 613 | Internal error - duplicate root instance |
| 614 | Field &1 from database table &2 cannot be assigned |
| 615 | Format &1 not compatible with data type &2 |
| 618 | Characteristic &: Value '&' does not exist |
| 620 | Database table & could not be linked to variant table |
| 621 | You are not authorized to activate the link to database table & |
| 622 | Deleting field assignments |
| 623 | No characteristics and field assignments are maintained |
| 624 | Field assignments are incomplete |
| 625 | Deactivating link to database table |
| 626 | Database field & is assigned to several characteristics |
| 627 | Assign a database table first |
| 630 | You do not have authorization &1 to maintain entries in table &2 |
| 631 | Table & is not released for maintenance |
| 632 | Maintain characteristics for the table |
| 640 | No database table is assigned to variant table & |
| 641 | Link to variant table & is not active for your database table |
| 642 | No characteristic is assigned to key field &1 in database table &2 |
| 643 | Entries in variant table & are maintained with engineering change mgmt |
| 644 | Database table already contains entries |
| 645 | Name of database table & is not in the customer name range |
| 650 | Runtime object for variant table & selected for regeneration |
| 651 | Link between variant table and database table cannot be changed |
| 660 | A maximum of 99999 different value combinations is allowed |
| 680 | Planning table & has been created |
| 681 | Planning table & has been changed |
| 682 | Planning table & has not been changed |
| 683 | Combination is used in statistics and cannot be deleted |
| 687 | Entries in planning table & deleted |
| 690 | Use transaction & to maintain variant tables |
| 691 | Use transaction & to maintain planning tables |
| 692 | New engineering change management is not yet released for variant tables |
| 693 | Column for characteristic & is empty |
| 694 | Column for characteristic & does not have a consistent entry in all lines |
| 700 | Internal error - tables &1 &2 |
| 701 | Internal error - table &1 - entry &2 does not exist |
| 702 | Internal error - instance & was not changed |
| 703 | Internal error - instance & was changed |
| 704 | Internal error - change to class type in instance & not allowed |
| 705 | Internal message - configuration required |
| 706 | Internal message - configuration optional |
| 707 | Internal error - nested KMAT hierarchy SELF = &1 PARENT = &2 ROOT = &3 |
| 708 | Internal error - instance & is not ROOT in configuration |
| 709 | Internal error - object &1 &2 cannot be ROOT of a nested KMAT |
| 710 | Internal error - external number assignment for instance & |
| 712 | Internal error - object was not entered |
| 713 | Internal error: Object type KMAT_NST not allowed as ROOT instance |
| 714 | Internal error: Owner &1 &2 does not exist |
| 715 | Internal error: Temporary CUOBJ &1 &2 &3 |
| 716 | Internal error: Instance subordinate to object type is not KMAT_NST |
| 717 | Internal error: ROOT-OBTAB &1 is not allowed for multilevel configuration |
| 718 | Internal error: Temporary node number of BOM item &1 |
| 719 | Internal error: Duplicate entries INOB &1 &2 |
| 720 | Internal error: Nested KMAT entry PARENT &1 does not exist |
| 721 | Internal error: recursive parent |
| 722 | Internal error - nested KMAT object &1 <> ROOT object &2 |
| 800 | Limited explosion not possible - &1/&2 is still saved in the old tables |
| 801 | Configuration cannot currently be saved |
| 802 | Change the configurator call (see mail of March 3 98) |
| 805 | No authorization for class type & |
| 850 | Error when reading table IBIN from the archive |
| 851 | No valid IBIN entry found |
| 852 | Inconsistent IBase data |
| 855 | Editing of order subitem causes inconsistent system behavior |
| 870 | No classification data or an error occurred when reading the classificatn |
| 895 | Class &1 and/or class type &2 cannot be changed |
| 898 | Variant Configuration is not yet enabled in S/4 HANA Cloud Edition |
| 899 | Transaction currently locked by development |