DBMAN - Data Manager Message Class

The following messages are stored in message class DBMAN: Data Manager Message Class.
 It is part of development package RSDD in software component BW-BEX-OT. This development package consists of objects that can be grouped under "BW: Data basis data manager".
Message Nr ▲
Message Text
001********** RSDRC ***********
002InfoObject &3 requested but is not contained in InfoProvider &4
003Fiscal variant not defined correctly
006....removed.....
010***** real-time (transactional) InfoCubes *****
011InfoCube &1 not real-time enabled
012Real-time request &2 (InfoCube &1) cannot be locked
013InfoCube &1 is not in "real-time mode". Change to this mode first
014InfoCube &1 was aggregated. Read request cannot be executed
015The aggregates of &1 were compressed. Data package is not consistent
016InfoCube &1 cannot be filled in real-time mode
017&1 is not an InfoCube (Type &2)
018Real-time request &2 of the InfoCube &1 was closed
019InfoCube &1 was switched to load mode
020Metadata error occurred in &1 &2: &3
021Internal error in provider &1: &2
022Error occurred when writing file &1. Reason code: &2
023Invalid logical file name &1 for download
024Non-cumulative initialization is not possible in "real-time mode"
025Internal error while updating time stamp of real-time request
026Change to content of Infocube &1 is incompatible; restart query
027Data deleted from InfoProvider &1. Read request cannot be executed.
028Data has been deleted from InfoProvider &1.
039********** RSDRI continued, as 900+ is reserved for customers***********
040I_TH_TABLESE and I_TH_INDEXSEL cannot both be filled at the same time
041Call combination not supported. Only read from BWA/SAP HANA with COMMIT.
042Error while determining the package dimension entries
043Historical data can only be loaded in SAP HANA-optimized InfoCubes
044The authorization filter functionality has been deactivated
060Invalid time-reference characteristic for a non-cumulative InfoCube: &1
061Error while changing the number range for dimension &1
062The time characteristic consistency check has produced an error
063Value of characteristic &1 is &2 (constant = &3)
064Request is written using mass writing of data to cube. &2
065Mass writing of data to cube not possible: &1
066No package dimension could be found for cube &1. Error: &2
067Only one ncum-initialization is allowed per characteristic combination
068NLS archives on NCUM provider &1 cannot be read via SQL
069Query on NCUM provider &1 without reading the corresponding NLS archive
080********** NCUM via SQL **************
081Time-characteristic &1 is not mapped by provider &2
082Fiscal variant must be part of the query
083Hierarchy of time characteristics is not correct
084InfoProvider &1 not found
085InfoCube '&1' has a non-supported ncum handling mode: '&2'
086Providers with old and new ncum handling cannot be mixed
098------------------------------------------------------------------------
099& & & &
100System error: & & & &
101System error in Include &1 in line &2
102& & & &
103Update to &1 leads to entries with identical keys
104DB migration to version >= V7.2 is required
105DB parameter DB2_UPDATE_PART_KEY must be set (=ON) for conversion &1
110The master data of InfoObject & is not yet converted
111InfoObject & is constantly set to &. Original criteria were replaced
112Temp. object &1 of type &2 has been deleted successfully
113Temp. object &1 of type &2 could not be deleted
114You are executing a nested query. This is not possible.
115Could not create partition: &1
117No temporary table of type &1 found for reuse
118Virtual InfoProvider &1 cannot be read without a commit
119Read access can only be executed with a commit
120TREX index as a value restriction only possible if accessing BWA/SAP HANA
121Request selection for aDSO not possible. Use request TSN.
122Selection on request TSN for provider &1 not possible. Use request.
130********** MultiProvider Messages *********
131Due to the selection criteria for &, no records were read from &
132Nested MultiProviders: &1 in &2
133- &1 in MultiProvider &2 was modeled in &3 in InfoProvider &4
134- &1: General restriction for InfoProvider &2 not possible
135- &1: this key figure was excluded for InfoProvider &2
136- Access to &1 was excluded
137- Conditions for column &2 are not relevant for InfoProvider &3 due to &1
138- All column restrictions were excluded for InfoProvider &1
139- No key figures from &1 are relevant for the MultiProvider query
140- &1 is set to value &3 for &2 constant
141 &1 &2 &3 &4
142*** MultiProvider &1: InfoProvider &2 ***
143 SAP Note 489135 describes messages in more detail
144InfoProvider &1 omitted due to disjunctive restriction on &2 and &3
145- &1 interpreted for InfoProvider &2 as true key figure
146Parallel processing was terminated. Results in meanwhile: &1 lines
147Parallel processing was cancelled. Intermediate result: &1 kB.
148Caution: Low restriction at &1 MB for intermediate results is active
149The MultiProvider query is executed in parallel (DEGREE = &1)
150The MultiProvider query is executed sequentially (reason: &1)
151Query cannot be materialized. Reason &1. Characteristic &2
153&1 is set as constant in the MultiProvider. A selection will be added
154InfoProvider &1 excluded because of a constant condition
155InfoProvider &1 excluded because of metadata restrictions
156InfoProvider &1 excluded because of pruning based on posted data
157&1 InfoProvider(s) excluded because of pruning (filter = &2)
158Time derivation used for pruning a query on a DSO
159InfoProvider &1 is disabled for reporting
160*** Transactional Infocube ***
161InfoProvider &1 excluded because of pruning related to cold data
162InfoProvider &1 excluded because read access to cold store is disabled
164Pruning for '&1' skipped because of error
165Pruning for '&1', Part-Provider '&2' skipped because of error
200********** Error messages for RSDQ and RSDRD ***************
201The fact table cannot be locked for deletion
202User &1 is not authorized to delete from InfoProvider &2
203InfoProvider & is not active; check the entries
204Table- or file name entry is missing
205Entries deleted successfully
206Error when deleting from the fact table
207Error when reconstructing the resulting fact table
208Too many objects for the list output
209Error when truncating to the fact table
210No entries marked for deletion exist
211A materialization in a table is only possible for BasicCubes
212A backup for the database must be carried out after deletion
213The return to a file on the app. server is only permitted in the backgrnd
214Scheduling cancelled by user
215Error when processing in the background with order: &1
216Job &1 scheduled successfully
217Select at least one InfoObject for output
218Periodical scheduling changed to non-periodical
219Transaction not possible for MultiCubes
220InfoCube contains too many characteristics. Make a preselection.
221Enter a report name
222It is not possible to save variants
223Table name &1 is too long (4-17 characters permitted)
224Table name was changed to &1 (capital letters only)
225Selective deletion only possible for InfoCubes and DataStore objects
226This type of InfoProvider may not be stored in a table
230Error in function module &1 for command &2
231Dimension &1: DIMID &2 and &3 have same characteristic values
232Dimension &1: No duplicates exist
233Dimension &1: DIMID &2 is not posted in InfoCube
234Function not supported by this DB system at this time
235This function is only permitted for Basic and aggregate Cubes
236Dimension &1 is valid for Basic and aggregate Cube. Deletion not possible
237&1 is a line item dimension: Changes not possible
238Dimension &1: &2 DIMIDs in total have not been posted in the Infocube
239Dimension &1: &2 DIMIDs deleted in total
240Dimension &1: &2 DIMIDs in total posted more than once in the InfoCube
241Selections for characteristic &1 could not be checked
242The data from the InfoProvider &1 involved could not be checked
243Restrictions on audit characteristics are not allowed
244Restrictions on time char. are not allowed for inventory InfoCubes
245Overlap between deletion criteria and archiving criteria
250********** Error message for RSDRS ***************
251Due to cube &1 being locked, query cannot be executed at the moment
252Result invalid. Reorganization occurred during processing.
253Table &1 is not available on the database
254Table &1 already exists on the database
255A DDIC structure or table already exists with the name &1
256Error in SQL Statement: &1 &2
257SQL Error: &1 &2 &3
258The generated statement is too long
259Unknown error in SQL interface
260Result of query in table &1 is invalid
261Result contains currency key figures in internal and external format
262ABAP SQL Error: &1
275********** Error Messages RSDV ***************
276The fields for maintaining the validity slice are not yet available
277Function can only be executed for InfoCubes with non-cumulatives
278Invalid mode for updating the validity slice
279Non-permitted data entry
280Non-permitted format for the relative data
281Active version of InfoCube &1 not available
282A new value was added to the validity slice
283The validity interval has the initial value as lower limit
284Data of InfoCube &1 is potentially incorrect, time dimension inconsistent
285User-specified validity ignored as it would shrink the overall interval
300********** Error Message RSDR (Virtual Cubes) ***************
301ERROR: & & & &
302REMOTE-ERROR: & & & &
303Error determining attribute &1
304Error determining the SID of compounded characteristic &1
305Error reading the data of InfoProvider &1
306Cannot materialize result for Provider &1
307Unspecific error when reading data for virtual InfoProvider
308Error occurred while determining target system for the logical system &1
309Missing mapping for characteristic &1 of InfoProvider &2
325********** Error Messages RSDRO ***************
326DataStore object &1 does not exist
327Error when writing data to DataStore object: &1
328Activation error: Action &1 table &2
329Extraction mode not allowed: &1. Only I, D and F allowed
330Extraction error. Routine: &1 Command: &2
331The contents of DataStore &1 have changed (new &2, changed &3)
332Requested field &1 does not exist in DataStore object &2
333Value &1 of &2: SID entry does not exist
334&3 SID entries for characteristic &1 (Basis: &2) created
335Generation error. Routine: &1 Command: &2
336Activation error. Routine: &1 Command: &2
337Update program &1 for ISource &2 generated successfully
338Could not generate update-program &1 for ISource &2
339Activation-program &1 generated successfully
340Could not generate activation program &1
341Value &1 for characteristic &2 is invalid
342Error occurred when deleting the contents of DataStore &1 (type: &2)
343Error when moving or checking the SID (see previous messages)
344DataStore object &1 not configured for BEx Reporting
345Filter on attribute of &1 filters charac. values without master data
346Characteristic &1 (Basis &2): &3 entries incorrect
347Most-Recent-Reporting is no longer supported
350 ********** Error Message RSCONDENSE **************
351Request &1 was summarized correctly
352Nothing to do for request &1 (request is empty)
353You tried to initialize an entry more than once
354Data in request 0 is inconsistent (several records with identical keys)
355Correctly summarized up until request &1
356The partition for request &1 was not deleted
357The partition for request &1 was successfully deleted
358The primary index on the E table was deleted
359The primary index on the E table was made
360Key figure &1 has invalid aggr. &2
361Cannot determine infinite amount of time for DIMID &1
362The concatenated index could not be created.
363Requested read block for &1 could not be set
364No compression of standard InfoCubes in scale-out systems
365Error during modification of the E fact table
366Error when inserting into the E fact table
367Error when deleting from the E fact table
368Characteristic attribute exists twice
369InfoProvider is already locked by another process
370Summarization not possible during change run
371No requests for summarization are available in cube &1
372Error when checking lock for fact table &1
373Fact table &1 already locked by another process
374Fact table &1 locked by another process
375Compression of MultiProvider (&1) is not defined
376Fiscal year variant (SID &1) has no master data
377Cannot eliminate zero because &1 has aggregate &2
378Prerequisite for successful compression not fulfilled
379Inconsistency in the metadata
380Multiple entries found with NCUMTIM 'unlimited'; compression not possible
381*************** Check-Tool for Condenser
382Scenario &2 (trace &1): correctly carried out
383Scenario &2 (trace &1): error when executing
384Scenario &2 (trace &1): There are different results
385Mass insert of transaction data executed (&1 data records)
386DB Statistics: &1 selects, &2 inserts, &3 updates, deletes &4
387Aggregation run ended successfully
388Mass insert for marker initialization executed (&1 data records)
389Multiple markers have the same key (&1)
390Mass update of transaction data executed (&1 data records)
391Mass upsert of transaction data executed (&1 data records)
392Mass upsert of markers executed (&1 data records)
393Mass insert for markers executed (&1 data records)
394Elimination of zeros executed (&1 data records deleted)
395Mass update of markers executed (&1 data records)
396Compression of InfoCube &1 to request &2
397SID of partitioning column was set to &1
398Statistics updated for table &1
399Statistics update for table &1 terminated with errors
400*********** Error Messages RSDRH **************
401The entry (&1,&2) is missing
402The entry (&1, &2) is redundant
403The entry (&1,&2) is different
404HieSid/Sver: &1 Sid/Returnlevel/Readlevel: &2 Tablnm &3
405Hierarchy buffer has been deleted successfully
406Error when deleting hierarchy buffer
408Errors deleting temporary hierarchy table &1
409Error releasing the name &1 of the temporary hierarchy table
410Hierarchy buffer is already empty
420*********** Error Messages RSDRP ****************
421Errors occurred during parallel processing of query &2, RC: &1
422Internal error &1 during parallel processing of queries, query &2
423Internal error: Non-assigned results structure of a query object
424Internal error:Query handler contains only queries without results struct
425Internal Error: Result of a query that has not ended is being requested
426Cube &1 is temporarily locked
427Kernel error &1 during parallel processing of queries via RFC
428Query &2: Runtime error &1 with parallel processing via RFC
429Internal error: Combination of parameters is no longer valid
430Query &2: Kernel error &1 with parallel query execution
431Parallel processing of query &1 resulted in the following messages:
435*********** Error Messages RSDD_SWITCH_NCUM_HANDLING ************
436No switch needed as not a SAP HANA system
437No switch needed as Cube &1 does not contain non-cumulative key figures
438No switch needed as Cube &1 is not a HANA-optimized InfoCube
439Ref-point update (version &2) is already active for InfoCube &1
440InfoCube &1 is locked
441InfoCube &1 has no compressed data. No updating of ref-point needed
442InfoCube &1 has inconsistent settings for compression in RSMDATASTATE
443Start operation &2 on InfoCube &1
444Error &3 during operation &2 on InfoCube &1
445Operation &2 on InfoCube &1 completed (Count=&3)
446New ncum handling (version &2) is now active for InfoCube &1
447Current DB version does not support reference point update (version &2)
448Entry in packet dimension for 'requid'=&1 and 'rectp'=&2 is missing
449Ref-point update (version &2) must be active for InfoCube &1 first
450*********** Error Message RSDRX **************
451Characteristic &1: Size of X/Y table does not fit P/Q table
452Characteristic &1 is not a basic characteristic
453Characteristic &1 is not time dependent
460*********** NCUM pushdown **************
461NCUM pushdown for &1: provider type is not supported
462NCUM pushdown for &1: key figure &2 has unsupported aggregation 'FIRST'
463NCUM pushdown for &1: no SID for characteristic &2
464NCUM pushdown for &1: navigation attribute &2 is not provided
465Opening (&1) and closing balances (&2) cannot be processed in same query
500Cannot specify restrictions
501ORACLE: InfoCube &1 contains data and cannot be partitioned
502ORACLE:
503ORACLE:
504ORACLE:
505ORACLE:
506ORACLE:
507ORACLE:
508ORACLE:
509ORACLE:
510ORACLE:
511ORACLE:
512ORACLE:
513ORACLE:
514ORACLE:
515ORACLE:
516ORACLE:
517ORACLE:
518ORACLE:
519ORACLE:
520ORACLE:
521ORACLE:
522ORACLE:
523ORACLE:
524ORACLE:
525ORACLE:
526ORACLE:
527ORACLE:
528ORACLE:
529ORACLE:
530ORACLE:
531ORACLE:
532ORACLE:
533ORACLE:
534ORACLE:
535ORACLE:
536ORACLE:
537ORACLE:
538ORACLE:
539ORACLE:
540ORACLE:
541ORACLE:
542ORACLE:
543ORACLE:
544ORACLE:
545ORACLE:
546ORACLE:
547ORACLE:
548ORACLE:
549ORACLE:
550********** Error messages RSCONDENSE **************
551Non-cumulative initialization is not possible with historical data
552Historical data cannot be compressed for aggregates
553INFORMIX:
554INFORMIX:
555INFORMIX:
556INFORMIX:
557INFORMIX:
558INFORMIX:
559INFORMIX:
560Zero elimination switched on
561Loading of historical data switched on
562Zero elimination is not possible for exception aggregation
563INFORMIX:
564INFORMIX:
565INFORMIX:
566INFORMIX:
567INFORMIX:
568INFORMIX:
569INFORMIX:
570INFORMIX:
571INFORMIX:
572INFORMIX:
573INFORMIX:
574INFORMIX:
575********** Error messages RSDU_PART **************
576Deletion of partitions terminated with exception &1
577Partitions deleted successfully
578INFORMIX:
579***** SAP/SYBASE ASE
580SYB: Null elimination failed
581SYB: RSCDS_EXEC_NULLELIM failed &1
582SYB:
583SYB:
584SYB:
585SYB:
586SYB:
587SYB:
588SYB:
589SYB:
590SYB:
591SYB:
592SYB:
593SYB:
594SYB:
595SYB:
596SYB:
597SYB:
598SYB:
599SYB:
600SQL-SERVER:
601SQL-SERVER:
602SQL-SERVER:
603SQL-SERVER:
604SQL-SERVER:
605SQL-SERVER:
606SQL-SERVER:
607SQL-SERVER:
608SQL-SERVER:
609SQL-SERVER:
610SQL-SERVER:
611SQL-SERVER:
612SQL-SERVER:
613SQL-SERVER:
614SQL-SERVER:
615SQL-SERVER:
616SQL-SERVER:
617SQL-SERVER:
618SQL-SERVER:
619SQL-SERVER:
620SQL-SERVER:
621SQL-SERVER:
622SQL-SERVER:
623SQL-SERVER:
624SQL-SERVER:
625SQL-SERVER:
626SQL-SERVER:
627SQL-SERVER:
628SQL-SERVER:
629SQL-SERVER:
630SQL-SERVER:
631SQL-SERVER:
632SQL-SERVER:
633SQL-SERVER:
634SQL-SERVER:
635SQL-SERVER:
636SQL-SERVER:
637SQL-SERVER:
638SQL-SERVER:
639SQL-SERVER:
640SQL-SERVER:
641SQL-SERVER:
642SQL-SERVER:
643SQL-SERVER:
644SQL-SERVER:
645SQL-SERVER:
646SQL-SERVER:
647SQL-SERVER:
648SQL-SERVER:
649SQL-SERVER:
650DB2/UDB: DB statistics created for table &1
651DB2/UDB: DB statistics could not be created for table &1. &2
652DB2/UDB: Indexes for InfoCube &1 could not be repaired. %&2
653DB2/UDB: Cannot specify restrictions
654DB2/UDB:
655DB2/UDB:
656DB2/UDB:
657DB2/UDB:
658DB2/UDB:
659DB2/UDB:
660DB2/UDB:
661DB2/UDB:
662DB2/UDB:
663DB2/UDB:
664DB2/UDB:
665DB2/UDB:
666DB2/UDB:
667DB2/UDB:
668DB2/UDB:
669DB2/UDB:
670DB2/UDB:
671DB2/UDB:
672DB2/UDB:
673DB2/UDB:
674DB2/UDB:
675DB2/UDB:
676DB2/UDB:
677DB2/UDB:
678DB2/UDB:
679DB2/UDB:
680DB2/UDB:
681DB2/UDB:
682DB2/UDB:
683DB2/UDB:
684DB2/UDB:
685DB2/UDB:
686DB2/UDB:
687DB2/UDB:
688DB2/UDB:
689DB2/UDB:
690DB2/UDB:
691DB2/UDB:
692DB2/UDB:
693DB2/UDB:
694DB2/UDB:
695DB2/UDB:
696DB2/UDB:
697DB2/UDB:
698DB2/UDB:
699DB2/UDB:
700DB2-z/OS: &1: SQL error &2
701DB2-z/OS: Error &1 while updating database statistics
702DB2-z/OS: REORG on &1 ended with error code &2
703DB2/390:
704DB2/390:
705DB2/390:
706DB2/390:
707DB2/390:
708DB2/390:
709DB2/390:
710InfoCube &: & missing, & incorrect or initialized, & correct
711InfoCube &: & added, & changed, & unchanged
712InfoCube & is not a non-cumulative InfoCube
713InfoCube & is not a partitioned non-cumulative InfoCube
714Error when checking InfoCube &
715InfoCube &: Partition of & markers should be adjusted
716InfoCube &: Partition of & markers was adjusted
717InfoCube &: Partitions do not need to be adjusted
718Option 'Adjust Values' only when explicitly specifying the InfoCube name
719Choose at least one option
720& complaints(s), & adjustment(s)
721DB2/390:
722DB2/390:
723DB2/390:
724DB2/390:
725DB2/390:
726DB2/390:
727DB2/390:
728DB2/390:
729DB2/390:
730DB2/390:
731DB2/390:
732DB2/390:
733DB2/390:
734DB2/390:
735DB2/390:
736DB2/390:
737DB2/390:
738DB2/390:
739DB2/390:
740DB2/390:
741DB2/390:
742DB2/390:
743DB2/390:
744DB2/390:
745DB2/390:
746DB2/390:
747DB2/390:
748DB2/390:
749DB2/390:
750DB2/400: Summary is carried out with ABAP
751DB2/400: Summary is carried out with Stored Procedure
752Specify a table name first
753Specify the number of records first
754Initialization successfully completed
755Error when creating secondary indexes
756Flat InfoCubes not supported. See SAP Note 2073519.
757Flat InfoCubes not supported for real-time cubes. See SAP Note 2073519.
758Only for use with IBM i (DB2/400)
759No switch needed as cube &1 is not a flat InfoCube
760Error while getting package dimension IDs for compressed records
761Error while reading RSMDATASTATE for InfoCube &1
762No switch possible as multiple compressed movements have the same key
763No compression, ref-point update version 2 is not active for InfoCube &1
764Ref-point update flag set to version &2 for InfoCube &1
765InfoCube &1 is not a flat inventory cube
766InfoCube &1 needs to be converted to ref-point update (version &2)
767Number of records to be converted: &1
768BW queries work correctly without converting InfoCube &1
769BW queries return incorrect results until InfoCube &1 is converted
770Table could not be locked for fast delete
771&1 records should be deleted from table &2
772Deleting data one record at a time can take a long time.
773Do you want to continue? (see SAP Note 1427103)
774DB2/400:
775DB2/400:
776DB2/400:
777DB2/400:
778DB2/400:
779DB2/400:
780DB2/400:
781DB2/400:
782DB2/400:
783DB2/400:
784DB2/400:
785DB2/400:
786DB2/400:
787DB2/400:
788DB2/400:
789DB2/400:
790DB2/400:
791DB2/400:
792DB2/400:
793DB2/400:
794DB2/400:
795DB2/400:
796DB2/400:
797DB2/400:
798DB2/400:
799DB2/400:
800SAPDB:
801SAPDB:
802SAPDB:
803SAPDB:
804SAPDB:
805SAPDB:
806SAPDB:
807SAPDB:
808SAPDB:
809SAPDB:
810SAPDB:
811SAPDB:
812SAPDB:
813SAPDB:
814SAPDB:
815SAPDB:
816SAPDB:
817SAPDB:
818SAPDB:
819SAPDB:
820SAPDB:
821SAPDB:
822SAPDB:
823SAPDB:
824SAPDB:
825SAPDB:
826SAPDB:
827SAPDB:
828SAPDB:
829SAPDB:
830SAPDB:
831SAPDB:
832SAPDB:
833SAPDB:
834SAPDB:
835SAPDB:
836SAPDB:
837SAPDB:
838SAPDB:
839SAPDB:
840SAPDB:
841SAPDB:
842SAPDB:
843SAPDB:
844SAPDB:
845SAPDB:
846SAPDB:
847SAPDB:
848SAPDB:
849SAPDB:
850*********** RSDRI error messages **********
851Value '&1' in field SIGN not permitted
852Value '&1' in field COMPOP not permitted
853Both tables I_TH_SFC and I_TH_SFK are not allowed to be blank
854Parameter &1 cannot be blank
855Cannot store result in table and file at same time
856Data from batch or update process cannot be saved in PC file
857Table name &1 already used in DDIC. Cannot recreate
858Table name &1 already used in DB. Cannot recreate
859InfoCube &1 is in load mode. Transactional write not possible
860CHANM initial in I_TH_SFC not allowed
861CHAALIAS (&1) cannot begin with a number (when saving in table)
862Restrictions in I_T_RANGE and I_TH_TABSEL for &1 not possible
863Key figure &1 unknown in InfoProvider &2
864KYFALIAS (&1) cannot begin with a number (when saving in table)
865Aggregation &1 not allowed on DB (key figure &2)
866KYFNM initial in I_TH_SFK is not allowed
867Error when accessing function &1 (SUBRC=&2)
868Data from InfoProviders cannot be saved in table
869No authorization ('&1') for access (InfoProvider &2, user &3)
870Selection of characteristic &1 is not possible: Not in InfoProvider &2
871Aggregation &1 for &2 not poss. since other key figure will not be aggr.
872A hierarchy selection with EXCLUDING is not allowed (characteristic: &1)
873Invalid hierarchy selection for &1: '&2' not a valid hierarchy
874Invalid hierarchy selection for &1: '&2' invalid node value
875Hierarchy node &3 (characteristic &1, hierarchy &2) unknown
876No authorization for the node &3 (characteristic &1, hierarchy &2)
877Reading &1 explicity from an aggregate (&2) is not permitted
878Restriction to &1 not permitted for InfoProvider &2 (type &3)
879Duplicate entries in range table for characteristic &1
880Non-permitted key figure &1 in I_TH_SFK
881Non-permitted characteristic &1 in I_TH_SFC
882Nested call of RSDRI_INFOPROV_READ
883DataStore delta can only be read for providers with change log
884Characteristic &1 not found in InfoProvider &2
885The ODS change log cannot be read with aggregation
886Result cannot be saved to table during read without commit
887Read without commit is not supported for non-cumulative key figures
888Characteristic &1 has more than one hierarchy selection
889Incorrect initial value for characteristic &1 in i_t_range
890InfoProvider &1 is not a DataStore
891An explicit selection for InfoProvider &1 is not supported
892Unit &1 missing for key figure &2
893Characteristic &1 exists more than once in query (I_T_SFC)
894Key figure &1 exists more than once in query (I_T_SFK)
895Reference InfoProvider is empty ==> (Random) test does not make sense
896Could not save InfoProvider data in the TREX index
897Index name &1 is already in use in BWA/SAP HANA. Cannot be created again.
898Index name &1 contains the illegal symbol '/' and thus cannot be created
899Could not save InfoProvider data in the BWA/SAP HANA index
900*********** HPA Error Messages **********
901Error &1 has occurred in the BWA/SAP HANA server
950***** RSAPO Messages *****
951Writing to the InfoCube failed due to duplicates
952Syntax error (writing InfoCube): Rows &1 - &2
953Syntax error (writing to InfoCube, template): Rows &1 - &2
954Error during generation of InfoCube write program (error: &1)
955Syntax error (&3): Rows &1 - &2
956Syntax error (&3, template): Rows &1 - &2
957Error during generation (error: &1, template: &2)
958Lock problem: Inclusion of new SIDs from request &2 (InfoCube &1)
959&1 is not an InfoCube
960InfoCube &1 is 'real-time' and cannot be written with this method
961Error during rollback of request &2 in InfoCube &1 (Error: &3)
962&1 is neither an InfoCube nor an aggregate
963Error while writing the RSADMIN parameter &1 to Customizing
964Transfer any existing RSADMIN parameters to Customizing
965RSADMIN Parameter &1: Value "&2"
966RSADMIN Parameter &1 in InfoCube Definition transferred from &2
967Obsolete RSADMIN parameter &1 deleted
968Record contains time reference char. (NCUMTIM) with value 'unlimited'
969Table &1 is not active. Re-activate InfoCube &2
970Staging table &1 is not empty. Wait until loading has completed
971Unable to determine the delta
972Stock initialization is only possible with non-cumulative InfoCubes
973Writing with delta determination is not possible in the update task
974The staging table cannot be generated in the update task
975Error while deleting package &1 from table &2
976&1 is part of a HybridProvider and cannot be filled directly
977No referential integrity set for filter on attribute &1
980No change authorization (S_DEVELOP)
Privacy Policy