DMC_GENERAL - MWB: General Messages
The following messages are stored in message class DMC_GENERAL: MWB: General Messages.
It is part of development package CNV_DMCM in software component CA-LT. This development package consists of objects that can be grouped under "Data Mapping and Conversion: Maintenance".
It is part of development package CNV_DMCM in software component CA-LT. This development package consists of objects that can be grouped under "Data Mapping and Conversion: Maintenance".
Message Nr ▲ | Message Text |
|---|---|
| 000 | |
| 001 | ID &1 of access plan / collective access plan / precalculation is invalid |
| 002 | No tables exist for mass transfer &1 with status "Calculated" |
| 003 | Start of assignment of sequence numbers for ID &1 on &2 at &3 |
| 004 | Output list is empty |
| 005 | Sequence numbers have been assigned successfully to the mass transfer &1 |
| 006 | Job to assign sequence numbers for mass transfer &1 finished |
| 007 | Top-level node of sender structure cannot be mapped |
| 008 | Mapping on hierarchy and structure nodes of the recipient not allowed |
| 009 | Parent nodes of sender and receiver nodes are not mapped |
| 010 | Hierarchy of sender structure must be reflected in recipient structure |
| 011 | Sender node has already been mapped to recipient node as SUPPRESS Read |
| 012 | Parent and child sender node mapped as DEFAULT to same receipient node |
| 013 | Sibling sender nodes mapped as DEFAULT to same recipient node |
| 014 | Object &1 can't be processed due to DDIC differences |
| 015 | &1 is no valid value for fixed value &2 |
| 016 | Parameter &1: &2 is not a valid value |
| 017 | You must not specify a package other than &1 |
| 018 | Parameter &1: &2 is not alpanumeric |
| 019 | Non alphanumeric values; data has not been saved |
| 020 | Please enter all fields |
| 021 | Please place cursor on the sender structure |
| 022 | Enter valid split number |
| 023 | Migration Object name &1 in file not expected; expected &2 |
| 024 | No header row found before the nametab rows |
| 025 | Header length too short |
| 026 | This sender structure is already selected as secondary access relation |
| 027 | You are in display mode; switch to edit mode to use this function |
| 028 | No transport request specified - transport cancelled |
| 029 | No mapping has been provided for field &1 of structure &2 |
| 030 | Status cannot be set to 'DONE' because of following reason |
| 031 | Structure relationship &1 - &2 already exists |
| 032 | No valid check table found |
| 033 | Split has been reset; rule assignments are being initialised |
| 034 | Split cardinality changed; Rule assignments are initialised |
| 035 | Rulecall(s) for field &1 have been initialised |
| 036 | Service Destination missing for Remote Service Call in project &1 |
| 037 | Service Destination missing for Remote Service Call in mig. object &1 |
| 038 | No values obtained from the corresponding code list |
| 039 | No valid domain |
| 040 | No domain check values |
| 041 | No Service Interface Method specified |
| 042 | Structure relationship &1 - &2 added |
| 043 | Semantic descriptor has not been specified yet |
| 044 | Aggregated runtime info has been updated for mass transfer &1 |
| 045 | Rule Modeller not available because no view fields have been selected |
| 046 | Data load is not running for mass transfer &1 |
| 047 | Sender container has not been built |
| 048 | Specify the separator value |
| 049 | please select a running batch job activity |
| 050 | Maximum number of scenarios within one project reached |
| 051 | Maintenance of field specific value is possible only by context menu |
| 052 | Message header may only be mapped with top-level sender structure |
| 053 | Single usage descriptor &1 is used multiple times |
| 054 | Formal parameter of semantic descriptor cannot be changed |
| 055 | File &1 does not contain valid entries |
| 056 | Description of &3 changed from &1 to &2 |
| 057 | Differing Master ConvObj; maintenance of translation values not possible |
| 058 | &1 is neither a migration scenario nor a subproject identifier |
| 059 | There is no view available to be deleted |
| 060 | Error copying &1 to &2 |
| 061 | Unknown placeholder(&1) is used in template |
| 062 | Select a row in the grid |
| 063 | Single-usage descriptor &1 cannot be assigned |
| 064 | &1 is no legal value for codelist &2 |
| 065 | Data of RFC connection &1 has been changed; regeneration is required |
| 066 | Function group &1 does not exist in local system |
| 067 | Structure &1 must be deleted as its type has been changed from &2 to &3 |
| 068 | Scheduling of background job in remote system &1 failed |
| 069 | &3 of field &2 in structure &1 has not been inserted into view model |
| 070 | Prefix customizing is locked by user &1 |
| 071 | Suffix customizing is locked by user &1 |
| 072 | Field &2 in structure &1 has to be deleted in advance |
| 073 | Rule template &1 does not exist |
| 074 | &1 &2 already exists |
| 075 | Select subproject |
| 076 | No file has been provided |
| 077 | Sender container has been built |
| 078 | Please choose a valid line |
| 079 | Work in progress |
| 080 | Change of connection type FILE to connection type XML is not permitted |
| 081 | Migration object &1 has been deleted due to changes in table definition |
| 082 | Rule &1 already exists in target object and will not be copied |
| 083 | No usage detected for field &1 |
| 084 | Directory can not be selected, please select only files |
| 085 | File &1 is already assigned to migration object |
| 086 | Imported file &1 can not be removed from migration object |
| 087 | No unused view could be found; please contact SAP for new views |
| 088 | Structure tree type of &3 changed from &1 to &2 |
| 089 | Update rule call: field is initial |
| 090 | Update rule call for field &1: rule call has not been updated |
| 091 | Update rule call for field &1: rule call has not been generated |
| 092 | Update rule call for field &1: semantic descriptor is initial |
| 093 | Please specify format for &1 |
| 094 | &1 has not been found in mapped structure for reciever field |
| 095 | Export par.s must not be evaluated; the assigned values have been deleted |
| 096 | Actual parameter must not be initial |
| 097 | Persistence: Object &1 not available. |
| 098 | Duplication translation value |
| 099 | selected activity will be stopped |
| 100 | No unused view could be found; please contact SAP for new views |
| 101 | Structure tree type of &3 changed from &1 to &2 |
| 102 | Update rule call: field is initial |
| 103 | Update rule call for field &1: rule call has not been updated |
| 104 | Update rule call for field &1: rule call has not been generated |
| 105 | Update rule call for field &1: semantic descriptor is initial |
| 106 | Please specify format for &1 |
| 107 | &1 has not been found in mapped structure for reciever field |
| 108 | Export par.s must not be evaluated; the assigned values have been deleted |
| 109 | Actual parameter must not be initial |
| 110 | Non alphanumeric value |
| 111 | Save the structure relationship data before accessing this functionality |
| 112 | Duplicate translation values; data has not been saved |
| 113 | Invalid length; the length should be &1 |
| 114 | This function is not possible |
| 115 | processes will be stopped |
| 116 | Assign a file to the header structure |
| 117 | Missing file assignment for substructures |
| 118 | No active file assigned to the migration object |
| 119 | Confirm the signature change before proceeding |
| 120 | There are files that have not been validated yet; start the validation |
| 121 | Structure &1 could not be locked |
| 122 | Excel &1, sheet &2: No structure found in source definition |
| 123 | Excel &1, sheet &2: CSV file &3 created |
| 124 | There is not enough free space on the local filesystem |
| 125 | No access to local directory |
| 126 | Excel &1, sheet &2, CSV file &3: No back transfer to project path |
| 127 | Communication with Excel at frontend not possible |
| 128 | Source Excel &1 unreachable |
| 129 | Wrong source Excel &1 |
| 130 | Unknown error at Excel to CSV conversion |
| 131 | The following files could not be reset because they are already imported |
| 132 | No visible node found for field &1 |
| 133 | Microsoft Excel can't be controlled by OLE automation |
| 134 | &1 bytes transferred |
| 135 | Identical sheet name &3 for sheet number &1 and &2 used |
| 136 | Sheet &1 name &2 contains not allowed special characters |
| 137 | Sheet &1 name &2 contains more than 30 characters |
| 138 | There is no sheet name given for sheet &1/&2 |
| 139 | Column name &1 is empty for sheet &2 &3 |
| 140 | Excel file &1 was created |
| 141 | Access plan calc. / data selection job not yet started in sender system |
| 142 | Excel file &1 contains no TRANSLATION sheet |
| 143 | Please complete file selection before proceeding to this step |
| 144 | Block size of portion &1 exceeds &2 bytes |
| 145 | Text is too long with &1 exceeding characters |
| 146 | The following files are processed |
| 147 | ESR Name of &3 changed from &1 to &2 |
| 148 | Migration object with alias &1 does not exist in migr. scenario &2 |
| 149 | Field name is empty |
| 150 | Message cannot be processed; message ID or message type not specified |
| 151 | Log handler does not yet exist |
| 152 | SET_BEHAVIOUR called twice; find caller in file DIR_HOME/LOG_HANDLER |
| 153 | No Application Log exists |
| 154 | Log handler already exists; this error should not occur |
| 155 | For message &1 &2, maximum number of application log entries reached |
| 156 | An application log has already been saved |
| 157 | The selected file path is too long (It should be less than 255 chars) |
| 158 | No application log objects matching pattern &1 exist |
| 159 | For application log object &1, no subobjects matching pattern &2 exist |
| 160 | Log creation mode &1 is invalid (only B, D and I are valid) |
| 161 | Application log problem class &1 is invalid (only 1, 2, 3, 4 are valid) |
| 162 | No reports matching pattern &1 exist |
| 163 | No transaction codes matching pattern &1 exist |
| 164 | Invalid time interval &1 &2 - &3 &4 (start after end) |
| 165 | No users matching pattern &1 exist |
| 166 | Application logs are not being archived |
| 167 | No glossary text for identifier &1 available |
| 168 | A table item with type &1 already exists |
| 169 | Hierarchy of structure &1 (parent &2) changed. |
| 170 | Structure &1 (parent &2) to be moved up or replaced ; backup content |
| 171 | Structure &1 (parent &2) moved down or replaced |
| 172 | Structure &1 (parent &2) moved up or replaced |
| 173 | Entered file does not exist and cannot be opened |
| 174 | Error while reading file |
| 175 | Front end function cannot be used in background |
| 176 | Incorrect front end or error in front end |
| 177 | Incorrect file type passed |
| 178 | Missing authorization to upload file |
| 179 | Error during upload of file |
| 180 | Data in specified file cannot be interpreted |
| 181 | Header information too long; currently restricted to 1023 Bytes |
| 182 | Access to file denied |
| 183 | Dependencies on own object are invalid |
| 184 | File name too long, only &1 characters possible (w/o extension) |
| 185 | Template indicator removed from access plan &1 |
| 186 | Subsequent messages pertain to job &1, job count &2. |
| 187 | The following files are deleted and will be unassigned |
| 188 | Confirm duplicate target values |
| 189 | File &1 is deleted |
| 190 | Application log could not be selected; check your selection |
| 191 | Remove the leading zeroes of the entered value |
| 192 | No variants available for selected object |
| 193 | Job &1 is pending |
| 194 | Not supported file system detected |
| 195 | At first define target structure for source migration object |
| 196 | Target value cannot be initial |
| 197 | File is already imported; function 'Set Active/Inactive' is not allowed |
| 198 | Corresponding value mapping for &1 missing |
| 199 | DDIC CHECK failed for migration object &1 |
| 200 | Error creating folder |
| 201 | Structure missing for Update Set clause |
| 202 | Incomplete "SET" clause |
| 203 | Incomplete "WHERE" clause |
| 204 | Mass Transfer ID &1 is not assigned to target subproject &2 |
| 205 | There is no view available which can be edited. |
| 206 | Please provide a description/View ident/View type for the view |
| 207 | Excel Suffix &1 is already used, please reenter new suffix |
| 208 | View ident &1 is reserved for target structure view modeling |
| 209 | View ident &1 is already used, select a new ident |
| 210 | The destination &1 has been automatically created |
| 211 | Problem table &1 could not be truncated in RFC destination &2 |
| 212 | View &1 could not be created in RFC destination &2 |
| 213 | View &1 could not be activated in RFC destination &2 |
| 214 | No problem table exist for table &1 in RFC destination &2 |
| 215 | Transfer of records for problem table &1 failed (RFC destination &2) |
| 216 | No SPUMG settings found |
| 217 | No Unicode settings available for table &1 |
| 218 | Error occured. Split of precalculation &1 failed |
| 219 | Structure missing for Delete clause |
| 220 | No field found with guid &1 |
| 221 | Function Module &1 doesnot exist in receiver system |
| 222 | Please select another Function Module |
| 223 | Name of function module &1 contains invalid characters |
| 224 | Communication failure: RFC &1 Function Module &2 |
| 225 | System failure: RFC &1 Function Module &2 |
| 226 | Formal parameter &1 of type &2 not supported |
| 227 | No rule settings for mass transfer ID &1 |
| 228 | Rule &1 set for migration object &2, table &3, field &4 |
| 229 | Field &1 (migration object &2, table &3) has rule assigned already |
| 230 | Lock for domain rule assignment activated |
| 231 | &1 Settings available, &2 Rules assinged, &3 Fields skipped |
| 232 | Function module &1 does not exist in syst. specified by RFC connection &2 |
| 233 | Exception raised in application module: &1 |
| 234 | No data passed to function module |
| 235 | Source object &1 not assigned to a mass transfer |
| 236 | Wrong structure relationship for rcv struct &1, relationship type &2 |
| 237 | Remote function call to destination &1 ended with "system failure" |
| 238 | Remote function call to destination &1 ended with "communication failure" |
| 239 | No create or assign authority for authority group &1 |
| 240 | No change authority for authority group &1 |
| 241 | No display authority for authority group &1 |
| 242 | No delete authority for authority group &1 |
| 243 | No execute authority for authority group &1 |
| 244 | Job &1 scheduling not requested |
| 245 | Task &1 extraction failed. Check job name |
| 246 | Could not create configuration guid! |
| 247 | Error while stopping the job: & |
| 248 | Batch request for job & failed. Please see the system log |
| 249 | No "Display Saved Data" authority for authority group &1 |
| 250 | For mass transfer &1, table &2 UPDATE failed: &3 |
| 251 | Specify table name for secondary DB connection |
| 252 | Migration Object name does not end with a valid mass transfer ID (&1) |
| 253 | Name must not start with the character '/' |
| 254 | Table type &1 could not be created |
| 255 | No "Display Saved Data" authority for auth group &1 and table &2 |
| 256 | No "Display Saved Data" authority for table &1 |
| 257 | No "Display Saved Data" authority |
| 258 | Table &1 not found in source system (RFC destination &2) |
| 259 | Structures successfully created |
| 260 | Connection successfully updated |
| 261 | COBJ_GUID missing in table DMC_MT_TABLES - lock not possible |
| 262 | Excel XML connection is already active |
| 263 | Excel XML connection activated |
| 264 | Select a field to edit its file properties |
| 265 | Select a field to edit its texts |
| 266 | Column header of field &1 not found |
| 267 | Group text of field &1 not found |
| 268 | Tooltip of field &1 not found |
| 269 | No text available that meets search criteria |
| 270 | Error occurred while searching for text |
| 271 | Error occurred while trying to edit the text |
| 272 | Sheet name of structure &1 not found |
| 273 | File template successfully downloaded |
| 274 | A file with FILE_ID = &1 does not exist |
| 275 | Access plan calculation for file &1 failed |
| 276 | Structure with DDIC reference can't be created in Excel XML Connection |
| 277 | The length of field &1 was adjusted to the value &2 |
| 278 | Activation not possible. Structure(s) with reference to DDIC available |
| 279 | Error creating collective access plan with ID &1 |
| 280 | Objects to be created already exist for specified tables of MT ID &1 |
| 281 | Function group does not belong to the specified object &1. |
| 282 | &1: Function group &2 excluded from deletion. Its owner is not &3. |
| 283 | Unsupported weak type: &1 |
| 284 | Mig. Object &1: Detected invalid INDX Key Mapping for RELID &2 Comp. &3 |
| 285 | The specified table range leads to too many records and cannot be handled |
| 286 | Error while getting parameters of function &1. |
| 287 | Error while getting function parameters. Please select a valid function. |
| 288 | Error while reading dynpro field values. |
| 289 | 'Application Select' must not be active for root node; check root node |
| 290 | 'Application Select' must be active for structure &1; reason: &2 |
| 291 | 'Application Select' is not active for all subnodes; check subnodes |
| 292 | 'Application Select' is active for parent node;activate AS for childnodes |
| 293 | Error while retrieving 'Application Select' settings from source system |
| 294 | No authorization for accessing source system using RFC connection &1 |
| 295 | Sender system does not support the feature 'Application Select' |
| 296 | Function not possible due to missing mass transfer or alias assignment |
| 297 | Length of key fields exceeds limit for function module target |
| 298 | Length of key fields exceeds limit for webservice target |
| 299 | DDIC sync failed for object &1 at rfc destination &2 |
| 300 | &1 &2 &3 &4 |
| 301 | Field &1 already exists in structure &2 |
| 302 | No data found for the selection |
| 303 | Data refreshed |
| 304 | Transfer status successfully reset |
| 305 | Select at least one row |
| 306 | Specify a mass transfer ID |
| 307 | No tables found for mass transfer ID &1 |
| 308 | Cannot reset transfer status; record already has status 'Not Transferred' |
| 309 | &1 is not a valid archive object |
| 310 | Specify a DDIC type in tab Generic Parameters for each generic parameter |
| 311 | Cannot retrieve data for function module &1 (RFC connection &2). |
| 312 | Documentation object &1 already exists: creation was aborted |
| 313 | Value help is not available; remote system release is lower than 4.6C |
| 314 | Value help is not available because domain &1 is unknown; contact SAP |
| 315 | Value help not available as domain &1 has no fixed values; contact SAP |
| 316 | Value help is not available; contact SAP |
| 317 | No structure found for parameter &1 |
| 318 | Subproject &1 is not assigned to project &2 |
| 319 | &1: Cannot improve performance of initial load; see long text |
| 320 | &1 is not a valid field name |
| 321 | &1: Parallelization not supported for pool tables and table views |
| 322 | Migration object can no longer be used; rule &3 has been changed |
| 323 | Migration object cannot be updated; an error occurred |
| 324 | Name is empty or length of namespace is not between 1 and 8 characters |
| 325 | Only use '/' as a namespace delimiter |
| 326 | The object name only consists of the namespace |
| 327 | Object ID can only contain letters, numbers, or underscore characters |
| 328 | Technical error |
| 329 | Cannot save message to application log; see long text |
| 330 | Cannot assign rule to object;object already has a rule with the same name |
| 331 | Cannot assign rule to object; this rule is used by another rule |
| 332 | Cannot assign rule to object; rule is assigned to object on same level |
| 333 | Name too long; maximum length is &1 |
| 334 | Name &1 is protected; choose another name |
| 335 | Name must start with Z, Y, or another customer namespace |
| 336 | Error while checking for authorization |
| 337 | Class &1 does not implement interface &2 |
| 338 | Cannot check DDIC proxy table &1 due to errors |
| 339 | Structure inconsistency of DDIC proxy table &1 |
| 340 | You are not authorized to create DDIC proxy table &1 |
| 341 | Error while creating proxy table &1 |
| 342 | Error while activating proxy table &1 |
| 343 | Error while creating nametab entry for proxy table &1 |
| 344 | Error while dropping proxy table &1 |
| 345 | Database connection &1 does not exist |
| 346 | Database &1 is not supported |
| 347 | Cannot find migration object with GUID &1; enter a correct GUID |
| 348 | Error while creating staging table &1 |
| 349 | Error while creating sender database connection |
| 350 | Registration for staging table &1 is inconsistent |
| 351 | Error while generating unique identifier for staging table |
| 352 | Error while synchronizing staging table &1 with migration object |
| 353 | Error while dropping staging table &1 |
| 354 | Error while selecting data from table &1 |
| 355 | Cannot drop staging table &1; the table is not empty |
| 356 | Error while determining the selection field |
| 357 | Error while altering staging table &1 |
| 358 | Number range are fully occupied |
| 359 | Cannot lock table &1 |
| 360 | Error while deleting data from table &1 |
| 361 | Failed to lock staging tables to prevent adding new data |
| 362 | Failed to unlock the staging tables |
| 363 | No more objects to be processed |
| 364 | Inconsistent record in DMC_MT_TABLES for mass transfer &1 object &2 |
| 365 | Error during synchronization; inconsistency still exists |
| 366 | Staging Table &1 exists in database |
| 367 | Required field &1 of structure &2 have been changed |
| 368 | Project &1 deleted |
| 369 | Project &1 is deleting |
| 370 | Structure &1 is a lookup table; it cannot be mapped to a target structure |
| 371 | Failed to alter constraint of staging table &1 |
| 372 | Migration Object &1: rfc destination of &2 not defined |
| 373 | Domain &1 has no fixed values |
| 374 | Field &1 of table &2 is invalid |
| 375 | Internal field name not find for the target field name &1 |
| 376 | Please provide the source field name or target field name |
| 377 | Invlid parameter &1 is &2 |
| 378 | Extensibility Relationship is not maintained |
| 379 | Table &1 not found in mass transfer &2 |
| 380 | Please don't input both of the application server and server group. |
| 381 | Enter either the application server or server group, not both |
| 382 | Invalid application server; for valid application servers, use input help |
| 383 | Invalid user name; for valid users name, use input help (F4 help) |
| 384 | Replication failed for table &1;listener framework denied metadata update |
| 385 | Failed to delete the existing DB connection &1 |
| 386 | Cannot convert a template MO to a Staging MO (IDENT: &1,GUID: &2) |
| 387 | Cannot unconvert a Staging MO to a File MO (IDENT: &1,GUID: &2) |
| 388 | Shadow DDIC objects could not be created for table &1 / destination &2 |
| 389 | Select an active view before you start a synchronization |
| 390 | Cannot copy migration object; rule &1 has been changed |
| 391 | &1 is a lookup table; path for structure &2 must be #User Defined Path# |
| 392 | You need to save the object before you can edit the documentation |
| 393 | No loaded flags have been reset |
| 394 | Migration Object &1 locked by another process; no changes allowed |
| 395 | Message id &1 could not be found |
| 396 | Delete runtime objects in sender system |
| 397 | Delete runtime objects in receiver system |
| 398 | Extensibility Relationship for Structure '&1' is not maintained |
| 399 | ABAP class &1 does not exist |
| 400 | Reading type &1 set to &2 for table &3 |
| 401 | Cannot create logging table for &1; see long text |
| 402 | Cannot create logging table for &1; see long text |
| 403 | ABAP class &1 does not implement interface &2 |
| 404 | Error when setting payload; data of node &1 are not compatible |
| 405 | Error when setting payload; node &1 not found |
| 406 | Source system version does not support archiving settings, see long text |
| 407 | Cannot determine number of active data transfer jobs; contact SAP |
| 408 | Timestamp for DDIC activation of table &1 has changed |
| 409 | DDIC comparison has found a structural difference for table &1 |
| 410 | Job finished due to midnight restart |
| 411 | Job finished due to specification in activity record |
| 412 | Initial load of table &1 finished |
| 413 | Job finished because there are no more tables to process |
| 414 | Start of replication for table &1 |
| 415 | Start creation of logging table for table &1 |
| 416 | Start creation of triggers for table &1 |
| 417 | Start job to define migration object for table &1 |
| 418 | Start creation of migration object for table &1 |
| 419 | Start job to calculate ACP for table &1 |
| 420 | Migration object is defined for table &1 |
| 421 | Access plan is calculated for table &1 |
| 422 | This project option is currently not supported; see long text |
| 423 | Staging object may not be cleaned up completely; MO:&1; Project &2 |
| 424 | Project &1 couldn't be deleted completely |
| 425 | Project &1 does not exist |
| 426 | Failed to lock project &1 |
| 427 | Migration object &1 not found |
| 428 | Failed to change client for project &1 |
| 429 | Client can be changed only for Fiori project |
| 430 | Failed to reset staging tables for project &1 |
| 431 | Failed to lock subproject &1 |
| 432 | Failed to lock migration object &1 |
| 433 | Project &1 is already locked; contact SAP for support |
| 434 | Specify a RFC destination |
| 435 | Field with fieldname '&1' does not exist |
| 436 | Group text '&1' does not exist |
| 437 | Entry with key &1 already exists in repository |
| 438 | Entry with key &1 does not exist |
| 439 | Element not found |
| 440 | Unable to load calc view manager for mig.object &1 and view ident &2 |
| 441 | Visibility for structure tree &1 cannot be set |
| 442 | Error during view calculation |
| 443 | Cannot change visibility of '&1'; structure '&2' already contains data |
| 444 | No ABAP class for view calculation for mig.object &1 and view ident &2 |
| 445 | Migration object &1 existed before, was deleted and recreated |
| 446 | Cannot find an activity with GUID &1 |
| 447 | Cannot find an activity for the job ID &1 |
| 448 | Cannot find IUUC data for migration object &1 |
| 450 | Provide a valid table name |
| 451 | Provide a valid transfer type (1, 2, or 3); see long text |
| 452 | Provide a logical operator from domain DTL_LOGICAL_OPERATOR |
| 453 | Provide a valid gating operator (space, 'AND', or 'OR') |
| 454 | A value for the logical operator 'LIKE' must contain a wild card '%' |
| 455 | Structure tree for data structure guid &1 could not be found |
| 456 | Migration Object &1 and &2 are incompatible; copy visibility not possible |
| 457 | Migration Object &1 has no calculated view; |
| 458 | Migration Object &1 has already a calculated view; creation not possible |
| 459 | Migration Object &1 has no calculated view; deletion not possible |
| 460 | Cannot process event for object &1 |
| 461 | Setting a field to 'not visible' is not allowed on recalculation |
| 462 | S4H system info is not available |
| 463 | View &1 is not assigned to migration Object &2; copy not possible |
| 464 | Setting visibility '&1' for '&2' (&3) is not allowed on recalculation |
| 465 | Visibility value '&1' for field '&2' of structure '&3' is not valid |
| 466 | System parameters are not available |
| 467 | Setting visibility '&1' for structure '&2' not allowed on recalculation |
| 468 | Visibility value '&1' for structure '&2' is not valid |
| 469 | Implementation missing for method &1 of ABAP class &2 |
| 470 | &1 is mapped to &2; path for structure &2 must be #User Defined Path# |
| 471 | Method &1 of ABAP class &2 is not active |
| 472 | Visibility of structure &1 changed from '&2' to '&3' |
| 473 | Visibility of field &1 of structure &2 changed from '&3' to '&4' |
| 474 | Error during view calculation; calculation result is not consistent |
| 475 | Visibility was initialized with default values. |
| 476 | Package not translated into all languages for application component '&1' |
| 477 | Table &1 does not exist on database (RFC destination &2) |
| 478 | Field &3 in Table &1 has unknown datatype &4 (RFC dest &2) |
| 479 | Runtime objects for &1 are invalid. Automatic re-generation scheduled. |
| 480 | Data element must not be empty |
| 481 | Fieldname must not be empty |
| 482 | Position must not be empty |
| 483 | Data element &1 is not valid |
| 484 | Fieldname &1 is not unique |
| 485 | Field position &1 not unique |
| 486 | Field positions have gaps |
| 487 | Value origin of field &1 is not valid |
| 488 | Entity name must not be empty |
| 489 | Entity field must not be empty |
| 490 | Entity name &1 is invalid |
| 491 | Entity field &1 is invalid |
| 492 | Parameter name must not be empty |
| 493 | Parameter name &1 is invalid |
| 494 | Parameter field must not be empty |
| 495 | Parameter field &1 must be empty |
| 496 | Parameter field &1 is invalid |
| 497 | Parameter &1 cannot be used |
| 498 | Instance ID &1 is invalid |
| 499 | Execution ID &1 is invalid |
| 500 | Reset Record &1 with Senderkey &2 |
| 501 | Setting key field &1 to 'not visible' is not allowed on recalculation |
| 502 | Structure tree &1 of migration object &2 could not be found |
| 503 | Migration object &1 could not be found |
| 504 | Invalid settings for default variant of control parameter &1 |
| 505 | Project with ident &1 could not be found |
| 506 | Subproject with ident &1 could not be found |
| 507 | Method &1 contains mandatory parameters; all parameters must be optional |
| 508 | Error in variant filter for &1 |
| 509 | Error when trying to set default variant for &1 |
| 510 | Cannot delete instance; instance already successfully migrated |
| 511 | Error occurred while deleting the instance |
| 512 | Error when trying to retrieve system type |
| 513 | A newer version of this migration object is available (&1) |
| 514 | This migration object has been retired. Use &1 instead |
| 515 | This migration object is no longer supported by SAP |
| 516 | This migration object has been retired by SAP |
| 517 | Mig Obj life cycle state &1 is invalid; succ &2 is no file temp object |
| 518 | Message of class &1 and number &2 does not exist |
| 519 | Data object is locked by &1 |
| 520 | Specify a message class and message number |
| 521 | Error occurs while creating projection view for staging table &1 |
| 522 | Infos for the content cannot be retrieved |
| 523 | Error while copying staging table &1 data |
| 524 | &1 &2 must start with the prefix &3 |
| 525 | &1 &2 must not start with the prefix &3 |
| 526 | Values cannot contain periods (character �.�); periods removed from &1 |
| 527 | Job finished due to maintenance mode |
| 528 | Transport request was not written |
| 529 | Technical ID of customer extension has an incorrect format |
| 530 | Technical ID &1 already added as customer extension |