EAMS_BO - Business Object Layer
The following messages are stored in message class EAMS_BO: Business Object Layer.
It is part of development package EAMS_BO_MISC in software component PM. This development package consists of objects that can be grouped under "".
It is part of development package EAMS_BO_MISC in software component PM. This development package consists of objects that can be grouped under "".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Specify a piece of equipment |
| 002 | Piece of equipment &1 does not exist |
| 003 | Piece of equipment &1 is not valid |
| 004 | Technical object &1 is locked by user &2 |
| 005 | Internal error; object number for technical object &1 &2 &3 &4 is missing |
| 006 | Enter a number for the suboperation |
| 007 | Enter a plant |
| 008 | Fleet object types are not supported |
| 009 | Data origin could not be retrieved |
| 010 | Functional location &1 does not exist |
| 011 | Functional location &1 is not valid |
| 012 | Specify a functional location |
| 013 | Technical object saved |
| 014 | Longitude &1 is not valid |
| 015 | Latitude &1 is not valid |
| 016 | Technical object &1 is invalid |
| 017 | Customer master warranty & does not exist |
| 018 | Vendor master warranty & does not exist |
| 019 | Technical object type &1 is invalid |
| 020 | Specify a material |
| 021 | Material &1 does not exist |
| 022 | Material &1 is not valid |
| 023 | Could not find status desc. for cross-plant material for language &1 |
| 024 | Specify the technical object category |
| 025 | Material &1 with serial number requirement cannot be posted |
| 026 | Item does not exist to notification &1 |
| 027 | Cause does not exist to notification &1, item &2 |
| 028 | Dependent fields were changed automatically; check entries |
| 029 | Notification &1 saved |
| 030 | Notification &1 does not exist |
| 031 | Notification &1 is not valid |
| 032 | Person responsible for notification &1 was changed to &2 &3 &4 |
| 033 | Person responsible for notification &1 was cleared |
| 034 | Identifier is missing for object type "Notification" |
| 035 | Unit missing for breakdown duration |
| 036 | Unit &1 is invalid for duration |
| 037 | Identifier is missing for object type "Order" |
| 038 | Notification header not updated |
| 039 | Downtime specified; breakdown indicator was selected |
| 040 | Error while reading operation data of confirmation |
| 041 | Specify a task list |
| 042 | Task list &1 &2 &3 does not exist |
| 043 | Task list &1 &2 &3 is not valid |
| 044 | Task &1 does not exist |
| 045 | Error while reading order data of confirmation |
| 046 | Enter the cause code |
| 047 | Error in "Confirmation of Material Used" for material '&1' |
| 048 | Operation &1 does not exist |
| 049 | Suboperation &1 &2 does not exist |
| 050 | Task &1 completed |
| 051 | Task &1 is already completed |
| 052 | Job changed |
| 053 | Person responsible for order &1 cleared |
| 054 | No operations available for work center &1/&2 person &3 in order &4 |
| 055 | Job type &1 does not exist |
| 056 | Status retrieval for multiple objects must be done for same status |
| 057 | Measuring point/counter &1 was already entered |
| 058 | Maintenance item &1 is already assigned to maintenance plan &2 |
| 059 | Maintenance item number &1 does not exist or is not within external range |
| 060 | Document info record &1 is not valid |
| 061 | Specify a document info record |
| 062 | Enter an operation |
| 063 | Relationship to operation &1 of order &2 already exists |
| 064 | Maintenance item &1 does not exist |
| 065 | No measuring points available for reference object &1 |
| 066 | Maintenance strategy &1 of item &2 differs from strategy of maint. plan |
| 067 | Maint. plan category &1 of item &2 differs from category of maint. plan |
| 068 | You cannot delete the notifcation assignment; save the order first |
| 069 | You cannot delete the order assignment; save the notification first |
| 070 | Cannot determine persons for work center &1 of plant &2 |
| 071 | Specify a work center |
| 072 | Only numeric values are permitted for sel. param. "Person Responsible ID" |
| 073 | "From" value &1 is larger than "To" value &2 |
| 074 | No work center found for the specified selection criterion |
| 075 | SAP notes 393393 and 551133 must be implemented before using job query |
| 076 | Error while saving documents |
| 077 | Cannot delete item; a related task exists |
| 078 | You entered the task list key incorrectly or the task list does not exist |
| 079 | Task list &1 &2 &3 is locked |
| 080 | Specify a measuring point |
| 081 | Measuring point &1 is not valid |
| 082 | Specify a measuring point or counter |
| 083 | Task list &1 &2 &3 marked for deletion |
| 084 | Please select maximum &1 orders |
| 085 | Person responsible ID not valid |
| 086 | Maintain value categories in Customizing: "Settings for Display of Costs" |
| 087 | Material availability check for order &1 has failed |
| 088 | Material availability check for order &1 is successful with some warnings |
| 089 | Material availability check for order &1 is successful |
| 090 | Specify a measurement document |
| 091 | Measurement document &1 is not valid |
| 092 | Enter a basis for measurement reading |
| 093 | Enter a measurement reading before saving |
| 094 | Material availability check for order &1: Status is not up-to-date |
| 100 | Order &1: Data not found |
| 101 | Notification &1: Data not found |
| 102 | You cannot remove task list &1/&2/&3 from order &4 |
| 103 | You cannot set status &1 for order &2 |
| 104 | Creation of service orders is not supported |
| 110 | Specify an ArchiveLink document ID |
| 111 | ArchiveLink document ID &1/&2 is not valid |
| 113 | Editing is not possible; data locked by user &1 |
| 114 | A system error occurred while locking |
| 120 | Notification &1 task &2 not completed |
| 121 | Notification &1 not completed |
| 122 | Notification &1 task &2 completed |
| 123 | Deletion not possible; causes are assigned |
| 124 | To delete codes and code groups, use the "Remove" pushbutton |
| 125 | Order &1 operation &2 confirmed |
| 127 | Confirmation of order &1 operation &2 is not possible |
| 128 | You cannot discard changed data for order &1 operation &2 |
| 129 | Release of order &1 not possible; order saved without release |
| 130 | Enter either the reading or the counter reading difference |
| 131 | Enter a measuring point |
| 132 | Enter a measurement date for measuring point &1 |
| 133 | Enter a measurement time for measuring point &1 |
| 134 | 2 measurement readings exist for measuring point &1 |
| 135 | Measuring point &1 does not exist |
| 136 | An overflow was triggered by measuring point &1 |
| 137 | Error while trying to access measurement reading &1 |
| 138 | Measurement reading &1 has already been saved and cannot be deleted |
| 139 | Measuring point &1 is locked by user &2 |
| 140 | Error in &1 |
| 141 | Value cannot be interpreted as floating pt number or longer than 22 chars |
| 142 | Counter reading must be less than counter overflow; use difference |
| 143 | A transfer has been defined for measuring point &1 |
| 144 | Enter valation code, counter reading, or counter diff. for meas. point &1 |
| 145 | Enter measurement reading for point &1 |
| 146 | Enter counter reading or difference for counter &1 |
| 147 | Enter valuation code or counter reading for meas. point &1 |
| 148 | Measurement document &1 saved for measuring point &2 &3 |
| 149 | Enter a real estate type |
| 150 | Unit &1 is invalid |
| 151 | Error while converting actual work |
| 152 | Error while converting remaining work |
| 153 | Enter a characteristic and/or a code group |
| 154 | Enter a code group |
| 155 | Enter a characteristic |
| 156 | Enter a technical object |
| 157 | Enter a settlement unit |
| 158 | Enter a building |
| 159 | Enter a rental object |
| 160 | Order &1 is locked |
| 161 | Notification &1 is locked |
| 162 | Enter a reference object type |
| 163 | Measuring point &1 is inactive |
| 164 | &1 measurement document(s) created by measurement reading transfer |
| 165 | &1 measurement document(s) could not be created; see transaction IK15 |
| 166 | &1 is a reference measuring point not a measuring point |
| 167 | Backward scheduling; system date set as end date |
| 168 | Related Order &1 is locked by user &2 |
| 170 | Message from search service: &1 |
| 171 | Enter an item description |
| 172 | Enter a planning plant |
| 173 | Enter an order type |
| 174 | Enter a main work center |
| 175 | Enter a plant for the main work center |
| 176 | Enter a notification type |
| 177 | You are not authorized to create an order |
| 178 | Compatible units (order type &1) are not supported |
| 180 | No job card is available for this job |
| 181 | Enter a valid service contract |
| 182 | Enter a valid service contract item |
| 183 | Enter a valid service template |
| 184 | Enter either a technical object or a product |
| 185 | Technical object and Product cannot be filled at the same time |
| 186 | Product &1 is invalid |
| 187 | Product &1 is flagged for deletion |
| 188 | Material &1 is flagged for deletion |
| 190 | New ID does not exist |
| 200 | Long text does not exist |
| 201 | Search connector for category &1 is not active |
| 202 | Request &1 of the object type ID &2 returned an error |
| 203 | Request &1 of the object type ID &2 is not searchable |
| 210 | PRT ID is missing |
| 211 | PRT &1 &2 does not exist |
| 212 | PRT data for equipment &1 not found |
| 213 | Plant cannot be determined for material PRT &1 |
| 214 | Material &1 is not defined as a PRT |
| 215 | Document &1 already assigned as PRT to operation &2 |
| 216 | Material &1 in plant &2 already assigned as PRT to operation &3 |
| 217 | Equipment &1 already assigned as PRT to operation &2 |
| 218 | Miscellaneous PRT &1 already assigned as PRT to operation &2 |
| 219 | Material &1 already assigned to operation &2 |
| 220 | Specify an object link |
| 221 | Object link &1 does not exist |
| 222 | Specify an object network |
| 223 | Object network &1 does not exist |
| 224 | Measuring Point &1 already assigned as PRT to operation &2 |
| 225 | Techn. obj. changed for operation &1; check if PRTs are still valid |
| 226 | PRT &1 is from category "Measuring Point" and was not copied |
| 230 | Specify a maintenance item |
| 231 | Specify a maintenance plan |
| 232 | Cannot read maintenance strategy |
| 233 | No data found for maintenance plan &1, call object &2, item &3 |
| 234 | Repeat factor within cycle set &1 adjusted for cycle &2, counter &3 |
| 235 | Start counter reading value has been deleted |
| 236 | Enter a description for the maintenance plan or maintenance item |
| 237 | Order type changed; dependent fields have been reset |
| 238 | End counter for scheduling value has been deleted |
| 239 | Maintenance item &1 is not available for Display Maintenance Item app |
| 240 | Specify a purchase requisition |
| 244 | Confirmation is not permitted; check Customizing of order type &1 |
| 250 | You are not authorized to display this measurement document |
| 251 | You are not authorized to create measurement documents for this object |
| 260 | Counter reading for point &1 must be lower than counter overflow: &2 &3 |
| 261 | Counter reading for point &3 higher than in subsequent doc. &2: &1 &4 |
| 262 | Counter reading for point &1 lower than in previous doc. &2: &3 &4 |
| 263 | Counter reading for point &1 higher than in previous doc. &2: &3 &4 |
| 264 | Meas. reading for point &1 outside the meas. range limits: &2 - &3 &4 |
| 265 | Cntr reading for point &1 falls above max. total cntr reading: &2 &3 |
| 266 | Cntr reading for point &1 falls below min. total cntr reading: &2 &3 |
| 270 | No task list exists for technical object &1 |
| 271 | No service packages can be assigned for operations with control key &1 |
| 272 | No limits can be assigned for operations with control key &1 |
| 274 | Suboperation &1 of operation &2 was not copied due to service relevance |
| 275 | Task list & created and saved |
| 276 | Task list of this type already created |
| 277 | Non-stock material of operation &1 was not copied |
| 278 | You must also select main operation &1 to copy suboperations |
| 279 | Select technical object type of &1 |
| 280 | Specify a service entry sheet |
| 291 | Enter the data of the previously entered PRT first |
| 292 | The function for this PRT category is not available |
| 293 | No PRT control key defined |
| 300 | BAPI interoperability error: &1 &2 &3 &4 |
| 301 | A non-recoverable error occurred while creating a new notification |
| 302 | Priority of notification was not copied to order |
| 310 | WCM template &1 already assigned to order |
| 311 | WCM template &1 already assigned to task list |
| 312 | Manual creation of operations with control key WCM is not permitted |
| 320 | WCM requirement &1 already assigned |
| 330 | Permit &1 cannot be shown before the assignment is saved |
| 340 | Internal service operations are not supported (control key &) |
| 350 | Structure list has been cut off after &1 sublevels |
| 355 | Could not set deletion flag for notification &1 |
| 356 | Could not reset deletion flag for notification &1 |
| 360 | Cannot delete item &1; a related task or activity exists |
| 370 | Enter main work center in the user default values |
| 371 | Data of task list &1 has not been copied to the new maintenance order |
| 372 | Data of task list &1 has not been copied to the new maintenance order |
| 373 | Service packages have not been copied to the new maintenance order |
| 380 | Hidden relationship type '&1' has been made visible |
| 390 | Address of assigned components and suboperations has been updated |
| 391 | Address could not be updated |
| 400 | Operation &1: Activity type &2 &3 &4 does not exist, therefore not copied |
| 401 | Cost element changed from &1 to &2 by material group; check entries! |
| 405 | &1 &2 changed |
| 407 | &1 &2 not changed; choose the icon in column "Changed" for more info |
| 410 | &1 entries found |
| 420 | Notification is processed with SAP Fiori App "Respond to Malfunction" |
| 421 | Order is processed with SAP Fiori App "Respond to Malfunction" |
| 500 | You do not have sufficient authorization |
| 501 | Notification &1 accepted. |
| 502 | Notification &1 saved. |
| 503 | Material and Assembly cannot be filled at the same time |
| 504 | Serial number cannot be filled without Material |
| 505 | Technical Object and Product cannot be filled at the same time |
| 506 | PRT data for material &1 and plant &2 not found |
| 507 | Notification &1 was rejected. |
| 508 | Status action &1 not supported. |
| 509 | The reason code &1 has already been deactivated. |
| 550 | Enter Assembly |
| 551 | Enter Material |
| 552 | Enter Technical Object |