EEDMSET - Nachrichten zur Bilanzierung
The following messages are stored in message class EEDMSET: Nachrichten zur Bilanzierung.
It is part of development package EE_EDM_SET in software component IS-U-EDM. This development package consists of objects that can be grouped under "EDM Settlement".
It is part of development package EE_EDM_SET in software component IS-U-EDM. This development package consists of objects that can be grouped under "EDM Settlement".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Cannot find data for settlement unit &1 |
| 001 | Define the validity period for settlement unit &1 |
| 002 | Enter a valid period for settlement unit &1 |
| 003 | No usage factors selected for the period from &1 to &2 |
| 004 | Settlement units &1 and &2 are not unique |
| 005 | The time slices for settlement unit &1 are inconsistent |
| 006 | Internal error: parameter error in class &1 method &2 |
| 007 | Definition of settlement unit &1 is not consistent |
| 008 | More than one settlement unit found for point of delivery &1 |
| 009 | No validity period defined for point of delivery service &1 |
| 010 | Data already selected for settlement run &1 |
| 011 | No load profile selected for period from &1 to &2 |
| 012 | &3 consumption factors selected for the period &1 to &2 |
| 013 | &3 load profiles selected for the period &1 to &2 |
| 014 | Profile &1 selected more than once for settlement |
| 015 | Data already selected for settlement run &1 |
| 016 | Definition of settlement units is incorrect |
| 017 | Settle unit &1 from &3 |
| 018 | Unit &1 cannot be settled by &2 |
| 019 | Unit &1 cannot be settled in the period &2 to &3 |
| 020 | Service provider &1 has an incorrect service category |
| 021 | Settlement unit &1 not yet generated |
| 022 | No settlement units exist |
| 023 | Started generating settlement units |
| 024 | Completed generating settlement units |
| 025 | Generation of settlement units completed with errors |
| 026 | You do not have to generate settlement units |
| 027 | Number of points of delivery processed: &1 |
| 028 | Number of consistent points of delivery: &1 |
| 029 | Number of incorrect points of delivery: &1 |
| 030 | Number of changed points of delivery: &1 |
| 031 | Generate of settlement units is required |
| 032 | Generating settlement units can entail very long runtimes |
| 033 | PoD &1 is allocated to several grids in the settlement period |
| 034 | Choose a date in the validity period of the settlement unit |
| 035 | Changes to settlement unit &1 were adopted |
| 036 | Time slice are being modified |
| 037 | Enter a settlement unit |
| 038 | Enter a division category |
| 039 | Settlement unit &1 already exists |
| 040 | You cannot delete settlement unit &1 |
| 041 | Internal error: settlement unit &1 has not been opened for deletion |
| 042 | Settlement unit &1 deleted |
| 043 | Enter a selection variant |
| 044 | No data found that meets selection variant &1 |
| 045 | Allocate settlement process &1 roles for installation allocation |
| 046 | Allocate settlement process &1 roles for register allocation |
| 047 | Changes to selection variant &1 were adopted |
| 048 | Selection variant &1 already exists |
| 049 | Define the selection criteria for selection variant &1 |
| 050 | Selection variant &1 does not exist |
| 051 | You cannot make any changed before &1 |
| 052 | Unit &1 has already been settled |
| 053 | Settlement unit &1 unlocked |
| 054 | Save the changes before generating |
| 055 | Settlement unit &1 cannot be generated |
| 056 | Settlement unit &1 not generated |
| 057 | Enter a Service Provider for Settlement Coordination |
| 058 | Enter a Service Provider for Supply |
| 059 | Enter a point of delivery for settlement unit &1 |
| 060 | Choose a to-date that is later than the from-date |
| 061 | Select a line |
| 062 | No grid allocated to point of delivery &1 from &2 to &3 |
| 063 | Enter a point of delivery that is valid from &1 to &2 |
| 064 | Settlement unit &1 has not been generated yet |
| 065 | Enter all parameters |
| 066 | Reference consumption generated successfully for settlement unit &1 |
| 067 | Generation of reference consumption terminated for settlement unit &1 |
| 068 | Enter a role for profile allocation |
| 069 | No points of delivery selected |
| 070 | Profiles for point of delivery &1 exported |
| 071 | Enter the settlement unit category |
| 072 | Settlement unit category &1 not found |
| 073 | You cannot enter a service provider for settlement coordination |
| 074 | Enter a service provider for distribution |
| 075 | You cannot enter a service provider for 'distribution' service category |
| 076 | You cannot enter a service provider for the supply |
| 077 | Choose a settlement view |
| 078 | Settlement unit &2 does not have settlement view &3 |
| 079 | Settlement units &1 and &2 have different settlement views |
| 080 | Allocate settlement unit categories to settlement procedure &1 |
| 081 | Allocate service types to settlement procedure &1 |
| 082 | Define &1 selections for the settlement procedure |
| 083 | Use function 'Undo Redefine DATEX Definition' |
| 084 | Processing was canceled after &1 errors |
| 085 | Settlement unit &1 does not have permissible category &2 |
| 086 | Saved changes to settlement unit for point of delivery |
| 087 | Select a manual allocation |
| 088 | Manual allocation deleted |
| 089 | Choose a settlement unit for settlement view &2 |
| 090 | Settlement unit &1 is not valid for the specified period |
| 091 | The settlement units have been generated despite errors |
| 092 | This period does not correspond to the validity period of the PoD ID |
| 093 | Cannot find a settlement unit for external ID &1 |
| 094 | Several settlement units were found for external ID &1 |
| 095 | Error allocating settlement unit &1 |
| 096 | Service provider &1 does not belong to service category &2 |
| 097 | Cannot uniquely determine settlement unit for point of delivery &1 |
| 098 | Cannot determine settlement unit for point of delivery &1 |
| 099 | Settlement unit &2 is also selected for settlement |
| 100 | Alert status &1 not permitted |
| 101 | Settlement document status &1 not permitted |
| 102 | Mode &1 of settlement run not permitted |
| 103 | Settlement document &1 does not exist |
| 104 | You have not entered a settlement document number |
| 105 | Settlement run &1 for settlement document &2 does not exist |
| 106 | Settlement run status &1 not permitted |
| 107 | No alerts transferred |
| 108 | Mode &1 for settlement log is not permitted |
| 109 | Level &1 is not permitted for the creation of external keys |
| 110 | Settlment document &1 does not correspond to the document expected (&2) |
| 111 | Settlment run &1 does not correspond to the run expected (&2) |
| 112 | Settlment step &1 does not correspond to the step expected (&2) |
| 113 | There is a message without a number |
| 114 | There is a message without a message category |
| 115 | There is a message without a message class |
| 116 | Method &1 was not processed |
| 117 | There are no messages to be saved |
| 118 | Do not enter data in field &1 |
| 119 | Problem class &1 is not permitted |
| 120 | Error status &1 is not permitted |
| 121 | Parmeter &1 must have value &2 in the current version |
| 122 | Method &1 of class &2 is not permitted in the current mode |
| 123 | There are no errors to be saved |
| 124 | One of the following fields is empty: message category, class, or no. |
| 125 | Message class &1 is not permitted |
| 126 | Error &1 does not exist |
| 127 | No active errors found for settlement run |
| 128 | No lines from previous settlement runs found |
| 129 | Status &1 of settlement run is not permitted |
| 130 | Settlement document &1 is not allocated to any settlement units |
| 131 | You cannot restart a settlement step |
| 132 | Run &2 of settlement document &1 stopped |
| 133 | No definition for action &1 |
| 134 | Check mode &1 not permitted for class &2 |
| 135 | Error generating the settlement document number |
| 136 | Select at lease one alert to be confirmed |
| 137 | Position the cursor on a valid line to go to the detailed display |
| 138 | Type of settlement run &1 is not permitted |
| 139 | You cannot change settlement run &1 |
| 140 | Settlement run &1 &2 cannot be started |
| 141 | Settlement procedure &1 cannot be executed as a report |
| 142 | Type of settlement run &1 is only permitted if an original run exists |
| 143 | An original run already exists |
| 144 | Time zone &1 does not exist |
| 145 | Mode &1 is not permitted for settlement |
| 146 | The settlement procedure does not exist |
| 147 | Enter a settlement procedure |
| 148 | Enter the start date of the settlement document |
| 149 | Enter the finish date of the settlement document |
| 150 | You cannot delete settlement run &1 |
| 151 | You cannot delete settlement run &1 |
| 152 | Enter the time zone of the settlement document |
| 153 | Specify the mode of the settlement document |
| 154 | Specify a variant for selecting settlement units |
| 155 | Enter a settlement run type |
| 156 | You cannot create any settlement runs |
| 157 | You cannot stop settlement run &1 |
| 158 | Save any changes before stopping the settlement run |
| 159 | You cannot start settlement run &1 as a workflow |
| 160 | Save the changes before starting the settlement run |
| 161 | Error occurred while starting workflow task &1 |
| 162 | You cannot start settlement run &1 as a workflow |
| 163 | Error occurred while opening settlement job &1 |
| 164 | Error occurred while starting settlement job &1 &2 |
| 165 | Error occurred while scheduling settlement job &1 |
| 166 | Position cursor on a valid field |
| 167 | Position the cursor on a valid row |
| 168 | Settlement run &1 does not have a log |
| 169 | No workitems can be displayed for settlement run &1 |
| 170 | Choose another settlement document |
| 171 | No errors in settlement document &1 |
| 172 | Select at least one active error |
| 173 | Settlement document &1 does not have a settlement run |
| 174 | You cannot change the header data |
| 175 | Settlement unit selection has changed |
| 176 | No settlement units selected |
| 177 | Settlement procedure &1 is invalid |
| 178 | You cannot create a follow-up document |
| 179 | An error occurred while creating follow-up document |
| 180 | Enter a settlement document |
| 181 | You cannot set settlement document &1 to "completed" |
| 182 | You cannot send any profiles |
| 183 | No profiles transferred for sending |
| 184 | An error occurred while sending the profiles |
| 185 | To display the sending information, select one profile only |
| 186 | No settlement procedures found |
| 187 | You cannot enter a selection document. |
| 188 | You cannot change settlement document &1 |
| 189 | Selection variant &1 cannot find any settlement units |
| 190 | No dependent documents exist for settlement document &1 |
| 191 | Settlement document &1 was created |
| 192 | Settlement document &1 was changed |
| 193 | You cannot start settlement run &1 |
| 194 | Select at least one line |
| 195 | Select a maximum of &1 profiles |
| 196 | You are not permitted to refresh the settlement run data |
| 197 | Report &1 was started at &2 on &3 |
| 198 | Report &1 ended on &2 at &3 |
| 199 | Settlement document &1 run &2 has been started as a workflow |
| 200 | Settlement document &1 run &2 has been started as a report |
| 201 | Settlement document could not be created |
| 202 | Run &2 for settlement document &1 could not be started |
| 203 | Settlement view must be the same for settlement proc. and selection var. |
| 204 | The system cannot generate settlement units for point of delivery &1 |
| 205 | Time zone and/or day offset of profiles do not correspond |
| 206 | You do not have authorization for transaction &1 |
| 207 | You are not authorized to delete settlement units |
| 208 | Settlement document &1 is archived |
| 209 | The data drom the archive does not match the call data |
| 210 | The settlement period of 0 seconds is not permitted |
| 211 | Settlement period &1 - &2 is incorrect |
| 212 | Cannot select settlement units for variant &1 |
| 213 | No authorization to change settlement units |
| 214 | You do not have authorization for settlement procedure &1 |
| 215 | You cannot use procedure &2 to settle settlement unit &1 |
| 216 | Settlement views cannot be identical |
| 217 | You cannot change the from-date for settlement unit &1 |
| 218 | You cannot change the to-date for settlement unit &1 |
| 219 | Settlement unit &1 is not permitted as a higher-level settlement unit |
| 220 | Historical data for settlement unit &1 are invalid |
| 221 | You cannot change the from-date for settlement unit &1 |
| 222 | You cannot change the to-date for settlement unit &1 |
| 223 | Generation ignores times that are different 00:00:00 and 23:59:59 |
| 224 | Selection variant &1 is used in settlement document &2 |
| 225 | No entry in table EEDMSETTLUNITH for settlement unit &1 |
| 399 | Enter a settlement unit |
| 400 | Method &1 was not implemented in settlement step &2 |
| 401 | Unknown error occurred in settlement step &1 |
| 402 | No Customizing data found for settlement step &1 in table &2 |
| 403 | Entry parameter &1 (type &2) with value &4 was transferred |
| 404 | Result parameter &1 (type &2) with value &4 was calculated |
| 405 | Settlement step &1 does not require an input parameter |
| 406 | Settlement step &1 does nor supply result parameters |
| 407 | Input parameter &1 (type &2) is missing |
| 408 | Processing status for &1: &3 |
| 409 | Status &1; entry parameter &2; result parameter &3; &4 |
| 410 | No data saved in test mode |
| 411 | Settlement step &1 does not require any parameters |
| 412 | Parameter definition of settlement step &1 is not correct |
| 413 | Instance of settlement step &1 could not be generated |
| 414 | Private data of settlement step saved |
| 415 | Processing of settlement step &1 canceled due to error &2 |
| 416 | Internal error: log does not exist |
| 417 | &1 started |
| 418 | &1 settlement-relevant point(s) of delivery could not be allocated |
| 419 | Output parameter &1 already exists |
| 420 | Result parameter &1 (type &2) not calculated |
| 421 | Error messages (&1) automatically confirmed |
| 422 | Processing of settlement step &1 completed with warnings |
| 423 | Processing of settlement step &1 completed |
| 424 | Results of settlement step were recalculated |
| 425 | Paramter &1 could not be saved |
| 426 | Parameter &1 could not be saved in table &3 |
| 427 | Profile &1 (version &2) updated |
| 428 | Parameterwert &1 saved in table &2 |
| 429 | Paramter &1 could not be saved |
| 430 | Settlement paramter &1 with value &4 selected |
| 431 | Settlement paramter &1 was not selected |
| 432 | Internal error: profiles &1 and &2 have incompatible errors |
| 433 | Internal error: Instance of settlement process &1 does not exist |
| 434 | No point of delivery defined for settlement procedure &1 |
| 435 | No point of delivery defined for utility grid &1 |
| 436 | No point of delivery defined for settlement unit &1 |
| 437 | Ambiguous profile allocation for settlement parameter &1 |
| 438 | Internal error: invalid objects transferred to method &1 |
| 439 | &3 % of the profiles processed are lacking valid values (&1 to &2) |
| 440 | You cannot convert the profile unit of measurement from &1 to &2 |
| 441 | Settlement run status could not be changed &1, &2, &3, &4 |
| 442 | Ambiguous profile allocation for settlement parameter &1 |
| 443 | Ambiguous profile allocation for settlement parameter &1 |
| 444 | Settlement parameter &1 cannot be determined |
| 445 | Settlement parameter &1 cannot be determined |
| 446 | Settlement parameter &1 cannot be determined |
| 447 | Parameter &1 is not a parameter of settlement procedure &2 |
| 448 | Definition of profile parameter &1 is incomplete |
| 449 | Internal error: parameter &1 missing for method call &2 |
| 450 | Internal error: 'GET_SETTLSTEPCLASS' was not called |
| 451 | Profile &1 contains invalid values |
| 452 | Internal error: result parameter &1 not defined |
| 453 | Template profile is not defined for result parameter &1 |
| 454 | Usage type &1 of settlement parameter &2 is invalid |
| 455 | Profile allocation role for result paramter has not been maintained |
| 456 | No results parameters allocated to service provider &1 |
| 457 | No profiles with role &1 allocated to point of delivery &2 |
| 458 | Profile &1 (version &2) sent to service provider &3 |
| 459 | Interim result &1 (type &2) calculated with value &4 |
| 460 | Profile &1 contains invalid values |
| 461 | No business partner defined for service provider &1 |
| 462 | Settlement period is not correct |
| 463 | Settlement period is not correct |
| 464 | Settlement period is not correct |
| 465 | No contract account exists for business partner &1 (service provider &2) |
| 466 | No contract exists for business partner &1 (service provider &2) |
| 467 | No installations for business partner &1 (service provider &2) |
| 468 | No point of delivery defined for service provider &1 |
| 469 | Settlement step could not be re-executed |
| 470 | Several different values read for parameter &1 |
| 471 | Internal error: transferred parameter &1 is inconsistent |
| 472 | Settlement parameter &1 cannot be determined |
| 473 | Settlement parameter &1 cannot be determined |
| 474 | You can enter one settlement unit only |
| 475 | Parameter &1 is not an entry paramter of settlement procedure &2 |
| 476 | No profile found for optional interim result &1 |
| 477 | Input parameter &1 (type &2) is missing |
| 478 | No data exists for settlement unit &1 |
| 479 | More than one higher-level settlement unit exists |
| 480 | Internal error: parameter &1 is not a result parameter |
| 481 | Interim result &1 for settlement unit &2 is missing |
| 482 | Load shape included for subsettlement unit &2 |
| 483 | &1 customer groups included |
| 484 | &1 grids included |
| 485 | No data exists for grid &1 |
| 486 | Internal error: Division by zero for profile &1 on &2 &3 |
| 487 | Customer group &1 has zero annual consumption |
| 488 | Settlement run cannot be performed |
| 489 | Parameter definition of settlement step &1 is not correct |
| 490 | No settlement unit entered; parameter determination for &1 canceled |
| 491 | No grid entered; parameter determination for &1 canceled |
| 492 | Settlement document &1 used to select point of delivery data |
| 493 | Result profile &1 used more than once; Check the profile allocation |
| 494 | No inconsistencies were found |
| 495 | Consistency errors found; Check the error list |
| 496 | No point of delivery entered for settlement document &1. |
| 497 | Selection document &1 supplies no data |
| 498 | Selection document &1 supplies no data for settlement unit &2 |
| 499 | Selection document &1 not valid from &2 to &3 (&4) |
| 500 | Settlement document &1 not completed successfully |
| 501 | Selection document uses incompatible load shape selection |
| 502 | Selection document uses incompatible usage factor selection |
| 503 | Selection document uses other service type to select installation |
| 504 | Parameter with grid not permitted in role allocation context |
| 505 | Parameters per grid not permitted |
| 506 | Critical consistency errors in parameter allocation |
| 507 | Could not open settlement document; processing terminated |
| 508 | Settlement document is locked |
| 509 | No document found for this settlement unit |
| 510 | Profile &2 and profile template &3 for parameter &1 are incompatible |
| 511 | Select a selection document for which grids have been selected |
| 512 | No profile transferred with parameter number &1 |
| 513 | No factors transferred with parameter number &1 |
| 514 | Profile &1 is not a settlement parameter and cannot be sent |
| 515 | Settlement unit not found |
| 516 | Preliminary settlement procedure &1 was not completed successfully |
| 517 | Output not possible for point of delivery &1 |
| 518 | Output not possible for settlement document &1 |
| 519 | No points of delivery available for selection |
| 520 | Enter either an internal or external PoD ID |
| 521 | No entry found for service provider &1 |
| 522 | Cancellation by user |
| 523 | You cannot activate settlement documents with the status &1 |
| 524 | Document status adjusted to &1, &2, &3 |
| 525 | Time and/or date fields were changed according to the offset |
| 550 | Profile &1 has different points of delivery or EDIS indicators |
| 600 | Select at least one variant for the selection |
| 601 | Select at least one missing profile parameter to create |
| 602 | No profile parameters are missing; you can end the Wizard |
| 603 | Recommendation: Select all input parameters and results |
| 604 | Select at least one settlement parameter |
| 605 | Selected settlement procedure has no parameters |
| 606 | Definition of profile parameter &1 is incomplete |
| 607 | Processing can take a while; &1 profile parameters were created |
| 608 | Enter a selection document or grid(s) and customer group(s) |
| 609 | Cannot determine any grids or customer groups |
| 610 | Enter either a selection document or grids and customer groups |
| 611 | Template profile for creating settlement parameter & is missing |
| 612 | You have not specified a device cat. for creating the device info record |
| 613 | Cannot create device information record for &1 |
| 614 | Parameter &2 cannot be allocated to a register of point of delivery &1 |
| 615 | Customizing for input parameter or event missing in procedure &1 |
| 616 | In procedure &1 Customizing for parameters &2 and &3 is not unique |
| 617 | Settlement procedure &1 has no profile parameters |
| 618 | Profile parameter &1 has already been allocated |
| 619 | You have not specified a role for profile parameter &1 |
| 620 | Profile type of template profile &1 is not valid |
| 621 | Error occurred when accessing CDS view &1 |
| 622 | Load shapes with different interval lengths in settlement unit &1 |
| 623 | Different interval lengths in the load shapes and results profile |
| 624 | &3 load shapes selected for period &4 for settlement unit &1, grid &2 |
| 625 | &3 load shapes selected for period &1 to &2 for settlement unit &4 |
| 626 | Valid values (&4) are missing for &3 % of profiles for settlement unit &1 |
| 627 | Valid values (&4) missing for &3 % of profiles f. settl. unit &1, grid &2 |
| 628 | Error occurred defining settlement unit/grid combinations |