EHPRC_CPM_CHECK - Messages for Checks
The following messages are stored in message class EHPRC_CPM_CHECK: Messages for Checks.
It is part of development package EHPRC_CP_CORE in software component EHS-MGM-PRC. This development package consists of objects that can be grouped under "Compliance for products".
It is part of development package EHPRC_CP_CORE in software component EHS-MGM-PRC. This development package consists of objects that can be grouped under "Compliance for products".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Successfully checked |
| 001 | Failure while calling function &1 |
| 002 | Check function &1 is not defined |
| 003 | User exit &1 is not defined as a check function; use exit type "CHECK" |
| 004 | Check function &1 is not active in the system |
| 005 | Check function &1 not found |
| 006 | Specification type &1 is invalid |
| 007 | Specification &1 not found in product structure |
| 008 | Enter specification type in the specification header |
| 009 | Correct error for specification &1 in lower level of product structure |
| 010 | Enter pure substance &1 as mass fracation in composition &2 |
| 011 | Enter value for component &1 in composition of &2 |
| 012 | Specify a lower limit of component &1 that is lower than target value |
| 013 | Change value of component &1 so upper limit is higher than target value |
| 014 | Composition contains more than &1% of generic pure substances |
| 015 | Correct composition &1 that contains &2% to 100% of pure substance |
| 016 | Enter basic material/surface &1 as mass/mass fraction in composition &2 |
| 017 | Unit of measure of a contained basic material &1 must be a percent |
| 018 | Correct composition &1 containing &2% to 100% of basic material |
| 019 | Enter bulk &1 as mass or mass fraction in composition &2 |
| 020 | Pure substances can only contain a pure substance |
| 021 | Select only one alternative as the preferred alternative in group &1 |
| 022 | Basic material name (identifier NAM/BASMAT_NAM) does not exist |
| 023 | Select only one component as residue (RE) in composition &1 |
| 024 | Enter material number in the specification identifier NUM/MATNR |
| 025 | Select only one supplier specification as preferred for &1 |
| 026 | For product &1, enter a measured weight that is greater than zero |
| 027 | No unit of measure found for the specification weight |
| 028 | Enter part &1 as piece in composition &2 |
| 029 | Release basic material / surface &1 in the specification workbench |
| 030 | Use valid characters for tolerance value &1; only use numeric characters |
| 031 | Check difference between measured mass and calculated mass for &1 |
| 032 | No components and no IMDS NODE ID exist for the pure substance |
| 033 | No components and no IMDS ID exist for the substance |
| 034 | No VDA classification exists |
| 035 | No trade name (NAM/TRADE) exists |
| 036 | No basic symbol for the basic material exists |
| 037 | Error while reading the declaration information |
| 038 | Pure substance is prohibited in regulatory list &1 |
| 039 | Summarized quantities of the pure substance exceeds the threshold |
| 040 | Assess prohibited substances for component &1 of supplier &2 |
| 041 | Pure substance exceeds the threshold for &1 in product &2 |
| 042 | Component &1 with specification type &2 is not allowed in the composition |
| 043 | Compliance check cannot be performed for basic material or pure substance |
| 044 | Create subst. declaration or standard composition for basic material &1 |
| 045 | Cannot determine compliance status &1 for the product &2 |
| 046 | Tolerance value for lower or upper limit exceeded (&1) |
| 047 | Only substance with same specification types allowed in the composition |
| 048 | Enter an IMDS contact person in the "Contact Person" property |
| 049 | Enter an IMDS organization in the "Contact Person" property |
| 050 | Responsible person does not exist |
| 051 | Identifier "Material Name" (NAM/MAT) does not exist |
| 052 | Recyclability for production waste does not exist |
| 053 | Recyclability for post consumption does not exist |
| 054 | Organization ID &1 does not exist |
| 055 | Enter a value for "Chloro-fluorocarbons" in additional data |
| 056 | Enter a value for "Recycling Standard" in additional data |
| 057 | Identifier &1/&2 does not exist |
| 058 | Unit of measure of the netto weight is not equal to mass (&1) |
| 059 | Product &2 is not compliant; binding compliance date is exceeded |
| 060 | Identifier "Supplier" (NUM/SUPPLIER) is not allowed |
| 061 | Enter material, document, or manufacturer part number for &1 |
| 062 | Recycling information for the basic material &1 not found |
| 063 | Possible exemption for the homogeneous material is not defined |
| 064 | Exemption &1 is not defined for the homogeneous material |
| 065 | Material &1 contains no IMDS NODE |
| 066 | Basic material &1 contains no IMDS ID |
| 067 | Enter whole numbers as value for product &1 in composition &2 |
| 068 | Product or bulk &1 does not contain components |
| 069 | Object &2 is not compliant according to regulation &1; enter exemptions |
| 070 | Check for exemption in product structure; lower-level obj. not compliant |
| 071 | &2 contains at least one prohibited pure subst. (&3) of regulatory &1 |
| 072 | Pure substance in product &2 exceeds the threshold for &1 |
| 073 | No settings in Customzing for check &1, criteria &2 |
| 074 | Correct weight information for product/component &1 |
| 075 | Additional data "Colored" does not exist |
| 076 | Check failed; sum of pure substances exceed 10% (&1) |
| 077 | Check compliance for &1; binding compliance date is not reached |
| 078 | Product part &1 is compliant; binding compliance date is not reached |
| 079 | Product part &1 is compliant; binding compliance date is reached |
| 080 | Cannot execute checks; define checks in Customizing |
| 081 | Check &1 is not defined; define checks in Customizing |
| 082 | Declarable pure substance &1 in product structure with lower amount |
| 083 | Declarable pure substance &1 in product structure with higher amount |
| 084 | Check product structure; pure substance &1 declared as "Not Contained" |
| 085 | Correct data inconsistency; specification &1 compliant w/o exemption &2 |
| 086 | Add missing exemption for specification &1 |
| 087 | Calculated compliance status differs from existing status (spec. &1) |
| 088 | Calculated compliance statuses differ (specification &1) |
| 089 | Request/search a substance declaration for component &1 of supplier &2 |
| 090 | Nested basic materials/surfaces or bulks are used |
| 091 | Different material categories are on the same level |
| 092 | Change unit for specification &1 in composition of &2 to gram or percent |
| 093 | Specification has a weight under 0.000001 mg (1 ng). |
| 094 | Add an EFUP value for product &1 |
| 095 | Enter a manufacturer site for product &1 |
| 096 | Enter a classification for homogeneous material &1 |
| 097 | Enter a classification or a composition for specification &1 |
| 098 | Product is plant-dependent or uses more than one active instance |
| 099 | Maximum structure depth of &1 reached; specification &2 |
| 100 | Checks executed |
| 101 | Enter base unit of measure for specification &1 |
| 102 | Correct composition &1 containing &2% to 100% bulks/real substances |
| 103 | Value &1 is not allowed; enter a positive value |
| 104 | Invalid classification &2 for substance &3 according to &1; correct data |
| 105 | Correct your entry; exemptions are not allowed for regulatory list &1 |
| 106 | Assess incomplete substance declaration for component &1 of supplier &2 |
| 107 | Specification &1 was changed; you can upload the specification later |
| 108 | Specification &1 is part of the IMDS worklist (status &2); execute the WL |
| 109 | &2 &1: verify invalid exemption &3 for substance &4 in declaration |
| 110 | Maintain the REACH relevance for material &2 (substance &1) |
| 111 | Use information for REACH requested from customer &1 |
| 112 | Required uses maintained in U&E comp.; process reg. assessment for &1 |
| 113 | Registration status of supplier &1 requested |
| 114 | Only representative for supplier &1 requested |
| 115 | Complete material assessment check for specification &1 |
| 116 | Complete use determination check for material &1 |
| 117 | Assess uses that will not be registered with pure substance &1 |
| 118 | Uses of supplier &1 not registered |
| 119 | Compliance data key &1 for material &2 does not exist |
| 120 | Check data in lower level; cannot calculate compliance status of spec. &1 |
| 121 | Compliance status for &1 is manually set to &2; check reason &3 |
| 122 | Product part &1 is not compliant |
| 123 | Value for declarable &1 for &2 is inconsistent |
| 124 | Check compliance for product part &1; binding compliance date reached |
| 125 | Compliance status for component &1 has been set to &2 |
| 126 | Calculated weight for part &1 or component &2 is missing |
| 127 | Pure substance/substance group &1 does not exist or has been deleted |
| 128 | Homogeneous material &1 does not exist or has been deleted |
| 129 | Part &1 does not exist or has been deleted |
| 130 | BAdI &1 does not exist |
| 131 | Additional BOS structure information for substance &1 not found |
| 132 | Determination check is only possible for sold materials |
| 133 | Check completed; material assessment complete |
| 134 | Maintain the hazardousness for substance &1 |
| 135 | Use and exposure coverage check canceled |
| 136 | Use and determination check canceled |
| 137 | Enter uses or request use information from customers for material &1 |
| 138 | &1 check not necessary for materials defined as article |
| 139 | Check is possible for salable parts or intermediates only |
| 140 | Supplier &1 not available |
| 141 | Use and exposure data is not necessary for substance &1 |
| 142 | Customer &1 was informed about use and exposure |
| 143 | General campaign for business partner &1 started |
| 144 | Additional BOS structure info. for substance &1 material &2 not found |
| 145 | Active checks cannot be deactivated |
| 146 | Maintain the bulk nature of &1 |
| 147 | Maintain the material nature of product part &1 |
| 148 | Data inconsistency between article &2 and component &3 |
| 149 | Container &2 does not contain a substance as such |
| 150 | Customer sent use information; process data |
| 151 | Supplier sent use information; process data |
| 152 | Verify the declaration of the packaging for product &1 |
| 153 | Coverage check for specification &1 has not been executed |
| 154 | Component is set to not relevant for check |
| 155 | Article &2 does not contain an intentionally released substance |
| 156 | Maintain the uses for the monomer pure substance &1 |
| 157 | Check &1 is not necessary for materials defined as polymer |
| 158 | Assess the use of material &1 and customer &2 for relevance |
| 159 | Assess the use of material &1 for relevance |
| 160 | Could not lock uses for all spec. within spec. &1 (check &2) |
| 161 | Maintain pure substance for notification in composition of material &1 |
| 162 | Check &1 is not necessary for materials that are not REACH-relevant |
| 163 | Check &1 is not necessary for materials that are exempt from REACH |
| 164 | Check &1 can only be processed on substances with materials assigned |
| 165 | Check &1 is not necessary for materials defined as article |
| 166 | Assess additional uses for pure substance &1 in a follow-up registration |
| 167 | Required uses maintained in composition; check reg. decision for &1 |
| 168 | Assess additional uses for pure substance &1 in the active reg. project |
| 169 | Assess additional uses for pure substance &1 in a follow-up registration |
| 170 | Error in conversion of messages to PCBO structure |
| 171 | Error in updating workflow and/or workflow items |
| 172 | No settings for Supply Chain Coll. in Customizing for check &1 |
| 173 | Unit &1 is not allowed for the exemption limit |
| 174 | Correct error in subordinate product structure |
| 175 | Correct warning in subordinate product structure |
| 176 | Regulatory list assignment already exists - &1 |
| 177 | &2 &1: invalid exemption &3 for substance &4 removed |
| 178 | &2 &1: expired exemption &3 assigned for substance &4. |
| 180 | Add an application code for &1 - listed substance &2 |
| 181 | &1 is an article; correct the article classification |
| 182 | &2 &1: hidden application code &3 assigned for substance &4. |
| 185 | . |
| 190 | No settings in Customizing for consistency check |
| 191 | Check function does not implement the check interface |
| 192 | An exception occured while executing check: &1 |
| 198 | Index for regulated substance/groups is outdated; execute report &1 |
| 199 | Product structure contains a hidden specification |
| 200 | Identifier for "IMDS Standard Material Number" is not maintained |
| 201 | No CAS number (NUM/CAS) exists |
| 202 | No supplier number (NUM/SUPPLIER) exists |
| 203 | No pure substance name (NAM/PURE) exists |
| 204 | No pure substance number (NUM/PURE) exists |
| 206 | Assess incomplete substance declaration for basic material &1 |
| 209 | Assess component(s) &1 &2 &3 &4 for current reg. list revision |
| 220 | Check &1 uses a normalization with re-rollup; not supported |
| 221 | Check aborted due to inconsistent data |
| 240 | Assess prohibited substances for basic material &1 |
| 300 | ------------------------------ BOS-Explosion ---------------------------- |
| 301 | No entry could be found for the given KEY (&1) |
| 302 | Specification &1 has multiple composition instances using the same usage |
| 303 | Supplier spec. listing &1 is specified in illegal composition group &2 |
| 304 | Cannot find history XML file &1; Object &2 |
| 306 | Assess incomplete substance declaration for component &1 |
| 310 | Material category of the checked object is not check relevant |
| 313 | &2 &1: verify and upload the required document of type &3 |
| 314 | &2 &1: verify and generate the required document of type &3 |
| 315 | History XML file &1 for &2 is empty; product structure view is empty |
| 340 | Assess prohibited substances for component &1 |
| 344 | Component &1: create substance declaration or composition |
| 406 | Material &1 with manual declaration: assess incomplete substance decl. |
| 440 | Assess prohibited substances for material &1 with manual declaration |
| 444 | Verify or create substance decl. for material &1 with manual declaration |
| 506 | Assess incomplete substance declaration for release relevant material &1 |
| 540 | Assess prohibited substances for release relevant material &1 |
| 544 | Verify substance declaration for release relevant material &1 |
| 750 | &2 &1: Verify manual declaration; changes in the lower levels |
| 806 | Assess incomplete subst. declaration for non-release relev. material &1 |
| 840 | Assess prohibited substances for non-release relevant material &1 |
| 844 | Verify substance declaration for non-release relevant material &1 |