EHPRC_CPM_IMPORT - Import Messages
The following messages are stored in message class EHPRC_CPM_IMPORT: Import Messages.
It is part of development package EHPRC_CP_CORE in software component EHS-MGM-PRC. This development package consists of objects that can be grouped under "Compliance for products".
It is part of development package EHPRC_CP_CORE in software component EHS-MGM-PRC. This development package consists of objects that can be grouped under "Compliance for products".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Material number in data file &1 is not the same as in PC &2 |
| 002 | Mapping for incoming template &1 does not exist |
| 003 | Mapping for incoming template &1, segement &2, field &3 does not exist |
| 004 | Segment fields for incoming template &1, segment &2 not filled |
| 005 | No errors occurred; import &1 complete |
| 006 | Material type not defined for segment field &1 &2 |
| 007 | Value is missing or invalid; segment &1, field &2, description &3 |
| 008 | Import mode for material category &1 is set to "No Import"; imp. &2 &3 |
| 009 | No import mode for import &1, material category &2 |
| 010 | Warnings occurred during the import; &1 |
| 011 | Errors occurred during the import; &1 |
| 012 | Import not complete; check file &1 for errors |
| 013 | Import &1 processed |
| 014 | "Locked for Import" checkbox was selected &1 &2 &3 |
| 015 | Spec. &1 is blocked for import; cannot process specification |
| 016 | IMDS version in file &1 is older than the one which exists &2 |
| 017 | Cannot assign organization unit &1 to any suppliers |
| 018 | File &1 is not an import file &2 |
| 019 | Import of template &1 stopped |
| 020 | No exact assignment to material category &1 and identifier &2 possible |
| 021 | No field in segment &1 for the average value defined |
| 022 | No field in segment &1 for the unit defined |
| 023 | No field in segment &1 for the bulk mass defined |
| 024 | No field in segment &1 for the bulk unit defined |
| 025 | Exemptions for regulatory list &1 are only allowed on the lowest product |
| 026 | Exemption handling for regulatory list &1 is invalid |
| 027 | Certification data is incomplete or not available &1 &2 |
| 028 | Regulatory list is needed for declarable substances |
| 030 | Material category &1, spec. &2 &3 &4; see chapter in import file |
| 031 | Message displayed for the following mapping field &1 &2 &3 &4 |
| 032 | Structure is recursive; cannot be processed &1 &2 &3 &4 |
| 033 | Checks are running |
| 034 | Checks are finished |
| 035 | Configuration is wrong (&4): import category &1, segment &2, field &3 |
| 036 | Configuration is wrong (&1): import category &2 |
| 040 | Line in import file is longer than 1000 characters (1000 = max.) |
| 060 | Manufacturer &1 not created; check your entries |
| 061 | PDM system &1 not created; check your entries |
| 062 | Customer &1 not created; check your entries |
| 063 | Mandatory attribute &1 of the element &2 not filled |
| 064 | Product number &1 not found in the system |
| 065 | PDM system &1 not determined |
| 066 | Manufacturer not found (ID &1, name &2) |
| 100 | Same or newer document version already exists |
| 101 | Document with same or newer date already exists |
| 102 | Release status of generation variant must be "Released" |
| 103 | File does not exist or cannot be opened |
| 104 | Path |
| 105 | Invalid generation variant; use input help for selection |
| 106 | Validity date &1 must be greater than &2 |
| 107 | Variant |
| 108 | Description |
| 109 | Substance is not valid for validity date |
| 110 | Invalid validity date; check format |
| 111 | Cannot attach document to report header |
| 112 | Upload terminated with exception |
| 113 | Cannot upload file; may be in use in another application |
| 114 | Error while reading the file |
| 115 | Component &1 is faulty; dependent specifications not imported |
| 116 | Specifications &1 not imported (faulty component) |
| 117 | Specification occurs with a higher version in the file &1 |
| 118 | Material number changed from &1 to &2 |
| 119 | There are no files attachted to task &1 that can be imported |
| 130 | Incoming template &1 does not exist; check Customizing settings |
| 131 | File type &1 is not allowed for incoming template &2 |
| 132 | No Customizing entries for &1 |
| 133 | Invalid extension (file name &1) |
| 134 | Customizing error; no APPL entry |
| 135 | Customizing error; document type &1 does not exist in the system |
| 136 | No document type entry in the interface type &1 |
| 137 | Specified file does not match the import interface type &1 |
| 138 | "Case" implementation missing for &1 |
| 139 | Invalid interface type; use input help for selection |
| 140 | Cannot import file; Customizing entries for interface &1 missing |
| 141 | Cannot calculate the rest (sum > 100%) |
| 142 | Rest calculation is carried out only for percent units; &1 |
| 143 | Declarable substance &1 not found |
| 144 | Homogeneous basic material &1 not found |
| 145 | Select only one entry for the simulation |
| 146 | Error occurred during simulation |
| 147 | Material category &1 does not match specification, category &2 (SUBID &3) |
| 148 | Specification &1 was not found |
| 149 | Product number not checked &1 &2 &3 &4 |
| 150 | Attribute LocalID &1 already used for another object |
| 151 | Data file does not match the specified file type (&1 / &2) |
| 152 | Validation of data file against file type failed |
| 153 | PartID &1 for declarable pure substances not found |
| 154 | Import processed (total records: &1; with errors: &2) |
| 155 | Request &1 was not imported due to errors |
| 156 | Cannot identify supplier within the XML response file |
| 157 | Supplier &1 of supplier part does not match supplier &2 in XML response |
| 158 | Segment &1 field &2 is not defined as object identifier for template &3 |
| 159 | Supplier part not found for supplier &1, MPN &2, and material &3 |
| 160 | Substance ID not specified for compliance data object &1 |
| 161 | Multiple listed substances found for CAS number &1 |
| 162 | Multiple listed substances found for name &1 |
| 163 | Listed substance not found (ID: &1, CAS Number: &2, Name: &3) |
| 164 | No listed substance found in import file for regulatory list &1 |
| 165 | CAS number does not match listed substance &1 |
| 166 | Name does not match listed substance &1 |
| 167 | Compliance status &1 not allowed for regulatory list &2 |
| 168 | Substance &1 stated to be absent, but additional attributes are filled |
| 169 | Cannot find concentration value for substance &1 &2 |
| 170 | Regulatory list &1 does not allow classification codes |
| 171 | Classifcation &1 not allowed for regulatory list &2, material category &3 |
| 172 | Listed substance &1 &2 does not exist in regulatory list &3 |
| 173 | Exemption '&1' not allowed for listed substance '&2' in reg. list '&3' |
| 174 | Exemption '&1' is expired for listed substance '&2' in reg. list '&3' |
| 176 | Listed substance &1 removed from regulatory list revision &2 |
| 177 | Reading of listed substances failed |
| 178 | Reading of exemptions failed |
| 179 | Could not update listed substances in regulatory list revision &1 |
| 180 | Exemption &1 could not be imported due to errors |
| 181 | Exemption code is missing; import of record &1 skipped |
| 182 | Exemptions could not be imported due to a save error |
| 183 | Determination for listed substance &1 failed |
| 184 | Error on processing listed substance &1 |
| 185 | Exemption substance relations could not be imported due to errors |
| 186 | Import skipped; multiple listed substances assigned to IMDS node ID &1 |
| 187 | Key data for exemption substance relation (&1) is missing |
| 188 | Exemption &1 is missing; import of record &2 skipped |
| 189 | Exemption substance relations could not be imported due to a save error |
| 190 | Regulatory list revision determination for &1 failed |
| 191 | Listed substance &1 does not exist; import of record &2 skipped |
| 192 | Listed substances assigned to IMDS node ID &1 does not exist |
| 193 | Listed substance &1 could not be imported due to errors |
| 194 | Listed substances could not be imported due to a save error |
| 195 | Regulatory list revision &1 is locked |
| 196 | Listed substance for &1 is locked |
| 197 | Listed substance &1 created |
| 198 | Listed substance &1 updated |
| 199 | Regulatory list revision &1 updated |
| 200 | Reference object &1 not available in the XML (material category: &2) |
| 201 | Import field for supplier number not defined (import category &1) |
| 202 | Mat. category ref. object &1 does not match mat. category of object &2 |
| 203 | XML parse error: line &1, column &2, offset &3 |
| 204 | XML parse error; reason: &1 |
| 205 | Generic identifier &1 is not accepted |
| 206 | Class &1 does not contain characteristic &2 |
| 207 | Characteristic &1 of the generic property &2 is not permitted |
| 208 | Reference to specification with the key &1 cannot be found |
| 209 | Error while writing the document attachments for import &1 |
| 210 | File name &1 does not match the selected file name &2 |
| 211 | Characteristic &1 cannot be automatically converted |
| 212 | More than one harmonized product number found &1 &2 |
| 213 | File &1 is bigger than &2 bytes; cannot be processed |
| 214 | Code page for conversion is missing |
| 215 | Code page of file does not match encoding tag of XML |
| 216 | Import of MDS/module &1 failed |
| 217 | &1 source file(s) determined |
| 218 | Application log created |
| 219 | Compliance object for object &1 with ID &2 is locked |
| 220 | Check regulatory list &1 that does not exist in the system |
| 221 | Wrong supplier part (MPN &1, Material &2) in the file; chose another file |
| 222 | Material category &1 and &2 on the same level not allowed (&3) |
| 223 | NodeID &1: OrgID &2 not found, update IMDS Organizations |
| 224 | NodeID &1: PersID &2 not found, update IMDS Organizations |
| 225 | NodeID &1: MDS not found |
| 226 | NodeID &1: MDS is locked, start import again later |
| 227 | NodeID &1: Data move successful |
| 228 | NodeID &1: Data move not necessary (already up-to-date) |
| 229 | NodeID &1: Receiver &2 not found |
| 230 | Company and contact data validation |
| 231 | Owner change records (segment 'OC') |
| 232 | Receiver change records (segment 'RC') |
| 233 | NodeID &1: Data move is outdated |
| 234 | NodeID &1: Data move has set deletion indicator for own MDS |
| 235 | Validation of confidential substance of high concern (CSHC) |
| 236 | NodeID &1: Published MDS not found in Supplier Center |
| 237 | NodeID &1: Received MDS not found in Supplier Center |
| 238 | NodeID &1: MDS &2 isn't successfully imported |
| 239 | NodeID &1: CDO for IMDS material &2 not found |
| 240 | Confidential substance of high concern records (segment 'CSHC') |
| 241 | NodeID &1: Specification &2 is locked, try it later again |
| 242 | NodeID &1: Confidential substance in IMDS material &2 changed |
| 243 | IMDS article category &1 doesn't match any SCIP article category. |
| 244 | Validation of SCIP number change in own/received MDSs (SNC) |
| 245 | Validation of SCIP number change in published MDSs (SNCP) |
| 246 | SCIP number change records (segment 'SNC') |
| 247 | NodeID &1: Compliance object is locked by "&2" |
| 248 | NodeID &1: SCIP number change successful |
| 249 | NodeID &1: SCIP number change not necessary (already up-to-date) |
| 250 | NodeID &1: SCIP number change is outdated |
| 251 | NodeID &1: Own MDS &2 wasn't successfully imported |