EMMA - �berwachung von Massenl�ufen
The following messages are stored in message class EMMA: �berwachung von Massenl�ufen.
It is part of development package FKKMM in software component FI-CA-BF. This development package consists of objects that can be grouped under "EMMA: Enhanced Message Management".
It is part of development package FKKMM in software component FI-CA-BF. This development package consists of objects that can be grouped under "EMMA: Enhanced Message Management".
Message Nr ▲ | Message Text |
|---|---|
| 001 | &1 &2 &3 is being processed in &4 mode |
| 002 | End of processing of &2 &3 |
| 003 | You do not have authorization for the required action |
| 004 | No transaction code was found for selected job type &1 &2 &3 &4 |
| 005 | Transaction &1 is not supported |
| 006 | No interval exists |
| 007 | No message found for the selected job |
| 008 | Transaction code &1 is not assigned to a case type |
| 009 | Case type is not active |
| 010 | Case creation was already processed for job &1 |
| 011 | Start business process &4 for &1 &2 in business process area &3 |
| 012 | End business process &4 for &1 &2 in business process area &3 |
| 013 | No application log found for job &1 |
| 014 | No job found for selection criteria specified |
| 015 | Job must first be prepared |
| 016 | Enter a valid message class for the mass run |
| 017 | No message found |
| 018 | No business object found - check the mass run interval |
| 019 | Choose a mass run |
| 020 | Job already prepared; check status of job |
| 021 | No business objects found - check the message text |
| 022 | No variable found in the message |
| 023 | No business object found |
| 024 | &1 job runs selected, &2 job runs prepared |
| 025 | Transaction &1 is not supported by monitoring |
| 026 | Only prepared mass runs can be deleted |
| 027 | &1 job runs selected, &2 job runs and &3 clarification cases deleted |
| 028 | Select either prepare or delete |
| 029 | Enter date ID, run date or both |
| 030 | Enter a value in at least one field |
| 031 | &1 job runs selected, &2 prepared, &3 clarification cases generated |
| 032 | Enter a valid reason |
| 033 | No clarification case created for job &1 |
| 034 | No clarification case exists for job &1 |
| 035 | No entry found |
| 036 | Enter current user or organizational unit |
| 037 | Enter either current user or organizational unit |
| 038 | Specify both object category and ID |
| 039 | Clarification cases with status 'In Progress' cannot be accepted |
| 040 | Clarification case &1 not changed, contact your system administrator |
| 041 | Cases could not be returned to worklist; notify administrator |
| 042 | Action cancelled by user |
| 043 | Clarification case was not forwarded; status &1 does not permit this |
| 044 | System error reversing clarification cases |
| 045 | &1 clarification cases not returned to worklist |
| 046 | Clarification case &1 has already been put back in the worklist |
| 047 | Job &1 cannot be prepared again; check case status |
| 048 | Select an interval |
| 049 | Clarification case &1 cannot be accepted; status invalid |
| 050 | Case &1 cannot be accepted; processor already entered |
| 051 | System error accepting clarification cases |
| 052 | Clarif. case &1 cannot be returned to worklist; status does not permit |
| 053 | Clarification case &1 was not forwarded; status does not permit this |
| 054 | System error forwarding clarification cases |
| 055 | Clarification case &1 forwarded |
| 056 | Clarification case &1 returned to worklist |
| 057 | Clarification cases forwarded |
| 058 | Clarification cases returned to worklist |
| 059 | Clarification case &1 accepted |
| 060 | Clarification cases accepted |
| 061 | First select one or more clarification cases |
| 062 | Object &1 &2 with element names '&3' deleted from case &4 |
| 063 | No clarification cases accepted |
| 064 | No clarification cases forwarded |
| 065 | No clarification cases returned to worklist |
| 066 | Clarification case can only be changed in status 'New' or 'In Progress' |
| 067 | System error returning clarification cases to worklist |
| 068 | Object &1 &2 with element names '&3' for case &4 do not exist |
| 069 | System error confirming clarification case &1 |
| 070 | Clarification case &1 cannot be confirmed; status invalid |
| 071 | Clarification case &1 confirmed |
| 072 | System error reopening clarification case &1 |
| 073 | Clarification case &1 cannot be reopened; status invalid |
| 074 | Clarification case &1 cannot be reversed; status invalid |
| 075 | Clarification case &1 reversed |
| 076 | Case &1 cannot be forwarded; no processor entered |
| 077 | Choose Prepare Jobs or Delete Preparations |
| 078 | Choose either Delete Preparations or Create Clarification Cases |
| 079 | &1 clarification cases accepted and &2 cases not accepted |
| 080 | &1 clarification cases accepted and &2 clarification cases not processed |
| 081 | &1 clarification cases not processed and &2 clarification cases rejected |
| 082 | &1 cases accepted, &2 cases rejected, and &3 cases not processed |
| 083 | No message object for variable &3 found in message &1 &2 |
| 084 | You cannot forward a case to yourself |
| 085 | Clarification cases for job &1 cannot be deleted; check the cases |
| 086 | No business process is assigned to transaction code &1 |
| 087 | Job processed in mode &1 |
| 088 | Business process area &1 is not supported by EMMA |
| 089 | Business process area &1 is not relevant for BW process management |
| 090 | Clarification cases can only be created for prepared jobs |
| 091 | Business process code &1 is not supported by EMMA |
| 092 | Clarification cases can only be deleted for prepared jobs |
| 093 | Selection criteria are invalid; check the criteria |
| 094 | Transaction code &1 is not assigned to a business process code &2 |
| 095 | Method &1 is not implemented in class &2 |
| 096 | No application log found for job &1 |
| 097 | Interface &1 not implemented in class &2 yet |
| 098 | Clarification cases confirmed |
| 099 | Select job types to be processed |
| 100 | ===== Dialog messages ====== |
| 101 | No business object found for message &1 &2. |
| 102 | Error when calling up method &1 of object type &2 for object &3 |
| 103 | &1 &2 does not exist |
| 104 | No object assigned to message pool of case category &1 |
| 105 | No message assigned to case category &1 |
| 106 | Process case categories in the view cluster VC_EMMAC_CCAT |
| 107 | Following messages were not used for creating cases |
| 108 | [&1] &2: &3&4 |
| 109 | Business object &1 &2 from message &3(&4) does not exist |
| 110 | Complex condition for case category &1 is incorrect |
| 111 | Condition for case category &1 and priority &2 is incorrect |
| 112 | Due date could not be calculated; original date unknown |
| 113 | Select clarification cases for process execution |
| 114 | &1 clarification cases selected |
| 115 | Data was changed; save the changes |
| 116 | Case category &1 saved |
| 117 | Transaction codes &2 and &3 for case type &1 are incompatible |
| 118 | No business object type maintained for business process &1 |
| 119 | Case category &2 is already being processed by user &1 |
| 120 | Case category &1 deleted |
| 121 | '&1' in data flow &2->&3 does not exist |
| 122 | Condition for case category &1 and priority &2 is not defined |
| 123 | Printout &1 in the data flow definition could not be evaluated |
| 124 | View cluster maintenance was replaced by a maintenance transaction |
| 125 | Case category &1 included in Customizing task &2 |
| 126 | You cannot change or delete the primary business object |
| 127 | Business process code &1 is not defined |
| 128 | At least one message must be checked |
| 129 | No complex condition defined |
| 130 | Primary business object can only be used in business object-spec. categys |
| 131 | Message &1(&2) not defined in message pool |
| 132 | Check whether message &1(&2) exists |
| 133 | No errors found in case category &1 |
| 134 | Case category &1 is defective and can only be saved deactivated |
| 135 | Check of case category &1 resulted in warnings |
| 136 | Container element '&1' is not filled |
| 137 | Container element &1 does not exist in the data flow of the message pool |
| 138 | Business process area &1 is not defined |
| 139 | Clarification case category &1 requires a primary business object |
| 140 | Closed business object &1 &2 was not opened |
| 141 | Primary business process &1 was closed |
| 142 | Business object &1 &2 was not closed |
| 143 | Select only one checkbox |
| 144 | Select a valid solution process |
| 145 | Dialog methods cannot be executed automatically |
| 146 | Import parameter '&1' is not filled |
| 147 | Role container element '&1' is not filled |
| 148 | No internal number range interval created |
| 149 | No class implemented for forwarding method &1 |
| 150 | Create a description of the clarification case category |
| 151 | Icon was transferred from the Action Box definition |
| 152 | Reference busiiness object for message &1(&2) not known until runtime |
| 153 | No (further) message objects found |
| 154 | &1 new objects added |
| 155 | '&1' in long text is not an attribute of '&2' |
| 156 | '&1' in long text is not a valid case object |
| 157 | Variable was stored |
| 158 | &1 messages selected for processing |
| 159 | &1 pure formatting messages rejected |
| 160 | &1 messages suppressed in Customizing |
| 161 | Mass activity &1 not completely maintained for transaction &2 |
| 162 | System error when closing clarification case &1 |
| 163 | Data flow &1->&2 is incorrect |
| 164 | Only primariy object attributes can be used in Action Box calls |
| 165 | Use desktop object <DESKOBJ>&1 instead of &2 |
| 166 | Unable to close any of the &1 cases you selected |
| 167 | No clarification cases closed |
| 168 | Of those, the following &1 cases cannot be closed: |
| 169 | Clarification cases closed |
| 170 | Unable to reopen any of the &1 cases you selected |
| 171 | No clarification cases reopened |
| 172 | Thereof, following &1 cases cannot be reopened: |
| 173 | Unable to reverse any of the &1 cases selected by you |
| 174 | No clarification cases reversed |
| 175 | Thereof, following &1 cases cannot be reversed: |
| 176 | Functional methods are not supported in expressions |
| 177 | &1 messages combined for start and end of business process |
| 178 | Job &1 created |
| 179 | Class &1 does not inherit from superclass &2 |
| 180 | ========= Clarification case transaction ================ |
| 181 | Use complex conditions only for business-object-specific categories |
| 182 | Multiple cases only useful for business-object-specific categories |
| 183 | &1 jobs meet the selection criteria |
| 184 | First delete the &1 clarification cases for job &2&3 |
| 185 | Business object type &1 incompatible with business process code &2 |
| 186 | Execution of first solution process must always be possible |
| 187 | Solution process cannot be executed yet |
| 188 | Manual clarification cases cannot be deleted |
| 189 | Employee &1 with object key &2 does not exist for case &3 |
| 190 | A job was already created for job log &1 |
| 191 | No case found with status 'New' or 'In Processing' |
| 192 | No case found with status 'New' or 'In Processing' (interval &1) |
| 193 | Error during execution of forwarding method &1 |
| 194 | A BPEM job has been created for the runtime error with TID &1 |
| 195 | Runtime error &1 in &2 with the exception &3 (ID &4) |
| 196 | Date &1 / Time &2 / User &3 / Transaction ID &4 |
| 197 | &1 runtime errors registered in &2 BPEM jobs |
| 198 | &1 runtime errors in &2 BPEM jobs registered (&3 identical cases) |
| 199 | Method &2 not implemented for BAdI &1 |
| 200 | &1 cases could not be confirmed: |
| 201 | Status cannot be set for clarification case &1 |
| 202 | Status cannot be changed from &1 to &2 |
| 203 | Rule &2 for processor determination could not be released for case &1 |
| 204 | No processor rule or forwarding method used |
| 205 | Case category &2 does not exist for clarification case &1 |
| 206 | &1 clarification cases generated for job &2 |
| 207 | No case created for category &1 created, identical case &2 exists |
| 208 | No active case category found for business process &1 |
| 209 | Case category &1 processed |
| 210 | Clarification case &1 is locked by user &2 |
| 211 | Container element &2 (&3 &4) could not be assigned to case &1 |
| 212 | Object is not a business object and therefore cannot be displayed |
| 213 | You are not authorized to create clarification cases |
| 214 | Clarification case &1 not found |
| 215 | Clarification case &1 changed |
| 216 | Clarification case &1 created |
| 217 | Error creating clarification case &1 |
| 218 | Error creating case objects for case &1; case not saved |
| 219 | Error changing clarification case &1; case not saved |
| 220 | Clarification case &1 not forwarded to processor &2 |
| 221 | Clarification case &1 has not been returned to the worklist |
| 222 | No changes made |
| 223 | First select an object |
| 224 | Primary business object cannot be deleted |
| 225 | Specify case category |
| 226 | Case type &1 not found |
| 227 | Case category &1 is deactivated and cannot be used |
| 228 | Manual case category &1 not found |
| 229 | Error updating log for clarification case &1 |
| 230 | You are not authorized to process the case |
| 231 | Case type &1 is not identical to case type &2 for case &3 |
| 232 | Case category &1 is not identical to case category &2 for case &3 |
| 233 | Error changing log; clarification case &1 was not changed |
| 234 | You are not authorized to display the case |
| 235 | Case type &1 does not exist |
| 236 | Case type &1 is not active |
| 237 | Case category &1 already exists |
| 238 | BAPI function module started in simulation mode |
| 239 | Message class &1 with number &2 does not exist |
| 240 | Business object &1 with key &2 does not exist |
| 241 | No authorization for authorization group &1 |
| 242 | Error creating clarification case |
| 243 | No entries found in log |
| 244 | Enter a valid reference table and field |
| 245 | Clarification case &1 has no process &2 |
| 246 | Enter a valid business object |
| 247 | Enter a valid business object category |
| 248 | Case object with element name &1 is invalid |
| 249 | Process terminated by user |
| 250 | Priority &1 is invalid |
| 251 | Case category &1 not found |
| 252 | Primary business object can only be changed for manual cases |
| 253 | System error deleting case category &1 |
| 254 | Business object cannot be displayed |
| 255 | You are forwarding the clarification case to user &1 |
| 256 | No shortcut buttons defined |
| 257 | Layout &1 does not exist for shortcut keys |
| 258 | No variant or class defined for shortcut &1 |
| 259 | Management of cases via Case Management is not supported |
| 260 | Due date and time will be recalculated |
| 261 | Specify a valid forwarding reason |
| 262 | Case &1 set to status 'In Progress' and saved |
| 263 | User &1 entered as processor |
| 264 | User &1 entered as processor; due date will be recalculated |
| 265 | Clarification case &1 cannot be accepted |
| 266 | No authorization for authorization group &1; only display possible |
| 267 | Clarification case is closed; only display possible |
| 268 | Clarification case could not be reopened |
| 269 | Clarification case &1 reopened |
| 270 | Clarification case reversed; only display possible |
| 271 | Clarification case has been reversed automatically; only display possible |
| 272 | Status cannot be changed; processor has been changed |
| 273 | Specify a reason for returning the clarification case to the worklist |
| 274 | Specify a reason for forwarding clarification case |
| 275 | Do not specify case category or case template |
| 276 | Specify case category |
| 277 | Specify either case categoy or case template |
| 278 | Entered data is incomplete or incorrect |
| 279 | Case type &1 is not supported for manually creating cases |
| 280 | Clarification case &1 is confirmed; only display possible |
| 281 | Specify the new processor |
| 282 | None of the &1 cases you selected can be confirmed |
| 283 | Clarification case could not be reopened |
| 284 | Error executing process |
| 285 | Error in the data flow during execution of the process |
| 286 | You have selected &1 clarification cases |
| 287 | &1 cases cannot be accepted |
| 288 | None of the &1 cases that you selected can be accepted |
| 289 | The following &1 cases cannot be forwarded |
| 290 | None of the &1 cases that you selected can be forwarded |
| 291 | Following &1 cases could not be returned to the worklist |
| 292 | None of the &1 cases you selected can be returned to the worklist |
| 293 | You are not authorized to accept clarification cases |
| 294 | You are not authorized to forward clarification cases |
| 295 | You are not authorized to return clarification cases to the worklist |
| 296 | No processors assigned |
| 297 | Process successfully executed |
| 298 | Error in data flow of the process; configuration &1, call &2 |
| 299 | =============== Messages for action log ==================== |
| 300 | &2 user &3, &4 |
| 301 | &2 note entered |
| 302 | Status changed from &1 to &2 |
| 303 | &3 clarification case forwarded from &1 to &2 |
| 304 | &3 reason for forwarding: &1 (&2) |
| 305 | &3 clarification case &1 has been returned to the worklist |
| 306 | &2 business object &1 removed |
| 307 | &2 field value &1 removed |
| 308 | Use other process categories instead of action box calls |
| 309 | Priority changed from &1 to &2 |
| 310 | Due date changed from &1 &2 to &3 &4 |
| 311 | Original date of clarification case changed from &1 &2 to &3 &4 |
| 312 | &2 business object &1 added |
| 313 | &2 field value &1 added |
| 314 | &3 &4 process '&1' executed by user &2 |
| 315 | &2 accepted by user &1 |
| 316 | &2 clarification case reopened |
| 317 | &3 accepted by user &1; executed by user &2 |
| 318 | &2 clarification case confirmed |
| 319 | Automatic processes cannot be executed |
| 320 | &3 &4 process '&1' automatically executed by user &2 |
| 321 | &4 &1 changed from '&2' to '&3' |
| 322 | Job &1 is locked by user &2 |
| 323 | Job &1 cannot be analyzed - Customizing missing in table &2 |
| 324 | Object &1 &2 is not used in any other clarification case |
| 325 | &1 jobs selected for interval &2 of value range &3 to &4 |
| 326 | &1 intervals created |
| 327 | Job &1 with interval &2 selected for process |
| 328 | For RUNID &1 interval number &2, &l logs selected for process |
| 329 | Processor assignment &1 &2 inserted |
| 330 | Processor assignment &1 &2 removed |
| 331 | Text name &1 not found |
| 332 | The due date/time is before the original date/time |
| 333 | &2 clarification case &1 was created |
| 334 | &3 message &1(&2) was added or changed |
| 335 | &3 message &1(&2) was removed or changed |
| 336 | &3 &4 process '&1' have been skipped |
| 337 | &3 &4 process '&1' and subsequent processes have been skipped |
| 340 | Processing terminated by user |
| 341 | Snapshot archived |
| 342 | Retention period reached |
| 343 | Clarification case is archived. Only display possible |
| 350 | Job analysis already prepared by &2 on &3 at &4 |
| 351 | Job analysis was deleted and prepared again |
| 352 | Case generation for job &2 reset; &1 clarification cases deleted |
| 354 | Maintain class &1 for the application log in &2 |
| 355 | Class &1 derived for processing messages from table &2 |
| 356 | Job &1 prepared by user &2 on &3 at &4 deleted |
| 357 | Class not entered for job analysis for business prozess &1 |
| 358 | Customizing for job &1 derived from transaction code &2 |
| 359 | No Customizing defined for transaction code &1 |
| 360 | Class &1 derived for processing messages from business process code &2 |
| 361 | Class is not entered for job analysis for transaction &1 |
| 362 | Job &1 can only be prepared using the classic EMMA transaction |
| 363 | Maximum number of hits must be at least 1 to save variant |
| 365 | Transaction &1 is obsolete. Please use EMMAJL or EMMAJP |
| 370 | Parameters are mutually exclusive - fill either TEST_RUN or CHECK_MODE |
| 371 | Enter a valid reversal reason for status 'Reversed' |
| 372 | You do not have authorization for displaying &1 clarification cases |
| 373 | You do not have authorization to analyze job logs of other users |
| 375 | In &1 cases, the following messages are output: |
| 381 | Parameter &2 must be supplied with method &1 |
| 382 | Method &1 expects the data either in version 2 or 4 |
| 383 | No log found for EXTNUMBER &1 |
| 388 | The changed objects have been included in transport request &1. |
| 399 | &2 objects were processed in the interval, of those &1 successfully |
| 410 | Substatus &1 is invalid for clarification case status &2. |
| 501 | Clarification case &1 cannot be used as a template |
| 502 | No authorization to create a category &1 clarification case |
| 601 | Error in parameter &1: &2 |
| 800 | ***** Example messages for IDocs ***** |
| 801 | Status: &1 |
| 802 | Direction: &1 |
| 803 | Parameters of error message |
| 804 | Details for control entry for IDoc &1 |
| 805 | Status entries for IDoc &1 |
| 851 | ***** Messages for mass activities ***** |
| 852 | &2 logs for interval &1 selected for processing |
| 853 | &1 business objects processed |
| 854 | Start of processing of interval &1 |