FCC0 - Messages in Financial Closing Cockpit
The following messages are stored in message class FCC0: Messages in Financial Closing Cockpit.
It is part of development package FCC_CLOSING in software component CA-GTF-FCC. This development package consists of objects that can be grouped under "Financial Closing Cockpit - SAPGUI and backend".
It is part of development package FCC_CLOSING in software component CA-GTF-FCC. This development package consists of objects that can be grouped under "Financial Closing Cockpit - SAPGUI and backend".
Message Nr ▲ | Message Text |
|---|---|
| 000 | & & & & |
| 001 | Template/task list & already exists |
| 002 | Deletion of Fast Close tables with error code: & |
| 003 | Template & saved successfully |
| 004 | Template & is locked by user & |
| 005 | Template & does not exist |
| 006 | Task list in template & for key data & does not exist |
| 007 | User & does not exist |
| 008 | Offset & falls outside of permitted range from -5 through +5 |
| 009 | Task & scheduled successfully |
| 010 | Preeding task & from & not yet executed successfully |
| 011 | % was not scheduled. Predecessor was not performed correctly |
| 012 | Cannnot execute task &1; task is active |
| 013 | Task & already scheduled. Scheduling currently not possible |
| 014 | Task & did not end with any errors. Scheduling therefore not possible |
| 015 | Save task list first |
| 016 | Task list from template &1/&2 is locked by user &3 |
| 017 | No authorization to change template & |
| 018 | Task list & does not exist |
| 019 | Task list & does not exist |
| 020 | Enter valid date |
| 021 | Specify profile name |
| 022 | Task list &1/&2 saved |
| 023 | Cannot unrelease task list &1/&2; task list already active |
| 024 | Template & & cannot be deleted. Check status. See long text |
| 025 | Task &: Scheduling not successful |
| 026 | Task &: Scheduling was successful |
| 027 | Enter valid time |
| 028 | No Office documents available |
| 029 | Fiscal year variant & is used |
| 030 | More than one fiscal year variant found. & is used |
| 031 | No fiscal year variant found |
| 032 | Closing type of task list from template & on & cannot be changed |
| 033 | Fiscal year variant & does not exist |
| 034 | Enter fiscal year variant |
| 035 | User canceled action |
| 036 | Action & for schedule & canceled by user |
| 037 | Task list is currently locked |
| 038 | Cannot change calendar of task list &1/&2 |
| 039 | Cannot delete task list &1/&2 |
| 040 | Task list &1/&2 already exists |
| 041 | An unknown database error occurred |
| 042 | Source and target task list &1/&2 are identical |
| 043 | Specify source |
| 044 | Object &/& is locked by a different user |
| 045 | You are not authorized to copy |
| 046 | You are not authorized to make changes |
| 047 | Task status does not permit changes |
| 048 | Not all dependencies could be built |
| 049 | Template/task list & cannot be processed |
| 050 | A note does not exist |
| 051 | No note or Office document found |
| 052 | Level & falls outside of valid range from & to & |
| 053 | Selected object & |
| 054 | Object cannot be changed in summarization mode & |
| 055 | Task & is locked by user & |
| 056 | |
| 057 | Not all tasks could be locked |
| 058 | No task to be changed |
| 059 | Task & was not yet started. Restart therefore not possible |
| 060 | |
| 061 | |
| 062 | |
| 063 | |
| 064 | Template &1 deleted |
| 065 | Task list &1/&2 deleted |
| 066 | Template & already exists. Use a different name |
| 067 | Template for task list& does not exist. Save canceled |
| 068 | Error in Office integration |
| 069 | Not all task lists could be locked |
| 070 | Error when loading mail function |
| 071 | |
| 072 | Inconsistencies occurred in company code & |
| 073 | No inconsistencies occurred in company code & |
| 074 | Document & & & was posted during the run. Run was canceled |
| 075 | Document & & &. & |
| 076 | |
| 077 | Parameter & is not relevant for task &. Task was not changed. |
| 078 | |
| 079 | Cannot delete task list &1/&2 |
| 080 | Template & cannot be deleted |
| 081 | No change authorization |
| 082 | Presetting has not been defined completely |
| 083 | Presetting is not valid for transaction &1 |
| 084 | |
| 085 | |
| 086 | |
| 087 | |
| 088 | |
| 089 | No authorization for Office document |
| 090 | Task lists already exist; conversion not possible |
| 091 | Enter a system or queue |
| 092 | Job definition does not contain the required parameters |
| 093 | Template does not contain any jobs; conversion not possible |
| 094 | Enter a job definition |
| 095 | System not defined |
| 096 | Queue not defined |
| 097 | |
| 098 | |
| 099 | No tasks selected |
| 100 | |
| 101 | |
| 102 | A system error has occurred |
| 103 | First close all other Office documents |
| 104 | Office document deleted |
| 105 | |
| 106 | No authorization for Office document class & of type & |
| 107 | Key date &1 falls outside of the factory calendar defined |
| 108 | Incorrect key date |
| 109 | |
| 110 | Scheduling is currently active for user &. Please try later |
| 111 | Not all folders could be locked |
| 112 | Test run: & is already active. Scheduling currently not possible |
| 113 | Test run: & is already scheduled. Scheduling in update run not possible |
| 114 | Test run: & completed w/o errors. Scheduling in update run not possible |
| 115 | Task & is locked by user & |
| 116 | Selected tasks are locked by user & |
| 117 | You are not authorized to change task list &1/&2 |
| 122 | Org. unit doesn't belong to the parent org. unit |
| 133 | &1 (task &2/&3/&4) |
| 135 | |
| 136 | |
| 137 | User &1 has no display authorization for template &2 |
| 138 | User &1 has no change authorization for template &2 |
| 139 | User &1 has no authorization for resetting the status |
| 140 | User &1 has no authorization for changing the task status |
| 141 | User &1 has no authorization for blocking the task |
| 142 | User &1 has no authorization for unblocking the task |
| 143 | User &1 has no authorization for changing assignments |
| 144 | User &1 does not have authorization to execute template &2 |
| 145 | |
| 146 | |
| 147 | |
| 148 | |
| 149 | |
| 150 | Use of monitor (GANTT chart) is not allowed |
| 151 | |
| 152 | |
| 153 | |
| 154 | |
| 155 | |
| 156 | |
| 157 | Role &1 does not exist |
| 158 | |
| 159 | |
| 172 | Templates cannot be selected |
| 173 | Task lists cannot be selected |
| 174 | |
| 175 | |
| 176 | |
| 177 | |
| 178 | Name of task list (&) falls in SAP namespace |
| 179 | & is a template. Tasks from templates cannot be scheduled |
| 187 | Another FCC_COPY_LOGS or FCC_MIGRATE_LOGS_TO_AL report is running. |
| 198 | Automatic update is deactivated |
| 199 | Automatic update is activated |
| 200 | Task list & created successfully |
| 201 | Org. unit value does not exist: & |
| 202 | Component & not found in structure/table & |
| 203 | |
| 204 | |
| 205 | |
| 206 | |
| 207 | |
| 208 | |
| 209 | |
| 210 | Task list & deleted successfully from the database |
| 211 | |
| 212 | Transfer parameter & not specified |
| 220 | Task list & successfully reworked |
| 221 | Predecessor &1 of task &2 has status '&3'; task &4 started |
| 222 | Predecessor &1 of task &2 has status '&3'; task &4 canceled |
| 223 | Task & is locked |
| 224 | Task & is not active |
| 225 | Task & can be started |
| 226 | Predecessor &1 of task &2 has status '&3'; task &4 cannot be executed |
| 227 | Predecessor & of task & has status '&'; status cannot be changed |
| 228 | |
| 229 | |
| 230 | Flow definition & successfully scheduled |
| 231 | |
| 232 | Organizational type & is not yet implemented in BADI & |
| 233 | |
| 234 | Date & adjusted to & due to special period |
| 235 | Period & is not a special period. Enter a special period |
| 236 | Period & is a special period. Do not specify a special period |
| 237 | For special closing, you must enter a special period |
| 238 | A special period must be entered for special closing |
| 239 | Enter fiscal year variant |
| 240 | Fiscal year variant (&) or date (&) is incorrect |
| 241 | Error in remote scheduler |
| 242 | No remote task with text &2 found for task list &1 |
| 243 | No task list found for remote task &1 |
| 244 | |
| 245 | |
| 246 | |
| 247 | |
| 248 | |
| 249 | |
| 250 | Time zone was saved successfully as a user default |
| 251 | Error occurred when saving user defaults |
| 293 | Error in generating tech. variant for task &1 |
| 294 | Factory calendar & not found |
| 295 | Select a factory calendar |
| 296 | Scheduling of task & deleted by user & |
| 297 | Scheduling of task & deleted by user & |
| 298 | Active task & canceled by user & |
| 299 | Task & is not active. It consequently cannot be scheduled |
| 300 | Task & scheduled successfully |
| 301 | Scheduling for task & in & contains an error. Error number & |
| 302 | Scheduling for task & in & contains an error. Error number & |
| 303 | Task & not found |
| 304 | Task & cannot be scheduled |
| 305 | Scheduling for task & in & contains an error; error number & |
| 306 | Program &1 not found |
| 307 | Variant &1 for program &2 not found |
| 308 | Process definition & not found |
| 309 | Start date/time &1 &2 occurs in the past |
| 310 | Scheduling for task &1 contains error;Please check Job Owner and Job Name |
| 311 | Task &1 cannot be scheduled due to task type |
| 312 | Posting period & and fiscal year & determined from key date & |
| 313 | Key date set to & |
| 314 | Specify the fiscal year variant |
| 315 | Fiscal year variant & does not exist |
| 316 | Key date for a task list must fall after 01/01/1900 |
| 317 | Template name must not be empty |
| 318 | Task list name must not be empty |
| 319 | Error when creating Schedule Manager task list |
| 320 | Mandatory parameter & missing |
| 321 | Action canceled by user |
| 322 | Task list status Active cannot be set manually |
| 323 | Test run & completed. Scheduling in update run not possible |
| 324 | Name of task list is blank |
| 325 | Errors while scheduling remote task &1 |
| 326 | Scheduling of task '&' cannot be deleted because of the status |
| 327 | Task & cannot be scheduled due to task type |
| 328 | Task & cannot be deleted due to task status |
| 329 | Task & cannot be edited due to task status |
| 330 | Task (folder) cannot be cut due to task status |
| 331 | Task & cannot be renamed due to task status |
| 332 | Variant cannot be changed due to task status |
| 333 | Critical path cannot be activated due to task status |
| 334 | Critical path cannot be deactivated due to task status |
| 335 | Automatic time determination is not possible |
| 336 | Destination &1 does not exist |
| 337 | Isolation group &1 does not exist |
| 338 | Destination does not exist |
| 339 | Task '&1' cannot be locked due to task status |
| 340 | Factory calendar is not considered if the Key Date is changed |
| 341 | Task cannot be deactivated due to task status |
| 342 | |
| 343 | |
| 344 | |
| 345 | |
| 346 | |
| 347 | Name of a template delivered by SAP must start with a number |
| 348 | Name of a customer-specific template cannot start with a number |
| 349 | |
| 355 | There are no change documents |
| 356 | |
| 357 | Error occurred in function module 'JOB_OPEN'; SY-SUBRC: &1 |
| 358 | Error occurred in function module 'JOB_SUBMIT'; SY-SUBRC: &1 |
| 359 | Error occurred in function module 'JOB_CLOSE'; SY-SUBRC: &1 |
| 361 | |
| 362 | |
| 363 | |
| 364 | |
| 365 | |
| 366 | |
| 367 | |
| 368 | |
| 369 | |
| 370 | Changes not found in SAP_ABA; see SAP Note 1516790 |
| 371 | Conversion has already been performed |
| 372 | |
| 373 | Conversion was performed successfully |
| 374 | No status history exists |
| 375 | Status &1 for task &2 cannot be set manually |
| 376 | Cannot change status of task &1; task is locked |
| 399 | Test run: & is not active; scheduling in update run is not possible |
| 400 | |
| 401 | System setting does not allow any changes |
| 402 | Template & successfully included in request & under task & |
| 403 | Transport of template & canceled by user |
| 421 | Completed tasks cannot be edited |
| 422 | No objects for editing found |
| 423 | Cannot schedule tasks due to task list status |
| 424 | Cannot process tasks due to task list status |
| 426 | |
| 427 | |
| 428 | |
| 429 | |
| 433 | Not all tasks could be locked |
| 434 | Not all tasks could be locked; try again |
| 435 | |
| 436 | |
| 437 | |
| 438 | Not possible to delete folder of type "Client" |
| 439 | Not possible to copy folders with the type "Client" |
| 440 | For new tasklist only status "Not released" or "Released" is allowed |
| 441 | |
| 442 | |
| 443 | |
| 444 | |
| 445 | Log content cannot be displayed. |
| 446 | |
| 447 | |
| 448 | |
| 449 | |
| 450 | |
| 451 | |
| 452 | |
| 453 | |
| 454 | |
| 455 | Duration could not be determined. Error number & |
| 456 | End time could not be determined |
| 457 | End time could not be determined |
| 459 | A task of the same name already exists in the target folder |
| 460 | Task &: User & does not exist. & entered as user |
| 461 | Task &: Person responsible & does not exist. & entered |
| 462 | Task &: Program & not found. Program name being deleted |
| 463 | Task &: Task list "Program" but no program name available |
| 464 | Start of consistency check during an import |
| 465 | End of consistency check during an import |
| 466 | Scheduling was terminated |
| 467 | |
| 468 | |
| 469 | |
| 470 | Selection was saved |
| 471 | Selection was deleted |
| 472 | Template/task list has been set as the default template/task list |
| 473 | Select a template or task list |
| 474 | Default template/task list/task group cleared |
| 475 | No default setting exists |
| 476 | |
| 477 | |
| 478 | |
| 479 | |
| 480 | Gap between two task lists must be between 1 and 365 days |
| 481 | |
| 482 | The offset is smaller than -31. Valid area: -31 - 999 |
| 483 | The offset is larger than 999. Valid area: -31 - 999 |
| 484 | Offset is invalid; valid range from -31 to 999 |
| 500 | No program name specified |
| 501 | Enter a name |
| 502 | & not found as user name in current client & |
| 503 | Specify a start time |
| 504 | Specify type of day (such as calendar day or working day) |
| 505 | Specify a valid offset |
| 506 | |
| 507 | Transaction & does not exist |
| 508 | You have chosen a menu instead of a transaction |
| 509 | Enter a transaction name |
| 510 | No processing type selected |
| 511 | Enter a program name |
| 512 | Enter the name of a flow definition |
| 513 | Enter a name |
| 514 | Report & does not exist |
| 515 | No variant specified |
| 516 | No flow definition specified |
| 517 | No remote task specified |
| 518 | Variant name & may not start with a space |
| 519 | Variant name & may not contain any double spaces |
| 520 | Flow definition & already exists |
| 521 | Flow definition & not found |
| 522 | Program &1 is not connected to the Financial Closing cockpit |
| 523 | Transaction & is not yet connected to the Schedule Manager |
| 524 | Enter a job definition |
| 525 | Job definition & is not defined in BAE |
| 526 | Program &1 cannot be executed |
| 527 | The program & is not executable |
| 528 | Enter task URL |
| 550 | Object is locked by another user |
| 551 | |
| 552 | |
| 553 | |
| 554 | Make entries in all required fields |
| 555 | Organizational object & (&) already exists |
| 556 | First specify the table (on the left) |
| 557 | Table & does not exist |
| 558 | Field & does not exist in table & |
| 559 | Specify table name for field & |
| 560 | You do not have change authorization (&) for this object |
| 561 | General Customizing settings are locked by user & |
| 562 | General Customizing settings have been saved successfully |
| 563 | You do not have authorization to change the general Customizing settings |
| 564 | FIORI Job Template &1 not found |
| 565 | FIORI Job Template cannot be empty |
| 571 | Processing of the task list & & was started. |
| 572 | Processing of the task list & & was ended. |
| 599 | Enter a template |
| 600 | |
| 601 | Specify a task list |
| 602 | Specify a fiscal year variant |
| 603 | Specify an organizational hierarchy |
| 604 | Specify a valid RFC connection |
| 605 | RFC error. Return code = & |
| 606 | Table & does not exist |
| 607 | Document cannot be modified |
| 608 | Document type is not supported |
| 609 | Select document |
| 610 | Select one document only |
| 611 | Document of this type cannot be modified |
| 612 | Document can be modified only in the task group &1 |
| 613 | Document of this type cannot be exported |
| 614 | Document of this type cannot be imported |
| 615 | Document can be deleted only in the task group |
| 701 | A system error has occurred |
| 710 | Company code variant & not found |
| 711 | Specify a valid fiscal year |
| 712 | Enter the period |
| 713 | Select a valid period |
| 714 | Enter a valid account type |
| 715 | Account type & not found |
| 716 | Table & not in DDIC |
| 717 | You have no authorization to edit cross-client tables |
| 718 | You have no authorization to edit the requested data |
| 719 | You have no authorization to maintain lines for the data |
| 720 | Transaction successfully completed |
| 721 | Error during UPDATE in table &1. Key: &2 &3 &4 |
| 722 | No changes made |
| 723 | Specify a complete interval |
| 724 | FROM period larger than TO period |
| 725 | Database update failed |
| 726 | Error during INSERT in table &1. Key: &2 &3 &4 |
| 727 | Start of period (period 1) was set to &1 &2 |
| 728 | Start of period (period 2) was set to &1 &2 |
| 729 | End of period (period 1) was set to &1 &2 |
| 730 | End of period (period 2) was set to &1 &2 |
| 731 | From period &1 (time frame 1) is invalid |
| 732 | To period &1 (time frame 1) is invalid |
| 733 | From period &1 (time frame 2) is invalid |
| 734 | To period &1 (time frame 2) is invalid |
| 735 | No entry was found in table &1 |
| 736 | Fiscal year variant used: &1 |
| 737 | From-period &1 (time frame &2) is invalid |
| 738 | To-period &1 (time frame &2) is invalid |
| 739 | Beginning of period (interval &3) converted to &1 &2 |
| 740 | End of period (interval &3) converted to &1 &2 |
| 741 | From/To Account fields have been initialized for account type '+' |
| 742 | From-Year is greater than To-Year |
| 743 | Predecessor &1 cannot be created |
| 744 | Predecessor &1 was created successfully |
| 745 | Offset of predecessor & must be smaller than offset of task & |
| 746 | Offset of successor & must be greater than offset of task & |
| 747 | Only select one task or one folder |
| 748 | Task/folder is not found in any org unit |
| 749 | Cannot find corresponding organizational units in destination |
| 750 | Organizational units were updated successfully |
| 751 | Offsets of tasks &1 and &2 can't be checked. |
| 752 | &1 new organizational units imported from remote system &2 |
| 753 | Organization type &1 is invalid |
| 754 | Organizational unit &1 is invalid |
| 755 | No folders are available for selected Task list |
| 756 | Dependency for task & cannot be created due to task status. |
| 777 | &1 new organizational units imported |
| 799 | Background jobs are locked |
| 801 | Document already exists |
| 802 | Document does not exist |
| 803 | First close all other documents |
| 804 | Document deleted |
| 805 | |
| 806 | |
| 807 | Texts changed successfully |
| 808 | Unknown error while opening document type '&' |
| 809 | Document type '&' not known |
| 811 | Note already exists |
| 812 | Enter a valid value |
| 813 | Scheduling could not be deleted for task & |
| 814 | No detail list available |
| 815 | No basic list available |
| 816 | No job log exists |
| 817 | No messages exist in application log |
| 818 | Table &1 does not exist in the system connected via RFC |