GHO_ALLOC_UI - Message Class for UI for Allocation
The following messages are stored in message class GHO_ALLOC_UI: Message Class for UI for Allocation.
It is part of development package EA_GHO_ALLOC_MDP in software component IS-OIL-UOM-ALN. This development package consists of objects that can be grouped under "Allocation: MDP Layer".
It is part of development package EA_GHO_ALLOC_MDP in software component IS-OIL-UOM-ALN. This development package consists of objects that can be grouped under "Allocation: MDP Layer".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Allocation rules saved successfully |
| 001 | Network object header rule already exists |
| 002 | Enter all mandatory fields |
| 003 | Duplicate rules entered; one of the entry is removed |
| 004 | Selection criteria is applied |
| 005 | Your selection is cleared |
| 006 | "No. of tests" must be blank or equal to 1 for selected "Formation TCM" |
| 007 | "No. of tests" must be greater than 1 for selected "Formation TCM" |
| 008 | Formation TCM method cannot be blank for an override rule record |
| 009 | Production network cannot be blank |
| 010 | Network objects do not exist for the selection criteria |
| 011 | Enter all allocation submission criteria |
| 012 | Theoretical rule saved successfully |
| 013 | Data saved successfully |
| 014 | Date/time cannot be greater than &/& |
| 015 | 'Medium' is a mandatory field |
| 016 | 'Frequency' is a mandatory field |
| 017 | 'From Date' is a mandatory field |
| 018 | Enter "Formation TCM" |
| 019 | 'Sequence' is a mandatory field |
| 020 | 'Allocation Material' is a mandatory field |
| 021 | 'Quantity Type' is a mandatory field |
| 022 | 'To Date' is a mandatory field |
| 023 | 'Unit of Measure' is a mandatory field |
| 024 | 'Quantity' is a mandatory field |
| 025 | 'Allocation Type' is a mandatory field |
| 026 | 'Network Object' is a mandatory field |
| 027 | 'Network Object Type' is a mandatory field |
| 028 | 'Material' is a mandatory field |
| 029 | 'Date/time' is a mandatory field |
| 030 | 'Production Network' is a mandatory field |
| 031 | 'UOM Group' is a mandatory field |
| 032 | 'Conversion Group' is a mandatory field |
| 033 | Function is not available |
| 034 | Select a valid allocation material |
| 035 | 'Dimension' is a mandatory field |
| 036 | 'UoM' is a mandatory field |
| 037 | Select a valid UOM |
| 038 | UOM Rule item data already exists |
| 039 | 'Production Date(From)' is a mandatory field |
| 040 | Downstream split rule already exists |
| 041 | Percentage must aggregate to 100 |
| 042 | Downstream N/W object is added for medium &1 frequency &2 from date &3 |
| 043 | Node rule does not exists for node &1 |
| 044 | Downstream split rule already exists |
| 045 | Quantity type &1 should be first in sequence; hence sequence is changed |
| 046 | Downstream N/W object is deleted for medium &1 frequency &2 from date &3 |
| 047 | Production network has no network objects assigned |
| 048 | Plan information has not been maintained at Work center |
| 049 | &1 |
| 050 | UOM rule is not maintained in the allocation rules |
| 051 | Network header data already exists |
| 052 | Network item data already exists |
| 053 | Network header data for From Date &1 is changed |
| 054 | Node header data already exists |
| 055 | Network object item rule already exists |
| 056 | Node header data for From Date &1 is changed |
| 057 | Unique Network ID not generated; check data and save |
| 058 | Production network & does not exist |
| 059 | Sequence number entered is already used; select another number |
| 060 | Enter all mandatory fields |
| 061 | For Formation TCM 'average','No. of tests' input is mandatory |
| 062 | Input for 'No. of tests' is valid only when Formation TCM is 'average' |
| 063 | Production network is mandatory |
| 064 | Date/Time is mandatory |
| 065 | Network object is mandatory |
| 066 | Material is mandatory |
| 067 | Quantity Type is mandatory |
| 068 | Allocation Type is mandatory |
| 069 | Frequency is mandatory |
| 070 | QCI conversion failed |
| 071 | Select a valid header line |
| 072 | Tolerence value can only be between 0 to 100 |
| 073 | Enter a valid network |
| 074 | Enter a valid node |
| 075 | Timestamp creation failed |
| 076 | Allocation rule validity period overlaps |
| 077 | Allocation rule; Valid To date must be greater/equal to Valid From date |
| 078 | Validity date &1, time &2 must be within the allocation rule date range |
| 079 | Allocation rule; quantity type must not be entered for well completions |
| 080 | Network object &1 does not exist for network &2 |
| 081 | Node &1 does not exist for network &2 |
| 082 | Measuring point does not exist for network object & |
| 083 | Theoretical overrides saved successfully |
| 084 | Measurement configuration setup for node does not exist |
| 085 | Measurement rule item already exists |
| 086 | Enter at least one measurement rule item |
| 087 | "GLG-No. of tests" is mandatory when "GLG TCM" is average |
| 088 | "GLG-No. of tests" is valid only when "GLG TCM" is average |
| 089 | "GLG-No. of test" must be blank or equal to 1 for a selected "GLG TCM" |
| 090 | "GLG-No. of tests" must be greater than 1 for a selected "GLG TCM" |
| 091 | End of Test Date/Time is earlier than Start of Test Date/Time |
| 092 | Enter measurement reading value |
| 093 | Load oil transferred successfully |
| 094 | Measurement reading with identical timestamp exists |
| 095 | Measurement readings for actual quantities cannot be in future |
| 096 | Record for load oil recieved cannot be maintained |
| 097 | Enter Well |
| 098 | Enter well test start date |
| 099 | Enter well test end date |
| 100 | Enter well test value |
| 101 | Unable to update inspection lot values |
| 102 | Unable to update inspection lot readings |
| 103 | Well test data cannot be maintained for future date |
| 104 | Enter MRH item details for measurement point & |
| 105 | Selected rule cannot be deleted as Network Object rule exists |
| 106 | Selected theoretical data cannot be deleted as allocation results exist |
| 107 | Selected rule cannot be deleted as well/well completion rule exists |
| 108 | Selected rule cannot be deleted as allocation results exist |
| 109 | Selected UOM rule cannot be deleted as theoretical override data exists |
| 110 | Selected UOM rule cannot be deleted as measurement data exists |
| 111 | Selected node rule cannot be deleted as allocation results exist |
| 112 | Selected node rule cannot be deleted as theoretical override data exists |
| 113 | Selected node rule cannot be deleted as measurement data exists |
| 114 | Enter well test end time |
| 115 | There are more than one well completion |
| 116 | Selected measurement readings deleted successfully |
| 117 | Select the measurement record to delete |
| 118 | & is a mandatory field |
| 119 | Well test not allowed for non commingled wells |
| 120 | Dependent Material is mandatory for Dependent Quantity |
| 121 | Dependent Quantity is mandatory for Dependent Material |
| 122 | Duplicate well test entries for network object & |
| 123 | Allocation material &1 does not exist |
| 124 | Reproduced material entry already maintained for the current selection |
| 125 | Data reset; Prior Period Notification cancelled |
| 126 | Quantity and ownership allocation cannot be submitted; check all statuses |
| 127 | Quantity allocation cannot be submitted; check all statuses |
| 128 | Ownership allocation cannot be submitted; check all statuses |
| 129 | Ownership allocation can only be submitted for actual quantity allocation |
| 130 | Allocation submitted successfully |
| 131 | Measurement retrieval hierarchy run submitted successfully |
| 132 | Medium is not set for network &1 |
| 133 | Frequecy is not set for network &1 |
| 134 | Network rule creation failed |
| 135 | Node rule creation failed |
| 136 | Well completion override rule creation failed |
| 137 | Unit of Measure rule creation failed |
| 138 | Well completion data could not be created |
| 139 | Node data capture failed |
| 140 | Total Composition percentage value can only be 100 |
| 141 | Master UOM already maintained |
| 142 | Work center not maintained for the network object & |
| 143 | Maintenance plant not maintained for network object & |
| 144 | Maintenance Planning plant not maintained for network object & |
| 145 | Master data for tasklist settings not maintained for network object & |
| 146 | Allocation basis network cannot be blank |
| 147 | Valid From/To Date is not within the specified filter date range |
| 148 | Node is maintained as termination point in another network |
| 149 | Node is not set as termination point in another network |
| 150 | Node is set as chained in another network |
| 151 | Business function Operation Performance Mgmt (OIL_OPM_UPST) is not active |
| 152 | User &2 does not have authorization to display network &1 |
| 153 | User &2 does not have authorization to modify network &1 |
| 154 | 'Measurement Point' is a mandatory field |
| 155 | Start Date/Time cannot be same as End Date/Time |
| 156 | Tasklist has not been maintained for the selected Network Object |
| 157 | Tasklist assigned to network object is not valid for specified date range |
| 158 | Chemical analysis level is not maintained at production network |
| 159 | Node cannot be set as termination point and chained |
| 160 | Duplicate measurements entered; one of the entry is deleted |
| 161 | Analysis basis "volume" is not allowed for analysis type "gas" |
| 162 | Tasklist is not maintained for the selected chemical analysis level |
| 163 | Chemical analysis level is not maintained in customizing |
| 164 | Quantity type &1 does not exist |
| 165 | Valid Start Time cannot be 24:00:00 |
| 166 | Valid End Time cannot be 24:00:00 |
| 167 | Chemical basis level is not maintained at production network |
| 168 | Timestamp for To Date conversion failed |
| 169 | Valid To Date must be greater than or equal to Valid From Date |
| 170 | Maintain quantity for all UOMs |
| 171 | Valid Start/EndTime cannot be 00:00:00; it is set by default to 00:00:01 |
| 172 | Cost Center data not maintained for network object & |
| 173 | Inspection Lot Creation not enabled for ordert type & |
| 174 | Enter Valid From Date within the simulation date range |
| 175 | Maintenance order type not defined for network object |
| 176 | Inclusion of well test record is not allowed after exclusion |
| 177 | Entries for load oil sales or load oil received cannot be deleted |
| 178 | Allocation results not found; run quantity allocation |
| 179 | 'Well Head Pressure' is a mandatory field |
| 180 | 'Well Head Pressure UOM' is a mandatory field |
| 181 | 'Max Flow Rate' is a mandatory field |
| 182 | 'Max Flow Rate UOM' is a mandatory field |
| 183 | 'Decay Constant' is a mandatory field |
| 184 | PQ curve test is not allowed for non commingled well |
| 185 | PQ curve test is not allowed for non commingled well completion |
| 186 | Reproduced material percent must be less than 100 |
| 187 | Multiple 'Max Flow Rate' UOMs is not allowed for single PQ curve test |
| 188 | Multiple Well Head Pressure UOMs is not allowed for single PQ curve test |
| 189 | Duplicate records are not allowed |
| 190 | Select a valid measurement point |
| 191 | Source and destination networks cannot be the same |
| 192 | Node is not allowed for chaining |
| 193 | Allocation run unsuccessful; check log in the result query |
| 194 | Enter end of test date |
| 195 | End of test date cannot be before start of test date |
| 196 | Start time cannot be equal to end time if start date is equal to end date |
| 197 | End time cannot be before start time if start date is equal to end date |
| 198 | Select a row |
| 199 | User &1 does not have authority to modify rules for &2 |
| 200 | User &1 does not have authority to modify actual quantity for &2 |
| 201 | User &1 does not have authority to modify planned quantity for &2 |
| 202 | User &1 does not have authority to modify mrh rules for &2 |
| 203 | User &1 does not have authority to modify theoritical override for &2 |
| 204 | Enter notification number |
| 205 | Notification already created for given time and date |
| 206 | User &2 does not have authority to perform this activity for &1 |
| 207 | &2 is locked by user &1 |
| 208 | Objects without authority to modify have been removed |
| 209 | Allocation run completed with warnings; check log in the result query |
| 210 | Production network is locked |
| 211 | Network object is locked |
| 212 | Select only operator 'IS' for any selection criteria |
| 213 | Select a valid source type |
| 214 | Enter a valid oil field |
| 215 | Cannot maintain measurements at cluster level |
| 216 | Enter different dependent medium for medium &1 |
| 217 | Dependent Medium not maintained at Allocation Rules |
| 218 | Measurement Type is a mandatory field |
| 219 | Priority is a mandatory field |
| 220 | Measurement Category is a mandatory field |
| 221 | Duplicate Priority is not allowed |
| 222 | Medium is not allowed for Well Tests |
| 223 | Frequency is not allowed for Well Tests |
| 224 | 'Use Allocated Values' cannot be used for quantity type &1 |
| 225 | Enter Measurement Priority item for object &1 |
| 226 | Oil is a mandatory field |
| 227 | Oil field &1 is not maintained for production network |
| 228 | Duplicate Measurement Categories are not allowed |
| 229 | Characteristics &1 is not maintained for &2 |
| 230 | QCI Parameter is not maintained for measurement &1 |
| 231 | Zonal Contribution is missing at well; maintain at &1 |
| 232 | Theoretical overrides are not allowed for well with TCM as PQ Curve |
| 233 | Theorectical overr will not exist for &1 to & 2; do you want to continue? |
| 234 | UOM rules are not maintained at the network |
| 235 | Theoretical override is not allowed for commingled well completion |
| 236 | Quantity &1 &2 is invalid |
| 237 | Zonal Contribution is missing for &1 . Press OK to maintain |
| 238 | Theoretical override not allowed for non-commingled well &1 |
| 239 | Theoretical override overlaps with existing rate. Press OK to override |
| 240 | Theoretical override exists for given date range. Press OK to update |
| 241 | QCI conversion cannot be performed. Check task list |
| 242 | Network Object & does not exist for the entered date range |
| 243 | QCI Conver failed |
| 244 | Well Completion test not allowed for commingled well completions |
| 245 | Any changes to this record will affect an existing business result. |
| 246 | Record is eligible for Audit Trail |
| 247 | PPN approval pending for &1 |
| 248 | PPN request was rejected! |
| 249 | PPN request submitted for approval |
| 250 | Please Enter Valid Audit Reason Code |
| 251 | &1 should greater than Zero |
| 252 | &1 should not be blnak |
| 253 | Inspection point not created |
| 254 | Any changes to this record will affect an existing business result. |
| 255 | Sample already exist |
| 256 | PPN approval pending |
| 257 | No records found based on your selection Criteria |
| 258 | Select only one measurement category as default |
| 259 | Network Obj rules item missing for Obj &1 Med &2 Freq &3 Date &4 |
| 260 | Network rules item missing for Obj &1 Med &2 Freq &3 Date &4 |
| 261 | UOM Group &1 does not exist |
| 262 | Conversion Group &1 does not exist |
| 263 | Insertion not allowed for this rule, Measurement exist |
| 264 | Insertion not allowed for this rule, Well/Well completion test exist |
| 265 | For Formula either 'Custom Calc. ID' or 'Field' is mandatory |
| 266 | Enter 'Valid From Date' within Network links validity date range |
| 267 | Allocation material &1 is not valid for Medium &2 |
| 268 | Assign Formula to Node &1, Medium &2, Freq &3 and Date &4 |
| 269 | Change in Effective From Date not allowed |
| 270 | Results not avlbl for WC &1 in depended network for dep mat &2 |
| 271 | Allocated quantity for depended medium &1 is either '0' or not captured. |
| 272 | Results not avlbl for WC &1 in network &4 for dep mat &2 and qty typ &3 |
| 273 | Valid From Date/Time(&1,&2) of medium(&3) is not aligned for frequency &4 |
| 274 | Validity dates for all mediums must be aligned |
| 276 | Sum of ZCF for well &1 of network &2 and medium &3 should be 100% |
| 277 | Functional location not found for originating MP:& |