GR - Report Writer
The following messages are stored in message class GR: Report Writer.
It is part of development package GRWT in software component FI-SL-IS. This development package consists of objects that can be grouped under "Report Painter / Report Writer".
It is part of development package GRWT in software component FI-SL-IS. This development package consists of objects that can be grouped under "Report Painter / Report Writer".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Time measurement: in hh:mm:ss &, in micro sec & |
| 002 | *-------- Report Writer messages ---------------------------------------* |
| 003 | An appropriate object was not found |
| 004 | No object was selected |
| 005 | Group & for object & not in table TBRG |
| 010 | System error: Internal error when blocking an object |
| 011 | Report & is already being edited by user & |
| 012 | Library & is already being edited by user & |
| 013 | Report group & is already being edited by user & |
| 014 | Parallel report & is already being edited by user & |
| 015 | Standard layout & is already being edited by user & |
| 016 | & & & & |
| 017 | Key figure &1 is already being edited by user &2 |
| 019 | You cannot run the program in client &1 |
| 020 | Report & of library & is not used yet |
| 021 | Parallel report & of library & is not used yet |
| 022 | Standard layout & is not used yet |
| 023 | Library & is not used yet |
| 024 | Report group & has been generated |
| 025 | Report group & could not be generated |
| 026 | Report group & has been generated (with warnings) |
| 027 | SAPMGRW1 has been started directly |
| 028 | SAPMGRW2 has been started directly |
| 029 | Layout control could not be generated |
| 030 | Name range is reserved for Report Writer |
| 031 | Language vector not found |
| 032 | Report group & does not contain any reports |
| 033 | The languages & have been set |
| 034 | & programs have been deleted |
| 035 | No object was selected |
| 036 | & objects have been copied from client & |
| 037 | Sets already exist for this prefix. |
| 038 | Enter an export file |
| 039 | Enter a valid amount |
| 040 | Make sure you selected cross-page |
| 041 | The selected area is not contained in the current page |
| 042 | The receiver report is called up with the general selection conditions |
| 043 | Cell is marked |
| 044 | The function can only be performed for row blocks with the type 'set' |
| 045 | The row block &1 is considered as a block for non-assigned values |
| 046 | Row block &1 is not considered as a block for non-assigned values |
| 047 | Row block &1 cannot be considered as a block for non-assigned values |
| 048 | Row block &1 is assigned to the block for non-assigned values &2 |
| 049 | It is not possible to mark rows contained in different sections |
| 050 | You cannot mark more than one row in a section that has been sorted. |
| 051 | Processing interrupted in diagnosis session |
| 052 | Report-report interface not active |
| 053 | Check the selection conditions |
| 054 | Report group & imported from client 000 |
| 055 | Processing was terminated |
| 056 | Internal error: Not possible to enter new key figure &1 |
| 057 | Internal error: Not possible to enter new characteristic &1. |
| 058 | Internal error: Not possible to enter new key figure &1 |
| 059 | The receiver report cannot be called up |
| 060 | Characteristic &1 to be assigned to general selections |
| 061 | Check the data source |
| 062 | Set name &1 not unique (table &2, characteristic &3) |
| 063 | Report group &1 is being regenerated (status &2) |
| 100 | *-------- Variation report ---------------------------------------------* |
| 101 | No valid value combination found |
| 102 | Higher-level characteristic & for characteristic & not defined uniquely |
| 103 | Only individual values can be entered for characteristic & |
| 104 | No entries made for characteristic &. |
| 105 | Invalid set & / characteristic & for input field & |
| 106 | Invalid indicators: no hierarchy explosion for fixed set |
| 107 | Operator & in value set entry is not supported |
| 108 | Only enter either set or values for set selection |
| 109 | Variation of the selection is not supported for report group & |
| 110 | The report will be output on output mediem &1 |
| 111 | The report will be output in format &1 |
| 112 | Report section hierarchically sorted according to column &1 |
| 113 | Report section sorted according to column &1 to summation level &2 |
| 114 | *** Report output (&) *** |
| 115 | & rows hidden manually |
| 116 | Some changes only effective after regeneration |
| 117 | Text "&1" not found |
| 118 | Text "&1" found |
| 119 | Level 1 - Presupposes single values |
| 145 | Internal error during currency translation |
| 146 | The first page is already being displayed |
| 147 | The last page is already being displayed |
| 148 | The first section is already being displayed |
| 149 | The last section is already being displayed |
| 150 | *------------Extract administration-------------------------------------* |
| 151 | GRIX test mode: internal error. |
| 152 | Passwords do not match. |
| 153 | Incorrect password. |
| 154 | Validity date can only be changed for all extracts of a variation run |
| 155 | Place your cursor on a valid column. |
| 156 | Enter a value other than 0. |
| 157 | Enter a valid date |
| 158 | All extracts will be printed with active variation |
| 159 | Select one of the extracts listed |
| 160 | Unpermitted interval for report groups |
| 161 | Only a single extract can be selected for display |
| 162 | Specified printer does not exist |
| 163 | At least one extract must be selected to change validity |
| 164 | Characteristic not permitted |
| 165 | First enter a characteristic |
| 166 | Enter value or group |
| 167 | Data source changed in reselection setting |
| 168 | No new extract will be created |
| 169 | No extract was found for the selection criteria entered |
| 170 | Choose an extract |
| 171 | Only one index entry is made for the extract |
| 172 | Not all the selected entries can be deleted |
| 173 | Not all selected entries can be changed |
| 174 | Password could not be deleted for all the selected extracts |
| 175 | Password could not be changed for all the selected extracts |
| 176 | Password for extract "&" could not be changed |
| 177 | Password for extract "&" was deleted |
| 178 | Password for extract "&" was changed |
| 179 | Invalid entry for &1 |
| 180 | Single value &1 for characteristic &2 does not exist |
| 181 | The extract sent to you has been deleted |
| 182 | You do not have the authorization to create extracts |
| 183 | You do not have the authorization to delete/change this extract |
| 184 | A matching extract was not found, so a new selection was made |
| 185 | The newest extract was selected |
| 186 | Not all the selected extracts could be regenerated |
| 187 | Selected extracts have been regenerated |
| 188 | Extract is not allowed |
| 189 | Extract could not be generated |
| 190 | No translation rate exists from &1 to &2 for the date &3 and exch.type &4 |
| 191 | Target currency or exch. rate type missing or no key figure was selected |
| 192 | Structural changes were detected |
| 200 | *-------- Internal error messages --------------------------------------* |
| 201 | Internal error: Incorrect report in PROCESS_OUT2_ENTRY |
| 202 | Internal error: Incorrect report in APPEND-MATRIX |
| 203 | Internal error: Incorrect index in ADD-VALUE-& |
| 204 | Internal error: Incorrect index in GET-VALUE-& |
| 205 | Internal error: Entry in COLUMNS does not exist (MERGE-RC) |
| 206 | Internal error: Operand is not in COLUMNS (JxxxxmmF) |
| 207 | Internal error: Total is not in TOTALS (JxxxxmmF) |
| 208 | Internal error: Incorrect status in E41_GET_NEXT_ENTRY |
| 209 | Internal error: Currency or quantity field missing in additional table |
| 210 | Internal error: Invalid value variable. |
| 211 | Internal error: Invalid offset in APPEND-C. |
| 212 | Internal error: Invalid type in APPEND-C. |
| 213 | Internal error: Class & not available (field &). |
| 214 | Internal error: Program & , include & , form & . |
| 215 | Internal error: More than & GREP blocks were requested |
| 216 | Internal error: Syntax error in program & (return code &) |
| 217 | Internal error: no data found in the memory |
| 218 | Internal error: data could not be written to the memory |
| 219 | Internal error in SAPLGRWI: Invalid index |
| 220 | Internal error during conversion of a Report Painter report. |
| 221 | Internal error: Field &1-&2 does not exist |
| 222 | Internal error: Invalid row formula |
| 223 | Internal error: Invalid key figure block formula |
| 224 | Report Painter: Internal error when converting a report |
| 225 | Report Painter: Error when generating a report. |
| 226 | Report Painter: Library & does not exist |
| 227 | Report Painter: Internal error, variable & does not exist |
| 228 | Internal error: Error contained in field value in dypro SAPLGRWT 1100 |
| 229 | Key figure block &1, row &2, column &3: Formula cannot be converted |
| 230 | Internal error: call obsolete |
| 231 | Internal error: Report Writer control table & is inconsistent |
| 232 | Internal error: Set & does not exist. |
| 233 | Internal error: Table field for variable & cannot be determined |
| 234 | Internal error: Inconsistency in section & |
| 235 | Internal error: RC = 1, routine &2, keywords &3 &4 |
| 246 | The characteristic &1 cannot be deactivated. |
| 247 | The key figure &1 cannot be deactivated. |
| 248 | The characteristic &2 was automatically activated. |
| 249 | The key figure &2 was automatically activated. |
| 250 | No key figures selected in library & |
| 251 | No documentation stored for key figure & |
| 252 | Report contains more than &1 columns |
| 253 | Report group &1 is currently already generated |
| 254 | The selected data was saved |
| 255 | Floating point number cannot be converted |
| 256 | The selected data could not be saved |
| 300 | *-------- Transactions -------------------------------------------------* |
| 301 | The key figure block formula contains a syntactic error |
| 302 | Report & already exists in library & |
| 303 | Enter report and library |
| 304 | Report & does not exist in library &. |
| 305 | Set ID cannot be cancelled |
| 306 | Assign a report first |
| 307 | Set & does not contain any entries |
| 308 | Set & does not exist |
| 309 | Row & does not exist |
| 310 | The report can only be maintained in the logon language |
| 311 | Standard layout & has been assigned to the report |
| 312 | Invalid report name |
| 313 | Enter all length and width values |
| 314 | Internal error when blocking the report |
| 316 | Column & does not exist |
| 317 | Enter the window value for report & (entry &) |
| 318 | Report & (entry &) is too large for the logical page |
| 319 | Enter a numeric value |
| 320 | You have not yet defined a key figure block |
| 321 | No symbolic names exist in the set |
| 322 | Enter library and parallel report |
| 323 | Parallel report & & already exists |
| 324 | Parallel report & & does not exist |
| 325 | The parallel report is being edited by another user |
| 326 | Enter a value not equal to zero |
| 327 | Generate report group & first |
| 328 | Report & (entry &) is entered repeatedly |
| 329 | You are changing a parallel report of user & |
| 330 | No cells exist in the column set |
| 331 | Library default set & has been assigned characteristic & |
| 332 | Library default set & does not exist |
| 333 | Position cursor on the entry to be deleted |
| 334 | No row or column coordinates selected |
| 335 | The specified key figure block does not exist |
| 336 | Library & already exists |
| 337 | Library & does not exist. |
| 338 | The block is already used in the row definition |
| 339 | Enter a library name |
| 340 | Specify either table or library to be copied |
| 341 | Do not create any objects with leading numbers |
| 342 | The report to be copied does not exist |
| 343 | Do not change any objects with leading zeros |
| 344 | Do not delete any objects with leading zeros |
| 345 | The library you want to copy uses table & |
| 346 | Specify valid table name |
| 347 | Enter a valid status |
| 348 | & is not a single, basic or key figure set |
| 349 | Enter a to-value that is greater than the from-value |
| 350 | Choose at least one set type |
| 351 | Highlight level was not specified |
| 352 | Single values only possible with valid variation range |
| 353 | Report & is used repeatedly |
| 354 | Parallel report & is used repeatedly |
| 355 | Standard layout & is used in report & & |
| 356 | The first key figure block is already displayed |
| 357 | The last key figure block is already displayed |
| 358 | Last row is displayed |
| 359 | Last column is displayed |
| 360 | Enter language and standard layout |
| 361 | Invalid input combination field / variable / value |
| 362 | Where possible, limit input combination |
| 363 | First row is displayed |
| 364 | First column is displayed |
| 365 | Define cell completely |
| 366 | Report &1: Cell &2 cannot be calculated |
| 367 | Report &1, key figure block &2: Formula (&3,&4) cannot be calculated |
| 368 | *** Additional Tests (&) *** |
| 369 | Formula row &1 cannot not be calculated |
| 370 | The formula row &1 does not have any row operands |
| 371 | Report & & has been created by the Report Painter |
| 372 | You are changing a report of user & |
| 373 | Library & is used by report & |
| 374 | Library & is used by parallel report & |
| 375 | Report &1: Cell &2 has an invalid row address |
| 376 | Report &1: Cell &2 has an invalid column address |
| 377 | Column &: & list columns created |
| 378 | Cell name &2 is not valid |
| 379 | The column structure in formula row &1 cannot be determined |
| 380 | Enter from-level not equal to zero |
| 381 | Only negative levels '1-' and '2-' are possible |
| 382 | A report group does not yet exist for the report |
| 383 | The entry of group &1 is not valid |
| 384 | With a negative from level, a to level is not possible |
| 385 | You cannot enter a to-level which is smaller than the from-level |
| 386 | You cannot vary the selection for the period characteristic |
| 387 | Level '1' for this field only possible for the first characteristic |
| 388 | The selection formula does not exist in formula table 890 |
| 389 | Set variable & does not exist |
| 390 | Cell & has an invalid row address |
| 391 | Cell & has an invalid column address |
| 392 | Row & in key figure block & does not contain any data |
| 393 | Set & contains a formula |
| 394 | & is not a set variable |
| 395 | Set & (variable &) has been changed |
| 396 | Parallel report & is used in report group & |
| 397 | No data selected for row block & |
| 398 | Report & & is used in report group & |
| 399 | Report & & is used in parallel report & |
| 400 | Enter a name that is not already being used |
| 401 | Reference program & does not exist |
| 402 | Report &1, Column block &2: Invalid operand &3 in formula |
| 403 | You are changing a report group of user & |
| 404 | Report &1, Column block &2: Formula cannot be evaluated ( &3 ) |
| 405 | Include at least one object in report group & |
| 406 | Enter a report group |
| 407 | Enter a report group for library & |
| 408 | Report group & already exists |
| 409 | Report group & does not exist. |
| 410 | Characteristic & cannot be combined with key figures |
| 411 | Report group name & is not possible |
| 412 | Report & & does not exist. |
| 413 | Parallel report & & does not exist |
| 414 | Report group does not contain any tables to be selected |
| 415 | Save first |
| 416 | You do not have authorization to reselect data |
| 417 | Specify either library or report group to be copied |
| 418 | The report group is already being edited by user & |
| 419 | The report does not belong to the selected variation area |
| 420 | No reports have been outputted |
| 421 | *--------- Selection/Output messages -----------------------------------* |
| 422 | Position cursor on column first |
| 423 | Select block first |
| 424 | Selection exceeds row/column margin |
| 425 | Function cannot be executed (receiver report set is invalid) |
| 426 | Position cursor on row first |
| 427 | The receiver report set does not contain any reports |
| 428 | Global company & not defined in subgroup & |
| 429 | The receiver report set does not contain reports that can be called up |
| 430 | Position cursor first on section |
| 431 | Format & is not possible for parallel report & |
| 432 | Regenerate & (Report Writer changed) |
| 433 | Value & does not exist in the variation set & |
| 434 | Set & does not exist in the variation set & |
| 435 | Name & does not exist |
| 436 | You are deleting all entries & & |
| 437 | Enter level smaller or equal to & |
| 438 | No appropriate selection entries exist |
| 439 | Set & is not in the variation range for characteristic & |
| 440 | Page length of report & is too small (at least &) |
| 441 | Page width of report & is too small (at least &) |
| 442 | Selection data not found |
| 443 | Different group currencies for ledger & and & |
| 444 | Different local currencies for global company & and & |
| 445 | Entry & & & & does not exist in currency table |
| 446 | Enter a to-level that is greater than the from-level |
| 447 | Enter a valid output medium |
| 448 | Enter '0' or '1' as output format |
| 449 | Output media '0' and '3' are only possible with format '0' |
| 450 | Process report in the background (volume of data is too great) |
| 451 | Function code does not exist in the system |
| 452 | Spool number & does not exist |
| 453 | LST authorization for the specified spool number does not exist |
| 454 | Selected report row does not exist |
| 455 | Reports of the Rel. & and & are not compatible |
| 456 | Function cannot be executed for formula lines or key figure blocks |
| 457 | Position cursor in window |
| 458 | Positioning with a logical column is not possible |
| 459 | *-------- Further messages for Report Writer transactions --------------* |
| 460 | Report & & has not been changed |
| 461 | Library & has been saved |
| 462 | Library & has not been changed |
| 463 | No values were found in the selected interval |
| 464 | The library is being edited by another user |
| 465 | Characteristic & is already used in a row |
| 466 | Characteristic & is already used in a column |
| 467 | Characteristic & is already used in a selection set |
| 468 | The specified language does not exist |
| 469 | Library &1: Key figure &2 in set &3 is not allowed |
| 470 | Report & & has been saved |
| 471 | Characteristic & does not exist in library & |
| 472 | Standard layout & does not exist. |
| 473 | Parallel report & has been saved |
| 474 | Parallel report & has not been changed |
| 475 | Standard layout & has been saved |
| 476 | Standard layout & has not been changed |
| 477 | Enter a width of max. 253 characters |
| 478 | Standard layout & already exists |
| 479 | You must not change standard layout SAP |
| 480 | Unit width and right border require a column width >= & |
| 481 | Library & has been deleted |
| 482 | Parallel report & has been deleted |
| 483 | Report & has been deleted |
| 484 | Standard layout & has been deleted |
| 485 | The standard layout is being edited by another user |
| 486 | Standard layout SAP cannot be deleted |
| 487 | You are changing a standard layout of user & |
| 488 | Report & does not exist in target library & |
| 489 | Report group & has been deleted |
| 490 | Report group & has not been changed |
| 491 | Report group & has been saved |
| 492 | Symbolic name & is defined several times |
| 493 | Table & is not installed in Report Writer. |
| 494 | No free report group is currently available (repeat function) |
| 495 | System error: Standard layout SAP is not available |
| 496 | Determine column coordinate first |
| 497 | The column coordinate cannot be deleted |
| 498 | Set &: temporary sets cannot be displayed |
| 499 | No report documentation available |
| 500 | No documentation for this report group |
| 501 | The row is used in a row formula |
| 502 | The row with number & does not exist |
| 503 | Operand & points to a row formula |
| 504 | Operand & points to a key figure block |
| 505 | The formula contains invalid characters |
| 506 | The syntax in the formula is incorrect |
| 507 | The row formula does not contain any errors |
| 508 | Correct the formula |
| 509 | Row &: Totals level 1 is suppressed |
| 510 | Row & is inactive |
| 511 | All the parameters have been reset to the standard layout |
| 512 | The report already contains a selection set for characteristic & |
| 513 | The highest level is already displayed |
| 514 | The lowest level is already displayed |
| 515 | The first object in the current level is already displayed |
| 516 | The last object in the current level is already displayed |
| 517 | The key figure block does not contain any row & |
| 518 | Key figure block does not contain any column & |
| 519 | Threshold value defined (&1 rows) |
| 520 | Enter a reference column between 1 and &1 |
| 521 | You should either store or display your report |
| 522 | The row block &1 does not have type 'Set' |
| 523 | Threshold value condition deleted |
| 524 | Report was printed (spool request number &1) |
| 525 | Report section sorted according to column &1 |
| 526 | Sorting removed in current section |
| 527 | Do not select formula columns only |
| 528 | Row block no. &: set contains intervals when form printout is active |
| 529 | Layout: zero rows are hidden |
| 530 | Layout: zero columns are hidden |
| 531 | The report contains inactive columns |
| 532 | Row block no. &: Key figures and formula lines are not exported |
| 533 | Row blocks &1 and &2 do not have the same structure |
| 534 | Row block no. &2: the suppress indicator is active in set &1 |
| 535 | Row block no. &2: Characteristic &1 has a positive level of detail |
| 536 | Column block no. & does not contain a key figure set |
| 537 | Column block no. &: Key figure set contains formulas |
| 538 | Column block no. &: Key figure set has an additional set |
| 539 | Selection set & is not a basic set or a single-dimension set |
| 540 | Field &, selection set & does not specific a single value |
| 541 | Selection set &:Variation of the selection from-level unequal to to-level |
| 542 | The report group contains more than one report |
| 543 | & records have been transferred |
| 544 | Errors occurred during the data transfer |
| 545 | No data have been transferred |
| 546 | Error when reading table & |
| 547 | A single value has not been specified for characteristic & |
| 548 | *** Report group & *** |
| 549 | Report group & contains no errors |
| 550 | *--------- Further selection/output messages ---------------------------* |
| 551 | No data exists for your selection |
| 552 | A report could not be output |
| 553 | Text variable & could not be replaced |
| 554 | Position the cursor on a report row |
| 555 | Report exported to file & on presentation server |
| 556 | Report could not be exported |
| 557 | The passwords do not correspond |
| 558 | Password incorrect |
| 559 | The password has been deleted |
| 560 | The password has been reset |
| 561 | Set & does not contain any entries |
| 562 | Set & in set & does not contain any entries |
| 563 | Variation range for characteristic & in report & is not possible |
| 564 | Key figure & has been changed (regenerate report group) |
| 565 | Report group is being regenerated (key figure & changed) |
| 566 | Additional set & has been changed (regenerate report group) |
| 567 | Report group is being regenerated (change to additional set &) |
| 568 | An output file is not defined for report & |
| 569 | You cannot export to the presentation server in background processing |
| 570 | Report & does not support language & |
| 571 | Standard layout & has been changed (regenerate report group) |
| 572 | Report group is being regenerated (standard layout & changed) |
| 573 | Layout settings for report & & have been saved |
| 574 | Layout settings for & & saved and blocked for maintenance |
| 575 | Row is marked |
| 576 | You cannot import from the presentation server in background processing |
| 577 | You cannot export to the presentation server in background processing |
| 578 | Print parameters: Number of columns too small |
| 579 | The data must be saved permanently |
| 580 | Enter either group or single value |
| 581 | At least one entry required |
| 582 | Group $ does not exist |
| 583 | Error $ during the generation of the temporary object number set |
| 584 | Enter a group before activating the breakdown group function |
| 585 | Messages are defined |
| 586 | No messages are defined |
| 587 | No authorization for &1 of &2 read records |
| 588 | DDE connection to Excel has been interrupted (error code &) |
| 589 | The receiver type "&" is not supported |
| 590 | The report could not be sent (error code &) |
| 591 | There is no data saved under the name & |
| 592 | Layout settings saved |
| 593 | Layout settings could not be saved |
| 594 | Layout settings saved and blocked for maintenance |
| 595 | Report data have been selected |
| 596 | The page on the far left is already being displayed |
| 597 | The page on the far right is already being displayed |
| 598 | Enter a name not already present |
| 599 | Row texts were truncated. |
| 600 | *-------- Report Writer (600-650) --------------------------------------* |
| 601 | & & does not contain any data pages. |
| 602 | All logical columns have been suppressed |
| 603 | The list was issued on spool dataset & |
| 604 | No selection data exists for the report group |
| 605 | List is empty (function cannot be executed) |
| 606 | Select one format |
| 607 | No selection data selected for the report group |
| 608 | Standard layout tables & are inconsistent |
| 609 | No sender field is defined for the field & in table & |
| 610 | Report group is being regenerated (change set/var. &) |
| 611 | Report group is being regenerated (change to report &) |
| 612 | Report group is being regenerated (change to library &) |
| 613 | Report group is being regenerated (change to the definition) |
| 614 | Report group is being regenerated (change to Report Writer programs) |
| 615 | Set & has been changed (regenerate report group) |
| 616 | Report & has been changed (Regenerate report group) |
| 617 | Library & has been changed (please regenerate) |
| 618 | The report group has been changed (please regenerate) |
| 619 | The selected area cannot be graphically displayed. |
| 620 | Enter either a group or values for '&1' |
| 621 | Only select within one row block |
| 622 | Cursor position is invalid |
| 623 | Mark end of block |
| 624 | Block is marked |
| 625 | Block markings have been deleted |
| 626 | You have not entered a file name |
| 627 | File & could not be opened |
| 628 | Report output to file & (application server &) |
| 629 | Enter an output file |
| 630 | Parallel reports can only be output in text format |
| 631 | Cursor position is invalid |
| 632 | Column texts for key figure blocks cannot be selected |
| 633 | No valid master data for characteristic '&' |
| 634 | Reports output to spool |
| 635 | Window length & is too small (at least & rows) |
| 636 | Window width & is too small (at least & columns) |
| 637 | Report group will be regenerated (data remains) |
| 638 | Generated version of report group & is no longer up-to-date |
| 639 | No group currency unit found for ledger & |
| 640 | No valid exchange rate for currency translation from & to & |
| 641 | Unit not found for currency & (ledger &) |
| 642 | Selected data saved (name: '&') |
| 643 | Set & does not exist |
| 644 | Set & for table & must be created for field & |
| 645 | The name '&' cannot be used for the saved data |
| 646 | A list cannot be displayed for the entered set & |
| 647 | A list cannot be displayed for the entered single value & |
| 648 | Invalid graphics parameter |
| 649 | Result too large in formula evaluation |
| 650 | No currency unit found for global company & |
| 651 | *-------- Report Writer messages "Check report" (651-699) --------------* |
| 652 | The currency definition field & does not exist |
| 653 | No row defined |
| 654 | No active column defined |
| 655 | Characteristic & does not exist |
| 656 | Set & does not contain any entries |
| 657 | Set & in set & does not contain any entries |
| 658 | Row & contains formulas in more than one characteristic |
| 659 | Selection formula & is not defined |
| 660 | Charateristic & is used more than once in set & |
| 661 | Characteristic & (column &) does not exist in the library |
| 662 | Characteristic & (selection) does not exist in the library |
| 663 | Characteristic & is used repeatedly |
| 664 | Characteristic & does not exist in the library |
| 665 | The key figure set is the selection set (only one entry is possible) |
| 666 | Table & is not installed in Report Writer. |
| 667 | A key figure set does not exist |
| 668 | Row &: A key figure set does not exist |
| 669 | Column &: A key figure set does not exist |
| 670 | Characteristic & missing from report |
| 671 | In row &, one set is missing for period field & (&) |
| 672 | Characteristic & (&) is missing from a column in section & |
| 673 | &1 in key figure set &2 (row &3) does not exist |
| 674 | &1 in key figure set &2 (column &3) does not exist |
| 675 | &1 in key figure set &2 (selection) does not exist |
| 676 | In row &, characteristic & is missing |
| 677 | Characteristic & is missing from a column in section & |
| 678 | Characteristic & is not possible |
| 679 | Cell & in set & (row &) is not defined |
| 680 | Cell & in set & (column &) is not defined |
| 681 | Set variables cannot be used in a column |
| 682 | The period field cannot be defined as a set variable |
| 683 | The data field cannot be defined as a set variable |
| 684 | Set variable & contains a formula |
| 685 | Report & of library & is already being edited |
| 686 | Parallel report & of library & is already being edited |
| 687 | The key figure cell & has not yet been defined |
| 688 | Row formula with statistical key figure not possible |
| 689 | The characteristic &1 does not exist in report |
| 690 | *** Report & *** |
| 691 | Report & does not contain any errors |
| 692 | Set variable &: Default set & contains value variable |
| 693 | File name & invalid |
| 694 | Variation of the selection is not possible in parallel reports |
| 695 | Cell & addresses an invalid row/column combination |
| 696 | Row block & does not have any active columns |
| 697 | A column formula cannot be evaluated |
| 698 | A check indicator is selected in set & |
| 699 | You can only use characteristic & in the selection. |
| 700 | *---------- Control table maintenance ---------------------------------- |
| 701 | End of page has been reached |
| 702 | Beginning of page has been reached |
| 703 | Field & in table & does not exist |
| 704 | The field &2 does not exist in the Report Writer table &1 |
| 705 | Start conversion of table T804D |
| 706 | Conversion of table T804D successfully completed |
| 707 | Variable & has been changed (regenerate report group) |
| 720 | *_________ Error messages from the Check_report (2) |
| 721 | Characteristic & used more than once in the same row/column block. |
| 730 | The maximum number of line (&1) exceeded! |
| 734 | *--------- Error Messages: Archiving of Report Writer ------------------* |
| 735 | No suitable archiving object found |
| 750 | *---------- Table maintenance key figure sets (T804F) ------------------* |
| 751 | The new entry does not comply with the naming convention |
| 752 | The basic key figure &1 entered for table &2 is not defined |
| 753 | Set & entered for table & does not exist |
| 754 | Key figure sets are not allowed as additional sets |
| 755 | Multi-dimension sets with key fig.sets are not allowed as additional sets |
| 756 | You cannot delete key figure & |
| 757 | Key figure & is being used |
| 758 | Key figure & has been deleted |
| 759 | Cursor position is invalid |
| 760 | You cannot change key figure & |
| 761 | Key figure & is not used |
| 762 | Key figures not used are displayed inversely |
| 763 | No key figures have yet been defined for table & |
| 764 | Key figure &2 for table &1 does not exist |
| 765 | Error while changing key figure &2 for table &1. |
| 766 | Key figure &2 for table &1 already exists. |
| 767 | Name & for a key figure is reserved for SAP. |
| 768 | Processing terminated |
| 769 | Key figure &1: Additional set &2 belongs to another table |
| 770 | Key figure &1: Basic key figure &2 for table &3 not found |
| 771 | Key figure &1: Additional set &2 not found |
| 772 | Transport with generic key not possible for &1 |
| 773 | Transport with generic key &1 not possible |
| 774 | Report group &1: Report &2 does not exist |
| 775 | Report &1: Standard layout &2 does not exist |
| 776 | Program or report group "&" is an invalid value |
| 777 | Assign a set ID |
| 778 | Position the cursor on a report field |
| 779 | Report set & does not exist |
| 780 | The set cannot be changed |
| 781 | Enter a status |
| 782 | Report set & does not match table & |
| 783 | No errors found |
| 784 | Reports of type program must be registered |
| 785 | Assign a receiver report to the report |
| 786 | Please use the new line item report RGUGLS12 |
| 787 | Possible entries pushbutton is only supported for the presentation server |
| 788 | Application does not support automatic sending |
| 789 | No receiver could be determined for report &1 |
| 790 | Output to Excel not possible in multiple selection. |
| 791 | MS Excel Link could not be installed (rc = &1, see long text) |
| 792 | Library &1: Default set &2 does not exist |
| 793 | Report &1: Library &2 does not exist |
| 794 | Report &1 &2: Set &3 either does not exist or is not suitable |
| 795 | Report &1 &2: Variable &3 either does not exist or is not suitable |
| 796 | Object &1 &2 is in the customer namespace |
| 800 | *-----------Report maintenance------------------------------------------* |
| 801 | First enter a set. |
| 802 | The selected set does not match the table in report. |
| 803 | Enter a suitable set. |
| 804 | Only use multi-sets and key figure sets for table &1. |
| 805 | Only use variables valuable to sets in the selection definition. |
| 806 | Set & was created. |
| 807 | Set cannot be used in &1: |
| 808 | Multiple use of key figure sets is not permitted |
| 811 | Section contains rows. For this reason, it cannot be deleted |
| 812 | The first section cannot be merged with the preceding section. |
| 813 | Place the cursor on the first row of a section. |
| 814 | The section cannot be divided at the first row of the section |
| 815 | The sections have different definitions |
| 816 | Enter a summation level. |
| 817 | Enter a column number. |
| 818 | Format group was copied |
| 819 | Only digits are permitted for the summation level |
| 830 | *___________ Authorizations ___________________________________________* |
| 831 | The report '&2' is incomplete |
| 843 | You do not have authorization for these selection criteria |
| 844 | You do not have authorization to display report &. |
| 845 | You do not have authorization to generate a report group |
| 846 | You do not have authorization to select |
| 847 | You do not have authorization to output |
| 848 | You do not have authorization to use the multiple selection |
| 849 | You do not have authorization for background processing |
| 850 | You do not have authorization to display the selected data. |
| 851 | You do not have authorization for displaying key figures |
| 852 | You do not have authorization for maintaining key figures |
| 860 | *------ Error messages for report texts (function group GRWR): 861-899 |
| 861 | The clipboard is empty |
| 862 | Overlap with a text variable or a frame |
| 863 | Delete the frame first |
| 864 | The text has been saved |
| 865 | The width of the text minus the left and right margin must be > 0 |
| 866 | Select the opposite corner of the frame |
| 867 | The height of the symbol must be at least 1 |
| 868 | The width of the symbol must be at least 1 |
| 869 | The text variable has been inserted in shortened form |
| 870 | Report &1/&2 &3: Text has been converted |
| 871 | Report &/& &: No SAPscript text found |
| 872 | Report &/& &: Text has already been converted |
| 873 | Report &/& &: Error when saving the converted text |
| 874 | Report &/& &: Report is being edited by another user |
| 875 | Maintain the text in master language '&1' |
| 876 | Data for selected report groups has already been deleted |
| 877 | Data in GRRT for the selected report groups have been deleted |
| 878 | Do not select more than two entries for the comparison |
| 879 | This program can only be performed by FI-SL experts |
| 890 | *______ Error messages in the layout parameters (GRWF) |
| 891 | Enter a column number. |
| 892 | Column width must be between &1 and &2 characters! |
| 895 | Multiple use of key figure sets is not permitted |
| 900 | * Error messages: Help reports for Report Writer * |
| 901 | File name & invalid |
| 902 | File & is not a transport file |
| 903 | Place the cursor on a valid line |
| 904 | Select the objects to be processed |
| 905 | Choose a different source client |
| 906 | Client & does not exist |
| 907 | No authorization to copy from other clients |
| 908 | Program & is not yet used |
| 909 | Program & is not used |
| 910 | Program & does not exist |
| 911 | Status of all report groups set at 'Must be regenerated' |
| 912 | Internal error occurred. Error message: |
| 913 | Job for import of references created. Job name : & |
| 914 | The program name must begin with "Z" |
| 915 | Enter a valid program name |
| 916 | Enter a development class reserved for customers |
| 917 | Internal error: Client & cannot be converted |
| 918 | Enter a valid summary table |
| 919 | No document found |
| 920 | Standard reports already exist for the tables selected |
| 921 | You cannot display the layout for Report Writer reports |
| 950 | *------- Error messages: Formula variable processing in selection ------* |
| 951 | You cannot read the stored set structures |
| 952 | Undefined error during variable evaluation of & |
| 961 | Report cannot be displayed with Office integration |