HRBPS00REQUEST - Message class for benefit request

The following messages are stored in message class HRBPS00REQUEST: Message class for benefit request.
It is part of development package PBEN_BPS in software component PA-BN-BP. This development package consists of objects that can be grouped under "Benefits Points System".

Message Nr ▲	Message Text
000	You cannot enter dependent eligibility grouping for employee request only
001	You cannot enter employee eligibility grouping for dependent request only
002	You cannot enter account type for req. type with processing mode A
003	Enter an account type for req. type with processing mode B, P or Q.
004	Time unit "Period" doesn't make sense for processing mode A
005	You can only enter one of the following fields: MAXRQ, MAXPT and MAXAM
006	Selected begin date &1 greater than end date &2
007	Selected period &1 must be in range of &2,&3
008	No entry for the key &1,&2,&3,&4 in table T74_BPS17
009	Enter one of &1 and &2 at least
010	Specify a parameter group since a rule criterion is chosen
011	No parameter group needs to be specified since no criterion is chosen
012	Salary cutoff day not allowed since salary is not a criterion
013	Specify date and month or leave both fields empty
014	Age cutoff day not allowed since age is not a criterion
015	Seniority cutoff day not allowed since it is not a criterion
016	Date override not allowed since seniority is not a criterion
017	Rule not allowed since seniority is not a criterion
018	No organization assignment data available for &1
019	Make an entry in all required fields
020	No entry in V_T74_BPS08 for limit rule variant &1
021	Current benefit area will be replaced by current value
022	Infotype 0171 could not be read for person &1 on &2
023	Deduction points not allowed since processing mode of this request is &1
024	Maintain at least one field of reim. request amount percentage and limit
025	Amount to points conversion rule not allowed since processing mode is &1
026	Points to amount conversion rule not allowed since processing mode is &1
027	Specify amount to point conversion rule since processing mode is &1
028	Specify point to amount conversion rule for this kind of request type
029	Specify deduction points since the processing mode is &1
030	Reimb. request amount percent not allowed since processing mode is &1
031	Reimb. request amount limit not allowed since processing mode is &1
032	No entry for the key &1,&2 in table T74_BPS07
033	No entry for the key &1,&2 in table T74_BPS02
034	No entry for the key &1,&2,&3 in table T74_BPS11
035	No entry for benefit area &1 and acc. type &2 in table T74_BPS07
036	Date greater than 28 not allowed to input for February in non-leap year
037	The date 31st not allowed since there is no 31st in April
038	The date 31st not allowed since there is no 31st in June
039	The date 31st not allowed since there is no 31st in September
040	The date 31st not allowed since there is no 31st in November
041	Benefit area &1 of employee &2 for &3 is different from value in &4
042	No entry in table T74_BPS12 with key &1 &2 on time point &3
043	Processing mode of request type &1 not assigned yet in table T74_BPS07
044	Request type &1 is not assigned to one point account yet
045	Point account &1 balance failed
046	No request status is assigned for newly created request
047	Need to maintain request status of &1 for payroll processing
048	Enter request amount currency
049	No entry for the key &1,&2 in table T74_BPS08
050	Requests reach the limit of max. times for &1,&2
051	No entry existing for req. type &/req. limit rule variant &/key &, &
052	Employee's organizational assignment infotype not available for feature
053	Employee's personal data infotype not available for feature
054	Employee's planned working time infotype not available for feature
055	Employee's basic pay could not be obtained for the feature
056	Employee's benefits data infotype not available for feature
057	Employee's family member could not be obtained for the feature
058	Employee's eligibility grouping could not be obtained by feature
059	Dependent's eligibility grouping could not be obtained by feature
060	Choose a benefit request type firstly
061	Choose a benefit area firstly
062	Reimbursement amount limit is applicable for request type &1
063	Reimbursement percent is applicable for request type &1
064	Option points is applicable for request type &1
065	Maintain table T74_BPS12 for request type &1/options &2 on &3
066	Request amount currency is invalid &1
067	Specify a valid benefit request status
068	Total reimburse amount &3 excess maximum limit &4 for &1,&2
069	Total deduction points &3 excess maximum limit &4 for &1,&2
070	Enter eligibility grouping
071	Process mode &1 is invalid in table T74_BPS07 with &2 &3
072	No entry for the Benefit area &1 in table T5UB3
073	Employee's salary group could not be determined for request type &
074	Employee's request type limit grouping could not be obtained from feature
075	Employee &1 &2 has no valid benefit point account for this request
076	Selection period of this request type &1 is from &2 to &3 only
077	Maximum deduction points is &1
078	Maximum reimbursement amount is &1
079	No entry for the key &1 &2 in table T74_BPS13
080	Entry &1 &2 in table T74_BPS13 is incorrect
081	Check entry for key &1 &2 in table T74_BPS13
082	Error reading database table &1
083	Maximum reimbursement amount must be <= &1 &2 for request &3
084	Maximum deduction points must be less than or equal &1 for request &2
085	Check request consistency for amount or points
086	Employee &1 &2 has reached the max. times for this request type
087	No entry for the key &1,&2 on the &3 in table T74_BPS22
088	Read feature &1 failed
089	Employee eligibility group &1 is not eligible for this request type &2
090	Employee's dependent is not eligible for this request type &1.
091	You can not create request before &1
092	Method successfully executed
093	Read request failed for employee &1
094	Request type &1 is only for employee
095	Request type &1 is only for employee's dependents
096	Maintain eligibility rule for this request type &1
097	Benefit area not found for the employee &1
098	Request category error for this request &1 &2
099	Processing mode error for this request &1 &2
100	End date is before start date
101	No requests and eligible request types for selection period
102	Entry &1 &2 &3 does not exist; check your entry
103	Select one line
104	For this request type, request amount not allowed
105	You can not set request status "&1" for this request, set another one
106	Type request option
107	You are not allowed to fill pay date before &1
108	You cannot set request status "&1" after modifying data; set another one
109	The catalog of this request type is invalid for employee &1 &2 date &3
110	Employee &1 &2 is not eligible for this request type
111	Employee &1 &2 is still in penalty period for this request type
112	Status of the request will be set as "&1"
113	Req. type &1 batch input not allowed, check view - Benefit request type.
114	For employee &1 req. type &2, values you entered exceed the max. limit
115	No benefit point account for &1, &2, &3 found
116	Point account balance missing for &1 &2
117	No benefit basic data in the infotype 0171
118	Request can not be supported by hire event
119	Rounding rule and divisor must be empty since conversion factor is empty
120	Input date for this request
121	Maximum deduction points must be less than or equal &1 for account &2
122	Contact your administrator to assign benefit general info. for you
123	Failed to read requests for employee
124	Record for the selected employee &1 has been successfully executed
125	Record for the selected employee &1 is ready to be executed
126	The selected employee &1 is fully qualified for this request
127	Input selection period
128	For req type &1, RQPEX not allowed since the pro. mode is "A"
129	Contact administrator to maintain request category data (&1 &2)
130	Contact administrator to maintain processing mode data (&1 &2)
131	Contact administrator to maintain benefit point account (&1 &2 &3)
132	Contact administrator to check point account balance (&1 &2)
133	Contact administrator to check request catalog (&1, &2, &3, &4)
134	Contact administrator to check eligibility rule attribute &1, &2, &3
135	The employee &1 is unlocked now, continue to execute
136	Please maintain infotype 171 first
137	No entries found for the selection criteria specified
138	Employee without dependents is not eligible for this request type &1.
139	Status of Req. will be set as "&1" for EE &2 since no valid status is set
140	Please select family member in detail screen
141	Family member is not eligible for the request type &1, remove these data.
142	Request status will be set by "&1" after modifying data.
143	Already reached maximum deduction points for request &1
144	Already reached maximum deduction points for account &1