HRPADSA - Message Class PB KSA
The following messages are stored in message class HRPADSA: Message Class PB KSA.
It is part of development package PB24 in software component PA-PA-SA. This development package consists of objects that can be grouped under "Enhancements Master Data KSA".
It is part of development package PB24 in software component PA-PA-SA. This development package consists of objects that can be grouped under "Enhancements Master Data KSA".
Message Nr ▲ | Message Text |
---|---|
000 | Maintain Non-Registered Reason |
001 | Non-Registered Reason Invalid if Registered in Social Insurance |
002 | BEGDA Greater than ENDDA |
003 | Sponsor ID Does Not Exist in Check Table T7SA17 |
004 | Marital Status Indicated as 'Single' |
005 | Camp address key does not exist in T7SA20 |
006 | Iqama number length must be 10 characters |
007 | Document type allowed only for non-Saudi nationals |
008 | Number of Leave Passage dependents is greater than maximum allowed |
009 | The highest value must be greater than the lowest value |
010 | Maintain daily allowance percentage |
011 | Maintain lump sum periods |
012 | Daily allowance is for temporary disability only |
013 | The disability degree must not be greater than 100 |
014 | Do not maintain lump sum periods for monthly benefit |
015 | Input additional compensation fixed amount for Occupational Hazard |
016 | Input additional compensation percentage for Occupational Hazard |
017 | The standard length of a GOSI number is 9 |
018 | The standard length of National ID number is 10 |
019 | The standard length of GOSI Employer Number is 9 |
020 | The standard length of GOSI Office Key is 2 |
021 | Only the dependents of foreign employees are entitled to Leave Passage |
022 | Employee not eligible |
023 | Employee not active |
024 | Employee not assigned to a position |
025 | Promotion path not found |
026 | &1 is not suitable |
027 | Suitable position not found |
028 | ID type:&1 ID No:&2 already assigned to employee: &3 |
029 | ID type:&1 ID No:&2 already assigned to one of employee: &3 's dependents |
030 | Number of days not found |
031 | Number of hours not found |
032 | Overtime date in the past |
033 | Overtime start date not found |
034 | Overtime date is not valid |
035 | Factory calendar ID not found |
036 | Mandatory promotion condition " &1 " not met |
037 | Org.assignment data is not available |
038 | Dependents' tickets per cycle should not be empty |
039 | No entry found |
040 | Data is saved |
041 | Data save error |
042 | Select a valid line |
043 | Select one line first |
044 | Number range object is locked; contact your administrator |
045 | Cannot create a new request; try again |
046 | Cannot find the number range interval; visa management Customizing |
047 | Cannot delete data in display mode |
048 | Select data to delete |
049 | Delete the visas under this line first |
050 | Visa &1 is assigned; cannot be deleted |
051 | Visa &1 is stamped; cancel visa stamp before you delete |
052 | This visa number is already entered; change your entry |
053 | Visa number &1 already exists in system; check your entry |
054 | Visa number &1 has been assigned to employee |
055 | The number of entries of search &1 |
056 | Visa replacement failed |
057 | Visa replacement successful |
058 | Extension of visa validity failed |
059 | Extension of visa validity successful |
060 | Visa number unlocked |
061 | Cannot unlock this visa number; inform the administrator |
062 | Select one record first |
063 | Cancel one visa assignment at a time |
064 | Delete work visa record in infotype 0185 before assignment cancellation |
065 | Work visa assignment cancelled |
066 | Cannot cancel this work visa assignment; inform the administrator |
067 | Place the cursor on the record that you want to display |
068 | No visas found for extension |
069 | Maintain the request details first |
070 | Select one record and display it |
071 | Cannot stamp visa &1 because it is under amendment |
072 | Cannot stamp visa &1 because it is under extension |
073 | Cannot stamp visa &1 because it is amended |
074 | Cannot stamp visa &1 because it is already assigned |
075 | Visa &1 is already stamped |
076 | Visa &1 is assigned; cannot cancel stamp |
077 | Block visa request ID &1 has been locked by user &2 |
078 | No valid lines found for amendment |
079 | Select at least one record to modify |
080 | Visa &1 is assigned and cannot be modified |
081 | Only one visa can be assigned per time |
082 | Visa &1 already assigned to passport &2 |
083 | Visa &1 is under processing; cannot be assigned |
084 | Stamp this visa to a passport first |
085 | Visa number missing; apply for the visa number first |
086 | Approval number &1 already exists in the system for request number &2 |
087 | MOL approval number required |
088 | MOFA approval number required |
089 | MOL Approval number cannot be blank |
090 | Select at least one line |
091 | You can select up to 10 records for processing |
092 | A line with the same nationality, profession, and gender already exists |
093 | Visa &1 is under processing; cannot apply for extension |
094 | Exclude the records without visa number |
095 | No valid visa found for extension |
096 | Personnel number is not correct; check your entry |
097 | Cannot execute visa application because selected visa is not stamped |
098 | Do not process records that lack personnel numbers |
099 | Request date must be earlier than approval date |
100 | Expiry date must be later than issue date |
101 | New visa expiry date must be later than the old expiry date |
102 | New nationality is the same; leave blank if no change |
103 | New profession is the same; leave blank if no change |
104 | New gender is the same; leave blank if no change |
105 | Date of approval required |
106 | Approval date cannot be earlier than request date |
107 | Expiry date cannot be earlier than approval date |
108 | MOI Approval number &1 has already existed the system |
109 | Number of requested visa is not less than number of approved visa |
110 | &1 visa records already saved; check your entry |
111 | The request number is required |
112 | Visa details duplicated; change your entry |
113 | Enter a number greater than zero |
114 | Issue date is required |
115 | Place of issue is required |
116 | Expiry date is required |
117 | Company code &1 is not existed in the system |
118 | Passport number is required to stamp a visa |
119 | Select at least one ministry office for approval |
120 | Maintain all visa details and passport details |
121 | Company Code is required |
122 | Company Representative is required |
123 | No valid lines found for nationality amendment |
124 | No. of visa block to be amended cannot be greater than current balance |
125 | No. of visa block to be amended should be greater than 0 |
126 | Passport number of the employee &1 does not exist in infotype 0185 |
127 | The profession &1 on the employee's passport does not match this visa |
128 | Employee's nationality is &1; cannot stamp this visa |
129 | Employee is &1; cannot stamp this visa |
130 | Cannot save this record; try again or inform the administrator |
131 | Select a work visa to assign to employee &1 |
132 | Select one work visa to assign employee |
133 | Employee &1 already has a valid work visa |
134 | No applicable amendment approvals to be updated |
135 | No processing requests to be unlocked |
136 | Passport number can not be blank |
137 | Passport number can not be repeated |
138 | Passport number already exists, and has Visa number &1 |
139 | Save your changes first |
140 | No data changed |
141 | No visa assignment to be cancelled |
142 | No visa blocks available for amendment |
143 | Records have been unlocked |
144 | You are not authorized to perform & action |
145 | No visa available for extension |
146 | You are trying to stamp one or more visas whose details are incomplete |
147 | No visa found; check visa stamp, passport number, or visa record |
148 | Please choose a Visa Type |
149 | Maintain visa block lines before maintaining visa details |
150 | End of Service Date must be specify |
151 | No Organizational Unit found for position &1 |
152 | Promotion rule invalid; enter a valid promotion rule |
153 | Employee does not belongs to molga &1 |
154 | Iqama Number must start with '2' |
155 | Iqama ID must be a number |
156 | National ID must start with '1' |
157 | National ID must be a number |
158 | Approved quota cann't be more than requested quota |
159 | Number of approved quota is required |
160 | Requested quota is required |
161 | You do not have enough visas to perform this task |
162 | Visa Block is assigned to an agent and cannot be deleted |
163 | You cannot assign an unsaved Visa Block; save your changes first |
164 | This agent cannot be deleted because it is assigned to a record |
165 | MOL request number &1 already exists in the system for request number &2 |
166 | No Request ID to display |
167 | No Request ID to change |
168 | Visa issue date cannot be in a future date |
169 | Request ID is set to be external; please enter a request ID |
170 | Request ID already exists |
171 | You are not authorized to call transaction &1 |
172 | Form of address changed; gender changed accordingly |
173 | Data has been successfully copied from table T7SA47 to table T7SA56 |
174 | Nothing to copy; T7SA47 has no data |
175 | Table T7SA56 is not empty; data might be overwritten from table T7SA47 |
176 | This Sponsor ID is not assigned to the used company code |
177 | Maintaining company code is required to validate this field |
178 | Upload failure |
179 | Number of valid visas under this assignment is more than the cancellation |
180 | You can't upload more than &1 line(s) |
181 | &1 line(s) uploaded |
182 | Enter a valid ID number |
183 | Employee has faced sanctions |
184 | Plan version not found |
185 | Enter a rank with a sequence number assigned |
186 | Rank &1 does not exist; enter an existing rank |
187 | Valuated records cannot be edited |
188 | Employee has scholarship |
189 | Employee is on exceptional leave |
190 | Employee is on secondment |
191 | Employee is on suspension |
192 | Employee has a lower appraisal rating |
193 | Employee does not meet minimum service duration |
194 | Enter Qarar number and date |
195 | Employee has not completed any mandatory training |
196 | Employee has not appeared for any promotion test |
197 | Employee has not met the promotion requirement |
198 | This report is no longer supported; use report &1 instead (see note &2) |