HRPAY99PM - Nachrichten f�r das HR-Proze�managers
The following messages are stored in message class HRPAY99PM: Nachrichten f�r das HR-Proze�managers.
It is part of development package PCPM in software component PY-XX-TL. This development package consists of objects that can be grouped under "HR Process Model and Status Management".
It is part of development package PCPM in software component PY-XX-TL. This development package consists of objects that can be grouped under "HR Process Model and Status Management".
Message Nr ▲ | Message Text |
---|---|
000 | *-----Communication Manager---------------------------------------------* |
001 | No user name found for combination &1 &2 |
002 | No recipient object could be created for user &1 |
003 | Personnel numbers exist without an administrator assignment in IT 1 |
004 | Text &1 not available in language &2, therefore language &3 is displayed |
100 | *-----Process Workbench-------------------------------------------------* |
101 | The specified process &1 does not exist |
102 | Process &1 has been completed, data can only be displayed |
103 | Start is not possible-steps in process &1 are still being processed |
104 | Internal error: Model &1 of process &2 could not be read |
105 | Background processing is not possible: Selection variant is missing |
106 | Process &1 has been stopped by the breakpoint before step &2 |
107 | Because of a missing start time/date, process &1 cannot be scheduled |
108 | Please place the cursor on process &1 and start the program again |
109 | Please place cursor on package and choose 'Job Log for Package' |
110 | The process has been successfully created |
111 | Number range 'HR_PROCESS' does not exist. Please create the number range |
112 | No personnel numbers can be deleted because process has not been started |
113 | Place the cursor on a process and then call the function |
114 | Personnel numbers have been successfully deleted |
115 | No personnel numbers deleted |
116 | An error occurred when reading variant &1 of report &2 |
117 | Process cannot be deleted |
118 | Text for process to be created is missing |
119 | Internal error when creating a process. Repeat procedure |
120 | SUBMIT (in 61) ended with the return code &2 |
121 | Process model &1 has no payroll driver |
122 | This report can only be started via a process model |
123 | Process &1 is complete and cannot be restarted |
124 | Process &1 can only be started from the root |
125 | No relevant payroll area was found |
126 | No relevant payroll area found for bonus run |
127 | Selection program has no selection conditions |
128 | Value &1 is neither in the selection parameters nor in the container |
129 | No processes found for &1 |
130 | Deletion impossible because steps in process &1 are being processed |
131 | PerNo status cannot be changed because steps in process &1 are in process |
132 | Deletion impossible because steps in process &1 are scheduled |
133 | PerNo status cannot be changed because steps in process &1 are scheduled |
134 | Start impossible because steps in process &1 are waiting |
135 | PerNo status cannot be changed because steps in process &1 are waiting |
136 | Process model &1 is still used in at least one process. |
137 | Process &1 has already been scheduled and must not be started |
138 | Deletion impossible because steps in process &1 are waiting |
139 | Error when reading process model identifier for process &1 |
140 | Process &1 is already scheduled and cannot be started any longer |
141 | Changes not possible since steps in process &1 are still being processed |
142 | Process not scheduled |
143 | Step not scheduled |
144 | Place the cursor on a process or step |
145 | Error when unlocking a process |
146 | Error when deleting table T52SPE |
147 | Error when reading table T52SPE (process &1; step &2) |
148 | Error when selecting variant |
149 | You have not specified a variant |
150 | Process successfully unlocked |
151 | Specified process &1 is not locked |
152 | Error when reading selection program of process &1 |
153 | Job &1 does not exist |
154 | Error when reading job &1 |
155 | Error when updating process status in table T52SP |
156 | Error when adding new entries to table T52SPE |
157 | Error when adding new entries to table T52SPCE |
158 | Error when updating table T52SPE |
159 | Error when updating table T52SPCE |
160 | Error when deleting schedule in job overview |
161 | Error when restoring original status of table T52SPE |
162 | Error when restoring original status of table T52SPCE |
163 | Error when scheduling event &3/&4 (process &1, step &2) |
164 | SUBMIT for event (in &1) was ended with return code &2 |
165 | Error when scheduling event &3/&4 (process &1, step &2) |
166 | Error when scheduling counterevent &3/&4 (process &1, step &2) |
167 | Error when scheduling counterevent &3/&4 (process &1, step &2) |
168 | SUBMIT for counterevent (in &1) was ended with return code &2 |
169 | JOB OPEN error in submit job (process &1, step &2) |
170 | JOB CLOSE error in submit job (process &1, step &2) |
171 | Error when reading process step ID for roots of process &1 |
172 | Error when reading variant of process &1 |
173 | SUBMIT for process &3 step &4 (in &1) was ended with return code &2 |
174 | Process / step cannot be started, the system is still waiting |
175 | Error when restoring original status of table T52SPE |
176 | Error when deleting old schedule by rescheduling |
177 | Error when reading filter |
178 | Error when deleting old schedule and saving date/time |
179 | Transferred process(es) do(es) not exist in table T52SP |
180 | Error when deleting schedule from job overview and table T52SPE |
181 | No processes transferred |
182 | Error when updating the revoked field in table T52SPE |
183 | Error when updating the eventpara field in table T52SPE/T52SPCE |
184 | Error when updating the occurred field in table T52SPE |
185 | Error when reading table T52SPCE |
186 | Background event &1 does not exist |
187 | Start date is in the past, so start is impossible |
188 | Date scheduled in the past |
189 | Start date occurs after date after which no more starts are possible |
190 | Workflow event &1 does not exist |
191 | Error when updating table T52SP (process &1) |
192 | The selected function is only possible for one process |
193 | Event &1 is a counterevent for &2 |
194 | Select just one process for deletion |
195 | Process &1 cannot be deleted because you must complete it first |
196 | Object type &1 does not exist |
197 | Enter an object type |
198 | Enter an event |
199 | Error during creation of new entry in type linkage table |
200 | Process event &1 does not exist |
201 | Object type BUS7005 is not allowed (reserved for process events) |
202 | Enter a process and, if necessary, a step |
203 | Do not enter a step |
204 | Enter a step |
205 | No event specified, or object and event incorrectly separated |
206 | No parameters supported for BOR events |
207 | User cannot be changed for authorization check for this process |
208 | Error when updating statistics for &1 in set &2 |
209 | Error when updating table T52STH |
210 | Interface does not contain any data |
211 | Transaction PUST_LIM may only be accessed from one program |
212 | Variant &1 for process &2 does not exist yet |
213 | No events entered |
214 | Personnel Number &1 Was not Reprocessed |
215 | Enter a variant |
216 | No events entered |
217 | Variant &1 for process &2 does not exist yet |
218 | Personnel number &1 was not reprocessed |
219 | Error during update of table T52SPT ( process &1 ) |
220 | Incorrect cursor position |
221 | Place the cursor on a process root |
222 | No personnel numbers selected |
223 | No persons or personnel assignments selected |
224 | No personnel numbers found with status that can be reset |
225 | No persons or personnel assignments found with status that can be reset |
226 | No personnel numbers found for deletion |
227 | No persons or personnel assignments found for deletion |
228 | Personnel numbers successfully deleted |
229 | Persons successfully deleted |
230 | No personnel numbers found that satisfy selection criteria |
231 | No persons/personnel assignments found that satisfy selection criteria |
232 | Status after number generation: process &1 model &2 text &3 |
233 | Status during insert : process &1 model &2 text &3 |
234 | No personnel numbers found with status that can be changed |
235 | Neither persons nor assignments found with status that can be changed |
236 | No payroll driver permitted for selection report used |
240 | No personnel number found with status that can be changed |
241 | Status of personnel numbers succesfully changed to 'successful' |
242 | Please place cursor on Step and then call Function |
270 | Module &2 delivered return code &3 when packet &1 was started |
271 | Parameter &1 was not found in the selection parameters |
272 | The determination of DDIC type &1 was terminated due to error &2 |
273 | No suitable selection parameter was found for field &1 |
274 | Parallel processing is only possible for objects of one type |
275 | Error during package creation: there is no suitable object for &1 |
278 | No real server exists for virtual server &1 of step &2 |
300 | Action was canceled |
301 | Receiver object could not be created (process &1 - step &2) |
399 | You are not allowed to refresh the buffer for table T52SPS |
400 | *-----Process Model Maintenance-----------------------------------------* |
401 | Process model &1 is not active |
402 | Category &1 programs can not be processed in parallel |
403 | Text &1 is not yet available &2 |
404 | In breakpoint &1, parameter &2 does not have type &3 |
405 | Parameter &2 with type &3 is missing in breakpoint &1 |
406 | The interface for breakpoint &1 contains additional parameters |
407 | Program &1 with LDB &3 must not contain parameter &2 |
408 | Selection program &1 uses LDB &2, LEAVE statement is missing |
409 | Selection program &1 must not contain function module &2 |
410 | Program &1 with LDB &3 must not contain function module &2 |
411 | Program &1 contains LEAVE, therefore, it requires function module &2 |
412 | Only enter numerical values |
413 | Field &1 does not exist in structure &2 |
414 | Only 'LAST' or 'FIRST' are permitted for the occurence |
415 | Number assignment error occurred; please check the model |
416 | Category &1 for model type &2 does not exist in table T52se |
417 | Text &1 does not exist in language &2 |
418 | No jobs created yet |
419 | No events specified |
420 | Specified step &1 does not exist in model |
421 | The status tables are not written in program &1 |
422 | Enter a program name |
423 | Enter a variant name |
424 | Program category &1 already exists |
425 | Creation of a process model is not allowed in the productive system |
426 | Deletion of a process model is not allowed in the productive system |
427 | The process model could not be deleted (internal error) |
428 | Renaming a process model is not allowed in the productive system |
429 | The process model could not be renamed (internal error) |
430 | The process model &1 was renamed |
431 | It is not currently possible to process this object |
432 | The process model could not be saved (internal error) |
433 | Enter a program category |
434 | The program category &1 does not exist |
435 | Program &1 is not defined as a selection program |
436 | Assignment in the SAP standard available |
437 | Assignment Already Exists |
438 | Enter a function module name |
440 | Number assignment successfully executed |
441 | Report &1 selects for the bonus run only |
701 | Event and counterevent must not be triggered together |
702 | Instance linkage & & &: type linkage cannot be entered |
703 | The event handling settings were successful |
704 | Instance linkage & & &: type linkage cannot be deleted |
705 | Process model &V1& has been or will be used in a process PUST |
850 | Transfer of additional information on process model &1 |
851 | Correct the print parameters for process step &1 |
852 | Print parameters of process step &1 could not be saved |
853 | Creation of adr. for '&4' at step &1 ended with error &2 &3 |
854 | Transfer of print parameters for process step &1 |
855 | Transfer of recipient information for process step &1 |
856 | Creation of address for '&1' at process step &2 |
857 | &1 warnings occurred |
858 | &1 errors occurred |
859 | Transfer of additional information on process model |
860 | Transfer of additional information on process step &1 |
861 | Archiving information on process step &1 could not be found |