ICL - FS-CM: Schaden/Leistung
The following messages are stored in message class ICL: FS-CM: Schaden/Leistung.
It is part of development package ICL_CDC in software component FS-CM. This development package consists of objects that can be grouped under "FS-CM: Data Capture".
It is part of development package ICL_CDC in software component FS-CM. This development package consists of objects that can be grouped under "FS-CM: Data Capture".
Message Nr ▲ | Message Text |
|---|---|
| 000 | No entry found in table & |
| 001 | Enter the claim number |
| 002 | Function does not exist |
| 003 | Claim number is not used in notification mode and will thus be removed |
| 004 | No contract exists for this claim |
| 005 | Enter the claim type |
| 006 | Claim with this claim number already exists |
| 007 | No entry found |
| 008 | Several entries found |
| 009 | No benefit type found |
| 010 | There is a data inconsistency (Table &2, entry &1) |
| 011 | &1: Select an entry |
| 012 | Claim &1 is locked by user &2 |
| 013 | Unable to lock claim &1 |
| 014 | Enter the claim number |
| 015 | Claim number &1 does not exist |
| 016 | Table &1: No entry found |
| 017 | No internal number range exists for the claim number |
| 018 | Enter a claim date that is in the past |
| 019 | &1 is not valid for &2 |
| 020 | &2: No &1 found |
| 021 | No items in claim item list |
| 022 | Enter a claim number between &1 and &2 |
| 023 | Insurance line of business has changed |
| 024 | No object category found for claim category &1 |
| 025 | No default policy product found for insurance line of business & |
| 026 | Condition for this benefit type not found |
| 027 | Change is not allowed |
| 028 | Benefit type is not selectable |
| 029 | Check for duplicates canceled |
| 030 | Valuation basis &1 does not have any text |
| 031 | Valuation category &1 does not have any text |
| 032 | No name/description found for manufacturer &1 |
| 033 | No models exist for damage category &1 and object type &2 |
| 034 | Benefit type &1 not permitted; coverage type is empty |
| 035 | No text found for object category &1 |
| 036 | Select a valuation |
| 037 | No valid Customizing entries exist |
| 038 | Second valuation selection was deleted |
| 039 | Assign a vendor |
| 040 | Vendor & assigned |
| 041 | No insured risk address found in the contract extract |
| 042 | Enter address data |
| 043 | Enter another risk address |
| 044 | You can only maintain witnesses in expert mode! |
| 045 | More than one &1 exists for this claim |
| 046 | Claim item type &1 does not have any text |
| 047 | Complexity &1 does not have any text |
| 048 | No participant exists for the given role &1 |
| 049 | Benefit type & cannot have claim items |
| 050 | No damage category assigned to claim type &1 |
| 051 | Text for damaged object & not found |
| 052 | Text for damage severity &1 not found |
| 053 | Text for trip purpose &1 not found |
| 054 | Select a line in insured vehicles table |
| 055 | No valid active version found for internal claim type &1 from &2 |
| 056 | Confirm the address |
| 057 | Contract extract does not contain a category &1 insured object |
| 058 | Policy snapshot does not contain detailed data on insured obj.with cat.&1 |
| 059 | Function only possible for claim items |
| 060 | Select a claim item |
| 061 | Customizing error: View &1 is missing in screen sequence &2 |
| 062 | Choose a valid benefit type |
| 063 | Select a currency |
| 064 | No valid generation found for internal claim type &1 and date &2 |
| 065 | Subclaim does not exist |
| 066 | Subclaim &1 in claim &2 is currently locked by user &3 |
| 067 | Subclaim &1 in claim &2 cannot be locked (system error) |
| 068 | Enter an incident type |
| 069 | No internal claim type found to match the entries |
| 070 | No version of standard policy product & found for the claim date |
| 071 | Enter more specific selection criteria |
| 072 | No permitted coverage type found for internal claim type & |
| 073 | There are no items in the compensation calculation |
| 074 | &1 &2: No entry found in table &3 |
| 075 | No question sequence exists for facts capture |
| 076 | Claim &1 was created |
| 077 | Claim &1 was changed |
| 078 | Claim number & is not permitted |
| 079 | No product version found for policy product &1 / generation &2 |
| 080 | No product version found for policy product &1 / &2 / date &3 |
| 081 | This number is in the critical area of number range & |
| 082 | This number is the last number in number range & |
| 083 | There are no free numbers in number range & |
| 084 | Enter a resubmission date that is not in the past |
| 085 | No occurrences found for business partner & |
| 086 | Incident type & does not exist |
| 087 | No long text found for incident type &1 in language &2 |
| 088 | Incident type &1 is not permitted for line of business &2 |
| 089 | No claim line of business found for insurance line of business & |
| 090 | Enter a subobject for subobject category & |
| 091 | Enter the role of the participant |
| 092 | Enter the number of the business partner |
| 093 | Claim line of business & is not permitted for insur.line of business &2 |
| 094 | No line of business found |
| 095 | No line of business found for policy product & |
| 096 | No line of business found for incident type & |
| 097 | Line of business &1 not found |
| 098 | Line of business &1 is not permitted for policy product &2 |
| 099 | No line of business found for policy product &1/incident type &2 |
| 100 | GUI does not have Active X: Error occurred when creating & |
| 101 | Contract &1 is not available |
| 102 | Enter a contract, a policy product, or an insurance line of business |
| 103 | No generation of internal claim type &1 found for renewal date &2 |
| 104 | No version of internal claim type &1 found for generation &2 |
| 105 | No text found for coverage referral &1 |
| 106 | Coverage referral &1 does not exist |
| 107 | Overruling reason &1 does not exist |
| 108 | No text exists for overruling reason &1 |
| 109 | Renewal time is invalid |
| 110 | Renewal time must be before the claim date |
| 111 | No insured objects exist |
| 112 | No business partner number found for & |
| 113 | No claim line of business found for policy LOB &1 / incident type &2 |
| 114 | Enter a subobject category |
| 115 | Subobject category &1 does not match role &2 |
| 116 | Insurance line of business and policy product changed |
| 117 | Major error in control program with function code processing |
| 118 | Settings have been changed |
| 119 | There are no new settings |
| 120 | &1: No internal claim type exists for policy product &2 &3 &4 |
| 121 | The text for cause of loss &1 does not exist in language &2 |
| 122 | Text for incident type & does not exist |
| 123 | Text for coverage type & does not exist |
| 124 | Text for damage category & does not exist |
| 125 | Business partner & not found |
| 126 | Text for role & not found |
| 127 | Activity & not found |
| 128 | Deletion or new assignment not possible; purchasing doc. already created |
| 129 | Select an entry in the list of participants |
| 130 | Deletion of entry &1 &2 is not permitted |
| 131 | &1 in role &2 &3 &4 deleted from the list of participants/claims |
| 132 | Enter a liability rate between 0 and 100 % |
| 133 | Change to coverage type is not permitted; subclaim has been closed |
| 134 | Change to coverage type not permitted because claim items exist |
| 135 | Save your entries first |
| 136 | Claim item &1 does not exist in subclaim &2 |
| 137 | Select a coverage referral |
| 138 | You cannot create a coverage referral in display mode |
| 139 | You cannot create a coverage referral without reference to a subclaim |
| 140 | Call function module ICL_BDT_POPUP_LEAVE |
| 141 | Subclaim & is not locked; you cannot create coverage referral |
| 142 | Partner & does not have any contracts |
| 143 | Coverage referral &1 already exists |
| 144 | Enter a reason for compensability |
| 145 | Claim &1 not found |
| 146 | Enter some selection criteria |
| 147 | No subclaim found to match selection criteria |
| 148 | &1 Hit/s |
| 149 | No screen sequence found for internal claim type &1, processor gp &3, &2 |
| 150 | Some claim items are still open; pay or reject |
| 151 | Claim item list is marked as being complete |
| 152 | No screen sequence found for internal claim type &1 |
| 153 | The entry could not be deleted from the list of activities |
| 154 | Change to coverage type not permitted as damaged objects are included |
| 155 | Select a subclaim |
| 156 | Compensability cannot be set to "Yes" |
| 157 | Obligation to pay compensation set to "No", as coverage referrals exist |
| 158 | Compensability has been set to "No" |
| 159 | You cannot delete the task |
| 160 | You cannot change the task |
| 161 | Automatically generated coverage referrals cannot be deleted |
| 162 | Select a business partner |
| 163 | You can only change the coverage type if you create a subclaim |
| 164 | No new activity added (action cancelled by user) |
| 165 | There are pending tasks for subclaim &1 |
| 166 | Pending cross-subclaim tasks exist |
| 167 | Pending tasks for the claim exist |
| 168 | Navigation target not yet implemented |
| 169 | Claim item rejection reason &1 does not have any text |
| 170 | No entry found for document ID &1 in table &2 |
| 171 | Enter an application form for document &1 |
| 172 | Value for near sight is not same as value for distance sight + addition |
| 173 | Enter a subclaim or subclaim type |
| 174 | Either the entry or the text for object category &1 is missing |
| 175 | &1: No permitted damage descriptor found for value combination &2 &3 &4 |
| 176 | &1: No text found for damage descriptor &2 with claim category &1 |
| 177 | No entries found for value combination &1 &2 &3 &4 |
| 178 | Enter the claim date |
| 179 | Enter a valid complexity |
| 180 | Coverage &1 does not exist |
| 181 | User &1 does not exist |
| 182 | Policy product changed |
| 183 | No permitted activities found |
| 184 | Specify a task |
| 185 | Internal error in compensation calculation: Start not found |
| 186 | Internal error in compensation calculation: Payment not found |
| 187 | Coverage referrals of another subclaim cannot be deleted |
| 188 | Document was linked with &1 &2 |
| 189 | Telephone number & invalid: Activity canceled |
| 190 | Fax number & invalid: Activity canceled |
| 191 | Obligation to pay compensation set to "Yes" |
| 192 | Function code & not found in exit command |
| 193 | Grave error in control program during PBO processing |
| 194 | No coverage referrals exist with the claim |
| 195 | No address exists for the policyholder |
| 196 | Loss location does not exist. Enter &1 manually |
| 197 | There is no coverage referral &1 in subclaim &2 |
| 198 | Claim numbers not yet assigned |
| 199 | No user group data found for user group &1 in mode &2 |
| 200 | No user group found for user & |
| 201 | You cannot delete an empty line |
| 202 | Function for damaged object & is not supported |
| 203 | Check subrogation in light of your changes to the insurance data |
| 204 | No line exists. Create an entry |
| 205 | No data found for participation &1 |
| 206 | Set the compensation obligation for the subclaim to "Yes" |
| 207 | Set the obligation to pay compensation for the claim to "Yes" |
| 208 | There are no overruling reasons for coverage referral &1 |
| 209 | Enter a valid claim date/time |
| 210 | Changes to claimant are not permitted |
| 211 | Task &1 is not permitted; it is a purely manual task |
| 212 | Document &1 scheduled for correspondence container |
| 213 | Document &1 output |
| 214 | No claim processing submode name &1 exists in mode &2 |
| 215 | Insurance object is linked to more than one coverage of the same type |
| 216 | Navigation target &1 not found |
| 217 | Claim transaction &1 not found |
| 218 | No claim transaction found for activity &1 and mode &2 |
| 219 | Flag &1 in subclaim &2 contains a value that is not permitted |
| 220 | Enter the business partner you want to replace |
| 221 | Direct input: You did not enter the damage category for damaged object |
| 222 | Role &1 does not exist |
| 223 | Customizing: No business partner grouping has been maintained |
| 224 | Enter an existing insurance |
| 225 | Coverage &1 is not compatible with this subclaim |
| 226 | User canceled saving temporarily |
| 227 | Global memory: Old and new data must be transferred at same time |
| 228 | Subclaim &1 already exists |
| 229 | Enter a valid external claim number |
| 230 | Data on the insured object already captured has been updated |
| 231 | PAI processing canceled |
| 232 | Capture of damaged object canceled; no data captured |
| 233 | No claim found to match the selection criteria |
| 234 | Enter a recipient for document &1 |
| 235 | No participant roles exist for document &1 |
| 236 | Subclaim &1 does not exist and so you cannot lock |
| 237 | No screen sequence category found for claim proc. mode &1 and submode &2 |
| 238 | Damaged object &1 does not exist |
| 239 | Subclaim &1 does not exist |
| 240 | Task has already been completed - no change possible |
| 241 | Claim cannot be closed without a dialog |
| 242 | Grave error when changing screens: Navigation target is unknown |
| 243 | No entries found for screen sequence enhancement |
| 244 | Damaged object &1 is already linked with subclaim &2 |
| 245 | No screen sequence category found for claim proc. mode &1 and submode &2 |
| 246 | Claim not found in deputy table & & & & |
| 247 | No name for benefit type &1 in language &2 |
| 248 | Subobject cat &1 subobject &2 role &3 participant &4: Duplicate entry |
| 249 | Link subclaim &1 with a coverage in the contract |
| 250 | No benefit type found for coverage type &1 |
| 251 | No benefit type &1 found for subclaim type &2 |
| 252 | It is not possible to navigate to the intended target |
| 253 | Navigation tree does not exist |
| 254 | &1 is after &2. Enter a correct period |
| 255 | Payment number &1 payment item &2: Subclaim &3 does not exist |
| 256 | No contract currency defined. Compensation calculation not possible |
| 257 | Enter a currency for claim item &1 in subclaim &2 |
| 258 | Enter a currency for payment item &1 in subclaim &2 |
| 259 | Coverage type &1 benefit type &2: "Level of tree" field is empty |
| 260 | Different currencies in policy snapshot &1 and in policy product &2 |
| 261 | Field &1: Date in external policy system is invalid |
| 262 | Contract &1 not found |
| 263 | Error with import of contract &1 |
| 264 | Text does not exist for claims management category & & in language & |
| 265 | Policy product not transferred from policy system |
| 266 | Renewal date not transferred from policy system |
| 267 | Payment no. &1 payt item &2 subclaim &3: Benefit type &4 does not exist |
| 268 | Enter a coverage for the insured object |
| 269 | Question sequence &1 variant &2: Question &3 answer &4 transferred twice |
| 270 | Action canceled by user |
| 271 | Subclaim does not exist & & & |
| 272 | Incorrect type of benefit type for insured object |
| 273 | Benefit type &1 is not valid for coverage &2. Enter valid values |
| 274 | Benefit type &1 is not valid. Enter a valid value for the claim header |
| 275 | Select a name for the coverage |
| 276 | Select a coverage type |
| 277 | Select a valid coverage type |
| 278 | Select a valid benefit type |
| 279 | Select a valid rule |
| 280 | Select a valid insured object |
| 281 | Select a valid coverage |
| 282 | Select a business partner |
| 283 | Claim item &2 not found (subclaim &1) |
| 284 | Select an existing insured object |
| 285 | Select a name for the insured object |
| 286 | Select an object category |
| 287 | Start date must be before the end date |
| 288 | Valid-from version must be before valid-to version |
| 289 | Policy product has not been defined |
| 290 | Insured object category &1 is not supported |
| 291 | Coverage &1 does not exist |
| 292 | Coverage &1 is not compatible with coverage &2 |
| 293 | Coverage &1 has already been defined |
| 294 | Insured object &1 coverage &2 exists twice |
| 295 | Line key already exists |
| 296 | Error during conversion to UTC |
| 297 | Enter an extended coverage for this additional coverage |
| 298 | You cannot have a coverage extension with a base coverage |
| 299 | Question sequence &1 variant &2: Question &3 answer &4 not defined |
| 300 | Internal error: Risk type &1 not found |
| 301 | General BDT error |
| 302 | Application log does not exist |
| 303 | Question sequence &1 variant &2: Question &3: Give only one answer |
| 304 | Question sequence &1 variant &2: Answers do not match question sequence |
| 305 | Insurance object &1 is linked with two coverages &2 &3 of the same type |
| 306 | Enter a business partner number |
| 307 | Insured object does not have an ID |
| 308 | Insured object &1 has already been defined |
| 309 | Category of insured object &1 is missing |
| 310 | Claim closed |
| 311 | Category &1 of insured object &2 does not exist |
| 312 | Category &2 type &3 of insured object &1 does not exist |
| 313 | Coverage &1: Coverage type &2 is not defined for policy product &3 |
| 314 | Change to claim is not compatible with subclaim &1 |
| 315 | Change to claim incompatible with payments in subclaim &1 |
| 316 | Enter a business partner |
| 317 | Subclaim &1 created |
| 318 | Target subclaim (ICL_ACTUAL-DSTSUBCLAIM) must not be initial |
| 319 | Enter a valid fault |
| 320 | Enter an object category |
| 321 | Insured object &1 not found |
| 322 | Insured object &1 could not be changed |
| 323 | Object category &1 is not supported in this release |
| 324 | No specialization data exists for insured object &1 |
| 325 | No screen sequence found for clm type &1 CH gp &2 subclmType &3 submode&4 |
| 326 | No screen sequence found for processing mode &1 claim handler group &2 |
| 327 | No object screen seq. found for clm type&1 CH gp &2 damcat &3 XLIAB=&4 |
| 328 | No object screen sequence found for processing mode &1 claim hdlr grp &2 |
| 329 | No screen seq found for intl.clm type &1 CH group &2 role &3 |
| 330 | Enter a valid policy product &2 &3 for claim &1 |
| 331 | Enter a coverage first |
| 332 | Coverage type &1 is not covered. Select another coverage type |
| 333 | No screen sequence found for processing mode &1 claim handler group &2 |
| 334 | Output of document canceled by user |
| 335 | No long text found for domain &1 values &2 language &3 |
| 336 | No entry found for benefit type &1 language &2 |
| 337 | No internal claim type found for policy product &1 generation &2 |
| 338 | No valid claim item rejection reasons found for coverage type &1 |
| 339 | No cause of loss found for generation &1 claim type version &2 |
| 340 | No policy product exists |
| 341 | There is no last renewal date of the contract |
| 342 | No entry found for cause of loss &1 |
| 343 | No entry found for (sub)claim complexity &1 |
| 344 | No entry found for incident type &1 |
| 345 | Claimant must be identical to claimant in subclaim &1 |
| 346 | No entry found for fault &1 |
| 347 | No coverage referral found f. generatn &1 claim type vers &2 cov.type &3 |
| 348 | No user found |
| 349 | Error in search for long text for domain &1 values &2 language &3 |
| 350 | Claim type &1 from &2 overlaps with the entry that follows |
| 351 | Data records were activated successfully |
| 352 | Internal claim type changed |
| 353 | You cannot create a new version |
| 354 | Customizing created by user &1 |
| 355 | Transport canceled by user |
| 356 | Error in transport |
| 357 | Link between contract generation and version not found |
| 358 | Error during activation |
| 359 | No valid version exists (table &1, key &2) |
| 360 | Version that you want to copy does not exist |
| 361 | Check revealed errors |
| 362 | There is no entry in suspense |
| 363 | &1 cannot be created |
| 364 | Cancellation by user |
| 365 | Action canceled |
| 366 | Navigation not possible |
| 367 | Enter a liability rate between 0% and 100 % |
| 368 | You cannot delete the assignment, as there is no assignment to a subclaim |
| 369 | Damage category &1 is not permitted for subclaim type &2 |
| 370 | Control error: Error during flush |
| 371 | Error creating control |
| 372 | Subobject category (ICL_ACTUAL-SUBOBJCAT) must not be blank |
| 373 | Business partner &1 and insured object &2 already exist |
| 374 | Subobject cat.&1 subobject &2 role &3 participant &4: Does not exist |
| 375 | There is no suitable reply for risk type &1 |
| 376 | Claim &1 subclaim &2 does not exist |
| 377 | Claim &1 does not exist |
| 378 | No highest-level benefit type found for benefit type tree &1 |
| 379 | Policy snapshot for new claim already contains data |
| 380 | BOR event "InsClaim.Created" could not be created |
| 381 | BOR event "insClaim.Created" WF_COMMIT failed. Error &1 |
| 382 | Error in conversion to UTC |
| 383 | Reinsurance type &1 has not been defined |
| 384 | Subobject category &1 does not match role &2 |
| 385 | Check entries on requested evaluated amount and liability rate |
| 386 | Claim status &1 is invalid |
| 387 | Subclaim status &1 is invalid |
| 388 | General program error &1 when calling &2 |
| 389 | Participant &1 does not exist |
| 390 | Claim has not been closed |
| 391 | Choose a valid reason |
| 392 | Enter an amount |
| 393 | Enter a deputy |
| 394 | Navigation is not possible, because participant does not exist |
| 395 | Payment &1, item &2, item cat.&3, ben.type &4: Not cross subclaim type |
| 396 | Business partner cannot be added |
| 397 | Enter the role |
| 398 | Several subclaims can exist with this claim type |
| 399 | No subclaim covered |
| 400 | Subclaim & does not exist |
| 401 | Damaged object &1 does not exist |
| 402 | Insured object &1 does not exist |
| 403 | No higher-level covered benefit type found for benefit type &1 |
| 404 | No covered benefit type found for benefit type &1 and coverage &2 |
| 405 | Enter a title for the note |
| 406 | Enter a valid time zone for the claim |
| 407 | Enter a coverage for subclaim &1 |
| 408 | Quick claim processing not possible because there are multiple subclaims |
| 409 | Enter data on the insured object, or delete it |
| 410 | You can no longer change the coverage type |
| 411 | Select a coverage before you create a payment |
| 412 | You cannot process the claim in notification mode |
| 413 | Address could not be added (error in address management) |
| 414 | System unable to determine subclaim of claim subobject &1 &2 |
| 415 | The entry you wanted to change does not exist in the activity list |
| 416 | Enter the claim subobject category |
| 417 | Injured person: Choose a business partner in the "person" category |
| 418 | Select a valid item for participation type &1 |
| 419 | No assigned objects found for the claim |
| 420 | Coverage &1 has no coverage type |
| 421 | Enter an object number |
| 422 | Object has been assigned more than once |
| 423 | Enter an object type |
| 424 | No assignment definition found for ins.line &1/CH group &2/claim subobj&3 |
| 425 | No standard claim handler found for ins.line &1/CH group &2/clm subobj &3 |
| 426 | Claim item evaluation &1 of claim item &2 does not exist |
| 427 | &1 created note on &2 at &3 |
| 428 | Data with this UTC timestamp already exists |
| 429 | Deduction is too big |
| 430 | Claim document &1 does not exist |
| 431 | No permitted claim documents for claim type &1 (generatn &2, version &3) |
| 432 | Damaged objects cannot be assigned to any subclaim |
| 433 | Damaged object cannot be deleted |
| 434 | Coverage type &1 benefit type &2: Product rule &3 is not supported |
| 435 | Coverage type tree &1 benefit type &2: Regional rule &3 is not supported |
| 436 | Benefit type tree &1 benefit type &2: No entries exist in TICL162 |
| 437 | Delete the limit or remove the "No limit" flag |
| 438 | Delete the deductible or remove the "No Deductible" flag |
| 439 | Subclaim &1 does not exist |
| 440 | Deputy saved |
| 441 | Subclaim &1 is invalid and cannot be changed |
| 442 | Subclaim &1 cannot be converted to "No subclaim made" |
| 443 | Claim not saved. Changes to internal claim type are not permitted |
| 444 | Claim &1 subclaim &2: Original claim type not found |
| 445 | You cannot assign the object to an invalid subclaim |
| 446 | You cannot delete a subclaim that has been saved |
| 447 | Deletion not possible. First delete the payments |
| 448 | Deletion not possible. First delete the claim item |
| 449 | Change of status from &1 to &2 is not permitted |
| 450 | Invalid subclaim &1 must not contain a valid payment |
| 451 | Enter a claimant for subclaim &1 |
| 452 | Assign the claim to a claim handler group or to a claim handler |
| 453 | Select at least one line |
| 454 | Valid-from date must be before the valid-to date |
| 455 | Overlap with suspense version of internal claim type: &1 from &2 to &3 |
| 456 | Select just one line |
| 457 | Function not possible. First delete all selections |
| 458 | There is no valid generation |
| 459 | There was no valid generation on &1 at &2 |
| 460 | Versions overlap |
| 461 | Subclaim &1 status &2: Reason &3 does not exist |
| 462 | Go to the subclaim to delete the claim item |
| 463 | The claim handler group and the claim handler are not known in system |
| 464 | Claim handler &1 is not known to system |
| 465 | Claim handler group &1 is not known to system |
| 466 | Either search, cancel search, or delete |
| 467 | Subclaim was not closed |
| 468 | Enter a valid prefix for the insurance object |
| 469 | Save data before you change contract details |
| 470 | Incident type &1 does not exist |
| 471 | With a liability coverage you must not enter any insured object |
| 472 | Entries included in request &1 |
| 473 | Select at least one claim status |
| 474 | BBP: &1 |
| 475 | &1 is uninsured. Data on insured/s is retained |
| 476 | Contract information cannot be set |
| 477 | No specific help available |
| 478 | Contract &1 imported |
| 479 | You cannot delete process steps that have already been executed |
| 480 | Coverage &1 is used by subclaim &2 |
| 481 | Coverage &1 is used by insured object &2 |
| 482 | Coverage &1 is used by benefit type &2 |
| 483 | Insured object &1 is used by damaged object &2 |
| 484 | Insured object &1 is linked with coverage &2 |
| 485 | Insured object &1 is linked with benefit type &2 |
| 486 | You cannot delete process steps that have been created automatically |
| 487 | Select this line for deletion, or correct it |
| 488 | The total of all liability rates must not exceed 100%. Here: &% |
| 489 | Error when initializing pre-existing damage list |
| 490 | First select a benefit type from the tree |
| 491 | First select the claim item that you want to delete from the tree |
| 492 | Policy product changed |
| 493 | Contract changed |
| 494 | You cannot change business partner &1 |
| 495 | You are not permitted to change business partner &1 role &2 |
| 496 | You are not permitted to change business partner &1 in closed subclaim &2 |
| 497 | Change to business partner canceled |
| 498 | Changing business partner &1 as a subobject is not possible |
| 499 | A payment exists for &1 &2; it is not possible to swap the BP |
| 500 | Coverage type &1 has more than one root node |
| 501 | Higher level benefit type &3 for &2 of claim type &4 &1 does not exist |
| 502 | &1: Benefit type hierarchy for &2 contains a link |
| 503 | Coverage type &1 has an empty benefit type |
| 504 | Coverage type &1 benefit type &2 have not been defined |
| 505 | Coverage type &1 benefit type &2: Top level benefit type does not exist |
| 506 | Coverage type &1 is not permitted for policy product &2 |
| 507 | Select a valid user & |
| 508 | Select an entry |
| 509 | Plan variant does not exist |
| 510 | You do not have authorization to assign a deputy |
| 511 | Enter a figure between 1 and 100 |
| 512 | Person entering data is not authorized to release |
| 513 | You cannot swap &1 &2 &3 with an order in claim item &4 |
| 514 | Customizing error: View &1 is missing in screen sequence &2 |
| 515 | Select an occurrence of the participant |
| 516 | Payt no. &1 payt item &2 subclaim &3: Benefit type &4 not relevant |
| 517 | You are not permitted to change the contract details |
| 518 | Date created must not be after the date received |
| 519 | Creation date &1 cannot be in the future |
| 520 | Function module &3: &1 parameters expected, but &2 parameters transferred |
| 521 | Specify the subclaim |
| 522 | Enter a benefit type for the claim item grouping |
| 523 | Claim item grouping &1 does not exist in subclaim &2 |
| 524 | Cancellation of transaction "Create Participant" was unsuccessful |
| 525 | Define the standard time zone for the claim date |
| 526 | Category &1 (&2) error in the structure of the navigation tree |
| 527 | No screen sequence found for node category &1 |
| 528 | When you call ICL_TICL306_SEL, you must enter the role |
| 529 | Select a valid rejection reason |
| 530 | Enter a claimant |
| 531 | State reason why this claim is not compensable |
| 532 | Coverage type &1 cannot be opened (it is an additional coverage type) |
| 533 | Coverage type &1 claimant &2: There are no subclaims to close |
| 534 | Coverage type &1: Select either Open or Close |
| 535 | Unknown transaction code &1 |
| 536 | Select a subclaim type |
| 537 | Subclaim type &1 can only be opened once per claim |
| 538 | Claimant must not be the policyholder |
| 539 | Press "Enter" to confirm the action |
| 540 | Enter data or delete the participant |
| 541 | First complete the business partner search |
| 542 | Insured and claimant are identical; check your entries |
| 543 | Claimant must not be the third party |
| 544 | Claimant must not be the insured or the third party |
| 545 | No coverages selected |
| 546 | You can only open subclaim type &1 once per claimant |
| 547 | Only one entry permitted per subclaim |
| 548 | Delete the rejection reason or the limit and/or deductible |
| 549 | No benefit type &1 found for subclaim type &2 |
| 550 | Define the driver of the insured vehicle |
| 551 | Enter age or date of birth of driver of insured vehicle |
| 552 | Define exactly one driver of insured vehicle |
| 553 | There must only be one claim item grouping in category &1 |
| 554 | Payment items &1 &2 &3: Claim number empty |
| 555 | Compensation calculation line &1 &2 &3 &4: Incorrect +/- sign |
| 556 | Compensation calculation: Unedited item, subclaim &1, benefit type &2 |
| 557 | There are no changes |
| 558 | Field-specific changes are not supported for field &1 &2 |
| 559 | Place the cursor in a normal R/3 field |
| 560 | Assign a subclaim, or enter a claimant |
| 561 | Claims processing is not active. You cannot change subclaim &1 |
| 562 | Claims processing is already active. You cannot open subclaim &1 |
| 563 | Claims processing not active. You cannot close the claim |
| 564 | Claims processing already active. You cannot open the claim |
| 565 | Claim item grouping category does not exist |
| 566 | Claim item grouping category &1 not found |
| 567 | &1 is not a claim item grouping category |
| 568 | A claim can only be assigned to max. one cumulative event |
| 569 | "Add activity &1" added to trace/log |
| 570 | Vehicle country/region key &1 does not exist |
| 571 | Calling function module &1 added to trace/log |
| 572 | Resetting activity &1 added to trace/log |
| 573 | "Add coverage referral &1" added to trace/log |
| 574 | Deleting coverage referral &1 added to trace/log |
| 575 | CompensationCalc.: Total of all payments is different in two variables |
| 576 | Error in compensation calculation |
| 577 | Result of compensation calculation does not match the payment items total |
| 578 | Workflow started for object category &1 and event &2 |
| 579 | Document &1 proposed |
| 580 | Enter a subobject category |
| 581 | No participant available in a suitable role (&1) as recipient |
| 582 | Claim search generated |
| 583 | Business partner search generated |
| 584 | You can only create one benefit decision |
| 585 | Action cancelled. Invoice not changed |
| 586 | Only &2 is permitted as the unit for item number &1 |
| 587 | &1 (period from) is before &2 (prescription date) |
| 588 | &1 (period from) is before &2 (date of cost estimate) |
| 589 | Business partner &1 does not exist; Choose an existing business partner |
| 590 | Claim &1 subclaim &2 coverage type &3: No coverage |
| 591 | Claim &1 subclaim &2 coverage type &3: Coverage is not unique |
| 592 | Claim &1 subclm &2 coverage type &3:Insured obj. not involved in accident |
| 593 | Nodes already available with key &1 &2 &3 |
| 594 | Node category &1 is not available |
| 595 | The addition of node &1 is not possible in the navigation tree |
| 596 | A compensation calculation is not permitted when payments are reversed |
| 597 | Subclaim cannot be created |
| 598 | Change not permitted; create a new claim |
| 599 | Status "No Claim Made" is not permitted, as a payment exists |
| 600 | No services found |
| 601 | Enter an external service |
| 602 | Assign a damaged object |
| 603 | Picture position &1 for &2 not found in table of damage descriptors (&3) |
| 604 | No user name found for business partner & |
| 605 | Create & |
| 606 | Service selected without a reason for entry |
| 607 | Select a line |
| 608 | The sum of the weightings must be 100 |
| 609 | No matching categories exist |
| 610 | No reference location exists |
| 611 | Reference address is incomplete |
| 612 | Assigned service is also a contract partner |
| 613 | This benefit is not compensable at the moment |
| 614 | No organizational data found for procurement |
| 615 | Benefit & does not exist |
| 616 | The loss location is used as reference for selection of supplier |
| 617 | Error when saving control data (claim) (partner &) |
| 618 | FM &2 assigned to evaluation criterion &1 not found |
| 619 | System unable to determine claim data on basis of evaluation criterion &1 |
| 620 | No evaluation criteria found for procurement transaction type &1 |
| 621 | The following relation must apply: 0 <= weighting entry <= 100 |
| 622 | Error with list display for V_TICL121 |
| 623 | Sum of the weightings for priority &1 must be 100. Here: &2 |
| 624 | Enter a value of 1 to 99 for the priority |
| 625 | Enter a value of 0 to 100 for the lower threshold value |
| 626 | Enter a value of 0 to 100 for the upper threshold value |
| 627 | Data is inconsistent and thus cannot be saved |
| 628 | The lower threshold value is higher than the upper threshold value |
| 629 | Enter an evaluation criterion |
| 630 | Customizing: Maintain product category for benefit type & |
| 631 | You did not enter an evaluated amount |
| 632 | Error in RFC call, RFC link & |
| 633 | No business partner found for user & in remote system |
| 634 | No transaction type exists for benefit type & |
| 635 | No field &2 in ALV structure ICLVAL_ALV for priority &1 |
| 636 | The place of residence of the claimant was used for the selection |
| 637 | Error when reading DDIC information on structure ICLVALUE_ALV |
| 638 | Error when reading ICLBUT01 for evaluation criterion &1, supplier &2 |
| 639 | Evaluation criterion &1 was not used |
| 640 | & bytes transferred to local file |
| 641 | After actions(s) for event ICLSUP01, the evaluation is <0 or >100 |
| 642 | Error when determining coverage type for generation &1, version &2 |
| 643 | You did not enter a product category with claim item &1 |
| 644 | Creation of purchasing document &1 supplier &2; Do you want to continue? |
| 645 | Enter a reference number with business partner & |
| 646 | Settings for benefit type & are incomplete |
| 647 | Priority &1 does not follow directly from the next priority downwards |
| 648 | Vendor exclusion limit has been set to 0 |
| 649 | Error in list creation of weighting total in table TICL121 |
| 650 | Percentage reference for coverage &3 benefit type &4 does not exist |
| 651 | Coverage type &1 benefit type &2: Limits expected but not found |
| 652 | Error when creating a list |
| 653 | No role exists for transaction type & |
| 654 | Select a role |
| 655 | You cannot write a procurement document without claim items |
| 656 | Procurement process not permitted |
| 657 | Error reading table TICL321: POLPROD=&1, GENERAT=&2, VERSION=&3 |
| 658 | There already is a payment for this claim item |
| 659 | No corresponding item found in the document |
| 660 | Cost center and/or G/L account have not been defined |
| 661 | Enter an account assignment category for procedure type & |
| 662 | Address of the insured object is used for the selection |
| 663 | Error when reading comments on business partner &1 |
| 664 | Error when calling geo-coding program for reference point |
| 665 | Error in geo-coding program call for address of business partner & |
| 666 | Error when determining address for reference point |
| 667 | Error when determining address of business partner &1 |
| 668 | Error when determining distance |
| 669 | Enter an object type |
| 670 | Customizing error: No evaluation system defined for object type &1 |
| 671 | Enter the claim item first, and then confirm with "Enter" |
| 672 | No data has been transferred (data transfer only with double-click) |
| 673 | Internal error when reading GT_ITEMLIST with ITEM = &1 |
| 674 | Internal error when reading GT_ITEMEVLIST with ITEM=&1, EVALUATION=&2 |
| 675 | You have no authorization to make approval or rejection |
| 676 | Claim item released; transfer to procurement system is possible |
| 677 | It is not possible to reject the claim item |
| 678 | Procurement of claim item has already been rejected |
| 679 | Cannot be taken as current evaluation because of the procurement status |
| 680 | No authorization for claim category &1 &2 |
| 681 | No authorization for subclaim category &1 with activity &2 |
| 682 | Error when saving claim &1 through Direct input |
| 683 | No authorization for VIP authorization group &1 with activity &2 |
| 684 | You do not have authorization for payment & |
| 685 | System unable to find any claim number for GUID &1 in table ICLGUID |
| 686 | Error in direct input: Claim &1, subclaim &2, claim item &3 |
| 687 | No entry for claim &1, order header &2, order item &3 in ICLITEM |
| 688 | Deductible not considered |
| 689 | Procurement process canceled |
| 690 | Check the Customizing settings for picture position &1 |
| 691 | No user name defined for user &1 in procurement system |
| 692 | Procurement status does not permit deletion of the claim item: &1 |
| 693 | Error with F4 input help: Contact your system administrator |
| 694 | Combination of insurance LOB &1 and payt processing cat. &2 not allowed |
| 695 | Duplicate entry of insurance LOB "&1" and payment processing cat. "&2" |
| 696 | You did not enter a category ID with claim item &1 |
| 697 | No quantity unit stated for item &1 in the order document |
| 698 | No price unit stated for item &1 in the order document |
| 699 | No quantity unit for item &1 entered in the order document |
| 700 | Select a driver |
| 701 | Suspense entries deleted (no difference to active entries) |
| 702 | No quantity unit for item &1 entered in the order document |
| 703 | There is no data on benefit type &2 for item &1 in the order document |
| 704 | The quantity unit and object type are missing (item &1) |
| 705 | The procurement status does not allow you to call the catalog system |
| 706 | You cannot change the evaluation for paid claim items |
| 707 | Claim item has already been paid out; procurement is not possible |
| 708 | Claim item must be paid out; procurement is not permitted |
| 709 | Specify an object type of the insured/damaged object |
| 710 | No catalog ID found |
| 711 | No catalog found with key CATALOGID = &1 |
| 712 | There is no BP in claims system for BP &1 in catalog system (claim itm&2) |
| 713 | Value request &1 cannot be used as a rule |
| 714 | No BP assigned to goods recipient/orderer in procurement system |
| 715 | Total of all goods selected from catalog is zero |
| 716 | No BP in procurement system for BP &1 in catalog system (claim item &2) |
| 717 | Name for evaluation basis &1 has not been maintained |
| 718 | Evaluation basis &1 does not exist |
| 719 | Internal error when calling FM ICL_PARTNER_GET: I_PARTNER is empty |
| 720 | Internal error when reading evaluation criteria (TICL120) |
| 721 | Select at least one claim |
| 722 | Select exactly one claim handler |
| 723 | Claim item &1: No evaluation by standard evaluation system is possible |
| 724 | Error when reading text from standard procurement system &1 |
| 725 | There is more than one standard evaluation for claim item &1 |
| 726 | No tolerance group defined for user &1 (insurance line of business: &2) |
| 727 | Define a tolerance key for user &1 for insurance line of business &2 |
| 728 | There is more than one tolerance key &2 for insurance line of business &1 |
| 729 | Object type is empty |
| 730 | Order amount (= claimed amount) is zero |
| 731 | Insurance line of business &1 does not exist |
| 732 | Receipt date &1 can not lie in the future |
| 733 | Compensation tree of compensation calculation is incomplete |
| 734 | Activity &1 with determination &2 exists twice |
| 735 | Undo activity &1 with determination &2 exists twice |
| 736 | System could not read address for &1 |
| 737 | No subclaim exists |
| 738 | Subclaim &1 claim item grouping no. &2 is not a benefit decision / order |
| 739 | Subobject &1 does not exist |
| 740 | Policy number may not be changed. Subrogation is still open |
| 741 | Policy number may not be changed. Salvage is still open |
| 742 | First of all choose a category for the insured object (left column) |
| 743 | There are no values on the make for object category &1 |
| 744 | &3 &1 &2: &4 |
| 745 | Fill the role grouping parameter |
| 746 | Payout of claim item &1 with status &2 is not possible |
| 747 | Contract version &1 does not exist |
| 749 | Business partner &1 already exists in role &2 |
| 750 | RFC error (destination &1) |
| 751 | Last renewal date of contract is not a valid date |
| 752 | Participant role &1 is not supported by the contract interface |
| 753 | Object type &1 is not supported by the contract interface |
| 754 | Enter a valid contract number |
| 755 | Policy snapshot read at an invalid event |
| 756 | Read from local memory to DLVE1 (in DSAVC or DSAVE, for example) |
| 757 | Define the value request for setting the claim status |
| 758 | Define the value request for setting the subclaim status |
| 759 | Task &1 not found |
| 760 | Version &1 and version &2 of the policy product overlap |
| 761 | Deletion of main policy version is not permitted |
| 762 | Subclaim of coverage type &1 is not valid for this claim type |
| 763 | Contract does not have a valid address |
| 764 | No valid active version found for policy product &1 as from &2 |
| 765 | Role &1 does not exist |
| 766 | Program error. Contact your system administrator |
| 767 | Subclaim &1 has no data from the claims checking system |
| 768 | Question sequence &1: Multiple answers to question &2 are not permitted |
| 769 | Enter a valid path name |
| 770 | Value request &1: Invalid line |
| 771 | A rule with the same key already exists |
| 772 | Activity grouping category &1 not found |
| 773 | Node category &1: Constructor is missing (table TICL094-NODEBUILDER) |
| 774 | BRF Event &1 still has the prefix ICL. Developer: Remove prefix |
| 775 | Subclaim settings have been changed |
| 776 | Structure &1 is not supported by access module &2 |
| 777 | Procurement status does not permit payment of claim item |
| 778 | This is not a valid date |
| 779 | Maintain the entry according to mask &1 |
| 780 | Function module not found & & |
| 781 | Function (integration of data service) has not yet been implemented |
| 782 | Error in value request &1 - no value available for operation &2 |
| 783 | Choose one line only |
| 784 | System unable to execute event &1 rule &2 value request &3 |
| 785 | ICL_ACTUAL value request: Field &1 is not filled with data |
| 786 | Rule is still being used for limits and deductibles |
| 787 | This workflow is already executed with the action |
| 788 | Event &1 does not exist |
| 789 | Business object category &1 does not exist |
| 790 | Value request &1 not found |
| 791 | Event &1 cannot be executed; rule &2 contains errors |
| 792 | Create a rule line |
| 793 | Create a value request line |
| 794 | Create an action line |
| 795 | Value request &1 has been deleted |
| 796 | Action &1 has been deleted |
| 797 | Action is still being used in event &1 |
| 798 | Value request is still being used in rule &1 |
| 799 | Rule is still being used in event &1 |
| 800 | Only select results beginning with "ICL" |
| 801 | An event with key &1 does not exist |
| 802 | A rule with key &1 does not exist |
| 803 | A message with index &1 does not exist |
| 804 | Message with ID &1 and number &2 not found |
| 805 | Error in value request &1 (&2 &3 &4) |
| 806 | Structure &1 not known |
| 807 | Select an insurance type |
| 808 | Action with key &1 already being executed without a rule (line &2) |
| 809 | Duplicate entries will be deleted |
| 810 | An action with key &1 does not exist |
| 811 | Enter an action |
| 812 | One line deleted |
| 813 | &1 lines deleted |
| 814 | Select only one line for insertion |
| 815 | Rules have been inactivated |
| 816 | Rules have been activated |
| 817 | Enter an action |
| 818 | There is no version &1 of action &2 |
| 819 | Action &1 does not exist; you can create |
| 820 | Action &1 already exists, editing is possible |
| 821 | Function module &1 has reported an exception |
| 822 | Function module &1 contains parameters that are not optional |
| 823 | New action created |
| 824 | Function module &1 does not have a suitable interface |
| 825 | Function module &1 delivers either no structure or an incorrect structure |
| 826 | Function module &1 delivers no table or an incorrect table |
| 827 | Coverage referral &1 does not exist |
| 828 | New data source created |
| 829 | Data source deleted |
| 830 | Data source still in use in value request &1 |
| 831 | Data source does not exist |
| 832 | Enter a function |
| 833 | Enter a structure |
| 834 | Value request &1 does not exist |
| 835 | Entry for field &1 already exists in line &2 |
| 836 | Message class &1 does not exist |
| 837 | Message number &1 does not exist in message class &2 |
| 838 | Language not supported |
| 839 | Message number &1 already exists in operational area &2 |
| 840 | This message is already sent by the action |
| 841 | Enter a message category |
| 842 | Activity &1 does not exist |
| 843 | Text is shortened to 70 characters |
| 844 | Specify an activity |
| 845 | A document with key &1 does not exist |
| 846 | Enter a structure first |
| 847 | Action is not used |
| 848 | Rule is not used in any event |
| 849 | Data source &1 is not valid. Check Customizing (TICL136) |
| 850 | Value request &1 does not exist; you can create |
| 851 | Value request &1 already exists; you can edit |
| 852 | A bill with "character" type values is not possible |
| 853 | Category &1 values cannot be offset against category &2 values |
| 854 | Category &1 values can only contain numbers &2 |
| 855 | Double-click is only active on table lines |
| 856 | Only one decimal place is permitted |
| 857 | Choose a valid line |
| 858 | Structure &2 does not contain field &1 |
| 859 | Function module &1 does not have a suitable interface |
| 860 | Function module &1 does not exist |
| 861 | Structure &1 does not exist |
| 862 | Structure &1 is not permitted |
| 863 | &1 cannot be multiplied or divided |
| 864 | Table &1 does not exist |
| 865 | Table &1 is not permitted |
| 866 | Table &2 does not contain field &1 |
| 867 | Enter a table |
| 868 | Enter a field |
| 869 | Enter a logical operator |
| 870 | Enter a value request |
| 871 | Older versions cannot be changed |
| 872 | No changes to be saved |
| 873 | New value request created |
| 874 | Changes saved |
| 875 | There is no version &1 of value request &2 |
| 876 | There is no entry in this line |
| 877 | Select a line |
| 878 | When you select this value request, you create an endless loop |
| 879 | Enter an arithmetic operator |
| 880 | Addition of &1 to &1 is not permitted |
| 881 | No errors found |
| 882 | Enter a conversion operator |
| 883 | Date difference must be in years, months or days |
| 884 | Time difference must be in hours, minutes or seconds |
| 885 | '&1' is not a valid operator |
| 886 | Valid operators for date difference are "YR", "MON", "WEK" and "DAY" |
| 887 | Valid operators for time difference are "H", "MIN" and "SEC" |
| 888 | This field does not react to a double-click |
| 889 | Enter a relational operator |
| 890 | New rule created |
| 891 | Enter a rule |
| 892 | There is no version &1 of rule &2 |
| 893 | Rule &1 does not exist; you can create |
| 894 | Rule &1 already exists; you can edit |
| 895 | Offsetting of shorter field with longer field: Possible loss of data |
| 896 | Table &1 has not been defined |
| 897 | Rule &1 was deleted |
| 898 | Entry &1 in "Vehicle Type" field is not assigned to model &2 |
| 899 | & & & & |
| 900 | Recurring payment created and posted to CD |
| 901 | The currency of the policy has not been maintained |
| 903 | Enter a claim type |
| 904 | Key for answer from SFC is not correct in customizing |
| 905 | No value has been maintained for function code &1 |
| 906 | Enter a value for &1 |
| 907 | The approved amount has been changed. New value: &1, old value: &2 |
| 908 | Enter a benefit type |
| 909 | Benefit type &1 is not covered for claimant &2 |
| 910 | A functional impairment of over 100% is not possible |
| 912 | Benefit type &1 in payment is not possible; compensability subclaim = No |
| 999 | &1 &2 &3 &4 |