ICLCUST - Pr�fung von Customizing-Tabellen
The following messages are stored in message class ICLCUST: Pr�fung von Customizing-Tabellen.
It is part of development package ICL_CUST in software component FS-CM. This development package consists of objects that can be grouped under "Customizing Claims Management".
It is part of development package ICL_CUST in software component FS-CM. This development package consists of objects that can be grouped under "Customizing Claims Management".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Subclm type &1: Benefit type &2 for deductible should be compensation |
| 001 | Subclaim type &1: Reserve type &2 has not been defined |
| 002 | Subclaim type &1 reserve type &2: No name exists |
| 003 | Subclaim type &1 reserve type &2: Rule &3 has not been defined |
| 004 | Subclaim type &1: Benefit type &2 has not been defined |
| 005 | Cause of loss &1 has not been defined |
| 006 | Cause of loss &1: Fault &2 has not been defined |
| 007 | Cause of loss &1: No name exists |
| 008 | Cause of loss &1 fault &2: No name exists |
| 009 | Subclaim type &1: Enter a claim complexity |
| 010 | Subclaim type &1: No name exists for benefit type &2 |
| 011 | Subclaim type &1: Claim complexity &2 has not been defined |
| 012 | Subclaim type &1: No name exists for claim complexity &2 |
| 013 | Enter a benefit type |
| 014 | Coverage type &1:Benefit type &2 has not been defined |
| 015 | Coverage type &1: Top level benefit type does not exist |
| 016 | Benefit type &1: No name exists for benefit type &2 |
| 017 | Regulation priority &1: Facts capture category &2 has not been defined |
| 018 | Regulation priority &1: Name for facts capture category &2 is missing |
| 019 | Capture category &1 priority &2: Parameter &3 not defined |
| 020 | Capture category &1 priority &2: No name exists for parameter &3 |
| 021 | Capture category &1 priority &2: Question sequence &3 not defined |
| 022 | Capture category &1 priority &2: No name exists for question sequence &3 |
| 023 | Enter subclaim type &1 |
| 024 | Enter a name for subclaim type &1 |
| 025 | Coverage type &1: Coverage extension &2 has not been defined |
| 026 | Coverage type &1: Standard reserve type &2 has not been defined |
| 027 | Coverage type &1: No name exists for standard reserve type &2 |
| 028 | Subclaim type &1: Name field for benefit type &2 is empty |
| 029 | Coverage type &1: Subrogation/recvry reserve type &2 has not been defined |
| 030 | Coverage type &1: Task &2 has not been defined |
| 031 | Coverage type &1: No name exists for task &2 |
| 032 | No name exists for internal claim type in generation &1 |
| 033 | (&1 line) Name of internal claim type is consistent |
| 034 | Subclaim type &1: Coverage referral &2 is not defined |
| 035 | Subclaim type &1: No name exists for coverage referral &2 |
| 036 | Coverage type &1: Benefit type &2 for deductible has no deductible |
| 037 | Subclaim type &1: No name exists for subrogation reserve type &2 |
| 038 | Subclaim type &1: Claim document &2 is not defined |
| 039 | Subclaim type &1: No name exists for claim document &2 |
| 040 | No name exists for policy product for generation &1 |
| 041 | (&1 line) Policy product name is consistent |
| 042 | Subclaim type &1: Claim item rejection reason &2 is not defined |
| 043 | Subclaim type &1: No name exists for claim item rejection reason &2 |
| 044 | Subclaim type &1: Salvage reserve type &2 has not been defined |
| 045 | Subclaim type &1: There is no name for salvage reserve type &2 |
| 046 | Subclaim type &1: Claim status reason &2 has not been defined |
| 047 | Subclaim type &1: No name exists for claim status reason &2 |
| 048 | Subclaim type &1 benefit type &2: Application type &3 not defined |
| 049 | Assign either a BP role or a BP role grouping |
| 050 | Subclaim type &1: Damage category &2 has not been defined |
| 051 | Subclaim type &1: No name exists for damage category &2 |
| 052 | You can only enter one value: BP role or BP role grouping |
| 053 | Subclm type &1: Std. res.type &2 must not have expectation reserve flag |
| 054 | Subclaim type &1: Standard reserve type &2 is not a permitted res. type |
| 055 | Assignment for a vendor role must be 'Once for each Subobject' |
| 056 | Subclaim type &1 damage cat.&2: Damage descriptor &3 has not been defined |
| 057 | Subclaim type &1: No name exists for damage category &2 and dam.desc.&3 |
| 058 | Subclaim type &1: First define coverage type &2 |
| 059 | Subclaim type &1: Enter a name for coverage type &2 |
| 060 | Subclaim type &1: Enter a coverage type |
| 061 | Subclaim type &1: Permitted coverage types do not match one another |
| 062 | Damage category &1: Damage severity &2 has not been defined |
| 063 | Damage category &1: There is no name for damage severity &2 |
| 064 | Reference limit for benefit type &1 is incomplete |
| 065 | Subclaim type &1: Subro/salvage reserve type &2 not a permitted res.type |
| 066 | Subclaim type &1: Res.type &2 f.subro/salvage must be expectation reserve |
| 067 | Validity range of version &1 overlaps with version &2 |
| 068 | Benefit type &1: Object type &2 has not been defined |
| 069 | Benefit type &1: No name exists for object type &2 |
| 070 | Benefit type &1 object type &2: Evaluation category &3 not defined |
| 071 | Benefit type &1 object type &2: No name for evaluation category &3 |
| 072 | Benefit type &1 object type &2: Type of evaluation &3 not defined |
| 073 | Benefit type &1 object type &2: Enter a name for evaluation type &3 |
| 074 | Currency &1 for amount fields of internal claim type not defined |
| 075 | Standard complexity &1 has not been defined |
| 076 | No name exists for standard complexity &1 |
| 077 | Collections & Disbursements document type &1 has not been defined |
| 078 | No name exists for Collections/Disbursements document type &1 |
| 079 | Subclaim type &1, claim complexity &2: Enter a name |
| 080 | (&1 lines) Claim complexities are consistent |
| 081 | Claim header: Claim complexity &1 has not been defined |
| 082 | Claim header: No name exists for claim complexity &1 |
| 083 | Claim header: Claim complexity &1 name field is empty |
| 084 | Claim header: Enter a claim complexity |
| 085 | Enter a name for subclaim type &1 |
| 086 | Subclaim type &1: Standard reserve type &2: Name field is empty |
| 087 | (&1 lines) Subclaim types are consistent |
| 088 | Subclaim type &1: Enter the reason for rejection of the claim items |
| 089 | (&1 lines) Claim item rejection reason is consistent |
| 090 | Subclaim type &1 claim item rejection reason &2: No name exists |
| 091 | No entry for claim closure reason. Delete the line |
| 092 | Subclaim type &1: No name for claim closure reason &2 |
| 093 | (&1 lines) Claim closure reasons are consistent |
| 094 | Benefit type &1: Level of higher-level benefit type is wrong |
| 095 | Benefit type &1: Limit count is wrong |
| 096 | Benefit type &1: Higher-level benefit type must also be compensation |
| 097 | Benefit type &1: Higher-level benefit type must also be expenses |
| 098 | Subclaim type &1: Enter a name for coverage referral &2 |
| 099 | Subclaim type &1: Enter a coverage referral |
| 100 | (&1 lines) Coverage referrals are consistent |
| 101 | Subclaim type &1 claim document &2: Name field is empty |
| 102 | No entry for claim document. Delete the line |
| 103 | (&1 lines) Claim documents are consistent |
| 104 | Subclaim type &1: Enter a name for task &2 |
| 105 | Subclaim type &1: Enter a task |
| 106 | (&1 lines) tasks are consistent |
| 107 | Benefit type &1: Enter a rejection reason |
| 108 | Subclaim type &1: Enter a name for damage category &2 |
| 109 | (&1 lines) Damage categories are consistent |
| 110 | Subclaim type &1: Enter a damage category |
| 111 | Subclaim type &1: Enter a name for reserve type &2 |
| 112 | Subclaim type &1: Enter a reserve type |
| 113 | (&1 lines) Reserve types are consistent |
| 114 | Cause of loss &1: Name field is empty |
| 115 | Enter a cause of loss |
| 116 | Cause of loss &1 fault &2: Name field is empty |
| 117 | (&1 lines) Causes of loss are consistent |
| 118 | Damage cat.&1, damage severity &2: Name field empty |
| 119 | Damage category &1: Enter a damage severity |
| 120 | (&1 lines) Damage severity is consistent |
| 121 | Subclaim type &1 damage cat.&2 damage descriptor &3: Name field is empty |
| 122 | Subclaim type &1 damage cat.&2: Enter a damage descriptor |
| 123 | (&1 lines) Damage descriptors are consistent |
| 124 | Payment reasons for benefit type &2: Country/region &3 not defined |
| 125 | Coverage type &1 payment reasons for ben.type &2: Region &3 not defined |
| 126 | Coverage type &1 benefit type &2: Payment reason class &3 not defined |
| 127 | Coverage type &1 benefit type &2: No text exists for payment reason gp &3 |
| 128 | Coverage type &1 benefit type &2 payment reason gp &3: Text field empty |
| 129 | Coverage type &1 benefit type &2: Payment reason &3 not defined |
| 130 | Coverage type &1 benefit type &2: No text exists for payment reason &3 |
| 131 | Coverage type &1 benefit type &2 payment reason &3: Name is empty |
| 132 | (&1 lines) Payment reason groups are consistent |
| 133 | Standard complexity &1: Name field is empty |
| 134 | Collections/Disbursements document type &1: Name field is empty |
| 135 | Benefit type &1 must have the setting "Never Covered" |
| 136 | Benefit type &1 object type &2: Enter a name |
| 137 | Benefit type &1: Enter an object type |
| 138 | Benefit type &1 evaluation category &2: Enter a name |
| 139 | Benefit type &1 evaluation type &2: Enter a name |
| 140 | (&1 lines) Claim item object types are consistent |
| 141 | Benefit type &1: Unopenable coverage &3 has not been defined |
| 142 | Benefit type &1: No name exists for unopenable coverage &3 |
| 143 | Benefit type &1 unopenable coverage &2: Enter a name |
| 144 | Benefit type &1: Country/region &2 not defined |
| 145 | Benefit type &1: Region &2 has not been defined |
| 146 | Benefit type &1: Claim control rule &2 has not been defined |
| 147 | Benefit type &1: No name exists for claim control rule &2 |
| 148 | Benefit type &1: Claim control rule &2: Enter a name |
| 149 | Benefit type &1: Benefit type of ref. limit &2: Not defined |
| 150 | Benefit type &1: Benefit type of ref. limit &2: No name |
| 151 | Benefit type &1: Benefit type of ref. limit &2: Name is empty |
| 152 | Benefit type &1: Coverage type &2 for reference limit is not defined |
| 153 | Benefit type &1: Coverage type &2 for ref. limit has no name |
| 154 | Benefit type &1: Coverage type &2 for ref. limit: Name is empty |
| 155 | Benefit type &1: Rejection reason &2 has not been defined |
| 156 | Benefit type &1: There is no name for rejection reason &2 |
| 157 | Benefit type &1: Claim item rejection reason &2: No description |
| 158 | (&1 lines) Limits and deductilbes are consistent |
| 159 | (&1 lines) Benefit types are consistent |
| 160 | Benefit type &1 region &2: Region not permitted without a country/region |
| 161 | (&1 lines) Header data for internal claim type is consistent |
| 162 | Regulation priority &1 facts capture category &2: Name field is empty |
| 163 | Facts capture cat.&1 priority &2: Name field of parameter &3 is empty |
| 164 | Facts capture cat.&1 priority &2: Name field for question seq.&3 is empty |
| 165 | (&1 lines) Facts capture (question sequence) is consistent |
| 166 | Subclaim type &1: Claim item rejection reason &3 not defined |
| 167 | Subclaim type &1: Enter a name for claim item rejection reason &3 |
| 168 | Subclaim type &1: Enter a name for claim item rejection reason &3 |
| 169 | Benefit type &1: Reserve type &2 has not been defined |
| 170 | Benefit type &1: No name exists for reserve type &2 |
| 171 | Benefit type &1 reserve type &2: Name field is empty |
| 172 | Coverage type &1: Country/region &2 of statutory coverage not defined |
| 173 | Coverage type &1 region &2: Region not permitted without a country/region |
| 174 | Coverage type &1: Region &2 has not been defined |
| 175 | No name exists for coverage type &1 |
| 176 | Name field of coverage type &1 is empty |
| 177 | Coverage type &1: No name exists for coverage type &2 |
| 178 | Coverage type &1: Name field for coverage type &2 is empty |
| 179 | Claim incident type &1 has not been defined |
| 180 | There is no name for incident type &1 |
| 181 | Name field for incident type &1 is empty |
| 182 | Enter an incident type |
| 183 | Subclaim type &1: Enter a standard reserve type |
| 184 | Subclaim type &1: Enter a benefit type for the deductible |
| 185 | (&1 lines) Determination of internal claim types is consistent |
| 186 | Coverage type &1 benefit type &2 must not be "always covered" |
| 187 | Insurance line of business &1 has not been defined |
| 188 | No name exists for insurance line of business &1 |
| 189 | Name field for insurance line of business &1 is empty |
| 190 | Higher-level benefit type &2 is not valid for subclaim type &1 |
| 191 | Subclaim type &1: Enter a subrogation/recovery reserve type |
| 192 | Company code &1 has not been defined |
| 193 | No name exists for company code &1 |
| 194 | Name field for company code &1 is empty |
| 195 | Contract account category &1 has not been defined |
| 196 | No name exists for contract account category &1 |
| 197 | Name field for contract account category &1 is empty |
| 198 | Creation regulation &1 has not been defined |
| 199 | No name exists for creation regulation &1 |
| 200 | CovT &1 BenT &2: There is no limit independent of an unopenable cov.type |
| 201 | Benefit type &1: There is no limit not dependent on a country/region |
| 202 | Benefit type &1: Last limit/deductible must not have a rule |
| 203 | Benefit type &1 priority &2: Rule is never called |
| 204 | Benefit type &1: Only the last limit/deductible must not have a rule |
| 205 | Name field in creation regulation &1 is empty |
| 206 | Collections/Disbursements product group &1 has not been defined |
| 207 | No name exists for Collections/Disbursements product group &1 |
| 208 | Name field for Collections/Disbursements product group &1 is empty |
| 209 | No permitted claim handler groups have been defined |
| 210 | Claim handler group &1 has not been defined |
| 211 | (&1 lines) Assigned claim handler groups are consistent |
| 212 | ProcMode &1 user group &2: Screen sequence f. claim header does not exist |
| 213 | Subclaim type &1, subrogation reserve type &2: Enter a name |
| 214 | Processing mode &1 user group &2: No screen seq. for claim header data |
| 215 | Facts capture cat. &1 priority &2: Enter a question sequence |
| 216 | Selected benefit type &1 not permitted in claim header |
| 217 | Processing mode &1 user group &2: Screen seq. for subclaim does not exist |
| 218 | ProcMode &1 part &4 user group &2 subclmT &3: No screen sequence defined |
| 219 | (&1 lines) Claim header screen sequence determination is consistent |
| 220 | (&1 lines) Subclaim screen sequence determination is consistent |
| 221 | (&1 lines) Damaged object screen sequence determination is consistent |
| 222 | ProcMode &1 user group &2: Screen seq. for damaged obj. does not exist |
| 223 | ProcMode &1 user group &2 damage cat.&3: No screen sequence defined |
| 224 | No limits are displayed in the policy snapshot |
| 225 | Incident type &1: Enter an internal claim type |
| 226 | Start of product generation is not valid in internal claim type &1 |
| 227 | End of product generation is not valid in internal claim type &1 |
| 228 | Product generation has gaps in internal claim type &1 |
| 229 | Start of product version is not valid in internal claim type &1 |
| 230 | End of product version is not valid in internal claim type &1 |
| 231 | Product version has gaps in the internal claim type |
| 232 | CovType &1 ben.type &2: Invalid value for "Always covered" |
| 233 | Claim header benefit type &1: Application type does not match benef.type |
| 234 | Standard complexity &1 must be one of the permitted complexities |
| 235 | Benefit type &1 is both per subclaim and cross-subclaim |
| 236 | Coverage type &1 is an unopenable coverage, and so cannot be opened |
| 237 | Define at least one subclaim type |
| 238 | No benefit types have been defined |
| 239 | For this validity period there is no active version for int.claim type &1 |
| 240 | Internal claim type &1 does not exist |
| 241 | BenType&2: Cross-coverage-type limit with one subclaim per claim |
| 242 | Coverage type &1: No benefit types have been defined |
| 243 | Subclaim type &1: Enter the reserve types |
| 244 | Enter a screen sequence for the claim header |
| 245 | Enter a screen sequence at subclaim level |
| 246 | Enter the currency for limits, deductibles, and reserves |
| 247 | Coverage type &1 has no limit for benefit type &2 &3 |
| 248 | Benefit type &1 country/region &2: Enter a statutory rule |
| 249 | Benefit type &1 is both cross-coverage type and for certain coverage type |
| 250 | Screen sequence: Mode &1 user group &2: Enter a damage category |
| 251 | Coverage type &1 benefit type &2: Reserve type is empty |
| 252 | Each benefit type in the same tree must have the same reserve type |
| 253 | Coverage type &1 has general benefit type &2 &3 with same reserve type |
| 254 | Coverage type &1 ben.type &2: Level of higher-lev.ben.type must be empty |
| 255 | Subclaim type &1 benefit type &2: Reserve type &3 is not permitted |
| 256 | Subclaim type &1 benefit type &2: Reserve type is empty |
| 257 | Define benefit type &1 |
| 258 | Enter a name for benefit type &1 |
| 259 | Benefit type &1: Name field is empty |
| 260 | CovType &1 benType &2: Limit per claim item not for reserve limit |
| 261 | CovType &1 tree for benefit type &2: No limit for reserve check |
| 262 | In a live client you are not permitted to delete from the database |
| 263 | CovType &1 benType &2: "No display" should apply to expenses |
| 264 | Coverage type &1: Value for uppermost benefit type &2 is not valid |
| 265 | CovType &1: BenType &2: relevant for reserve limit, but no display |
| 266 | Ben.type tree &1 ben.type &2: Reserve type must be &3 (top benefit type) |
| 267 | CovType &1: Benefit type &2 not marked for reserve limit |
| 268 | Define or correct payment method &1 |
| 269 | Define payment type &1 |
| 270 | Enter a name for payment type &1 |
| 271 | Payment type &1: Name field is empty |
| 272 | Benefit type &1 country/region &2: No cross-region limit exists |
| 273 | Action terminated |
| 274 | Currency of internal claim type &1 gen.&2 version &3 is different |
| 275 | Claim type version is not being used by any active policy product |
| 276 | Currency of policy product &1 gen. &2 version &3 is not the same |
| 277 | Benefit type &1: Product rule is not valid |
| 278 | Benefit type &1: No limit or deductible permitted |
| 279 | Claim control rule &1 not defined |
| 280 | No name has been defined for claim control rule &1 |
| 281 | Name for claim control rule &1 is empty |
| 282 | Benefit type &2: No rejection reason specified |
| 283 | Benefit type &1: Regional rule has invalid value &2 |
| 284 | Programs generated successfully |
| 285 | Enter a value for the CD specification |
| 286 | Define CD specification &1 in Customizing |
| 287 | Enter a value for the value of the contract prefix in Customizing |
| 288 | Subclaim type &1: Enter a salvage reserve type |
| 289 | Subclaim type &1, salvage reserve type &2: Enter a name |
| 290 | No value request for setting claim status has been defined |
| 291 | No value request for setting subclaim status has been defined |
| 292 | Value request &1 for setting claim status has not been defined |
| 293 | Value request &1 for setting subclaim status has not been defined |
| 294 | Coverage type &1 benefit type &2: Enter a valid application type |
| 295 | Change not permitted: Internal claim type version is not in suspense |
| 296 | Internal claim type &1 generation &2 version &3 does not exist |
| 297 | Policy product &1 generation &2 version &3 does not exist |
| 298 | Benefit type &1 must not be used across coverage types |
| 299 | Benefit type &1 can only be used across coverage types |
| 301 | Coverage type &1: Enter a benefit type tree |
| 302 | CovType &1 BenType &2: Benefit type definition: Loss/expenses empty |
| 303 | Ben.type &1:Probationary periods selected, but no rejection reason given |
| 304 | (&1 lines) Permitted coverage types are consistent |
| 305 | Relationship category &1: Each relationship cat. may be used only once |
| 306 | Benefit type "&1" does not exist |
| 307 | Generation &2 of policy product &1 does not exist |
| 308 | Generation &2 Version &3 of policy product &1 does not exist |
| 310 | No formula found |
| 311 | Generation &2 of internal claim type &1 does not exist |
| 312 | Generation &2, version &3 of internal claim type &1 does not exist |
| 313 | Generation &2 of policy product &1 does not exist |
| 314 | Generation &2 Version &3 of policy product &1 does not exist |
| 315 | SAP Delivery client: No new version permitted |
| 316 | There is a transport entry from another system or another client |
| 320 | PolProd/CovType &1: Benefit Type not found in BenTypeTree &2 Gen.&3 Ver&4 |
| 321 | PolProd/CovT &1: BenType top node not same: BenType tree &2 Gen &3 Ver &4 |
| 325 | Insurance line of standard policy product does not match line &1 |
| 326 | In scenario without product customizing, the whole claim must be locked |
| 330 | The node category field must not be empty |
| 335 | Version &1 changed &2 is later than version &3 changed &4 |
| 350 | Assigned benefit type tree &1 is not permitted |
| 351 | Cov.type &1: Set the flag "For Coverage Type" in ben.type tree &2 |
| 352 | Claim type & already exists. Select a different claim type |
| 353 | Internal claim type version &1 generation &2 version &2 does not exist |
| 354 | Intl Clm Type &1 &2 &3: Flag "For Subclaim" must not be set |
| 355 | Int.clm type &1 &2 &3, sType &4: Set the flag "For Subclaim" |
| 356 | PolProd &1 &2 &3: You are not allowed to set the "For Subclaim" flag |
| 357 | PolProd &1 &2 &3: SubclmType &4: Set the "For Subclaim" flag |
| 358 | CovType &1: Set the "For Coverage Type" flag in benefit type tree &2 |
| 401 | Select a version to make a comparison |
| 402 | No applicable versins exist |
| 451 | Operation can only be executed at the top level |
| 452 | Multiple selection is not supported in this activity |
| 453 | Data sets written to transport request |
| 454 | No active versions found at current time |
| 500 | Currency &1 has not been defined |
| 501 | No currency defined |
| 502 | No standard time zone defined |
| 503 | Enter a coverage type |
| 504 | Coverage type &1 has not been defined |
| 505 | Coverage type &1: Extended coverage type &2 not defined |
| 506 | Coverage type &1: Unopenable coverage (&2) cannot be extended |
| 507 | Cov.type &1 is an unopenable cov.type and cannot have a base coverage(&2) |
| 508 | Unopenable coverage &1 must have an extended coverage type |
| 509 | Coverage type &1: Only an unopenable coverage can extend another coverage |
| 510 | Coverage type &1: Base coverage &2 has not been defined |
| 511 | (&1 lines) Permitted coverage types are consistent |
| 512 | (&1 lines) Policy product version is consistent |
| 513 | (&1 line) Non-time-dependent settings are consistent |
| 514 | Extended coverage &1 must not be dependent on country/region |
| 515 | Extended coverage &1 must not be "Always covered" |
| 516 | Enter a line of insurance |
| 517 | The node category cannot be used for subclaim processing |
| 518 | Specify a subclaim type |
| 519 | The node category cannot be used for header processing |
| 551 | "Version Table" of internal claim type has not been entered |
| 552 | "Table Type" field must contain the value "Internal Claim Type" |
| 553 | The "Version Table" field must be filled for versioned tables |
| 554 | Internal claim type: Dependent table has not been entered |
| 555 | The "Version Table" field has been filled incorrectly |
| 556 | "Version Table" of benefit type tree has not been entered |
| 557 | "Table Type" field must have the value "Benefit Type Tree" |
| 558 | Benefit type tree: Dependent table has not been entered |
| 559 | Benefit type tree: Dependent table has not been entered |
| 560 | "Table Type" field contains &1 even though a suitable key fld is missing |
| 561 | "Version Table" of policy product has not been entered |
| 562 | "Table Type" field must contain the value "Policy Product" |
| 564 | Policy product: Dependent table has not been entered |
| 565 | "Table Type" field contains &2, not &1 |
| 566 | The application table has not been entered |
| 600 | Node selected |
| 601 | Error in comparison |
| 602 | No differences found |
| 603 | &1 differences found |
| 604 | Select a node first |
| 632 | No name exists for benefit type tree in generation &1 |
| 633 | (&1 line) name of benefit type tree is consistent |
| 702 | &1 &2: No inconsistencies through deletion |
| 714 | Insurance line: &1 coverage type: &2 amount authorizations payments |
| 715 | Specification of FS-CD posting: &1 policy product version |
| 720 | Fault: &1, internal claim type: &2: Permitted cause of loss |
| 721 | Participation type of claimant: &1 position of person in vehicle |
| 722 | Overruling reason: &1 coverage referral: &2 assignment |
| 774 | Currency &1 for amount fields of benefit type tree not defined |
| 801 | Select a view cluster |
| 802 | Original version &1 not found |
| 803 | Original version &1 has status &2 |
| 804 | Original version &1 is not unique |
| 846 | No currency has been defined for limits, deductibles, and reserves |
| 876 | Currency of internal claim type &1 gen.&2 version &3 is different |
| 877 | Currency of policy product &1 generation &2 version &3 is different |
| 885 | You can delete the entries without there being any inconsistencies |
| 886 | Inconsistencies might occur. Delete the entries individually |
| 887 | Coverage type &1 benefit type &2 |
| 999 | &1 &2 &3 &4 |