IM - Maintenance notifications
The following messages are stored in message class IM: Maintenance notifications.
It is part of development package IWOC in software component PM-WOC-MN. This development package consists of objects that can be grouped under "Application Development R/3 Work Order Cycle".
It is part of development package IWOC in software component PM-WOC-MN. This development package consists of objects that can be grouped under "Application Development R/3 Work Order Cycle".
Message Nr ▲ | Message Text |
|---|---|
| 001 | ****** Messages for PM Objects (func.locs/equip/assembly) ****** |
| 002 | Functional location & does not exist |
| 003 | Equipment & does not exist |
| 004 | Location/acct assignment data does not exist for PM notification & |
| 005 | No catalog profile has been maintained for notification category & |
| 006 | Functional location & copied from equipment |
| 007 | Functional location will be removed, since equipment not installed |
| 008 | Please enter functional location or equipment |
| 009 | No functional location or equipment entered |
| 010 | Location data copied from equipment & |
| 011 | Maintain location data |
| 012 | Location data copied from functional location |
| 013 | Explosion not possible w/o entering an affected funct.loc. or equipment |
| 014 | Enter a material number |
| 015 | Invalid serial number and material number |
| 016 | Serial number and material number copied from equipment & |
| 017 | An equipment must be entered before making an assembly selection |
| 018 | No bill of material exists |
| 019 | No reference object selected |
| 020 | Equipment &1 not in the structure of equipment &2 |
| 021 | Functional location &1 not in the structure of functional location &2 |
| 022 | Please enter equipment |
| 023 | Assembly does not form part of the equipment BOM |
| 024 | Equipment has no bill of material |
| 025 | System: PM notification locked at the moment, so cannot be processed |
| 026 | System: Error, cannot be locked |
| 027 | System: Field overflow in field & |
| 028 | PM planning plant not identified |
| 029 | No hierarchy exists |
| 030 | Functional location invalid |
| 031 | Equipment number invalid |
| 032 | Material number & invalid |
| 033 | No valid selection mode |
| 034 | Object affected copied from the notification |
| 035 | The PM notification refers to equipment & |
| 036 | The PM notification refers to functional location & |
| 037 | Cannot have an assembly without entering an equipment |
| 038 | Changes to equipment not allowed, since assembly already created |
| 039 | Different planner groups, please check data |
| 040 | Select a valid line |
| 041 | System: error when reading notification category table. Key: & |
| 042 | Assembly & is not valid |
| 043 | Location data does not exist for equipment &1 at time &2 |
| 044 | Location data does not exist for equipment &1 at time &2 |
| 045 | Entry & is not available in table & |
| 046 | The installed equipment &1 was copied |
| 047 | No internal number assignment is allowed for notif. type & -> long text |
| 048 | Number range for notification type & incorrectly maintained -> long text |
| 049 | Assembly & is flagged for deletion |
| 050 | & notifications were entered in the period checked |
| 051 | & notifications completed in the period checked |
| 052 | Processing time in the period checked was & days |
| 053 | The number of breakdowns entered in the period checked was & |
| 054 | Outstanding notifications exist. |
| 055 | Notifications exist in the period checked |
| 056 | No response profile could be defined. |
| 057 | No service profile could be defined |
| 058 | Note: service contract! |
| 059 | Object information is not available for the current object type. |
| 060 | Note: classification information! |
| 061 | Enter a sales area. |
| 062 | The combination of sales org., distrib.channel & division is not allowed |
| 063 | Plant & is not allowed for the sales org. and distrib.channel |
| 064 | & orders were created in the period checked |
| 065 | & orders were completed in the period checked |
| 066 | Sales order creation is not possible for this notification type |
| 067 | No valid contract exists for the reference object |
| 068 | Equipment &1 has a warranty until &2 |
| 069 | Maintenance contract was redetermined |
| 070 | Sales org., dist. channel and division from object and notif. differ |
| 071 | Sales org., dist.channel and division fr. location data and notif. differ |
| 072 | Sales order for notification & already created |
| 073 | Item &1 not available for sales document number &2 |
| 074 | Only maintenance/service notifications can be processed |
| 075 | Message &1 has order assignment; not possible to save using message BAPI |
| 076 | Status profile has been changed |
| 090 | Position cursor |
| 100 | ****** QA catalog messages ************* |
| 101 | Maintenance catalog & does not exist |
| 102 | Code group &1 code group version &2 does not exist |
| 103 | No entries exist for selection criteria &1 &2 |
| 104 | Code group & contradicts the code group of the catalog profile |
| 105 | Code group cannot be identified uniquely |
| 106 | Catalog type &1 code group &2 does not exist |
| 107 | Invalid catalog entry |
| 108 | Code & does not exist |
| 109 | Code group & does not exist |
| 110 | Defect catalog text does not exist |
| 111 | Task catalog text does not exist |
| 112 | Activity catalog text does not exist |
| 113 | Object component catalog text does not exist |
| 114 | Cause catalog text does not exist |
| 115 | Code group for damage not contained in the catalog |
| 116 | Code group for object component not contained in the catalog |
| 117 | Code group for cause not contained in the catalog |
| 118 | Code group for task not contained in the catalog |
| 119 | Code group for activity not contained in the catalog |
| 120 | Class & does not exist |
| 121 | No valid sign set |
| 122 | Assembly & does not exist |
| 123 | Assembly &1 in planning plant &2 does not exist |
| 124 | Status cannot be determined |
| 125 | Code group & and notification type & are incompatible |
| 126 | Note individual catalog profile & |
| 127 | No code groups exist for this generic entry |
| 128 | Catalog type &: no code groups exist for this generic entry |
| 129 | Catalog profile cannot be copied |
| 130 | Catalog profile copied from equipment |
| 131 | Catalog profile copied from the functional location |
| 132 | & tasks were created from the response profile |
| 133 | Catalog profile copied from the notification type |
| 134 | Catalog profile &1 not allowed for notification category &2 |
| 135 | Catalog profile cannot be copied |
| 136 | Catalog profile cannot be copied |
| 137 | Catalog profile cannot be copied |
| 138 | Catalog profile cannot be copied |
| 139 | No tasks found for the response profile |
| 140 | Enter code for the task |
| 141 | Enter code for the object part |
| 142 | Enter code for the problem |
| 143 | Enter code for the cause |
| 144 | Enter code for the activity |
| 145 | Enter code group for the activity |
| 146 | The view is only changeable if a reference object has not been assigned |
| 147 | Problem during number assignment item record |
| 148 | Problem during number assignment cause record |
| 149 | Problem during number assignment activity record |
| 150 | Please enter code for code group |
| 151 | Please enter code group for code |
| 152 | Problem during number assignment task record |
| 153 | No selection made |
| 154 | Code group entered does not exist in catalog &1 |
| 155 | The partner funct. entered is not defined in determination procedure & |
| 156 | Partner type of the partner function entered is not allowed |
| 157 | Material catalog profile copied |
| 158 | No log for follow-up action is available |
| 159 | Partner type of the partner function entered is not allowed |
| 160 | Changing the reference object not allowed since object list exists |
| 161 | Cat. profile & not suitable for notif. cat. Plant Maintenance/Cust. Serv. |
| 162 | Only value & allowed for address access sequence of material components |
| 163 | Enter the access sequence in ascending order |
| 164 | Only use each object for address access sequence once |
| 165 | Enter code and code group |
| 166 | The current catalog profile does not allow a change in catalog profile |
| 167 | No partners could be determined |
| 168 | Notification partner determined |
| 169 | Task agent determined |
| 170 | Notification partner and task agent determined |
| 171 | Please enter equipment |
| 200 | ************* PM Notification Item Classification ************* |
| 201 | Please enter class (class hierarchy root) |
| 202 | No class allocations exist |
| 203 | Class & does not exist |
| 204 | Invalid class |
| 205 | Class locked |
| 206 | Multiple classification not allowed |
| 207 | System error during classification |
| 208 | You have no authorization for classification |
| 209 | No valid sign set |
| 210 | Item & was classified |
| 211 | The class was taken from the catalog profile |
| 212 | Class type cannot be used for classifying errors |
| 213 | Enter a class type when classification is active |
| 214 | No sub-class exists |
| 215 | No class was selected |
| 216 | Recursivity in class & |
| 217 | Class & has invalid status |
| 218 | Please enter a class type for classifying errors |
| 219 | You have no error classification active |
| 220 | No standard class type defined for error |
| 221 | Classification data for item & was deleted |
| 222 | Subscreen data for notification type & not maintained |
| 223 | Subscreen data for subscreen category &1 not maintained |
| 224 | A new classification is possible after leaving the notification |
| 250 | *********** PM Notification Status Management *********** |
| 251 | Invalid object category (status management) |
| 252 | Status object already exists |
| 253 | Invalid status profile |
| 254 | Invalid object number (status management) |
| 255 | Invalid new object number (status management) |
| 256 | Invalid old object number (status management) |
| 257 | Status number already exists |
| 258 | Object does not exist (status management) |
| 259 | Inconsistent status |
| 260 | Status not allowed |
| 261 | PM notification already completed |
| 262 | Operation not allowed |
| 263 | Operation not allowed for notification & |
| 264 | New entry not possible, since notification already completed |
| 265 | Completion not possible, since not all tasks carried out |
| 266 | Status management: Task object type for notif.category & not maintained |
| 267 | Notification is completed -> can only be displayed |
| 268 | Notification & can not be completed |
| 269 | Notification & can not be completed since task(s) still outstanding |
| 270 | Object list does not contain any notifications |
| 271 | Order & is technically completed; no assignment possible |
| 272 | Order & technically completed; no change possible |
| 273 | Deletion of notification allocation to order & not allowed |
| 274 | Status management: Please check status for reference object |
| 275 | Reference object for business operation not allowed |
| 276 | Notification is flagged for archiving; only display is possible |
| 277 | An error occurred whilst processing the notification |
| 278 | The operation is not permissible for material no. &1 and serial no. &2 |
| 279 | Error in processing notification &1, item &2, cause &3 |
| 280 | Error in processing notification &1, item &2 |
| 281 | Error in processing notification &1, task &2 |
| 282 | Error in processing notification &1, activity &2 |
| 283 | You cannot delete the entry |
| 284 | Notification type & does not support permit process |
| 285 | Notification &1: Inconsistency Phase/Status Management |
| 286 | Status of notification & does not allow notif. assignment to be deleted |
| 287 | Status of task &1 created from action box cannot be changed |
| 288 | Status of task &1 cannot be changed due to follow-up action |
| 300 | *********** Print Notifications *********** |
| 301 | Check print control, return code & |
| 302 | Error in print control |
| 303 | Invalid key while processing print protocol |
| 304 | Termination while printing notification |
| 305 | Printing notification not possible in display mode |
| 306 | Notification was not yet printed |
| 307 | Shop papers will not be printed |
| 308 | Shop papers will be printed after saving |
| 309 | No items exist |
| 310 | Only one cause record may be created |
| 311 | Only one item record may be created |
| 312 | Notification is downloaded on saving |
| 313 | The shop papers are printed when you exit the transaction |
| 314 | Assigned order could not be frozen |
| 315 | Shop papers have been printed - changes have not yet been saved |
| 350 | ******** Notification Word Processing ********* |
| 351 | No long text exists for notification |
| 352 | No long text exists for notification item |
| 353 | No cause long text exists |
| 354 | No task long text exists |
| 355 | No activity long text exists |
| 356 | Create item before creating item long text |
| 357 | Create task before creating task long text |
| 358 | Task &1 for notification &2 not available |
| 400 | ********** General PM Notification Processing ************** |
| 401 | Please enter equipment |
| 402 | Please enter functional location |
| 403 | Location data taken from functional location & |
| 404 | Location data taken from equipment & |
| 405 | Notification & saved |
| 406 | Notification & deleted |
| 407 | No changes made |
| 408 | Notification & completed |
| 409 | Function code not defined |
| 410 | No items exist |
| 411 | No activities exist |
| 412 | No tasks exist |
| 413 | No further selected records |
| 414 | Select item |
| 415 | Please enter task text |
| 416 | Notification &1 locked by &2 |
| 417 | Error during locking of notification |
| 418 | Notification & still locked |
| 419 | Notification locked --> Display |
| 420 | Notification already completed, deletion no longer possible |
| 421 | Notification type & not defined |
| 422 | Origin indicator not maintained for notification type |
| 423 | Notification type is initial |
| 424 | Error during date calculation: Date before reference time |
| 425 | Error during date calculation: Date too high |
| 426 | Error during date calculation: Time entered not numerical |
| 427 | Error during date calculation: Panel not in control table |
| 428 | Error during date calculation: Panel not in control table |
| 429 | Number range for notification type & not maintained |
| 430 | External number assignment, please enter notification number |
| 431 | Notification number & already exists |
| 432 | Error during number assignment: Interval not found |
| 433 | Number range does not allow external number assignment |
| 434 | Error during number assignment: Object not found |
| 435 | No record to be deleted available or selected |
| 436 | Please enter at least one item text |
| 437 | Please place cursor on desired field |
| 438 | Effect not defined |
| 439 | System state not defined |
| 440 | Enter a planning plant |
| 441 | Planner group does not exist in planning plant |
| 442 | Proposed reference date not maintained for completn of notification type |
| 443 | Malfunction start will be set as reference date |
| 444 | Malfunction end will be set as reference date |
| 445 | Date of entry will be set as reference date |
| 446 | Reference date for completion will be determined by notification type |
| 447 | Reference time was corrected acc. to equipment usage time period |
| 448 | Notification &1 saved, order &2 created |
| 449 | Status admin.: object category not maintained for notification category & |
| 450 | No conversion of units of measure possible |
| 451 | Variations in the dimensions of the units of measure |
| 452 | Division by zero |
| 453 | Overflow during conversion |
| 454 | Unit & missing in the check table |
| 455 | Unit missing in the check table |
| 456 | Notification category not maintained for notification type & |
| 457 | Notification category not maintained for transaction & |
| 458 | Transaction &1 not allowed for notification type &2 |
| 459 | Notification &1 saved and assigned to order &2 |
| 460 | Please enter an order number |
| 461 | Check print control, return code & |
| 462 | Invalid key - no entry exists in the print log |
| 463 | Issue date must not be in the future |
| 464 | Reference date must not be in the future |
| 465 | Reference date is earlier than notification creation date |
| 466 | Notification completion flagged |
| 467 | Equipment does not exist at date &1 &2 |
| 468 | Notification & does not exist |
| 469 | Please enter valid priority |
| 470 | End date &1 &2 is earlier than start date &3 &4 |
| 471 | Malfunction end &1 &2 h is before malfunction start |
| 472 | Malfunction end is before malfunction start |
| 473 | Desired start &1 &2 is before notification date &3 &4 |
| 474 | Desired end &1 &2 is before notification date &3 &4 |
| 475 | Execution date reset according to priority |
| 476 | Please check length of downtime &1 &2 |
| 477 | Malfunction date entered is in the future |
| 478 | Downtime entered is in the future |
| 479 | Unit entered is not a unit of time |
| 480 | Notification & still being updated |
| 481 | Equipment not installed at the reference time |
| 482 | Equipment at another functional location at the reference time |
| 483 | Please enter a reference time |
| 484 | Priority type not maintained for notification category & |
| 485 | Deleting the notification in transaction call not allowed |
| 486 | The notification is assigned to an order |
| 487 | Default main work center from equipment master record |
| 488 | Default main work center from functional location master record |
| 489 | Malfunction start only allowed until date $ |
| 490 | Malfunction start only allowed from date $ |
| 491 | Malfunction end only allowed to date $ |
| 492 | Malfunction end only allowed from date $ |
| 493 | No notifications exist at the time of order creation |
| 494 | Notification is not yet allocated to an order |
| 495 | Planned end date is before planned start date |
| 496 | Order type with external number assignment not allowed |
| 497 | Please enter company area |
| 498 | Please select activity |
| 499 | Select task |
| 500 | ******* General Notifications *************** |
| 501 | Enter notification number |
| 502 | Notification & does not exist |
| 503 | Transaction & not in the internal control table |
| 504 | Activity category & not allowed |
| 505 | No entries created yet |
| 506 | The number & is outside the valid number interval |
| 507 | Planned task end is after desired notification end |
| 508 | Planned task start is before desired notification start |
| 509 | Planned task start is after desired notification end |
| 510 | Notification has not yet been assigned to a sales order |
| 511 | Time only useful in connection with a date |
| 512 | Planned task end is before desired notification start |
| 513 | Amount returned is greated than amount in complaint |
| 514 | Missing amount &1 may not be greater than reclaimed amount &4 |
| 515 | Return deliv. date only makes sense if amount returned is there |
| 516 | Return delivery date is in the future |
| 517 | Activity start is before desired notification start |
| 518 | Activity start is after desired notification end |
| 519 | Activity end is after desired notification end |
| 520 | Activity end is before desired notification start |
| 521 | Enter plant and corresponding work center |
| 522 | Coding catalog text does not exist |
| 523 | Notification was already assigned to a sales order |
| 524 | Enter at least the task text |
| 525 | Notification &1 and sales order &2 were saved |
| 526 | You are not allowed to delete task & |
| 527 | The item & may not be deleted |
| 528 | No other items available |
| 529 | Indicate sort number |
| 530 | Entries not allowed, check the entries |
| 531 | Incorrect internal qty &1 &4 exceeds incorrect internal qty for hdr: &2 |
| 532 | Incorrect external qty &1 &4 exceeds incorrect external qty for hdr: &2 |
| 533 | Incorrect internal quantity of item &1 is higher (&2 &3) |
| 534 | Incorrect external quantity of item &1 is higher (&2 &3) |
| 535 | Enter at least one cause text |
| 536 | No causes available |
| 537 | Enter at least one activity text |
| 538 | Screen setting for notification type &1 not maintained, copy standard |
| 539 | Screen setting for notification type &1 already maintained |
| 540 | You are not allowed to delete task & |
| 541 | The sort number is not unique |
| 542 | Planned start of the task is the same as the planned end |
| 543 | The unit of measurement &1 is not available |
| 544 | Change of unit of measurement is not allowed |
| 545 | Revision dates do not correspond to notification start/end dates |
| 546 | Notification number &1 item number &2 not available |
| 547 | MEB controlled revisions are not supported by BAPI |
| 548 | Change of a MEB controlled revision not supported by BAPI |
| 550 | Task &1 for notification &2 cannot be changed as already deleted |
| 551 | Activity &1 for notification &2 cannot be changed as already deleted |
| 552 | Item &1 for notification &2 cannot be changed as already deleted |
| 553 | Cause &1 for notif. &2, item &3 cannot be changed as already deleted |
| 554 | Task &1 for notification &2 cannot be changed as already completed |
| 555 | The respective key fields must be specified for deletion |
| 556 | Only one root cause could be assigned to the notification &1 (header) |
| 557 | Only one root cause could be assigned to the notification item &1 (&2) |
| 560 | Credit limit check was not successful! |
| 566 | No PAM notification type could be determined in Customizing |
| 570 | At least one incorrect item exists in the template message |
| 571 | At least one incorrect task exists in the template message |
| 572 | At least one incorrect action exists in the template message |
| 573 | At lesat one incorrect cause exists in the template message |
| 574 | Partner determination procedure and standard role do not match |
| 601 | System: more than 9999 entries in field & |
| 602 | System date proposed as reference date |
| 651 | Value already exists |
| 652 | Notification item &1 not available |
| 653 | Task &1 is not available for notification &2 |
| 654 | Notification item &1 was created |
| 655 | Enter an item number |
| 656 | New cause assigned to notification item &1 |
| 657 | Causes without assigned items exist |
| 660 | Customizing of screen areas is incomplete for notification type &1 |
| 661 | External number & locked by other user |
| 670 | Maintain a screen from the function group XQQM as &1 |
| 671 | The selected distribution for the tab page is not permitted |
| 672 | Screen areas '090'/'100' cannot be used together with '091'/'101' |
| 673 | Not possible to compare the notification and object data |
| 700 | *********** General QM Notification Processing **************_ |
| 701 | & & does not exist (please check your entry) |
| 702 | Enter an object category and processor ID every time |
| 703 | Object & no longer exists in the workflow. |
| 704 | SSYST: Database error in function module WF_COMMIT |
| 705 | Maintain a partner funtion in Customizing for pers. responsible for task |
| 706 | Customer number &1 does not exist |
| 707 | Vendor number &1 does not exist |
| 708 | Partner number &1 does not exist |
| 709 | Organizational unit &1 does not exist |
| 710 | Position &1 does not exist |
| 711 | User &1 does not exist |
| 712 | Personnel number &1 does not exist |
| 713 | The system cannot display any possible entries for this partner function |
| 714 | Date is in the future |
| 715 | No catalog entry could be selected |
| 716 | No individual address created for this notification |
| 717 | Object list editing not possible for order type &1 |
| 718 | Only specify partner function together with partner number |
| 719 | Partner function &1 does not exist |
| 720 | No text can be displayed for the code |
| 721 | Authorization check for business transaction &1 failed |
| 750 | ********************* Notification archiving **************************** |
| 751 | Entry & missing in SAR2 |
| 752 | & |
| 753 | Notification & : System status "Deletion indicator" is set |
| 754 | Notification & : Setting status "Deletion indicator" not allowed |
| 755 | Notification & : There are measurement documents for the notification |
| 756 | Total : Read according to selection conditions : & |
| 757 | Total : Archiving flag set/possible : & |
| 758 | Notification & : Blocked by & |
| 759 | Notification & : Error when blocking notification |
| 760 | Notification & : Archiving flag set/possible |
| 761 | Notification category & is not a standard SAP category |
| 762 | Notification & : PM/SM order & assigned |
| 763 | Notification & : System status "Order assigned" is active |
| 764 | Notification & : No usage found |
| 765 | Notification category & : & |
| 766 | Notification &1 : Corresponding inspection lot &2 has no usage decision |
| 767 | Delete : Key: & |
| 768 | Insert : Key: & |
| 769 | Notification & : Does not meet selection conditions |
| 770 | Notification & was not registered for archive handle & |
| 771 | Read access is not possible for archive handle & |
| 772 | Archive access is not possible for archive handle 0 |
| 773 | Write access is not possible for archive handle & |
| 774 | No selection was made |
| 775 | Notif. & : Sales order & assigned |
| 776 | Notif. & : PM/SM order & is already deleted |
| 777 | Notif. & : Sales order & is already deleted |
| 778 | The order & is already deleted |
| 779 | Notification & is assigned to order & |
| 780 | A sales order is already active in the notification processing |
| 781 | A sales order is already active in the return goods processing |
| 782 | A sales order is already active for advance shipment |
| 783 | A sales order is already active in the creation of a quotation |
| 784 | No advance shipment document found for service order |
| 785 | Decentralized system for distributed plant maintenance => no archiving |
| 786 | Order & is already archived |
| 787 | "Until Measuring Time" is before end of residence time => see long text |
| 788 | A measurement document must be retained per measuring point - set flag |
| 789 | Notification &1 has no change authorization in the current system |
| 790 | No partner function determined for the paging partner |
| 791 | No partner function determined for the paging partner |
| 792 | Notification &: historic maintenance/service order & assigned |
| 793 | Notifcation & : System status "flagged for deletion" has already been set |
| 794 | Notification & : Status "flagged for deletion" is not permitted |
| 795 | Notification &: System status "Mark for deletion" is not set |
| 796 | Notification &: Deletion flag cannot be reset |
| 799 | Notif. &1: Corresponding insp. lot &2 has &3 open long-term char. |
| 800 | Update termination file &, return code &, number & |
| 801 | Update termination during insert QMFE (error item) |
| 802 | Update termination during update QMFE (error item) |
| 803 | Update termination during delete QMFE (error item) |
| 804 | Update termination during insert QMUR (error cause) |
| 805 | Update termination during update QMUR (error cause) |
| 806 | Update termination during delete QMUR (error cause) |
| 807 | Update termination during insert QMMA (activity) |
| 808 | Update termination during update QMMA (activity) |
| 809 | Update termination during delete QMMA (activity) |
| 810 | Update termination during insert QMSM (task) |
| 811 | Update termination during update QMSM (task) |
| 812 | Update termination during delete QMSM (task) |
| 813 | Info structure for equipment & updated |
| 814 | Info structure for funct.location & updated |
| 815 | Warning: Statistics currency changed. Please check long text. |
| 816 | Conversion completed successfully : Client $ Table $ |
| 817 | Conversion faulty : Client $ Table $ |
| 818 | Release / Put change faulty : Client $ Table $_ |
| 819 | SAP standard settings copied for client & table & |
| 820 | Table protocol: & : & |
| 821 | Deletion protocol: & : & |
| 822 | Display function not supported for key figure & |
| 823 | Selection and key figure value may vary |
| 824 | Characteristic delimitation only applies to one functional location |
| 825 | Enter a functional location for characteristic delimitation |
| 826 | No selection was made |
| 827 | Start date / time : & / & |
| 828 | Run name / version : & / & |
| 829 | Event : & / & |
| 830 | From message number : & |
| 831 | Event/Infostructure : & / & |
| 832 | From equipment number : & |
| 833 | From functional location : & |
| 834 | From order : & |
| 835 | Number of messages : & |
| 836 | No. functional locations : & |
| 837 | No. historical orders : & |
| 838 | Number of orders : & |
| 839 | Equipment: & Acquisition value without currency |
| 840 | Equipment: & Acquisition value without acquisition date |
| 841 | Equipment: & No exchange rate of acquisition currency for stat.currency |
| 842 | End date / time : & / & |
| 843 | No. of pieces of equipment . & |
| 844 | Equipment & not available for date & |
| 845 | Entries with version & were deleted from info structures |
| 846 | The report was replaced by report RIPMS001 from Release 30C |
| 847 | Enter one functional location only |
| 848 | Number of places selected too high, please reduce the selection |
| 849 | Info structure & is not defined for the application PM/SM |
| 850 | No info structures were selected |
| 851 | Info structure &1: Updating not active |
| 852 | Info structure &1: Updating active |
| 853 | Reorganization for equipments from creation date: & |
| 854 | Reoganization for functional locations from creation date: & |
| 855 | Reorganization for notifications from creation date: & |
| 856 | Reorganization for orders from creation date: & |
| 857 | From measurment document: & |
| 858 | New structure for measurement documents from creation date: & |
| 859 | Number of measurement documents: & |
| 860 | Notification was created before time zone functionality was activated |
| 870 | No capacity category was maintained in the BAdI; Calculation not possible |
| 871 | BAdI implementation &1 does not exist |
| 872 | No capacities maintained for work center &1 plant &2 |
| 873 | Notification &1 uses same shift as notif. &2. Notif. &1 is ignored |
| 880 | Tasks defined externally are not supported with the Copy function |
| 881 | Activities defined externally are not supported with Copy function |
| 882 | Defect causes defined externally are not supported with Copy function |
| 883 | Defect items defined externally are not supported with Copy function |
| 884 | Header information defined externally is not supported with Copy function |
| 885 | Partners defined externally are not supported with Copy function |
| 886 | The final due date must be on or after the start date. |
| 887 | The final due date must be on or after the end date. |
| 898 | Function code can only be assigned if extension & is active |
| 899 | Material &1 is not the same as the material in order &2 |
| 910 | *Archiving notifications |
| 911 | Notification &1 is MEB controlled -> archiving is currently not permitted |
| 912 | Notification &1 archived -> use display transaction |
| 913 | Message &1 already archived |