IR - PM: IMRC - Measurement Readings and Counters
The following messages are stored in message class IR: PM: IMRC - Measurement Readings and Counters.
It is part of development package IMRC in software component PM-EQM-SF-MPC. This development package consists of objects that can be grouped under "Application Development R/3 Measurement Readings & Counters".
It is part of development package IMRC in software component PM-EQM-SF-MPC. This development package consists of objects that can be grouped under "Application Development R/3 Measurement Readings & Counters".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Measuring point &2 is currently locked by user &1 |
| 001 | Measuring point & does not exist |
| 002 | No measuring points have been defined for this object |
| 003 | Measuring point being processed by user & -> only display possible |
| 004 | Lock management not available -> only display possible |
| 005 | Measuring points not ready for entry are being edited elsewhere |
| 006 | & measuring points are being processed elsewhere and cannot be deleted |
| 007 | MeasPoint & currently locked -> document processing not possible |
| 008 | MeasPoint &1 does not belong to &2 &3 |
| 009 | & MeasPoints will not be deleted as MeasDocuments already exist |
| 010 | Reference measuring point & does not exist |
| 011 | & MeasPoints will not be deleted: still in use in maintenance plans |
| 012 | MeasPoint & is not a reference MeasPoint |
| 013 | MeasDocument is being processed by user & -> only display possible |
| 014 | MeasPoint inactive: entry of new MeasDocs not possible |
| 015 | You cannot copy from a reference measuring point |
| 016 | Enter a copy reference or a reference measuring point |
| 017 | No change authorization -> only display possible |
| 018 | & MeasDocs cannot be deleted as they already exist in the database |
| 019 | No measurement documents entered |
| 020 | Measurement document & does not exist |
| 021 | Measuring point & has no measurement documents |
| 022 | The year figure in the date is too large (typing error?) |
| 023 | Measurement time cannot be in the future |
| 024 | A positive value must be entered for the counter reading difference |
| 025 | Counter reading must be less than the counter overflow reading |
| 026 | The counter reading must be a positive value (or zero) |
| 027 | Document & already entered for the measurement time specified |
| 028 | Counter reading same as in the previous document & |
| 029 | Enter counter reading or counter reading difference |
| 030 | Measuring point category & not defined |
| 031 | Enter measuring point category |
| 032 | Counter reading smaller than in previous document & |
| 033 | Counter reading larger than in previous document & |
| 034 | Measuring point is used in maintenance plan scheduling |
| 035 | MeasPoint & does not have a MeasDoc. older than the current one |
| 036 | The counter reading entered will lead to a counter overflow |
| 037 | Document & already entered for the measurement time specified |
| 038 | No measurement documents have been entered before &1 &2 |
| 039 | No measurement document exists at measuring point &3 for &1, &2 |
| 040 | Only characteristics with a numerical format can be used |
| 041 | New charact. has diff. dimension -> dependent fields will be initialized |
| 042 | Only characteristics with a unit of measurement can be used |
| 043 | Enter a numerical characteristic before entering a number |
| 044 | Enter a unit of measurement |
| 045 | Assign a characteristic and/or a code group |
| 046 | You must allocate a numerical characteristic for counters |
| 047 | MeasPoint &1 was allocated characteristic w. internal no. &2 |
| 048 | Dec. places and exp. f. float. point display copied from characteristic |
| 049 | Characteristic not allowed: different dimension |
| 050 | Only positive values are allowed for the overflow reading |
| 051 | Target value outside measurement range limits |
| 052 | Upper meas. range limit must be greater than lower meas. range limit |
| 053 | Measurement reading outside the measurement range limits |
| 054 | MeasPoint &1: counter reading falls above maximum total counter reading |
| 055 | MeasPoint &1: counter reading falls below minimum total counter reading |
| 056 | Characteristic does not allow a negative valuation |
| 057 | Conversion of MeasPoint & to a counter (or other way round) not possible |
| 058 | Changing the counter direction is no longer possible |
| 059 | The counter must run forwards for interval documents |
| 060 | Measuring point category & is not allocated a catalog type |
| 061 | Object category not allowed for measuring point objects |
| 062 | Enter a measuring point object |
| 063 | & measurement points not deleted: still used as PRT in order |
| 064 | & measurement points not deleted: still used as PRT in task list |
| 065 | &1 measuring points not deleted, as they have already been distributed |
| 066 | Measuring point &1 has no change authorization in this system |
| 067 | Reversal reset not possible, Measurement Document & was not reversed |
| 068 | Enter the correct processing status. |
| 069 | Enter a valid transfer mode. |
| 070 | MeasRange unit has a different dimension to the characteristic unit |
| 071 | Document MeasUnit has a different dimension to the characteristic unit |
| 072 | Characterisic unit has no dimension -> different unit not allowed |
| 073 | MeasReading transfer: Measuring points have deviating characteristics |
| 074 | Enter a source measuring point. |
| 075 | Enter a target measuring point. |
| 076 | Enter a valid start date. |
| 077 | Enter a valid end date. |
| 078 | Enter a valid start time. |
| 079 | Enter a valid end time. |
| 080 | Not all MeasPoints can be displayed because of a lack of authorization |
| 081 | You do not have authorization to display all the measurement documents |
| 082 | You do not have change authorization for MeasPoint & |
| 083 | You do not have change authorization for MeasDoc. & |
| 084 | MeasPoints incomplete: no authorization for creation of MeasDocs |
| 085 | No Failed measurement readings for the provided date and time. |
| 086 | Enter a counter reading for Counter Replacement. |
| 090 | Maintain the code group for MeasPoint & |
| 091 | Enter a measurement reading |
| 092 | Enter a measurement reading or a valuation code |
| 093 | No code group defined for measuring point &. -> Valuation not possible |
| 094 | Enter either a counter reading or a counter reading difference |
| 095 | Measuring point &1 is not a counter |
| 096 | Meas. doc. &1 cannot be changed at present, as meas. point &2 is locked |
| 097 | Code catalog does not fit |
| 098 | Code group does not fit |
| 100 | Characteristic &1 can only be used for results transfer from QM |
| 101 | Measuring point &1 does not allow direct entry of measurement documents |
| 102 | The maximum number of measurement documents has been reached |
| 110 | & measuring points created |
| 111 | & measuring points changed |
| 112 | & measuring points deleted |
| 113 | & measuring points created/changed/deleted |
| 114 | &1 MeasPoints and &2 MeasDocuments created/change/deleted |
| 115 | Changes were saved |
| 116 | & measurement documents created |
| 117 | & measurement documents changed |
| 118 | & measurement documents deleted |
| 119 | & measurement documents created/changed |
| 120 | Measuring point & created |
| 121 | Measuring point & changed |
| 122 | Measuring point & deleted |
| 126 | Measurement document & created |
| 127 | Measurement document & changed |
| 128 | Measurement document deleted |
| 129 | Database update failed |
| 130 | & measuring points copied from the copy reference |
| 135 | No measuring points have been selected |
| 140 | Measurement position is not unique -> see long text |
| 141 | Several measuring points with measurement position & |
| 142 | No measuring points with measuring position & |
| 143 | MeasDocs have already been entered for the order operation |
| 144 | MeasPoint is a counter -> check maintenance plan scheduling data |
| 145 | Caution! - &1 subsequent documents have already been created |
| 146 | &2 subsequent MeasDocs were changed for MeasPoint &1 |
| 147 | MeasDoc. & has lead to measurement readings being copied |
| 148 | Measuring point &2 locked by user &1 -> Structure changes not possible |
| 149 | Measurement reading transfer stopped for &1 measuring points |
| 150 | Measuring point &2 cannot be forwarded to meas. point &1 (recursiveness) |
| 151 | Transfer measurement readings to a measuring point of the same object? |
| 152 | MeasPoint has different characacter -> MeasReading transfer not possible |
| 153 | MeasPoint &1 is not a counter. MeasPoint &2 is a counter |
| 154 | MeasPoint &1 is a counter. MeasPoint &2 is not a counter |
| 155 | Measurement reading transfer is defined for the measuring point |
| 156 | Measurement reading transfer to object & |
| 157 | Measurement reading transfer in the sub-structure of object & |
| 158 | Measurement reading transfer to object & and in its sub-structure |
| 159 | Measurement reading transfer usually only within object hierarchies |
| 160 | MeasReading copied from MeasPoint &1 to &2 MeasPoints |
| 161 | Copying of MeasReadings incomplete: & MeasPoints locked |
| 162 | Measuring point &2 locked by user &1 -> Measurement readings not copied |
| 163 | MeasDoc. & has not led to a measurement readings being copied |
| 164 | Measurement reading transfer for measuring point & defined recursively |
| 165 | Measurement reading transfer defined for measuring point & |
| 166 | Measurement reading transfer not possible owing to different dimension |
| 167 | MeasReadings will be copied to the MeasPoints listed when you save |
| 168 | No measurement readings need to be copied |
| 169 | Measurement reading transfers still to be taken up for meas. point &1 |
| 170 | MeasDoc. & no longer corresponds w. MeasPoint definition (see long text) |
| 171 | Counter reading in doc. &1 larger than in subsequent doc. &2 |
| 172 | Counter reading in doc. &1 smaller than in subsequent doc. &2 |
| 173 | Enter a substitute document for measurement document &1 |
| 174 | &1 measurement documents canceled, &3 measurement documents changed |
| 175 | All transfers successfully taken up |
| 176 | The remaining entries should be processed manually |
| 177 | Only take up transfer from measurement document &1 |
| 178 | There are measurement reading transfers to be taken up again |
| 179 | Conflict of document &1 with meas. point &2 for meas. reading transfer |
| 180 | No referfence MeasPoint defined -> data cannot originate from there |
| 181 | Data was copied from the reference measuring point |
| 182 | Data was copied from the new reference measuring point |
| 183 | Equipment MeasPoints can only refer to construction type RefMeasPoints |
| 184 | Reference MeasPoint does not come from the construction type allocated |
| 185 | The reference MeasPoint does not come from the RefLocation assigned |
| 186 | RefMeasPoint has a different dimension -> assignment not possible |
| 200 | No transfer of measurement/counter readings was defined |
| 201 | Transfer of measurement readings defined for &1 measuring points |
| 202 | Flag only one measuring point per block |
| 203 | Measuring point &1 locked -> Measurement reading transfer not defined |
| 204 | No defaults could be determined for measurement reading transfer |
| 205 | Another measurement reading transfer is defined for measuring point &1 |
| 206 | don't translate! (message was new with 4.6A, is obsolete with 4.6C) |
| 207 | Measuring point &1 is marked for deletion |
| 208 | The validity period cannot be negative |
| 209 | The reference time cannot lie in the future |
| 210 | Warnings exist (-> see log) |
| 211 | Error messages exist (-> see log) |
| 212 | Further measuring points exist |
| 213 | "From date" must not be later than "To date" |
| 214 | "Valid from" = "Valid to" -> Transfer dependency canceled! |
| 215 | Validity end date must not lie in the future |
| 216 | No measurement reading transfer dependencies were selected |
| 217 | "Valid to" entry not possible due to conflict |
| 218 | "Valid from" must be earlier than "Valid to" date |
| 219 | Date lies before &1 -> Please check |
| 220 | &1 measuring points not deleted: Measurement reading transfer defined |
| 221 | No valid measurement reading transfer relationship exists on &1 at &2 |
| 222 | Measurement reading transfer is still active |
| 230 | &1 measurement reading transfers taken up |
| 250 | Measurement document &1 is not an interval document |
| 251 | Interval documents cannot be canceled manually |
| 252 | Measurement document &1 canceled |
| 253 | Reset reversal not possible owing to &1 dependent interval documents |
| 254 | Interval documents are already available |
| 255 | Interval document &1 cannot be split |
| 256 | Conflict with source document for interval document &1 |
| 257 | &1 interval documents split |
| 258 | Interval documents are not supported in this client |
| 259 | Some measurement points are already configured to interval documents |
| 300 | Measuring point & is inactive |
| 301 | Column cannot be sorted |
| 302 | Enter a measurement reading entry list number |
| 303 | Name of the entry list must contain at least one letter |
| 310 | Measurement reading entry list & saved |
| 311 | Measurement reading entry list & does not exist |
| 312 | Measurement reading entry list & does not yet contain any entries |
| 313 | Measurement reading entry list & does not contain any usable entries |
| 314 | The name & is not unique for a measurement reading entry list |
| 315 | No measurement reading entry list exists with the name & |
| 401 | Counter overflow reading is less than counter reading in meas. doc. &1 |
| 500 | Object type is not permitted for reference measuring point objects |
| 501 | Reference measuring point &1 is not available |
| 502 | Warning - You are undoing the assignment to the reference measuring point |
| 503 | Warning - Data is copied from the new reference measuring point |
| 504 | Measuring point &1 is not available; it is a reference measuring point |
| 505 | RMP &1 cannot be deleted; dependent meas. points are being processed. |
| 506 | &1 reference measuring points were changed |
| 507 | &1 measuring points were changed, &2 added, &3 deleted |
| 508 | Measuring point & is a reference measuring point |
| 509 | Note - You are changing the assignment to the reference meas. point |
| 510 | & Ref.Meas.Pt was not deleted. There are meas.docs at dependent meas.pts. |
| 511 | &1 is a measuring point,not a reference measuring point |
| 512 | & is a reference measuring point, not a measuring point |
| 515 | Reference measuring point & not deleted - already distributed |
| 516 | Measurement transfers come from higher-level measuring point objects |
| 517 | Measurement transfers come from lower-level measuring point objects |
| 518 | Measurement transfers from meas.pt objects outside direct hierarchy line |
| 519 | Measurement transfer for ref. meas. points only inside the object hierary |
| 520 | Measurement transfer only allowed within same meas. point object types |
| 526 | User &1 is currently editing reference meas. point &2 |
| 530 | Reformatting bears risk of data loss in target limits; see long text |
| 600 | Inspection Lot Origin is not valid for Plant Maintenance. |
| 601 | Inspection Point Type is not valid for Measurement Document. |
| 602 | Meas. Point Object does not match with Ins. Point Equipment |
| 603 | Meas. Point Object does not match with Ins. Point Functional Location |
| 666 | Not all meas.points from the meas. reading transfer could be determined |
| 700 | Program &1 started: &2 &3 |
| 701 | Program &1 ended: &2 &3 |
| 702 | Statistics: |
| 703 | Number of selected measuring points: & |
| 704 | Number of selected measurement documents: & |
| 705 | Deletion indicator set/possible for & measurement document(s) |
| 706 | Number range IMRG is in the critical area |
| 710 | => Processing terminated |
| 711 | No database delimitation performed (selection options are blank) |
| 712 | Selection conditions (selection options) are too complex |
| 714 | Counter type for measurement position does not exist in table T370POS |
| 715 | Insufficient meas. docs available for measuring point &1 in long periods |
| 716 | No measurement position &2 exists for object &1 |
| 717 | Insufficient meas. docs available for measuring point &1 in short periods |
| 718 | No long period maintained for costing procedure &1 |
| 719 | No short period maintained for costing procedure &1 |
| 750 | Incorrect interface use: & & & & |
| 751 | API only supports measurement reading transfer within meas. point object |
| 752 | Incorrect measurement reading transfer &1 |
| 753 | No measuring point is specified for the measurement reading transfer |
| 754 | Interval documents can only be created for counters |
| 755 | Value of parameter & cannot be converted |
| 756 | Measuring point &1 was already active |
| 757 | Measuring point &1 was already inactive |
| 758 | Measuring point &1 activated |
| 759 | Measuring point &1 deactivated |
| 760 | Dimension of characteristic and additional counter unit not convertible |
| 761 | Measuring point &1 not defined for this measurement reading transfer |
| 762 | No measurement reading transfer with interval documents (Customizing) |
| 763 | Test to create measuring point/measurement documents completed |
| 764 | A measurement document was already entered for the measurement time |
| 801 | DFPS: No DFPS change authorization found in system for measuring point &1 |
| 897 | Internal error in function module & |
| 898 | Internal Error in Form update_imrg_buf. |
| 899 | Internal tables IMRG_BUF and IMRG_BUF_POINT are not the same |
| 901 | Validation error no. &1 at point &2 measurement document &3 |