K7 - Nachrichten zur Zeilen-/Spaltenstruktur
The following messages are stored in message class K7: Nachrichten zur Zeilen-/Spaltenstruktur.
It is part of development package KE in software component CO-PA. This development package consists of objects that can be grouped under "Profitability Analysis".
It is part of development package KE in software component CO-PA. This development package consists of objects that can be grouped under "Profitability Analysis".
Message Nr ▲ | Message Text |
|---|---|
| 000 | * |
| 001 | An initial value is not permitted for key figures |
| 002 | CO Form: lead columns and variables were converted |
| 003 | Structure cannot be deleted, because it is used in report & |
| 004 | CO Form: Text variables were converted |
| 005 | Entry & could not be converted into internal format |
| 006 | Variable name must begin with '&' |
| 007 | Variable name cannot begin with a number |
| 008 | Assign a field name to the characteristic variable |
| 009 | Replacement type 1 is not supported for variables for charact. values |
| 010 | Characteristic variables are not supported |
| 011 | Enter a text length |
| 012 | Enter a source field for replacement type 1 |
| 013 | Enter a from/to indicator for replacement type 1 |
| 014 | Enter a characteristic value/text indicator for replacement type 1 |
| 015 | Enter the offset and length for replacement type 1 |
| 016 | Replace with a fixed value |
| 017 | Do not make entry optional for this replacement type |
| 018 | Do not enter a source field for this replacement type. |
| 019 | Do not enter a from/to indicator for this replacement type. |
| 020 | Do not mark char. value/text indicator for this replacement type |
| 021 | Do not enter offset and length for this replacement type |
| 022 | Enter a variable type |
| 023 | Enter a replacement type |
| 024 | Enter a variable name |
| 025 | The second character of the variable name is not allowed |
| 026 | Number variables may not be longer than 9 characters |
| 027 | The variable name may not contain '+' or '-' |
| 028 | Delete field & before deleting field & |
| 029 | For field &, there is no set & |
| 030 | Enter a medium-length text |
| 031 | There is no global variable "&2" for field "&1" |
| 032 | Interval may only contain either standard periods or special periods |
| 033 | Dependent report & exists --> cannot delete |
| 034 | Enter a description for the variable |
| 035 | Row & is not displayed |
| 036 | Column & is not displayed |
| 037 | All formattings were reset for the selected area |
| 038 | The color setting was changed for the selected area |
| 039 | The number format was changed for the selected area |
| 040 | The type of indenting was changed for the selected area |
| 041 | The formatting was changed for the selected area |
| 042 | Signs are reversed for the selected area |
| 043 | Signs are not reversed for the selected area |
| 044 | The text direction was changed to & |
| 045 | Formatting mode was deactivated |
| 046 | Formatting mode was activated |
| 047 | Ragged margin activated (rows are left-justified) |
| 048 | Ragged marging deactivated (row text is left-justified) |
| 049 | No further processing without a version |
| 050 | Position the cursor on a valid row |
| 051 | Selected row does not contain characteristics which can be broken down |
| 052 | Level of detail in report was changed |
| 053 | Enter a number |
| 054 | Report cannot be executed, because it was not saved beforehand |
| 055 | Explicit selections are only possible on the lowest level |
| 056 | You cannot delete the lead column at the lowest level |
| 057 | This element cannot be defined for manual entry |
| 058 | No data can be entered manually in the selected area |
| 059 | Data can be entered manually in the selected area |
| 060 | Enter a single value for this characteristic |
| 061 | Enter an interval for this characteristic |
| 062 | Enter single values for this characteristic |
| 063 | You cannot use an inverse formula for a field set for manual entry |
| 064 | The variable name must contain at least two characters. |
| 065 | The variable name may only contain letters, numbers and underscores |
| 066 | An inverse formula is not allowed for elements with normal formulas |
| 067 | The field's entry status was not changed |
| 068 | Structure was converted |
| 069 | Do not use system variables as variables for characteristic values |
| 070 | The variable name may not contain spaces |
| 071 | The sign must be followed by a number |
| 072 | Name entered is already reserved (do not enter leading zeroes) |
| 073 | You cannot change the selected object |
| 074 | Use a variable with a different replacement type |
| 075 | You cannot enter "#" here |
| 076 | You cannot enter "*" here |
| 077 | Settings for the drill-down list were saved |
| 078 | Select the rows and columns for the drill-down list |
| 079 | You have not selected any rows for the drill-down list |
| 080 | You have not selected any columns for the drill-down list |
| 081 | You have not selected any rows for the drill-down printout |
| 082 | You have not selected any columns for the drill-down printout |
| 083 | Enter a single value other than the initial value |
| 084 | Hierarchy variables are not supported |
| 085 | Enter an interval without the initial value |
| 086 | Choice of elements for the drill-down list was reversed |
| 087 | Choice of elements for the background drill-down list was reversed |
| 088 | Use local variables only |
| 089 | Local variables are not supported -> use global variables |
| 090 | No operators are allowed for variable "&" |
| 091 | Variable name can only contain letters and numbers |
| 092 | &1 "&2" being deleted from the form |
| 093 | To adopt changes, you need to save the form |
| 101 | Identify one element as a weight |
| 102 | Identify one element as a search ratio |
| 103 | Element & is identified as a weight |
| 104 | Element & is identified as a search ratio |
| 105 | Copying was not completed |
| 106 | Error occurred during copying. Copy terminated before completion |
| 107 | The data was copied |
| 108 | You cannot call up a where-used list from here |
| 109 | You can only call up a where-used list from the overview list |
| 110 | No errors were found |
| 111 | Choose another name (name is in reserved range) |
| 112 | Choose another name (no special characters) |
| 113 | Select at least one row |
| 114 | Select at least one column |
| 115 | Please maintain variable & |
| 116 | This function is only supported at the highest level |
| 117 | Position the cursor on an element which can be formatted |
| 118 | Function terminated - no pre-defined elements exist |
| 119 | Replacement type 4 is not supported in the customer system |
| 120 | Form & is not used in a report |
| 121 | Strikethrough or underscore was changed |
| 122 | The last action was reversed because side margins was exceeded |
| 123 | The action was terminated |
| 124 | Line item layout can only be used for costing-based CO-PA |
| 125 | Inverse formula was deleted |
| 126 | Inverse formula does not exists or could not be deleted |
| 127 | All the inverse formulas were deleted |
| 128 | No inverse formulas exist |
| 129 | All inverse formulas were generated automatically |
| 130 | User & is already processing & & |
| 131 | Element & is not found using an inverse formula |
| 132 | & does not exist and therefore cannot be inserted |
| 133 | Inverse formula is not possible for an element which has not been defined |
| 134 | No general data selection has been defined |
| 135 | Header was changed |
| 136 | Function terminated |
| 137 | New lead column added, please define ("Define element") |
| 138 | Report & is still used in a report group |
| 139 | Segment & was deleted |
| 140 | Transaction terminated because cells cannot be deleted in this row |
| 141 | The selected cell is not allowed |
| 142 | Special cell definition was reversed |
| 143 | Make your selection in the column display |
| 144 | Make your selection for the drilldown list |
| 145 | Make your selection in the row display |
| 146 | Already expanded or collapsed completely |
| 147 | No model was found |
| 148 | Maintain the layout of the drilldown list |
| 149 | You have reached the last column |
| 150 | You have reached the first column |
| 151 | Too many columns --> layout will not be displayed completely |
| 152 | Entries at the 0-asterisk level only appear when you execute the report |
| 153 | Already expanded to the 0-asterisk level |
| 154 | Already collapsed to the &-asterisk level |
| 155 | Inverse formula is only allowed for elements with selection by charact. |
| 156 | Documentation will not be copied |
| 157 | Selection options are not available for field & |
| 158 | It is not possible to change the +/- sign for calculated key figures |
| 159 | Deletion is not possible, as the formula is still in use. |
| 160 | Not all inverse formulas could be generated automatically |
| 161 | No inverse formula could be generated automatically |
| 162 | Variable &1 is only allowed for Table &2 and field &3 |
| 163 | Form type was copied with form & |
| 164 | Key figure selection limited due to dependent characteristics |
| 165 | Zeroes are hidden |
| 166 | Zeroes are displayed |
| 167 | You must make element & a mandatory entry |
| 168 | Status of variables automatically set to "Entry required" |
| 169 | Characteristic selection limited due to dependent key figures |
| 170 | No pre-defined column exists |
| 171 | & is not used |
| 172 | Form & contains a formula which cannot be used |
| 173 | No cells are selected for processing |
| 174 | Position the cursor on the column header first |
| 175 | Make an entry in the field "Currency", and leave the field "Unit" blank |
| 176 | Leave the field "Currency" blank |
| 177 | Make an entry in the field "Currency" |
| 178 | Leave the fields "Currency" and "Unit" blank |
| 179 | Text variable &1 had to be truncated |
| 180 | Text variable &1 has an invalid replacement rule |
| 181 | The system cannot process more than 99 single values per characteristic |
| 182 | Only the first page is displayed in the report |
| 183 | Cells in exploded rows cannot be selected |
| 184 | Text variables are not allowed texts for formula elements |
| 185 | You cannot delete an element that you selected for the drill-down list |
| 186 | You cannot hide an element that you selected for the drill-down list |
| 187 | No key figure scheme exists |
| 188 | Value cannot be broken down because it is used in formula & |
| 189 | Value cannot be broken down because a cell has been selected |
| 190 | Aspect & does not allow a data area |
| 191 | No languages exist, table T002 is empty |
| 192 | You do not have authorization to create |
| 193 | You do not have authorization to change |
| 194 | You do not have authorization to display |
| 195 | The first section cannot be deleted -> if necessary, change sort order |
| 196 | Field name & does not exist -> enter a valid field name |
| 197 | Maintain the first lead column before adding another |
| 198 | This element cannot be hidden |
| 199 | Repl. type "reference" is only allowed for variable type "Hierarchy" |
| 200 | Repl. type "GPA" is only allowed for variable type "Characteristic value" |
| 201 | Row cannot be copied before a text row |
| 202 | Character string "&" not found |
| 203 | Where-used list for variable &1 is not entirely possible |
| 204 | The controlling area must be unique for SET hierarchy nodes |
| 205 | Replacement type "Automatic" not permitted for variable type "Hierarchy" |
| 206 | Replacement type "Automatic" not permitted for variable type "Hier. node" |
| 207 | Variable &1 is already used. Choose another name |
| 208 | Variable &1 does not exist. Enter another name |
| 209 | Variables &1 and &2 must have the same variable type |
| 210 | The possible entries function is not available for this variable type |
| 211 | Variable &1 is already used. Choose a different name |
| 212 | Replacement type "Automatic" not permitted for var. type "CharVal/H.node" |
| 220 | Optional variables and select options may not be used here |
| 221 | Optional variables cannot be used here |
| 222 | You need to assign a field name to variables for hier.nodes/char. values |
| 223 | You need to assign a field name to the variables for the hierarchy |
| 224 | You need to assign a field name to the variables for the hierarchy |
| 225 | Fixed value "&1" is not permitted for field name "&2" |
| 226 | The fixed value &1 might not be permitted for field name &2 |