LB - Logistics: Batch - Management
The following messages are stored in message class LB: Logistics: Batch - Management.
It is part of development package VB in software component LO-BM. This development package consists of objects that can be grouped under "Batch Management".
It is part of development package VB in software component LO-BM. This development package consists of objects that can be grouped under "Batch Management".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ****** Messages from Logistics - Batches ***** |
| 001 | Shortfall below avail.qty for batch & in storage loc.& amounting to & & |
| 002 | Batch & does not exist for material & in plant & |
| 003 | This batch determination is only possible for unit of measure & |
| 004 | Search strategy & does not exist |
| 005 | Entry quantity & is not equal to storage quantity & for the same UoM & |
| 006 | The number of batch splits is limited to & |
| 007 | Strategy contains no selection specifications |
| 008 | Batch determination without selection specifs already been carried out |
| 009 | No selection criteria could be determined |
| 010 | Batch determination was carried out without selection specifs |
| 011 | Initial situation restored |
| 012 | Number of batch splits has been increased to & |
| 013 | Sorting was carried out according to sort rule & |
| 014 | No search strategy could be found |
| 015 | No quantity proposal rule was specified |
| 016 | Availability cannot be displayed because of missing checking rule |
| 017 | Unit of entry is equivalent to stockkeeping unit |
| 018 | Last explosion level reached |
| 019 | First explosion level reached |
| 020 | The total split quantity is greater than the requirement quantity |
| 021 | The selection criteria from the strategy record have been overwritten |
| 022 | No object was transferred for the modified selection criteria |
| 023 | No batch class could be determined for material & |
| 024 | The selection criteria have not been changed |
| 025 | No batches/stocks were found - (Batch) determination is performed online |
| 026 | No batch numbers could be determined |
| 027 | Automatic batch number assignment terminated |
| 028 | Number range & not found for object & |
| 029 | Automatic batch number assignment is inactive or not allowed |
| 030 | Please note that a number range interval must be defined |
| 031 | Of the required quantity of material &, & & remain(s) open |
| 032 | Please note that conversion cannot be carried out back to plant level |
| 033 | The batch search strategy has been changed |
| 034 | Quantity of batch & is reduced to & & as split qty > req. qty |
| 035 | Error in EXIT_SAPMM07_004: object '&', char. '&', value '&', error '&' |
| 036 | Batch & is not allowed acc. to customer specifs |
| 037 | Batch number & is not in external number range & |
| 038 | 'Overdelivery allowed' was set from the current application |
| 039 | Selection criteria cannot be changed in acc. with strat. record |
| 040 | No selection at the start of batch determination in acc. with strat. rec. |
| 041 | Error when checking batch & with the external number range |
| 042 | Error when checking batch & with customer selection criteria |
| 043 | Selection criteria from the configuration were not transferred |
| 044 | The external selection specifications have been deleted in the meantime |
| 045 | The characteristic values for the batch are incomplete |
| 046 | The available quantity of batch & was corrected to & & |
| 047 | Selection class & does not contain any selection criteria |
| 048 | Selection criteria transferred from the material classification |
| 049 | Batches could not be determined => no entry made for plant |
| 050 | Batches could not be checked => no entry made for plant |
| 051 | Invalid batch according to selection criteria in batch determination |
| 052 | Selection class &1 does not exist. Check strategy type &2 (&3) |
| 053 | Sort rule &1 does not exist. Check strategy type &2 (&3) |
| 054 | No sort characteristics exist for sort rule &1 |
| 055 | Please use transaction OMCT |
| 056 | Stock determination/batch determination not possible |
| 057 | Batch determination was carried out without BAdI preselection |
| 058 | Batch determination was already done without BAdI preselection |
| 059 | Error when mixing configuration and selection criteria |
| 060 | Batch & transmitted more than once cannot be summarized |
| 061 | Characteristic value of a master inspection charact. cannot be changed |
| 062 | You are not authorized to select in selection class &1 for material &2 |
| 063 | Batch determination quantity proposal was terminated |
| 070 | *** Messages for maintaining proportion/product units |
| 071 | Base unit of measure or prop./prod. unit for material & is not defined |
| 072 | No prop./prod. unit is assigned to material & for characteristic & |
| 073 | Change in standard price (neutral) from & & to & & |
| 074 | Change in price estimated at standard costs (neutral) from & & to & & |
| 075 | Current standard price (neutral) & & is no longer valid (& &) |
| 076 | Curr. price estimated at stand. costs (neutral) & & no longer valid (& &) |
| 077 | Material doc. & for correcting purch. ord. history & & / batch & posted |
| 078 | Material doc. & for correcting purch. ord. history for insp. lot & posted |
| 079 | No correction in purchase order history & & required for batch & |
| 080 | No correction in purchase order history required for inspection lot & |
| 081 | No classif. maintenance for batches that have been assigned char. values |
| 082 | You are mixing valuation types! Batch & has valuation type & |
| 083 | Proportion valuation & for material & deleted in valuation area & |
| 084 | Proportion valuation & for material & saved in valuation area & |
| 085 | Characteristic value & for material & & is not available |
| 086 | Char. value for material & & already exists -> continue with change |
| 087 | Prop./prod. unit valuation only poss. in valuation for a single batch |
| 088 | Unit of measure & of material & is not supported for the valuation |
| 089 | Prop./prod. unit valuation only when valuation area = plant |
| 090 | Ref. material base UoM differs => units of measure not transferred |
| 091 | Units of measure transferred from the reference material |
| 092 | Different 'use of units of measure' key in reference material |
| 093 | Error has occured in revaluing the batch in company code & |
| 094 | Document & is posted in company code & for batch revaluation |
| 095 | You have already marked unit of measure & as relevant for char. val. ass. |
| 096 | There is already a valuation price for char. & and unit of meas. & |
| 097 | No char. values have been assigned to unit of meas. & and material & |
| 098 | The 'batch-specific units of measure' function is not active |
| 099 | Error & in specifying price of proportion/product unit |
| 100 | Base unit of measure & cannot be changed as prop./prod. unit available |
| 101 | For material & there are no allowed characteristics for batch class & |
| 102 | You can only maintain units of measure after allocating the batch class |
| 103 | Please maintain the 'Use of UoM' key for material &1 |
| 104 | The use of units of measure for material &1 cannot be changed |
| 105 | Characteristic & is invalid; your entries are being reset |
| 106 | You have already assigned unit of measure & to characteristic & |
| 107 | The units of measure are not sorted consecutively |
| 108 | Maintain sort & & |
| 109 | Planned value & is not allowed for characteristic & |
| 110 | Planned value & cannot be displayed as numer./denom. (proposal: &) |
| 111 | Please save your changes before you maintain further units of measure |
| 112 | Assign batch class &2 to material &1 |
| 113 | The batch class of material & was changed from & to & |
| 114 | You cannot delete proportion or product unit & here |
| 115 | Scheduling of changes for proportion/product units is not supported |
| 116 | Please first maintain the base unit of measure for material & |
| 117 | Characteristic & is no longer valid => & |
| 118 | All values in accordance with template & are allowed for characteristic & |
| 119 | Value for characteristic & changed to material => & |
| 120 | Planned value & for UoM & is not stored as char. value for char. & |
| 121 | Planned val. ( & ) and numer./denom. convers.( & & ) differ for char. & |
| 122 | Proportion or product unit & may not belong to any dimension |
| 123 | Characteristic & cannot be used for proportion or product units |
| 124 | An error occured when saving planned value as characteristic value |
| 125 | Please check conversion of UoM & to base UoM & for unit of measurement & |
| 126 | Unit of measurement & is not allowed for characteristic & |
| 127 | A proportion/product unit is not yet assigned to the characteristic & |
| 128 | Material & does not need to be handled in batches in any plant |
| 129 | Value &1 for characteristic &2 cannot be stored as numerator/denominator |
| 130 | Material & does not need to be handled in batches |
| 131 | You have already assigned unit of measure & to characteristic & |
| 132 | Alternative UoM & already defined is being assigned to characteristic & |
| 133 | Inconsistent planned value for characteristic & => & |
| 134 | You cannot maintain any proportion units/product units for variants |
| 135 | Unit of measurement & of char. & is not possible for prop./prod. unit |
| 136 | Unit of measure & may not be used as proportion/product unit |
| 137 | No conversion of UoM & to base UoM & defined for unit of measurement & |
| 138 | Plan value &1 for characteristic &2 cannot be deleted |
| 139 | No characteristics of batch class & fulfil the format requirements |
| 140 | No characteristic of batch class & has organizational area '&' |
| 141 | Proportion or product unit & is being used in bills of material |
| 142 | Object table MARM_WS is not defined in the classification system |
| 143 | Batch class & of material & is already being edited |
| 144 | It is not possible to maintain prop./prod. units for material & |
| 145 | You have already marked unit of measure & as leading unit of measure |
| 146 | Please check the inventory correction factor at storage location level |
| 147 | Inventory corr. factors at storage loc. level are maintained for char. & |
| 148 | The proportion unit or product unit must be different to base UoM &1 |
| 149 | Please place the cursor on a valid entry |
| 150 | *** Messages for Customizing proportion units/product units |
| 151 | The proportion/product unit & is assigned to a dimension |
| 152 | The reference unit of measure & is not assigned to any dimension |
| 153 | The proportion or product unit was transferred as reference unit of meas. |
| 154 | Please maintain a proportion unit or product unit |
| 155 | The numerator and/or denominator were set to '1' |
| 156 | Please maintain the proportion/product unit for unit of measurement & |
| 157 | Prop./prod. UoM and base UoM are identical for unit of measurement & |
| 158 | You have already defined a ratio &1 / &2 for unit of measurement & |
| 159 | Numerator, denominator and exponent transferred from unit of measurement |
| 160 | You have already defined a ratio for unit of measurement & |
| 161 | Proportion/product unit &1 and base unit are assigned to dimension &2 |
| 162 | Use of proportion units or product units was activated |
| 163 | Use of proportion units or product units was deactivated |
| 164 | Not all proportion units/product units could be deleted |
| 165 | Proportion unit or product unit & may not be changed |
| 166 | Not all units of measurement could be deleted |
| 167 | Unit of measurement & cannot be deleted or changed |
| 168 | If you want to copy a value, please reset the unit of measurement |
| 169 | Reference unit and proportion/product unit are different in dimension &1 |
| 170 | Document management for batches has been activated |
| 171 | Document management for batches has been deactivated |
| 172 | No proportion valuations exist for material & in valuation area & |
| 173 | No characteristics of batch class & are proportion/product unit relevant |
| 200 | *** Messages - Data Transfer of Proportion/Product Units *** |
| 201 | The import parameters are not consistent as entries were duplicated |
| 202 | The import parameters are not consistent due to missing key |
| 203 | Please enter the editing function for unit of measure &1 |
| 209 | Material &1 is already being processed within the current transaction |
| 210 | UoM &1 not defined for material &2 ==> Cannot be deleted |
| 211 | UoM &1 not defined for material &2 ==> cannot be changed to altern. UoM |
| 212 | The alternative UoM &1 of material &2 may not be deleted |
| 213 | Unit of measure &1 of material &2 is already an alternative UoM |
| 214 | Alternative unit of measure &1 is not consistent |
| 215 | Alternative unit of measure &1 has been checked and corrected |
| 216 | Editing mode (test or update) may not be changed |
| 217 | Material &1 checked successfully - no update (test mode) |
| 218 | No changes were made for material &1 |
| 219 | Processing for material &1 was exited without changes to the database |
| 220 | Read batch-specific units of measure for material &1 |
| 221 | Read batch-specific units of measure for material &1 (logical system &2) |
| 222 | Processing of batch-specific units of measure for material &1 |
| 223 | Processing of batch-specific UoM for mat. &1 (logical system: &2) |
| 224 | Planned vals f. mat. & are inconsistent --> Subseq. maintenance necessary |
| 225 | Error in communication with receiving system &1: &2&3&4 |
| 226 | Please define at least one receiving system |
| 227 | Define only logical system 1 or destination &2 |
| 228 | Define the logical system or the logical destination |
| 240 | Value &3 is not permitted for field &1 in parameter &2 |
| 241 | Please maintain a value for field &1 in parameter &2 |
| 242 | Import parameter &1 contains more than one record for UoM &2 |
| 243 | Import parameters &1 and &2 contain one record for UoM &3 |
| 244 | Replicate fr. engineering chnge mgmt ==> selection criteria not permitted |
| 245 | Replicate from engineering change mgmt ==> recipient not permitted |
| 246 | No materials to be replicated were selected |
| 250 | *** Messaged - Proportion/Product Units General Functions - |
| 251 | No proportion or product units exist for material & |
| 252 | No leading proportion or product unit exists for material & |
| 253 | No units of measure relevant to valuation exist for material & |
| 254 | Please check the planned value of proportion/product unit for material &1 |
| 255 | No proportion or product unit &2 is defined for material &1 |
| 256 | Transaction MB05 is not permitted for dialog |
| 260 | The proportion/product units &1 and &2 are part of dimension &3 |
| 261 | Proportion/product Un &1 and alternative Un &2 are part of dimension &3 |
| 262 | The proportion/product unit &1 is part of the same dimension |
| 263 | Proportion unit & is assigned to a dimension |
| 264 | Product unit & is assigned to a dimension |
| 300 | *** Messages for maintaining the inventory corr. factor |
| 301 | Please limit the selection to avoid long runtimes |
| 302 | The inventory correction factors have been saved |
| 303 | The inventory correction factors have been reset |
| 304 | Not all correction factors have been updated. Please check errors |
| 305 | Not all correction factors have been reset. Please check errors |
| 306 | Not all data records could be processed. Please check errors |
| 307 | The correction factor for plant &1 / stor. loc. &2 cannot be displayed |
| 308 | Error when saving storage location &1 for material &2 and plant &3 |
| 309 | No longtext exists for the chosen line |
| 310 | Please maintain a range for the outlying batch |
| 311 | Value &1 is not allowed. Please enter a positive value |
| 312 | The inventory correction factors will be updated on the database |
| 313 | The inventory correction factors will be reset on the database |
| 314 | Please place the cursor on a line with plant specification |
| 315 | The correction factor on the database is the same as the current factor |
| 316 | The correction factor on the database varies from the current factor |
| 317 | Outlying batches exist for material &1, plant &2, storage location &3 |
| 318 | The inventory correction factor has been updated on the database |
| 319 | The inventory correction factor has been reset on the database |
| 320 | Please maintain a limit value for the planned/actual variance |
| 321 | The inventory correction factor varies by more than &4 % from 1.00000 |
| 322 | List of correction factors incompl. as you do not have all authorizations |
| 323 | Inv. corr. factor must be greater than &1 and smaller than or equal to &2 |
| 324 | The inventory correction factor must be greater than zero |
| 325 | No relevant material master data found for the selection specified |
| 400 | *** Messages for BAPIs and ALE for Batch Management |
| 401 | The batch level in the target system is defined at plant level |
| 402 | The batch level in the target system is defined at material level |
| 403 | The batch level in the target system is defined at client level |
| 404 | Automatic number assignment is not active. Please enter batch. |
| 405 | The batch level must be entered when distributing the batch |
| 406 | Automatic number assignment only; specified batch & will be ignored |
| 407 | No new creation allowed; specified batch & will be ignored |
| 500 | *** Messages for the maintenance of proportion/product units - part 2 |
| 501 | Please maintain a planned value for characteristic &1 |
| 502 | You need to enter a characteristic in order to maintain prop./prod. units |
| 503 | Not all proportion quantities are valuated |
| 504 | Units of measure used for material &1 are being changed |
| 505 | Unit of measure &1 has the subordinate unit of measure &2 |
| 506 | Unit of measure &1 is superior to alternative unit &2 |
| 507 | The already-defined altern. UoM &2 is to be assigned to characteristic &1 |
| 600 | *** Messages on batch revaluation |
| 601 | Stock in transit exists for matl & plant &. Revaluation not possible |
| 602 | No authorization to change the valuation type |
| 603 | Change of valuation type - check open processes |
| 700 | *** Messages for batch history |
| 701 | Restrict the selection |
| 702 | No records were found for the selection criteria specified |
| 703 | Select at least one entry |
| 704 | Deletion report executed by user &1 on &2 at &3 |
| 705 | The following entries were selected for deletion |
| 706 | Material/plant &1, BRO type &2, BRO event &3, time &4 |
| 707 | &1 entries deleted successfully |
| 708 | &1 entries could not be deleted |
| 800 | *** Messages for USER exit examples in Batch Management (general) |
| 801 | Batch number cannot be assigned |
| 802 | Save order before batch number assignment |
| 803 | Batch number cannot be assigned |
| 804 | Batch number already exists |
| 805 | Attribute types MATL,PLNT,BACH,EVDT,EVTM, and ATHR should not repeat. |
| 806 | Updating of index table completed |
| 807 | Table entries deleted |
| 808 | No table entries found |
| 809 | No batch-related object type assigned to current user group |
| 810 | No texts maintained for batch-related object type in Customizing |
| 811 | Material not found |
| 812 | Plant not found |
| 813 | Batch-related object type or event not found |
| 814 | BRO event not found |
| 815 | Enter batch-related object type and event |
| 816 | GUID created for &1 batches |
| 817 | Cannot lock batch &1 of material &2 |
| 818 | Cannot lock batch &1 of material &2 in plant &3 |
| 819 | There are not enough free workprocesses available |
| 820 | There are &1 batches without a GUID |