LM - Treasury: Limit Management
The following messages are stored in message class LM: Treasury: Limit Management.
It is part of development package FTLM in software component FIN-FSCM-TRM-CR-LM. This development package consists of objects that can be grouped under "CRA Limit Management".
It is part of development package FTLM in software component FIN-FSCM-TRM-CR-LM. This development package consists of objects that can be grouped under "CRA Limit Management".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Termination: & & & & |
| 001 | Limit type & is not defined |
| 002 | No limits are defined for limit type & |
| 003 | Select the limit type you want to edit |
| 004 | Enter values for all characteristics |
| 005 | Enter the limit amount |
| 006 | A limit already exists for these characteristics |
| 007 | Limit type & already being edited by user & (limit type locked) |
| 008 | Limit type & already being edited by you (limit type locked) |
| 009 | Error occurred while locking limit |
| 010 | No characteristics have been assigned to limit type & |
| 011 | Limits for limit type & have been changed |
| 012 | No limits are defined for the selections for limit type & |
| 013 | Observe the selection for & |
| 014 | You are not authorized to display the limits for limit type & |
| 015 | You are not authorized to edit all the selected limits |
| 016 | Limit characteristic & not defined |
| 017 | Observe the selections for limit characteristics |
| 018 | Due to an internal error no selections are possible |
| 019 | No single records exist for the limit utilization |
| 020 | Limit utilizations are already being edited |
| 021 | No changes have been made |
| 022 | Number of entries copied: & |
| 023 | Number of new entries: & |
| 024 | Position the cursor on an entry |
| 025 | Select the entries you want to edit |
| 026 | Limit type is not maintained |
| 027 | Position the cursor on the first free field and press F4 |
| 028 | You cannot delete limit type & because limits still exist for it |
| 029 | You cannot change limit type & because limits still exist for it |
| 030 | Select limit characteristics by choosing "New entries" and using F4 Help |
| 031 | You cannot delete limit type & because it still has limit utilizations |
| 032 | You cannot change the determination because limits are still defined |
| 033 | You cannot change the determination because utilizations still exist |
| 034 | You cannot change the transactions because limits are stilled defined |
| 035 | You cannot change the transactions because utilizations are still defined |
| 036 | Date from: & is after date to: & |
| 037 | Overlap: Other limit &/& found (already entered ?) |
| 038 | First restrict validity of the other limit |
| 039 | Position the cursor on a limit field |
| 040 | Limit entered |
| 041 | Limit marked for deletion |
| 042 | Max./min. utilization dates &/& exist |
| 043 | No limit type selected |
| 044 | No utilizations selected -> see long text |
| 045 | No limits selected |
| 046 | Position the cursor on a totals record |
| 047 | Position the cursor on a single record |
| 048 | No partner exists |
| 049 | You are not authorized to edit this limit -> See long text |
| 050 | No determination procedure selected |
| 051 | Limit product group & does not exist |
| 052 | Collective limit planned |
| 053 | Collective limit not planned |
| 054 | Limit in limit type &2 is being edited by user &1 (single lock) |
| 055 | You are already editing a limit in limit type & (single lock) |
| 056 | Error in Customizing for limit characteristics -> See long text |
| 057 | No authorization for RFC in function group & -> See long text |
| 058 | Maximum number of sessions reached |
| 059 | Display not complete (missing authorizations) -> See long text |
| 060 | No characteristic key was selected |
| 061 | File & cannot be opened |
| 062 | Error while branching to transaction |
| 063 | Limit Management not updated because limit type &1 could not be locked |
| 064 | LM not updated because since several limit records could not be locked |
| 065 | LM not updated because limit records could not be locked/unlocked |
| 066 | An error occurred during currency translation (see long text) |
| 067 | At least one limit record could not be unlocked |
| 068 | Unable to unlock limit type &1 for run date &2 |
| 069 | No limit types are defined for the determination procedure specified |
| 070 | No limit types relevant for checks exist for transaction &1 |
| 071 | No characteristics have been assigned to any of the relevant limit types |
| 072 | Internal limit has been exceeded or has not been released |
| 073 | Internal limit has been exceeded or has not been released; no update |
| 074 | ********* 74-103 Messages for ALV Calls ******************* |
| 075 | Error while generating key info for ALV |
| 076 | Error while generating field catalog for ALV |
| 077 | Error while generating sort information for ALV |
| 078 | Error while generating events for ALV |
| 079 | Error while generating ALV list |
| 080 | Function module &1 was called incorrectly |
| 081 | Update of Limit Management was not correctly prepared |
| 082 | Error occured while writing the error log |
| 083 | System error occurred in program &1 |
| 084 | Error occurred while inserting data in table &1 |
| 085 | There is inconsistent data in Limit Management |
| 086 | Limit Management: Error occurred in lock management |
| 087 | Error occurred while updating table &1 |
| 088 | Error occurred while deleting data from table &1 |
| 089 | Limit utilizations were generated successfully |
| 090 | Number of selected transactions: &1 |
| 091 | Number of newly created limits: &1 |
| 092 | Number of updated single records: &1 |
| 093 | Number of updated indexes: &2 |
| 094 | Number of updated totals records: &3 |
| 095 | You have chosen the char. "trader" without the char. "company code" |
| 096 | You have chosen the char. "portfolio" without the char. "company code" |
| 097 | No currency found for the company code or client |
| 098 | No limit characteristics exist for limit type &1 |
| 099 | You are not authorized to lock/unlock the limit for limit type & |
| 100 | Limit does not fulfill the filter criteria of the limit type filter |
| 101 | Error while modifying table &1 |
| 102 | Unable to lock reservation &1 |
| 103 | ******** End of Messages for ALV Calls *************** |
| 104 | No log entries selected |
| 105 | Deletion of limit not permitted; limit utilizations still exist |
| 106 | Error while activating free characteristics |
| 107 | External limit must not exceed internal limit |
| 108 | Entry for limit product group is ignored for product category 710/712 |
| 109 | No update, since limit type &1 could not be locked |
| 110 | LM was not updated because a limit type could not be locked/unlocked |
| 111 | LM was not updated because no utilizations were generated |
| 112 | Save the limit(s) first |
| 113 | Internal error while reading limit record -> inform SAP |
| 114 | Limits locked |
| 115 | Limits unlocked |
| 116 | No locks set |
| 117 | Locked by user: &, date & |
| 118 | Internal error while locking limits for partner & |
| 119 | Authorization missing; lock entry not completely set/deleted |
| 120 | Another user has to release the limit |
| 121 | Limit already released |
| 122 | Release status was set forward |
| 123 | Limit not subject to release |
| 124 | Release status was set back |
| 125 | No limit changes for limit type &1 |
| 126 | & limits were released for limit type & |
| 127 | Release status of limit: &1 (&2), last released by: &3 |
| 128 | Selected limit &1 must be released by a different user |
| 129 | Selected limit &1 has already been released |
| 130 | Multiple entries exist for determination procedure & |
| 131 | You do not have authorization for release (level 1) for limit type &1 |
| 132 | You do not have authorization for release (level 2) for limit type &1 |
| 133 | You are not authorized to release selected limit &1 |
| 134 | Number range object does not exist |
| 135 | Number range & reserved for internal assignment |
| 136 | Number range & reserved for external assignment |
| 137 | Numbers are in critical assignment area |
| 138 | Assigned number is the last one in the number range |
| 139 | More numbers are required than are available |
| 140 | Error while assigning the reservation number |
| 141 | Reservation &1 is being edited by user &2 |
| 142 | You are already editing reservation & |
| 143 | You are not authorized to create reservations |
| 144 | You are not authorized to change reservations |
| 145 | You are not authorized to display reservations |
| 146 | Update was canceled |
| 147 | Unable to unlock reservation &1 |
| 148 | Reservation & created |
| 149 | Reservation & changed |
| 150 | No reservation matched the selection criteria |
| 151 | Limit characteristic & does not exist in the transfer structure |
| 152 | Characteristic & not filled |
| 153 | Characteristic &1 is irrelevant for limit type &2 |
| 154 | Limit already exists |
| 155 | Unable to determine the limit currency |
| 156 | Error while saving the limit characteristics -> Processing terminated |
| 157 | Limit currency transfer: &1 <> Derivation: &2 |
| 158 | Error while saving limit -> Processing terminated |
| 159 | Limit characteristic value was not found |
| 160 | Error in array update of limits for limit type & |
| 161 | Number of updated single records for global collateral: &1 |
| 162 | Number of updated indexes for global collateral: &2 |
| 163 | Determination procedure &1 does not take global collateral into account |
| 164 | Limit was deleted |
| 165 | DP &1 including netting is not supported in single transaction check |
| 166 | User &1 is currently editing partner &2 in limit type &3 |
| 167 | You are currently editing partner &1 in limit type &2 |
| 168 | Reservation cannot be attributed to limit type &1 |
| 169 | Enter the start of the reservation period |
| 170 | Enter the end of the reservation period |
| 171 | If the release procedure is active, specify the initial status |
| 172 | Reservation could not be saved |
| 173 | Irrelevant basic key figure categories have been deleted |
| 174 | End of reservation period is before start of reservation period |
| 175 | Enter an amount other than 0 |
| 176 | Interval for the interim limit must be within the interval for the limit |
| 177 | End of the interim limit is before the start |
| 178 | Intervals for interim limits overlap |
| 179 | Other interim limits exist that are valid on or after the split date |
| 180 | Select exactly one interim limit |
| 181 | The limit cannot be split on this date |
| 182 | The limit has not been released completely |
| 183 | No interim limit exists for the specified split date |
| 184 | The relevant interim limit is not yet completely released |
| 185 | Limit was split successfully |
| 186 | Interim limit not subject to release procedure |
| 187 | DB error while deleting table & => rollback |
| 188 | Enter the attributable amounts |
| 189 | Reservation is already flagged for deletion |
| 190 | Reservation has been flagged for deletion |
| 191 | Release status of interim limit: &1 (&2), last released by: &3 |
| 192 | Interim limit is already released |
| 193 | Keep to the selections for &1 |
| 194 | Reservations have been saved |
| 195 | Reservations that have expired cannot be extended |
| 196 | No reservations are flagged for deletion |
| 197 | The displayed reservations are flagged for deletion |
| 198 | The displayed reservations were deleted |
| 199 | Reservations flagged for deletion cannot be checked |
| 200 | You can only process limits that have expired |
| 201 | Limit type & locked -> no archiving |
| 202 | Limit type &1 is being edited by user &2 -> no archiving |
| 203 | You are already editing limit type & -> no archiving |
| 204 | Limit type & blocked -> termination |
| 205 | Limit type &1 is being edited by user &2 -> termination |
| 206 | You are already editing limit type & -> termination |
| 207 | Select one archiving run only |
| 208 | Report cannot be executed directly -> use transaction SARA |
| 209 | Limit type & has been changed since archiving -> no reload |
| 210 | Characteristic filters for limit type & changed -> filters not reloaded |
| 211 | Limit exists with the same characteristics ==> see long text |
| 212 | Note Customizing has been changed since archiving -> no reload TTXOB |
| 213 | Note Customizing has been changed since archiving -> no reload ID & |
| 214 | Limit has been changed since archiving -> no reload ==> see long text |
| 215 | Only expired limits can be archived |
| 216 | Determination procedure &1 only allows display of global collateral |
| 217 | Limits for &1 could not be generated automatically |
| 218 | The limits for &1 were being processed during the limit check |
| 219 | Utilizations for limit type &1 are being processed by another STC |
| 220 | The selected characteristic combination is locked |
| 221 | The limit has since been changed |
| 222 | Unable to set lock for end-of-day processing for limit type &1 |
| 223 | Global collateral cannot be included in the single transaction check |
| 224 | Number of updated totals records for global collateral: &1 |
| 225 | At least one of the characteristic combinations could not be locked |
| 226 | Limit records changed for limit type &1 |
| 227 | Limits for limit type &1 could not be changed |
| 228 | Limit records for limit type &1 could not be changed |
| 229 | At least lock for end-of-day processing could not be set |
| 230 | Release changes saved successfully |
| 231 | Update could not be made |
| 232 | Enter a start date for the interim limit |
| 233 | Enter an end date for the interim limit |
| 234 | No text is maintained for limit type &1 in language &2 |
| 235 | For single transaction check log, select records with status 2 only |
| 236 | &: See parameter documentation |
| 237 | Enter a value between 0 and 100 |
| 238 | Number of updated detail records: &1 |
| 239 | Select a maximum of five characteristics |
| 240 | Number of updated detail records for global collateral: &1 |
| 241 | No limits exist for the specified selection criteria |
| 242 | Flow trace table VTBLIL is inconsistent |
| 243 | You do not have authorization to maintain objects with limit type &1 |
| 244 | Error when converting the amount |
| 245 | A valid limit exists for: &1 |
| 246 | LT &1, object &2: Attrib. amnt exists in LT &3 |
| 247 | LT &1, Coll. ID &2: Attrib. amount exists in LT &3 |
| 248 | Transaction &1 and report &2 are locked due to zero downtime maintenance |
| 249 | No update - maximium of lock attempts by E_VTBLIL24 reached |
| 250 | List has been sent |
| 251 | Specify the recipient of the review |
| 252 | An invalid review date was determined |
| 253 | Incomplete combination of review date/recipient |
| 254 | Employee responsible was changed successfully |
| 255 | Unable to change the employee responsible |
| 256 | Unable to enter automatic review dates |
| 257 | Limit type &1 is currently being edited by user &2 |
| 258 | You are already editing limit type & |
| 259 | Unable to send list |
| 260 | Newly calculated review dates entered successfully |
| 261 | Lock error |
| 262 | A limit type is currently being edited by & |
| 263 | You are already editing a limit type |
| 264 | No basic Customizing settings maintained for limit management |
| 265 | Default risk rule &1 is not defined in Customizing |
| 266 | Do not enter a validity date for the credit risk |
| 267 | Enter a validity date for the settlement risk |
| 268 | Restriction not permissible; utilizations still exist |
| 269 | The specified limit type does not take account of group relationships |
| 270 | Business partner is not a characteristic of this limit type |
| 271 | Search terminated since start or end of factory calendar & reached |
| 272 | Date & is invalid |
| 273 | Date & lies before the start of factory calendar & |
| 274 | Date & lies after the end of factory calendar & |
| 275 | Factory calendar & does not exist |
| 276 | First enter a limit characteristic |
| 277 | No input help available |
| 278 | More than &1 data records were selected |
| 279 | Transfer currency &1 <> existing limit currency &2 |
| 280 | Invalid entries in input table |
| 281 | Error when converting &1 to &2 |
| 282 | No factory calendar ID has been defined in Customizing |
| 283 | No notes exist |
| 284 | Select a line that contains a limit type |
| 285 | Select only one entry |
| 286 | Totals involving several determination procedures are not normally useful |
| 287 | Grouping across several utilization statuses is not useful |
| 288 | Grouping across several determination dates is not useful |
| 289 | Grouping across several currencies is not possible |
| 290 | Inconsistency has occured while assigning keys for interim limits |
| 291 | Unable to update interim limit |
| 292 | Interim limit updated successfully |
| 293 | Limit type was not clearly specified |
| 294 | Limit record was not clearly specified |
| 295 | No limit records exist for the selected criteria |
| 296 | Enter values for all the chosen selection options |
| 297 | Select at least one risk type |
| 298 | Enter the display currency for the rounding factor |
| 299 | Error during array update for interim limits / reference number & |
| 300 | Evaluation time not in table VTBLIL for limit type &1, date &2, status &3 |
| 301 | Link to determination details not possible for status 3 |
| 302 | Link to NPV calculation not possible for status 3 |
| 303 | Choose at least one limit characteristic |
| 304 | Select only one option for exception control |
| 305 | Day & is not a workday |
| 306 | Specify either the desktop file or the application server |
| 307 | Specify the input file |
| 308 | Enter a positive attributable amount |
| 309 | No determination details exist for reservations via attributable amounts |
| 310 | No NPV calculation possible for reservations made via attributable amnts |
| 311 | The limit has not been clearly specified |
| 312 | Errors occurred while determining the business partner address |
| 313 | No collateral items exist for this object |
| 314 | Data was not updated - an error occurred while locking E_VTBLIL24 |
| 315 | Number of limits processed : & |
| 316 | Number of interim limits processed : & |
| 317 | Number of utilization indexes processed : & |
| 318 | Number of collateral indexes processed : & |
| 319 | Number of totals records processed : & |
| 320 | Enter a date for the fiction |
| 321 | Enter a date for the market value change period |
| 322 | Enter a date for the start of the original term |
| 323 | Enter the end of the original term |
| 324 | Enter the currency of the basic key figures |
| 325 | An error occurred while generating table &1 |
| 326 | An error occurred while activating table &1 |
| 327 | An error occurred while writing to DDIC for table &1 |
| 328 | An error occurred while deleting table &1 |
| 329 | Reservation is not relevant for counterparty/issuer risk nor C/R risk |
| 330 | Enter the same currency for the basic key figures |
| 331 | An error occurred while reading DDIC information for table &1 |
| 332 | Unable to derive a country/region relevant for country/region risk |
| 333 | Error while reading the DDIC information for field &1 &2 |
| 334 | Changes to limit type & are not permitted, since utilizations still exist |
| 335 | No active analysis structure for market risk found |
| 336 | Error while exporting market risk characteristics from anal. structure &1 |
| 337 | Analysis characteristic &1 is already used in a limit type |
| 338 | Characteristic &1 does not exist in Market Risk |
| 339 | An error occurred while converting dependent tables |
| 340 | Error while making object catalog entry (TADIR) for table &1 |
| 341 | Table &1 activated, status = &2 |
| 342 | Value &1 is not defined for custom characteristic &2 in Customizing |
| 343 | Error while scheduling job for mass activation |
| 344 | An error occurred while updating the post-run update table |
| 345 | Generate a table of characteristics for limit type &1 |
| 346 | Temporary object lock - repeat the activity |
| 347 | Check activation status for table &1 (SE11) |
| 348 | Unable to set lock for single transaction check |
| 349 | Unable to lock at least one limit record |
| 350 | Unable to lock at least one reservation |
| 351 | Selection options for analysis characteristics not yet generated |
| 352 | An active end-of-day processing run has exceeded the maximum runtime |
| 353 | An error occurred while generating program code |
| 354 | Selection options were generated successfully |
| 355 | Unable to change determination proc. &1; limits are still defined for it |
| 356 | Unable to change determination proc. &1; utilizations still exist for it |
| 357 | Error while reading DDIC information for characteristic &1 |
| 358 | No limit types to be checked exist for the specified determination proc. |
| 359 | Generated table &1 already exists for limit type &2 in client &3 |
| 360 | Error while writing index &1 to table &2 |
| 361 | Error in posting deadline administration |
| 362 | Characteristic &1 is used in limit type &2, client &3 |
| 363 | Deletion requires reorganization => See long text |
| 364 | Error occurred while generating InfoSet |
| 365 | Error occurred while importing InfoSet |
| 366 | Analysis charact. and structure of generated charact. have initial values |
| 367 | Error occurred while generating InfoSet |
| 368 | Error occurred while locking the InfoSet |
| 369 | Number of analysis characteristics relevant for limits: &1 |
| 370 | Number of analysis characteristics in DDIC structure: &1 |
| 371 | Anal. characteristics and structure of generated characteristics differ |
| 372 | Generation of totals records: Processing terminated |
| 373 | User error in online mode |
| 374 | User error in online mode |
| 375 | Compound char. &1 for analysis char. &2 is not defined in the limit |
| 376 | Position the cursor on a line item |
| 377 | An error occurred whilst updating the drilldown |
| 378 | Write totals records: Processing is serial |
| 379 | Compound char. &1 for analysis char. &2 is missing for this limit type |
| 380 | A maximum of 15 characteristics is permitted for each limit type |
| 381 | Another/no analysis structure is defined in Limit Management |
| 382 | Analysis structure &1 is not defined in Limit Management: Client &2 |
| 383 | You must define at least one characteristic for limit type &1 |
| 384 | Generation request executed without errors |
| 385 | Data moved without errors |
| 386 | Deletion of characteristics table &1 for limit type &2 was successful |
| 387 | Analysis charact. and structure of generated charact. are consistent |
| 388 | No entries were deleted from table &1 |
| 389 | The specified entries were deleted from table &1 |
| 390 | Messages relating to reservation &1 |
| 391 | Write totals records: Processing taking place in parallel |
| 392 | End-of-day processing run with time stamp &1 &2 is still active |
| 393 | Load the limit records into table VTBLS => long text |
| 394 | Load the limit records into generated tables => long text |
| 395 | Start of the post-run update: postprocessing is now possible |
| 396 | Entry successfully deleted: Table &1 client &2 limit type &3 |
| 397 | Deletion of entry failed: Table &1 client &2 limit type &3 |
| 398 | Table &1 successfully deleted |
| 399 | Process cancelled by user |
| 400 | ************* Reserved for Messages Relating to Limit Transfers ********* |
| 401 | Limit transfer does not fall within the interval for the left limit |
| 402 | Limit transfer does not fall within the interval for the right limit |
| 403 | Limit transfer exceeds the internal limit on &1 |
| 404 | Limit transfer exceeds the external limit on &1 |
| 405 | You do not have authorization to create limit transfers |
| 406 | You do not have authorization to change limit transfers |
| 407 | You do not have authorization to display limit transfers |
| 408 | Limit transfer no. &1 in limit type &2 already being processed by user &3 |
| 409 | You are already processing limit transfer no. &1 in limit type &2 |
| 410 | Invalid key for limit |
| 411 | Limit transfer &1 for limit type &2 was created |
| 412 | Limit transfer &1 for limit type &2 was changed |
| 413 | Unable to save limit transfer |
| 414 | Select exactly two limits |
| 415 | You can create a limit transfer only from within a limit type |
| 416 | At least one of the limits for the limit transfer has not been released |
| 417 | Limit transfer is already flagged for deletion |
| 418 | Start date of limit transfer is later than the end date |
| 419 | Restriction not permitted - limit transfers still exist |
| 420 | Limit cannot be deleted - limit transfers still exist |
| 421 | Choose different characteristic values for the limit transfer |
| 422 | Limit transfer was flagged for deletion |
| 423 | External amount of the limit transfer must not exceed the internal amount |
| 424 | Postprocessing is not possible during an end-of-day processing run |
| 425 | Object & is locked by a generic lock set in another application |
| 426 | Limit transfers still exist; function not possible |
| 427 | External limit exceeds internal limit for &1; see long text |
| 429 | ********* End of Reserved Messages for Limit Transfers ****************** |
| 430 | Table & was generated |
| 431 | Limit type &: No limit record could be found for limit & |
| 432 | A conflict occurred in determination procedure &1 |
| 433 | Limit type &1 - inclusion of transactions: netting |
| 434 | Limit type &1 - inclusion of transactions: accumulation |
| 435 | Limit type &1 - inclusion of transactions: only liability transactions |
| 436 | Number of determination procedures that were checked: &1 |
| 437 | Treatment of transactions in LT &1 conflicts with another LT in the DP |
| 438 | Archive file has incorrect format -> unable to delete data |
| 439 | Archive file has incorrect format -> unable to reload data |
| 440 | You are not authorized to download data (user &1) |
| 441 | You are not authorized to upload data (user &1) |
| 442 | Error when downloading data to the front end (file name &1) |
| 443 | Error when uploading data from the front end (file name &1) |
| 444 | Not authorized |
| 445 | Specify display currency or enter limit currency in limit type definition |
| 446 | Specify exchange rate type or enter it in limit management basic settings |
| 447 | Specify the limit utilization base |
| 448 | Only limit types with characteristic "Business Partner" can be used |
| 449 | Enter the external validity period when you enter the external limit |
| 450 | External validity period must not exceed internal validity period |
| 451 | Limit type &1 does not exist |
| 452 | No limit utilizations found for limit type &1 and utilization base &2 |
| 453 | No attributable amount calculated for trade req. &1/&2, bus. partner &3 |
| 454 | Limit check for instrument category &1 is not supported |
| 455 | Online limit check is not activated in configuration of limit type &1 |
| 456 | Limit type &1 has additional limit characteristics |
| 457 | Messages for trade request &1/&2, business partner &3: |
| 458 | Request is too large |
| 459 | Determination procedure &1 does not exist |
| 460 | Attributable amount calculated for only one leg (trade req. &1/&2, BP &3) |
| 461 | Settlement risk is not supported |
| 462 | End of messages for trade request &1/&2, business partner &3 |
| 500 | Changes to company code &1 are not permitted |
| 501 | Specify a business partner |
| 502 | Specify a currency |
| 503 | Specify a company code |
| 504 | No limit exists with key &1 &2 &3 &4 |
| 600 | *********** Messages for BW Reporting ********************** |
| 601 | Error when reading the totals records |
| 602 | You have no authorization for transaction &1 |
| 603 | Error during generation of DataSource &1 |
| 604 | Enter a name and a description for the DataSource that is to be generated |
| 605 | Extraction structure &1 was created successfully |
| 606 | DataSource &1 was created successfully |
| 607 | You have no authorization for transaction &1 |
| 608 | &1 InfoObjects were created in BW |
| 609 | ODS object &1 already exists in BW |
| 610 | Name of the ODS object can be up to 8 characters long |
| 611 | Error when determining the BW destination |
| 612 | Enter a name for the ODS object that is to be created |
| 613 | Enter a description for the ODS object that is to be created |
| 614 | Specify the InfoArea to which the ODS object is to be assigned |
| 615 | Specify the ODS object that is to be changed |
| 616 | Unable to use &1 as the extraction structure for Limit Manager |
| 617 | Unable to use &1 as the extraction structure at limit level |
| 618 | Unable to use &1 as the extraction structure at transaction level |
| 619 | Specify the currency InfoObject for &2 for the InfoObject for &1 |
| 620 | Use one of the following functions first: Create, Change, or Prepare ODS |
| 621 | Error when generating the characteristic include &1 for BW extraction |
| 622 | System include &1 with limit characteristics was generated successfully |
| 623 | Structure &1 already exists; do you want to regenerate it? |
| 624 | Error when reading DDIC information for structure &1 |
| 625 | DataSource &1 already exists; do you want to regenerate it? |
| 626 | Unable to find logical system &1 |
| 627 | Internal error: Error &1 in function module &2 in &3 |
| 628 | RFC error occurred |
| 629 | RFC error occurred; symptom &1 |
| 630 | &1&2&3&4 |
| 631 | Error when determining the BW destination |
| 632 | Unable to activate the InfoObjects that were created |
| 633 | Error when updating InfoObject catalog &1 |
| 634 | Data is inconsistent |
| 800 | ************************Drilldown: 800-899***************************** |
| 801 | Form & contains an interval for the base date for utiliz. determination |