LR - CATS: Cross-Application Time Sheet
The following messages are stored in message class LR: CATS: Cross-Application Time Sheet.
It is part of development package CATS in software component CA-TS. This development package consists of objects that can be grouped under "".
It is part of development package CATS in software component CA-TS. This development package consists of objects that can be grouped under "".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Variant & does not exist |
| 002 | The transaction is locked by user & |
| 003 | Week & is incorrect |
| 004 | The date & used to determine the week is incorrect |
| 005 | The week & entered to determine the day is incorrect |
| 006 | Internal date & is incorrect |
| 007 | Error when inserting record & & & |
| 008 | Error when changing record & & & |
| 009 | Error when deleting record & & & |
| 010 | Select the personnel numbers for the time sheet |
| 012 | Not authorized to maintain data for personnel number &2 using profile &1 |
| 013 | Not authorized to display data for personnel number &2 using profile &1 |
| 014 | Data has not been changed since it was last saved |
| 015 | Select the lines you want to delete |
| 016 | Your data has been saved |
| 017 | Select the column you want to sort by (again) |
| 018 | Internal program error in 'ASSIGN' |
| 019 | Select the line above which you want to insert an entry |
| 020 | Error when accessing the SAP repository |
| 021 | Error when accessing an internal table |
| 022 | Personnel number & does not exist |
| 023 | Select the lines you want to copy |
| 024 | &1 of &2 times were not released as they are in the future |
| 026 | Confirmations pool & does not exist |
| 027 | Time recording not intended for personnel no. & |
| 028 | Error when importing time data |
| 029 | Select one or more completed lines in the data entry section |
| 030 | Internal error occurred |
| 031 | Position the cursor on the section you want to process |
| 032 | Position the cursor on the line you want to split and on the day |
| 033 | Personnel number & does not exist on & |
| 034 | No authorization for personnel number & using profile & on & |
| 035 | Personnel numbers not selected due to lack of authorization |
| 036 | Error when writing to interface table for & |
| 037 | No approval procedure required. Check data entry profile. |
| 038 | Enter a valid personnel number |
| 039 | Select the column you want to sort by |
| 040 | Selection by work center assignment allowed for one personnel no. only |
| 041 | Select a line, column, or single cell |
| 042 | Some of the data was set to zero but could not be deleted |
| 043 | No time data administrator &1 in group &2 |
| 044 | You cannot scroll any further |
| 045 | Organizational object & of type & not found on & |
| 046 | You cannot change the data entry period |
| 047 | The unit "hour" could not be determined |
| 048 | Error when determining next document number |
| 049 | The number set will soon be used up |
| 050 | You cannot save the data without workflow processing |
| 051 | More than 24 hours entered for personnel number &1 on &2 |
| 052 | Week & not allowed |
| 053 | & lines containing the term & |
| 054 | Select at least one personnel number |
| 055 | Order & does not exist. Check your entry. |
| 056 | Operation & not in order & |
| 057 | Suboperation & to operation & not in order & |
| 058 | Infotype record created using the Time Sheet (CATS) |
| 059 | Enter a search term |
| 060 | Document number & does not exist |
| 061 | Personnel area/subarea &/& does not exist |
| 062 | Reference data record & & & does not exist |
| 063 | Work center &1 in plant &2 does not exist |
| 065 | Personnel number & cannot be unlocked |
| 066 | Enter a plant for the work center |
| 067 | Only object type O is allowed |
| 068 | Specify a controlling area |
| 069 | Screen & not supported |
| 070 | Incorrect online mode: Only A, E, and space are permitted |
| 071 | You cannot split totals lines or target lines |
| 072 | No data transferred to interface |
| 073 | Choose a line from the list |
| 074 | Save your entries |
| 075 | Assign plant in HR master record |
| 076 | Function not possible on field selected |
| 077 | Changes have been saved and written to the interface tables |
| 078 | Rejection reason cannot be displayed |
| 079 | Enter relevant working time attributes |
| 080 | Object & does not exist |
| 081 | The attendance/absence type &/& does not exist on & |
| 082 | No authorization for infotype & |
| 083 | No infotype 0007 record (Planned Working Time) on & |
| 084 | & |
| 085 | Error when saving data to table CATSDB |
| 086 | Error when saving data to the CO interface table |
| 087 | Error when saving data to the HR interface table |
| 088 | Error when saving data to the MM interface table |
| 089 | Error when saving data to the PM interface table |
| 090 | Error when saving data to the PS interface table |
| 091 | Document number & is invalid |
| 092 | No follow-on document for CATS document & |
| 093 | Personnel number & locked by user & |
| 094 | All selected personnel numbers are locked |
| 095 | You are not authorized to enter attendance/absence & for personnel no. & |
| 096 | No predecessors found |
| 097 | Data has already been entered for the current period |
| 098 | No data for previous period |
| 099 | No follow-on document can be displayed for the selected line |
| 100 | Enter purchase order number and item number |
| 101 | Purchase order item & & does not exist |
| 102 | Account assignment for purchase order item & & copied |
| 103 | Enter an account assignment |
| 104 | Plant & from CATS does not match plant & for purchase order item |
| 105 | Service & does not exist |
| 106 | You have entered a purchase order item which is not a service item |
| 107 | Unit of measure & does not correspond to base unit of measure & |
| 108 | & is a network. Enter in "Network" field. |
| 109 | & is not a network. Enter in "Order" field |
| 110 | No read authorization for personnel number & |
| 111 | Personnel number & not available for approval |
| 112 | Incorrect approval mode for personnel number & |
| 113 | No authorization to approve personnel number & |
| 114 | No authorization to approve attendances/absences for personnel no. & |
| 115 | Attendance/absence type & not found |
| 116 | No index for selection conditions |
| 117 | No data matches the specified selection criteria |
| 118 | No HR document |
| 119 | Enter the order or network for the operation |
| 120 | Enter the operation for the suboperation/element |
| 121 | Cancelation: no confirmation segment for CATS document & (-> long text) |
| 123 | Some hours were not distributed due to days off |
| 124 | & times were released |
| 125 | Enter a vendor number |
| 126 | Vendor &1 in infotype does not match vendor in purchase order &2 |
| 127 | An error has occurred |
| 128 | Enter a combination of task type, task level, and task component |
| 131 | Personnel number & does not exist |
| 132 | No read authorization for personnel no. & |
| 133 | Confirmations are not allowed for this status |
| 134 | Enter either the order or the network |
| 135 | Purchase order & does not exist |
| 137 | No postprocessing pool as error occurred with Save --> Message list |
| 138 | Enter a controlling area |
| 139 | Enter a sender cost center or an operation |
| 140 | Enter an activity type |
| 143 | No changes were made |
| 144 | Sort sequence is completed automatically |
| 147 | Enter a number of days |
| 149 | You have maintained your data. Choose "Save" to save the data. |
| 150 | DO NOT start in a productive system (see long text) |
| 151 | Enter a data entry profile and a personnel number |
| 152 | Enter a personnel number |
| 153 | Enter clock times using daily or weekly entry only |
| 154 | Select a message line |
| 155 | Select a distribution period within the data entry period |
| 156 | End date must come after start date |
| 157 | Enter a maximum of 24 hours |
| 158 | A record transferred on & does not have a personnel number |
| 159 | Transferred date & is incorrect |
| 160 | Personnel number & does not exist or you do not have authorization |
| 161 | Data entry profile &1 does not exist |
| 162 | Data record number & cannot be processed |
| 163 | Record assigned number & has been transferred several times |
| 164 | Record of & with & hours has not been posted to HR |
| 165 | Record of & with & hours already posted to HR |
| 166 | "Several personnel numbers" and "Workdays only" are mutually exclusive |
| 167 | "Several personnel numbers" and "Worklist" are mutually exclusive |
| 168 | Record transferred for & (day off) |
| 169 | Sender and receiver are the same |
| 170 | No documents found |
| 171 | Activity price not required for activity allocation |
| 172 | You cannot scroll. You have reached the first selected line. |
| 173 | You cannot scroll. You have reached the last selected line. |
| 174 | Record of &1 with &2 hours was not deleted in HR |
| 175 | Record of &1 with &2 hours was deleted in HR |
| 176 | Profile incompatible with transferred data |
| 177 | A transferred record does not specify a number of hours |
| 178 | Sender cost center & and receiver cost center & are the same |
| 179 | Enter a sender object |
| 180 | A currency could not be determined for personnel no. & on & |
| 181 | Position or work center & & does not exist on & |
| 182 | Different payment not allowed for infotype & (T582Z) |
| 183 | Premium number/indicator &/& does not exist on & |
| 184 | Maximum of 24 hours copied for each day |
| 185 | Error when editing long text |
| 186 | Enter the hours before you maintain the long text |
| 187 | No more texts can be created on & |
| 188 | Enter the plant for the work center |
| 189 | Enter the currency for the activity price |
| 190 | Pay scale type/area not available for personnel number & on & |
| 191 | Employee group/subgroup &/& does not exist |
| 192 | Pay scale group/level &/& does not exist on & |
| 193 | Pay scale type/area not found for personnel number & on key date & |
| 194 | No long text for selected line |
| 195 | Personnel number & not active on & |
| 196 | Transfer already active; try again later |
| 197 | New records cannot have a long text indicator |
| 198 | You cannot trigger a workflow for external data |
| 199 | Use a data entry profile for several personnel numbers |
| 200 | Data is approved immediately. Approval using workflow not required. |
| 201 | Time collision & - & with & - & |
| 202 | Time collision & - & with previous day & - & |
| 203 | Record of & with & hours could not be posted |
| 204 | Record of & with & hours could not be deleted |
| 205 | Number of hours recorded & less than target hours & |
| 206 | Number of hours recorded & exceeds target hours & |
| 207 | Collision with full-day HR record |
| 208 | & - & collision with HR record < one day |
| 209 | Select a line with an order reference |
| 210 | Select a line in the data entry section |
| 211 | Select one line only |
| 212 | You have entered more than 24 hours per day |
| 213 | Personnel number: & Date: & |
| 214 | Order/network & entered without an operation (see long text) |
| 215 | Enter a distribution function |
| 216 | The number of hours released & exceeds the target hours & |
| 217 | The number of hours released & is less than the target hours & |
| 218 | The system cannot display possible entries |
| 219 | Only the data types 'CHAR' and 'NUMC' are allowed |
| 220 | Sender and receiver business processes are identical: & |
| 221 | Collision with full-day attendance/absence |
| 222 | Collision with full-day attendance/absence on previous day |
| 223 | & field is not in stucture CI_CATSDB |
| 224 | &1 field already used to define additional field &2 |
| 225 | No long text available |
| 226 | Long text not available in logon language: Displayed in & |
| 227 | Collision between full-day CATS record and HR record < one day |
| 228 | Enter a document number |
| 229 | Select one personnel number only |
| 230 | No errors were found |
| 231 | No entry in check log |
| 232 | Sender cost center & copied from work center & |
| 233 | "Immediate transfer to HR" and "Approval required" are mutually exclusive |
| 234 | Capacity category and split number must be entered together |
| 235 | Split & not found for capacity category & |
| 236 | Quantity unit & incompatible with quantity unit & |
| 237 | Enter an item number |
| 238 | A new line can only be inserted above an existing line |
| 239 | Error occurred during conversion |
| 240 | No suitable entry found |
| 241 | Position your cursor on a column in the data entry section |
| 242 | Vendor & does not exist |
| 243 | Select either "Final confirmation" or "Partial confirmation" |
| 244 | Enter a work center and a plant |
| 245 | Attendance/absence type and wage type not permitted together |
| 246 | Enter an attendance/absence type or a wage type |
| 247 | The network or order & does not exist |
| 248 | Control key of operation & & does not permit confirmation |
| 249 | Record cannot be saved because no. of hours = 0 |
| 250 | Interface table CATSMM cannot be locked |
| 251 | You cannot reset the lock for interface table CATSMM |
| 252 | Work center &1 not permitted for receiver object |
| 253 | Workflow recipient could not be determined |
| 254 | No automatic recipient determination for recipients entered |
| 255 | Some data was not deleted because it has already been approved |
| 256 | Data record number &1 can no longer be changed |
| 257 | Record &1 has the wrong cost accounting variant |
| 258 | Enter an attendance/absence type |
| 259 | Record with external document number &1 does not exist |
| 260 | No counter has been entered |
| 261 | Enter one sender object only |
| 262 | More than one recipient type in SAP enhancement |
| 263 | Sender business process not permitted for confirmations |
| 264 | Unit of measure &1 cannot be converted to unit &2 of business process |
| 265 | Unit not permitted |
| 266 | Currency not permitted for activity allocation or statistical key figure |
| 267 | Currency not permitted with confirmation |
| 268 | Currency not permitted with activity allocation |
| 269 | Currency not permitted with attendance or absence |
| 270 | Unit & not permitted with an activity allocation |
| 271 | Unit & not permitted with a confirmation |
| 272 | Unit & not permitted with an attendance or absence |
| 273 | Service entry with & hours cannot be changed |
| 274 | The template was saved successfully |
| 275 | Error when saving the template |
| 276 | The template was successfully reset |
| 277 | Error when deleting the template |
| 278 | Unable to set data entry profile "&" as default setting |
| 279 | Profile "&" was set as the default |
| 280 | There is no template that can be reset |
| 281 | The standard template was overwritten |
| 282 | Unable to delete the standard template |
| 283 | Unable to overwrite the standard template |
| 284 | Line contains no profitability segment as account assignment |
| 285 | Error when determining the fiscal year variant |
| 286 | Error when determining the fiscal year |
| 287 | Error when reading the profitability segment |
| 288 | Combination of stat. key figure and profitability segment not allowed |
| 289 | Do not enter a profitability segment |
| 290 | Line does not contain a controlling area |
| 291 | The previous standard template was not overwritten |
| 292 | The activity/operation & you entered does not exist |
| 293 | Records with profitability segment are not copied from the worklist |
| 294 | Display records cannot be copied |
| 295 | Time format is incorrect; check the start time and end time |
| 296 | Records relevant to cProjects are not copied from the worklist |
| 297 | Field &1 does not exist in the structure CI_PRS_CPILS_1 |
| 298 | Field &1 is already used for service attribute &2 |
| 299 | Only data types 'CHAR', 'DATS', and 'NUMC' are permitted |
| 300 | *Messages for data transfer to CO |
| 301 | No data for transfer |
| 302 | Error when changing document &V1& in CATSCO table |
| 303 | Error when transferring data to CO |
| 304 | All data successfully transferred to CO |
| 305 | Error when creating a handle for CATS |
| 306 | CATSCO table reorganized successfully |
| 307 | Transfer indicator reset for the selected records |
| 308 | Inconsistencies found between CATSCO and CO tables |
| 309 | Select only documents not yet transferred to CO |
| 311 | Time Sheet document does not exist |
| 312 | Error when converting the network number to CATS document & |
| 313 | Default data is correct |
| 314 | Choose another cell |
| 315 | Error when deleting a record from table & |
| 316 | Error on insertion to table CATSCOSUM |
| 317 | Enter an attendance or absence type or a wage type |
| 318 | Do not enter a sender or an activity type |
| 319 | Function not possible for display-only record |
| 320 | Do not enter a purchase order number/item or an activity number |
| 321 | Error when reading the employee's master cost center |
| 322 | Error when reading master activity type |
| 323 | Activity allocation master/sender cost center not required |
| 324 | Select a valid work center |
| 325 | No data found |
| 326 | Function not possible for display-only record |
| 327 | The customer enhancements cannot be assigned to line &1 |
| 328 | Statistical key figure & not found |
| 329 | Unit of measure & does not exist |
| 330 | Enter a valid unit of measure |
| 331 | Enter only & decimal places |
| 332 | Do not enter an activity type when entering statistical key figures |
| 333 | Use total values only when entering statistical key figures |
| 334 | Do not enter a sender cost center when entering statistical key figures |
| 335 | & on & |
| 336 | & on & from & to & |
| 337 | Business function PRS_ERP_CPILS_1 is inactive |
| 338 | No errors found; data can be transferred successfully. |
| 345 | No search can be executed for this field |
| 350 | Restriction parameters contain formatting errors |
| 351 | Data records have not been imported completely, reduce the selection |
| 352 | &1: Number of database record hits exceeds &2; number reduced to &3 |
| 353 | Record has long text flag without corresponding long text |
| 354 | Record has long text but no long text flag |
| 355 | No CATS record exists for the long text in row &1 |
| 356 | Long text (flag) is not allowed for a CATS record that is to be deleted |
| 357 | Error creating the long text |
| 358 | Error deleting the long text |
| 359 | Could not read long text for a record |
| 360 | The text format &1 is invalid |
| 361 | Could not copy long text when changing the record |
| 362 | Approval not possible: Data is being processed |
| 363 | Some of the data to be approved is being processed |
| 364 | An error occurred on starting the workflow |
| 365 | An error occurred on starting the workflow |
| 366 | An error occurred while deriving the FM area. |
| 367 | Error during budget period configuration |
| 370 | **************************EHP6 ESS CATS RENO***************************** |
| 371 | Enter a relevant public holiday absence type or attendance type |
| 372 | Select the HR-enabled CATS checkbox to use payroll period end date |
| 401 | Specify a data entry profile |
| 402 | Specify a lower limit and/or an upper limit |
| 403 | Select "Too many" or "Too few" |
| 404 | Error when determining target hours for personnel no. & |
| 405 | A mail recipient could not be determined for personnel no. & |
| 406 | Error when sending mail to &1 for personnel no. &2 |
| 407 | Processing not possible: Network or order has already been deleted |
| 412 | & 1 records ignored for lack of authority |
| 666 | System error: & & & & |
| 667 | & & & & |
| 670 | Line total is too large;it will be displayed as 0 |
| 671 | An error occured while determining the business partner. |
| 672 | An error occured while deterimining the cProject receiver system. |
| 673 | ALE distribution scenario for cProject contains errors. |
| 674 | Error while reading metadata for the cProject detail fields. |
| 675 | Unit &1 is not permitted for reporting to the cProject. |
| 676 | Customizing error: No "seconds" unit available. |
| 677 | cProject &1 &2 is invalid. |
| 678 | Local logical system not defined |
| 679 | Error while transferring detailed information into cProject. |
| 680 | Select a line with a cProject reference. |
| 681 | &1 is before &2 |
| 682 | The percent complete cannot exceed 100% |
| 700 | ++++++++++++++Customizing messages+++++++++++++++++++++++++++++++++++++++ |
| 701 | Enter a task ID |
| 702 | Only standard tasks (TS) or tasks (T) are allowed |
| 703 | Enter a valid period |
| 704 | Select via pers. list to enter data for several personnel numbers |
| 705 | No default for CO data for cost allocation to receiver object |
| 706 | Error on insertion to table TFAWC |
| 707 | Choose an attendance/absence or a wage type under "Default values" |
| 708 | Personal templates not compatible with profile for multiple persons |
| 709 | For selection using pers. list the initial screen is required |
| 710 | Task ID is not permitted for automatic selection of recipient |
| 711 | Error inserting into table &1 |
| 750 | ***--- CE CATS ---*** |
| 751 | Person ID & does not exist. Check your entries |
| 752 | Enter Person ID |
| 753 | Personnel number & does not exist. Check your entries |
| 800 | *+++++++++++++ Messages for CATS ITS +++++++++++++++++++++++++++++++++++* |
| 801 | Data entry profile &1 does not exist |
| 802 | No personnel no. has been maintained in the system for your user |
| 803 | Your worklist is empty. Enter the account assignments manually. |
| 804 | Search unsuccessful. Enter your search criteria again. |
| 805 | This is your time sheet for the current data entry period |
| 806 | The time sheet was saved successfully & |
| 807 | The time sheet contains errors. You cannot save. |
| 808 | Your time sheet is consistent and can be saved |
| 809 | Position the cursor on the field for which you want to search |
| 810 | The search found more than & hits. Only the first & are displayed. |
| 811 | Your entry "&1" in row &2 on &3 is invalid and has been deleted |
| 812 | Work item "&1" not assigned to wbs element "&2" |
| 813 | Enter work item only with wbs element |
| 814 | No staffing exists for personnel number &1 |
| 815 | Invalid assignment of wbs element &1 for personnel number &2 |
| 850 | *+++++++++++++ CATS Archiving ++++++++++++++++++++++++++++++++++++++++++* |
| 851 | No data exists for counter & |
| 852 | No data exists for document number & |
| 853 | No data exists for personnel number & |
| 854 | No data exists for & |
| 855 | Enter a valid value |
| 860 | No data was selected |
| 861 | Canceled by user |
| 863 | Parameters of function module & are inconsistent |
| 864 | Template cannot be saved for multi-person data entry profiles. |
| 865 | E-mail not sent to employee &1. |
| 866 | E-mail sent successfully to employees with missing time entries. |
| 867 | Error when determining target hours for employee & |
| 868 | Employee &1 does not exist |
| 869 | Target hours could not be calculated for all the dates for employee &1 |
| 870 | 'Since' should be less than today's date. |
| 871 | Please enter Start Date. |
| 872 | Please enter End Date. |
| 873 | Unable to determine job runtime information. |
| 874 | Error when determining target hours for specified selection criteria. |
| 875 | System configuration does not allow you to record time on task type &1 |