LTR2_ES_CHECK - LTR2 Checks on Embedded Specification
The following messages are stored in message class LTR2_ES_CHECK: LTR2 Checks on Embedded Specification.
It is part of development package LTR2_ES_CHECK in software component CA-LT. This development package consists of objects that can be grouped under "LTR2 Checks on embedded specification".
It is part of development package LTR2_ES_CHECK in software component CA-LT. This development package consists of objects that can be grouped under "LTR2 Checks on embedded specification".
Message Nr ▲ | Message Text |
|---|---|
| 001 | No check executed |
| 002 | Non-existent object '&1' at position '&2' |
| 003 | Position '&1' |
| 004 | Data model '&1' ('&2') |
| 005 | Embedded specification '&1' not found |
| 006 | Cannot determine PCL package for embedded specification '&1' |
| 007 | Loading data model '&1' failed |
| 008 | No check executed: '&1' is not active |
| 009 | You are not authorized to change '&1' |
| 010 | No interface object check: '&1' at position '&2' |
| 011 | No interface object specified for sender system |
| 012 | No interface object specified for receiver system |
| 013 | Interface object '&1' for '&2' does not exist |
| 014 | Interface object '&2' available for sender system |
| 015 | Getting tables failed: '&1' |
| 016 | Setting work context failed: '&1' |
| 017 | Interface object '&2' for table '&1' available for receiver system |
| 018 | &1 |
| 019 | &1 &2 &3 &4 |
| 020 | Getting the receiver interface object failed: '&1' |
| 021 | Field '&1' |
| 022 | Transformation rule ID '&1' |
| 023 | Transformation rule '&1' |
| 024 | Loading transformation rule '&1' failed: '&2' |
| 025 | Getting parameters of transformation rule failed |
| 026 | Specified parameter '&1' does not exist in rule definition |
| 027 | Parameter '&1' supplied with values '&2-&3' |
| 028 | Parameter '&1' supplied with fix value '&2' |
| 029 | Parameter '&1' not supplied |
| 030 | Rule assigned in RAS line '&1', but line ID not found in RAS |
| 031 | Parameter '&1' not defined as optional in RAS line ID '&2' |
| 032 | Rule '&1' assigned to nonexistent table field '&2' |
| 033 | Rule '&1' not in development status 'RELEASED' |
| 034 | Rule parameter '&1' not supplied |
| 035 | No data model check: '&1' at position '&2' |
| 036 | No transformation rules check: '&1' at position '&2' |
| 037 | Rule assignment to table ID '&1', which does not exist in data model '&2' |
| 038 | Rule assignment for table ID '&1' removed |
| 039 | Interface object '&1' describes table '&2', but '&3' required |
| 040 | Changes discarded due to simulation |
| 041 | Changes saved |
| 042 | Starting repair in simulation mode - no changes will be saved |
| 043 | Start repair |
| 044 | No RFC destination to receiver system |
| 045 | No RFC destination to sender system |
| 046 | Table ID '&1' (table '&2') does not exist in data model '&3' |
| 047 | Check preselection coding for table '&1' |
| 048 | Rule name must not be 'MOVE' |
| 049 | Generation state is "Obsolete"; please delete the object |
| 050 | Creating interface object for '&1' using '&2' failed: '&3' |
| 051 | Interface object '&1' created for '&2' as sender |
| 052 | Setting interface object for table '&1' failed: '&2' |
| 053 | Interface object '&1' created for '&2' as receiver |
| 054 | Interface object '&1' cannot be loaded and will be removed |
| 055 | Clearing interface object failed: '&1' |
| 056 | Table '&1' does not exist in '&2' |
| 057 | Table '&1' exists in '&2' |
| 058 | Deactivating table '&1' failed: '&2' |
| 059 | Table '&1' deactivated |
| 060 | No technical selection check: '&1' at position '&2' |
| 061 | Incorrect settings of preselection table '&2' for selection '&1' |
| 062 | Selection '&1' with preselection table settings '&2' |
| 063 | Incremental transformation uses preselection table settings 'SINGLE' |
| 064 | Incremental transformation will use preselection table settings 'SINGLE' |
| 065 | Creating check failed: '&1' |
| 066 | You can only use selection '&1' if no link is active |
| 067 | Selection '&1' requires an active link for table '&2' |
| 068 | Table '&1' is not active |
| 069 | Link from '&1' to '&2' ('&3') |
| 070 | Migration object does not exist |
| 071 | Migration object '&1' |
| 072 | Generation state is equal |
| 073 | Generation state: '&1' |
| 074 | Rule state is equal |
| 075 | Rule state: '&1' |
| 076 | No migration object check: '&1' at position '&2' |
| 077 | No link check: '&1' at position '&2' |
| 078 | Source business object '&1' exists |
| 079 | Source business object does not exist ('&1') |
| 080 | No business object check: '&1' at position '&2' |
| 081 | Business object '&1' |
| 082 | Main business object for data model '&1' does not exist |
| 083 | Source data model '&1' exists (position '&2') |
| 084 | Source data model does not exist ('&1') |
| 085 | Target data model '&1' exists (position '&2') |
| 086 | Target data model does not exist ('&1') |
| 087 | Table '&1' exists in data model '&2' |
| 088 | Table with table ID '&1' does not exist in data model '&2' |
| 089 | Table '&1' is active in data model '&2' |
| 090 | Table '&1' is not active in data model '&2' |
| 091 | Data model '&1' is active |
| 092 | Data model '&1' is not active |
| 093 | Filter '&1' ('&2') is assigned to data model '&3' |
| 094 | Active table '&1' does not exist in sender system |
| 095 | Active table '&1' does not exist in receiver system |
| 096 | Mismatch of table ID for table &1 in data model &2 and link definition &3 |
| 097 | Mismatch of link source context '&1' and position '&2' of data model '&3' |
| 098 | Data model '&1' does not exist at postion '&2' |
| 099 | Active table '&1' does not exist in execution system |
| 100 | Table '&1': No analysis data for receiver system |
| 101 | Table '&1': No analysis data for sender system |
| 102 | Table '&1': No analysis data for execution system |
| 103 | Field '&1' does not exist in interface object of table '&2' |
| 104 | No table with table ID '&1' defined in data model |
| 105 | Different type of filter field '&4' ('&1') and table field '&3' ('&2') |
| 106 | Different length of filter field '&4' ('&1') and table field '&3' ('&2') |
| 107 | DDIC info of filter field '&1' could not be determined |
| 108 | Fields of group '&1' are assigned to different data models or tables |
| 109 | Filter '&1' not yet assigned |
| 110 | Data model '&1' contained in embedded specification |
| 111 | Data model '&1' missing in embedded specification |
| 112 | Check data models |
| 113 | Sub-business object checks |
| 114 | Main business object '&1' exists in BOD |
| 115 | Main business object '&1' does not exist in BOD |
| 116 | No differentiation maintained for sub-business object '&1' |
| 117 | Check differentiation |
| 118 | Differentiation missing for data model '&1' |
| 119 | Table ID '&1' of differentiation not found in data model |
| 120 | Differentiation field '&1' not contained in interface object of '&2' |
| 121 | Differentiation field '&1' contained in '&2' |
| 122 | Table '&1' is active |
| 123 | Loading structure link '&1' failed: '&2' |
| 124 | Deleting structure link '&1' failed: '&2' |
| 125 | Structure link from '&1' ('&2') to '&3' ('&4') deleted |
| 126 | Missing link from table '&1' '&2' (parent position '&4') |
| 127 | Source data model '&1' is not valid; link will be deleted |
| 128 | Source business object '&1' is not valid; link will be deleted |
| 129 | Target data model '&1' is not valid; link will be deleted |
| 130 | Edit mode for embedded specification failed |
| 131 | Data model '&1' added to embedded specification |
| 132 | Adding data model '&1' failed: '&2' |
| 133 | Link could not be removed from the embedded specification: '&1' |
| 134 | Link was removed from embedded specification |
| 135 | Link could not be deleted: '&1' |
| 136 | Link was deleted |
| 137 | Link could not be deactivated: '&1' |
| 138 | Link was deactivated |
| 139 | Link '&1' at position '&2' will be deleted |
| 140 | Link '&1' at position '&2' will be deactivated |
| 141 | No interface object for table '&1' |
| 142 | Field '&1' does not exist in table '&2' |
| 143 | Field '&1' exists in table '&2' |
| 144 | Table '&1' is not active |
| 145 | Table '&1' in data model '&2' does not exist in sender system |
| 146 | Table '&1' in data model '&2' does not exist in receiver system |
| 147 | Link '&1' '&2' (target position '&3') will be inserted |
| 148 | Link could not be added to embedded specification: '&1' |
| 149 | Link was added to embedded specification |
| 150 | Data model '&1' |
| 151 | Table '&1' |
| 152 | Business object '&1' |
| 153 | No filter check: '&1' at position '&2' |
| 155 | Inconsistency in data set 'Technical Selection' |
| 156 | Table '&1' is not in the data model, but selection criteria are stored |
| 157 | Selection criteria for table '&1' removed |
| 158 | Filter '&1' is not allowed for use in data model '&2' |
| 159 | Filter '&1' is not assigned to the embedded specification |
| 160 | Filter '&1' is not assigned to data model '&2' |
| 161 | Filter '&1' is assigned to data model '&2', but not used |
| 163 | Table field '&1' does not exist in '&2' |
| 164 | Rule assignment for field '&1' in '&2' removed |
| 165 | Target data model of link '&1' does not exist |
| 167 | Rule assignment in ES is '&1' and in rule assignment set is '&2' |
| 168 | Rule assignment set with identifier '&1' does not exist |
| 169 | No rule for domain '&1' defined in rule assignment set '&2' |
| 170 | Different rules defined for domain '&1' in ES and in RAS |
| 171 | Transformation rule with identifier '&1' does not exist ('&2') |
| 172 | Transformation rule with identifier '&1' does not exist (RAS) |
| 173 | Parameter &1 does not exist in the definition of rule &2 (RAS seq.no. &3) |
| 174 | Value type of parameter '&1' differs in ES and in RAS |
| 175 | Value of parameter '&1' differs in ES and in RAS |
| 176 | Optional flag of parameter '&1' differs in ES and in RAS |
| 177 | Parameter '&1' of rule '&2' is missing in ES assignment |
| 178 | No rule assigned for domain '&1' in embedded specification |
| 179 | Checking rules for domain '&1' |
| 180 | Checking rule assignment set '&1' |
| 181 | Rule '&2' is assigned to domain '&1' (RAS sequence number '&3') |
| 182 | Rule '&1' (RAS sequence number '&2') missing in rule assignment set '&3' |
| 183 | Different rules defined for data element '&1' in ES and in RAS |
| 184 | Checking rules for data element '&1' |
| 185 | No rule for data element '&1' defined in rule assignment set '&2' |
| 186 | Rule '&2' is assigned to data element '&1' (RAS sequence number '&3') |
| 187 | Assignment is excluded, parameters will not be checked |
| 188 | Checking rules for table field '&1-&2' |
| 189 | No rule for table field '&1-&2' defined in rule assignment set '&3' |
| 190 | Rule '&3' is assigned to table field '&1-&2' (RAS sequence number '&4') |
| 191 | Different rules defined for table field '&1' in ES and in RAS |
| 192 | No rule assigned for table field '&1' in embedded specification |
| 193 | No rule assigned for data element '&1' in embedded specification |
| 194 | Parameter '&1' is defined as table field, but field name not specified |
| 195 | Parameter '&1' is defined as table field, but table name not specified |
| 196 | Source table name of parameter '&1' differs in ES and in RAS |
| 197 | Embedded specification '&1' does not exist |
| 198 | Data model '&1' active, but no active header table exists |
| 199 | No fields for link coding are defined |
| 200 | Analysis data for table '&1' checked |
| 201 | Removing data model '&1' at position '&2' |
| 202 | Data model could not be removed from embedded specification: '&1' |
| 203 | Data model was removed from the embedded specification |
| 204 | Data model '&1' does not belong to business object '&2' |
| 205 | Rule assignment run is up to date. Last run on &1 at &2 |
| 206 | Rule assignment may be out of sync. A new assignment run is required |
| 207 | Number range object '&1' is assigned |
| 208 | No number range object is assigend |
| 209 | '&1' is used in sender system '&2/&3' |
| 210 | '&1' is not used in sender system '&2/&3' |
| 211 | '&1' is used in receiver system system '&2/&3' |
| 212 | '&1' is not used in receiver system '&2/&3' |
| 213 | Setting '&1' must not be set on data models belonging to a sub-BO |
| 214 | Selection '&1' is set, but selection criteria for table '&2' are defined |
| 215 | Selection '&1' is set, but filter criteria for table '&2' are defined |
| 216 | Selection 'COMPL_TAB' is not allowed for incremental transformation |
| 217 | Selection '&1' is set, but preselection coding for table '&2' is defined |
| 218 | IOBT is active; only IOBT methods SLT or IOBT are possible |
| 219 | IOBT method SLT is only possible for selection of complete table |
| 220 | Mismatch of link target context &1 and WSPOS &2 of target data model &3 |
| 221 | No selection criteria defined |
| 222 | Field '&1' is not key field of cluster '&2' |
| 223 | Field '&1' is key field of cluster '&2' |
| 224 | Project management status set to '&1' |
| 225 | Invalid project management status '&1' |
| 226 | No active data model |
| 227 | Mapping for link between data model '&1' and '&2' is missing ('&3') |
| 228 | No filters assigned |
| 229 | Data model is set to selection only. Migration object will not be checked |
| 230 | Table replication without a preselection table |
| 231 | For table replication preselection table setting 'NO' required |
| 232 | Analysis is out of sync with embedded specification - see long text |
| 233 | Error in non-transparent field check '&1' |
| 234 | Number of key fields for table '&1' exceeds the maximum of 16 |
| 235 | No transformation rule check for posting objects |
| 236 | No check: Object is not converted |
| 237 | No transformation rule check for selection-only data models |
| 239 | The data model belongs to another embedded specification ('&1') |
| 240 | No check of incremental OBT settings: '&1' at position '&2' |
| 241 | Filter settings not relevant because selection is '&1' |
| 242 | Table '&1' has an intermediate structure, but no event-based rule found |
| 243 | The assigned event-based rule (ID: '&1') for table '&2' does not exist |
| 244 | Reading type 3 is not allowed for the hierarchical object '&1' |
| 245 | Different receiver table '&1' defined for migration |
| 246 | Wrong interface object (identifies table '&1') |
| 247 | Link mapping from '&1' to '&2' ('&3') |
| 248 | Table '&1' will be deactivated |
| 249 | Unable to determine a system hash from RFC destination '&1' |
| 250 | DMC runtime parameter '&1' not available |
| 251 | DMC runtime parameter '&1' set to '&2' |
| 252 | DMC runtime parameter '&1' set to '&2' ('&3' required) - see long text |
| 253 | Data model '&1' is not flagged for incremental transformation |
| 254 | Table '&1' is not relevant for sub business object '&2' |
| 255 | Data types of fields will be checked |
| 256 | Data type '&1' for field '&2' does not exist in central system |
| 257 | For transformation method '&1', the preselection setting must be '&2' |
| 258 | Transformation method is set to '&1' |
| 259 | Invalid transfer ID for replication |
| 260 | DMC runtime parameter '&1' set to '&2' ('&3' required) - see long text |
| 261 | Transaction MWB has not been activated for use |
| 262 | No MWB data to delete for embedded specification '&1' |
| 263 | Data model '&1' is still in simulation mode |
| 264 | RFC settings in embedded specification and migration subproject differ |
| 265 | Sender RFC destination will be changed from '&1' to '&2' |
| 266 | Receiver RFC destination will be changed from '&1' to '&2' |
| 267 | RFC destinations could not be changed: '&1' |
| 268 | Wrong sender interface object for table '&1' (created for system '&2') |
| 269 | Wrong receiver interface object for table '&1' (created for system '&2') |
| 270 | No preselection check: '&1' at position '&2' |
| 271 | Sequence number differs for task '&2' (type &1) |
| 272 | No preselection settings found for table ID '&1' |
| 273 | More entries found for preselection settings in dataset than in table |
| 274 | Preselection check succesfully passed |
| 275 | Table fields missing from preselection table '&1' |
| 276 | Field '&1' of application table '&2' is missing |
| 277 | Transformation method is not 'MIGRATE'; no migration object check |
| 278 | Collections are not allowed for selection '&1' |
| 279 | Invalid selection fields for table '&1' for selection (position: '&2') |
| 280 | Failed to get tasklist for transformation methode '&1' |
| 281 | Getting the sender interface object failed: '&1' |
| 282 | Source table '&1' does not exist in data model '&2' |
| 283 | Field '&1' does not exist in table '&2' |
| 284 | Source and target table must not differ for complete tables data models |
| 285 | Migration data set not active in embedded specification |
| 286 | Subproject '&2' for embedded specification '&1' not found |
| 287 | Failed to access migration object |
| 288 | Migration object was not generated |
| 289 | Transformation rules of variant type '&1' are not allowed |
| 290 | Objects cannot be maintained; check settings in table T000 |
| 291 | Link belongs to another embedded specification |
| 292 | Different transformation methods for source and target defined |
| 293 | Transformation method could not be determined: '&1' |
| 294 | Transformation method '&1' |
| 295 | Nothing to be checked |
| 296 | Inactive table '&1' is relevant according to the table scope definition |
| 297 | Active table '&1' is not part of the table scope definition |
| 298 | Active table(s) found but not relevant table in table scope definition |
| 299 | Table '&1' is missing regarding the table scope definition |
| 300 | No transformation methods maintained |
| 301 | No table scope definition available for transformation method '&1' |
| 302 | All active tables contained in the table scope definition |
| 303 | All tables in the table scope definition are active |
| 304 | Check tables in embedded specification against the table scope definition |
| 305 | Check table scope definition against tables in embedded specification |
| 306 | Table scope definition exists but no active tables found |
| 307 | No data model at position '&1' |
| 308 | Collection found for table '&1' ('&2') from position '&3' ('&4') |
| 309 | Table ID '&1' does not exist |
| 310 | Table '&1' ('&2') is active |
| 311 | Table '&1' ('&2') is not active |
| 312 | Collections are only allowed for root tables; invalid table '&1' ('&2') |
| 313 | Table ID '&1' does not contain a field '&2' |
| 314 | Data model does not contain a table with ID '&1' |
| 315 | No filters or selection criteria defined |
| 316 | Filter '&1' found for table '&2' ('&3') on field '&4' |
| 317 | Filter '&1' found for table ID '&2' on field '&3' |
| 318 | Invalid selection fields for table ID '&1' (position '&2') |
| 319 | Transformation method '&1' is not valid |
| 320 | For selection '&1', the preselection table setting must be '&2' |
| 321 | Exception occurred: '&1' |
| 322 | End of check |
| 323 | Check collection assignments |
| 324 | Check external links |
| 325 | Check filter assignments |
| 326 | Check number of key fields |
| 327 | Check preselection coding |
| 328 | Check preselection settings |
| 329 | Check selection criteria |
| 330 | Check transformation method |
| 331 | The assigned filter does not exist |
| 332 | Check for recursivly linked data models without entry point |
| 333 | Recursive cycle detected in data models |
| 334 | No recursive cycle detected in data models |
| 335 | Parent data model of link '&1' does not exist at position '&2' |
| 336 | Target data model of link '&1' does not exist at position '&2' |
| 337 | Link '&1' at position '&2' does not exist anymore |
| 340 | Sharing type of table '&2' is '&1'; no changes allowed |
| 341 | Sharing type of deviating target table '&2' is '&1'; no changes allowed |
| 342 | No info about table '&1' in the OBT analysis |
| 350 | No tables found in embedded specification &1 |
| 351 | No analysis data found for embedded specification &1 |
| 352 | Classification of table &1 is not unique |
| 353 | Table &1 is classified 'In scope' but not active in ES |
| 354 | Table &1 is classified 'Out of scope' but is active in ES |
| 356 | TSD was applied, but health check could not be started |
| 357 | Fallback rule assigned to &1-&2 at position &3 |
| 358 | Fallback rule was assigned, but health check could not be performed |
| 360 | ES parameter '&1' used in selection criteria does not exist |
| 370 | Product '&1' of system '&2' is assigned to data model |
| 371 | Product '&1' of system '&2' is not assigned to data model |
| 372 | Assigend product '&1' is a valid product |
| 373 | Assigned product '&1' is not a valid product |
| 402 | Setting selection to '&1' |
| 403 | Deleting collection '&1' from '&2' |
| 405 | Filter assignment will be deleted |
| 406 | Preselection table changed to '&1' |
| 407 | Transfer method '&1' is active |
| 408 | No tasks were found |
| 409 | Checking table &1 |
| 410 | No preselection table for table &1 |
| 411 | Check registration for preselection table &1 |
| 412 | Check preselection table &1 in remote system |
| 413 | Check failed: &1 |
| 414 | Starting to update preselection registration |
| 415 | Failure at function module &1 |
| 416 | No authorization to execute function module &1 |
| 417 | No RFC-Destination to sender system - no tables filled |
| 418 | Executed in simulation mode: no changes done |
| 419 | Error while executing batch job |
| 420 | Function module &1 successfully executed |
| 421 | Selection is set to '&1' |