LTR2_RN - LTR2 RN: Message class
The following messages are stored in message class LTR2_RN: LTR2 RN: Message class.
It is part of development package LTR2_RN in software component CA-LT. This development package consists of objects that can be grouped under "LTR2 Renumbering".
It is part of development package LTR2_RN in software component CA-LT. This development package consists of objects that can be grouped under "LTR2 Renumbering".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1&2&3&4 |
| 001 | Mapping not built due to unavailable analysis |
| 002 | Renumbering GUID: &1 |
| 003 | Mapping is built |
| 004 | The analysis is already assigned to renumbering project &1 |
| 005 | Default mapping mode: &1 |
| 006 | No steps added to step list |
| 007 | The old value &1 is already assigned to different new value &2 |
| 008 | No steps added as the context has no step list |
| 009 | Default tolerance offset: &1 |
| 010 | Step '&1' added: time slot '&2', target system '&3', execution mode '&4' |
| 011 | Invalid number range object &1 |
| 012 | Step '&1' not added to the step list |
| 013 | Invalid mapping mode '&1' |
| 014 | Invalid adjustment mode '&1' |
| 015 | Error entries not set into configuration |
| 016 | Header information of object &1 missing in current system |
| 017 | Creating renumbering project failed due to invalid WS GUID '&1' |
| 018 | Creating renumbering project failed due to invalid context type '&1' |
| 019 | Creating analysis failed |
| 020 | Adding steps of renumbering failed |
| 021 | Configuration of renumbering project changed |
| 022 | Renumbering is executed with check for incompatible NR objects |
| 023 | Renumbering is executed without check for incompatible NR objects |
| 024 | Invalid mapping values have been ignored |
| 025 | Mappings added for inconsistent numbers |
| 026 | Unable to attach analysis to renumbering correctly |
| 027 | No authorization to create renumbering project |
| 028 | Renumbering project &1 already exists for the passed context |
| 029 | Analysis created |
| 030 | Steps of renumbering added to step list |
| 031 | Renumbering project created with GUID '&1' |
| 032 | Context type: &1 |
| 033 | Description: &1 |
| 034 | Build mapping scheduled successfully |
| 035 | Number range object &1 not changed as mapping results are already built |
| 036 | Number range object &1 not changed as it contains manual changes |
| 037 | Number range object &1 not changed as mapping results are already used |
| 038 | Configuration of number range objects not changed |
| 039 | Number range object &1 added |
| 040 | Number range object &1 changed |
| 041 | Number range object &1 removed |
| 042 | Number range objects removed |
| 043 | Number range objects not removed |
| 044 | Number range objects not changed |
| 045 | Number range objects changed |
| 046 | Number range objects added |
| 047 | Default adjustment mode: &1 |
| 048 | No renumbering project found for embedded specification &1 |
| 049 | No renumbering project found for analysis &1 |
| 050 | Analysis, comparison and check finished |
| 051 | Need clean previous results |
| 052 | Do not clean previous results |
| 053 | Number range objects updated |
| 054 | Mapping mode '&1' doesn't support setting tolerance offset, value cleared |
| 055 | Mapping mode changed to '&2' from '&1' |
| 056 | Adjustment mode changed to '&3&4' from '&1&2' |
| 057 | Tolerance offset changed to '&2' from '&1' |
| 058 | Mapping mode: &1 |
| 059 | Adjustment mode: &1 |
| 060 | Tolerance offset: &1 |
| 061 | Context information and renumbering GUID is missing |
| 062 | Add number range interval is not supported |
| 063 | Duplicated number range object &1 |
| 064 | Number range object &1 already exists |
| 065 | Invalid number range subobject &1 |
| 066 | Invalid number range number '&1' |
| 067 | Set number range settings in object level only |
| 068 | Set number range settings in interval level only |
| 069 | Number range objects will be identified automatically |
| 070 | Duplicated number range intervals |
| 071 | Number range objects will not be identified automatically |
| 072 | Cloning failed due to invalid analysis of the source renumbering project |
| 073 | Number range intervals not changed |
| 074 | Number range intervals changed |
| 075 | Number range object &1 does not exist |
| 076 | The following intervals not changed as mapping results are already built |
| 077 | The following intervals not changed as they contain manual changes |
| 078 | The following intervals not changed as mapping results are already used |
| 079 | NR interval '&1' for fiscal year '&2' of object &3, sub object &4 |
| 080 | Mapping settings changed |
| 081 | Analyze application tables: &1 |
| 082 | Invalid tolerance offset '&1' |
| 083 | Number range object &1 cannot be added |
| 084 | Auto create: &1 |
| 085 | Identify number range objects from migration tables |
| 086 | Identify number range objects from analyzed tables |
| 087 | All data has been cleaned before execution |
| 088 | Previous results will not be cleaned during execution |
| 089 | &1 intervals detected as incompatible, see details in monitor |
| 090 | Cloning failed as source renumbering project is a copied project |
| 091 | Adjustment value: '&1' |
| 092 | Adjustment value '&1' is outside the valid value range |
| 093 | Valid adjustment value range is to '&2' from '&1' |
| 094 | Mapping has been built using mapping mode '&1' |
| 095 | No renumbering project found for context type '&1', context ID '&2' |
| 096 | Check failed as cloning renumbering project failed |
| 097 | Check failed as analysis failed |
| 098 | Incompatible intervals found; see detailes in monitor |
| 099 | Renumbering check finished without errors |
| 100 | Adjustment information cannot be changed for the external number range |
| 101 | Adjustment value cannot be changed when adjustment mode is "&1" |
| 102 | Starting to check validity of mappings |
| 103 | The renumbering project is in process |
| 104 | Check between source project and clone project failed |
| 105 | Starting to re-analyze in remote systems |
| 106 | No authorization to adjust level in receiver system |
| 107 | System failure during adjusting level in receiver system |
| 108 | Cleaning previous check result and align with current settings |
| 109 | Process started in background, check status in Technical Information |
| 110 | Re-process started in background, check status in Technical Information |
| 111 | Mapping results built for selected intervals |
| 112 | Re-process finished |
| 113 | Build mapping started in background,check status in Technical Information |
| 114 | Automatically identified number range objects will be cleaned |
| 115 | Update number range objects to analysis configuration |
| 116 | Number range objects updated to analysis failed: &1 |
| 117 | Log message for invalid number: &1 |
| 118 | Handler for invalid number: &1 &2 |
| 119 | Invalid handler: &1 |
| 120 | Parameter missing for invalid number handler: &1 |
| 121 | Parameter '&2' not needed and cleaned for invalid number handler: &1 |
| 122 | Handler parameter '&1' is invalid |
| 123 | Number '&1' of sub object '&2' year '&3' is non-numeric |
| 124 | Interval '&4' for number '&1' of sub object '&2' year '&3' is invalid |
| 125 | No interval can be used for number '&1' of sub object '&2' year '&3' |
| 126 | Mapping failed on interval '&4' for number '&1' sub object '&2' year '&3' |
| 127 | Exception raised for invalid numbers of number range object &1 |
| 128 | Original number returned for invalid numbers of number range object &1 |
| 129 | Fixed offset '&2' added for invalid numbers of number range object &1 |
| 130 | Interval '&2' used for invalid numbers of number range object &1 |
| 131 | Interval '&4' used for number '&1' of sub object '&2' year '&3' |
| 132 | Handler parameter is missing |
| 133 | Handler '&1' is invalid |
| 134 | NR object '&1' |
| 135 | Invalid numbers of table '&1' |
| 136 | The old value &1 is assigned to the new value &2 |
| 137 | The new value &1 is already occupied by some old values |
| 138 | All old values assigned to the new value &1 after edit |
| 139 | Number '&1' of sub object '&2' fiscal year '&3' |
| 140 | Nearest interval used for invalid numbers of number range object &1 |
| 141 | The assigned new value &1 is removed from the old value &2 |
| 142 | Errors caused by invalid numbers for number range object &1 were ignored. |
| 143 | Errors caused by invalid numbers of table &1 were ignored |
| 144 | &1 is out of the interval number range |
| 145 | Old value: &1 |
| 146 | The following number range objects reprocessed |
| 147 | Changes are not applied due to they are invalid |
| 148 | Changes are not applied in simulation mode |
| 149 | The error configuration not saved |
| 150 | &1 is not numeric |
| 151 | The new value &1 is already used in receiver system |
| 152 | Mapping has not been built, no number range object is going to be checked |
| 153 | Invalid mapping results found in recheck; see detailes in monitor |
| 154 | Mapping results recheck finished without errors |
| 155 | Mapping results recheck finished with warnings; see details in monitor |
| 156 | Interval '&1' of NR object '&2' is incompatible |
| 157 | Interval '&1' of subobject '&2' of NR object '&3' is incompatible |
| 158 | Interval '&1' of subobj '&2' year '&3' of NR object '&4' is incompatible |
| 159 | Project settings changed |
| 160 | The invalid numbers are set to be logged |
| 161 | The object is set to be created in receiver system |
| 162 | The invalid numbers are not going to be logged |
| 163 | The object is not going to be created in receiver system |
| 164 | Application table is set to be analyzed |
| 165 | Application table is not going to be analyzed |
| 166 | Handler of invalid numbers changed to '&2' from '&1' |
| 167 | Number range object &1 |
| 168 | Number range objects not added due to errors |
| 169 | Number range objects not updated due to errors |
| 170 | Number range intervals not updated due to errors |
| 171 | Adjust value changed to '&2' from '&1' |
| 172 | Interval '&1' of year '&2' of NR object '&3' is incompatible |
| 173 | No simulation executed for NR objects with adjustment mode '&1' |
| 174 | Interval '&1' |
| 175 | Receiver level '&1' equals adjust value, adjustment is not required |
| 176 | Receiver level '&1' is greater than adjust value '&2', &3 |
| 177 | Receiver level is adjusted to '&1' |
| 178 | No changes happened in receiver system due to simulation |
| 179 | Intervals cannot be adjusted, because no header table or field found |
| 180 | Receiver level is greater than adjust value, adjustment can't be executed |
| 181 | Receiver level equals adjust value, adjustment is not required |
| 182 | Error detected during finalization of adjust value, adjustment skipped |
| 183 | Exclusion: &1 |
| 184 | Exclusion(s) added |
| 185 | Exclusion(s) removed |
| 186 | Extended value changed from '&1' to '&2' |
| 187 | Tolerance offset changed to '&2' from '&1' |
| 188 | Identified NR objects meeting following patterns are going to be excluded |
| 189 | Previous adjustment status cleared |
| 190 | Map offset changed to '&1' from '&2' |
| 191 | Maximum used value changed to '&1' from '&2' |
| 192 | Check status changed to '&1' from '&2' |
| 193 | Map result changed to '&1' from '&2' |
| 194 | Mapping value pairs will be cleared |