M3 - Material Master
The following messages are stored in message class M3: Material Master.
It is part of development package MG in software component LO-MD-MM. This development package consists of objects that can be grouped under "Application development R/3 material master prior to 3.0".
It is part of development package MG in software component LO-MD-MM. This development package consists of objects that can be grouped under "Application development R/3 material master prior to 3.0".
Message Nr ▲ | Message Text |
|---|---|
| 001 | No changes made |
| 002 | No data input possible |
| 003 | No changes possible (no true batch management) |
| 004 | The alternative units of measure are inconsistent |
| 005 | Position the cursor on a selection field |
| 006 | Deletion flags changed |
| 007 | Deletion flags also changed at lower levels |
| 008 | Material flagged for deletion |
| 009 | No materials with zero stock |
| 010 | Selection of a blank line is not defined |
| 011 | Position the cursor on the required line |
| 012 | The selected materials have been processed |
| 013 | Choose the materials you want to extend |
| 014 | Tax category & does not define classification & |
| 015 | Maintain the tax classifications |
| 016 | Specify the industry sector since you want it to be hidden |
| 017 | Maintain the forecast data |
| 018 | Enter the forecast data for the new MRP type |
| 019 | Tax category &2 is not defined for country/region &1 |
| 020 | Material & is locked by the user & |
| 021 | A system error has occurred while locking |
| 022 | The group data for the material & is locked by & |
| 023 | Plant data is locked by the user & |
| 024 | Valuation data for material & is locked by the user & |
| 025 | WM data for material & is locked by the user & |
| 026 | Sales data for material & is locked by the user & |
| 027 | & cannot be used as alt. unit since resulting unit would be too long |
| 028 | Alternative units of measure have been checked and corrected |
| 029 | Material & in plant & is being processed |
| 030 | Review |
| 031 | Material & in plant & not handled successfully |
| 032 | Actions performed to change MRP profile & |
| 033 | Actions performed to delete MRP profile & |
| 034 | Actions performed to change forecast profile & |
| 035 | Actions performed to delete forecast profile & |
| 036 | Nec. tax categories still missing, for example, & |
| 037 | No taxes maintainable for & - will be skipped |
| 038 | Tax cat. & no longer maintainable when mat. extended |
| 039 | Countries still missing, for example, & |
| 040 | No consumption values possible for period & |
| 041 | Error in extending consumption values for period & |
| 042 | Period & does not exist |
| 043 | Fiscal year variant & does not exist |
| 044 | Invalid week in period & |
| 045 | Error in comparing total consumption with unplanned consumption |
| 046 | First define the valuation level in Customizing |
| 047 | The necessary plant data does not exist for the material |
| 048 | Fiscal year variant reset since unnecessary with this period indicator |
| 049 | Enter a fiscal year variant |
| 050 | You are changing the period ind. although consumption already maintained |
| 051 | You are changing the period indicator although forecast values maintained |
| 052 | Consumption values already exist for period ind./fiscal yr variant & & |
| 053 | Consumption values already exist for fiscal year variant & |
| 054 | Plant & is not assigned to company code & |
| 055 | The data you require does not exist for material & in plant & |
| 056 | Required data for material & not in company code & |
| 057 | Required data for material & does not exist in plant & |
| 058 | Required data for material & does not exist in valuation area & |
| 059 | Data does not exist for reference material & in plant & |
| 060 | Reference material & does not exist in company code & |
| 061 | Material flagged for deletion |
| 062 | Valuation data flagged for deletion |
| 063 | Accounting data not maintained for reference material & in plant & |
| 064 | Reference material & does not exist in valuation area & |
| 065 | Plant & belongs to company code & |
| 066 | Set the "LIFO-relevant" indicator or reset the LIFO pool |
| 067 | Maintenance of LIFO data valid for the entire company code |
| 068 | Pool number & is not defined |
| 069 | Enter the MRP controller |
| 070 | Enter the scheduling margin key |
| 071 | Enter the lot size (materials planning) |
| 072 | Enter the MRP type |
| 073 | No materials planning: all relevant MRP fields will be reset |
| 074 | Splitting indicator reset since unnecessary with this MRP type |
| 075 | Service level reset since unnecessary with this MRP type |
| 076 | & possible only as a default value in the MRP profile |
| 077 | Storage costs indicator & is not defined in any plant |
| 078 | Scheduling margin key & is not defined in any plant |
| 079 | Splitting indicator requires MRP type in profile |
| 080 | Service level requires MRP type in profile |
| 081 | Choose another MRP type since the profile contains a splitting indicator |
| 082 | Choose another MRP type since the profile contains a service level |
| 083 | Splitting indicator & not defined in any plant |
| 084 | The fiscal year variant requires a period indicator in the profile |
| 085 | Since fiscal yr variant in profile, set period ind. to "planning period" |
| 086 | Reorder point calculated automatically so may not be fixed in profile |
| 087 | Safety stock calculated automatically so may not be fixed in profile |
| 088 | With MRP type "No planning", profile may not include planning fields |
| 089 | Specify the relevant base quantity |
| 090 | Specify the relevant unit of weight |
| 091 | & not a valid unit of weight |
| 092 | Specify the relevant unit of volume |
| 093 | & not a valid unit of volume |
| 094 | Specify the relevant time unit |
| 095 | & is not a time unit |
| 096 | Splitting ind. & not defined in any plant for period ind. & |
| 097 | The MRP type requires you to specify a planning time fence |
| 098 | Enter a material type |
| 099 | Enter an industry sector |
| 100 | Transaction & not defined; check your entry |
| 101 | Transaction text & for language & not in table TSTCT |
| 102 | Plant & does not exist |
| 103 | Storage location & does not exist in plant & |
| 104 | The material type & does not exist |
| 105 | No text exists for material type & in language & |
| 106 | The industry sector & does not exist |
| 107 | No text exists for industry sector & in language & |
| 108 | Transaction control error |
| 109 | The MRP profile & does not exist |
| 110 | The MRP type & does not exist |
| 111 | MRP text does not exist for argument & & |
| 112 | Previously reserved material number may not remain unfilled |
| 113 | Transaction control error |
| 114 | Transaction control error |
| 115 | Transaction control error |
| 116 | Transaction control error |
| 117 | Transaction control error |
| 118 | Sales organization & does not exist |
| 119 | Costing selection cancelled (not maintainable per valuation type) |
| 120 | Enter an MRP profile or MRP type |
| 121 | Enter the new MRP data |
| 122 | Distribution channel & does not exist |
| 123 | Plant &: material type & not maintained here |
| 124 | Transaction control error |
| 125 | Profile data copied from material master record |
| 126 | Profile copied from reference material |
| 127 | The purchasing value key & does not exist |
| 128 | Check the data for the purchasing value key |
| 129 | The valuation class & does not exist |
| 130 | Fiscal year variant & does not exist |
| 131 | With price control V, enter a moving average price |
| 132 | With price control S, enter a standard price |
| 133 | Forecast values deleted with forecast model & |
| 134 | "Valid from" date only defined in conjunction with status |
| 135 | Valuation type & & not defined |
| 136 | Enter a positive integer as the price unit |
| 137 | The new price unit causes rounding errors in the standard price |
| 138 | Future price 0 not allowed (date will be reset) |
| 139 | Enter a validity date |
| 140 | The prices for the new price unit cannot be determined |
| 141 | Warehouse number & does not exist |
| 142 | Description of warehouse number & does not exist |
| 143 | Warehouse number & has no storage type & |
| 144 | Description of storage type & does not exist |
| 145 | No forecast possible with forecast model & |
| 146 | Text in language & does not exist for view & |
| 147 | No view & for industry sector ref. & and mat. type ref. & |
| 148 | Price unit not allowed since valuation price would be zero |
| 149 | Screen & not in table T130D |
| 150 | The company code & does not exist or has not been fully maintained |
| 151 | Valuation type & does not match valuation category & |
| 152 | Company code & is not set up for Materials Management |
| 153 | Valuation area & does not exist (table T001K) |
| 154 | Consumption only maintainable if period indicator entered |
| 155 | Prices have been recalculated |
| 156 | No consumption values exist |
| 157 | Future price is zero ("valid from" date will be reset) |
| 158 | The valuation price of the material is zero |
| 159 | Validity date is in the past |
| 160 | Price control cannot be changed (cost component split exists) |
| 161 | Date values must be in ascending order |
| 162 | No consumption values exist for the combination material/plant |
| 163 | Enter a material and plant |
| 164 | Enter a plant |
| 165 | Transaction control error |
| 166 | For this ref. mat. only & consumption periods maintained |
| 167 | Field overflow with corrected consumption value |
| 168 | Consumption values already created |
| 169 | The factory calendar's lower limit does not extend this far |
| 170 | The factory calendar's upper limit does not extend this far |
| 171 | Factory calendar & not found in table T001W |
| 172 | Consumption values already exist for period indicator & |
| 173 | Date & invalid |
| 174 | Field selection string for procurement type & not in table T130A |
| 175 | Text does not exist in language & |
| 176 | The net weight is greater than the gross weight |
| 177 | "To date" is in the future |
| 178 | "From date" is later than "To date" |
| 179 | "From date" precedes the lower limit of the factory calendar |
| 180 | Valuation class & not allowed for material type & |
| 181 | Valuation class & not allowed for valuation type & |
| 182 | You are changing material type from & to & |
| 183 | Material type changed |
| 184 | Individual batch valuation not possible here; choose "Display errors" |
| 185 | Only price control "V" is possible for split valuation |
| 186 | Forecast profile &1 does not exist |
| 187 | The units of measurement require the same dimension (T006) |
| 188 | You are changing the base unit of measure from & to & |
| 189 | The base unit of measure cannot be changed; choose "Display errors" |
| 190 | Valuation category & & missing |
| 191 | Valuation category & does not allow split valuation |
| 192 | First create the valuation-type-independent data |
| 193 | Valuation category & not allowed for valuation area & |
| 194 | The valuation category cannot be changed; choose "Display errors" |
| 195 | No selectable view exists |
| 196 | Select at least one view |
| 197 | Function not possible due to maintenance control |
| 198 | Description of sales organization & does not exist |
| 199 | Description of distribution channel & does not exist |
| 200 | Material & does not exist in plant & |
| 201 | No batches are possible for material & in plant & |
| 202 | Unit of issue cannot be changed (material used as prod. resource/tool) |
| 203 | Field selection string for plant cannot be determined |
| 204 | Batch & already exists in plant & |
| 205 | Batch & does not exist in plant & |
| 206 | Material & does not exist in storage location & of plant & |
| 207 | Batch & already exists in storage location & |
| 208 | Batch & does not exist in plant & |
| 209 | Batch & does not exist in storage location & |
| 210 | Transaction code & not in table T148M |
| 211 | Consignment price data already exists |
| 212 | Batch cannot be used without storage location (will be reset) |
| 213 | Field selection string for transaction does not exist |
| 214 | The unit of issue cannot be changed because the material is used in a BOM |
| 215 | Consignment price data does not exist |
| 216 | Consignment data already exists for storage location & |
| 217 | Field selection string for plant does not exist |
| 218 | Consignment stock for stge loc. & does not exist yet |
| 219 | If you do not enter a batch, the storage location will be reset |
| 220 | Master record already exists |
| 221 | Master record does not exist |
| 222 | Valuation type cannot be changed (valuated stock already exists) |
| 223 | Valuation type cannot be changed since physical inventory running |
| 224 | Note: all company codes will be taken into account |
| 225 | Table T148M incorrectly maintained for & |
| 226 | No text for special stock indicator & in table T148T |
| 227 | Enter one of the specified special stock indicators |
| 228 | Special stock indicator & not defined |
| 229 | Enter a batch number |
| 230 | Supplier number will be reset |
| 231 | Field selection string for special stock does not exist |
| 232 | Batch number will be reset |
| 233 | Enter a storage location |
| 234 | Storage location will be reset |
| 235 | Enter a supplier number |
| 236 | Special stock created |
| 237 | Special stock changed |
| 238 | Material & does not exist |
| 239 | Supplier & does not exist |
| 240 | Customer & does not exist |
| 241 | The material must be managed in batches; enter a batch number |
| 242 | Entry & meaningless for this transaction/event |
| 243 | Segment & does not exist for combination entered |
| 244 | No storage-location-specific data exists |
| 245 | No plant-specific data exists |
| 246 | Storage location reset (irrelevant here) |
| 247 | Plant reset (irrelevant here) |
| 248 | Plant/storage location reset (irrelevant here) |
| 249 | Organizational levels for material reset |
| 250 | Storage location already exists; correct your entry or it will be ignored |
| 251 | Ref. stge location does not exist; correct your entry or it will be reset |
| 252 | Storage location does not exist (correct, or entry will be ignored) |
| 253 | Storage loc. & deleted |
| 254 | Storage location & already exists and cannot be deleted |
| 255 | Specify an organizational level |
| 256 | Irrelevant key fields for reference material reset |
| 257 | Tables T131A, T131V, and T130D not maintained consistently |
| 258 | No segments for selected key term |
| 259 | Screen & must be included in table T130D |
| 260 | Plant & does not have maint. status & |
| 261 | Version & not in table T138B |
| 262 | Enter a material number |
| 263 | Only enter storage location if plant also entered |
| 264 | Only enter storage type if warehouse no. also entered |
| 265 | No revision levels exist for the material |
| 266 | Use TJ91 as the reference transaction code |
| 267 | Consumption values only maintainable if plant specified |
| 268 | No consumption values exist |
| 269 | No entry for key & & in table T131C |
| 270 | Function not defined for use here |
| 271 | Function not defined for use here |
| 272 | Screen & skipped (no entries possible) |
| 273 | No entry for change code & in table T131V |
| 274 | These two indicators cannot be set simultaneously |
| 275 | MRP profile & created |
| 276 | No entry for transaction code & in table T401M |
| 277 | MRP profile &1 does not exist |
| 278 | MRP profile & already exists |
| 279 | Description missing for MRP profile & |
| 280 | Reference profile & does not exist |
| 281 | Enter an MRP profile |
| 282 | MRP controller & is not defined in plant & |
| 283 | MRP controller & not defined as buyer |
| 284 | Planned delivery time is 0 for ext. procured material |
| 285 | In-house production time is 0 for material produced in-house |
| 286 | Reorder level lower than safety stock |
| 287 | Lot size (materials planning) & is not defined |
| 288 | Mat. type & does not allow optimum lot-sizing procedures |
| 289 | The lot-sizing procedure requires a fixed lot size |
| 290 | Lot-sizing procedure needs max. stock level to be specified |
| 291 | "Fixed lot size" reset since unnecessary for this procedure |
| 292 | "Maximum stock level" reset since unnecessary for this procedure |
| 293 | Minimum lot size, maximum lot size, and rounding value reset |
| 294 | Minimum lot size may not be greater than maximum lot size |
| 295 | Maximum lot size may not be smaller than rounding value |
| 296 | You have not assigned an MRP group to the material |
| 297 | Specify a reorder point and replenishment quantity |
| 298 | Factory calendar not fully maintained |
| 299 | Min. lot size and max. lot size reset (unnecessary here) |
| 300 | Check your entries |
| 301 | The date is in the future; check your entry |
| 302 | Enter an MRP type since it cannot be derived from the profile |
| 303 | No active screen (e.g. material not maintained here) |
| 304 | Reference material does not exist |
| 305 | The material & does not exist or is not activated |
| 306 | No access routine programmed for table & |
| 307 | Material already maintained for this transaction/event |
| 308 | Material not fully maintained for this transaction/event |
| 309 | Material type & and industry & copied from master record |
| 310 | Material type & copied from master record |
| 311 | Industry & copied from master record |
| 312 | You are working with an incorrectly maintained user master record |
| 313 | Reference material not yet maintained for this transaction/event |
| 314 | Reference material not created in full |
| 315 | Invalid function key |
| 316 | No materials selected |
| 317 | No external number assignment possible for mat. type & |
| 318 | Number & not defined for material type & |
| 319 | Internal number assignment is not possible for the material type & |
| 320 | Very few numbers left |
| 321 | Description already exists in language & |
| 322 | Assigned number & is the last available number |
| 323 | Enter a language |
| 324 | Enter a text for the language |
| 325 | Enter at least one description |
| 326 | Enter a language and a text |
| 327 | Operation not possible (e.g. incorrect material type or plant) |
| 328 | & not selectable here since data not yet created |
| 329 | & not selectable here (data already created) |
| 330 | Old and new material types are the same |
| 331 | Unit of measure & already exists |
| 332 | The alternative unit of measure is the same as the base unit of measure |
| 333 | Specify the conversion factors for the unit of measure & |
| 334 | Unit of measure & does not exist |
| 335 | Unit of measure group & does not exist |
| 336 | Unit of measure & used as alternative unit |
| 337 | Conversion factors for alt. units already exist; make sure you check them |
| 338 | "Replenish to max. stock level" supported only for reorder point planning |
| 339 | Choose a unit of measure |
| 340 | Material & does not exist at group level |
| 341 | EAN/packaging data already maintained for base unit of measure |
| 342 | Unit of measure & is still used (deletion not possible) |
| 343 | No entry for program name & in table T130S |
| 344 | Choose one option only |
| 345 | The last unit of measure has already been reached |
| 346 | The first unit of measure has already been reached |
| 347 | EAN already used for unit of measure & of this material |
| 348 | The EAN & is already used for the material & |
| 349 | EAN/packaging data copied from reference although base unit changed |
| 350 | Descr. of material & not maintained |
| 351 | Material & not maintained in plant & |
| 352 | Material & in SLoc & of plant & not maintained |
| 353 | Unit of measure & not maintained for material & |
| 354 | Valuation & & not maintained for material & |
| 355 | Sales org. & dist. channel & not maintained for mat. |
| 356 | Ref. material & not maintained for stge loc. & in plant & |
| 357 | Ref. material & not maintained in plant & |
| 358 | Segment & in ref. material & does not exist |
| 359 | OK code & not allowed here |
| 360 | Last screen reached; save your data |
| 361 | Warehouse no. & not maintained for material & |
| 362 | Stge type & f. whse no. & not maintained f. material |
| 363 | No further key for the chosen transaction/event |
| 364 | The material already exists and will be extended |
| 365 | No org. levels exist for this screen |
| 366 | Whse no. & not maintained for reference mat. & |
| 367 | Stor.type & whse no. & not maintained for ref. mat. & |
| 368 | The valuation class cannot be changed, choose 'Display error' |
| 369 | OK code & not possible (change code selection) |
| 370 | Reference unit cannot be copied (new base unit &) |
| 371 | Batch & not maintained |
| 372 | Final screen reached |
| 373 | Maximum stock may not be smaller than minimum stock |
| 374 | Master batch for batch & not maintained |
| 375 | Combination of plant & and material type & does not exist |
| 376 | Plant & does not match valuation area & (value reset) |
| 377 | Valuation type & & not maintained for material |
| 378 | Valuation area copied from plant |
| 379 | Plant & does not match company code & (value reset) |
| 380 | Specified material already assigned to material type & |
| 381 | Enter a valid year |
| 382 | Previous period does not match current period |
| 383 | Last period of previous year does not match current period |
| 384 | Material not in sales org. & distrib. channel & |
| 385 | Reference material not in sales org. & distr. channel & |
| 386 | & not active for the organizational level |
| 387 | & cannot be chosen here; if possible, enter the organizational level |
| 388 | Company code copied from plant |
| 389 | Material & already exists |
| 390 | Enter the reminder levels in ascending order |
| 391 | No possible entries displayable here |
| 392 | Special procurement key & not defined in plant & |
| 393 | With special procurement &, use procurement type F |
| 394 | & do not exist for this material |
| 395 | Specify the relevant unit of length |
| 396 | & is not a unit of length |
| 397 | Conversion may not be changed for base unit of measure |
| 398 | Material type & no longer defined |
| 399 | Classification not defined for material type & of this material |
| 400 | "From plant" greater than "To plant" |
| 401 | "From storage location" greater than "To storage location" |
| 402 | "From batch number" greater than "To batch number" |
| 403 | Special stock indicator & not defined |
| 404 | Display version & is not defined |
| 405 | Period is inconsistent |
| 406 | The costing lot size must not be smaller than the price unit |
| 407 | Enter a valuation class |
| 408 | Valuation area & for material & not maintained |
| 409 | Company code & for material & not maintained |
| 410 | Profit center & not defined |
| 411 | Profit center & not defined in plant |
| 412 | Error in checking profit center & |
| 413 | Costing lot size will be the same as the price unit |
| 414 | Competitor & not defined |
| 415 | Check the product hierarchy for each sales organization |
| 416 | General product hierarchy for material proposed |
| 417 | General product hierarchy has different value: & |
| 418 | Serial numbers already assigned to this material |
| 419 | Serial numbers can be managed only if base unit of measure is discrete |
| 420 | The configurable material does not exist |
| 421 | Lot-sizing procedure requires storage costs indicator |
| 422 | Storage costs indicator reset (not needed here) |
| 423 | Reorder level requires MRP type |
| 424 | Fixed lot size requires lot size (materials planning) |
| 425 | Maximum stock level requires lot size (materials planning) |
| 426 | Fixed lot size and maximum stock level not possible in a single profile |
| 427 | Fixed lot size and rounding value not possible in a single profile |
| 428 | Fixed lot size and minimum lot size not possible in a single profile |
| 429 | Fixed lot size and max. lot size not possible in a single profile |
| 430 | Max. stock level and storage costs ind. not possible in a single profile |
| 431 | Fixed lot size and stor. costs indicator not possible in a single profile |
| 432 | Profile contains the reorder point; choose an appropriate MRP type |
| 433 | MRP controller & not defined in any plant |
| 434 | Planned delivery time is zero |
| 435 | In-house production time is zero |
| 436 | Use the lot-sizing procedure with "fixed lot size" |
| 437 | Use the lot-sizing procedure with "maximum stock level" |
| 438 | Use an optimum lot-sizing procedure since storage costs |
| 439 | Specify the reorder point for reorder point planning |
| 440 | Reorder point considered only with reorder point or time-phased planning |
| 441 | MRP profile & changed; background job has been scheduled |
| 442 | Profile & deleted when you press Enter |
| 443 | MRP profile & has been deleted; background job has been scheduled |
| 444 | New profile the same as old profile |
| 445 | The MRP profile will be reset when you choose Enter |
| 446 | Ordering costs reset since not optimum lot size |
| 447 | Ordering costs/storage costs indicator reset since unnecessary here |
| 448 | Specify ordering costs |
| 449 | Ordering costs require lot size (materials planning) |
| 450 | Storage costs indicator requires lot size (materials planning) |
| 451 | Maximum stock and ordering costs not possible in one profile |
| 452 | Fixed lot size and ordering costs not possible in one profile |
| 453 | Use an optimum lot-sizing procedure since ordering costs |
| 454 | Specify the number of forecast values to be calculated |
| 455 | Check the number of periods per season (default is 12) |
| 456 | Specify a tracking limit |
| 457 | Enter a forecast model or model selection |
| 458 | Model selection reset (irrelevant for this model) |
| 459 | Specify a procedure for model selection |
| 460 | Sales org. &, distr. channel & invalid sales area |
| 461 | Specify the degree of parameter optimization |
| 462 | Forecast model requires a weighting group to be entered |
| 463 | Weighting group reset (irrelevant here) |
| 464 | Weighting group & not in table T440G |
| 465 | Specify the relevant unit of measure |
| 466 | Specify a loading equipment quantity |
| 467 | Specify a loading equipment quantity and unit of measure |
| 468 | Unit of measure must be base unit, WM unit, or unit of issue |
| 469 | Alpha factor reset (not needed for this model) |
| 470 | Beta factor reset (not needed for this model) |
| 471 | Gamma factor reset (not needed for this model) |
| 472 | Delta factor reset (not needed for this model) |
| 473 | Material forecast is new; enter the initialization indicator |
| 474 | Basic value reset (not needed for this model) |
| 475 | Trend value reset (not needed for this model) |
| 476 | MAD and forecast error reset (not needed for this model) |
| 477 | Specify a forecast profile |
| 478 | The forecast profile will be reset when you choose Enter |
| 479 | The number of fixed periods is greater or equal to the forecast periods |
| 480 | No. of init. periods may not exceed consumption values |
| 481 | Smoothing values must be between zero and one |
| 482 | No material management record exists for company code & |
| 483 | Sales activity not allowed (material assigned to division &) |
| 484 | Minimum delivery quantity greater than minimum order quantity |
| 485 | Material not yet created in supplying plant |
| 486 | No supplier consignment can be created for this material |
| 487 | Division & not possible (otherwise invalid sales areas) |
| 488 | Enter loading equipment quantities in descending order |
| 489 | The specified year & is not the current calendar year |
| 490 | Unit of measure & is not defined; check your entry |
| 491 | Unit of measure & is not defined as a commercial unit |
| 492 | Conversion factors for unit on main screen changeable only with BMMH6 |
| 493 | & is not a configurable material |
| 494 | Configure the material |
| 495 | You have not yet assigned a configurable material to the material |
| 496 | Specify a valid MRP procedure |
| 497 | Enter a valid lot size (materials planning) |
| 498 | & & is smaller than & &; check your entries |
| 499 | & is not a time unit |
| 500 | Internal number assignment not yet supported |
| 501 | Text for language & does not exist |
| 502 | No text exists |
| 503 | The last blank line cannot be deleted |
| 504 | Error in renaming long texts |
| 505 | Text must be selected for batch input |
| 506 | Enter a language for the text |
| 507 | No text created |
| 508 | Use the "Create" function |
| 509 | Text for language & already exists |
| 510 | Configurable material specified does not exist in plant & |
| 511 | Select one or more texts |
| 512 | All selected items have been processed |
| 513 | Cursor not positioned on a selectable line |
| 514 | System error: incorrect index structure for table & |
| 515 | System error: index not found when reading (&) |
| 516 | Profile changed, but batch job could not be scheduled |
| 517 | Profile deleted, but background job could not be scheduled |
| 518 | Use the "Delete" function |
| 519 | More texts exist; scroll up or down |
| 520 | Long text object & does not exist |
| 521 | ID & for long text object & does not exist |
| 522 | Language & does not exist |
| 523 | Text name & not allowed |
| 524 | Long text cannot be read |
| 525 | Text for language & does not exist |
| 526 | An empty text cannot be created |
| 527 | Configuration values will be lost |
| 528 | Value will be reset (in-house prod. time dep. on lot size exists already) |
| 529 | Selection ID of bill of material not yet maintained for plant & |
| 530 | Batch management requirement cannot be changed; choose "Display errors" |
| 531 | You are changing material group, but material already used by purchasing |
| 532 | This order unit has been used already |
| 533 | Hazardous material number & is not defined |
| 534 | No additional EANs exist |
| 535 | First specify the main EAN for the unit & |
| 536 | Fiscal year variant & does not exist |
| 537 | Periods for fiscal year variant & are incorrect |
| 538 | Specify only one of the two fields |
| 539 | Goods receipt processing time less than goods receipt insp. duration |
| 540 | No external procurement defined for this material |
| 541 | Configuration values cannot be assigned |
| 542 | The material you want to configure is already being processed |
| 543 | No characteristics requiring values exist |
| 544 | Specify a valid configurable material |
| 545 | Configuration values cannot be assigned |
| 546 | The configurable material assigned has a different base unit of measure |
| 547 | You cannot change the base unit since configurable matl already specified |
| 548 | No serial no. profile possible for material to be handled in batches |
| 549 | Specify a repetitive manufacturing profile |
| 550 | You have not specified a planning time fence |
| 551 | You cannot change the price control indicator |
| 552 | Material & does not need to be handled in batches |
| 553 | Split valuation is not defined for plant & |
| 554 | Batch & does not exist for material & |
| 555 | Material type changed from & to & |
| 556 | Batch & already exists for material & |
| 557 | Batch & is assigned to material & |
| 558 | Batch & does not exist |
| 559 | Batch & already exists |
| 560 | Storage location specified, but not the plant |
| 561 | Specify a material number |
| 562 | The material is presently blocked for one or more plants |
| 563 | Unit of measure & not allowed for the current material |
| 564 | The material number contains special characters that are not allowed |
| 565 | With this material type, ext. material no. must not contain only numbers |
| 566 | Enter a material group |
| 567 | The special character & may not be used for the batch |
| 568 | Not possible to maintain long text (text name contains &) |
| 569 | No admissible units of measure exist |
| 570 | The consumption periods require a consumption mode |
| 571 | Check the consumption periods |
| 572 | You have chosen consumption mode "No consumption" |
| 573 | Rounding value and rounding profile not possible in a single profile |
| 574 | Entry & & & does not exist in table TKKH1 |
| 575 | The data for the reference material for consumption is incomplete |
| 576 | The combination of reference material and plant does not exist |
| 577 | Unit of measure & cannot be converted from another unit |
| 578 | Specify a unit of measure |
| 579 | Commodity code & does not exist in the country/region & |
| 580 | Check the conversion factor for the base unit of the planning material |
| 581 | Combination of planning material and plant does not exist |
| 582 | Enter a planning material or reset the planning plant/conversion factor |
| 583 | Enter a planning plant |
| 584 | Planning material/plant is itself planned via & & |
| 585 | Not possible to plan this material since it is a planning material |
| 586 | System error in blocking the planning material |
| 587 | The planning material & is locked by the user & |
| 588 | Specify the reference data in full |
| 589 | Specify the reference batch |
| 590 | Specify the reference material |
| 591 | The batch already exists and is being extended |
| 592 | For batch & there is no valuation record in plant & |
| 593 | Enter either a rounding value or rounding profile |
| 594 | With time-phased materials planning, MRP lot size & is not allowed |
| 595 | With time-phased materials planning, enter a planning cycle |
| 596 | Plannning cycle & is not allowed for plant & |
| 597 | The reference material has the period indicator & |
| 598 | The reference material has the fiscal year variant & |
| 599 | Reference material has base unit of measure & |
| 600 | Batch created |
| 601 | Batch changed |
| 602 | Planning calendar & is not allowed for plant & |
| 603 | Rounding profile & is not allowed for plant & |
| 604 | Range of coverage profile & is not allowed for plant & |
| 605 | The effective-out date is in the past |
| 606 | Enter a follow-up material |
| 607 | The follow-up material may not be identical to the discontinued material |
| 608 | The follow-up material has base unit of measure & |
| 609 | The specified follow-up material results in recursiveness |
| 610 | Coding generated |
| 611 | Forecast only possible if you enter a period indicator |
| 612 | Check the general plant data |
| 613 | The chain of follow-up materials is recursive |
| 614 | MRP group & is not defined in plant & |
| 615 | Sales price maintenance blocked by another user |
| 616 | Sales price maintenance is not defined in your system |
| 617 | You are not authorized to maintain the sales price |
| 618 | Sales price not yet maintained |
| 619 | Material does not exist in delivering or production plant & |
| 620 | Program terminated when material created (mat. no. already exists) |
| 621 | Selection terminated after 999 pages |
| 622 | Position the cursor in the header |
| 623 | Material & does not exist |
| 624 | The unit of measure specified does not exist for the language & |
| 625 | The unit of measure specified is not allowed for this material |
| 626 | The data will be displayed in the base unit of measure |
| 627 | Position the cursor on a unit of measure |
| 628 | & open statuses have been deleted |
| 629 | No outstanding maintenance statuses have been deleted |
| 630 | You can now enter further production versions |
| 631 | Choose a production version |
| 632 | Version ID already used |
| 633 | Last production version has already been reached |
| 634 | First production version has already been reached |
| 635 | "To" date is in the past |
| 636 | Production versions exist for which repetitive manufacturing is allowed |
| 637 | Production versions are not required with external procurement |
| 638 | Planning cycle & does not exist |
| 639 | Define repetitive manufacturing for this material |
| 640 | Program terminated while deleting old production versions (update) |
| 641 | Program terminated while creating new production versions (update) |
| 642 | "From" lot size may not be greater than "to" lot size |
| 643 | No bill of material exists |
| 644 | No matching alternative BOM exists |
| 645 | No task list exists |
| 646 | No matching task list & / & / & exists |
| 647 | Maintain the conversion factor for the alternative unit & |
| 648 | Selection of routing & / & / & not successful |
| 649 | Check the combination of task list group, group counter, + task list type |
| 650 | Costing data is only useful if valuation takes place at plant level |
| 651 | No matching alternative BOM exists |
| 652 | Lot size of production version does not match alternative BOM |
| 653 | Check the default alternative BOM |
| 654 | Date of production version does not match alternative BOM |
| 655 | Maintain a special characteristic code |
| 656 | You cannot activate deletion flags in the test |
| 657 | Quota arrangements already exist for the production version |
| 658 | Enter a description |
| 659 | The global settings for repetitive manufacturing have not been made |
| 660 | Enter the basic value for the tolerance value |
| 661 | Only individual planning possible (no quantity-based inventory mngt.) |
| 662 | Production line & does not exist |
| 663 | Check the proposed task list alternative & & & |
| 664 | Special procurement type is reset |
| 665 | Special procurement for costing is reset |
| 666 | Not possible to change or display export licenses here |
| 667 | Default group & determined |
| 668 | Program terminated while deleting old export control data (update) |
| 669 | Program terminated while adding new export control data (update) |
| 670 | Lot sizing procedure requires a rounding value |
| 671 | Fixed lot size must be a multiple of the rounding value |
| 672 | MRP group & not defined in any plant |
| 673 | PP planning calendar & not defined in any plant |
| 674 | Range of coverage profile & not defined in any plant |
| 675 | The procurement type of the special procurement type is & |
| 676 | The procurement type of the special procurement type is & |
| 677 | Follow-up material is already a discontinued material |
| 678 | Error in changing the batch status. SY-SUBRC = & |
| 679 | Special procurement type & does not exist |
| 680 | Costing lot size adapted |
| 681 | Overhead group & is not defined |
| 682 | Batch & of material & is already locked by & |
| 683 | No authorization for displaying batch & |
| 684 | No authorization for maintaining batch & |
| 685 | No authorization for maintaining export control data |
| 686 | No authorization for displaying export control data |
| 687 | Rounding profile & does not exist |
| 688 | Supplier can no longer be changed |
| 689 | Supplier batch can no longer be changed |
| 690 | Document & will be posted for the change in batch status |
| 691 | Reference material classification copied |
| 692 | No update of simulative opening stocks for planning versions |
| 693 | Error deleting from table & |
| 694 | Error in updating to table & |
| 695 | Error inserting in table & |
| 696 | Generation carried out |
| 697 | You have entered an invalid function group |
| 698 | Error in & - SY-SUBRC: & |
| 699 | NO TVGVI entries exist for function group & |
| 700 | Screen sequence number could not be determined |
| 701 | Different GUI statuses exist for the initial screen |
| 702 | The view selection is empty |
| 703 | Prod. versions for material & in plant & locked by & |
| 704 | Select either pipeline mandatory or pipeline allowed |
| 705 | Period closing terminated |
| 706 | The deletion flag has been scheduled for & |
| 707 | You have defined a "Goto" function with a value > & |
| 708 | You have defined an "Extras" function with a value > 15 |
| 709 | The scheduled date & is not in the future |
| 710 | Valid-from date & is in the future |
| 711 | Different base units of measure have been specified |
| 712 | Date & for the planned change is not in the future |
| 713 | Valid-from date & / change planned for & |
| 714 | The main EAN for the unit of measure & is not unique |
| 715 | Date for selection is in the past |
| 716 | Error in reading change documentation (&) |
| 717 | Field overflow when converting alternative unit of measure & |
| 718 | A serial number profile has already been maintained for the material |
| 719 | Effective-out date and follow-up material will be reset |
| 720 | Batch status cannot be changed since the material is blocked |
| 721 | Enter a plant |
| 722 | Enter a valuation area |
| 723 | Enter a company code |
| 724 | Enter an alternative unit of measure |
| 725 | Conversion factors may not have the value zero |
| 726 | The follow-up material does not exist in plant & |
| 727 | The apportionment structure does not exist for material & in plant & |
| 728 | Enter a base unit of measure |
| 729 | No serial number profile possible if split valuation defined for material |
| 730 | Error in extending forecast values for period & |
| 731 | No forecast values possible for period & |
| 732 | Change number does not exist |
| 733 | Object type does not allow the change |
| 734 | Object type does not allow the change |
| 735 | Object management record not generated |
| 736 | No change to object for change number |
| 737 | Interface is inadequately supplied |
| 738 | Object blocked for change |
| 739 | Error in system table TCC01 |
| 740 | Data will be scheduled for & |
| 741 | The material does not exist for the key date & |
| 742 | Error: planned change |
| 743 | MRP area & does not exist |
| 744 | The control key for QM does not require a certificate type |
| 745 | Error: planned change |
| 746 | Error: planned change |
| 747 | Error: planned change |
| 748 | Record & & & does not exist in table & |
| 749 | Required parameters missing when calling up module & |
| 750 | Key for required table & was not transferred |
| 751 | No view identifier transferred |
| 752 | No material number transferred |
| 753 | Table 130V not maintained |
| 754 | The type of block must be the same for all buffered records |
| 755 | Material does not exist |
| 756 | Plant & for material does not exist |
| 757 | Material for plant & storage location & does not exist |
| 758 | Unit of measure & for material not maintained |
| 759 | Mat. for valuation area & and valuation type & does not exist |
| 760 | Material for warehouse no. & does not exist |
| 761 | Mat. for warehouse no. & and storage type & does not exist |
| 762 | Material for sales org. & and distr. channel & does not exist |
| 763 | Description for material & and for language & does not exist |
| 764 | Minimum remaining shelf life exceeds total shelf life |
| 765 | Enter a minimum remaining shelf life |
| 766 | Enter a valid percentage rate |
| 767 | Important: the date of production must be entered in the goods receipt |
| 768 | Special procurement type for costing will be reset |
| 769 | Roll forward period for planning will be reset |
| 770 | Stocks at higher levels will also be displayed |
| 771 | Position the cursor on a stock line |
| 772 | Check the multiplier for the reference material for consumption |
| 773 | Batch & is already assigned to another material |
| 774 | No selection ID for routings can be determined |
| 775 | Error in recursiveness check for special procurement type |
| 776 | BOM details and task list details are ignored w. special procurement & |
| 777 | You have not specified a reorder point |
| 778 | The classification of the reference batch has been copied |
| 779 | No company code is assigned to plant & |
| 780 | No materials can be displayed |
| 781 | List incomplete due to missing authorization |
| 782 | EAN & created for article & and unit of measure & |
| 783 | Base unit of measure cannot be changed since EAN already assigned |
| 784 | No more columns exist |
| 785 | Caution: 60 time buckets max. can be taken into account |
| 786 | Inventory management is not defined for the follow-up material |
| 787 | You cannot execute another function after deleting a long text |
| 788 | Configurable material and current material have different strategy groups |
| 789 | Enter a valuation area |
| 790 | You have not yet maintained valuation-type-independent data |
| 791 | Application: Material master maintenance: Client & |
| 792 | No entries in table T130F (attributes of material master fields) |
| 793 | The maintenance statuses will not be changed in client & |
| 794 | Maintenance status overflow for field & in client & |
| 795 | Lot size independent costs copied although the currency differs |
| 796 | The reorder point exceeds the maximum stock level |
| 797 | The valuation area could not be determined; check your entries |
| 798 | EAN changed; new EAN will be created for material & and unit & |
| 799 | EAN to be updated will be deleted |
| 800 | Material & created |
| 801 | Material & changed |
| 802 | Counter overflow in table MSTA |
| 803 | Data cannot be changed here |
| 804 | Sales price for material & changed |
| 805 | The material does not exist in production storage location & |
| 806 | New screen sequence has different initial screen |
| 807 | Function carried out |
| 808 | Material & already exists; you can process it only in "Change" mode |
| 809 | No application for the BOM selection can be determined |
| 810 | No changes made |
| 811 | Change to material & is scheduled for & |
| 812 | Change in sales price for material & is scheduled for & |
| 813 | Caution: The current date will be set |
| 814 | The date is not in the future |
| 815 | You cannot set the "Configurable material" indicator for this material |
| 816 | You must enter the current material as the configurable material |
| 817 | You have not yet assigned configuration values |
| 818 | You have not yet entered an EAN for the material & |
| 819 | The reference material's inspection setup has not been copied |
| 820 | Tables TCURM and T001W inconsistent; notify your systems administrator |
| 821 | Tables TCURM and T001K inconsistent; notify your systems administrator |
| 822 | Valuation level is not set in Customizing |
| 823 | Plant & not in T001K; notify your systems administrator |
| 824 | The company code for & cannot be determined |
| 825 | The company code does not exist for sales organization & |
| 826 | Maintenance status of field & does not correspond to status of screen & |
| 827 | Only external procurement is defined for the material |
| 828 | You do not have the authorization to create a material |
| 829 | This combination of entries does not make sense |
| 830 | General configurable material with configuration value assignment copied |
| 831 | Plants exist in which you have not specified a control key |
| 832 | Valuation category & not allowed if material ledger active |
| 833 | Transfer of valuation data to & & incorrect in plants |
| 834 | Specify a price control |
| 835 | Specify an order unit |
| 836 | No cost estimate number could be assigned |
| 837 | The base unit of measure of the material & cannot be deleted |
| 838 | You have specified different delivery units |
| 839 | You have specified different sales units |
| 840 | No materials selected in the range specified |
| 841 | & materials to be processed; program will run in the background |
| 842 | Enter a positive number |
| 843 | & material(s) transferred, & processed successfully |
| 844 | MARA locked by another user |
| 845 | Job scheduling has failed (&) |
| 846 | Material(s) will be processed in the background |
| 847 | You cannot choose joint production here |
| 848 | No authorization to display data for plants & & & & |
| 849 | No authorization for material & |
| 850 | Error while creating change document & |
| 851 | No authorization for material type & |
| 852 | No authorization for material group & |
| 853 | No authorization for this transaction |
| 854 | No authorization to display data for plant & |
| 855 | No authorization to process data for plant & |
| 856 | No authorization to display valuation area & |
| 857 | No authorization to process data for valuation area & |
| 858 | No auth. to display data for sales org. & distrib. channel & |
| 859 | No auth. to process data for sales org. & distribution channel & |
| 860 | No authorization to display data for warehouse number & |
| 861 | No authorization to process data for warehouse number & |
| 862 | No authorization to display data for company code & |
| 863 | No authorization to process data for company code & |
| 864 | No authorization to carry out period closing |
| 865 | No authorization to carry out initialization |
| 866 | No authorization to change back-posting in this company code |
| 867 | Enter the control key for QM in procurement |
| 868 | The control key you have entered does not exist |
| 869 | Enter a certificate type |
| 870 | Plants exist in which QM procurement data is maintained |
| 871 | QM procurement is not active, but QM procurement data has been maintained |
| 872 | You have not entered a control key for QM procurement |
| 873 | Enter document assignments for technical delivery terms |
| 874 | Choose selected fields only |
| 875 | Specify either lot size dependent or independent in-house production time |
| 876 | Specify the base quantity |
| 877 | Specify a label type |
| 878 | Specify a label form |
| 879 | Select & |
| 880 | Specify all required fields |
| 881 | An error has occurred in the foreign key check or special check |
| 882 | The conversion factors of the base unit of measure will be set to 1 |
| 883 | You have not specified a unit of measure; data will be reset |
| 884 | Not all of the valuation segments necessary can be locked |
| 885 | You do not have the authorization to change the status |
| 886 | Reference material's classification data has not been copied |
| 887 | Specify a safety time |
| 888 | You have specified different order units |
| 889 | The batch has not been classified |
| 890 | Error in accessing table & |
| 891 | Error in creating function module & |
| 892 | Function module & successfully generated |
| 893 | Sales organization missing; sales text not created |
| 894 | Distribution channel missing: sales text not created |
| 895 | The batch will be classified automatically |
| 896 | Serial number management is not possible with backflushing |
| 897 | The plant data of the material & is locked by the user & |
| 898 | The main EAN for the supplier & and unit of measure & is not unique |
| 899 | & & & & |