MD - Material Requirements Planning (MRP)
The following messages are stored in message class MD: Material Requirements Planning (MRP).
It is part of development package MD in software component PP-MRP-BD. This development package consists of objects that can be grouped under "Application Development R/3 Material Requirements Planning".
It is part of development package MD in software component PP-MRP-BD. This development package consists of objects that can be grouped under "Application Development R/3 Material Requirements Planning".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ****COMMENT: Messages used generally |
| 001 | Function & is not supported |
| 002 | System locking error |
| 003 | Choose a line |
| 004 | You do not have the necessary authorization for this function |
| 005 | Consistency check error in program &1 routine &2 |
| 006 | Background job & was scheduled |
| 007 | Plant ID is invalid |
| 008 | MRP controller not found |
| 011 | Individual project planning for &1 &2 locked |
| 050 | Selection rule & does not exist |
| 051 | Display filter & does not exist |
| 052 | MRP list for material & & & has been created |
| 053 | Requirements/stock list for material & & & has been created |
| 054 | Stock/requirements list for material & & & could not be compiled |
| 055 | MRP list for material & & & could not be compiled |
| 091 | Only one setting is possible for this option |
| 095 | Discontinued parts not possible. Discontinuation is controlled by SAP APO |
| 100 | *****COMMENT: Messages for long-term planning |
| 101 | No data changed |
| 102 | Error saving planning scenario & |
| 103 | Error saving the independent requirements versions for the scenario |
| 104 | Planning scenario & was saved |
| 105 | Planning scenario & exists already |
| 106 | Planned ind. reqmts version & has already been assigned |
| 107 | Simulation version is same as the version to be replaced |
| 108 | Finish date lies before the start date |
| 109 | Planning scenario & does not exist |
| 110 | Planning scenario & was deleted |
| 111 | Error deleting planning scenario & |
| 112 | Version & must be allocated to the scenario first |
| 113 | Error reading planning scenario & |
| 114 | Planning scenario & has not been released |
| 115 | Planning scenario & is blocked by another user |
| 116 | Scenario & is not available for plant & |
| 117 | Error saving the plants for the scenario |
| 118 | Date & lies outside the planning period |
| 119 | Please adjust dates for the independent requirements versions |
| 120 | Plant & has already been allocated |
| 121 | You have not yet allocated any planned indep.reqmts versions |
| 122 | You have not yet allocated any plants |
| 123 | Planning scenario & was released and saved |
| 124 | Version & of the purchasing info system is already being used |
| 125 | Planning version & has already been allocated to the scenario |
| 126 | The planned indep.reqmts versions were activated |
| 127 | No appropriate planned indep.reqmts were found for the version |
| 128 | Start date not valid for fixed receipts |
| 129 | Background job could not be created |
| 130 | You do not have the necess.authorization for this function (see long txt) |
| 131 | Simulation planned orders cannot be changed manually |
| 132 | Simulation planned orders cannot be converted |
| 133 | Simulation planned orders cannot be firmed |
| 134 | Multi-level replacements are not possible |
| 135 | Replacements in overlapping periods is not possible |
| 136 | Please enter a target version |
| 137 | Simulation version &1 cannot be copied to the same version number |
| 138 | Planning period in the past |
| 139 | Version & of stock controlling is used already |
| 140 | No data saved. Please evaluate scenario first |
| 141 | Please enter a scenario number not equal to '000' |
| 142 | Firmed recpts not taken into consideration in planning scenario & |
| 143 | Planned order &1 does not belong to planning scenario &2 |
| 144 | No single-item planning exists in planning scenario &. |
| 145 | Simulative orders should not be displayed or changed using & |
| 146 | Scenario &1 is not assigned to sales order plant &2 |
| 147 | Scenario &1 is not set for single-item planning. |
| 148 | 'Use firm puchase requisitions' without including fixed receipts |
| 149 | 'Use firm planned orders' without including fixed receipts |
| 150 | *****COMMENT Messages for : long-term planning / PURCHIS |
| 151 | No data saved. Please evauluate the scenario for the PURCHI first |
| 152 | Please specify which planned price (1-3) is to be used |
| 153 | A new version &1 for info structure S012 will be created |
| 154 | Version &1 '&2' will be evaluated |
| 155 | No data for scenario &1 exists in PURCHIS |
| 156 | Material &1 is a direct production material - function not permitted |
| 157 | Do not enter planning scenario for copying - function not possible |
| 158 | Please enter start date |
| 159 | No data for scenario &1 exist in Inventory Controlling |
| 160 | *** COMMENT: Calculation of simulative initial stock |
| 161 | Simulative initial stocks for scenario & were saved |
| 162 | Error at date entry |
| 163 | No authorization for plant & |
| 164 | Planning scenario & has not been assigned any plants |
| 165 | Simulative opening balance (stock) not allowed with MRP areas |
| 170 | *** COMMENT: Delete planning scenario |
| 171 | Firstly delete dependent data for scenario &1 |
| 172 | No dependent data for scenario &1 has been found |
| 173 | No dependent data has been selected for deletion |
| 174 | Check dependent data: &1 |
| 180 | *** COMMENT: Gross lot sizes |
| 181 | Enter a gross lot size for the scenario |
| 182 | Lot size procedure &1 being used is not gross lot size procedure |
| 183 | Lot size procedure &1 is not defined |
| 190 | Different periods not possible during activation |
| 200 | *****COMMENT: Messages for CO integration (Maintain T442C) |
| 201 | Version &1 is not a planned version |
| 202 | No planned integration for version &1 in fiscal year &2 |
| 203 | No change possible as data already transferred |
| 210 | Error reading version &1 in controlling area &2 |
| 211 | Version &2 is not maintained for fiscal year &1 |
| 212 | Please enter a planning scenario |
| 250 | *****COMMENT: Messages for parallel MRP |
| 251 | Please check the destinations for parallel MRP |
| 252 | Total planning run stopped due to &1 terminations (dumps) of &2 materials |
| 253 | No instance exists for planned order &1 (Please see long text!) |
| 260 | Error in server group. The system will switch to sequential reading |
| 261 | Error with RFCs. The system will switch to sequential reading |
| 300 | *****COMMENT: Capacity planning messages (SAPLM61D) |
| 301 | Choose a valid field |
| 302 | Please select a valid field for the display of the pegged capacity |
| 303 | Please place the cursor on a planned order number |
| 304 | No capacity load exists for the specified work center |
| 305 | No work centers with capacity requirements were found |
| 306 | Processing terminated by the user |
| 307 | No scheduling log exists |
| 309 | Program error: internal table & is inconsistent |
| 310 | No planning calendar exists for the material |
| 311 | Period & was not found |
| 312 | No periods exist with overload |
| 313 | Capacity for planned order has been scheduled |
| 314 | The scrap quantity was adjusted proportionally |
| 315 | Please enter start and finish date |
| 316 | Planned order belongs to another material |
| 317 | MRP area &1 is not defined in plant &2 |
| 318 | MRP area &1 has not been defined |
| 319 | Material &1 is not defined for MRP area &2 |
| 320 | Enter plant or MRP area |
| 321 | Plant MRP area and plant must have the same name |
| 322 | Only plant MRP areas are allowed to have 1 to 4 digits |
| 323 | MRP area &1 has been marked to be deleted for material &2 |
| 324 | Material &1 is not defined in plant &2 |
| 325 | Storage loc. &3 does not belong to the same MRP area as storage loc. &3 |
| 326 | Storage location &1 does not belong to MRP area &2 |
| 327 | Enter plant |
| 328 | The storage location type of MRP area must be allocated a recvg stor. loc |
| 329 | Capacity overload for capacity &1 and capacity category &2 in period &3 |
| 335 | When planning with MRP areas, you should use scope of planning |
| 350 | *****COMMENT: Customizing MRP area |
| 351 | View &1 is not possible for MRP type &2 |
| 352 | With MRP area type &1, you are not intended to enter a recvg stor. loc. |
| 353 | Subcontractor MRP area &1 in plant &2 maintained incorrectly |
| 354 | With MRP area type 02, you have to enter a receiving storage location |
| 356 | This function is obsolete - all plants MRP-relevant. |
| 357 | Plant &1 has already been assigned a different MRP area |
| 358 | The creation of subcontracting MRP areas is not supported |
| 363 | Subcontractor &1 has already been allocated to MRP area &2 |
| 365 | Deletion of MRP area &1 is not possible |
| 366 | Not possible to delete storage location &3. Used by material &2 |
| 367 | Not possible to delete MRP area &1, as it is assigned to material &2 |
| 368 | Storage location &2 is receiving storage location of MRP area &1 |
| 369 | Only plant MRP area is possible for this element |
| 370 | Vendor &1 is being used by material &2, therefore cannot be changed |
| 371 | Function cannot be executed - MRP areas are not activated |
| 374 | Deletion of MRP Area &1 is not possible |
| 375 | Deletion of storage location &2 in MRP area &1 is not possible |
| 376 | Deletion of supplier &2 in MRP area &1 is not possible |
| 377 | Deletion is not possible because the production system is not available |
| 380 | Please enter an MRP area profile |
| 381 | Please enter an MRP area field |
| 382 | Field &1 not supported in MRP area profile |
| 383 | Value &1 not allowed for field &2. |
| 384 | Please enter a numerical value for field &1. |
| 385 | Negative values not allowed for field &1. |
| 386 | Entry too long (enter in the format &1) |
| 387 | Field overflow for field &1: value &2 |
| 388 | Input must be in the format &1 |
| 389 | Check Table &1 not allowed |
| 400 | ***** COMMENT: Exception messages in MRP |
| 401 | &1: &2 (A1) |
| 402 | &1: &2 (A9) |
| 403 | &1: &2 (N1) |
| 404 | &1: &2 (N2) |
| 405 | &1: &2 (N3) |
| 406 | &1: &2 (N4) |
| 407 | &1: &2 (S1) |
| 408 | &1: &2 (S2) |
| 409 | &1: &2 (S3) |
| 410 | &1: &2 (S6) |
| 411 | &1: &2 (S7) |
| 412 | &1: &2 (S8) |
| 413 | &1: &2 (T2) |
| 414 | &1: &2 (T3) |
| 415 | &1: &2 (T4) |
| 416 | &1: &2 (V1) |
| 417 | &1: &2 (V2) |
| 418 | &1: &2 &3 (V3) |
| 419 | &1: &2 &3 (U1) |
| 420 | &1: &2 &3 (U2) |
| 421 | &1: &2 &3 (U3) |
| 422 | &1: &2 &3 (U4) |
| 423 | &1: &2 (U5) |
| 424 | &1: &2 (P1) |
| 425 | &1: &2 (P2) |
| 426 | &1: &2 (P3) |
| 427 | &1: &2 (P4) |
| 428 | &1: &2 (S9) |
| 429 | &1: &2 (U6) |
| 430 | &1: &2 (C1) |
| 431 | &1: &2 (S4) |
| 432 | &1: &2 (U9) |
| 433 | &1: &2 (U8) |
| 434 | &1: &2 (S5) |
| 435 | &1: &2 (W1) |
| 436 | &1: &2 (W2) |
| 448 | Stock assigned to the follow-up material is too high |
| 449 | Part to be discontinued; receipt transferred to follow-up material |
| 450 | ***** COMMENT: New exception message for MD04/MD05 |
| 451 | The list was created at &1 hours |
| 452 | The start date of the interval must be before the end date |
| 453 | Define traffic light for range of coverage: Press F1 for more information |
| 454 | Define traffic light for exception groups. Press F1 for more information |
| 455 | The user settings for traffic lights have been saved |
| 456 | The user settings for traffic lights have been deleted |
| 457 | Specify a start or finish date, or delete the time interval |
| 458 | Split reset to days due to error setting up period totals |
| 459 | The previous material is displayed again. Press ENTER. |
| 460 | MRP views for &1 not maintained |
| 461 | Start Date Set to Current Date |
| 480 | Scheduling carried out successfully |
| 481 | Scheduling parameters are not maintained in Customizing |
| 482 | No capacity requirements determined, see customizing |
| 483 | Routing does not exist |
| 484 | No valid routing can be selected |
| 485 | Scheduling terminated, see log |
| 486 | Scheduling carried out, see log for error messages |
| 487 | Scheduling executed, see log for information messages |
| 488 | Exception group 8 is predefined for terminations |
| 489 | Range of coverage (yellow) may not be less than range of coverage (red) |
| 490 | &1: Ranges of coverage and exception groups within range of &2 |
| 491 | &1 for material &2: &3 days' supply is less than limiting value of &4 |
| 492 | &1 for material &2: Rcpt days' supply 1 &3 is less than limiting value &4 |
| 493 | &1 for material &2: Rcpt day's supply 2 &3 is less than limiting value &4 |
| 494 | &1 for material &2: There are exceptions to exception group &3 |
| 495 | You can display a maximum of &1 curves at the same time |
| 496 | The display period must be a minimum of 1 day |
| 497 | The minimum Y value must be less than the maximum Y value |
| 498 | Range of coverage (green) must not be lower than range of cov. (yellow) |
| 500 | ***** COMMENT: new exception messages in MRP for components |
| 501 | &1: Not covered by master production schedule at component level (S8) |
| 502 | &1: Start date of components in past (T3) |
| 503 | &1: Finish date of components in past (T4) |
| 504 | &1: Preference for operation at component level (U1) |
| 505 | &1: Move operation to component level (U2) |
| 510 | Overflow: More than 9999 items in BOM recursive for BOM &? |
| 511 | Could not explode phantom assembly &1 |
| 512 | Overflow: More than 99 phantom assemblies on level &1 of MatBOM for &2 |
| 513 | Overflow: more than &1 phantom assemblies for MatBOM &2 &3 &4 |
| 550 | ***** COMMENT: Messages for grouping |
| 551 | WBS element has not been defined as a grouping WBS element |
| 575 | ******Remarks ****Messages for SOA |
| 576 | Value PeriodTotalTimeMeasure is mandatory for value 2 of agg. code |
| 577 | Enter the MaterialSupplyAndDemandViewAggregationLevelCode |
| 578 | Enter the SupplyPlanningAreaID |
| 579 | Enter the MaterialInternalID |
| 580 | Enter the SupplyPlanningAreaTypeCode |
| 581 | MaterialSupplyAndDemandViewAggregationLevelCode &1 does not exist |
| 582 | Enter the MaterialSupplyAndDemandViewCategoryCode |
| 583 | MaterialSupplyAndDemandViewCategoryCode &1 does not exist |
| 584 | Enter a value in the period_totals_time_measure-unit_code field |
| 585 | SupplyPlanningAreaTypeCode &1 does not exist |
| 601 | Only total requirements with manual cost collectors are permitted |
| 650 | ***** COMMENT: messages for BAPIs |
| 651 | No imported data has been set with the flag for "change" |
| 652 | Planned order number has not been entered |
| 653 | Not possible to change component firming indicator with reqmts totaling |
| 654 | Planned order & cannot be changed manually |
| 655 | & planned orders have been selected |
| 656 | Planning scenario & does not exist |
| 657 | Planned order & exists |
| 658 | Enter order type |
| 659 | Enter a planning plant |
| 660 | There is a conflict in the import parameters. |
| 661 | No material components in original planned order & |
| 662 | Imported component data is identical to available data |
| 666 | No filter for the external view has been created |
| 667 | Vendor & has been entered in the system. Correct |
| 668 | Enter vendor |
| 669 | This is a SAP standard variant. See long text! |
| 675 | Implementation of the BAdI delivered inconsistent values |
| 676 | BAdI & implemented multiple times |
| 677 | BAdI & for the extraction has no active implementation |
| 700 | *****COMMENT: Messages for missing table entries |
| 701 | No entry exists with key '&1' '&2' '&3' in Table T460P |
| 702 | Unit of measure & does not exist |
| 703 | Special procurement & has not been maintained for plant & |
| 704 | Lot size & not maintained |
| 705 | Warehouse cost record & not maintained for plant & |
| 706 | Release period key & has not been maintained for plant & |
| 720 | *****COMMENT: Message for maintenance of flexible transaction calls |
| 721 | Please choose 'New entries' to maintain navigations of your choice |
| 722 | The display of examples is only possible after choosing 'New entries' |
| 723 | Enter a sequential number for this navigation |
| 724 | Enter a transaction code |
| 725 | Enter a text |
| 726 | There are no examples for the MRP element &1 |
| 727 | Please specify either a text or an icon with text |
| 728 | A pushbutton has been added for the chosen example |
| 729 | Invalid transaction code or indicator for external system not set |
| 730 | Material &1 in plant &2 is not APO-relevant |
| 731 | No APO system connected |
| 732 | No active APO integration model for material &1 in plant &2 |
| 733 | No RFC destination for APO system &1 and CIF application case MD |
| 734 | Not possible to access the transactions in logical system &1 |
| 735 | Only materials with unit of measure convertible to &1 are displayed |
| 736 | Not possible to call up in external system without material context |
| 750 | *****COMMENT: Messages for production lot master data |
| 751 | &1 for the production lot &2 is already being processed by &3 |
| 752 | Enter a production lot number |
| 753 | Project & for production lot already exists |
| 754 | WBS element & for production lot already exists |
| 755 | Enter profile or production lot as reference |
| 756 | Project &1 for &2 does not exist |
| 757 | WBS element &1 for &2 does not exist |
| 758 | No data was changed |
| 759 | Production lot & created |
| 760 | Production lot & was changed |
| 761 | Enter production lot or indicator for reference |
| 762 | Production lot and reference production lot must be different |
| 763 | Profile &1 of reference production lot &2 is used instead of profile &3 |
| 764 | Production lot and reference production lot must have the same material |
| 765 | WBS BOM for production lot & already exists |
| 766 | WBS BOM for reference production lot & already exists |
| 767 | Profile & is for non-valuated project stock |
| 800 | *** Comment **** Check Material Master for APO |
| 801 | Check MRP type |
| 802 | Use a suitable lot-sizing procedure |
| 803 | Location type not found |
| 850 | *****COMMENT: messages for XPRA's |
| 851 | & entries were adjested in the planned order |
| 852 | KBKO records were set up for & planned order records |
| 853 | Run-time: & ms |
| 854 | &1 &2 &3 &4 |
| 855 | Error determining duration of working time |
| 856 | No available capacities maintained at &1 |
| 900 | ******Remarks ****Messages for SOA |
| 901 | AggregationLevelCode &1 does not exist |
| 902 | Enter the MaterialSupplyAndDemandViewAggregationLevelCode |
| 903 | Enter the SupplyPlanningAreaID |
| 904 | Enter the MaterialInternalID |
| 905 | Enter the SupplyPlanningAreaTypeCode |
| 906 | SupplyPlanningAreaTypeCode &1 does not exist |
| 907 | Enter the MaterialSupplyAndDemandViewCategoryCode |
| 908 | MaterialSupplyAndDemandViewCategoryCode &1 does not exist |
| 909 | Enter value in period total time measure - Unit Code field |