MMRP01 - Rapid Planning Matrix
The following messages are stored in message class MMRP01: Rapid Planning Matrix.
It is part of development package ISAUTO_MMP in software component SCM-APO-PPS-RPM. This development package consists of objects that can be grouped under "Rapid Planning Matrix".
It is part of development package ISAUTO_MMP in software component SCM-APO-PPS-RPM. This development package consists of objects that can be grouped under "Rapid Planning Matrix".
Message Nr ▲ | Message Text |
|---|---|
| 000 | & & & & |
| 001 | Connection to &1 has failed |
| 002 | Nodes &1 &2 &3 could not be found |
| 003 | Unknown error has occurred in program & |
| 004 | Too many matrices in liveCache |
| 005 | Matrix is locked by a different process |
| 006 | Column already existed when inserting into the matrix |
| 007 | Row already existed when inserting into the matrix |
| 008 | Matrix handle is unknown |
| 009 | Too many rows |
| 010 | Row not found |
| 011 | Column not found |
| 012 | No bit vector was found |
| 013 | RPM is inactive |
| 014 | Too many columns |
| 015 | Matrix type is unknown (internal error) |
| 016 | Matrix type is incompatible (internal error) |
| 017 | Sequence array could not be found (internal error) |
| 018 | Matrix has wrong state (internal error) |
| 019 | Matrix could not be determined for product &1 and location &2 |
| 020 | Matrix could not be determined. Type & |
| 021 | Row &1 was not found in matrix &2 |
| 022 | Termination during explosion: Inconsistent data - &1 |
| 023 | Assembly view was not found |
| 024 | Characteristic values were not found |
| 025 | Error occurred while reading the configuration |
| 026 | Data error: No suitable row found in the characteristic value matrix |
| 027 | Unknown error has occurred in the liveCache (no. &) |
| 028 | RPM has not been activated for product &1 in location &2 |
| 029 | Lock request in liveCache has timed out |
| 030 | Planning file entries have been generated |
| 031 | Error has occurred while determining the orders |
| 032 | Error determination is not active |
| 033 | No base quantity has been transferred (internal error) |
| 034 | Object in liveCache already has newer status when changing |
| 035 | Report cannot be started in this system |
| 036 | Check whether the correct liveCache connection name is entered |
| 037 | Internal error: error &2 in selection condition at component variant &1 |
| 038 | Simulation mode is not possible for RPM product &1, location &2 |
| 039 | 'Display result' is not possible for RPM product &1 location &2 |
| 040 | There are too many orders in liveCache; &1 possible, &2 exist |
| 041 | Error has occurred while writing the period totals, product &1 |
| 042 | No messages were found |
| 043 | Cannot determine requirements for colored product &1 - no product master |
| 044 | There is backflush data for the RPM product |
| 045 | No iPPE access could be determined for production version &1 |
| 046 | There is no production version for order &1; order is ignored |
| 047 | Production version was not found or does not match the product location |
| 048 | No matrix exists or no production version has been selected |
| 049 | Program error: Missing or incorrect production version(incorrect mat.loc) |
| 050 | Orders cannot be sorted |
| 051 | Too many orders |
| 052 | No array transferred or array is empty |
| 053 | Internal error has occurred; no bit vector exists for color node |
| 054 | No class assignment was found for product &1 |
| 055 | No product master data was found for &1 &2 |
| 056 | Color is inactive in the PVS |
| 057 | Use this report at your own risk; it is not serviced by SAP |
| 058 | Data was saved |
| 059 | Transferred table was empty |
| 060 | Parallel processing; error no. & & |
| 061 | Action canceled by user |
| 062 | RPM run is completed for &1 matrices |
| 063 | Class &1/&2 has no characteristics |
| 064 | RPM is only possible when you access using nodes or alternatives |
| 065 | RPM run started in background |
| 066 | Error &1 has occurred for activity &2 |
| 067 | Fatal error at point &1, procedure &2 |
| 068 | No production version has been transferred (internal error) |
| 069 | Object dependency for component variant &1 is not supported by the RPM |
| 070 | Configuration was not found in the matrix (internal error) |
| 071 | Order was not found in the component variant matrix (internal error) |
| 072 | Order was not found in the status matrix (internal error) |
| 073 | Line segment was not found (internal error) |
| 074 | Order already flagged as deleted in component variant matrix (internal) |
| 075 | Order already exists in component variant matrix (internal error) |
| 076 | There are too many characteristic values in the matrix |
| 077 | There are too many stations in the matrix |
| 078 | Row index is invalid (internal error) |
| 079 | Matrix type cannot be changed (internal error) |
| 080 | No station/line segment transferred to RPM_BF_GOODSMOVEMENT_IN_MATRIX |
| 081 | Invalid parameters transferred to RPM_BF_GOODSMOVEMENT_IN_MATRIX |
| 082 | Matrix explosion exited with fatal error; see log |
| 083 | Invalid S/A/P indicator transferred (internal error) |
| 084 | No bit vector exists (internal error) |
| 085 | Matrix is locked; try again |
| 086 | Matrix was not found (internal error) |
| 087 | There are too many component variants |
| 088 | There are too many color nodes |
| 089 | Incorrect index (internal error) |
| 090 | Color node has no (valid) color variant |
| 091 | No bit vector at color variant (internal error) |
| 092 | Sequence array is incomplete (internal error) |
| 093 | SQL tables do not exist for RPM (liveCache initiated?) |
| 094 | Invalid indicator in the strategy parameters (internal error) |
| 095 | Order bit string has a 1 at an invalid position (internal error) |
| 096 | Global variables in LiveCache not initialized (internal error) |
| 097 | Duplicate key in LiveCache (internal error) |
| 098 | Unknown error with code &1 |
| 099 | Unknown TRPID: &1 |
| 100 | Matrix for product &1, location &2, production version &3 |
| 101 | Color node &1 |
| 102 | Station/Line Segment: &1 |
| 103 | Component variant &1 |
| 104 | Order with GUID &1 |
| 105 | No access object for production version &1, product &2, location &3 |
| 106 | No orders found for product &1 and location &2 |
| 107 | Error determining order data for product &1 and location &2 |
| 108 | Error reading resource &1 |
| 109 | Acct assgmnt (ACCID) not found for order &1 with acct assgmnt &2/&3 |
| 110 | Error assigning characteristic &1 to order &2 |
| 111 | Error assigning resource &1 to order &2 |
| 112 | Cannot find order &1 |
| 113 | Error reading a CUOBJ (number range &1, number range object &2) |
| 114 | Order &1 has no CUOBJ |
| 115 | Error in the characteristic value matrix for order &1, CUOBJ &2 |
| 116 | No peg ID found for order &1/product &2/location &3/acct assgmnt &4 |
| 117 | Error compiling order data for order &1 |
| 118 | Error updating order &1 |
| 119 | Error reading product master data for product &1 |
| 120 | Error setting parameters in LiveCache |
| 121 | Error in time bucket; period profile &1, resource &2, plg version &3 |
| 122 | User &1 already processing period profile &2: Display only |
| 123 | Period profile &1 saved |
| 124 | Period profile &1 deleted |
| 125 | The entry for aggregation unit &1 is incorrect |
| 126 | Period profile &1 does not exist |
| 127 | The entries for the finer breakdown are incorrect |
| 128 | Period profile &1 already exists |
| 129 | Period profile &1 could not be saved |
| 130 | Lock request for period profile &1 failed |
| 131 | Period profile &1 could not be deleted |
| 132 | Period profile &1 still used |
| 133 | Index to be recorded for color item variant (internal error) |
| 134 | Period profile &1 not used |
| 135 | Period profile &1 saved, but error during updating of time bucket |
| 136 | Period profile &1 was saved, table of periods not updated in liveCache |
| 137 | Internal error: planning version blank, access MMRP_03_SET_LC_INSTANCE |
| 138 | Internal error: no KNNUM with priority <> 0 found (KNOBJ &2) |
| 139 | Internal error: error reading compilations for comp. var. &1 (KNOBJ &2) |
| 140 | Internal error: error reading KNNUM and priorities for component var. &1 |
| 141 | Internal error: error when exploding component node &1 |
| 142 | RSP only for characteristic value matrices |
| 143 | Method for planned order &1 is not unique |
| 144 | Error when reading order key for planned order &1 |
| 145 | Method &2 is not allowed for planned order &1 |
| 146 | Planned order &1 not found |
| 147 | Planned order &1 is not a matrix planned order |
| 148 | Component node &2 is assigned to several lines in order &1 |
| 149 | Unfixing of node &2 in order &1: not fixed |
| 150 | You do not have authorization for this activity |
| 151 | Entry in table PARTIAL_FIX_ORDERS is missing for order &1 |
| 152 | Internal error: too many orders for RPM_REQS_FOR_ORDID |
| 153 | No available capacity for resource &1 found in liveCache |
| 154 | Order &1 has been backflushed partially already |
| 155 | Internal error: error when saving the status matrix &1 |
| 156 | Internal error: error when reading the status matrix &1 |
| 157 | Internal error: error when reading the item node of status matrix &1 |
| 158 | Internal error: no KNNUM with priority 0 found (KNOBJ &2) |
| 159 | Internal error: no KNNUM with KNSRT 0 found (KNOBJ &2) |
| 160 | Inconsistency in LiveCache |
| 161 | Error has occurred while processing period profile &1 |
| 162 | Error in table of periods &1/resource &2/planning version &3 |
| 163 | Error determining the table of periods &1 and usage &2 |
| 164 | Error reading resource &1/&2 in planning version &3 |
| 165 | Internal error: error when reading the component variants for matrix &1 |
| 166 | Internal error: error when deleting the time bucket in the liveCache |
| 167 | Internal error: error when reading the matrices for planning version &1 |
| 168 | Period profile &1, resource &2, lead time &3 seconds |
| 169 | Updating of time bucket for planning version &1 |
| 170 | Deletion of time bucket for planning version &1 |
| 171 | &1 time bucket deleted and &2 time bucket updated |
| 172 | Internal error: error when updating time bucket in liveCache |
| 173 | Updating of time bucket for period profile &1 |
| 174 | Updating of time bucket for planning version &1 and resource &2 |
| 175 | No time bucket found for the update |
| 176 | Period profile &1 not found |
| 177 | Fixing of RPM components is deactivated in Customizing |
| 178 | Internal error: invalid pegging ID &1 |
| 179 | Internal error: invalid BOM ID &1 |
| 180 | Material &2 not found in location &3 (planning version &1) |
| 181 | Fixing has been saved |
| 182 | Component variant &1 not found at component node &2 (class &3) |
| 183 | Error in the liveCache |
| 184 | Error during the saving in the liveCache (see application log) |
| 185 | Components belong to order &1 |
| 186 | Internal error occurred: memory error |
| 187 | Internal error occurred: bad bitmap index |
| 188 | Internal error occurred: bad target vecs |
| 189 | Error when accessing RPM COM routines: operation no longer supported |
| 190 | Internal error occurred: too many matrices when transposing |
| 191 | Internal error occurred: component variant not found |
| 192 | Internal error occurred: problems with cross call |
| 193 | Internal error occurred: matrix_not_descr_Trans |
| 194 | Internal error occurred: inconsistent_descr_Trans |
| 195 | Internal error occurred: too few lines |
| 196 | Internal error occurred: too few columns |
| 197 | Internal error occurred: Activities are used up |
| 198 | Internal error has occurred: New row is incorrect |
| 199 | Internal error occurred: subrow without corresponding main row |
| 200 | Could not find unit of measure for product &1 |
| 201 | Error occurred during reading of fixed components for order &1 |
| 202 | Order &1 is currently being backflushed or fixed by another user |
| 203 | Fixing is not possible at component node &1 (class &2, class type &3) |
| 204 | No processing: no components selected or the status is incorrect |
| 205 | The RPM test matrix was not created successfully |
| 206 | &1 not found |
| 207 | An internal error has occurred: Deleting crosses in the planning matrix |
| 208 | An internal error has occurred: unknown matrix |
| 209 | The product master for colored material &1 has not been created |
| 210 | 'Explode Det.Scheduling Matrix Only' is not possible for product &1 in &2 |
| 211 | You have not assigned a production calendar to location &1 |
| 212 | Error scheduling horizon for detailed scheduling using production calend. |
| 213 | Product &1 does not exist in the location |
| 214 | Variant &2 is assigned several times to line segment &1 |
| 215 | Activity &2 is assigned several times to line segment &1 |
| 216 | Negative requirement quantity &1 is not allowed |
| 217 | ATP check is not possible for orders in the matrix |
| 218 | Daily reorganization of RPM, started by user &1 on &2 at &3 |
| 219 | Internal error: Error when recording the production data structure (iPPE) |
| 220 | Internal error: More than one KNNUM with prio 0 found for KNOBJ &2 |
| 221 | Selection with order reference not possible for aggregated requirements |
| 222 | Order BOM is not available as it has not yet been exploded (start RPM) |
| 223 | Fixing/ATP not possible because explosion not yet carried out (start RPM) |
| 224 | Backflush not possible as explosion has not been carried out (start RPM) |
| 225 | Component variant &1 cannot be changed |
| 226 | Job for calculating the &1 terminated. Attempts remaining: &2 |
| 227 | Order BOM is not available as it has not yet been exploded (start RPM) |
| 228 | RPM material variants still exist for the configurable product &1 |
| 229 | Configurable product &1 is not an RPM product |
| 230 | Data is locked by another user, you can only display the data |
| 231 | Class &1 in class type &2 cannot be found |
| 232 | Double line elements in the line network &1 |
| 233 | No suitable production version of KMAT found for &1/&2/&3 |
| 234 | Orders for &1/&2/&3 will be ignored |
| 235 | Internal error reorganizing the RPM table of periods |
| 236 | RPMCALL runs in planning version &1: Reorganization not possible |
| 237 | Phantom assembly without material: Node &2 of order &1 will not be firmed |
| 238 | Component variant of a phantom assembly must be unique |
| 239 | You cannot add components to phantom assemblies |
| 240 | ATP relevant components exist in the phantom assembly without material |
| 241 | RPM Order: Changing components in phantom assemblies not allowed |
| 242 | Components of a phantom assembly: only quantity changes possible |
| 243 | Internal error: Order is inconsistent (parent nodes are missing) |
| 244 | Components cannot be fixed until after the next RPMCALL |
| 245 | Dependencies of component variant &1 locked: Syntax error? |
| 246 | Quantity change without material not possible (node &1) |
| 247 | No master data could be found for &1/&2/&3 |
| 248 | Product &1 is not configurable nor is it a material variant |
| 249 | Internal error: Line &1 contains no line resource |
| 250 | Internal error: Error reading the production data structure for &1 |
| 251 | Error code: &1, matrix number: &2 |
| 252 | The system was unable to determine locks |
| 253 | RPM time series have been generated |
| 254 | RPM time series have not been generated because the RPM is running |
| 255 | RPM time series creation finished |
| 256 | Background job has been scheduled for creation of RPM time series |
| 257 | Background job has not been scheduled for creation of RPM time series |
| 258 | Generation of RPM time series for planning version &1 |
| 260 | Phantom comp. &2 in &1 is in make-to-order segm., phantom assembly is not |
| 270 | Material Master settings for RPM component &1 &2 are unsuitable for ATP. |
| 301 | Planning version &1 not found |
| 302 | Input help only possible for entered planning version |
| 303 | Position cursor correctly |
| 304 | Exception in function module &1 |
| 305 | Characteristic (with characteristic value) not found |
| 306 | Order not found |
| 307 | Component node (with variant) not found |
| 308 | Program error |
| 309 | No more component nodes found |
| 310 | No more characteristics found |
| 311 | Plan vers. &1; No CV matrix found for prod. &2, loc. &3, prod.vers. &4 |
| 312 | Plan vers. &1: No orders found for prod. &2, loc. &3, prod. vers. &4 |
| 313 | Plan vers. &1: No char. values found for prod. &2, loc. &3, prod. vers.&4 |
| 314 | Plan vers.&1: No comp. vars found for prod. &2, loc .&3, prod. vers.&4 |
| 315 | Order with GUID &1 not found |
| 316 | Characteristic &1 not found |
| 317 | Order with number &1 already exists |
| 318 | No order number entered |
| 319 | Production version &1 not found |
| 320 | No explosion errors for product &1 in location &2 |
| 321 | Entry table CUOBJ_M_HANDLE not grouped by TOK_M_HANDLE |
| 322 | CUOBJ &1 not found |
| 323 | No backflush information found |
| 324 | Lock error in matrix for plan vers. &1, prod. &2, loc. &3, prod. vers.&4 |
| 325 | KNOBJ &1 could not be evaluated |
| 326 | Inconsistency in order &1 |
| 327 | No matrix found in planning version &1 for the values specified |
| 328 | Plan.vers. &1: no activities found for prod. &2, loc. &3, prod. vers. &4 |
| 329 | Activity not Found |
| 330 | PPE-GUID for production version &1 not found |
| 331 | Line design for PPE-GUID &1 not found |
| 332 | Inconsistent data at line &1 |
| 333 | Loop at line &1 |
| 334 | Double entries in customizing table &1 |
| 335 | No further activities found |
| 336 | No suitable production version of the KMAT exists for a variant |
| 337 | Order is not contained in any status matrix |
| 338 | Check iPPE Customizing of start-up parameters |
| 339 | Date: &1, time: &2 |
| 340 | New creation of RPM time series |
| 341 | Function is not possible for RPM requirements |
| 342 | Structure node &1: Different reporting points at a line (resource &2) |
| 344 | Order &1 is not in any planning matrix -> start RPM |
| 345 | PDS doesn't exist for product &1 and location &2. Matrix can't be shown. |
| 400 | &1 &2 &3 is not a color node |
| 444 | Order &1 is ignored - it does not contain any production version |
| 445 | RPM time series not created due to a blocking process |
| 446 | Internal error during generation of time series |
| 447 | RPM Customizing could not be stored in liveCache |
| 448 | RPM Customizing was changed in the liveCache |
| 449 | User name: &1, report: &2, client: &3, runtime: &4 |
| 450 | Time series could not be generated. Wait &1 seconds. |
| 451 | Product &2 lies in the individual customer segment (use &1) |
| 452 | RPM time series generated |
| 499 | No matrix could be locked |
| 500 | Product &2, location &3, production version &4 |
| 501 | Matrices are locked by user &1 |
| 502 | Unknown error |
| 503 | Order &1 contained no configuration information |
| 504 | Background: &1, transaction &2, program &3, &4 |
| 505 | Error when exploding the RPM |
| 506 | Unknown matrix number |
| 507 | Too many rows in a matrix |
| 508 | Error generating the component variant matrix |
| 509 | Error generating the status matrix |
| 510 | Error generating the characteristic value matrix |
| 511 | Time bucket &1 replaced by &2 in component variant &3 |
| 512 | Peg area &1 not found |
| 513 | Resource assignment to variant &1 does not exist |
| 514 | Scheduling using resource &1 is not possible |
| 515 | Product &1 does not exist in location &2 |
| 516 | An error has caused the RPM run to be canceled |
| 517 | There was at least one serious error during the planning run |
| 518 | RPM run completed without fatal error at &1 |
| 519 | RPM already running in parallel at &1 (&2 products) |
| 520 | Component variant &1 not assigned to an activity for plan &2 |
| 521 | A line balancing relationship is missing for activity &2 (comp.var. &1) |
| 522 | Mode &1 is not assigned to line &2 |
| 523 | Product master &1 is not created for location &2, use &3 |
| 524 | No valid component variants/activities found: &1/&2/&3/&4 |
| 525 | Cannot find order &1 |
| 526 | No location entered for line segment &1 |
| 527 | Could not determine a supply area for line segment &1 (product &2) |
| 528 | Internal error: different number for comp. var. matrix &1 bits &2 |
| 529 | Internal error: different number for activity matrix &1 bits &2 |
| 530 | Mode &1 is assigned to a component variant with errors |
| 531 | Error when starting the background job: &1 |
| 532 | Too many time intervals. Select longer intervals |
| 533 | RPM run in planning version &2 of &1, user &3: Messsages |
| 534 | Runtimes for &1 &2 |
| 535 | RPM run from &1: serious errors |
| 536 | Start-up parameter &2 in variant &1 is not taken into account |
| 537 | Variant &1 assigned to line &2 (assignment to task list &3 is missing) |
| 538 | No authorization for product &1 in location &2 |
| 539 | Error when converting quantity unit &2 for product &1 |
| 540 | You have not entered a material for variant &1, it is therefore ignored |
| 541 | Higher-level phantom assembly of comp. variant &1 not in matrix |
| 542 | ---out of date--- |
| 543 | Characteristic value matrix was deleted |
| 544 | Serious error: at least one order is inconsistent (no production version) |
| 545 | Serious error. at least one order is inconsistent (no access) |
| 546 | At least one pegging area is missing in the liveCache |
| 547 | Component variant / activity matrices were deleted |
| 548 | Status matrix was deleted |
| 549 | 'Only explode detailed sched.matrix' w. 'sel. products' is not possible |
| 550 | Data source: &1 |
| 551 | Number of variants: &1 |
| 553 | Serious error occurred in the liveCache |
| 554 | LiveCache lock-conflict |
| 600 | Line balance not available |
| 601 | Production line does not exist |
| 602 | No line balance available |
| 603 | Initial line balance rate |
| 604 | Incorrect entry for time interval |
| 605 | Invalid parameter for the calculation of the production time interval |
| 606 | Error when calculating the production time interval: OUT_OF_RANGE |
| 607 | Production time interval set incorrectly |
| 608 | Active line balance not available |
| 609 | Error when reading activities in the LC -(lc_com_error/lc_appl_error) |
| 610 | Cannot display the capacity utilization |
| 611 | No activities available in liveCache |
| 612 | No capacity available for station &1 |
| 613 | Activity name not available for &1 |
| 614 | CMD &1 is not yet implemented |
| 615 | No activities have been found for time &1 |
| 616 | Production resource is not available for line &1 and line balance &2 |
| 617 | Connection to the liveCache is incorrect |
| 618 | No line balance rate is maintained |
| 619 | RMP is not set as active in the global RMP settings |
| 620 | Error in the initial status matrix for mat ID %1 loc ID %2 prod.ver. &3 |
| 621 | Error reading the matrix activities |
| 622 | RPM time series for &1 could not be completely created |
| 666 | The combination real-time reqmts and deleting crosses is not possible |
| 700 | Define characteristics filter |
| 701 | Char. filter &1 already exists and cannot be overwritten |
| 702 | Define new entry for characteristics filter |
| 703 | Characteristics filter &1 may not be given. Please redefine |
| 704 | Select a row |
| 705 | Select a maximum of one row only |
| 706 | Characteristics filter can only be deleted by its creator &1 |
| 707 | Characteristics filter saved successfully |
| 708 | Characteristics filter deleted successfully |
| 709 | Characteristic filter cannot be saved |
| 710 | Define long text in language &1 |
| 711 | Characteristics filter &1 has not yet been saved |
| 712 | Long text in basis language &1 cannot be deleted |
| 713 | Long text in language &1 was deleted |
| 714 | Delete not possible. Long text does not exist in language &1 |
| 715 | Characteristics filter could be be deleted |
| 716 | Dependencies can only be changed by creator &1 |
| 717 | Fill the required fields |
| 718 | Class type cannot be determined specifically |
| 719 | Planning matrices are not up-to-date |
| 720 | liveCache not available |
| 721 | &1 tables of periods were deleted |
| 722 | &1 tables of periods were updated |
| 723 | &1 error(s) during deletion of tables of periods (see application log) |
| 724 | Error occurred when reorganizing the tables of periods |
| 725 | &1 error(s) during update of tables of periods (see application log) |
| 726 | Error reading table of periods |