NJIT_MSG - NJIT Inbound message class
The following messages are stored in message class NJIT_MSG: NJIT Inbound message class.
It is part of development package NJIT_MODEL in software component LE-JIT-S2C. This development package consists of objects that can be grouped under "NJIT: Data Model/ CDS".
It is part of development package NJIT_MODEL in software component LE-JIT-S2C. This development package consists of objects that can be grouped under "NJIT: Data Model/ CDS".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | No authorization to '&1' |
| 002 | &2 cannot be performed on JIT Call &3, Comp Grp &4 |
| 003 | Delivery &1 is not marked for deletion; cannot perform '&2' |
| 004 | JIT Call has external status &1; cannot perform '&2' |
| 005 | Lifecycle status of JIT Call &1 cannot be set to completed |
| 006 | No authorization to perform action '&1' on JIT call &2 item &3 |
| 007 | Report can only run in a background job |
| 008 | Duplicate entries exist for 'Customer Supply Area' |
| 009 | Duplicate entries exist for 'Transmitted Status' |
| 010 | JIT Customer &1 cannot be activated, active JIT Call exists |
| 011 | Customer is activated |
| 012 | Customer is deactivated |
| 013 | Maximum value allowed for External JIT Number Usage is 9999 |
| 014 | Sales Organization &1 not found. |
| 015 | Log created successfully. |
| 016 | Supply control &1 cannot be deactivated, active JIT calls exist |
| 017 | Supply control number range issue |
| 018 | Supply control has been activated |
| 019 | Supply control has been set to inactive |
| 020 | Enter unloading point |
| 021 | Enter a valid External Status |
| 022 | Unloading Point entered does not belong to the customer &1 |
| 023 | Delivery creation for Component Group & due by & |
| 024 | Delivery creation date has passed for Component Group & by & |
| 025 | Shipping is pending for External JIT Call & by & hours |
| 026 | Planned shipping date has passed for External JIT Call & by & hours |
| 027 | Goods Issue for Component Group & due by & |
| 028 | Goods Issue date has passed for Component Group & by & |
| 029 | Log created successfully. |
| 030 | Scheduling Agreement could not be determined |
| 031 | Scheduling agreement item missing for Customer & and Customer Material & |
| 032 | Customer Supply Area is missing for JIT Customer & |
| 033 | Transmitted Status Mapping is not maintained for customer & |
| 034 | Supply Control ID is not maintained for JIT Customer & |
| 035 | Action is not maintained in customizing for Action Control & |
| 036 | Action & is not supported as per Internal Processing Status Customization |
| 037 | External Call Number missing |
| 038 | Customer Partner Description is missing |
| 039 | Customer Material is not maintained |
| 040 | Failed to generate package specification ID |
| 041 | Old package specification ID & is missing on update |
| 042 | Hierarchy is missing for the old child package & |
| 043 | Package specification ID & is missing in the database |
| 044 | Hierarchy is missing for the child package specification & |
| 045 | Package specification text ID does not exist for & |
| 046 | You cannot delete a draft entry. |
| 047 | Slot IDs are overlapping for the given package specification ID |
| 048 | Last slot ID & is greater than the total number of slots & |
| 049 | Last slot ID & is less than the total number of slots & |
| 050 | You cannot delete child package without removing dependencies |
| 051 | Enter a valid quantity for Component &1 of JIT Call &2 |
| 052 | Customer Description of Supplier is missing |
| 053 | Action not possible due to missing authorizations for sales area &1 &2 &3 |
| 054 | Action not possible due to missing authorizations for business partner |
| 055 | Delivery Creation Date is not determined for component group & |
| 056 | Delivery Creation Date & is in the past for component group & |
| 057 | Requirement DateTime is not maintained for component group & |
| 058 | Requirement DateTime & is in the past for component group & |
| 059 | Component Group Number is not determined |
| 060 | JIT Customer & is not activated or doesn't exist |
| 061 | External JIT Call Number & can be reused after & day(s) |
| 062 | Draft entry already exists for the External JIT Call Number & |
| 063 | Partner determination failed; missing confign for Customer &1, Vendor &2 |
| 064 | Maintain only one valid partner data customization for &1 and &2 |
| 065 | Maintain Ship-To Party Details |
| 066 | Component Material is not determined for Customer Material & |
| 067 | JIT Call &1 already exists |
| 068 | Component Group &2 already exists in JIT Call &1 |
| 069 | Item &3 already exists under component group &2 in JIT Call &1 |
| 070 | &1 is pending for External JIT Call &2 |
| 071 | &1 has passed for External JIT Call &2 |
| 072 | Please enter valid External JIT Call Number |
| 073 | Select packaging material |
| 074 | Enter total number of slots |
| 075 | Slot ID is not maintained |
| 076 | Select package specification ID |
| 077 | Select component group material |
| 078 | Select a different package specification ID |
| 079 | JIT customers cannot be created or changed due to missing authorizations |
| 080 | JIT Pckg Group cannot be created or changed due to missing authorizations |
| 081 | Packing specification is activated |
| 082 | Packing specification is deactivated |
| 083 | Packing specification is not activated |
| 084 | First slot ID must be an integer greater than zero |
| 085 | Last slot ID should be a positive integer |
| 086 | Slot increment should be a positive integer |
| 087 | Last slot ID should be greater than first slot ID |
| 088 | & is not a valid packaging material |
| 089 | Slot ID must contain only positive integers separated by comma |
| 090 | Total number of slots should be a positive integer |
| 091 | Package specification cannot be deactivated due to existing package units |
| 092 | Customer is not activated |
| 093 | JIT Calls exist for the Customer &1 |
| 094 | Supply Controls exist for the Customer &1 |
| 095 | Supply control &1 cannot be deleted, active JIT calls exist |
| 096 | Customer partner description or Active supplier is not maintained |
| 097 | Partial delivery is not allowed from sequenced JIT calls |
| 098 | Enter a valid delivery quantity |
| 099 | Enter a valid Reference Type |
| 100 | Duplicate entries exist for 'Reference Type' |
| 101 | Please enter valid Call Type |
| 102 | Please enter valid Material Usage Indicator |
| 103 | Please enter valid Vehicle Identification Number |
| 104 | Please enter valid Vehicle Model |
| 105 | Enter valid external sequence number |
| 106 | Maintain Reference Type |
| 107 | Reference Type & is not maintained for the customer & |
| 108 | &1 Reference Types with SAP reserved namespaces are not processed |
| 109 | &1 Reference Type with SAP reserved namespace is not processed |
| 110 | Supply control &1 cannot be activated, customer is inactive |
| 111 | Component Group Material is mandatory for Sequenced JIT Call |
| 112 | External Status is not maintained for component group & |
| 113 | Planned Shipping Date Time is not determined for component group & |
| 114 | Planned Shipping Date Time & is in the past for component group & |
| 115 | Material Availability Date is not determined for component group & |
| 116 | Material Availability Date & is in the past for component group & |
| 117 | Supply control not determined for Comp. Grp Matl &1, Cust. Supply Area &2 |
| 118 | Call Item Number is not determined for component & |
| 119 | Component is not maintained for the JIT/JIS Call |
| 120 | Reference Type & already exist at & level |
| 121 | Customer supply area missing or could not be determined for Comp.Group &1 |
| 122 | First reminder should be greater second reminder |
| 123 | Number range object & not found |
| 124 | Customer: &1 is not a valid JIT Customer |
| 125 | JIT Call &1 is Created |
| 126 | JIT Call &1 is Modified |
| 127 | Deletion of JIT call is not possible |
| 128 | Creation of component group is not possible |
| 129 | Modification of component group is not possible |
| 130 | Deletion of component group is not possible |
| 131 | Component Material &1 is Created |
| 132 | Component Material &1 is Modified |
| 133 | Component Material &1 is Deleted |
| 134 | Production Start Date is not determined for & in & |
| 135 | Production Start Date & is in the past for & in & |
| 136 | Production Version & is invalid for & in & |
| 137 | Production Version & validity is in the past for & in & |
| 138 | Production Version & validity is in the future for & in & |
| 139 | Production confirmation is success for Material &1 Mat.Doc &2 of &3 |
| 140 | Production confirmed for & of & component groups.View Logs for details |
| 141 | Component Group Material & is not valid |
| 142 | JIT Call &1 is not created |
| 143 | JIT Call &1 is not modified |
| 144 | Production Start Date has to be redetermined for & in & |
| 145 | Production Version has to be redetermined for & in & |
| 146 | Reference text &1 is created |
| 147 | Reference text &1 is modified |
| 148 | Reference text &1 is deleted |
| 149 | Please maintain threshold limit between 0 - 100 |
| 150 | Overdelivery tolerance value cannot exceed underdelivery tolerance value |
| 151 | Enter a valid Split Criteria |
| 152 | Enter a valid JIT call number |
| 153 | Action configuration missing for interlinked action &1. |
| 154 | Enter a valid value |
| 155 | Document is printed for &1 |
| 156 | Enter a valid component group number |
| 157 | Material Document & is created successfully for material & |
| 158 | Re-order status cannot not be included along with other statuses. |
| 159 | BAdi not implemented for custom action &1 |
| 160 | Scheduling agreement has no valid scheduling lines on requirement date & |
| 161 | Delivery Quantity does not meet underdelivery tolerance limit |
| 162 | Delivery Quantity does not meet overdelivery tolerance limit |
| 163 | Enter a valid sequence number profile |
| 164 | JIT calls present; change in profile could lead to inconsistencies |
| 165 | Enter valid Partner details |
| 166 | Invalid sequence no. or sequence no. profile contains invalid entries |
| 167 | Active sales agreement exists, delivery confirmation cannot be changed |
| 168 | Attempted to assign Handling Unit to this JIS call. Action cancelled. |
| 169 | Sequence no. contains invalid characters. Maintain a sequence no. profile |
| 170 | Call type of JIT call &1 does not match call type of supply control &2 |
| 171 | Production Version &1 is invalid for &2 |
| 172 | Production Version &1 validity is in the past for &2 |
| 173 | Production Version &1 validity is in the future for &2 |
| 174 | Deletion not possible as active JIT calls exist for this sched. agmt |
| 175 | Active JIT calls exist for Sales Scheudling agreement &1 |
| 176 | Select a single value for &1 |
| 177 | Customer Supply Area &1 does not belong to Ship-To Party &2 |
| 178 | Delivery Sequence Group &1 does not exist for Customer Supply Area &2 |
| 179 | Delivery Sequence Group &1 does not exist for Ship-To Party &2 |
| 180 | Delivery Sequence Group &1 does not exist for Plant &2 |
| 181 | Delivery Sequence Group &1 is not active |
| 182 | Technical Error. Please contact your administrator |
| 183 | Action &1 does not exist in the customizing |
| 184 | Document Category &1 does not exist |
| 185 | Select a Packing Strategy |
| 186 | Action Control configuration missing for action &1 |
| 187 | Self-billing is enabled for JIT Customer &1; agreement type is invalid |
| 188 | Consgmt Issue Ord. creation failed for item &1 in Deliv. Confmn &2 |
| 189 | Consgmt Issue Ord. &1 created for item &2 in Deliv. Confmn &3 |
| 190 | Self-billing is disabled for JIT Customer &1; agreement type is invalid |
| 191 | Handling units created successfully |
| 192 | nJIT Solution Activation Switch is not enabled |
| 193 | The change shall be applicable for newly created JIT calls |
| 194 | Sales doc. type & is not in sync with delivery confirmation control value |
| 195 | Outbound Delivery creation failed for Package &1 since no HU associated |
| 196 | Enter a valid Active Supplier |
| 197 | Please enter Requirements Date until. |
| 198 | Package Specification &1 cannot be deleted as it is used in package group |
| 199 | JIT call creation/update was failed for &1 |
| 200 | Enter a valid Partner Description |
| 201 | Item/s released successfully. Check Logs for more info |
| 202 | One or more components ignored by system due to missing basic data |
| 203 | Select Scrap Reason Code |
| 204 | Till Date is in the past |
| 205 | Cust.supply area &1 is incorrect with given unloading pt and assmbly locn |
| 206 | Cust. supply area is proposed based on unloading point and assembly locn |
| 207 | Enter a valid Quantity for the Component Material &1 |
| 208 | Enter a valid Delivery Confirmation Number |
| 209 | Enter a valid Buyer Call Item ID for the Component Material &1 |
| 210 | Enter a valid Component Material for the Item No &1 |
| 211 | No data exists for the provided selection criteria |
| 212 | Same Component &1 is not allowed more than once in Component Group &2 |
| 213 | Assignment of function '&2 (Action: &3)' to user &1 is invalid |
| 214 | Team member &1 not authorized to perform function '&2 (Action &3)' (&4) |
| 215 | Team member &1 doesn not exist |
| 216 | Team member &1 is locked |
| 217 | Handling units already exist for the provided selection criteria |
| 218 | Enter a valid Plant : &1 is invalid |
| 219 | Enter a valid Internal Processing Status : &1 is invalid |
| 220 | Enter a valid Sold to Party : &1 is invalid |
| 221 | Enter a valid Sales Scheduling Agreement : &1 is invalid |
| 222 | &2 is not a valid value for Responsibility Definition &1 |
| 223 | Invalid date format�specified in "&1": choose a value from the input help |
| 224 | Enter factory calendar; date calculation not possible |
| 225 | Extl status mappg for &1 and &2 does not exist in action control confign |
| 226 | Enter an external sequence number containing alphabets and numbers only |
| 227 | JIT Call &1 is in Edit mode/Draft mode |
| 228 | Maintain at least one parameter for Job execution |
| 229 | Enter the storage location or maintain default values for &1 |
| 230 | JIT Call &1 Comp. Grp. Material &2 already assigned to Packing Group &3 |
| 231 | Please enter valid Shipping Point : &1 is not valid |
| 232 | Please enter valid Unloading Point : &1 is invalid |
| 233 | Please enter valid Component Group Material : &1 is invalid |
| 234 | Please enter valid Customer Supply Area : &1 is invalid |
| 235 | Please enter valid Production Line : &1 is invalid |
| 236 | Please enter valid Production Version : &1 is invalid |
| 237 | Please enter valid Component Material : &1 is invalid |
| 238 | Please enter valid Production Confirmation Control : &1 is invalid |
| 239 | Please enter valid Component Group : &1 is invalid |
| 240 | Please enter valid External JIT Call Number : &1 is invalid |
| 241 | Enter a valid External Status : &1 is invalid |
| 242 | Package Specification ID &1 does not exist |
| 243 | Component Material &1 does not exist |
| 244 | Enter Material Usage from dropdown |
| 245 | Sold to Party determination failed for given &1, &2 and &3 combination |
| 246 | Multiple Sold to Parties determined for given &1 and &2 combination |
| 247 | Sold to Party determination failed for given &1 and &2 combination |
| 248 | Enter a valid Sales Organization : &1 is invalid |
| 249 | Enter a valid Delivery Sequence Group : &1 is invalid |
| 250 | Enter a valid Call Type : &1 is invalid |
| 251 | Enter a valid Supply Control : &1 is invalid |
| 252 | Enter a valid External Component Group Number : &1 is invalid |
| 253 | Enter a valid JIT Call Number : &1 is invalid |
| 254 | Enter a valid Partner Description : &1 is invalid |
| 255 | Enter a valid Distribution Channel : &1 is invalid |
| 256 | Enter a valid Division : &1 is invalid |
| 257 | Enter a valid Packing Group : &1 is invalid |
| 258 | Enter a valid Alternative Handling Unit No : &1 is invalid |
| 259 | Enter a valid Storage Location : &1 is invalid |
| 260 | Enter a valid Warehouse Number : &1 is invalid |
| 261 | Enter a valid Outbound Delivery : &1 is invalid |
| 262 | Enter a valid Confirm Production Status : &1 is invalid |
| 263 | Enter a valid Delivery Creation Status : &1 is invalid |
| 264 | Enter a valid Backflush Status : &1 is invalid |
| 265 | Enter a valid Goods Issue Status : &1 is invalid |
| 266 | Enter a valid Release to Production Status : &1 is invalid |
| 267 | Enter a valid Customer Material : &1 is invalid |
| 268 | Enter a valid External Comp Group Material : &1 is invalid |
| 269 | All mandatory fields are not maintained for Sequence JIT Call |
| 270 | Production Line &1 does not belong to Plant &2 |
| 271 | Verification Profile &1 does not belong to Team Category &2 |
| 272 | Create Outbound Delivery failed due to unavailable system resources |
| 273 | Expected sequence &1 is missing for Customer:&2, Plant:&3, AssemblyLoc:&4 |
| 274 | No authorization to Confirm Production |
| 275 | &1 without Status might lead to inconsistencies in the target application |
| 276 | Scan slot &1 first to proceed |
| 277 | Scan product &1 for slot &2 |
| 278 | Action &1 failed |
| 279 | Scan product &1 first to proceed |
| 280 | Changing default Interlinked Action setting for Actn &1 is not permitted |
| 281 | JIS Call &1 is with empty external sequence number |
| 282 | Handling Unit &1 created for Alternative Packing Group ID &2 |
| 347 | No product cost collector selected; check your entry for &1 |
| 490 | Packing Group Creation executed Successfully in Test Mode, &1 |
| 500 | ******************* Messages for NJIT Customizing *********************** |
| 501 | Invalid external status |
| 502 | Invalid internal status |
| 503 | Invalid action |
| 700 | *************** MESSAGES FOR NJIT AUTHORIZATION FAILURES **************** |
| 701 | No Edit Authorization for the current Ship-To-Party-Plant Combination |
| 702 | No Create Authorization |
| 703 | No Edit Authorization for the current Sales Area |
| 704 | No Edit Authorization for the current Ship-To-Party-Sales Ar. Combination |
| 705 | No Edit Authorization for Package Group Specification |
| 706 | No authorization to create delivery for JIT call &1 |
| 707 | No authorization to create delivery for Package &1 |
| 708 | No authorization to activate |
| 709 | No authorization to deactivate |
| 710 | No authorization to delete JIT relevant Deliveries |
| 711 | No authorization to change JIT relevant Deliveries |
| 712 | No authorization to create package unit for this JIT call |
| 713 | Alt Pck Grp. &1 created for JITCall &2,CompGrpMatl &3 assigned to Slot &4 |
| 714 | Alt Pck Grp. &1 updated for JITCall &2,CompGrpMatl &3 assigned to Slot &4 |
| 715 | Packing Grp. &1 deleted for JITCall:&2,CompGrpMatl:&3 assigned to Slot:&4 |
| 716 | Package Definition not found for Component Material &1 |
| 717 | JIS Call &1 not packed due to missing External Sequence Number |
| 718 | No authorization to update JIT call &1 |
| 719 | No authorization to create JIT call &1 |
| 720 | JIT Call &1 has been saved |
| 721 | No Authorization to delete Failed Stock Posting of Plant &1 |
| 722 | No Authorization to reprocess of backflush for Plant &1 |
| 723 | Component group &1 has been deleted from JIT call &2 |
| 724 | JIS Call &1 has duplicate Sequence Number &2 |
| 725 | Packing Grp &1 created for Sub-packing Group &2, assigned to Slot &3 |
| 726 | Packing Grp &1 updated for Sub-packing Group &2, assigned to Slot &3 |
| 727 | Packing Grp. &1 created for JITCall:&2,CompGrpMatl:&3 assigned to Slot:&4 |
| 728 | Packing Grp. &1 updated for JITCall:&2,CompGrpMatl:&3 assigned to Slot:&4 |
| 729 | Alt Pck Grp. &1 created for Sub-packing Group &2, assigned to Slot &3 |
| 730 | Alt Pck Grp. &1 updated for Sub-packing Group &2, assigned to Slot &3 |
| 800 | *************** MESSAGES FOR NJIT_ICALL ARCHIVING OBJECT *************** |
| 801 | No JIT Call according to the user�s selection criteria found. |
| 802 | JIT call is not archivable, because JIT is not completed. |
| 803 | Parts of the requested data is blocked. It is not displayed. |
| 804 | Please enter valid Customer |
| 805 | JIT Customer Exist |
| 806 | No Packaging Units according to the user�s selection criteria found. |
| 807 | Packaging Unit is not archivable, because it is not completed. |
| 808 | |
| 860 | *************DELIVERY SEQ. GROUP MESSAGES****************** |
| 861 | From value cannot exceed To value |
| 862 | Enter a value greater than the previous value &1 |
| 863 | Customer, plant, cust. supply area, and matl must exist for supply ctrl |
| 864 | Enter customer,cust. supply area, and plant to assign supply controls |
| 865 | Number ranges cannot have overlaps across rows |
| 866 | Number settings are already used in Sequence Group &1 and Level &2 |
| 867 | Number settings are overlaping with Sequence Group &1 and Level &2 |
| 868 | Enter description |
| 869 | Enter package unit level |
| 870 | Enter prefix |
| 871 | Enter From value |
| 872 | Enter To value |
| 873 | Enter suffix |
| 874 | Enter length of short number |
| 875 | Select customer supply control |
| 876 | Maintain same combination of customer, plant, and customer supply area |
| 877 | Select a valid supply control with &1, &2 and, &3 |
| 878 | Max. allowed length of generated number cannot exceed 20 characters |
| 879 | Customer, plant and supply. area are mismatching with suppl. controls |
| 880 | Supply Control &1 control is already assigned |
| 881 | Number range already consumed in Sequence Group &1 and Level &2 |
| 882 | Number settings not found for Sequence Group &1 and Level &2 |
| 883 | Selected group(s) are still in use; cannot be deactivated |
| 884 | Delivery Sequence Group &1 has been activated |
| 885 | Error occured while activating Delivery Sequence Group &1 |
| 886 | Delivery Sequence Group &1 has been deactivated |
| 887 | Error occured while deactivating Delivery Sequence Group &1 |
| 888 | Delivery Sequence Group ID &1 is already used |
| 889 | Enter a valid customer |
| 890 | Enter a valid customer supply area |
| 891 | Enter a valid plant |
| 892 | Delivery Confirmation has been processed |
| 893 | Customer/Ship-to-Party is not relevant for Delivery Confirmation |
| 894 | Action &1 can not be performed |
| 895 | Invalid JIT Call "&1" |
| 896 | Deliv. Conf. not expected for the material &1 of JIT Call &2 |
| 897 | Separate Deliv. Conf. expected for the Component &1 of JIT Call &2 |
| 898 | Deliv. Conf. not expected for re-ordered component &1 of JIT Call &2 |