O3 - IS-Oil: HPM messages (goods movements, QCI, deliveries)
The following messages are stored in message class O3: IS-Oil: HPM messages (goods movements, QCI, deliveries).
It is part of development package OIB_QCI in software component IS-OIL. This development package consists of objects that can be grouped under "QCI Quantity Conversion Interface".
It is part of development package OIB_QCI in software component IS-OIL. This development package consists of objects that can be grouped under "QCI Quantity Conversion Interface".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Volume correction factor is zero or negative: inconsistent customizing |
| 001 | Invalid working status |
| 002 | Invalid conversion mode |
| 003 | Error in the Quantity Conversion Interface (QCI) |
| 004 | Transaction & is missing from Table T180 |
| 005 | Entry with the same key already exists |
| 006 | Chemical analysis data fraction is not in the correct format |
| 007 | Target quantity &1 &2 and transaction quantity &3 &4 have opposite signs |
| 008 | Volume dimension has to be defined in Table T006D |
| 009 | Mass dimension has not been defined in Table T006D |
| 010 | Material/plant/storage location/batch combination does not exist |
| 011 | Transaction or function is only available for oil materials |
| 012 | All bulk materials require quantity conversion; maintain item & |
| 013 | Storage location not defined |
| 014 | Item not picked yet; conversion not possible |
| 015 | Material master not maintained correctly for IS-OIL |
| 016 | Step is not allowed for non-oil materials |
| 017 | Parameters are outside allowed ranges |
| 018 | Plant/material combination does not exist |
| 019 | Material/plant and storage location combination does not exist |
| 020 | UoM group & assigned to a material; not possible to change or delete |
| 021 | Manually-entered quantity in & is within the high-warning range |
| 022 | Manually-entered quantity in & is outside the error range tolerance (low) |
| 023 | Manually-entered quantity in & is outside the error range tolerance(high) |
| 024 | Manually-entered quantity in & is within the low warning range |
| 025 | Quantity Conversion Interface: import or export table & not defined |
| 026 | Quantity Conversion Interface: CALL SYSTEM - command line too long |
| 027 | Quantity Conversion Interface: conversion exit routine & not found |
| 028 | Quantity Conversion Interface: error in structure & |
| 029 | Quantity Conversion Interface: diff. parameters for table & conv. group & |
| 030 | Quantity Conversion Interface: Field OIB04-FMTYP: & not in range |
| 031 | Quantity Conversion Interface: No response from external programs |
| 032 | Quantity Conversion Interface: Func. Module Subroutine & not responding |
| 033 | Base UoM & not consistent with document base UoM & |
| 034 | Quantity Conversion Interface: Import parameters <> program parameters |
| 035 | Quantity Conversion Interface: export parameters <> ext. prog. parameters |
| 036 | Unit of measure for SI unit Kilogram not defined in Table T006 |
| 037 | Unit of measure for SI unit cubic meter is not defined in Table T006 |
| 038 | Quantity Conversion Interface: Error in external function/customer module |
| 039 | Update of appendix tables not possible; MSEGO2 documents are missing |
| 040 | Defaults have not been changed; saving is not necessary |
| 041 | Manually entered quantities have been reset and will be recalculated |
| 042 | Quantity Conversion Interface: Field & is too long |
| 043 | Delivery quantity is not defined for item & |
| 044 | Unit of measure does not have the dimension of a temperature |
| 045 | Quantity conversion defaults are reset and quantities are recalculated |
| 046 | Quantity overflow; & is larger than 9,999,999,999.999 |
| 047 | Dimension "dimensionless" is missing in Table T006D |
| 048 | Dimension "temperature" is missing in Table T006D |
| 049 | Material & not maintained in the material master |
| 050 | Plant & not maintained in the plant master |
| 051 | Storage location is not maintained for this material |
| 052 | The quantity table to be calculated has no entries |
| 053 | The quantity table to be calculated contains duplicate entries |
| 054 | Unit of measure does not have the dimension of a pressure |
| 055 | Density cannot be zero; enter a value greater than zero as density value |
| 056 | No unit of measure group is assigned to & and & |
| 057 | Unit of measure & not maintained in Customizing |
| 058 | Plant, material and date cannot be blank for default deter./creation |
| 059 | Gross weight recalculated to & &; previous value was & & |
| 060 | Batch has not been maintained for the material |
| 061 | Invalid material master record & |
| 062 | Oil quantity conversion cancelled |
| 063 | Compression factor = 1 is used for chosen set of base conditions |
| 064 | Plant is required for the Quantity Conversion Interface (QCI) conversion |
| 065 | & |
| 066 | Dimension "energy" is missing in Table T006D |
| 067 | No additional unit of measure quantity available for the item |
| 068 | Conversion group & is assigned to a material and cannot be deleted |
| 069 | Conversion group X..., Y..., Z... is reserved for customer name ranges |
| 070 | Conversion group & reserved for SAP, use X..., Y..., Z... |
| 071 | Conversion group already assigned to a material |
| 072 | Conversion group & not defined in Customizing |
| 073 | Source UoM group & not identical to target UoM group & |
| 074 | Manually-entered quantity affects other quantities that were calculated |
| 075 | Fixed & is missing for materials with product type 3 ("Chemicals") |
| 076 | Thermal expansion coefficient is required for Material |
| 077 | Unit of measure & not allowed for oil or natural gas quantities |
| 078 | BSW % fraction cannot be less than zero or greater than 100 % |
| 079 | Unrealistic BSW % value greater than 10% |
| 080 | Enter a numeric value |
| 081 | The quantity table contains an entry with an invalid unit of measure |
| 082 | The material/plant/storage location/batch/date range does not exist |
| 083 | Quantity Conversion Interface: More than & parameters for FMTYTP & |
| 084 | Insert Table OIB03 Key &1 &2 &3 &4 failed |
| 085 | Delete Table OIB03 Key &1 &2 &3 &4 failed |
| 086 | Update flag & for Table OIB03 unknown |
| 087 | Oil conversion default has been created |
| 088 | Oil conversion default has been changed |
| 089 | Oil conversion default has been deleted |
| 090 | Defaults not maintained for & & & & on OIB03 in the selected time frame |
| 091 | 'To date' & is more recent than 'from date' & |
| 092 | Table OIB09 contains entries from user &; no update possible |
| 093 | Attention: Documents have been archived ! Results may be incorrect ! |
| 094 | Dimension "pressure" is missing in Table T006D |
| 095 | Dimension "heating value (volume)" is missing in Table T006D |
| 096 | Dimension "density" is missing in Table T006D |
| 097 | SI unit for dimension "energy" not found in Table T006 |
| 098 | Defaults not maintained in Table OIB03 |
| 100 | Starting year is greater than year of period to be checked |
| 101 | Starting month is greater than month of period to be checked (same year) |
| 102 | Update of document & failed |
| 103 | Material has to be passed for the quantity conversion |
| 104 | Table OIB08 contains entries from user &; no update possible |
| 106 | SI unit for dimension "heating value" not found in Table T006 |
| 107 | The Oil BOM cost indicator can only be set for Oil BOMs |
| 108 | Oil BOM item cat. has to have same settings for hdr and comp. item cat. |
| 109 | No posting period found for company code & |
| 110 | Company code & not valid |
| 111 | & inactive default set will be saved and must be activated before use |
| 112 | Maximum number of tanks that are allowed per storage location reached |
| 113 | No default sets found for selection |
| 114 | Enter material document and year OR material OR plant |
| 115 | No materials selected |
| 116 | No plant found |
| 117 | Parameter &1 doesn't exist in the reading group &2. |
| 118 | No documentation exists for this field |
| 119 | Mandatory field: you cannot leave the field blank, enter data |
| 120 | Enter at least one valid plant |
| 121 | Oil content cannot be greater than 100% |
| 122 | Unit of measure group does not correspond with excise duty tax group |
| 123 | Unit of measure group does not exist |
| 124 | No valid entry found in Table & |
| 125 | No company codes exist in Table T001K |
| 126 | SI unit for "density" dimension not found in Table T006 |
| 127 | SI unit for "temperature" dimension not found in Table T006 |
| 128 | SI unit for dimension 'pressure' not found in Table T006 |
| 129 | Temperature value is not in the correct format |
| 130 | & is not in the correct format |
| 131 | Quantity & is not in the correct format |
| 132 | Temperature unit & not valid |
| 133 | There are entries in OIB08 |
| 134 | Other plants have posted stock and no excise duty group |
| 135 | Oil content cannot be zero if an excise duty group is assigned |
| 136 | Unit of measure & is not defined within the delivery or UoM group |
| 137 | You cannot maintain an oil content % without an excise duty tax group |
| 138 | Coefficient and fixed density/gravity only allowed for chemicals |
| 140 | Enter at least one valid material |
| 141 | Unit of measure & does not exist in this UoM group (BTCI) |
| 142 | Key specified for this entry does not exist |
| 143 | Air Bouyancy factor not maintained: Air buoyancy indicator is reset |
| 144 | Starting month is greater/eq. than actual period month of company code & |
| 145 | Month of period to be checked is greater/equal than act.month of c.code & |
| 146 | You already entered the same date you now want to set |
| 147 | Stock quantity for selected UoM is calculated using mat.master conversion |
| 148 | No conversion group assigned to material &, defaults cannot be maintained |
| 149 | Year of period to be checked is greater than curr. year of company code & |
| 150 | For field &, field content & is not allowed |
| 151 | No entries for unit of measure group & found in customizing table |
| 153 | Starting year is greater than current year of company code & |
| 155 | Air buoyancy factor not maintained in MARC for material &, plant & |
| 156 | Unit & has not been maintained in the unit table |
| 157 | All quantities are zero |
| 158 | Function not defined for a non-oil material |
| 159 | Tolerance level is not in the correct format |
| 160 | Unit of measure & is not consistent |
| 164 | Quantity recalculation was not carried out |
| 165 | No conversion mode maintained in Customizing |
| 166 | Pressure value is not in the correct format |
| 167 | Additional quantity in & not found, internal processing error |
| 169 | Table OIB09 could not be locked! |
| 170 | Oil BOM component and header density cannot be different |
| 171 | Condition VPRS determined finally during saving of the activity |
| 172 | Oil BOM header material has to be either a TDP or HPM material |
| 173 | Combination TDP/Oil BOM header and HPM/Oil BOM components not allowed |
| 174 | Cost summation cannot be carried out for oil BoM header item & |
| 175 | Enter density type before assigning a unit of measure to conversion group |
| 176 | Incorrect dimension: enter a dimensionless unit of measure |
| 177 | Incorrect dimension: enter a unit of measure with dimension density |
| 178 | Dimension "heating value (molar)" not found in Table T006D |
| 179 | Dimension "heating value (mass)" not found in Table T006D |
| 180 | Enter a unit of measure with dimension heating value (volume) |
| 181 | Enter a unit of measure with dimension heating value (molar) |
| 182 | Enter a unit of measure with dimension heating value (mass) |
| 183 | Enter the heating value type before you assign a unit of measure |
| 184 | Unit of measure has not the correct dimension |
| 186 | Unit of measure group required with conversion group or tax group |
| 187 | Incorrect product type for chosen conversion group |
| 188 | Conversion group cannot be changed because of posted stock |
| 189 | Excise duty tax group cannot be changed due to posted stock |
| 190 | UoM group cannot be changed because of stock posted |
| 191 | Conv. grp. cannot be entered because other plants have tax grp./stock |
| 192 | Other plants exist which do not maintain conversion group |
| 193 | Other plants exist which maintain conversion group |
| 194 | Other plants maintain excise duty tax group |
| 195 | Other plants exist that do not have excise duty tax group maintained |
| 196 | UoM group requires a conversion group and/or a tax group |
| 197 | Cannot maintain IS-Oil data without a valid plant |
| 198 | View is already maintained, only IS-Oil data may be maintained |
| 199 | Plant & segment already maintained, creation not allowed |
| 200 | No heating value has been entered; enter a test heating value |
| 201 | No quantity calculation carried out |
| 202 | Conv. grp. required, as other plants have conv. grp. and posted stock |
| 203 | Tax group required, as other plants have tax grp. and stock posted |
| 204 | Enter goods issue date for oil quantity conversion calculation |
| 205 | Zero count will only be set on the current screen |
| 206 | Select quantity conversion dialog box only with quantity <> zero |
| 207 | Observed test- or base-temperature is outside the ISO recommended range |
| 208 | Observed test- or base-pressure is outside the ISO recommended range |
| 209 | Base density or base heating value is zero; calculation fails |
| 210 | Database update of Table & failed, sy-subrc = & |
| 211 | Table OIB08 could not be locked |
| 212 | Tables T006 and T006_OIB do not match |
| 213 | QCI: Parameter & not defined in table OIB07 |
| 214 | QCI: Unit of parameter & is missing. |
| 215 | QCI: Parameter & not found in internal table |
| 216 | QCI: Structure & does not exist - internal processing error |
| 217 | QCI: Structure & field &: This field has a not supported data type |
| 218 | QCI: SGERG-88, pressure out of range |
| 219 | QCI: SGERG-88, temperature out of range |
| 220 | QCI: SGERG-88, no convergency #3 |
| 221 | QCI: SGERG-88, no solution |
| 222 | QCI: SGERG-88, conflicting input |
| 223 | QCI: SGERG-88, no convergency #1 |
| 224 | QCI: SGERG-88, no convergency #2 |
| 225 | QCI: SGERG-88, calculation N2 out of range |
| 226 | QCI: SGERG-88, calculation N2 and CO2 out of range |
| 227 | QCI: SGERG-88, conflicting result for N2 |
| 228 | QCI: For conversion goup &, use FMTYP & instead of & |
| 229 | QCI: test temperature and test pressure values and units are replaced |
| 230 | & inactive default sets will be saved and must be activated before use |
| 231 | QCI: Base temperature and base pressure values and units are replaced |
| 232 | QCI: Base density and base heating value have inconsistent parameters |
| 233 | QCI: No unit with a dimension ID "dimensionless" was found |
| 234 | Incorrect dimension: enter a unit of measure w. dimension dimensionless |
| 235 | Parameter conversion not supported for product type "chemicals" |
| 236 | Unit of measure or parameter is not passed to the QCI |
| 237 | Base density is calculated by the AGA c-code routines |
| 238 | Natural gas base density is not being calculated |
| 239 | Natural gas base heating value is not being calculated |
| 240 | Transaction unit of measure is initial |
| 241 | Transaction quantity is initial |
| 242 | Specify a parameter name |
| 243 | Duplicate field name & |
| 244 | Specify a field name |
| 245 | Field names of the parameter & and of the unit have to be different |
| 246 | Duplicate parameter name & |
| 247 | Insert a description of the parameter |
| 248 | Density type 4 (relative density air) is not allowed for liquid products |
| 249 | Parameter can not be chosen as default parameter; only display possible |
| 250 | Parameter does not require a unit of measure |
| 251 | Parameter does not require default value, material master value relevant |
| 252 | Conversion group not passed to the Quantity Conversion Interface (QCI) |
| 253 | SI unit for dimension "volume proportion" is missing in table T006 |
| 254 | Dimension "Volume proportion" is missing in table T006D |
| 255 | Incorrect dimension: BSW requires a unit of dimension "volume proportion" |
| 256 | Target unit of measure is initial |
| 257 | Product type and density type are not compatible |
| 258 | Time zone of plant & not consistent with time zone of other items |
| 259 | Not all fields are relevant for the selected product type |
| 260 | QCI : Conversion group - reading group relation not maintained for & |
| 261 | QCI : Reading group entry not present |
| 262 | Heating value classes are not consistent |
| 263 | Transaction can not be used anymore; use the new default transaction |
| 264 | Pressure value is not in the correct format |
| 265 | Entries for volume correction factors not found in customizing table |
| 266 | Temperature value out of range |
| 267 | API gravity can not be less than -131.5 |
| 268 | Density type is initial |
| 269 | AGA c-codes require correct temperature,pressure and density units |
| 270 | API c-codes require correct temperature unit |
| 271 | Density type has to be set to 4 for the chosen AGA conversion |
| 272 | Test density is calculated by the AGA c-code routines |
| 273 | AGA8:Error code 5: The root was not bounded in routine DGROSS |
| 274 | AGA8:Error code 6: No convergence in routine DGROSS |
| 275 | AGA8:Error code 7: Square root in routine VIRGS is negative |
| 276 | AGA8:Error code 8: Combined values of input parameters are inconsistent |
| 277 | AGA8:Error code 9: Invalid term in routine VIRGS |
| 278 | AGA8:Error code 11: Method was not 1 or 2 |
| 279 | AGA8:Error code 13: Flowing temperature (mat. temperature)is out of range |
| 280 | AGA8:Error code 12: Flowing pressure (material pressure) is out of range |
| 281 | AGA8:Error code 14: Heating value is not within the valid range |
| 282 | AGA8:Error code 15: Natural gas relative density is not in valid range |
| 283 | AGA8:Error code 16: Mole fraction of components is not in valid range |
| 284 | AGA8:Error code 17/37: Test (reference) temperature is out of range |
| 285 | AGA8:Error code 18/38: Test (reference) pressure is out of range |
| 286 | AGA8:Warning code 22: Flowing (material) pressure is within warning range |
| 287 | AGA8:Warning code 23: Flowing (material) temp. is within warning range |
| 288 | AGA8:Warning code 24: Heating value is within the warning range |
| 289 | AGA8:Warning code 26: Mole fract. of components is within the warn. range |
| 290 | AGA8:Warning code 25: natural gas relative density within warning range |
| 291 | AGA8:Error code 1: Pressure has a negative derivative |
| 292 | AGA8:Warning code 2: Density in bracket exceeds the maximum |
| 293 | AGA8:Error code 3: Maximum iterations exceeded in bracket |
| 294 | AGA8:Error code 4: Maximum iterations exceeded |
| 295 | AGA8:Error code 32: Flowing (material) pressure is out of range |
| 296 | AGA8:Error code 33: Flowing (material) temperature is out of range |
| 297 | AGA8:Error code 36: Mole frac. for at least one component is out of range |
| 298 | AGA8:Error code 39: Sum of mole fractions out of range |
| 299 | AGA8:Warning code 42: Flowing (material) pressure is within warning range |
| 300 | AGA8:Warning code 43: Flowing (material) temp. is within warning range |
| 301 | AGA8:Warning code 46: Mole frac.for at least one comp. within warn. range |
| 302 | AGA8:Warning code 49: Sum of mole fractions within a warning range |
| 303 | The number & is not in the correct format |
| 304 | Combustion temperature value for target energy is 0; no UoM specified |
| 305 | Thermal expansion coefficient can not be zero for product type 'chemical' |
| 306 | Natural gas test density is zero; enter a test density |
| 307 | Conversion handling indicator for nat.gas conversion group & not valid |
| 308 | Invalid density type passed to QCI (Quantity Conversion Interface) |
| 309 | Invalid indicator passed to QCI (Quantity Conversion Interface) |
| 310 | SAP routines for natural gas are not activated: Results will be reset |
| 311 | Base heating value class not defined in conversion group |
| 312 | Conversion Group & not assigned for physical properties data set |
| 313 | Unit of measure & not customized |
| 314 | Conversion parameters taken from first available reason code |
| 315 | Target unit of measure parameters not specified |
| 316 | Test or material temperature and unit for test density are not specified |
| 317 | Material temperature or target volume reference temperature out of range |
| 318 | Material pressure or target volume reference pressure out of range |
| 319 | Unit of measure & does not have a volume dimension |
| 320 | Conversion of structure to table failed |
| 321 | Conversion group is already assigned to an active delivery network |
| 322 | Internal table & has no entries, processing stops, contact administrator |
| 323 | Read IMG Documentation before activating the SAP natural gas routines |
| 324 | Unexpected internal table: & |
| 325 | This default set is active and cannot be changed or deleted |
| 326 | Default data sets have been successfully updated |
| 327 | Default set is inconsistent and cannot be activated |
| 328 | Default set has been checked and activated |
| 329 | QCI check results are inconsistent |
| 330 | Calculation results in a zero value for target quantity |
| 331 | Defaults could not be determined for raw material |
| 332 | Defaults could not be determined for liquid hydrocarbon product |
| 333 | Defaults could not be determined for natural gas product & |
| 334 | Specify either the plant or the material |
| 335 | Tables T006 and T006_OIB are consistent |
| 336 | & entries inserted into table T006_OIB |
| 337 | No parameter set found in quantity conversion default parameter table |
| 338 | Default set is inconsistent |
| 339 | & entries deleted from table T006_OIB |
| 340 | & (&) |
| 341 | Table T006 updated with data from T006_OIB |
| 342 | Change of conversion group changes the product type |
| 343 | Technical table entries are missing; QCI cannot perform any conversion |
| 344 | Table T006_OIB updated |
| 345 | SETID & not maintained in table OIB_PPP_HEADER |
| 346 | Table OIB_PPP_DATA not maintained for & & |
| 347 | & entries inserted into table T006D_OIB |
| 348 | No physical properties for & & available |
| 349 | Conversion error from & to & |
| 350 | Table T006D_OIB is consistent |
| 351 | Table T006D updated with data from old T006D |
| 352 | Update of Table T006D_OIB from old data failed |
| 353 | Transaction cannot be used; use transactions O3C1 or O3C2 instead |
| 354 | Transaction data is only available in test mode |
| 356 | Line & (OIL-material &): Additional quantity table is empty |
| 357 | UOM '&' not found in appendix table (material & plant &) |
| 359 | Material & / & Column &: MSEG-& not in quantity table/not consistent |
| 361 | Transaction unit of measure for BSW % has to be at ambient conditions |
| 362 | Target unit of measure for BSW % is defined at ambient conditions |
| 363 | Default sets have been activated without check |
| 364 | Material & does not exist |
| 367 | Unit of measure & does not have dimension & |
| 368 | Enter unit of measure for parameter value |
| 369 | Enter parameter value for unit of measure &1 |
| 370 | UoM & not available in table T006. |
| 371 | Material can not be selected for proportion or product unit function |
| 372 | Material can not be assigned to conversion group and/or excise duty group |
| 373 | Quantity differences found for material: & plant: & |
| 375 | Conversion group & is not consistent with material & and is corrected |
| 376 | Plant data not required and is deleted, conversion based on conv.group |
| 377 | Quantity in stock keeping unit can not be zero, enter a non zero value |
| 378 | Internal table & is not consistent with corresponding core table |
| 379 | Internal table & contains no entry for corresponding core table entry |
| 380 | The number of decimals should be less than & |
| 381 | Material document cannot be posted; quantities are not consistent |
| 382 | Material document can not be posted, MSEGO1 missing for line & |
| 383 | All converted defaults (OIB03) will be released for another conversion |
| 384 | Update of defaults successful; activate the saved inactive sets |
| 385 | Plant,storagelocation, transaction quantity and/or UoM and date missing & |
| 386 | Material missing for static quantity conversion |
| 387 | Posting of delivery is not possible; quantity values are not correct |
| 388 | QCI: RFC-Error: & |
| 389 | QCI: External API function not installed |
| 390 | QCI: External AGA function not installed |
| 391 | QCI: Calculation Failure - Junk Values Returned from External Routines ! |
| 392 | |
| 393 | |
| 394 | |
| 395 | |
| 396 | |
| 397 | |
| 398 | Parameters not found in material document table MSEGO1 |
| 400 | No parameter entries found for reading group & (conversion mode &) |
| 401 | No reading group specified for conv group & |
| 402 | Update of table & failed |
| 403 | Invalid conversion group: Product type is incorrect |
| 404 | Units of measure for stock quantities differ between tables & and & |
| 405 | Stock table entries not found |
| 406 | Update of Table & failed (& &) |
| 407 | Text for parameter & not maintained in language & in Customizing (O587) |
| 409 | Error occured for entry & & & & |
| 410 | Check at least one stock table for which report has to be executed |
| 411 | Unit of measure is initial |
| 412 | Oil content% cannot be changed due to posted stock |
| 413 | |
| 414 | |
| 415 | |
| 416 | |
| 417 | |
| 418 | |
| 419 | |
| 420 | |
| 421 | |
| 422 | |
| 423 | |
| 424 | |
| 425 | |
| 426 | |
| 427 | |
| 428 | |
| 429 | |
| 430 | |
| 431 | |
| 432 | |
| 433 | |
| 434 | |
| 435 | |
| 436 | |
| 437 | |
| 438 | |
| 439 | |
| 440 | |
| 441 | |
| 442 | |
| 443 | |
| 444 | |
| 445 | |
| 446 | |
| 447 | |
| 448 | |
| 449 | |
| 450 | Quantity conversion check failed for one item; all qty lines deleted |
| 451 | ED material quantity passed to IF not accurate; all qty lines deleted |
| 452 | Quantity conversion check failed for ED material;all qty lines deleted |
| 453 | No additional quantities imported from external application |
| 454 | No parameter set (MSEGO1) imported from external application |
| 455 | Negative additional quantity not allowed; posting not possible |
| 457 | Transaction quantity is zero, all additional quantities are set to zero |
| 458 | |
| 459 | |
| 460 | |
| 461 | |
| 462 | |
| 463 | |
| 464 | |
| 465 | |
| 466 | |
| 467 | |
| 468 | |
| 469 | |
| 470 | |
| 471 | Language & can not be converted or is not defined |
| 472 | Reading group & not maintained for language & , parameter & . |
| 473 | Material document or year are missing |
| 474 | Material document & in year & does not exist |
| 475 | Material document &, line & in year & does not exist |
| 476 | |
| 477 | |
| 478 | Material definition for & is inconsistent; quantity conversion terminates |
| 479 | |
| 480 | |
| 481 | |
| 482 | |
| 483 | |
| 484 | |
| 485 | |
| 486 | |
| 487 | |
| 488 | |
| 489 | |
| 490 | |
| 491 | |
| 492 | |
| 493 | |
| 494 | |
| 495 | |
| 496 | |
| 497 | |
| 498 | |
| 499 | |
| 500 | No data in table MARA available |
| 501 | Unit of measure group & not found in customizing table |
| 502 | History table records exist with stock, change not possible |
| 503 | Table & contains stock, changing the unit of measure group is not allowed |
| 504 | Synchronize all plants for this material with the same UoM group |
| 505 | & & |
| 506 | Material: &1 , no movement possible until &2 same across all plants |
| 507 | Usage of Oil material with MAA is not allowed, switch to single account |
| 508 | |
| 516 | |
| 517 | |
| 518 | |
| 519 | |
| 520 | |
| 521 | |
| 522 | |
| 523 | |
| 524 | |
| 525 | |
| 526 | |
| 527 | |
| 528 | |
| 529 | |
| 530 | |
| 531 | |
| 532 | |
| 533 | |
| 534 | |
| 535 | |
| 536 | |
| 537 | |
| 538 | |
| 539 | |
| 540 | |
| 541 | |
| 542 | |
| 543 | |
| 544 | |
| 545 | |
| 546 | |
| 547 | |
| 548 | |
| 549 | |
| 550 | |
| 551 | |
| 552 | |
| 553 | |
| 554 | |
| 555 | |
| 556 | |
| 557 | |
| 558 | |
| 559 | |
| 560 | |
| 561 | |
| 562 | |
| 563 | |
| 564 | |
| 565 | |
| 566 | |
| 567 | |
| 568 | |
| 569 | |
| 570 | |
| 571 | |
| 572 | |
| 573 | |
| 574 | |
| 575 | |
| 576 | |
| 577 | |
| 578 | |
| 579 | |
| 580 | |
| 581 | |
| 582 | |
| 583 | |
| 584 | |
| 585 | |
| 586 | |
| 587 | |
| 588 | |
| 589 | |
| 590 | |
| 591 | |
| 592 | |
| 593 | |
| 594 | |
| 595 | |
| 596 | |
| 597 | |
| 598 | |
| 599 | |
| 600 | Error in the Quantity Conversion Interface (QCI) |
| 601 | Gain posting: Final Tracking indicator has to be set |
| 602 | Goods Issue: A not-cancelled GI or a GR already exists for this item |
| 603 | Goods Issue Cancellation not possible: A GR already exists for this item |
| 604 | Goods issue reversal is not possible for two step transfer with G/L |
| 605 | Goods receipt reversal is not possible if gain already posted |
| 606 | Posting not possible: Final tracking indicator set previously |
| 607 | Goods receipt not possible: No goods issue exists for this item |
| 608 | Two-Step-Transfer gain is out of tolerance by &1 % |
| 609 | Goods receipt: A gain has already been posted for this item |
| 610 | More than one item found for material &1 and tracking number &2 |
| 611 | Two-Step-Transfer loss is out of tolerance by &1 % |
| 612 | Final transfer indication already set: Reversal is not possible |
| 613 | An internal error occured in the Two-Step-Transfer BADI-Implementation |
| 614 | Error reading table MSEGO1, MSEGO2 |
| 615 | Product type not found for material &1 on plant &2 |
| 616 | Density & is not in the correct format |
| 617 | Thermal expansion coefficient & is not in the correct format |
| 618 | Product type not found for conversion group &1 |
| 619 | QCI-Default Set changed due to change of date in document header |
| 620 | External tracking number has to be set |
| 621 | Table entry &1 for selected two-step-tracking record not found |
| 622 | Final tracking indicator set for selected two-step-tracking record |
| 623 | Material number '&1' of selected two-step-tracking record does not match |
| 624 | Plant '&1' of selected two-step-tracking record does not match |
| 625 | No two-step-transfer tracking information selected for 305 posting |
| 626 | Subsequent adjustment not supported for HPM-materials (use MB04 instead) |
| 627 | Cost center and / or account missing for plant &1 and / or &2 |
| 628 | Quantity adjustment factors not supported for HPM-materials |
| 629 | |
| 630 | |
| 631 | |
| 632 | |
| 633 | |
| 634 | |
| 635 | |
| 636 | |
| 637 | |
| 638 | |
| 639 | |
| 640 | |
| 641 | |
| 642 | |
| 643 | |
| 644 | |
| 645 | |
| 646 | |
| 647 | |
| 648 | |
| 649 | |
| 650 | |
| 651 | |
| 652 | |
| 653 | |
| 654 | |
| 655 | |
| 656 | |
| 657 | |
| 658 | |
| 659 | |
| 660 | |
| 661 | |
| 662 | |
| 663 | |
| 664 | |
| 665 | |
| 666 | |
| 667 | |
| 668 | |
| 669 | |
| 670 | |
| 671 | |
| 672 | |
| 673 | |
| 674 | |
| 675 | |
| 676 | |
| 677 | |
| 678 | |
| 679 | |
| 680 | |
| 681 | |
| 682 | |
| 683 | |
| 684 | |
| 685 | |
| 686 | |
| 687 | |
| 688 | |
| 689 | |
| 690 | |
| 691 | |
| 692 | |
| 693 | |
| 694 | |
| 695 | |
| 696 | |
| 697 | |
| 698 | |
| 699 | |
| 700 | |
| 701 | |
| 702 | |
| 703 | |
| 704 | |
| 705 | |
| 706 | |
| 707 | |
| 708 | |
| 709 | |
| 710 | |
| 711 | |
| 712 | |
| 713 | |
| 714 | |
| 715 | |
| 716 | |
| 717 | |
| 718 | |
| 719 | |
| 720 | |
| 721 | |
| 722 | |
| 723 | |
| 724 | |
| 725 | |
| 726 | |
| 727 | |
| 728 | |
| 729 | |
| 730 | |
| 731 | |
| 732 | |
| 733 | |
| 734 | |
| 735 | |
| 736 | |
| 737 | |
| 738 | |
| 739 | |
| 740 | |
| 741 | |
| 742 | |
| 743 | |
| 744 | |
| 745 | |
| 746 | |
| 747 | |
| 748 | |
| 749 | |
| 750 | |
| 751 | |
| 752 | |
| 753 | |
| 754 | |
| 755 | |
| 756 | |
| 757 | |
| 758 | |
| 759 | |
| 760 | |
| 761 | |
| 762 | |
| 763 | |
| 764 | |
| 765 | |
| 766 | |
| 767 | |
| 768 | |
| 769 | |
| 770 | |
| 771 | |
| 772 | |
| 773 | |
| 774 | |
| 775 | |
| 776 | |
| 777 | |
| 778 | |
| 779 | |
| 780 | |
| 781 | |
| 782 | |
| 783 | |
| 784 | |
| 785 | |
| 786 | |
| 787 | |
| 788 | |
| 789 | |
| 790 | |
| 791 | |
| 792 | |
| 793 | |
| 794 | |
| 795 | |
| 796 | |
| 797 | |
| 798 | |
| 799 | |
| 800 | |
| 801 | |
| 802 | |
| 803 | |
| 804 | |
| 805 | |
| 806 | |
| 807 | |
| 808 | |
| 809 | |
| 810 | |
| 811 | |
| 812 | |
| 813 | |
| 814 | |
| 815 | |
| 816 | |
| 817 | |
| 818 | |
| 819 | |
| 820 | |
| 821 | |
| 822 | |
| 823 | |
| 824 | |
| 825 | |
| 826 | |
| 827 | |
| 828 | |
| 829 | |
| 830 | |
| 831 | |
| 832 | |
| 833 | |
| 834 | |
| 835 | |
| 836 | |
| 837 | |
| 838 | |
| 839 | |
| 840 | |
| 841 | |
| 842 | |
| 843 | |
| 844 | |
| 845 | |
| 846 | |
| 847 | |
| 848 | |
| 849 | BAdI: You are not allowed to change the field content of & |
| 850 | BAdI: Field & is not ready for input. (Change is not taken over) |
| 851 | |
| 852 | |
| 853 | |
| 854 | |
| 855 | |
| 856 | |
| 857 | |
| 858 | |
| 859 | |
| 860 | |
| 861 | |
| 862 | |
| 863 | |
| 864 | |
| 865 | |
| 866 | |
| 867 | |
| 868 | |
| 869 | |
| 870 | |
| 871 | |
| 872 | |
| 873 | |
| 874 | |
| 875 | |
| 876 | |
| 877 | |
| 878 | |
| 879 | |
| 880 | |
| 881 | |
| 882 | |
| 883 | |
| 884 | |
| 885 | |
| 886 | |
| 887 | |
| 888 | |
| 889 | |
| 890 | |
| 891 | |
| 892 | |
| 893 | |
| 894 | |
| 895 | |
| 896 | Quantities have been changed in BAdI and are not synchronized |
| 897 | Quantity difference for UoM & found: & and & are out of tolerance |
| 898 | LINE_ID, PARENT_ID and LINE_DEPTH are not consistent for & |
| 899 | An unexpected error has occurred in the HPM/TD Interface |
| 900 | |
| 901 | |
| 902 | |
| 903 | |
| 904 | |
| 905 | |
| 906 | |
| 907 | |
| 908 | |
| 909 | |
| 910 | |
| 911 | |
| 912 | |
| 913 | |
| 914 | |
| 915 | |
| 916 | |
| 917 | |
| 918 | |
| 919 | |
| 920 | |
| 921 | |
| 922 | |
| 923 | |
| 924 | |
| 925 | |
| 926 | |
| 927 | |
| 928 | |
| 929 | |
| 930 | |
| 931 | |
| 932 | |
| 933 | |
| 934 | |
| 935 | |
| 936 | |
| 937 | |
| 938 | |
| 939 | |
| 940 | |
| 941 | |
| 942 | |
| 943 | |
| 944 | |
| 945 | |
| 946 | |
| 947 | |
| 948 | |
| 951 | |
| 952 | |
| 953 | |
| 954 | |
| 955 | |
| 956 | |
| 957 | |
| 958 | |
| 959 | |
| 960 | |
| 961 | |
| 962 | |
| 963 | |
| 964 | |
| 965 | |
| 966 | |
| 967 | |
| 968 | |
| 969 | |
| 970 | |
| 971 | |
| 972 | |
| 973 | |
| 974 | |
| 975 | |
| 976 | |
| 977 | |
| 978 | |
| 979 | |
| 980 | |
| 981 | |
| 982 | |
| 983 | |
| 984 | |
| 985 | |
| 986 | |
| 987 | |
| 988 | |
| 989 | |
| 990 | |
| 991 | |
| 992 | |
| 993 | |
| 994 | |
| 995 | |
| 996 | |
| 997 | |
| 998 | |
| 999 |