OC - IS-Oil: BDRP Bulk Distribution Requirement Planning messages
The following messages are stored in message class OC: IS-Oil: BDRP Bulk Distribution Requirement Planning messages.
It is part of development package OIJ_MD_BDRP in software component IS-OIL-DS-TSW. This development package consists of objects that can be grouped under "Package: TSW Master data for BDRP tank".
It is part of development package OIJ_MD_BDRP in software component IS-OIL-DS-TSW. This development package consists of objects that can be grouped under "Package: TSW Master data for BDRP tank".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Transaction & is missing from table T180 |
| 001 | Internal numbering will be used |
| 002 | Transaction mode is not valid. Transaction terminated |
| 003 | Number & is not within permitted number range |
| 004 | Entry already exists with Timestamp & & &. |
| 005 | The event '&' is not a valid event in silo management tank dips |
| 008 | BDRP control record was updated in this client |
| 009 | Table group authorization OII missing |
| 010 | Unspecified error on function call - current module pool & |
| 014 | Very few numbers left |
| 015 | Assigned number & is the last available number |
| 016 | No more numbers available for new storage object characteristic segment |
| 017 | Internal number range could not be automatically created |
| 018 | No more numbers available for new operations time window set |
| 019 | Number range interval & has not been defined |
| 025 | You do not have the authorization to create/change Tank Dip for tank & |
| 026 | You do not have the authorization to create/change/delete Defaults |
| 050 | DB ERROR, DB table= &, key= &, op= &, rc= & |
| 051 | Online delete not permitted for & |
| 052 | Invalid update code & detected for object & |
| 055 | ARRAY op error: DB table=&, op=&, rc=&, lines=& |
| 056 | SAVE op error: & unknown entries on & posting table, key= & & |
| 057 | SAVE op error: Unknown update type & on & posting table, key= & |
| 064 | Error in accessing the IS-Oil BDRP function exclusion table |
| 070 | Error during update of Storage Objects |
| 071 | Error during update of Meters |
| 072 | Error during update of Replenishment Parameters |
| 073 | Error during update of Site Control Parameters |
| 100 | Please enter a & |
| 101 | Entry & for & does not exist |
| 102 | Entry & does not exist |
| 106 | Tank & at storage location & plant & not found |
| 107 | Number range interval & has not been defined |
| 108 | UoM & does not exist in language & |
| 109 | Number of digits exceeds max. of & |
| 110 | Customer & is not a ship-to party - SO assignment not possible |
| 111 | Unknown object type for storage object segment assignment |
| 112 | Meter reading exceeds specified no. of digits |
| 113 | Customer & is not a ship-to party. Meter assignment not possible |
| 114 | Value 0 is not allowed for meter conversion factor |
| 115 | Customer & is not a Ship-to party - meter assignment not possible |
| 116 | Customer & is not a Ship-To party - site control is not valid |
| 117 | Unknown object type for meter assignment |
| 118 | For TSW-TD meter recon. max digits allowed & |
| 119 | Equnr. &1 is already assigned to the meter with seq no. &2 (locid=&3) |
| 121 | Delete table OIIGMMK key & failed (RC=&) |
| 122 | Update table OIIGMMKS key & & failed (RC=&) |
| 123 | Insert table OIIGMMKS key & & failed (RC=&) |
| 124 | Delete table OIIGMMKS key & & failed (RC=&) |
| 125 | General meter & has been created |
| 126 | General meter & has been changed |
| 127 | General meter & has been deleted |
| 128 | Material assignment validity not consistent with linked meter &1 |
| 130 | General meter cannot be linked to both Equipment and Funct.Location |
| 140 | Deletion of general meter assignment cancelled |
| 150 | Meter type & missing from GMM type definition table |
| 151 | Meter & has been created |
| 152 | Meter assignment processing cancelled |
| 153 | Meter & has been changed |
| 154 | Meter & has not been changed |
| 155 | Meter does not exist |
| 157 | Unknown error in Function Module OII_METER_DETAIL |
| 158 | Meter processing only possible after choosing a meter sequence number |
| 159 | No meters have been defined for & so far |
| 160 | Unknown error when retrieving customer indices for meters |
| 161 | More than one material currently assigned to the meter & |
| 162 | Meter deletion has been cancelled |
| 163 | Meters have been saved |
| 164 | Meters have not been changed |
| 165 | New meter reading smaller than previous one |
| 166 | End date must be larger than Start date |
| 167 | End time must be larger than Start time |
| 168 | Start date before allowed date |
| 169 | End meter reading smaller than start meter reading |
| 170 | New meter reading smaller than previous reading |
| 171 | No & specified for GMM access mode & |
| 172 | Old meter reading smaller than previous reading |
| 173 | Start meter reading smaller than previous meter reading |
| 174 | Start time before allowed time |
| 175 | Meter has been saved |
| 176 | Meter has not been changed |
| 177 | Meter reading history exists for meter with sequence number &1 |
| 178 | Overlapping periods for meters |
| 179 | This will close the old meter with sequence number &1 at date &2 time &3 |
| 180 | Internal error when closing old meter |
| 181 | Storage object has already been assigned |
| 182 | Only one storage object can be assigned to the meter |
| 200 | Storage object type & missing from SOC type definition table |
| 201 | No storage object class is assigned to the storage object type & |
| 202 | Storage object class & has been retrieved for the SOC type & |
| 203 | Storage object cannot be linked to both equipment and funct.location ! |
| 204 | Linked & & does not exist |
| 205 | & & does not exist |
| 206 | More than one material currently assigned to the SOC segment & |
| 207 | Number range interval & has not been defined |
| 208 | No segment data have been maintained for Storage objetc type & |
| 209 | Storage object characteristics have been saved |
| 210 | Storage object characteristics have not been changed |
| 211 | Deletion of assignment not possible on material level ! |
| 212 | Functional location & is not flagged for single installation |
| 213 | More than one equipment unit found for functional location & |
| 214 | No equipment unit is installed at functional location & |
| 215 | Please enter the capacity of the storage object segment |
| 216 | The unpumpable quantity cannot be greater than the total capacity |
| 217 | The permiss. cont. quantity cannot be greater than the total capacity |
| 220 | Index already exists |
| 221 | Error while retrieving data from internal table |
| 222 | Please select a column of a table control to sort the table entries |
| 230 | No & specified for SOCSEG access mode & |
| 231 | Unknown access mode within form & in module pool & |
| 232 | Storage object characteristic segment ID already exists |
| 233 | Storage object characteristic segment does not exist |
| 234 | Unknown error within function module OII_SOCSEG_DETAIL |
| 235 | Storage object processing is possible only after choosing a SOC segment |
| 236 | End and planned end date of assignment must be greater than start date |
| 237 | Storage object characteristics segment & has been created |
| 238 | Storage object characteristics segment & has been changed |
| 239 | Storage object segment assignment processing cancelled |
| 240 | Storage object segment deletion processing cancelled |
| 241 | Unknown response from POPUP_TO_CONFIRM_WITH_MESSAGE |
| 242 | No storage object characteristics have been defined for & so far |
| 243 | Storage object characteristic segment & has not been changed |
| 244 | Unknown error when retrieving customer indices for storage objects |
| 245 | Unknown error when retrieving location indices for storage objects |
| 246 | Cannot assign storage object to itself ! |
| 247 | Sequence number & does not exist for & |
| 248 | Sequence numbers not supported for storage object access mode & |
| 249 | Error encountered during SOCSEG delete processing, RC = & |
| 250 | End-date of the new assignment has been re-set |
| 251 | No sequence number could be determined for storage object grouping |
| 252 | Please select only one column |
| 253 | No other storage objects available for assignment to this storage object |
| 254 | Function code &1 not supported for control &2 |
| 255 | The entered storage object does not exist for location &. |
| 260 | Storage object characteristics taken over from location & |
| 261 | Customer linked to location & - SO characteristics found for customer |
| 262 | Storage object characteristics found at customer and location level |
| 263 | Displayed SOC segments are already the location SOC segments |
| 270 | No & specified for meter accessmode & |
| 280 | Tank assignment only possible for measurement point with type &. |
| 297 | Failure when reading screen fields |
| 300 | Customer / material combination is not valid |
| 301 | Stock levels for customer & have not been changed |
| 302 | Stock levels for customer & have been changed |
| 303 | Material does not exist |
| 304 | Meter & (&) is different from location meter index (&) |
| 305 | Access type A requires a material, service type, and equipment |
| 306 | Access type C requires a meter number |
| 307 | Access type E requires a material and equipment |
| 308 | Access type M requires a material |
| 309 | Access type S requires a material and a service type |
| 310 | Date validity from is required |
| 311 | Date and time validity from is required |
| 312 | Please assign material handling group first to business location |
| 313 | Material &2 is not defined in material handling group &1 |
| 314 | No duplicate keys allowed for meter access type &1 |
| 350 | Default Plant/St.Loc. for the location in object links not maintained |
| 351 | Maintenance only possible from business location &1 |
| 410 | Unspecified error when processing OTW set & & |
| 412 | Unspecified error when processing OTWS set & |
| 502 | Reference to storage object type & was successful |
| 504 | LVCC set was successfully copied from SO type & |
| 505 | No lin/vol conversion set was found for SO & |
| 506 | No lin/vol conversion set items were found for SO & |
| 507 | Unexpected return code &2 when processing LVCC set &1 |
| 508 | Unexpected return code & when processing item with index & |
| 509 | The LVCC set no. &2 was not expected in SOCSEG &1 |
| 510 | LVCC set with SOCSEG ID &1 already exists - error |
| 511 | Unexpected return code in delete item process, RC = & |
| 512 | At least one duplicate entry was deleted from the uploaded data |
| 513 | High order truncation error occurred at least once during the upload |
| 514 | No activation, when less than 2 lin/vol conversion set items were found |
| 515 | Number of decimal places in linear constant was not changed |
| 516 | A valid time entry is required |
| 522 | Unspecified error when processing linear constant & |
| 523 | Unspecified error when processing LVCC set number & |
| 524 | Unspecified error when reading LVCC item table for set number & |
| 529 | To delete an item, please place the cursor on a valid table entry |
| 537 | Reference type & has no LVCC set - request cancelled |
| 544 | Linear input value is less than the lowest LV constant |
| 545 | Linear input value is greater than highest LV constant |
| 546 | Unknown error when calculating volumetric value for linear input |
| 547 | Unknown error detected in CUSTOMER-FUNCTION '340' |
| 548 | Unknown error detected in BAdI OII_DIP_CALCULATION~MODIFY_CALCULATION |
| 549 | Error when preparing to delete LVCC set |
| 551 | Internal error - LVCC set was not specified in re-reference operation |
| 555 | Specified unit of measure & not of dimension type & |
| 556 | An unknown error occurred while checking UoM & |
| 560 | Download cancelled - no data found |
| 561 | LVCC download file & created - size & bytes |
| 562 | Error during download, return code = & |
| 563 | LVCC download cancelled |
| 564 | LVCC local file upload processing cancelled |
| 565 | LVCC set upload from local file successful |
| 566 | No previous calibration history sets found |
| 567 | No valid calibration history set found |
| 570 | Strapping table height entry already exists, new entry is deleted |
| 571 | LVCC set is consistent |
| 572 | LVCC set is not consistent - first found error is displayed |
| 573 | No activation possible, if strapping set is not consistent ! |
| 574 | Activation date and time not valid |
| 580 | Water height is higher than total height |
| 581 | Material density is zero |
| 590 | Unexpected return code when processing standard dialog box |
| 591 | Request cancelled |
| 600 | Delivery date of item & out of tank assignment validity period |
| 601 | Tank capacity is smaller than the order quantity of item & |
| 602 | Tank has different material from order item & |
| 603 | Tank ID of order item & not valid |
| 604 | Capacity compare not possible for sales unit & and storage unit & |
| 605 | Tank ID not valid for item &. Tank entry will be deleted |
| 606 | No tanks currently defined for item ship-to & |
| 609 | Table group authorization OIK missing |
| 701 | The time range is invalid |
| 702 | That lead time item already exists |
| 703 | Unspecified error when processing lead time entry |
| 705 | Time range overlap detected for & & - please re-specify |
| 706 | Plant & does not exist |
| 707 | Site control parameters for plant & do not exist |
| 709 | Time range overlap in time windows defining &1 - please respecify |
| 710 | Site sales hours referenced from standard sales hour set & |
| 711 | Sales hour set reference has been cleared - modification is possible |
| 712 | Error accessing sales hour set & |
| 716 | Factory calendar & does not exist |
| 717 | Operations time window reference set & does not exist |
| 718 | Unknown error during TW start and end time check - contact sys.admin. |
| 719 | Start time ( &1 ) should not exceed end time ( &2 ) - please correct |
| 720 | Unknown error in OTWS detail processing - contact system administrator |
| 721 | No time window set details have been created for set type &1 version &2 |
| 722 | Error when trying to process OTWS type input |
| 723 | Error when trying to delete entry with key & & & |
| 724 | Operations time window set type & does not exist |
| 725 | Operations time window reference set & does not exist |
| 726 | To view time window set detail - please select line with data |
| 727 | Time window applicability & does not exist |
| 728 | Error on conversion of time field & & |
| 729 | To delete lead time items, please select at least one entry |
| 730 | End time must exceed start time - please correct. |
| 731 | Start time is not changeable. Change back to &, delete and recreate entry |
| 732 | Weekday cannot be changed. Change back to &, delete and recreate entry |
| 733 | Sales order entry default group & does not exist |
| 734 | Default business location partner role & does not exist |
| 735 | Default consignment plant & does not exist |
| 736 | Default consignment storage location & & does not exist |
| 737 | To delete OTWS, please select at least one entry |
| 740 | Error on read of Operations Time Window Set data |
| 741 | Error during update of reference set & |
| 787 | Error during G/L posting in BADI OII_DIP_ANALYSIS~HANDLE_USER_COMMAND |
| 788 | Error while setting Customer fields in BADI OII_DIP_ADD_COLUMNS |
| 789 | Error while check Customer fields in BAdI OII_DIP_CALCULATION |
| 790 | Database error encountered when accessing site control parameters |
| 800 | Tank dip & already posted on & & from user & |
| 801 | End date of tank dip range must be greater than start date |
| 802 | Material & & not found in a tank at plant & storage location & |
| 803 | Check the non-special stock or at least one special stock indicator |
| 804 | Tank dips were posted succesfully |
| 805 | Materials in this tank: base UoM &, UoM group & and conv.group & |
| 806 | Assigned material segment of material & already assigned to tank & |
| 807 | Tax status check requires a valuation type specification |
| 808 | Incorrect material assignment of materials with product type '3' |
| 809 | Wrong material group: assigned mat.grp & <> new mat.grp. & |
| 810 | Wrong old material no.: assigned old mat.no. & <> new old mat.no. & |
| 811 | Wrong loading group: assigned load.grp. & <> new load.grp. & |
| 812 | Wrong ED tax group: assigned tax group & <> new tax group & |
| 813 | Wrong oil content: assigned oil content & <> new oil content & |
| 814 | Wrong mat.tax group: assigned mat.tax grp. & <> mat.tax grp. & |
| 815 | Wrong tax status: assigned tax status & <> new tax status & |
| 816 | Last material movement after end date of mat.assignment (& &) |
| 817 | Activation must be after & & |
| 818 | No tank assignment allowed for storage location & |
| 819 | No material assignment to tank found at date & time & |
| 820 | Dip data for tank & at plant & stor.loc. & time stamp & incomplete |
| 821 | No material assigned to tank until now |
| 822 | No dip date entered |
| 823 | Unrealistic dip - displaced volume & & greater than strapped volume & & |
| 824 | No material assignment to tank found between & & and & &. |
| 825 | No dip found |
| 826 | No tank specified |
| 827 | Tank dip below min.fltg roof height of &, no fltg.roof correction applied |
| 828 | Tank dip for tank & & & at & entered twice |
| 829 | End point in time must be larger than start point in time |
| 830 | Material assignment only possible with zero stock |
| 831 | Begin of material assignment must be after & & |
| 832 | No dip pair found to be analyzed in the given time range |
| 833 | End date is in future, no further goods movements are possible |
| 834 | Entered batch & has valuation type &, different from entered Val.type & |
| 835 | No deletion possible, goods movements posted after begin of assignment |
| 836 | No deletion possible, tank dip posted after begin of assignment |
| 837 | No deletion possible, goods movements were posted into this tank |
| 838 | No tank dip and goods movement possible, a related tank is blocked |
| 839 | No deactivation possible, calibration set already used for tank dips |
| 840 | Please enter a valid SOC type |
| 841 | Please enter a valid Measurement point |
| 842 | Customer defined User-Commands for G/L analysis must start with 'Z' |
| 843 | Stock in additional qty append. table inconsistent with table MARD/MCHB |
| 844 | Line & will be deleted. Plant/storage location/Tank details unknown. |
| 850 | No material documents found for the specified selection criteria |
| 851 | Tank capacity of & & smaller than volume at maximum height of & &. |
| 852 | Sum of planned capacities & & is greater than tank capacity & & |
| 853 | Tank capacity & & is below sum of planned cap. of the assigned mat. & & |
| 854 | Unit of measure of assigned planned material cap. was changed from & to & |
| 855 | Storage Object(s) exist referencing SOCtype &. So can't be deleted |
| 856 | Rerun "Create anal.data" report for stor.loc & tank &. |
| 857 | Tank not found |
| 858 | Report 'Create analysis data' should be rerun |
| 860 | Tank at plant & storage location & not found, but tank location exists |
| 861 | Tank & is blocked for use. So can not be used. |
| 862 | Tank & expiry is reached at this item schedule date |
| 864 | No valid SOC class found |
| 865 | Dip readings exist after & for the material & so validity can't be ended |
| 866 | New material start date/time cannot be same as that of other assignments |
| 900 | Stocks exist for & and so validity of assignment can not be ended. |
| 901 |