OIUME - Measurement messages

The following messages are stored in message class OIUME: Measurement messages.
It is part of development package OIU in software component IS-OIL-PRA. This development package consists of objects that can be grouped under "PRA Production and Revenue Accounting (Upstream Business)".

Message Nr ▲	Message Text
000	& & & &
001	Container category & does not exist.
002	Number range missing or invalid for category &.
003	Number range object & is missing.
004	Please enter container number for external no. range.
005	Container number is outside allowed range (& - &).
006	Do not enter container number for internal no. range.
007	Container & does not exist.
008	Number range error for & &.
009	Container & created.
010	Container & changed.
011	Container & not changed.
012	Container & already exists.
013	Enter a measurement source first of all.
014	Measurement source & does not exist.
015	Source object & does not exist.
016	Measurement type & does not exist.
017	Measurement type & not available for object & &.
018	No readings fo M.type & in & &.
019	This function is reserved for measurement experts!
020	Enter number in correct format: &
021	Observed reading & is missing for calculation &.
022	Derived reading & is missing for calculation &.
023	Derived reading & not provided by calculation &.
024	No characteristics found for reading type &, UoM Grp &.
025	Number range missing or invalid for measurement type &.
026	Number range object & is missing.
027	Document & posted.
028	Calculation & is in iterative loop.
029	Reading & is not available.
030	Enter fraction in 1/2, 1/4, 1/8 or 1/16.
031	Invalid fraction
032	Enter maximum of 11 inches.
033	Invalid number format
034	Invalid format, use &
035	Measurement system: Entry & not found in table &.
036	Measurement system: conversion error.
037	You must enter a default UoM if changes to Uom are not allowed
038	Measurement class & does not exist
039	Reading "&" requires a value between & and &
040	Value for reading "&" is outside the normal range of & to &.
041	Unit of measure & does not exist
042	Unit & not assigned to Unit of Measure Group &
043	Unit for reading '&' must have dimension '&'.
044	Reading '&' is missing.
045	Error encountered during document post.
046	No. of source documents differs from no. of measurements documents
047	Error encountered during document receive.
048	Error during transfer of reading & to source field &.
049	Error encountered during reading calculation
050	Measurement dialog invalid - more than one measurement type.
051	Value & is too large for this reading.
052	Measurement configuration missing for & &.
053	Measurement readings are missing for document & &.
054	Readings copied from & &.
055	Gas Lift Volume or Rate required when Gas lift indicator is entered.
056	Gas Lift Vol. and Rate cannot be entered when Gas Lift Indicator is space
057	& & & & UOM's were not the same
058	Measurement types must match for both reference and and key fields.
059	Hours prior indicator must be blank if Hours are entered
060	If Hours Prior are 0, Hours Prior Ind must be marked for continuous.
061	Invalid date format.
062	Invalid time format.
063	Average Time cannot exceed 24 hours and 0 minutes.
064	Test time cannot exceed 999 hours and 59 minutes.
065	For test and average time, seconds must be 0.
066	Either & or & must be > 0.
067	Lease Wide GOR and FGOR were both 0.
068	UOM Group was not specified for this entity.
069	When calculated test please do not enter gas volume and rate.
070	No readings found for measurement type &.
071	& volume and rate must be 0 based on well class: &.
072	BSW Percent must be < 100.
073	& volume and rate must be 0 based on producing method: &.
074	Required column & not found in transports for measurement type.
075	Measurement document & & is being changed by &.
076	& must have a value of 0 or 100.
077	& '&' not found in table &.
078	No values available.
079	Calculator: Overflow error.
080	Calculator: Zero divide error.
081	Number range & (measurement type &) must be internal.
082	If Gravity indicator is Absolute density gravity UOM is required
083	If Gravity indicator is not absolute density leave gravity UOM blank.
084	No Meaurement type found on cross reference table for product & &.
085	& & is not defined.
086	Please leave Producing Days blank this field is calculated.
087	Please leave Producing Hours blank this field is calculated.
088	Energy Volume and OBS Volume are required to calculate OBS Heating Volume
089	Producing days was not between 1 and number of days in the month.
090	Prod Hours must be less than or equal to number of hours within Prod days
091	Producing days is required when non-allocated or monthly frequency.
092	User entered Heating Value did not equal system generated Heating Value
093	OBS Volume is required when Energy Volume or Heating Value not entered.
094	Energy Volume is required if OBS Volume or Heating Value is not entered.
095	Allocated volumes can only be displayed.
096	MP & has no storage object.
097	Measurement Types could not be found for Meas Sys from user entered info.
098	When Density is entered Density type must be selected.
099	Meas.Type & Rdg.Group & not in work area.
100	Maximum number of decimals (&) has been exceeded for Meter Reading.
101	Maximum Number of Integer Digits (&) has been exceeded on Meter Reading.
102	Unknown error occured during meter reading digit determination.
103	Meter off reading was less than meter on reading.
104	Measurement type & not in work area.
105	Closing gauge level volume was greater than opening gauge level volume.
106	Please enter only Hours On OR Obs Volume.
107	Please only enter Throughput Volume or Obs Volume
108	Please enter Throughput Volume or Obs Volume.
109	Please enter Hours On OR Obs Volume.
110	Entered Obs Volume did not equal Calculated Volume.
111	Please enter Meter factor and Compression factor.
112	Please enter Hourly Rate or Obs Volume.
113	Hours entered cannot exceed hours in a month.
114	Gauge readings is required if any is entered.
115	Error found in measurement document
116	There are no readings to be checked.
117	There are no measurements to be calculated.
118	Error encountered during document send.
119	Messages for & ( & )
120	Invalid format during import of reading & in document & &.
121	Warnings encountered during calculations.
122	Calculator: Operation error
123	Invalid day of the month.
124	Invalid month.
125	Unable to convert Unit of Measure: &
126	Error when calculating energy to volume: &
127	Enter only two readings among Obs Heat value, Obs volume and Energy.