OIUPR - PRA Production Messages
The following messages are stored in message class OIUPR: PRA Production Messages.
It is part of development package OIU in software component IS-OIL-PRA. This development package consists of objects that can be grouped under "PRA Production and Revenue Accounting (Upstream Business)".
It is part of development package OIU in software component IS-OIL-PRA. This development package consists of objects that can be grouped under "PRA Production and Revenue Accounting (Upstream Business)".
Message Nr ▲ | Message Text |
|---|---|
| 000 | No well completions found for Field &. |
| 001 | Transp. Reference must be unique to a given Transp. and Eff Date Range. |
| 002 | Adjusted theoretical quantity less than allocated volume (WC: & |
| 003 | Delivery network does not exist |
| 004 | Delivery network allocation profile record not found |
| 005 | & & must be in the same network as & &. |
| 006 | Measurement point has invalid upstream node relationship. |
| 007 | No prod volume rows found for well completion |
| 008 | Measurement Point does not exist |
| 009 | No wells were found connected to a measurement point |
| 010 | Cannot assign a Gas Plant Delivery Network to itself. |
| 011 | Only one Transp. can be the default for a given MP/WC and Eff Date range. |
| 012 | Typification level must be greater or equal to compat level of network. |
| 013 | & must & & when frequency is &. |
| 014 | Eff to date must be <= current date when Volume Class is not estimated |
| 015 | Measurement Point or Well Completion must be specified |
| 016 | & & exists on & warning table. |
| 017 | Delivery Network & requires a Gas Plant & to exist. |
| 018 | No measurement points in the network support the product code and volume |
| 019 | Measurement point has invalid product code and volume type |
| 020 | Measurement Point & has an invalid Product Code & and Volume Type & |
| 021 | Commingled Well Completion & & has dated characteristics. |
| 022 | Network is a gas plant and no Gas Plant Measurement Point was found |
| 023 | Well Completion required when Transporter & Transporter ref not entered |
| 024 | & & & & must exist on WC to Transporter Cross Reference table. |
| 025 | Formula must have at least two detail records in order to be complete. |
| 026 | Enter only one of: Constant or Measurement Point, Product, Vol. Type |
| 027 | No data was found in the well completion variable data table |
| 028 | Originating Measurement point not allowed when WC is non-allocated. |
| 029 | Volumes not allowed for Measurement Point: & with status of inactive. |
| 030 | Material was not a valid processing product. |
| 031 | Product Code is inconsistent with the well class for the indicated WC |
| 032 | Contract is not effective for entire measuremnt point period. |
| 033 | Cannot delete MP/CT Xref if Ct. exists on Operated Residual Ct. Detail |
| 034 | Please select another & material. |
| 035 | Material/Volume Type must be on the MP Allocation Profile detail records. |
| 036 | MP Allocation Profile volume indicator must be required(1) or Optional(2) |
| 037 | When creating/changing in this dialog Volume Class must be designated. |
| 038 | Ticket Number cannot be duplicated for the same set of header keys. |
| 039 | Eff. from and to dates cannot overlap another range for the same keys |
| 040 | Characteristics missing for MP & on date &. |
| 041 | MP & is inactive on date &. |
| 042 | Please enter a Measurement Point or a Transporter No. |
| 043 | Default transporter taken from measurement point. |
| 044 | You must enter a transporter for volume type "&". |
| 045 | Record cannot be deleted due to a downtime effective date range |
| 046 | You must enter a transporter for MP type "&" with vol.type "&". |
| 047 | Customer & is not a valid transporter |
| 048 | Volume type "&" does not exist. |
| 049 | Measurement point & not found. |
| 050 | Measurement point derived from transporter cross reference. |
| 051 | Reference & is invalid for MP & and transporter &. |
| 052 | Measurement point & is not assigned to transporter & on &. |
| 053 | Transporter & was copied from MP cross-reference |
| 054 | Transporter reference & was copied from MP cross-reference |
| 055 | Please enter a measurement point. |
| 056 | MP volumes document & & does not exist or has been archived. |
| 057 | Delivery network derived from measurement point. |
| 058 | Please enter a delivery network. |
| 059 | Delivery network & not found. |
| 060 | Dated characteristics missing for network & on date &. |
| 061 | Measurement point & does not exist in network & on & for this frequency. |
| 062 | Please enter a product. |
| 063 | & is not defined as a product. |
| 064 | No allocation profile for product &, vol. type & on & for this freqency. |
| 065 | Product & is not allowed for volume type &. |
| 066 | Product & (&) is not allowed for measurement point type &. |
| 067 | Effective dates and production date must be in the same month. |
| 068 | Effective dates must be prior to entry date for actual volumes. |
| 069 | For monthly allocations production date is set to last day of month. |
| 070 | No measurement type found on Measurement Type determination table. |
| 071 | Product & is not allowed for volume type &. |
| 072 | Volume class set to "actual" for product &. |
| 073 | Please enter a "to" date that is on or after the "from" date |
| 074 | Measurement point & is not allowed for sales. |
| 075 | Unit of measure group missing for network group & and maj. product &. |
| 076 | Conversion group missing for network group & and maj. product &. |
| 077 | Number range missing for object &, range id &. |
| 078 | MP volumes posted with document & &. |
| 079 | Error in MP volumes header - see long text |
| 080 | Measurement type & does not exist |
| 081 | Error found during measurement point volumes posting |
| 082 | No fields to be transferred to MP volumes record |
| 083 | Reading & is not available for transfer in measurement type &. |
| 084 | Error transferring field & from measurement type &. |
| 085 | & Measurements posted with document & &. |
| 086 | Material & Vol Type & must exist in MPAP for specified MP and date range |
| 087 | No meas type found for Well Class: &, Producing Method: &, Test type: & |
| 088 | MP volumes & & not changed. |
| 089 | MP volumes & & changed. |
| 090 | All Return Lease Fuel Volume Types must be grouped. |
| 091 | Enter another valid & material. |
| 092 | Allocate Indicator must be marked for Non Gas Plants. |
| 093 | Material & VT & tied to a Measurement Point Allocation Profile record. |
| 094 | Messages for document &, measurement point &. |
| 095 | The sum of the commingled percentages must equal 100%. |
| 096 | Well Comp & & is already commingled with Well Comp & &. |
| 097 | Well Completion & & is a parent Well. |
| 098 | Downtime not allowed for Non-Producing well status. |
| 099 | Stream Type is invalid for the entered Well Completion. |
| 100 | Well Comp &1 &2 is already commingled with Well Comp &1 &3 effective &4. |
| 101 | Company & / Venture & does not exist for WC & & |
| 102 | Volume type & is not valid in the DN & Allocation Profile |
| 103 | Formula Number & does not exist in & table & &. |
| 104 | No record found in table & & &. |
| 105 | The WC does not exist in the network & for the date & |
| 106 | Unable to & record in table & & &. |
| 107 | & Measurements & with document & &. |
| 108 | MP volumes & type & already entered for &. |
| 109 | Well Completion & & & cannot be a child Downhole Commingled WL/WC |
| 110 | MP volumes document & & is held by another user. |
| 111 | No compound exists for the alias compound & on date & |
| 112 | Physical characteristics not maintained for alias compound & on date & |
| 113 | No MPAP Data exists for MP: & DN: & effective &. |
| 114 | No Sales Points exist for network &. |
| 115 | DN Meas Group must match that of the parent DN & Meas Group &. |
| 116 | Sales point & has no contract and is not measured production. |
| 117 | Sales Point & : No MP exists on & table and VT code in sales group |
| 118 | No quantities exist for sales point &. |
| 119 | No tolerance % exists for sales point &. |
| 120 | No allocation value exists for sales point &. |
| 121 | Sales Pt. & :Diff. between Sum Qty. and Allocation greater than Tolerance |
| 122 | Sales Pt. & : Summed Qty equals 0 and Allocation is greater than 0. |
| 123 | No ventures exist for termination point: & & |
| 124 | Invalid Venture or DOI for termination point : & & |
| 125 | Invalid Major Product Code for termination point : & & |
| 126 | No marketing group set up on & table for termination point: & & |
| 127 | Marketing Rep & exists on & table but not on &. |
| 128 | Marketing Rep & exists on MGDD and ACR tables but is not approved. |
| 129 | No termination point exists for network &. |
| 130 | TCM Code 'SW' does not allow WT Volume, TCM Ratio Code, or Test Quantity |
| 131 | Major Product Codes '4', '7', or '9' not valid |
| 132 | Ratio Code & must have Well Test Volume & & &. |
| 133 | Default MP & already exists as a Measurement Point for date range. |
| 134 | Valid ratio/wt vol combos: glr/g or n, gor/g or n, ogr/o, wgr/w, wor/w |
| 135 | & & is only valid for & & |
| 136 | Child Well Class cannot have a Well Class Dated record within date range. |
| 137 | Alternate WC Key must be unique. |
| 138 | Upstream Node must be different than Downstream Node |
| 139 | MP must exist in a Network for the effective date range. |
| 140 | The Network must have DN Meas Group with UOMs for Gas and NGL Major Pdts. |
| 141 | The Network must have a DN Measurement Group. |
| 142 | MP & must be assigned to a UoM Group. |
| 143 | MP Volumes & & deleted. |
| 144 | Venture must be the default WL/WC for Company, Venture, and date range. |
| 145 | Venture & and Company Code & do not exist as an E/P venture extension. |
| 146 | Venture & and Company Code & must be a Gas Plant Type. |
| 147 | Error determining PPN function. |
| 148 | Source MP & cannot source a chemical analysis from another MP. |
| 149 | Typ lvl, calc flag and ref fields must be blank when Source MP specified. |
| 150 | Typification level can not have more than one default typification id. |
| 151 | Typification cannot be & due to Chemical Analysis reference. |
| 152 | You must enter load oil details for this volume type. |
| 153 | Please enter well completion or measurement point. |
| 154 | Do not enter both well completion and measurement point. |
| 155 | Well completion & & does not exist. |
| 156 | Well completion & & has no variable data on &. |
| 157 | Extract Loss % only allowed for Gas Wells in Texas. |
| 158 | On a Create please do not enter seconds. |
| 159 | You cannot create a summary and Hour/Hour record on the same day. |
| 160 | This function requries an exact match on date/time and hour/summary Ind. |
| 161 | Frequency code was not daily (D) or monthly (M). |
| 162 | MPVL dated record exists for material & and volume type & |
| 163 | Well Completion cannot be a parent WC Downhole Commingled |
| 164 | That well completion is not in the network that was selected |
| 165 | Cannot delete Material &, VT &; MP Vols exist for date range. |
| 166 | Well Completion & & is a WC Downhole Comingled parent. |
| 167 | Material/Volume Type must be on the DN Allocation Profile detail records. |
| 168 | No entry on the UOM/Conv Group table for Meas Grp Id &, MAJPD & |
| 169 | Well Class & requires an & material. |
| 170 | Measurement Point required when Transporter & Transporter ref not entered |
| 171 | & & & & must exist on Measurement Point Transporter Cross reference table |
| 172 | Typ lvl, basis, type, and calc must be blank when Source MP specified. |
| 173 | Volume Type must be Measured Production or Allocation Volume |
| 174 | Major Product is already allocated to this MP in another Delivery Network |
| 175 | Table control not populated due to inappropriate data in NGCA table. |
| 176 | Table cntrl not populated due to bad data in NGCA and/or Comp Typ tables. |
| 177 | Please enter Heating Value Class, a default on MP Dated does not exist. |
| 178 | Error in Function & & & &. |
| 179 | Load Oil DN no is required. |
| 180 | Load Oil MP no or Well, WC no are required. |
| 181 | Load Oil Measurement Point and Well Completion cannot both be entered. |
| 182 | WC is a child downhole commingled record for date range. |
| 183 | Measurement Point can exist in, at most, two Delivery Networks |
| 184 | Cannot add this MP to a Delivery Network that is a fuel system |
| 185 | MP-&, requires a MPAP volume transfer record with vol required or opional |
| 186 | Can only add MP to multiple DN's if one and only one DN is a fuel system |
| 187 | A load oil recieved record exists for these load oil keys & & & & |
| 188 | Load Oil MP-& DN-& was not in a Network for date-& |
| 189 | Allocations must be the same for DN, MP's and WL/WC |
| 190 | Load Oil DN-& WL-& WC-& was not in a Network for date-& |
| 191 | Record not found with & properties. |
| 192 | Delivery Network cannot be a fuel system if MP is an inter-network node |
| 193 | RLF Consolidation Point can only be upstream of an RLF Usage Point |
| 194 | RLF Usage Point can only be downstream of an RLF Consolidation Point |
| 195 | RLF Consolidation Point can only be downstream of Well/Well Completion |
| 196 | Load oil Delivery Network cannot be the same as MP Volumes Delivery Net. |
| 197 | Enter Delivery network and effective from date before choosing a material |
| 198 | For Liquid Meter Volumes, a Meter Specification record is required. |
| 199 | A record already exists for this volume date/time range, from &/& to &/& |
| 200 | Unit of Measure, &, dimension must be & when type code &. |
| 201 | UoM & must be defined with & conditions when the Fuel Use Type is &. |
| 202 | MP does not exist in the Delivery Network for the effective date range |
| 203 | When MP Volumes is NGL Sales, Contract Number is required. |
| 204 | Contract Number & does not exist. |
| 205 | Contract type was not contract, take in kind, or take in kind valued. |
| 206 | No Measurement Points exist for Measurement Group &. |
| 207 | No valid Measurement Point Allocation Profile records were selected. |
| 208 | No records were selected to be created. |
| 209 | MP & does not exist in DN &. |
| 210 | Measurement Point & does not exist. |
| 211 | Conversion group was not found. |
| 212 | UOMG was not found. |
| 213 | Measurement Point Volumes created. |
| 214 | For tank measurements the effective from and to dates must be the same. |
| 215 | This volume cannot be maintained. Please use the Display transaction. |
| 216 | Load Transfer Received records cannot be modified. |
| 217 | No downtime tab is enabled in the configurable edits table. |
| 218 | When meter readings or line temperature are entered all are required. |
| 219 | Please only enter gauge readings or Observed volume. |
| 220 | Please enter gauge readings or Observed volume. |
| 221 | Entered volume does not equal tank gauge calculated volume. |
| 222 | Volume Indicator & is required for MP type & |
| 223 | Invalid Volume Indicator & for & DN or MP type & |
| 224 | These Measurement Points will create a circular reference within DN &. |
| 225 | Volume Indicator must be & for specified Volume Type |
| 226 | The specified Volume Type and Volume Indicator can only be used with a & |
| 227 | Formula not allowed for selected Volume Type |
| 228 | UoM & must not be defined with & conditions when the Fuel Use Type is &. |
| 229 | Please enter both source and destination clients. |
| 230 | Client you are copying to is not your logon client! |
| 231 | DN Link cannot be deleted. A MPAP record exists for date range. |
| 232 | Identical materials not allowed for VT calc production or total injection |
| 233 | Cannot simultaneously reallocate multiple Prod Dates for same DN, Freq. |
| 234 | There is already another DNAP row with this Sequence Number. |
| 235 | DNND maintenance is done through the Graphical Tool. |
| 236 | Enter Del. Ntwk, Meas. Pt. and Eff From Date before choosing material |
| 237 | Eff From Date must be <= current date when Volume Class is not Estimated. |
| 238 | No Delivery Network Alloc Profile found for DN &, freq &, and Date &. |
| 239 | Configuration requires the WC ID to be no more than two digits. |
| 240 | All Well Completions in a specific Field must have the same Company. |
| 241 | Measurement tables have been copied. |
| 242 | PPN data has been deleted. |
| 243 | PPN data was not deleted. |
| 244 | No Delivery Network records were found for DN & Freq & product & date & |
| 245 | No records were found to update for Subsystem &. |
| 246 | The Delivery Network Status has been updated. |
| 247 | Please enter Heating Value Class, a default on MP Dated does not exist. |
| 248 | Please enter Heating Value Class, a default on & does not exist. |
| 249 | This record cannot be created. Please see long text. |
| 250 | Major Product Code & is required when Ratio Code is &. |
| 251 | This is not a valid Major Product/Ratio Code combination. |
| 252 | Configuration does not allow a Plant DN TCM record to be inserted. |
| 253 | Please select a Unit of Measure without conditions. |
| 254 | Please enter a valid Material and Volume Type. |
| 255 | Please enter only Delivery Network or Well and Well Completion |
| 256 | Please enter Delivery Network or Well and Well Completion |
| 257 | Major Product Code, Frequency, and Effective From Date are all required. |
| 258 | There were construction errors found for this network - check for loop. |
| 259 | Frequency must be Monthly or Daily. |
| 260 | Please enter the exact effective from date for this BAPI. |
| 261 | Transporter reference number must be 20 characters or less in length. |
| 262 | Only one Well Test can exist per Test Date. |
| 263 | Please enter another Volume type. |
| 264 | Primary major product and dependent major product must be different. |
| 265 | Sum Daily must be initial when a Dependant Material/VT is specified. |
| 266 | Major product for dependnt material cannot be water in this situation |
| 267 | The product/dependant product combination is not allowed. |
| 268 | & is not a valid value for the Calculated Volume Type. |
| 269 | When RLF SUPPLIED and Allocate &, & RLF RECEIVED Volume Types must be &. |
| 270 | The GLG SUPPLIED Allocate indicator must match that of the GLG RECEIVED. |
| 271 | System is not configured to allow & for &. |
| 272 | Please make sure the seconds on Effective From Time are 00. |
| 273 | Please make sure the seconds on Test Time are 00. |
| 274 | & & uses internal no. assignments. Please leave the key blank. |
| 275 | Crude Type is only valid for MP Type & or & and MP Sales Point. |
| 276 | Eff From Date must be the same as the Eff From Date on MP Dated. |
| 277 | This record cannot be deleted. |
| 278 | Please enter a valid Material / Volume Type Combination from MPAP. |
| 279 | Please enter a valid Material / Volume Type combination from DNAP. |
| 280 | Errors found during send values to the measurement system. |
| 281 | Material & VT & must exist for the effective date range. |
| 282 | Well Completion & & was not in Delivery Network &. |
| 283 | Please select a Gas Plant Joint Venture. |
| 284 | Alloc Matl/VT must be checked for & & when it is used as a Dept Matl/VT. |
| 285 | Auto Flow Indicator must not be checked for Volume Type &. |
| 286 | Referenced Well No should be same as Parent Well No being created. |
| 287 | This record cannot be deleted due to an Authority issue; see long text. |
| 288 | This record cannot be deleted due to an Authority issue; see long text. |
| 289 | Contract Allocation data was copied from the previous dated record. |
| 290 | Volume Allocation data was copied from the previous dated record. |
| 291 | Valuation data was copied from the previous dated record. |
| 292 | Extract written to &. |
| 293 | Error occured writing Extract to &. |
| 294 | You do not have authority to submit Contract Allocation data. |
| 295 | You do not have authority to submit Volume Allocation data. |
| 296 | This record cannot be deleted. A WC Volumes record exists for this data. |
| 297 | This record cannot be deleted. A MP Volumes record exists for this data. |
| 298 | You do not have authority to change Contract Allocation data. |
| 299 | Meter Off is less than Meter On. A rollover has been assumed. |
| 300 | Effective From Date was not the last day of the month. See long text. |
| 301 | Effective To Date was not the last day of the month. See long text. |
| 302 | The entered MP was not in a Delivery Network. |
| 303 | The entered WC was not in a Delivery Network. |
| 304 | Effective To Date was not the same as the Effective From Date. |
| 305 | When Volume Type is Measured Production, the Major Product must be Gas. |
| 306 | IF Dept Matl, Dept VT, or Dept Dimension is entered all 3 are required. |
| 307 | Dept Dimension must be "Volume" or "Energy". |
| 308 | Ticket Number is required when MP Volumes type is NGL Sales. |
| 309 | When Test Temp. is entered Oil Density and Oil Density Type are required. |
| 310 | Invalid Volume Type entered for Volume Indicator Sys. Calulcated Volume. |
| 311 | Formula is only valid for a Volume Indicator of Formula ID Calc Volumes. |
| 312 | Formula is required when Volume Indicator is Formula ID Calc Volumes. |
| 313 | WC Supply Source Data has been copied to Supply Source Data. |
| 314 | Oil gravity should be in the range 10 - 99.9. |
| 315 | If MP Type is RLF Usage or RLF Usage is checked on MPD, VT Must be & & & |
| 316 | Invalid volume type. Please see long text. |
| 317 | Vol Type & requires MP Type of &, Volume Indicator of &, and no formula |
| 318 | Unable to derive required meter differential quantity at listed MP |
| 319 | Reclass Material cannot be found for Material &, Product &, Minor Prod & |
| 320 | Dependent volume not found for MP & : NGL allocation not possible |
| 321 | Dependent volume not found for MP & : Allocation not possible |
| 322 | NGL Inventory FIFO allocation not performed for Component allocations |
| 323 | & MP Vols exist for MP &, Trnsp &, Ref No &, and effective date range |
| 324 | Conversion Type must be 1 (convert to mole) or 2 (convert from mole) |
| 325 | Major Product and Minor Product not found for Material & |
| 326 | Unable to convert Mole Volume |
| 327 | DN Link cannot be changed. A MPAP record exits for MP & for date range. |
| 328 | Chemical analysis for MP 'mp' was not found. |
| 329 | Gas Plant TCM code not set for mp 'mp' prod cd 'pd_cd'. |
| 330 | Mol value for component carbon dioxide not found |
| 331 | Mol value for component Hydrogen sulphide not found |
| 332 | Producing Method Code is required when WC Status Code is Producing. |
| 333 | Weighted Average used to calculate Gas Lift Gas theoretical volumes |
| 334 | There is not detail data for Source MP records, you cannot change tabs. |
| 335 | DN Group & has no delivery networks |
| 336 | Choose either delivery network or delivery network group |
| 337 | Pressure Base in the DN Meas. Grp. is incorrect for the state of &4. |
| 338 | Starting node & & & & not found - all network nodes displayed |
| 339 | WL/WC & set to & status, since parent WL/WC & is in & status. |
| 340 | DN & and WL/WC & & are in different states with different Pressure Bases. |
| 341 | WL/WC & & and DN & are in different states &. |
| 342 | FUN MP and Inventory can not be processed |
| 343 | Contract & must be approved. |
| 344 | Processing of this record is not allowed. Please see long text. |
| 345 | Effective from date cannot be prior to the & &. |
| 346 | Delivery network status not found |
| 347 | Function & is not active in the system |
| 348 | WC/MP to Transporter Cross XREF does not exist for given details. |
| 350 | Enter at least one UOM: Liquid volume, Gas volume, Weight, or Heat Value |
| 351 | No Chemical Analysis records found for Typification Id & and Date &. |
| 352 | No Plant Component found for Hydrocarbon Component &. |
| 353 | Please do not enter Org Levels when the Premas Config Edit is off. |
| 354 | Error validating &. |
| 355 | All Well Completions in the same field must have the same Org Levels. |
| 356 | App. & was not found on the PPN table. Check spelling and letter case. |
| 357 | Reallocated record for WL/WC & Prd Dt & written to OIUH_PR_RWC table |
| 358 | Record not fnd on Reg Rpt Table, RWC Table not updated for WL/WC & Dt & |
| 359 | Inventory for WL/WC & & was derived from a DN other than processing DN &. |
| 360 | The Country/Region and Primary Geo location for WC & MP must be the same. |
| 361 | Unable to change RLF Usage Flag. MPAP records exist with RLF volume types |
| 362 | Unable to change RLF Usage Flag. MPAP records exist without RLF vol types |
| 363 | Unable to delete Formula Rules. MPAP records exist referencing Formula & |
| 365 | "Load Oil w/o Recovery" flag can only be selected for L1 volume types. |
| 379 | WL: & WC : & is upstream of more than one RLF MP |
| 380 | DN Alloc Seq 0 is not allowed with TCM = SW (Single WellCompletion ) |
| 399 | Please enter API WC NO in format "Char Num Num" only. |
| 400 | Report must be closed for production date. |
| 401 | Cannot create new report for the same well on the same production date. |
| 402 | Enter Well Completion, Well Group or Report with Production Date. |
| 403 | No Well/Well Completions exist for well group &. |
| 404 | Please enter well group or well/well completion |
| 405 | Volume type & is not valid in the MP & & Allocation Profile |
| 406 | Well Completion or Measurement Point must be entered if VT is entered. |
| 407 | If Well or Well Completion is entered the other is required. |
| 408 | A Well Completion Dated record does not exist for Well Completion & & &. |
| 409 | Well Completion and Measurement Point cannot both be entered. |
| 410 | A Delivery Network Dated record does not exist for Delivery Network & & & |
| 411 | A Measurement Point Dated record does not exist for & & &. |
| 412 | A record does not exist in DOIMP for MP &, Company &, Venture & Date &. |
| 413 | Measurement Point & was not an Inter-Network Node. |
| 414 | MP & was not the furthest upstream node in DN &. |
| 415 | Well Completion and FUN Measurement Point cannot both be entered. |
| 416 | A FUN Measurement Point can only be sourced from a Measurement Point. |
| 417 | FUN Measurement Point cannot be the same as the Measurement Point. |
| 418 | Sequence Number, Client, and Venture are all required. |
| 419 | The WC & & does not exist in the network & for the date &. |
| 420 | SKF Submission date must be the last day of the month. |
| 421 | No Cycle Segment Data exists for Drilling Days. |
| 422 | No SAP Statistical Keys exist for Drilling Days. |
| 423 | Deduct meter or Allocation meter was found downstream of Plnt Inlet meter |
| 439 | More than one PI and not sum field meters |
| 469 | Last Gas Product allocated at a different level than the calculated prod. |
| 470 | Component detail values not found. See long text. |
| 471 | Dependent product volumes not found for mp 'mp_no'. |
| 472 | Could not allocate volume to well completion. See long text |
| 473 | MPAP property not found. |
| 474 | Selection is not valid. See long text. |
| 480 | This record cannot be deleted due to an Authority issue; see long text. |
| 500 | Error on dependent MATNR - see long text |
| 501 | Theoretical inflation factor used without component allocation |
| 502 | DN & dated characteristics do not exist in table & |
| 503 | DN & does not exist in table & |
| 504 | DN Allocation Profile not found |
| 505 | Did not find reclass MATNR for & and PDCD & & on oiu_cm_rcls |
| 506 | 1-to-1 relationship between MP & and its upstream node must exist |
| 507 | No production volume rows found for wc |
| 508 | MP Dated Characteristics were not found for MP & |
| 509 | No data was found in OIU_PR_TCM |
| 510 | MP Allocation base was used for all associated product components |
| 511 | O/C Mix DN has inconsistent MPAP for material & |
| 512 | A tank battery MP is required in the structure of DN's that have tanks |
| 513 | A DN structure contains a tank battery, but has no associated tank MP |
| 514 | More than one tank battery exists in the DN structure |
| 515 | MST MP & has no upstream node connections |
| 516 | DN & does not have a Furthest Downstream Node |
| 517 | DN & has more than one Furthest Downstream Node |
| 518 | A MP Allocation Profile was not found for listed material and volume type |
| 519 | Inconsistency found in upstream MP's profile |
| 520 | Traversed from an oil or gas well without passing through a tank battery |
| 521 | Allocation MP doesn't have vt 01 or 80 |
| 522 | Delivery Network is a gas plant and no gas plant MP was found |
| 523 | A gas plant MP was found in a DN not specified as a gas plant |
| 524 | The well class code is invalid |
| 525 | Well completion DOI XREF was not found |
| 526 | The MP no longer exists in the DN |
| 527 | Characteristics for WellComp & / & not in table & |
| 528 | Well was not found on OIU_PR_WC |
| 529 | A gas plant inlet was not found within the structure of the Gas Plant DN |
| 530 | A gas plant inlet was found in a DN that is not a Gas Plant |
| 531 | Indicated material is inconsistent with the well class for the wc |
| 532 | Gas plant DN has more than one furtherst downstream node |
| 533 | Node is in an 'N', 'W', OR 'M' structure |
| 534 | Fuel system has a produced or purchased fuel point as FUN |
| 535 | The DN contains an RLF consolidated point that has no upstream node |
| 536 | A Plant Allocation Method was not found |
| 537 | Contracts do not exist for the plant venture number |
| 538 | Plant Allocation Methods were not found for the contract |
| 539 | MP does not exist in the DN |
| 540 | No Plant Allocation Methods exist for the contract where the MP is Xrefed |
| 541 | MP doesn't support the material associated with the Plant Alloc. Method |
| 542 | Multiple Plant Allocation Methods exists for upstream product code |
| 543 | Plant product not covered by Plant Allocation Method |
| 544 | MP not found in the DN |
| 545 | WC not found in the DN |
| 546 | A Plant Allocation Method must be defined at or upstream of the VCR |
| 547 | Listed node not found on internal table &3 |
| 548 | Multiple plants where found for the VRU |
| 549 | A chemical analysis header record was found without any detail records |
| 550 | Found compoenent vols at a MP while calculating a weighted chemical anal. |
| 551 | Chem. Analysis not found for a MP that needs vols. split into components |
| 552 | Chem. Analysis typification lvl incompatible with DN compatibility lvl |
| 553 | Contaminating % found for more than one material at the well |
| 554 | Different contaminating % found for material at a well |
| 555 | WC Alloc Base used to override the WC TCM/DN TCM for the listed Well/WC |
| 556 | DN Profile internal table is empty |
| 557 | MP internal table is empty |
| 558 | WC internal table is empty |
| 559 | WC Profile internal table is empty |
| 560 | No Plant Allocation Method found for gas plant or GPOP |
| 561 | Gas Lift Supply MP does not exist in traverse path of GLG reciept MP |
| 562 | RLF Supply MP is not in traverse path of RLF receipt MP |
| 563 | Fuel Usage calculation function experienced severe error |
| 564 | Unable to create MP volume using sum daily MP Volumes vli |
| 565 | At least one daily allocation volume is missing for the processing period |
| 566 | Unable to determine TCM function call for TCM & |
| 567 | The material for metered plant inlet was selected for allocation. |
| 568 | A volume was not found for the matnr/vt |
| 569 | The mp has no assigned profiles for the current allocation |
| 570 | Unable to determine default heating value |
| 571 | Required MP volume was found at a MP where volume entry was not allowed |
| 572 | No MP volume was found for a MATNR/VT in the DN Allocation Profile |
| 573 | A WC does not exist immediately upstream of MST MP & |
| 574 | Well Test used to for MST volume calculation was more than 1 year old |
| 575 | Unable to find default &1 on table &2 |
| 576 | Heating value changed to equal default MP heating value |
| 577 | NGL Run Tickets will not be summed |
| 578 | Component volume found is not compatible with the DN Compatibility lvl |
| 579 | NGL or Residue material volume exist in a GPOP |
| 580 | Temperature is outside the range of water property table |
| 581 | A saturated MP exists within a Dry DN |
| 582 | Unable to convert a MP volume to Moles |
| 583 | A required well test was not found |
| 584 | Well Test more than 1 year old |
| 585 | Sum NGL ticket vol encountered while calculating a weighted chem analysis |
| 586 | Volume encountered that spans multiple chemical analysis |
| 587 | Unable to find MP Fuels Spec. for MP & & & |
| 588 | Unable to find MP Liquid Throughput for MP & |
| 589 | Unable to find Producing DN for MP & |
| 590 | Unable to find Material and Volume Type for Producing DN & |
| 591 | Unable to find Auto Flow Flag for Producing DN & |
| 592 | Unable to find MP Volumetric Data for MP & |
| 593 | Unable to perform Summed Daily Volume when Frequency Code is & |
| 594 | GLG Receipt MP does not exist in traverse path of Gas Lift Supply MP |
| 595 | RLF Receipt MP is not in traverse path of RLF Supply MP |
| 596 | Formation percentage must be between 0 and 100% |
| 597 | Error when converting Date to timestamp: & |
| 598 | Header Plant Allocation Method info not found for contract & effective & |
| 599 | Detail Plant Allocation Method info not found for contract & effective & |
| 600 | Processing product not covered by a plant allocation method |
| 601 | A Measurement Point tied to the contract does not support the product |
| 602 | No PAM data exists for the contract to which the MP is cross referenced |
| 603 | FATAL: HEADER FIELDS MUST HAVE CONSISTENT & TO CALCULATE WGHTD AVG & |
| 604 | FATAL: THE WRONG TYPE OF CHEMICAL ANALYSIS WAS FOUND FOR VOLS AT MP & |
| 605 | FATAL: TYPIFICATION LVL OF CHEM ANALYSIS ISN'T COMPAT W/ NTWK COMPAT LVL |
| 606 | FATAL: VOL WAS FND AT THE MP THAT IS INVALID, BASED ON THE CHEM ANALYSIS |
| 607 | FATAL: CHEM ANALYSIS CONTAINED NON-ZERO MOL % OR VOL % FOR A COMPONENT |
| 608 | FATAL: THE MP NEEDED A WEIGHTED AVERAGE CHEMICAL ANALYSIS CALCULATED |
| 609 | FATAL: AN INVALID COMPONENT VOLUME WAS FOUND WHILE CALCULATING A VOL |
| 610 | FATAL: PLANT &1 SPECIFIED FOR &2 ISN'T COMPATIBLE WITH COMPONENT &1 FLAG |
| 611 | Multiple plant allocation methods exist for the listed FUN |
| 612 | FATAL: A CHEM ANALYSIS CAN NOT BE DERIVED FROM RESULTS OF A FORMULA VOL |
| 613 | WARNING: A CHEM ANALYSIS WAS CALCULATED FROM RESULTS OF A FORMULA VOL |
| 614 | FATAL: DUPLICATE RECORD VOL. ALREADY EXISTS; MAYBE CALCULATED |
| 615 | FATAL: TOP LVL ALLOC OR DEDUCT METER NOT FOUND WH/ CALCT PLANT INLET VOL |
| 616 | FATAL: A PHYSICAL CONSTANT VALUE IS NOT FOUND ON TABLE |
| 617 | FATAL: COMPONENT CROSS-REFERENCE NOT FOUND |
| 618 | FATAL: COMPOUND ALIAS CROSS-REFERENCE NOT FOUND |
| 619 | FATAL: VOL CALC FORMULA SPECIFIED USE OF NON-EXISTING VOL FROM ANOTHR MP |
| 620 | FATAL: REF ANAL MEAS PT MUST NOT REFERENCE ANOTHER MEAS POINT |
| 621 | FATAL: THE PLANT INLET CALC METHOD MUST BE '1' - SUM OF THE FIELD METERS |
| 622 | FATAL: THE RESULT OF A FORMULA WAS NEGATIVE |
| 623 | FATAL: NO CHEM ANALYS COMPATIBILTIY CD FOUND FOR &1 &2 OF &1 &2 OP PROP |
| 624 | Contaminating percents found for more than one product at listed WL/WC |
| 625 | Different contaminating percents found for a product at listed WL/WC |
| 626 | Well Completion &/& is contaminated |
| 627 | PAM specified for the product is not compatible |
| 628 | Unable find info on Chem Analysis Compat Cmpnt XRef table for listed code |
| 629 | Unable to calc. weighted average chem. anal for non-system calc. analysis |
| 630 | Volume was encountered that has a pipeline transportation method |
| 631 | No Plant Allocation Methods were found for a gas plant |
| 632 | FATAL: CURRENT FORMULA REQUIRES AN & NODE VOL TO COMPLETE THE CALC |
| 633 | Cannot Calculate formula volume - Formula No & is invalid, MP = & |
| 634 | FATAL: WELL COMPLETION PROFILE IS MISSING A DEPENDENT PRODUCT CODE |
| 635 | FATAL: THE VOLUME CANNOT BE CALCULATED WHEN DIVIDING BY ZERO |
| 636 | FATAL: MP IS OUTSIDE THE NETWORK BEING PROCESSED, SO NO VOLUMES WERE FND |
| 637 | FATAL: COMPONENT VOL INVALID FOR & FOR WHICH THE VOL IS BEING CALCULATED |
| 638 | FATAL: COMPONENT VOLUME IS NOT COMPATIBLE WITH NTWK COMPATIBILITY LVL |
| 639 | FATAL: INCOMPATIBLE VOLUMES EXIST AT THE MP |
| 640 | No vol found for a MP/PROD CD/VT that was referenced by MP & |
| 641 | FATAL: THE NETWORK COULD NOT BE DETERMINED FOR A MP & IN A FORMULA NO & |
| 642 | Invalid Well Class for WL/WC &/&, Prod &, and VT & |
| 643 | The system calc. 0 days/hrs up for the listed wl/wc |
| 644 | FATAL: WELL COMP NOT FOUND DETERMINING UPTIME |
| 645 | WARNING: MMBTU ALLOC WAS REQUESTED. NO WELL TEST OR CHEM ANALYSIS FND |
| 646 | & Date is more than 12 months old |
| 647 | FATAL: UNESTABLISHED DEPENDENCY OF &1 / &2 EXISTS AT WC &3 |
| 648 | GLG is setup on the DNAP, but no WC has a producing method of "Gas Lift" |
| 649 | A required mp volume was not found downstream of & & |
| 650 | Did not prorate the volume & across multiple wl/wc's |
| 651 | Successful daily allocations for each day of the month do not exist. |
| 652 | Required Daily WC Disposition Volumes not found for production month |
| 653 | Measurement Point & does not have a Default Transporter. |
| 654 | WARNING: REQUIRED NUMBER OF WELL TESTS SPECIFIED ON & WERE NOT FOUND |
| 655 | WARNING: THE CALCULATED THEO VOL FOR & WAS 0 |
| 656 | WARNING: THE CALC. THEO VOL FOR THE DEP MATNR IS 0 |
| 657 | FATAL: THEORETICAL RATIO EXCEEDS 99999.999999 |
| 658 | FATAL: ALL DEPENDENCIES HAVE NOT BEEN ESTABLISHED CORRECTLY |
| 659 | WARNING: A DEPENDENCY ERROR HAS OCCURRED |
| 660 | Material & is not found in the Reclass. of Production Codes table. |
| 661 | Adjust the commingled percent as WC & & is already commingled with WC & & |
| 662 | WC & & has the status & |
| 669 | WARNING: WELL TEST GAS LIFT GAS RATIO IS ZERO |
| 673 | WC Theoretical Volume can not be derived |
| 674 | At least 1 WC TCM has a WT MAJPD CD different from the other WC TCM's |
| 675 | WARNING: WC THEORETICAL FOR ACTIVE WC DOES NOT CONTAIN 1ST OF PROD MONTH |
| 676 | FATAL: WC NOT IN &1 TABLE AND ALLOCATION BASE WAS NOT ENTERED FOR WC |
| 677 | FATAL: CHEMICAL ANALYSIS TYPE INCOMPATIBLE WITH TCM TYPE |
| 678 | FATAL: UNKNOWN GAS PLANT THEORETICAL CALC METHOD ENCOUNTERED |
| 679 | FATAL: TCM REFERENCES A CMPNT NOT FOUND IN THE CHEM ANLAYSIS |
| 683 | FATAL: A CHEMICAL ANALYSIS RECORD WAS NOT FOUND |
| 684 | FATAL: CHEM ANALYSIS NOT FOUND FOR WC WHEN BREAKING THE 203 &1 INTO &2 |
| 685 | FATAL: & FOR ALLOCATION BASE DOESN'T MATCH 4TH & AT OTHER WCs IN NTWK |
| 686 | FATAL: ALLOC BASE NOT FOUND. CAN NOT COMPUTE NEW MOL PRCNT FOR 4TH &1 &2 |
| 695 | WARNING: A PRIOR PERIOD INV.VOL. RETRIEVED FOR A WC IN DIFFERENT DN |
| 696 | FATAL: WC PROFILE FOR & DOES NOT PERMIT THE ALLOC OF BEG INV |
| 699 | WARNING: ALLOC PROCESS DETERMINED THAT INVENTORY MATERIAL HAS CHANGED |
| 700 | FATAL: ONE OR MORE OF THE DAILY ALLOC WHERE UNSUCCESSFUL |
| 701 | FATAL: THE ALLOC OF & IS DEPENDENT UPON ANOTHER MATERIAL FOR ALLOCATION |
| 702 | A required dep_matnr/dep_vt volume was not found |
| 703 | Reduction in inventory greater than dispositions allocate to well(s) |
| 704 | Calculated production is less than ZERO and not an injection well |
| 705 | FATAL: DN HAS EXCEEDED MAXIMUM LEVELS OF 300 |
| 706 | WARNING: THE THEORETICAL RESIDUE HAS BEEN CALCULATED |
| 707 | The adj theo at the listed wl/wc is < the amount of vol to be allocated |
| 708 | The total volume at the listed MP was not allocated to all fun's |
| 709 | Zero production was calc. for the listed wl/wc but its days up > 0 |
| 710 | The system computed Texas Extraction loss of 0 for listed wl/wc. |
| 711 | Texas extraction > 0 was computed at the listed wl/wc. |
| 712 | FATAL: A LOAD OIL RECEIPT VOL HAS BEEN ENTERED WITHOUT THE TRANS INFO |
| 713 | FATAL: NW WL CMPLS DID NOT HAVE ENOUGH THEOR TO COVER UNALLOCATED VOLS |
| 714 | The well/wc is indentified as a supply source, but it is not in the DN |
| 715 | Multiple downstream nodes are connected to the listed node and at least |
| 716 | WARNING: CALC PROD ROW NOT INSERTED. A ROW EXISTS FOR & IN ANOTHER NTWK |
| 717 | WARNING: A WATER CHAIN VOL HAS BEEN CALCULATED BUT NOT ALLOCATED |
| 718 | Unable to alloc calculated water chain volume to upstream well/wc's |
| 719 | Fuel System adj metered qy < allocating vol, so DN is out of balance |
| 720 | Unable to locate MP profile with vli = vol calc from FS |
| 721 | Total disposition at the MP was not allocated to all upstream nodes |
| 722 | A DEFAULT TRANSPORTER WAS NOT FOUND FOR THE LISTED MP |
| 723 | FATAL: ALLOCATIONS UNABLE TO MERGE DUAL ALLOC RESULTS |
| 724 | L3 record from date & - not found for sales vol for eff from date &. |
| 728 | WARNING: CALC PRODUCTION IS GREATER THAN ZERO. THE & IS AN INJECTION & |
| 730 | WARNING: THE THEORETICAL RESIDUE HAS BEEN CALCULATED AS ADJUSTED PROD |
| 732 | FATAL: THE TOTAL DISPOSITION VOL AT THIS MP WAS NOT ALLOCATED TO WELLS |
| 733 | WARNING: THE EXTRACTION LOSS FACTOR RECORD WAS NOT WRITTEN. |
| 734 | WARNING: THE EXTRACTION LOSS FACTOR RECORD WAS NOT WRITTEN. |
| 738 | FATAL: DEPENDENT MATERIAL - MUST BE SPECIFIED WHEN & CO2 OR NITROGEN |
| 739 | WARNING: NGL COMPONENT VOL WAS ENCOUNTERED THAT CAN NOT BE ALLOCATED |
| 740 | FATAL: POTENTIAL FOR DISPOSITION AND THE FORMATION PRODUCTION COLUMN & |
| 745 | WARNING: THE ADJUSTED THEORETICAL QUANTITY IS NEGATIVE |
| 746 | WARNING: A & SPLIT ENCOUNTERED WHEN SUMMING THEO VOLS FOR A DEPENDENCY |
| 749 | FATAL: GAS PLANT ERROR |
| 750 | Invalid DN configuration |
| 751 | Theo. adjustment was not selected for the DN and sums do not match |
| 752 | Unable to compute a theo adjustment ratio, since the system input = 0 |
| 753 | Unable to find theo qty for listed matnr/vt on internal table twctv |
| 754 | Alloc system-output has reached 0 during top lvl mtr at alloc/theo mtr |
| 755 | Alloc system-output is less than 0 when adj top lvl mtr at alloc/theo mtr |
| 756 | FATAL: CALCULATING TOLERANCE FOR GAS PLANT ADJUSTED PRODUCTION |
| 757 | Upstrm config at listed node could potentially cause adjustment problems |
| 758 | Summing system input to calculate ratios for network adjustments |
| 759 | Adjusted theoretical was not calculated for listed well/wc |
| 760 | The listed MP contains all deduct meters immediately upstream |
| 761 | Network tolerance out of user-specified range |
| 762 | A positive amount can not be adjusted to one or more upstream nwk nodes |
| 763 | Non alloc or theo meter on same level as Fuel System final disposition MP |
| 766 | FATAL: GAS PLANT ERROR |
| 767 | FATAL: INVALID LEVEL CONFIGURATION |
| 771 | WARNING: AMT TO BE ADJTD TO AN ALLOC OR THEO METER IS NOT GREATER THAN 0 |
| 772 | FATAL: WHILE CALCULATING TOLERANCE FOR GAS PLANT ADJUSTED PRODUCTION |
| 773 | WARNING: & BASE OVERRIDE WAS USED DURING THE & OF THE GIVEN MATERIAL |
| 774 | FATAL: THE UPSTREAM METER & CAN NOT CONSIST OF ONLY DEDUCT METERS |
| 775 | FATAL: AMT TO BE ADJUSTED TO AN ALLOC OR THEO METER IS LESS THAN ZERO |
| 776 | WARNING: NETWORK TOLERANCE WAS OUT OF RANGE |
| 779 | FATAL: CAN NOT DERIVE A CHEMICAL ANALYSIS AT THE THEORETICAL METER |
| 781 | FATAL: AMOUNT TO BE ADJUSTED TO AN ALLOC OR THEORETICAL METER IS NEGATIV |
| 787 | FATAL: INVALID DN REFERENCE NO |
| 788 | Unable to set traverse starting position: & |
| 789 | FATAL: FURTHEST UPSTREAM NODES NOT FOUND |
| 790 | FATAL: FURTHEST DOWNSTREAM NODES NOT FOUND |
| 791 | FATAL: RECORD NOT FOUND FOR PRODUCT CORRESPONDING TO MATERIAL |
| 792 | FATAL: NO RECORDS EXIST IN & |
| 793 | INSERTING/UPDATING & FAILED |
| 800 | FATAL: VOLUME CATEGORY NOT FOUND FOR VT |
| 801 | Unable to determine UOM Grp. for DN Meas.Grp. &1 and product &2 |
| 802 | Unable to determine Conversion Group &1 for product &2 |
| 803 | FATAL: UNABLE TO CONVERT DATE: & AND TIME: & TO TIMESTAMP FORMAT |
| 804 | Unable to convert date to timestamp: & |
| 805 | More than 1 well exists the DN and a TCM of Single Well has been chosen |
| 806 | Unable to traverse downstream: & |
| 807 | Unable to successfully calculate WC Theo. at listed wl/wc using TCM & |
| 808 | Unable to traverse upstream from MP & |
| 809 | UoM for dimension &1 &2 &3 not found for UoM Group &4. |
| 810 | Calc Prod: Entry in table T_TWCTV not found. |
| 811 | System number for table & not created |
| 812 | Call PPN Main failed: & & & & |
| 813 | TCM Ratio Code & not in internal allocation rule table W_TRMPVT_TB |
| 814 | Update Network Status Failed |
| 815 | Unable to get downtime for well & well completion & |
| 816 | Unable to convert to timestamp for date & time & |
| 817 | Unable to convert to date and time for timestamp & |
| 818 | Volume Type & not found in table OIU_PR_VLTCX |
| 819 | FATAL: DOWNSTREAM OF WC & & IS A WELL & &. |
| 820 | Network Measurement Point internal table is empty |
| 821 | Network is a fuel system and has furthest upstream node wc's |
| 822 | Network Well Completion internal table is empty |
| 823 | Network Well Completion Profile internal table is empty |
| 824 | Network Measurement Point Profile internal table is empty |
| 825 | Unable to Calculate Heat Value |
| 826 | Invalid MP Fuels Spec. - Type Code & with Major Product Code & |
| 827 | MP type & does not exist in the DN and the DNAP has water chain |
| 828 | A negative quantity has been computed for water chain |
| 829 | MP & does not exist in internal table W_NTWKMP_TB |
| 830 | Error during insert in table OIU_PR_TWCDVH |
| 831 | Upstream of PM Meter table limit has been exceeded |
| 832 | Database I/O Error on & for table & |
| 833 | More than one MP flagged as MST default |
| 834 | Well Completion & & does not exist in internal table W_NTWKWC_TB |
| 835 | Division by zero is not possible |
| 836 | Error when calculating heating value: & |
| 837 | Unable to get the downstream nodes of a split node. |
| 838 | Material for MAJPD & and PD & not found in table OIU_CM_MAT_PRCD |
| 839 | Return code &1 after calling function &2 |
| 840 | Reclassified material for material & not found in table OIU_CM_RCLS |
| 841 | Return code & after calling function OIU_VA_HANDLE_LOAD_OIL_INV |
| 842 | Entry for system-no &/& in table W_TWCDVH_TB not found |
| 843 | Return code & after calling function OIU_VA_REVERSE_LOADOIL_TMPVL |
| 844 | Unable to get all nodes immediately upstream of & |
| 845 | Error when calculating volume to energy: & |
| 846 | Error when calculating energy to volume: & |
| 847 | Node type & is not valid |
| 848 | Volume and Energy keys are out of sequence for dual alloc |
| 849 | Error when updating table oiu_pr_twcdvh |
| 850 | Unable to convert Unit of Measure: & |
| 851 | Network structure error (check MP & |
| 852 | The checked networks can not be allocated |
| 853 | Error when deleting table oiu_pr_twcdvh |
| 854 | Error when updating table & |
| 855 | Warning messege issued during TCM calc. of listed wl/wc for TCM & |
| 856 | Unable to allocate & of material & / VT & to all supporting FUN's |
| 857 | Can not CLOSE: checked networks are being processed by another sub-system |
| 858 | At least one well exists upstream of multiple Measurement Pts in network. |
| 859 | Meter not found (check MP &) |
| 860 | Error during calculate Plant Inlet Volumes (check MP &) |
| 861 | No Measurement Point specified |
| 862 | Node in NWK &, MPNO & is not a Measurement Point |
| 863 | Volumes from points downstream of plant inlet totaled zero |
| 864 | MP & / Component & not found in table W_MPCOMP_TB |
| 865 | WC & & / Component & not found in table W_WCCOMP_TB |
| 866 | Total Volume initial: WL: &, WC: &, Component: & |
| 867 | Component & not defined in table OIB07, customize QCI parameter |
| 868 | Error during calulating physical properties, conv. group & component & |
| 869 | Reallocate Well Completion failed |
| 870 | Default Heating Value & taken from record more than 12 months old |
| 871 | A well test is not found from & to &. |
| 872 | & Volumes already exist for the date range covered by this &. |
| 873 | & is currently tied to an effective contract. |
| 874 | A well test was not found for WL/WC & & in the last 24 months. |
| 875 | Could not open file |
| 876 | Error during archiving |
| 877 | Load oil sending and receiving Measurement point cannot be the same. |
| 878 | For WL/WC & & L3 (Load Oil Inv.) > 04 (Closing Inv.) by & |
| 879 | FATAL: BCD Overflow: & |
| 880 | Well Completion & & is present in more than one DN |
| 881 | Allocation for DN & ended &. |
| 883 | User is not authorized to create/change Contract Allocation data |
| 884 | User is not authorized to create/change Volume Allocation data |
| 885 | User is not authorized to create/change Valuation data |
| 886 | MP Allocation Profile not found for MP &1 |
| 887 | MPAP data error. |
| 888 | There cannot be any production when all WCs are shut-in |
| 889 | Well & does not exist |
| 890 | Well/Well Completion &/& does not exist |
| 891 | Delivery Network & does not exist |
| 892 | Error in GUI flush |
| 893 | Please select a row |