PK - Production - KANBAN
The following messages are stored in message class PK: Production - KANBAN.
It is part of development package MD05 in software component PP-KAB. This development package consists of objects that can be grouped under "Kanban".
It is part of development package MD05 in software component PP-KAB. This development package consists of objects that can be grouped under "Kanban".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Internal Error |
| 001 | Please maintain Table &1. Entry &2 &3 does not exist. |
| 002 | Material &1 does not exist in plant &2 |
| 003 | Supply area &1 does not exist |
| 004 | Plant &1 does not exist |
| 005 | You must select a number less than the total number of kanban containers |
| 006 | Responsible person &1 does not exist; check your entry |
| 007 | Replenishment strategy &1 in plant &2 does not exist |
| 008 | Control cycle &1 &2 &3 does not exist |
| 009 | Control cycle &1 &2 &3 already exists |
| 010 | Control cycle &1 &2 &3 will be created |
| 011 | Object &1 does not exist |
| 012 | Number range &1 for object &2 does not exist |
| 013 | Number range &1 will soon be exceeded |
| 014 | Number range &1 has been exceeded |
| 015 | Not all kanban containers have status WAIT |
| 016 | Control cycle &1 &2 &3 will be deleted |
| 017 | No changes were made |
| 018 | Reference does not exist |
| 019 | Please define reference completely |
| 020 | Control cycle &1 &2 &3 will be changed |
| 021 | Please specify source data |
| 022 | No.of kanban containers not equal to cntrl cycle data; data is changed |
| 023 | A control cycle must contain at least 2 kanban containers |
| 024 | Kanban container &1 &2 does not exist. Please check entry |
| 025 | Status &1 may not be changed to status &2 |
| 026 | Not currently possible to switch strategy |
| 027 | Kanban container status will be changed |
| 028 | No kanban containers exist |
| 029 | Kanban quantities &1 are not equal to the goods receipt quantity &2 |
| 030 | Only one entry allowed for supply area, resp. person, or stge location |
| 031 | Responsible person &1 is not responsible for any control cycle |
| 032 | Production version &1 does not exist for material &2 in plant &3 |
| 033 | Storage bin &1 / &2 / &3 does not exist |
| 034 | Storage location &1 in plant &2 does not exist |
| 035 | Enter the purchasing organization and vendor |
| 036 | Quantity was posted |
| 037 | Contract number and item must be maintained together |
| 038 | Control cycle data is blocked by user &1 |
| 039 | Kanban container data is blocked by user &1 |
| 040 | Material &1 has not been created for storage location &2 |
| 041 | Position the cursor on a control cycle or a kanban |
| 042 | No supply area assigned to storage location &1 |
| 043 | Data cannot be blocked (system error) |
| 044 | Data blocked by another user |
| 045 | Control cycle has already been created by another user |
| 046 | Control cycle &1 was not calculated. Selection criteria produced 0 reqmts |
| 047 | Position cursor on a kanban |
| 048 | Position the cursor on a control cycle |
| 049 | Control cycle data must be saved first |
| 050 | Kanban container &1 does not exist |
| 051 | Kanban container &1 is blocked |
| 052 | Kanban container &1 is error free |
| 053 | Flag the kanban containers for deletion or increase the no. of containers |
| 054 | No storage location exists in plant &1 in the specified area |
| 055 | No responsible person exists in plant &1 in the specified area |
| 056 | No supply area exists in plant &1 in the specified area |
| 057 | No in-house production strategy exists in plant &1 in the specified area |
| 058 | No external replenishment strategy exists in plant &1 in specified area |
| 059 | No stock transfer strategy exists in plant &1 in the specified area |
| 060 | In-house production strategy &1 does not exist in plant &2 |
| 061 | External replenishment strategy &1 does not exists in plant &2 |
| 062 | Stock transfer strategy &1 does not exist in plant &2 |
| 063 | Position the cursor on a valid row |
| 064 | Please maintain entry &1 in table T457T |
| 065 | The selected error messages will be deleted |
| 066 | Purchasing organization &1 does not exist |
| 067 | Supplier &1 or info record does not exist or is not correct |
| 068 | No valid replenishment source could be determined via the source list |
| 069 | Please enter control cycle no. or material, plant, and supply area |
| 070 | Kanban container cannot be set to FULL from status &1 |
| 071 | No scheduling agreement could be found |
| 072 | Post Kanban signal by saving |
| 073 | Kanban container has the status ERROR. Signal not possible. |
| 074 | Kanban container is locked - replenishment will not be triggered |
| 075 | Dynamic storage bin: no entry for the storage bin |
| 076 | Storage type &1 / &2 does not exist |
| 077 | You will lose your changes, if you do not save the selected containers |
| 078 | You must specify the version for this process |
| 079 | You must specify a scheduling agreement for this process |
| 080 | Trigger quantity is greater than quantity per kanban container |
| 081 | No address has been maintained |
| 082 | Function code handling &1 is not coded for screen |
| 083 | Control cycle from WM/PP may not be processed here |
| 084 | Kanban control cycle may not be processed here |
| 085 | No authorization for creating control cycles in plant &1 |
| 086 | No authorization for changing control cycles in plant &1 |
| 087 | No authorization for displaying kanban container data in plant &1 |
| 088 | No authorization for correcting kanban containers in plant &1 |
| 089 | No authorization to trigger kanban signal in plant &1 |
| 090 | Only control cycles for the WM-PP interface may be processed |
| 091 | Please enter a storage bin or set the indicator "Dynamic storage bin" |
| 092 | Dynamic bin coordinates are not supported for crate parts |
| 093 | Dynamic bin coordinates are not supported for release parts |
| 094 | Stge loc. of supply area not WM-managed. Only use mat. staging ind. "0". |
| 095 | Only use indicators "0", "1", "2", and "3" for WM staging |
| 096 | Distribution key &1 does not exist |
| 097 | Reference control cycle is not a WM control cycle for replenishment |
| 098 | Initial material staging indicator is not allowed |
| 099 | Dynamic storage bins require you to enter a storage type |
| 100 | Mat. staging indicator "0" allows no storage type or dynamic storage bin |
| 101 | Container parts require at least 2 kanban containers |
| 102 | Enter a kanban quantity |
| 103 | Warehouse number changed from &1 to &2 according to IM-WM interface |
| 104 | Supply area &1 is assigned to warehouse number &3 in plant &2 |
| 105 | Do not define cross-material control cycles for crate parts |
| 106 | Do not define cross-material control cycles for release order parts |
| 107 | UoM &1 not allowed according to material master record |
| 108 | Unit of measure changed without kanban quantity change |
| 109 | Dynamic warehouse numbers not supported for manual staging |
| 110 | Cross-material control cycles are not supported for manual staging |
| 111 | No suitable control cycle found |
| 112 | Enter a valid kanban status |
| 113 | Not possible to maintain issuing plant |
| 114 | Not possible to maintain purchasing organization |
| 115 | Not possible to maintain supplier |
| 116 | Contract number and contract item cannot be maintained |
| 117 | No source PSA possible for stock transfers from WM with tfr requirements |
| 118 | No logic to set containers to empty in case of event-driven cntrl cycle |
| 119 | Cost center cannot be maintained |
| 120 | Trigger quantity cannot be maintained for event-driven control cycle |
| 121 | Maintenance of SD scheduling agreement not possible |
| 122 | Enter a JIT call profile |
| 123 | JIT call profile cannot be maintained |
| 124 | Rounding qty cannot be maintained for ctrl cycle with packing instruction |
| 125 | Fixed kanban quantity not possible for control cycle w. packaging instr. |
| 126 | No indicator for kanban calculation for event-driven control cycle |
| 127 | Calculation profile cannot be set |
| 128 | No safety factor possible for event-driven control cycle |
| 129 | Replenishment lead time in days is not possible |
| 130 | No sub-day replenishment lead time possible |
| 131 | Not possible to maintain constants for kanban calculation |
| 132 | Block for kanban control cycle not yet set externally |
| 133 | Choose just one replenishment strategy |
| 134 | Enter a stock transfer storage location |
| 135 | Maintenance of stock transfer location not possible |
| 136 | Not possible to maintain person responsible |
| 137 | Not possible to maintain production version |
| 138 | Not poss. to set no. of containers in case of event-driven cntrl cycle |
| 139 | Enter a purchasing organization |
| 140 | Assignment of indep. source not poss. in case of event-driven cntrl cycle |
| 141 | No fixed lot size in mat. master record or differs from kanban quantity |
| 142 | Kanban container must not be deleted |
| 143 | Not possible to cancel (Inbound delivery & must be cancelled first) |
| 144 | Production order &1 cannot be released |
| 145 | Control cycle &1 &2 &3 can be deleted |
| 146 | Control cycle &1 &2 &3 has been deleted |
| 147 | Enter packing instructions |
| 148 | Production Supply Area data is blocked by user &1 |
| 149 | Source storage location is not supported for this staging indicator |
| 150 | No authorization for deleting error messages in plant &1 |
| 151 | No authorization for triggering kanban signal in plant &1 |
| 152 | &1 kanban container(s) processed |
| 153 | Kanban container cannot be set to WAIT from status &1 |
| 154 | Storage location &1 is not equal to supply area storage location &2 |
| 155 | Kanban container cannot be set to EMPTY from status &1 |
| 156 | Replenishment strategy &1 no longer exists |
| 157 | Status can only be changed after the &1 &2 |
| 158 | Order &1 with item &2 does not exist |
| 159 | Order &1 is not a scheduling agreement |
| 160 | Contract does not refer to storage location for supply area |
| 161 | Scheduling agreement item has no kanban indicator &1 or an incorrect one |
| 162 | Indicator "Indep. source" not allowed for external replenishment |
| 163 | Enter an area specification |
| 164 | You can only make one entry for a supply source |
| 165 | Enter material and plant or control cycle |
| 166 | Further entries are not needed if you enter the control cycle number |
| 167 | No control cycle found for the entries |
| 168 | Coding for navigation function &1 does not exist |
| 169 | Values for user &1 saved |
| 170 | User values could not be saved |
| 171 | Status IN USE cannot be missed out |
| 172 | Status EMPTY cannot be set manually here |
| 173 | Reversed qty per kanban container greater than kanban quantity |
| 174 | Kanban container cannot be set to IN PROCESS from status &1 |
| 175 | No error messages were found |
| 176 | No kanban container found to suit the entries |
| 177 | You must also make quantity changes in the Inventory Management menu |
| 178 | Kanban container &1 has been processed by another user |
| 179 | Agreement &1 item &2 does not apply to material &3 |
| 180 | Agreement &1 is not a contract |
| 181 | Purchasing info system does not suit the outline agreement |
| 182 | Supplier does not suit the outline agreement |
| 183 | Printer &1 not found |
| 184 | At the moment, no valid source can be found in the source list |
| 185 | In the source list, sched. agrmt item &1 &2 has an incorr. stge location |
| 186 | In the source list, sched. agrmt item &1 &2 has no kanban indicator |
| 187 | GR for the full kanban container has not yet been made |
| 188 | Control cycle number does not match material, plant, supply area |
| 189 | Select strategy for storage location that is not included in MRP |
| 190 | Select strategy for Kanban control with MRP |
| 191 | No suitable replenishment strategy |
| 192 | Strategy not allowed for stge location that is included in planning |
| 193 | Strategy not allowed for stge location that is not included in planning |
| 194 | Source storage location must differ from supply area's storage location |
| 195 | Issuing plant must differ from the receiving plant |
| 196 | Delivery schedule cannot have Kanban indicator in this procedure |
| 197 | Kanban container cannot be set to IN TRANSIT from status &1 |
| 198 | Goods movement in kanban container &1 for supply area &2 |
| 199 | Status sequence &1 does not exist |
| 200 | No status sequence exists |
| 201 | The status sequence &1 defined in the control cycle no longer exists |
| 202 | The mandatory status &1 from status sequence &2 cannot be ignored |
| 203 | Status &1 is not allowed in status sequence &2 |
| 204 | Supply area &1 has not been assigned a responsible person |
| 205 | No valid input values were found |
| 206 | Repetitive mfg profile &1 invalid or was not found |
| 207 | Materials with RS header and reporting point backflush not allowed |
| 208 | Quantity to be withdrawn is not available in the kanban containers |
| 209 | Enter a withdrawal quantity greater than zero |
| 210 | Vendor &1 does not exist |
| 211 | Kanban container with ID number &1 does not exist |
| 212 | Kanban container must not be unlocked because cntrl cycle is not released |
| 213 | Status "&1" cannot be prohibited for this process |
| 214 | Trigger qty must be smaller than kanban qty and greater than zero |
| 215 | Status entered does not exist |
| 216 | Setting the error status for the kanban container is not allowed here |
| 217 | Independent source requires normal replenishment trigger |
| 218 | Receipt quantity must be greater than trigger quantity &1 |
| 219 | No layout set for printing a kanban card |
| 220 | Error printing the kanban card |
| 221 | Schedule line cannot be changed (GR aleady posted) |
| 222 | No data records were found for the selection criteria |
| 223 | Existing schedule line is still active |
| 224 | Enter the scenario |
| 225 | Calculated cntrl cycles: &1 / cntrl cycles not calculated: &2 (see log) |
| 226 | No kanban containers exist for the control cycle |
| 227 | Control cycle &1 not calculated as RLT of mat. &2 has not been maintained |
| 228 | No kanban container was selected. Print is not possible |
| 229 | Post the kanban with 'Save' |
| 230 | Function only possible for event-driven kanban |
| 231 | Replenishment lead time (hrs:mins) only makes sense with shift program |
| 232 | Not all kanban containers could be created successfully |
| 233 | Enter or maintain a quantity in the control cycle |
| 234 | Quantity per container should be a multiple of the fixed kanban quantity |
| 235 | Rounding quantity must be multiple of the fixed kanban quantity |
| 236 | Quantity per container should be a multiple of the rounding quantity |
| 237 | Select the end of the block |
| 238 | Enter a kanban container ID number |
| 239 | Kanban container cannot be set from status &1 to IN USE |
| 240 | No authorization profile found in specified area |
| 241 | Calculation profile &1 does not exist in plant &2 |
| 242 | 'Date from' must lie before 'Date to' |
| 243 | Scenario &1 not found |
| 244 | Supply area &1 does not belong to stor.loc. &2 but to stor.loc. &3 |
| 245 | Here, you can only maintain plant &1 of the control cycle |
| 246 | No graphic f.control cycle &1 possible. Select. crit. produce no reqmts |
| 247 | Select entries to be deleted |
| 248 | You have no authorization for the Kanban calculation in plant &1 |
| 249 | Error accessing the FM 'pk_read_dependent_requirements' |
| 250 | Enter a person responsible |
| 251 | Enter a supply area |
| 252 | Enter a storage location |
| 253 | Please enter a supplier |
| 254 | Enter an issuing plant |
| 255 | Enter a material |
| 256 | Material &1 does not exist in the kanban board |
| 257 | Supply area &1 does not exist in the kanban board |
| 258 | Storage location &1 does not exist for this selection |
| 259 | Stor. loc. &1 with person respon. &2 does not exist for this selection |
| 260 | Entry supply area &1, stor. loc. &2, person resp. &3 does not exist |
| 261 | Authorization profile &1 not possible for this control cycle |
| 262 | Planning scenario &1 does not exist |
| 263 | No further entries for search criteria &1 |
| 264 | Errors in batch determination caused termination |
| 265 | Error in stock determination caused termination |
| 266 | Maximum number of kanban containers were exceeded in the calculation |
| 267 | Enter the material/plant/supply area and a Kanban number |
| 268 | Not possible to change control cycle to 1 container (mat. &1, PSA &2) |
| 269 | Enter a bar code |
| 270 | Enter a control cycle number and a Kanban container number |
| 271 | Choose "Save" to post status change from &1 to &2 |
| 272 | Control cycle &1 (material &2, supply area &3) has been changed |
| 273 | Enter a control cycle number |
| 274 | Enter values for the material/plant/supply area |
| 275 | Enter a plant |
| 276 | Reversal of WM transfer orders not possible |
| 277 | Storage type &2 does not exist in warehouse number &1 |
| 278 | Warehouse no. changed to &3 to correspond to plant &1 and stor. loc. &2 |
| 279 | The delivery time is in the past |
| 280 | No kanban container can be set to empty for control cycle &1 |
| 281 | Warning: Summarized JIT calls will not be updated |
| 282 | SD scheduling agreement &1 does not exist |
| 283 | The batch entered is incorrect |
| 284 | Enter values for the plant/material |
| 285 | The available quantity from stock determination is too low |
| 286 | Enter an authorization profile |
| 287 | The available quantity from batch determination is too low |
| 288 | The stock transfer reservation &1 for kanban container &2 does not exist |
| 289 | Stocks with special stock ind. &1 not avail. for kanban transfer posting |
| 290 | Select a valid row for the start of the block |
| 291 | Select a valid row for the end of the block |
| 292 | Calculation of the kanban quantity not possible, &1 - &2 >= zero |
| 293 | Last kanban signal cannot be reversed |
| 294 | Make sure to destroy kanban card printout for reversed container |
| 295 | No kanban containers were found |
| 296 | The maximum possible kanban quantity was exceeded in the calculation |
| 297 | The status of kanban container &1 will not be reset |
| 298 | The status of kanban container &1 will be reset |
| 299 | The kanban calculation is not provided for control cycle &1 |
| 300 | Insufficient Customizing 'Adjusting a control cycle...' for plant &1 |
| 301 | Enter a kanban quantity greater than zero |
| 302 | Please enter a numerical value (greater than or equal to zero) |
| 303 | Distribution key specification missing in kanban calculation profile &1 |
| 304 | The replenishment strategy no longer corresponds to the data entered |
| 305 | This replen. strat. does not allow you to assign outline agt to an accnt |
| 306 | Set the bulk material indicator in the material master |
| 307 | The bulk material ind. in the material master does not suit this strategy |
| 308 | The stor. locs of previous supply area &1 and supply area &2 must match |
| 309 | You have changed the supply area in the control cycle |
| 310 | The outline agreement item must be assigned to an account |
| 311 | The outline agt item must be fully assigned to an account at cost center |
| 312 | No suitable kanban container selected for action |
| 313 | StorLoc of source supply area must correspond to stck-transfer stor.loc. |
| 314 | Supply source supply area must differ from target supply area |
| 315 | In this procedure the cost center is taken from the agreement |
| 316 | Cost center &1 does not exist |
| 317 | Changes to status and/or actual quantity are not updated |
| 318 | JIT call profile &1 does not exist |
| 319 | SD scheduling agreement &1 &2 does not exist |
| 320 | Specify a cost center |
| 321 | Several IDocs transferred to processing program simultaneously |
| 322 | Unknown segment &1 found in IDoc |
| 323 | No partners were found using SNDPRN: &1 und LIFNR: &2 |
| 324 | Qualifier &1 is not allowed in the 'Reference data' section |
| 325 | Qualifier &1 is not allowed in the 'date' section |
| 326 | Qualifier &1 is not allowed in the section 'Object identification' |
| 327 | The system could not determine the customer number |
| 328 | Assignment btwn SD sched.agreement item and control cycle is not specific |
| 329 | The system could not determine the time zone of the plant |
| 330 | An undefined error has occurred |
| 331 | The delivery date is not valid |
| 332 | Plant &1 does not exist |
| 333 | Material produced in-house cannot be procured to cost center |
| 334 | Maintain the data for forward scheduling |
| 335 | System will find no message records for a JIT call |
| 336 | Data from status sequence and replmt strategy with SD are inconsistent |
| 337 | Outline agreement item &1 &2 cannot be used |
| 338 | Cancel the Kanban using material document &1 |
| 339 | Not authorized to maintain supply areas |
| 340 | Not authorized to display supply areas |
| 341 | Update of control cycle &1 unsuccessful |
| 342 | Update of kanban container &1 unsuccessful |
| 343 | Status sequence does not apply to the one-card kanban |
| 344 | First post the goods receipt for the kanban container |
| 345 | Kanban container cannot be locked with available data |
| 346 | Select exactly one control cycle |
| 347 | Transferred unit of measure does not match unit of measure in cntrl cycle |
| 348 | Use 2 containers only for the one-card kanban |
| 349 | Select exactly one kanban container |
| 350 | The kanban container has already been entered (see item &1) |
| 351 | No control cycle or kanban container determined for the data specified |
| 352 | Kanban quantity not sufficient, reverse posting not possible |
| 353 | No kanban containers have been selected |
| 354 | Values from user &1 have been deleted |
| 355 | User values could not be deleted |
| 356 | The indicator 'separate GR' cannot be deleted at the moment |
| 357 | The control cycle delivery address from the template has been copied |
| 358 | Outline agreement item is still used in kanban cntrl cycles or containers |
| 359 | Enter an agreement |
| 360 | You have not selected a control cycle; printing not possible |
| 361 | No form has been found for printing a control cycle |
| 362 | Error printing the control cycle |
| 363 | &1 control cycle(s) printed successfully |
| 364 | Here only packing instructions with a single material can be used |
| 365 | A stock adjustment cannot be made for this control cycle |
| 366 | Storage location must be the same for all kanban containers |
| 367 | &1 control cycles have been processed |
| 368 | Storage location &2 assigned to supply area &1 is not WM-managed |
| 369 | Distribute the physically withdrawn qty correctly amongst the quants |
| 370 | Storage bin already used for supply area &2 in plant &1 |
| 371 | Supply area &1 is still used in control cycles; deletion not possible |
| 372 | The materials from control cycle and packing instructions do not match |
| 373 | Default value(s) taken from Kanban Customizing |
| 374 | Supply area used in control cycles; storage location change not possible |
| 375 | Supply area stor.loc.does not match corresponding entry in WM Customizing |
| 376 | No inventory document found for the selection criteria |
| 377 | The counted stock has been posted successfully |
| 378 | Status cannot be set in this view of the kanban board |
| 379 | No time stream could be created |
| 380 | For technical reasons, only the status of a container can be changed |
| 381 | This replenishment strategy cannot be used within WM |
| 382 | Control cycle &1 is not intended for manual sched.agrmt release creation |
| 383 | Control cycle &1 does not have lifecycle status 'Released' |
| 384 | Supply area storage loc. not in same MRP area as sched. agrmnt stor. loc. |
| 385 | Maintain call control in call profile &1 |
| 386 | The control cycle printing form does not exist |
| 387 | Enter a call quantity larger than zero |
| 388 | Call type in JIT call profile is not suitable for control cycle type |
| 389 | Call profile does not have a call control |
| 390 | No open scheduling agreement schedule line found for reversal posting |
| 391 | Maintain a standard purchasing organization |
| 392 | The source storage location must not be WM-managed in this process |
| 393 | No proposals can be generated for the control cycle |
| 394 | Material &1 has not been created for stock transfer location &2 |
| 395 | Enter the plant or control cycle number |
| 396 | Creation of several containers for direct transfer posting not possible |
| 397 | Scheduling agreement plant does not correspond to control cycle plant |
| 398 | Default values for warehouse number &1 are not defined |
| 399 | Storage location &1 in plant &2 is not managed by WM |
| 400 | Indicator "Consumption at Cost Center" remains without effect |
| 401 | Goods issue to cost center &1 could not be posted |
| 402 | Invalid warehouse number &1 |
| 403 | Hazardous material master &1 does not exist in region &2 |
| 404 | Quant &2 does not exist in warehouse number &1 |
| 405 | Inconsistent entry for quant &1 |
| 406 | Material for quant &1 is special stock and is ignored |
| 407 | Movement type &2 does not exist in warehouse number &1 |
| 408 | Error updating a transfer order item |
| 409 | Storage location could not be determined uniquely |
| 410 | Warehouse number &1 or storage location &2 incorrect |
| 411 | Assignment plant/storage location missing for warehouse number |
| 412 | No entry for plant/warehouse number (&1 / &2) |
| 413 | Standard stor.loc. cannot be determined for plant &1 and w/hse no. &2 |
| 414 | Warehouse number data not defined plant/warehouse number (&1 / &2) |
| 415 | Warehouse number description not defined plant/warehouse no. (&1 / &2) |
| 416 | No correction data transferred |
| 417 | Error in material master for material number &3 |
| 418 | Error creating a transfer order item |
| 419 | Error posting a transfer order |
| 420 | Stock correction was carried out, transfer order number: &1 |
| 421 | Stock correction was carried out, no transfer order number confirmed |
| 422 | Error in initialization module 'L_SAPLL03A_INIT_INT' |
| 423 | Data entered does not trigger any stock correction |
| 424 | Error reading storage type control (whse no. &1, storage type &2) |
| 425 | Error separating storage bin &1 in bin/item |
| 426 | Bin changed when splitting storage bin &1 into bin/item |
| 427 | Whse managed in stor.units, but stor.unit no. not transf. (stor.type &1) |
| 428 | Check location or internal number range &2 for external stor. unit no. &1 |
| 429 | Error reading storage location data (plant &1, storage location &2) |
| 430 | Error checking storage unit number &1 (stor.unit type &2) |
| 431 | Error checking storage unit type &1 (stor.unit number &2) |
| 432 | Error checking batch &1 |
| 433 | Correction for HU-managed storage location &2 not allowed (plant &1) |
| 434 | Correction f. stor.type &3(managed in stor.units)not allowed (stor.no &2) |
| 435 | Bin item &1 / &2 already occupied |
| 436 | Error reading stor.type control bulk storage (stor.no. &1, stor.type &2) |
| 437 | Runtime error determining the number of stor. units of a stor.bin |
| 438 | Putaway strategy "B" not supported (stor.type &3 stor. no. &2) |
| 439 | Putaway strategy &1 not supported (stor.type &3 stor.no. &2) |
| 440 | Runtime error determining the deviation between actual qty and target qty |
| 441 | Runtime error determining the correction quantity |
| 442 | Entry data inconsistent: &1 |
| 443 | Runtime error determining physical stock or totals row values |
| 444 | Distribution of material withdrawals is not consistent |
| 445 | Error determining warning limit for variances |
| 446 | Variance from physical stock is &1 % |
| 447 | Variance less than tolerance limit |
| 448 | Count data for batch &1 and stock category &2 created twice |
| 449 | No physical withdrawals allowed if logical stock is zero |
| 450 | No storage loc. supplier could be determined for message determination |
| 451 | Control cycle supplies more than 2 stations |
| 452 | Enter quantities counted or select the zero indicator |
| 453 | Choose create icon to create the control cycle |
| 454 | Physical withdrawal only allowed for unrestricted-use material |
| 455 | Maintain all required characteristics |
| 456 | No plant supplier exists for plant &1 |
| 457 | No control cycle relevant for stock correction was found |
| 458 | Distribute correction quantity to quants |
| 459 | Dependent requirement on &1 for material &2 does not lie on workday |
| 460 | Creation of several planned orders with one action is not possible |
| 461 | Synchronous confirmation of production order without bin is not possible |
| 462 | Select "Save" to post the summarized JIT call |
| 463 | Authorization type &1 not possible with "one-card kanban" |
| 464 | Replenishment strategy does not support WM-managed storage locations |
| 465 | PSA &1 is used in material &2 -> Deletion not possible |
| 466 | PSA &1 used in production version &2 &3 &4 -> Deletion not possible |
| 467 | PSA &1 used in a BOM -> Deletion not possible |
| 468 | PSA &1 used in work center &2 -> Deletion not possible |
| 469 | Use user exit MPKP0001 instead of the user exit MPKB0002 |
| 470 | No display of receipt element possible with control cycle category &1 |
| 471 | Control cycle &1 does not exist |
| 472 | Error reading data for control cycle &1 |
| 473 | Error reading receipt elements (&1) |
| 474 | Error reading WM data for stock transfer stor.loc &1 (Tab. T320) |
| 475 | Error reading control type in plant &1 for strategy &2 |
| 476 | Invalid control type for replenishment strategy &2 in plant &1 |
| 477 | No receipt element was determined |
| 478 | Select value 1 for the "Trigger Replenishment" field |
| 479 | This program cannot be executed in the background |
| 480 | Instruct system to reread the stock data |
| 481 | You cannot create a delivery in this process |
| 482 | Could not find a valid record for the quota arrangement |
| 483 | Enter a value for the plant |
| 484 | Enter a user name |
| 485 | Control cycle category will be changed the next time you save |
| 486 | Storage type &1 in warehouse number &2 does not allow mixed storage |
| 487 | Several control cycles refer to the stock in storage location &1 |
| 488 | Kanban container cannot be cancelled |
| 489 | No valuations can be created for automatic summarized JIT calls |
| 490 | Replenishment cannot be triggered for this kanban container |
| 491 | The kanban quantity is not changed when a packing instruction is used |
| 492 | The PP control cycle cannot be changed in this transaction |
| 493 | Packaging instruction &1 not valid in control cycle &2 |
| 494 | The trigger point must be maintained |
| 495 | Status change for kanban container &1 terminated |
| 496 | Enter a new trigger point |
| 497 | Trigger group &1 uses a different planning work center &2 |
| 498 | Trigger points of control cycles of same trigger group will be adjusted |
| 499 | Trigger point larger than no. of containers in trigger group/cntrl cycle |
| 500 | Trigger point of control cycle &1, &2, &3 can only be changed to &4 |
| 501 | Posting error (table &1, sy-subrc &2, sy-dbcnt &3, plnd-display &4) |
| 502 | Enter a valid control cycle category |
| 503 | Enter a valid replenishment strategy |
| 504 | Maximum number of empty kanban containers exceeded in control cycle &1 |
| 505 | Replenishment element deleted |
| 506 | Requirement was due on &1 at &2 |
| 507 | Reporting point confirmation with kanban not activated |
| 508 | Work center &1 does not exist |
| 509 | No work centers found in plant &1 for selection option |
| 510 | Reporting point information missing |
| 511 | Reporting point confirmation not allowed for this replenishment strategy |
| 512 | Control cycle category "L" not allowed for WM PP (WMS) control cycle |
| 513 | No selection for kanban status 'FULL' or 'IN USE' |
| 514 | Data locked; switch to display mode |
| 515 | &1 cannot be invoked |
| 516 | Status change not possible; check consistency for details |
| 517 | Material staging indicator '0' is not permitted for EWM control cycle |
| 518 | Function only allowed for classic or signal-driven control cycles |
| 519 | No change document items found for control cycle &1 |
| 520 | Enter a number of kanban containers |
| 521 | Status change not allowed |
| 522 | Status change for control cycle &1 not allowed; not all containers locked |
| 523 | Release date lies in the past |
| 524 | Lock date lies in the past |
| 525 | Deactivation not possible; Not all control cycles released |
| 526 | Control cycle has status 'LOCKED' |
| 527 | At least one lifecycle status must be selected |
| 528 | Lifecycle status changed from &1 to &2 |
| 529 | Lifecycle control cycle in kanban not activated |
| 530 | At least one control cycle category must be selected |
| 531 | Whse no. is managed by EWM; storage bin/bin type or dyn. bin not allowed |
| 532 | Storage location &1 is not EWM-managed |
| 533 | Storage location &1 is EWM-managed |
| 534 | Storage location &1 is WM-managed (Integration with WM not possible) |
| 535 | Storage location &1 is not EWM-managed |
| 536 | Staging rel. order part EWM -> IM: Only one cntrl cycle allowed per SLoc |
| 537 | No authorization to set kanban status &1 |
| 538 | Not possible to carry out goods movement |
| 539 | Select one row only |
| 540 | Make entries in all mandatory fields |
| 541 | The value &1 is invalid |
| 542 | Error determining duration of working time |
| 543 | No available capacities maintained at &1 |
| 544 | Error generating timestream |
| 545 | Control cycle &1 for material &2, plant &3, and PSA &4 inconsistent |
| 546 | Replen. lead time [h:min] requires factory calendar and shift sequence |
| 547 | Pull interval [h:m] requires factory calendar and shift sequence |
| 548 | Pull interval [h:m] requires factory calendar and shift sequence |
| 549 | Control cycle must not be created in status 'LOCKED' |
| 550 | Control cycle cannot be changed in this transaction |
| 551 | Control cycle cannot be displayed in this transaction |
| 552 | You cannot select by lifecycle status |
| 553 | Lifecycle status cannot be used; Customizing not active |
| 554 | Release date cannot be used; Customizing not active |
| 555 | Locking date cannot be used; Customizing not active |
| 556 | Only lifecycle status 'Ready for Release' or 'Released' allowed |
| 557 | Release date set automatically in case of status 'Released' |
| 558 | Locking date set automatically in case of status 'Locked' |
| 559 | Lock date lies before release date |
| 560 | Lock date lies before creation date |
| 561 | Release date lies before creation date |
| 562 | Consistency check reveals no error |
| 563 | Only one parameter of kanban ID/bar code/control cycle+kanban no./CC no. |
| 564 | Release date has been reached |
| 565 | Lock date has been reached |
| 566 | Shift sequence necessary in case of sub-day replenishment lead time |
| 567 | You must not change the release date |
| 568 | Control cycle released prior to planned release date |
| 569 | Authorization check for kanban status change not possible |
| 570 | Define a planning work center |
| 571 | No routing found for material &1, plant &2 |
| 572 | No operation for planning work center &1 found in routing |
| 573 | Value &1 in field '&2' is not allowed |
| 574 | No control cycle with planning work center selected |
| 575 | Planning work center &1 is not part of line hierarchy &2 |
| 576 | No production line maintained in production version &1 |
| 577 | No production version found for material &1 in plant &2 |
| 578 | Canceled quantity for each container is smaller than the kanban quantity |
| 579 | No form has been found for printing a kanban card |
| 580 | Entry &1 does not exist in table &2 |
| 581 | The control cycle delivery address from the template is invalid |
| 582 | Make sure to destroy printout for &1 &2 &3 if exists |
| 583 | Reversal failed |
| 584 | Waiting containers of trigger point have been changed by another user |
| 585 | Different trigger points in trigger group &1 |
| 586 | &1 control cycles adjusted, &2 control cycles are locked |
| 587 | No change proposals entered, no control cycles adjusted |
| 588 | Do not enter a source storage location |
| 589 | Control cycle for material &1 plant &2 PSA &3 is locked by user &4 |
| 590 | Maintenance not possible; business function LOG_PP_LMAN_02 not activated |
| 591 | Enter either planning calendar or factory calendar |
| 592 | 'Consider Nonworking Days' indicator has no effect in sub-day scheduling |
| 593 | Repl. strategy 'Delivery from an EWM-Controlled Storage Loc.' not allowed |
| 594 | Control cycle(s) already exist |
| 595 | Quantity to be withdrawn is not available in kanban container &1 |
| 596 | Repl. strategy 'Stock Transfer with Warehouse Task' not allowed |
| 597 | OData call: Error because of invalid eTag |
| 598 | OData call: Other technical error (lock, UoM, ...) |
| 599 | Please enter required information for chosen replenishment strategy |
| 600 | ************* Messages for Control Cycles in the iPPE ****************** |
| 601 | Current date &1 is used to determine the control cycle proposals |
| 602 | |
| 603 | Control cycle &1 cannot be deleted, minimum retention time not reached |
| 604 | ILM notifications are active. Use data destruction for deletion. |
| 610 | Material staging indicator &1 can only be used within an EWM warehouse |
| 611 | Source and target warehouse number &1 must be the same |
| 612 | Warehouse no. for plant &1 and storage locat. &2 could not be determined |
| 613 | Source and target storage location must be the same |
| 614 | Material staging indicator &1 cannot be used for control cycle |
| 615 | Production supply area &1 is assigned to WM managed warehouse &2 |
| 616 | Storage location &1 is assigned to WM managed warehouse &2 |
| 617 | Replenishment location &1 is WM-managed and supply area is initial |
| 618 | Source storage location must use embedded WM |
| 619 | Source and target storage location must belong to same warehouse |
| 620 | Enter warehouse process type |
| 621 | Enter destination storage bin |
| 622 | For EWM Staging, use bin assignment by entitled and product instead. |
| 623 | This transaction cannot be used for embedded EWM integration |
| 624 | Make sure to destroy printouts for kanban card and &1 &2 &3 if exists |
| 625 | Warehouse must not change unit of measure from &1 to &2 |
| 626 | Warehouse must define batch &3, if material &1 &2 defines no batches |
| 627 | Destination storage bin is not valid |
| 628 | Warehouse process type is not valid |
| 629 | Control cycle &1 is inconsistent |
| 630 | Requested quantity of kanban container must be greater than zero |
| 631 | If control cycle shall be deleted, updatable fields must not be filled |
| 632 | Bin &1 does not exist in warehouse &2 |
| 633 | Control Cycles without destination bin exist for this repl. strategy |
| 634 | Post procurement to cost center is not supported for this control type |
| 635 | No control cycle found for material &1, plant &2, PSA &3 |
| 636 | No warehouse number for control cycle with material &1, plant &2, PSA &3 |
| 637 | No EWM warehouse for plant &1 and warehouse number &2 |
| 638 | Bin cannot be determined: Plant and production supply area are missing |
| 639 | Bin cannot be determined: Plant is missing |
| 640 | Bin cannot be determined: Production supply area is missing |
| 641 | Bin cannot be determined: External Procurement Repl. Strategy missing |
| 642 | Bin cannot be determined because Kanban container cannot be identified |
| 643 | Source bin cannot be determined for source production supply area &1 |
| 644 | No EWM warehouse: Do not enter a destination bin |
| 650 | **** COMMENT: Production Order related |
| 651 | An issue occured when creating production order for kanban container |
| 652 | Dialog was cancelled when creating production order for kanban container |
| 653 | You have no authorization to create production order for kanban container |
| 654 | Locking issue when creating production order for kanban container |
| 655 | Update was rejected by production order |
| 656 | Production order update violated budget check |
| 660 | Status is set to &1 due to trigger point or independent source |
| 661 | Container status is set to &1 due to one-card trigger logic |
| 662 | No control cycles found for supply area &1 in plant &2 |
| 663 | No control cycles found for material &1 in plant &2 |
| 664 | No control cycles found for person responsible &1 in plant &2 |
| 665 | Person responsible &1 does not exist in plant &2 |
| 666 | Report PK_DELETE_VENDOR_CUSTOMER is deprecated - see note 2935734 |
| 667 | Cross-Plant setting is not allowed for this replenishment strategy |
| 668 | Replenishment strategies starting with 'PD' cannot be created or changed |
| 669 | Namespace 'Y*' is not allowed for new replenishment strategies |
| 670 | 'Procurement to Cost Center' is not supported for this control type |
| 671 | Usage of replenishment strategies starting with 'PD' is not advised |
| 700 | **** COMMENT: Mass-Processing Control Cycle Maintenance |
| 701 | Save control cycles: &1 CC newly created, &2 changed, &3 deleted |
| 702 | &1 of &2 selected control cycles flagged for deletion |
| 703 | &1 of &2 selected control cycles printed |
| 704 | &1 control cycles selected |
| 705 | Control cycle not completely specified (Complete your data) |
| 706 | Action not possible for this control cycle |
| 707 | Change in status of control cycle &1 to status &2 not allowed |
| 708 | Category of &1 of &2 selected control cycles changed |
| 709 | Number of kanban containers to be created must be at least one |
| 710 | &1 of &2 control cycles checked manifest serious inconsistencies |
| 711 | &1 of control cycles with status 'In Prep.' checked still inconsistent |
| 712 | &1 of changed control cycles checked can be saved |
| 713 | Consistency check of &1 control cycles resulted in no errors |
| 714 | &1 of &2 changed control cycles checked manifest inconsistencies |
| 715 | Change to &1 cannot be carried out; data reset to &2 |
| 716 | Trigger manual consistency check for control cycle &1 before changing |
| 717 | No error has occurred in consistency checks to date |
| 718 | Production supply area &1 does not exist in plant &2 |
| 719 | Enter a valid lifecycle status |
| 720 | CC with consistency errors cannot be used as template for copying |
| 721 | Enter a valid value for the selected field |
| 722 | No SD scheduling agreement maintained for this control cycle |
| 723 | You can only adopt entries by using the "Add New Entries" function |
| 724 | Material or plant of SD scheduling agreement unsuitable for control cycle |
| 725 | Print control value "print at goods receipt" is not allowed |
| 726 | |
| 727 | |
| 801 | Container &1 has been deleted. |
| 802 | Specify at least one value for Minimum Age or Minimum Number |
| 803 | Simulation mode is activated. No real changes will be done. |
| 804 | No authorization to delete kanban container in plant &1 |
| 805 | No kanban containers were found for the given selection criteria |
| 806 | No kanban containers can be deleted with the given control parameters |
| 812 | GR posting for SumJC &1 &2 must be done with reference to a confirmation |
| 818 | The goods receipt must be carried out in a different transaction |
| 850 | *****COMMENT: Messages for XPRAs |
| 851 | Application: Kanban Error in table conversion |
| 852 | DDIC information for table PKPS could not be read |
| 853 | Table PKPS is inconsistent |
| 854 | Check tables PKTMP and PKPS |
| 855 | Table PKPS was modified by customer |
| 856 | Posting DDIC informtaion to Table PKPS unsuccessful |
| 857 | Table PKPS converted successfully |
| 858 | One view could not be converted |
| 859 | Post quantity with 'Save' |
| 860 | Select a control cycle |
| 861 | Select just one control cycle |
| 862 | Select one or more control cycles |
| 863 | Select at least one changeable line and column |
| 864 | &1 of a total of &2 lines were not editable |
| 865 | Do not use a trigger group in production order combination |
| 866 | Vendor &1 is being used actively and cannot be deleted |
| 867 | Customer &1 is being used actively and cannot be deleted |
| 868 | Supplier &1 is locked |
| 869 | Meanwhile, kanban container &1 has been changed by another user |
| 870 | Meanwhile, kanban control cycle has been changed by another user |
| 871 | Control Cycle data has been changed while processing the request |
| 872 | Control Cycle &1 does not match Material &2, Plant &3, Supply Area &4 |
| 873 | Duplicate Control Cycle for Material &1, Plant &2, Supply Area &3 |
| 875 | Error in implementation of BAdI &1 |
| 876 | &1&2&3&4 |
| 877 | Fatal error in custom enhancement of data flow from &1 to &2 |
| 878 | No print queue was entered for printing control cycle |
| 879 | Print queue &1 for control cycle not found |
| 880 | Print queue &1 for kanban card not found |
| 881 | No print queue was entered for printing kanban card |
| 882 | Inconsistent control cycle &1 was excluded. Num.of containers is equal 0. |
| 883 | An error has occurred during displaying of the logs |
| 884 | Inconsistent control cycle &1 &2 &3 has no replenishment strategy |
| 885 | PP-KAB: Storage loc. &1 of plant &2 still uses &3 active control cycles |
| 886 | Storage location &1 of plant &2 is being phased out or no longer valid |