QA - QM : Inspection lots
The following messages are stored in message class QA: QM : Inspection lots.
It is part of development package QL in software component QM-IM. This development package consists of objects that can be grouped under "QM inspection lots".
It is part of development package QL in software component QM-IM. This development package consists of objects that can be grouped under "QM inspection lots".
Message Nr ▲ | Message Text |
|---|---|
| 000 | L O T M E S S A G E I Ds |
| 001 | First create material & |
| 002 | First create c segment of material & |
| 003 | Supplier & does not exist |
| 004 | Error in status management &1 |
| 005 | Order &2 is already being processed by user &1 |
| 006 | Order &1 cannot be processed (system error) |
| 007 | Inspection lot &2 is being processed by &1 |
| 008 | Inspection lot &1 cannot be processed (system error) |
| 009 | Order &1 is not assigned to material &2 |
| 010 | Order &1 is not available or is not a QM order |
| 011 | Order &1 cannot be assigned to plant &2 |
| 012 | Material &2 is being processed by user &1 |
| 013 | Entry for material &1, plant &2 was already changed |
| 014 | The data was saved |
| 015 | No data was found for the specified selection criteria |
| 016 | Function could not be performed - check your selection |
| 017 | Valuation type cannot be determined for material &1 |
| 018 | Check the entry for the plant |
| 019 | Enter either a cost center or an order |
| 020 | Cost center &2 is not available in controlling area &1 |
| 021 | Entry for controlling area is ignored- cost center is missing |
| 022 | Controlling area &1 is not compatible with plant &2 |
| 023 | Order &1 does not exist - check your entry |
| 024 | A statistical order cannot be used as an account assignment |
| 025 | Company code &1 from order &2 is not compatible with plant &3 |
| 026 | You have entered &1 order type - only type 01 is allowed |
| 027 | Inspection lot & is already being processed - changes cannot be made |
| 028 | Inspection lot & is being processed by another user |
| 029 | Partial lot &1 &2 is already being processed |
| 030 | The partial lot & & is being processed by another user |
| 031 | A fatal error occurred during the cancellation of inspection lot & |
| 032 | A fatal error occurred during the cancellation of partial lot & & |
| 033 | Position the cursor on the line you require before calling the function |
| 034 | QM order &1 was saved |
| 035 | Position the cursor before calling the function |
| 036 | You cannot cancel the confirmation |
| 037 | There is no operation that can be confirmed |
| 038 | Sample calculation for partial lot &1 &2 is not possible |
| 039 | Partial lot &1 &2 does not exist |
| 040 | No inspection results are available for the partial lot |
| 041 | Partial lot has no quantity. Sample calculation is not possible |
| 042 | Fatal error - no inspection point records exist for partial lot |
| 043 | Inspection lot &1 is not in the database |
| 044 | No account assignment is specified for order generation |
| 045 | Delivery note cannot be changed- quality inspection is already completed |
| 046 | You cannot cancel GR, since inspection lot is already partly posted |
| 047 | GR cannot be canceled - document qty does not equal inspection lot qty |
| 048 | QM order is assigned to a material |
| 049 | Quantity correction is no longer possible- lot quantity already posted |
| 050 | Either maintain all entries for transaction data or none at all |
| 051 | Deletion periods for lots must be longer than the other periods |
| 052 | Deletion period for operations/characteristics is too short |
| 053 | Deletion period for samples is too short |
| 054 | Archiving period is not compatible with deletion periods |
| 055 | Only '06' order types are allowed (QM order) |
| 056 | The lowest value for the confrmed quantity is &1 &2 |
| 057 | You cannot immediately cancel a confirmation that has just been made |
| 058 | The inspection lot cannot be created because of an error |
| 059 | Material is maintained with revision level |
| 060 | Inspection lot &2 is blocked for user &1 - item without activity |
| 061 | Information about the insp. lot list when there are inventory differences |
| 062 | Selection(s) insufficient for complete difference posting |
| 063 | No division has been assigned to material &1 |
| 064 | Error: Duplicated inspection lot in memory table (lot no: &1) |
| 065 | Incorrect update indicator in internal memory management (UPDKZ= &1) |
| 066 | After change, stock type no longer compatible with document item |
| 067 | Movement type for required transfer posting is missing from table TQ07M |
| 068 | You cannot make a quantity transfer posting for insp. lot &1 |
| 069 | You cannot make a quantity transfer posting for blocked stock |
| 070 | Error when saving the mat. document data for the insp. lot |
| 071 | You have already recorded confirmations for the insp. lot |
| 072 | Samp. calculation can't be reset because of the status of mat. sample &1 |
| 073 | Sample calculation can't be reset because material sample &1 is locked |
| 074 | Sample calculation cannot be reset due to a system error |
| 075 | No quantity correction was made. You do not need to save. |
| 076 | The plant and storage location were not changed. You do not need to save. |
| 077 | No inspection lot could be determined for document item & & & & |
| 078 | Inspection lot & cannot be used for document item & & & |
| 079 | & were found for distributed inspection types |
| 080 | The quality score procedure &2 does not exist for inspection type &1 |
| 081 | Inspection type &1 already assigned to inspection lot origin &2 |
| 082 | Material doc. cancellation not possible since insp. stock transferred |
| 083 | Material doc. cancellation not possible since insp. stock transferred |
| 084 | Sample calculation cannot be reset for origin &1 with samples active |
| 085 | Object links are not deleted but are no longer displayed |
| 086 | Customizing prevents changing or creation of links to inspection lots |
| 087 | A link to inspection lot &1 already exists |
| 088 | Median values that were already saved are not deleted |
| 100 | Inspection lot & & was created |
| 101 | Inspection lot & & was changed |
| 102 | Inspection lot & was not created yet |
| 103 | First maintain table TQ01 for transaction & |
| 104 | No inspection plan was selected |
| 105 | You must enter a material for the origin specified |
| 106 | First create batch & |
| 107 | The create date is in the future |
| 108 | First create manufacturer & |
| 109 | First create customer & |
| 110 | First create supplier & |
| 111 | First create material & |
| 112 | First maintain the c segment of material & & |
| 113 | The end date of the inspection is in the past |
| 114 | Batch & does not exist in storage location & |
| 115 | The start date of the inspection is in the past |
| 116 | Order & was not created yet |
| 117 | No plan specification could be found for the selection criteria |
| 118 | A specification was assigned to the inspection lot |
| 119 | You cannot enter a material for the specified origin |
| 120 | Supplier &1 does not exist for purchasing organization &2 |
| 121 | The inspection specification was assigned and the sample size calculated |
| 122 | Delete the long text first |
| 123 | Additional inspection types are being modified |
| 124 | No change documents exist |
| 125 | Material & is marked for deletion |
| 126 | In charac. & &, unit & is not compatible with the unit & in the material |
| 127 | No customer was assigned to the inspection lot |
| 128 | Sample size was calculated |
| 129 | Enter the start date as well as the end date |
| 130 | The start date cannot be after the end date |
| 131 | Enter a date in at least one date field |
| 132 | A date you have entered is not compatible with the calculated date |
| 133 | The start date and the end date are identical |
| 134 | Specification(s) not yet assigned |
| 135 | No document data is available for the lot |
| 136 | No operations were generated for inspection lot &1 |
| 137 | No supplier was assigned to the inspection lot |
| 138 | The original material document could not be found |
| 139 | Inspection type & is not defined |
| 140 | No material was assigned to the inspection lot |
| 141 | Origin & is not defined |
| 142 | To activate QM, the inspection stock for the material must be empty |
| 143 | The status tables are not correctly maintained for key & & |
| 144 | Revision level & is not defined for material & |
| 145 | A usage decision has still to be made |
| 146 | The unit of measure & is not supported |
| 147 | The & will be rounded off |
| 148 | To deactivate QM, the inspection stock for the material must be empty |
| 149 | Instruction cannot be printed- inspection without inspection plan |
| 150 | Error inserting QALS: & & |
| 151 | Instruction cannot be printed- no sample was calculated |
| 152 | Error changing QALS : & |
| 153 | Error changing AFKO : & |
| 154 | Error inserting QMAT : & & & |
| 155 | Error changing QMAT : & & & |
| 156 | Error deleting QMAT : & & & |
| 157 | Tables QAMV and QAPO are inconsistent |
| 158 | Certain purchase orders are still open |
| 159 | No operation data is available |
| 160 | Internal error for & MEMORY |
| 161 | No inspection lot was selected |
| 162 | The print control was not maintained correctly |
| 163 | Enter a quality score procedure |
| 164 | No inspection lot could be selected |
| 165 | Maintain a quality score procedure for inspection type & |
| 166 | No additional quality inspection possible - Insp.lot already closed |
| 167 | Lot stock is fully posted - quantity postings therefore completed |
| 168 | Choose a sample size that is not greater than the lot size |
| 169 | Plant & is not supported |
| 170 | You do not have authorization for inspection type &1 in plant &2 |
| 171 | Inspection plan & was assigned to the inspection lot |
| 172 | GR processing time (& days) is shorter than the insp. duration (& days) |
| 173 | Error while executing the print report |
| 174 | Choose a sample size greater than zero |
| 175 | The sample-drawing instruction was already printed |
| 176 | The inspection instruction was already printed |
| 177 | Maintain table TQ37T for language & |
| 178 | Maintain table TQ37T for item & and language & |
| 179 | Internal error in form &- incorrect transmission data |
| 180 | First maintain table TQ38 for & & |
| 181 | Access to inspection lot & is not allowed |
| 182 | First maintain table TQ36 for & & |
| 183 | Sample drawing instruction cannot be printed- no samples were calculated |
| 184 | No task list was assigned to the inspection lot |
| 185 | Sample size could not be calculated |
| 186 | No inspection lot could be created for item & |
| 187 | Preparation for the quality inspection could not be completed |
| 188 | No routing was assigned to the order |
| 189 | No purchasing organization was maintained |
| 190 | You selected the wrong transfer parameters for the function module |
| 191 | Enter a valid date |
| 192 | No material is assigned to the order |
| 193 | The order does not contain any items |
| 194 | In the production order the quantity to be produced is 0 |
| 195 | A routing was already assigned via the order |
| 196 | The date is after the specified end of the factory calendar |
| 197 | The start date of the inspection is not a valid workday |
| 198 | The date is before the specified start of the factory calendar |
| 199 | The factory calendar & is not defined |
| 200 | The end date of the inspection is not a valid workday |
| 201 | Supplier/Manufacturer & does not exist |
| 202 | Material & does not exist |
| 203 | No Q-info record found for material &, rev.level &, suppl. & and plant & |
| 204 | Edit the entries for the blocking functions completely |
| 205 | Maintain certificate type & |
| 206 | Maintain control key & |
| 207 | Plant & cannot be found |
| 208 | Goods receipt for material &1 and supplier &2 is blocked |
| 209 | Goods receipt for supplier & is blocked |
| 210 | Certificate of type & is required |
| 211 | A certificate of type & is also required for subsequent deliveries |
| 212 | Routing & was assigned and sample size calculated |
| 213 | The batch is copied from the order |
| 214 | Inspection type & has already been assigned |
| 215 | There is no Q-info record for material &1 and supplier &2 |
| 216 | Inspection type & is not assigned to origin & |
| 217 | There is no variant for origin & |
| 218 | Inspection type & is not available in the QINF record |
| 219 | An inspection lot already exists for order & |
| 220 | QM in procurement is not active |
| 221 | Enter a supplier first |
| 222 | Enter a material first |
| 223 | Enter a plant first |
| 224 | No inspection types available in the QINF record |
| 225 | Error while changing QINF record & & & |
| 226 | The data was not completely transferred to the QINF update |
| 227 | No variants for inspection type are possible for origin & |
| 228 | No inspection lot can be opened for this material and supplier |
| 229 | The QINF record & & & is being processed |
| 230 | You have already recorded an item for material & supplier & |
| 231 | Enter an inspection type |
| 232 | Error while importing from memory & & |
| 233 | No plan selection can be made for plan type & |
| 234 | & materials were processed |
| 235 | No inspection lot origin was assigned to inspection type &1 |
| 236 | Internal error while creating inspection lot |
| 237 | Data was not completely transferred |
| 238 | You cannot make a transfer posting without a serial number |
| 239 | The sample-drawing instruction is printed when you leave the transaction |
| 240 | The inspection instruction is printed when you leave the transaction |
| 241 | Sample was not calculated |
| 242 | Customizing for inspection type definition is not completely maintained |
| 243 | Fatal error - inspection lot & not found |
| 244 | Fatal error - partial lot & & not found |
| 245 | Inspection type &1 must not be deactivated |
| 246 | Check the Customizing table for inspection type & |
| 247 | The order & is already being processed |
| 248 | Internal error- undefined return code from & |
| 249 | You must mark at least one partial lot for the UD selection |
| 250 | Enter an inspection lot number or use the selection function |
| 251 | Incorrect call for inspection lot maintenance function module |
| 252 | Enter a batch number |
| 253 | The preparatory steps for the quality inspection could not be completed |
| 254 | Maintenance of sample size is only permitted for lots without plan |
| 255 | Material &1 &2 is blocked and cannot therefore be processed |
| 256 | No material was processed |
| 257 | You cannot create an inspection lot |
| 258 | Material document for lot was not found- quantity correction not possible |
| 259 | Quantity correction for origin &1 is not supported |
| 260 | Order type &1 of the QM order does not correspond to plant specifications |
| 261 | You must specify a business area |
| 262 | The QM order does not contain any costs |
| 263 | Cost display- report group does not exist |
| 264 | Costs were determined- see cost overview |
| 265 | You are not authorized to display the costs |
| 266 | No QM order is assigned to inspection lot &1 |
| 267 | You cannot correct the actual quantity, since a serial number is required |
| 268 | You cannot correct actual quantities for insp. lots of origin &1 |
| 269 | The inspection results were already transferred to the classification |
| 270 | Batches to be classified are not available for the inspection lot |
| 271 | No partial lots are available for the inspection lot |
| 272 | The batches assigned to the inspection lot were classified |
| 273 | Batches cannot be classified with this inspection lot |
| 274 | Inspection stock available for material &1 &2 |
| 275 | Sample size could not be calculated |
| 276 | Task list could not be found although it was defined for this inspection |
| 277 | There is no specification for this material |
| 278 | No inspection plan could be found |
| 279 | There is no specification for this material |
| 280 | No valid inspection type for material &2 was found or selected |
| 281 | There is no Q-info record for material &1 and supplier &2 |
| 282 | Manual lots cannot be used for origin & |
| 283 | Set 'Preferred inspection type' indicator for either insp. type &1 or &2 |
| 284 | No inspection results were entered for partial lot &1 |
| 285 | Insp. point field combination &1 does not exist |
| 286 | Unit of measure &1 cannot be converted to material base unit of measure |
| 287 | Sample processing during inspections for delivery is not allowed |
| 288 | No relevant objects exist in the object list for the order |
| 289 | Act. qty. corrections not possible, due to stock transfer to other plant |
| 290 | Error in inspection lot management (QPL1_CHECK_LOT_COLLECTION) |
| 291 | No inspection setup data exists for material &1 in plant &2 |
| 292 | The inspection lot for the sample requires insp. point type for samples |
| 293 | No default values are maintained for inspection type & in Customizing |
| 294 | Defective QMAT record (&1 &2) transferred to update |
| 295 | The inspection lot &1 is locked and could not be updated |
| 296 | Order changes are not copied to the inspection lot |
| 297 | There should be entries for these three fields |
| 298 | You cannot correct actual qty, since insp. lot created by reversal doc. |
| 299 | Inspection type is activated and insp. lots are created for insp. type & |
| 300 | Inspection type &1 (goods issue) is already active |
| 301 | Inspection type &1 (delivery) is already active |
| 302 | At least one additional inspection type was not activated |
| 303 | Actual qty correction is not poss., because the insp. lot has no mat. doc |
| 304 | No data is available, since 'Insp. lot w/o task list and chars' was set |
| 305 | The 'Active' indicator is canceled for inspection type & |
| 306 | The indicator 'Preferred inspection type' is canceled for insp. type &1 |
| 307 | The 'Active' indicator is canceled for inspection type &1 |
| 308 | You can longer confirm for the order & |
| 309 | Goods receipt blocked for this purchasing document item by QM |
| 310 | Customer enhancement QAAT0002 has been incorrectly implemented |
| 311 | Could not read the text for the inspection type |
| 312 | A category &1 inspected certificate is required |
| 313 | A category &1 inspected cert. is also required for follow-up deliveries |
| 314 | & materials cannot be processed because of missing authorizations |
| 315 | Transfer posting not possible since the stock is managed using HUs |
| 316 | Actual quantity correction not allowed for handling units |
| 317 | Inspection lot cannot be created |
| 318 | Inspection plan & does not exist |
| 319 | Specify whether a certificate of type &1 is included |
| 320 | No inspection lot assigned |
| 321 | Number of containers in inspection lot must not be larger than 999,999 |
| 322 | No inspection points have been created for the material samples |
| 323 | Insp. point field combination for inspection plan &1 counter &2 incorrect |
| 324 | BAdI &1 has been implemented more than once |
| 330 | Follow-up action & cannot be used |
| 331 | Follow-up action &1 not allowed for usage &2 |
| 332 | The Active indicator must be set for activation |
| 340 | Inspection lot &1 for order &2 not updated; usage decision already made |
| 341 | Inspection lot &1 for order &2 not updated; inspection lot blocked |
| 342 | Inspection lot &1 for order &2 not updated; error when changing |
| 343 | Please enter all 3 Task List parameters Type, Group, Group Counter |
| 344 | Task list with Type: &1, Group: &2, Group Counter: &3 does not exist |
| 345 | Please check sample procedure &1 due to issues or enter another valid one |
| 346 | Please check dynamic rule &1 due to issues or enter another valid one |
| 349 | Select a partial lot for function 'Find Follow-Up' |
| 350 | Select a partial lot for function 'Split Partial lot' |
| 351 | Quantity greater than actual partial lot quantity. Check your entry. |
| 352 | Usage decision for partial lot &1 has not yet been made |
| 353 | Inspection lot and partial lot are already closed |
| 354 | Inspection Lot &1: New Partial Lot ID > 999999 - Partial Lot not created |
| 355 | No equipment expected for inspection origin &1 |
| 356 | No functional location expected for inspection origin &1 |
| 400 | You are not authorized to create this inspection lot |
| 401 | You are not authorized to change this inspection lot |
| 402 | You are not authorized to display this inspection lot |
| 403 | You are not authorized to correct actual quantities for this insp. lot |
| 404 | You are not authorized to complete this lot with open charcs or insp. pts |
| 405 | You are not authorized for inspection completion and usage decision |
| 406 | You are not authorized to display usage decisions for this inspection lot |
| 407 | You are not authorized to digitally sign this usage decision |
| 408 | You are not authorized for quantity transfer postings for this insp. lot |
| 409 | You are not authorized to cancel sample determination for this insp. lot |
| 410 | You are not authorized to digitally sign the sample-drawing confirmation |
| 411 | You are not authorized to display inspection results for this insp. lot |
| 412 | You are not authorized to edit inspection results for this insp. lot |
| 413 | You are not authorized to sign inspection results for this inspection lot |
| 414 | You are not authorized to create inspection points for this insp. lot |
| 415 | You are not authorized to change inspection points for this insp. lot |
| 416 | You are not authorized to display inspection points for this insp. lot |
| 420 | Inspection Lot &1: Serial Number &2 does not exist yet |
| 421 | Inspection Lot &1: No serial numbers exist at all |
| 422 | Inspection Lot &1: No serial numbers exist for partial lot &2 |
| 423 | Inspection Lot &1: DB record for serial number &2 exists already |
| 450 | >>>> New messages for Q-costs > 4.0A <<<< |
| 451 | QM order &1 will be created when you save |
| 452 | No QM order was created |
| 453 | Functional area &1 was derived from order type &2 |
| 480 | Inspection type &1 not taken into account as authorization missing |
| 481 | Inspection type &1 is not relevant and is not taken into account |
| 494 | You cannot transfer stock; batch settings differ in relevant plants |
| 495 | Change the inspection stock of material & in QM only |
| 496 | Material &1 &2 is not inspection-relevant for inspection type &3 |
| 497 | You cannot transfer stock of material &1 to plant &2 |
| 498 | Enter the sample size manually |
| 499 | No inspection type is available or selected for origin & |
| 500 | The indicator 'Post to inspection stock' is not set for inspection type & |
| 501 | No quality score procedure is planned for inspection type &1 |
| 514 | The inspection lot &1 has been cancelled |
| 515 | You cannot cancel inspection lot &1 |
| 516 | No inspection lots were canceled |
| 517 | Inspection lot canceled -> see details |
| 518 | Cancelation of inspection lot &1 is not possible |
| 520 | Inspection type &1 is not maintained |
| 550 | Creation of inspection lot is not supported by this function. |
| 551 | Inspection lot &1 not updated: Lot does not exist or is archived. |
| 552 | Inspection lot &1 not updated: Data for update is outdated. |
| 553 | Inspection lot &1: Start of inspection cannot be after the end. |
| 554 | Inspection lot &1: Provide start of inspection as well as end. |
| 555 | Inspection lot &1: Provide at least start or end of inspection. |
| 556 | Inspection lot &1: Update for field &2 not supported by this function. |
| 557 | Inspection lot &1: Start date of inspection is not a valid workday. |
| 558 | Inspection lot &1 not updated: Status prohibits data change. |
| 600 | HU inspection lot & exists with batch &. Batch cannot be changed |
| 601 | Inspection Lot &1: Issues with Update of Serial Number List |
| 602 | Inspection Lot &1: Update of Serial Number List |
| 603 | Inspection Lot &1: Update of list of Serial Numbers with &2 errors |
| 604 | Partial Lot &1-&2: Issues with Update of Serial Number List |
| 605 | Partial Lot &1-&2: Update of Serial Numbers with &3 errors |
| 606 | Partial Lot &1-&2: Update of Serial Number List |
| 607 | P.-Lot &1: New Serial Numbers (SN): &2, Unchanged SN: &3, Removed SN: &4 |
| 608 | I.-Lot &1: New Serial Numbers (SN): &2, Unchanged SN: &3, Removed SN: &4 |
| 620 | HU inspection lot &1 exists with different storage location &2 |
| 650 | Status of inspection lot &1 prohibits extension by new operations |
| 651 | Inspection lots with origin &1 can't be extended by new operations |
| 652 | Routing for inspection lot &1 was changed incompatibly |
| 653 | Inspection lot &1 is missing characteristics of newly created operations |
| 654 | Sampling for new operations for inspection lot &1 failed |
| 655 | Status of operation of order &1 does not allow characteristic creation |
| 660 | Event for new operations for inspection lot &1 not raised |
| 800 | Status conversion in client & was successfully completed |
| 801 | Application: QM Client: & |
| 802 | Database modification for status conversion was not fully completed |
| 803 | Existing status information from QM will be deleted |
| 823 | Internal error when saving change document &1 |
| 835 | To record, position cursor on the operation number |
| 898 | Note the format when entering code group and code |
| 899 | Stock-relevant inspection types are not activated |