QE - RM-QSS Fehlertexte zur Ergebniserfassung
The following messages are stored in message class QE: RM-QSS Fehlertexte zur Ergebniserfassung.
It is part of development package QE in software component QM-IM-RR. This development package consists of objects that can be grouped under "QM results recording".
It is part of development package QE in software component QM-IM-RR. This development package consists of objects that can be grouped under "QM results recording".
Message Nr ▲ | Message Text |
|---|---|
| 001 | Not supported in browser. Please use SAP GUI for Windows or alternative. |
| 025 | The characteristic was not selected. Characteristic navigation not poss. |
| 026 | The program sets the attribute |
| 027 | Attribute is only used for defects in the formula calculation |
| 028 | You can only create &1 single values for each characteristic in this view |
| 029 | The parameter value for the user parameter &2 is invalid. |
| 030 | Please consider parameter "Lots with Usage Decision" |
| 033 | Maximum number of samples has been reached |
| 034 | Only & more samples can be created for this characteristic |
| 035 | Maximum number of inspection points has been reached |
| 036 | Only & more inspection points can be created for this operation |
| 037 | No further inspection units can be created |
| 038 | Results confirmation already exists for insp. unit &1 |
| 039 | No results confirmation exists for inspection unit &1 |
| 040 | This is the last insp. unit to be processed |
| 041 | This is the first insp. unit to be processed |
| 042 | No partial samples defined for characteristic & & & |
| 043 | You have not created any partial samples for the characteristic |
| 044 | View for characteristic overview was changed |
| 045 | The last characteristic to be processed has been reached |
| 046 | The first characteristic to be processed has been reached |
| 047 | For insp. unit &1 of charac. 2, no catalog confirmation posssible |
| 048 | No inspection description can be recorded for insp. unit &1, charac. &2 |
| 049 | Insp. unit &1 was not transferred because of defective results |
| 052 | X |
| 056 | Invalid field content for quantitative inspection characteristic. |
| 057 | Invalid field content for code characteristic. |
| 058 | Invalid field content for number of defects. |
| 059 | Invalid field content for nonconforming units. |
| 060 | Invalid field content for qualitative valuation. |
| 061 | Characteristic &1 of inspection lot &2 not found. |
| 062 | No sample specification exists for characteristic &1 of inspection lot &2 |
| 063 | Input processing failed for characteristic &1 of inspection lot &2 |
| 064 | Inspection lot &1: Inspection with inspection points is not supported |
| 078 | No inspection characteristic exists for confirmation no. &1, insp. lot &2 |
| 079 | Program cannot be called up directly (include program) |
| 080 | The values should have a maximum of &1 decimal places |
| 081 | Unplanned characteristic must be a long-term characteristic |
| 082 | Function cannot be performed |
| 083 | Operation &1 cannot be processed |
| 084 | The inspection lot is blocked by user & |
| 085 | No inspection point data found for operation & |
| 086 | Enter an operation |
| 087 | Process messages exist for operation &1 |
| 088 | No process messages available |
| 089 | Results transfer from process interface not possible |
| 090 | No material specification assigned to characteristic & |
| 091 | Results confirmation error. Characteristics cannot be created. |
| 092 | Check your entries |
| 093 | The results transaction cannot be used for this inspection |
| 094 | The results transaction cannot be used for this inspection |
| 095 | The entry for key & & & is locked in the work list table |
| 096 | The inspection lot is blocked completely |
| 097 | Selection criteria not unique for the inspection charac. to be displayed |
| 098 | No inspection characteristic exists for confirmation no. & |
| 099 | No confirmation number exists for inspection characteristic & |
| 100 | The operation is already blocked by user & |
| 101 | System error occurred during the locking procedure |
| 102 | Select one item |
| 103 | Material master does not exist |
| 104 | Inspection lot does not exist |
| 105 | Inspection plan characteristic for characteristic & does not exist |
| 106 | Inspection plan does not exist |
| 107 | The starting value for the assignment of sample numbers cannot be 0 |
| 108 | The increment for the assignment of sample numbers cannot be 0 |
| 109 | Enter the corresponding work center. |
| 110 | Enter the plant for the work center |
| 111 | The master record for work center & does not exist |
| 112 | Order & does not exist |
| 113 | Order & is not released |
| 114 | Characteristic in skip. Set to status "Being processed" for confirmation |
| 115 | No entry for unplanned characteristics in control table TQSS |
| 116 | The last operation to be processed has been reached |
| 117 | No conditional characteristics available for controlling charac. & |
| 118 | Characteristic & is not a controlling characteristic |
| 119 | Not all characteristics were selected |
| 120 | Number range interval not found for characteristic confirmation number |
| 121 | No internal number assignment for confirmation number |
| 122 | Number range object does not exist for characteristic confirmation number |
| 123 | The number of assigned confirmation numbers is 0 |
| 124 | Inspection method & & & does not exist |
| 125 | Master inspection characteristic & & & does not exist |
| 126 | Sampling procedure & does not exist |
| 127 | No inspection method specified in plan characteristic & |
| 128 | No master inspection characteristic specified in plan characteristic & |
| 129 | No sampling procedure specified in plan characteristic & |
| 130 | No long text available for plan characteristic & |
| 131 | Set either the acceptance or the rejection indicator |
| 132 | Characteristic & is an unplanned characteristic |
| 133 | Dependent characteristics were loaded for controlling characteristic & |
| 134 | Dependent characteristics to be processed for the controlling charac. |
| 135 | Internal error reading calculated characteristic &1 &2 |
| 136 | The serial number you entered is not assigned to the inspection lot |
| 137 | No serial numbers have been assigned to the inspection lot |
| 138 | You have not selected an entry |
| 139 | Enter the inspection unit number or serial number for the single unit |
| 140 | Formula cannot be evaluated for unplanned characteristics |
| 141 | Inspection characteristic & was not read |
| 142 | Inspection characteristic must be saved before it can be processed |
| 143 | Enter a master inspection characteristic |
| 144 | Only completely maintained master inspection characteristics are allowed |
| 145 | Inspection characteristic was created with number & |
| 146 | The list is incomplete |
| 147 | More than & records were loaded. Limit your selection. |
| 148 | Select a status |
| 149 | There is no change document for characteristic & |
| 150 | There is no change document for sample &1 &2 |
| 151 | You have not selected a change document |
| 152 | No available long text for description for class & of charac. & |
| 153 | No available long text for description for single unit & of charac. & |
| 154 | No long text exists for insp. description for characteristic &/sample & |
| 155 | No long text available for inspection description for characteristic & |
| 156 | You can only create new samples for characteristics IN PROCESS |
| 157 | If you enter an * the target value is entered in the offset field |
| 158 | You have not yet entered a single value |
| 159 | The number of classes is 0 |
| 160 | Enter an inspection lot for which you want to record results |
| 161 | No inspection lot was selected |
| 162 | Inspection lot & does not exist |
| 163 | Enter at least one criterion for the inspection lot selection |
| 164 | No inspection lot could be selected |
| 165 | No default settings for plant & exist |
| 166 | No plausibility factor for plant & defined in the default settings |
| 167 | Defect class & does not exist |
| 168 | Position the cursor on a valid table line |
| 169 | No catalog entries for insp. charac. & are maintained in the task list |
| 170 | Enter an * for the selection |
| 171 | Default settings for plant & contain no characteristic weighting |
| 172 | No entry defined in Table TQ76T for processing status & |
| 173 | Key & for the external numbering is not defined |
| 174 | The inspection unit number or serial number you entered already exists |
| 175 | Enter a inspection unit number or serial number |
| 176 | The number of nonconforming units is 0 |
| 177 | The number of nonconforming units is not 0 |
| 178 | Only enter the reference for one document |
| 179 | Internal error generating defect record |
| 180 | No PRT assigned to the operation/task list characteristic |
| 181 | Characteristic results cannot be recorded for inspection lot & |
| 182 | Results cannot be recorded |
| 183 | You have reached the first operation to be processed |
| 184 | Characteristic &1 was not found |
| 185 | A long text still exists for the insp. description |
| 186 | For charac. &1, first line of long text in the insp. description is empty |
| 187 | For single value &1, first line of long text in insp. descr. is empty |
| 188 | For class &1, first line of long text in inspection description is empty |
| 189 | For sample &1, first line of long text in insp. description is empty |
| 190 | No inspection description exists |
| 191 | There is no change document for characteristic(s) &1 |
| 192 | There is no change document for sample(s) &1 |
| 193 | The value &1 should have a maximum of &2 decimal places |
| 194 | Internal error when creating defect record |
| 203 | System error: no entry for transaction code defined in Table TQ70 |
| 204 | No samples exist |
| 205 | Enter a sample |
| 211 | No inspection plan was read |
| 212 | No single units selected for lot & |
| 213 | No operations were selected for lot & |
| 214 | No characteristics were found |
| 215 | Sample specification record does not exist for characteristic & & & & |
| 217 | Sample specification record does not exist for characteristic &1 &2 |
| 218 | Only sample numbers greater than 0 are allowed |
| 231 | The end date of the inspection is before the start date |
| 232 | The inspection date is in the future |
| 233 | The inspection date is earlier than the lot creation date |
| 234 | The inspection time is in the future |
| 264 | You have not recorded characteristic results for operation & |
| 265 | Results were saved for operation & |
| 268 | Valuation function module for sample & & does not exist |
| 269 | Error during dynamic modification- no valuation rule available |
| 270 | For inspection lot &, results rec. by characteristic is not supported |
| 275 | You have not selected an inspection operation for inspection lot & |
| 276 | Defect class &1 is not defined |
| 277 | Inspection lot & does not contain an insp. operation & in plan sequence & |
| 278 | Function module for charac. &1 with valuation rule &2 does not exist |
| 279 | Internal error during dynamic modification- no valuation rule |
| 280 | Tolerance key & is not defined |
| 289 | Entry & & is not in Table Q78. System error |
| 290 | Entry & & is not defined in table TQ78 (system error) |
| 291 | Entry & & is not in Table Q36. System error |
| 292 | Plan characteristic & & & & is not in table PLMK |
| 294 | X |
| 295 | No entry for key &2 &3 &4 defined in table &1 |
| 296 | "Create characteristics" operation was not completed successfully |
| 297 | Operation 'Determine samples' was not completed successfully |
| 298 | No inspection plan is assigned to the inspection lot |
| 299 | Inspection is to be carried out without a task list |
| 300 | Conversion factor for sample UoM & not maintained for charac. & & |
| 301 | No entry found in inspection lot status table for & & |
| 302 | No entry found in plan characteristic table with node number & |
| 303 | Internal error- no entries in table & |
| 304 | Inspection lot & has no inspection operations |
| 305 | Node number & is greater than the maximum node number in the charac. |
| 306 | The operation control key does not specify any inspection characteristics |
| 315 | The entries for the processing table are incorrect |
| 320 | Number of dependent multiple samples was not determined |
| 321 | Maximum number of samples is already reached |
| 335 | Valuation not possible for multiple samples |
| 336 | The partial samples have not been created yet |
| 337 | No authorization for this function |
| 338 | Function was cancelled |
| 339 | The sample was set for processing |
| 340 | The characteristic was set for processing |
| 341 | The samples were successfully valuated |
| 342 | Valuation for & sample(s) ended with an error - see error message list |
| 343 | No sample could be valuated |
| 344 | Closing of & sample(s) ended with an error - see error message list |
| 345 | No sample could be closed |
| 346 | Processing of samples was closed |
| 347 | & conditional characteristic(s) not valuated - see error message list |
| 348 | The valuation of the sample &1 was successful |
| 349 | The valuation of the characteristic &1 was successful |
| 350 | Characteristic/Sample must be processed before it can be valuated |
| 351 | The valuation was successful |
| 352 | Valuation of & characteristic(s) ended with error- see error message list |
| 353 | No characteristic was valuated |
| 354 | You have not entered enough values for this attributive inspection |
| 355 | You have entered too many values for this attributive inspection |
| 356 | Enter the mean value so that a variable inspection is possible |
| 357 | You have to enter the standard deviation for this variable inspection |
| 358 | The attribute is invalid- the selected function is not supported |
| 359 | The number of valid values is not correct for this variable inspection |
| 360 | Valuate the characteristic (partial sample) manually on the single screen |
| 361 | K-factor not defined- a valuation is not possible |
| 362 | The mean value is not defined- a valuation is not possible |
| 363 | The standard deviation is not defined- a valuation is not possible |
| 364 | Internal error loading tables |
| 365 | Internal error- the number of valid values was changed manually |
| 366 | Internal error - sample tables do not exist |
| 367 | Not all samples were valuated - (characteristic valuation not successful) |
| 368 | No valid samples exist for the characteristic |
| 369 | The function could not be carried out |
| 370 | Selected set is not available |
| 371 | The code group does not exist |
| 372 | The code is not available |
| 373 | The code is not assigned to the selected set |
| 374 | Another error occurred during the share estimate |
| 375 | A system error occurred during the share estimate |
| 376 | A user error occurred during the share estimate |
| 377 | A user error occurred during the share estimate |
| 378 | Share was estimated for the characteristic |
| 379 | Share was estimated for the sample |
| 380 | Share can only be estimated for characs. or samples being processed |
| 381 | Statistics for the characteristic were calculated |
| 382 | Statistics for the sample were calculated |
| 383 | Statistics are only calc. for characteristics (samples) being processed |
| 384 | You did not adhere to the sample size- valuation cannot be carried out |
| 385 | No valid values available- valuation cannot be carried out |
| 386 | You have used an incorrect valuation function module |
| 387 | & linked characteristic(s) have yet to be closed |
| 388 | Errors occurred during formula evaluation |
| 389 | Not all calculation input characs. in the formula have been valuated |
| 390 | Internal error: Not all sampling tables were loaded |
| 391 | Internal error- not all single result tables were loaded |
| 392 | Formula was not evaluated correctly for all partial samples |
| 393 | Error occurred during formula evaluation -> see attribute |
| 394 | Formula was evaluated successfully |
| 395 | Charac. &1 was not defined in the task list as a calculated charac. |
| 396 | Formula evaluation for & characteristic(s) ended with error- see log |
| 397 | Formula evaluation was carried out |
| 398 | You cannot enter negative values |
| 399 | You have not yet recorded valid measured values |
| 400 | The input value must be between 0 and 1 |
| 401 | The number of nonconforming units is greater than the inspection scope |
| 402 | The required inspection scope has been reached |
| 403 | The inspected sample size does not correspond to the required insp. scope |
| 404 | The input value & is too small. Check your entry |
| 405 | The input value & is too large. Check your entry |
| 406 | The field cannot be maintained if the value is 0 |
| 407 | No. of values below tolerance range is greater than inspection scope |
| 408 | No. of values above tolerance range is greater than inspection scope |
| 409 | Check whether you have kept to the specified inspection scope |
| 410 | The absolute frequency in class & is greater than inspection scope |
| 411 | The inspected sample size is 0 although defects were found |
| 412 | The mean value is outside the tolerance range |
| 413 | All individual values are outside the tolerance range |
| 414 | No codes are assigned to selected set & & & & |
| 415 | The value you have entered is too high. Check your entry |
| 416 | The use of partial samples is not supported for this characteristic |
| 417 | Not all calculated input characteristics have been valuated |
| 418 | Sample(s) set for processing |
| 419 | The characteristics were set for processing |
| 420 | You have not yet created partial samples for characteristic &1 &2 &3 |
| 421 | Sample &1 does not exist in characteristic &2 &3 &4 |
| 422 | Single values or classes are not allowed for characteristic &1 &2 &3 |
| 423 | You have not yet recorded single values for characteristic &1 |
| 424 | The valuation is incorrect. Setting the attribute to invalid. |
| 425 | Further samples are required |
| 426 | For charac. &1 &2 &3 single values can only be recorded for samples |
| 427 | No partial samples defined for characteristic &1 &2 &3 |
| 428 | Standard deviation is set at 0 |
| 429 | Factor &1 was corrected for value &2 |
| 430 | The smallest factor possible is &1 |
| 431 | The largest factor possible is &1 |
| 432 | Factor &1 is too small. It is being reset to the smallest factor &2. |
| 433 | Factor &1 is too large. It is being set to the largest factor &2. |
| 434 | You do not have authorized access to charac. & & |
| 435 | You do not have authorized access for sample & & |
| 436 | Internal error- entry & & is not in the internal table |
| 437 | Internal error |
| 438 | The minimum value is greater than the mean value |
| 439 | The maximium value is smaller than the mean value |
| 440 | The minimum value is greater than the maximum value |
| 441 | The number of inspected sample units is being corrected |
| 442 | No detailed results allowed for characteristic & & & |
| 443 | The valuation of the inspection result has the invalid value &1. |
| 448 | Successfully closed |
| 449 | Sample & & was set for processing |
| 450 | Characteristic & was set for processing |
| 451 | Characteristic &1 was closed. &2 |
| 452 | Sample &1 was closed. &2 |
| 453 | The valuation is rejected although value lies within tolerance range |
| 454 | The inspected sample size is greater than the planned sample size |
| 455 | The inspected sample size is smaller than the planned sample size |
| 456 | The inspected sample size does not correspond to the planned sample size |
| 457 | None of the characteristics has been closed |
| 458 | Error when closing & characteristic(s)- see error message list |
| 459 | Characteristic (s) & could not be set for processing (see log) |
| 460 | Sample(s) & could not be set for processing (see log) |
| 461 | The statistics for the characteristic (sample) were reset |
| 462 | You must enter a text for the characteristic result |
| 463 | You must enter an inspection description for a rejected characteristic |
| 464 | You must enter an inspection description for code & & |
| 465 | Processed conditional characteristics exist that cannot be closed |
| 466 | Unprocessed conditional characteristics exist for the controlling char. |
| 467 | Not all samples are closed (characteristic is not closed) |
| 468 | Open conditional characs. still exist for the controlling characteristic |
| 478 | Error in memory management of QM results recording |
| 479 | The entry cannot be deleted (mark it as invalid) |
| 480 | You can only delete characteristics or samples being processed |
| 481 | You cannot delete the entry here |
| 482 | Cannot close due to principle of dual control |
| 483 | Characteristics are only closed once the signature process is complete |
| 484 | Characteristics could not be closed because signing was canceled |
| 485 | A selected characteristic is already in a signature process |
| 486 | The signature process can no longer be canceled |
| 487 | No characteristic has an open signature process |
| 488 | No signatures exist for this characteristic |
| 489 | Dependent calculated characteristics available w. current signature proc. |
| 500 | You have confirmed defects and still accepted the characteristic (sample) |
| 501 | Enter a measured value for this quantitative characteristic |
| 502 | Enter a code for this qualitative characteristic |
| 503 | Enter a valuation for this qualitative characteristic |
| 504 | You have not selected an inspection operation |
| 505 | The operation does not exist for the insp. lot (and work center) entered |
| 506 | Select a characteristic filter |
| 507 | Select one entry |
| 508 | You cannot use characteristic filter &1 for this function |
| 509 | Check the default value for the valuation |
| 510 | No inspection operations exist for the inspection lot |
| 511 | No. of defects must be greater than no. of nonconforming units |
| 512 | Check the number of defects-. The valuation is 'accept' (A) |
| 513 | No inspection characteristic was selected |
| 514 | The number of defects is limited to '9999' |
| 515 | Operation & for the inspection lot & does not exist |
| 520 | The long-term inspection for the inspection lot was activated |
| 521 | Characteristic & & is not a long-term characteristic |
| 524 | The error message list has no entries |
| 529 | The system resets the valuation of the partial sample |
| 548 | No further characteristic with detailed results available |
| 557 | Position the cursor on a valid table entry |
| 559 | An initial value is not possible for the mean value (& valid values) |
| 560 | You can only select codes for code group & |
| 561 | The code & is not contained in code group & |
| 562 | Code & of code group & is not contained in selected set & |
| 570 | The inspection instruction was printed & |
| 571 | Different sample units of measure used & <> & |
| 572 | Error in print report & |
| 573 | Sample-drawing instruction & was printed |
| 574 | No work center for sample &, node number &, inspection lot & |
| 575 | No characteristics available for printing |
| 576 | No operation available for characteristic records when printing |
| 577 | No sample specifications exist for printing |
| 578 | No printout required or no print information available |
| 579 | Maintain print report & in print control |
| 580 | Maintain order type & in print control |
| 581 | Maintain transaction number & in print control |
| 582 | Maintain user & in print control |
| 583 | Number of entries is different in QAMVTAB and QASVTAB |
| 584 | No short text maintained for inspection method & |
| 585 | No short text maintained for characteristic weighting & |
| 586 | No valuation function modules available |
| 587 | Inspection charac. & has no valuation function module for rule & |
| 588 | No sample specifications exist for characteristic & |
| 590 | Error printing layout set- text element & is not in window & |
| 591 | Error printing layout set- layout set was not initialized with OPEN_FORM |
| 592 | Error printing layout set- layout set was not opened with START_FORM |
| 593 | Window $ missing or name incorrect |
| 594 | Error during SAPscript processing |
| 595 | Print dialog was discontinued |
| 596 | Equipment type for printing layout sets is not valid |
| 597 | The layout set defined in the print control is not available |
| 598 | The selected print options are not valid |
| 599 | Error printing layout set- another layout set is still open |
| 604 | Check value & for the standard deviation |
| 608 | You have confirmed numbers for an open marginal class |
| 610 | The number of valid values is 0 |
| 611 | Value $ of a number field is not meaningful |
| 612 | Error in function module $ |
| 613 | The inspection characteristic does not have a tolerance range |
| 614 | No mean value available for the measured values |
| 615 | No standard deviation available for the measured values |
| 616 | Defect class entry was activated |
| 617 | Defect class entry was deactivated |
| 618 | Tabular single-value recording was activated |
| 619 | Tabular single-value recording was deactivated |
| 650 | Download of & inspection lot operation records was successful |
| 651 | No entries found |
| 690 | This line cannot be selected |
| 700 | ==== Control chart messages 701 - 750 ======= |
| 701 | Control chart type &1 not allowed |
| 702 | No control chart type found |
| 703 | No SPC criterion found |
| 704 | Control chart type &1 does not exist |
| 705 | SPC criterion &1 does not exist |
| 706 | Control chart blocked by &1 |
| 707 | SPC criterion &1 cannot be used |
| 708 | Track &2 for control chart type &1 does not exist |
| 709 | Control chart &1 does not exist |
| 710 | Track &2 for control chart &1 does not exist |
| 711 | The use of quality control charts is not supported for characteristic & |
| 712 | Inspection results are not complete |
| 713 | Unexpected error occurred when the test was called |
| 714 | There are still graphics windows open |
| 715 | SPC criterion and characteristic cannot be combined |
| 716 | Track &1 of the control chart does not contain any data |
| 717 | Control limits for track &1 could not be calculated |
| 718 | The SPC characteristic indicator is reset |
| 719 | The function is not supported |
| 720 | There is insufficient data available |
| 721 | There is not enough data to create a histogram |
| 722 | The data for the histogram is inconsistent |
| 723 | A histogram cannot be displayed for characteristic &1 |
| 724 | Internal error in control chart &1 |
| 725 | Object is already being processed. Displaying chart only. |
| 726 | Error in integral track parameter &1 for control chart type &2 |
| 730 | Data for printing a run-chart is missing |
| 731 | Data for the run-chart is inconsistent |
| 732 | No run-chart can be displayed for characteristic &1 |
| 733 | No QM STI evaluation can be carried out for characteristic &1 |
| 740 | No data could be exported |
| 750 | First exit the current results processing session |
| 760 | Inconsistencies in control chart &1 prevent valuation |
| 761 | System determines start of inspection |
| 801 | An update termination occurred (&, table &, RC &) |
| 802 | Insert to QAOPERATION started on &1 at &2 |
| 803 | Insert to QAOP: client &1 started at &2 |
| 804 | Insert to QAOP: client &1 completed with &2 new entries at &3 |
| 805 | Insert to QAOP: completed with &1 new entries at &2 |
| 807 | Update not allowed for table &1 (NONCONFORM = &2) |
| 818 | There are no results for sample &2 in operation &1 |
| 819 | The last sample to be processed for the characteristic has been reached |
| 820 | The first partial sample has been reached |
| 821 | Partial sample & already exists for characteristic & |
| 850 | You are not allowed to analyze for inspection lot plant &1 |
| 851 | You are not allowed to analyze for inspection lot plants |
| 852 | You are not allowed to analyze for materials and plant &1 |
| 853 | You are not allowed to analyze for materials |
| 854 | You are not allowed to analyze for inspection types and plant &1 |
| 855 | You are not allowed to analyze for inspection types |
| 856 | You are not allowed to analyze for master charc. plants and plant &1 |
| 857 | You are not allowed to analyze for master characteristic plants |
| 858 | You are not allowed to analyze for master characteristics and plant &1 |
| 859 | You are not allowed to analyze for master characteristics |
| 860 | You are not allowed to analyze for suppliers and plant &1 |
| 861 | You are not allowed to analyze for suppliers |
| 862 | You are not allowed to analyze for customers and plant &1 |
| 863 | You are not allowed to analyze for customers |
| 864 | You are not allowed to analyze for manufacturers and plant &1 |
| 865 | You are not allowed to analyze for manufacturers |
| 866 | You are not allowed to analyze for batches and plant &1 |
| 867 | You are not allowed to analyze for batches |
| 868 | You are not allowed to analyze aggregated data for plant &1 |
| 869 | You are not allowed to analyze aggregated data for plants |
| 918 | There are no sample results & for operation & |
| 919 | The last sample to be processed for the characteristic has been reached |
| 920 | The first partial sample has been reached |
| 921 | Partial sample & already exists for characteristic & |
| 999 | TEST &1 &2 &3 |